TDMS - Writing a "Group" with data timestamp and values

I'm trying to make building my trends from timewaveform max/mins easier. Right now I have two TDMS groups: Measurement Data and Events. Measurement data is the timewaveform data for all 32 channels. The events group has two channels: Timestamps and Trend Data. Is there a better way to organize these groups to build my trends easier. Ideally I would want my data sent to my trend plot to have Measurement Data (Channel Name), Events (Timestamp), Events (Trend Data).
What I want is similiar to what is contained in a waveform (to, dt, y) except I have a varying to and don't need the dt.
This post may not make much sense, but I've found it much more difficult to build these trends then I think it needs to be.

Hi LabViewer35242,
I do not completely understand your question, would you provide some diagram, or code that you are working on?
I would like to better understand this issue. Here you can find a TDMS tutorial.
Regards,
steve.bm
AE | NI

Similar Messages

Problem with Date Picker and wwv_flow_item.date_popup()

I have a Report based on the HTMLDB How-To âBuild Tabular Forms for Multi-Row Operationsâ
This is my code:
select
X.RRIT_UID,
X.DOS,
X.CPT_CODE,
X.MOD,
X.DX_CODE,
X.CHARGES,
X.UNITS
from
(select
htmldb_item.text(1,RRIT_UID) RRIT_UID,
wwv_