TCS Configuration in MIRO

Hi All
We have to configure TCS for buying scrape, vendor is giving scrape by adding TCS
e.g 500 material Plus 50 TCS = 550
pl give me configuration steps
Thanks in advance
Vishvas B

Hi,
You can create a condition type for this requirement but certificate wont get generate.
Regards,
Sankar

Similar Messages

  • Tax collected at source(TCS) configuration from the FI side

    Hi,
    We are implementing the tax collected at source. We have configured the following steps:
       1. Define Withholding Tax key (206C)
       2. Define Withholding Tax type
       3. Create the access sequence for withholding for TCS in SD
    (Copy the existing access sequence J1AW and create the new access sequence)
       4. Create condition types corresponding to Tax collected at Source in SD
       5. Assign withholding tax types to SD condition types
       6. Define withholding tax codes
       7. Assign GL accounts for withholding tax types
       8. Add TCS conditions in pricing procedure
       9. creating non statistical new condition types and added them to the SD pricing procedure.
      10.Create the account keys for non statistical condition types and assign them in the pricing procedure.
      11. assign the G/L accounts for the new account keys in VKOA.
    after this when we try to post the invoice we get the error as "posting keys are missing for the transaction JT1" (JT1 is our account key).
    To solve this error we have made the configuration for this account key in OBCN and then in OB40 but after that we are getting the error as tax code is not defined in TAXINN procedure.
    Please guide if we need to create the  new tax codes in FTXP for this or we need to make any changes in tax procedure for TCS??
    Any help will be greatly appreciated.
    Thanks & regards
    Puneet Agrawal

    Hi,
    i am also facing same problem. Did you get any solution of this ? Please share this
    Thanks in advance,
    Vishal

  • CIN - TCS configuration in SAP

    Dear Friends,
    We are facing problem in creating the withholding tax for TCS. As per Income tax TCS Basic is 1% for scrap sales, Education Cess (ECS) on TCS is 2% and Higher Education Cess (SEC) is 1% on TCS.
    I have created 3 withholding tax codes(T1 for TCS base, T2 for ECS and T3 for SEC). My SD consultant have maintained the condition type for all three (JTCS, JTEC & JTSE) as statistical and J1IW for FI posting. I have maintained the GL accounts for Transaction type OFF and WIT for each tax codes. in VK11 we have maintained the material on which the TCS to be calculated and the rate 0f 1%. We have also maintianed for ECS and SEC @2% & 1%.
    The issue we are facing is when we are creating the sales order, in the sales order condtion type the total taxable (TCS, ECS and SEC) is calculating perfectly. While processing the Invoice the accounting entry is happeing only for TCS and not for ECS and SEC. I am also not finding any entries for Challan update.
    Can any one help me what are all configuration set up i am missing. I am working 1st time with CIN. Don't have much idea what are all step to be followed. I am very greateful for your inputs.
    Regards,
    Devendran

    Hi,
    You need to check account determination configuraiton for WHT.
    Go to the menu:   Financial Accounting > Financial Accounting Global Settings > Withholding Tax > Extended Withholding Tax > Postings > Define Accounts for Withholding Tax to be Paid Over
    You should have specified GL a/cs for each of the three tax codes you have created.
    If you had selected posting indicator, then you may also need to specify Offsetting account.  For this in the same section, go to menu Define Accounts for Withholding Tax Offsetting Entry.
    Note that you need to specify GL accounts separately per tax code.
    Hope this solves.
    Muru

  • TCS Configuration

    Hi All,
    Can Any Body Tell me the Configuration of Tax collect at source in Scrap sale case?
    Regards
    Jugal Kishor

    Hi,
    You can create a condition type for this requirement but certificate wont get generate.
    Regards,
    Sankar

  • Tax in MIRO

    Hi All
    I have all the essential configuration for MIRO, but when I go for saving the document a massage shows me error regarding tax. It flashes only output tax is allowed. What will the solution.

    Dear,
    It is because of G/L Account.
    Kindly check concern G/L Account ( Tcode-- FS00) under CONTROL TAB in TAX CTEGORY FIELD it might be maintain for OUTPUT TAX only do maintain it as * for both INPUT as well as OUTPUT TAX  and retry process.
    But before doing so do consult ur FI Consultant as he must have set due to some reason.
    Regards
    AJIT K SINGH
    HAPPY TO HELP U
    Edited by: AJIT K SINGH on Jan 7, 2010 9:28 AM

  • VAT Rounding off during MIRO

    Dear SAP Guru's,
    I would like to know what has to be done to round off the VAT amount during MIRO. We have configured the rounding off rule 17 in our Tax pricing procedure and it works for PO. I could the amount gets rounded off in PO pricing procedure. But during MIRO the VAT amount shows in decimal that I donu2019t want. I tried my best to find out the configuration part.
    I have tried the Company code setting in the SPRO -> Logistic General -> Goods movement. But there is option for Excise related settings there, not for VAT. The condition types master also maintained for commercial round off.
    Where is the configuration for MIRO. I could see some forum threads for writing the Routine. Is it we need to go for Routine?? There is no standard setting where we can define it??
    Your inputs are valuable for me.
    Regards,
    Devendran Dhanapal
    Edited by: DEVENDRAN DHANAPAL on Aug 16, 2011 10:35 AM

    Dear NAresh,
    Thanks for your comments, I have checked this thread. We have did all the settings mentioned in that. The rounding off rule 17 will work for the FI direct entries and PO pricing. But it does not work for MIRO.
    But I don't have much Idea about writting a Routine. Is it advicable to for it??
    Regards,
    Devendran Dhanapal.

  • Extending Withholding Tax & MIRO

    Hi gurus: I wanted to ask you guys whether the Extending withholding tax configuration affects MIRO. At present we dont have tax configured on our PO's and hence does not affect MIRO. We are only using MIRO in the US and not across the world.
    In another country I have configured Extending W/H Tax. When we do roll this out to that country, will I have to watch out for something that affects MIRO and Extending W/H Tax?
    Please advise
    thanks
    Brian

    Hi Brian,
    MIRO transaction supports Extended Withholding Tax. This extended withholding tax details are entered in Vendor master data , no where we will enter the data in P.O.
    If you use MIRO then Classic withholding tax doen't support.
    Hope this clarifies. If helpful please assign points as a way of thanks.
    Thanks & Regards
    D.K.Lakshmi Narayana

  • F.13 Automatic Clearing of customers subject to EWT

    Hi All
    Customer is subjected to withholding tax (in our case TCS). We have received down payment and appropriate amount of TCS (configured as EWT) was deducted. Now an invoice is generated for an equal amount which is appearing in Customer amount (i.e. net of TCS).
    When we are running F.13, system is not clearing the Customer account (Message is "Items with withholding tax code for customer subject to withholding tax").
    My question is that if customer/vendor is subjected to EWT, will system clear the open items by executing F.13?
    Regards
    Rajesh

    Hi Rajesh,
    Please use transaction F110 to clear the invoices with their reversals! For testing purpose, you can make a payment proposal and check what happens
    For background information, please check attached note 499902 which talks about SAPF124/E:No clearing of documents with withholding tax.
    Assign points if it useful.
    Regards
    Ravinagh Boni

  • CIN - J1IG - Import Scenario

    Hi,
    My client having Trading Registration.They purchase import raw material and selling the same to customer.So i have to capture excise invoice in J1IG after GRN.Here , in import scenario i mentioned zero tax code and maintained all standard tax conditon like J1CV , JADC etc.. in pricing procedure.Also maintained these conditons in Excise defualts CIN Configuration.After MIRO with customs invoice , i put GRN.When i tried for J1IG w.r.t Mat Document, system didnt pick up the excise value.
    Kinldy tell me any IMG setting has to done or have to manually enter all excise duties for import scenario.
    Thanks and Regards
    Sumathi.S

    Hi
    check following link
    [Depot Import purchase Scenario;
    [http://wiki.sdn.sap.com/wiki/display/ERPMan/DepotActivities-+CIN]
    [Taxes not getting copied in J1IG transaction;
    Regards
    Kailas ugale

  • Tax Collected at Source - Certificate

    Hi
    We are entering manually the TCS (Tax Collected at Source) amount at the time of payment only. Is this the case, can we generate a TCS Certificate ? 
    Your valuable inputs are welcome.
    Regards

    earlier SAP has not support the TCS (india), but very recently they had released one note exclusively for TCS configuration and code correction. When i attend the SAP summit at banglore i asked the SAP and they promised us to release the note.
    note no. 1168591, dt. 12.05.2008 here u can find the configuration document screen shot wise provided by SAP
    along with that also implement the 1172387, dt. 07.08.2008 this note for maintain separate acknowledgment numbers for Form 26Q/27Q
    remaining process is same like TDS
    as per your support package some more notes my also require to implement.
    if u are in ECC 5 support package SAPKH50019 or ECC 6 - SAPKH60013, above notes are enough, if your below the support package level u have to implement some more notes.
    apply the above notes and test
    all the best

  • Duplicate entry at migo

    hi expert
    AT migo level when i enter delievery note and header text system is accepting duplicate values i.e values which are already entered , but  at Miro level  system  does not allow duplicate values,we have done configuration at MIro  so i want system should also stop me when i entered duplicate values at migo level.Please help me in this issue
    Regards
    Edited by: usmfarhan on Dec 19, 2008 7:20 AM

    Hi
    The said requirement is well addressed if the material is excisable. Ie; In customizing we can say one gr per excise invoice and the system checks this duplication.
    Whereas in MIGO without excise this is not available in STD SAP.
    Try enhancement MBCF0002 and component EXIT_SAPMM07M_001 and check for the same. I have used this to check for the posting date of MIGO w.r.t PO.
    Reg
    Raja

  • Dummy business place

    hi experts,
    I`m looking for inputs on use of dummy business place with respect to WHT (TDS & TCS) configuration for India. Under the current scenario, we have multiple business place and one section code to be setup. But I need inputs on whether we need to assign this one section code to all business places or create a dummy business place (with same name as section code) and assign thisu under the WHT configuration and use this dummy BP and real section code in WHT postings.
    Hoping to get some inputs on this!
    Thanks
    SGP

    Dear Paneer,
    As per SAP note 818732
    a) Availability of two function modules namely - J_1I_VAT_TAX_ACCOUNT_DETRMINE and J_1I_VAT_TAX_ACCOUNT_DET_SD. These function modules are part of the function group J1I4 and belong to the Development Class J1I2.
    b) Program changes that call these function modules in the relevant programs.
    c) A new table - J_1IT030K and its view to maintain the alternate G/L account on the basis of the Business Place, Tax code, Account key.
    I am maintianing GL 's in mentioned table
    Rgds
    ManiSuma

  • MIRO with Aggregation: configurable material

    Hi,
    We have Created PO for a configurable material  where we specified the char. values for variant
    at the time of the MIGO we specified the char. values in   Batch classification.
    Now while doing MIRO we selected the layout Aggregation: configurable material
    System is is showing 4 fields char 1 char 2 char 3 char 4 but all values are blank
    Why not system is picking the values  ???
    Thanks in advance
    Edited by: Jeyakanthan A on Dec 14, 2011 10:52 PM

    hello anant,
    In my opinion for sure standard sap report cannot display the stock for a individual configuration.(Variant)
    Reason:characteristics display/hide function is very dynamic dependeding on the dependency and interdependency.
    The only option is by a report CL30N plus abap. Since we cannot keep anything in stock for a configurable material. You need to identify all open sales order and stock position OR through material movements and then find the produciton order and then read all char. values.
    I assume you are not taking about variant materials.
    Reg
    Samson.

  • Configure baseline date (MIRO)

    Dear all gurus,
    Can anyone tell me where to configure the baseline date in the MIRO with a default value based on the posting date (which is equivalent to today's date)?
    Thanks.
    Edwin.

    Dear SE,
    What is the MRM_ASSIGNMENT? It is not a t-code after I tried. Can you explain a little bit more because I'm still new. Sorry.
    Thanks for your prompt reply.
    Regards,
    Edwin

  • Configure Multiple Tax Codes to appear in MIRO

    Hi,
    We have a scenario where a PO was created with a line item which had an incorrect tax code (A1 instead of A0).  It has been posted and GR.  When posting the invoice I would like to correct the tax code for that line item, however I only have the option of A1 or blank.  How can I configure the system to allow more than one tax code to be available for selection at a line item level.
    I have played around with the Tax Tab in MIRO to add A0 there, and that results in the drop down box in the header to display A0, but it is still not available in the line item view.
    Thanks
    Natalie

    Thanks, we have removed the default setting, but that does not change the available options.  Instead it just defaults it to blank, but I still can only select blank or A1.
    The only way that I can get A0 to appear in the header drop down is to add it at the header level Tax tab, where it list all available tax codes. 
    When i go back to the Basic data Tab the drop down contains:
    A1 (Input (10%) Tax Deductible)
    A0
    <blank>
    So it doesn't display the description of tax code A0, so it is like it knows that it shouldn't be there.
    Even though A0 is listed in the header section, I am unable to select it at the line item level.

Maybe you are looking for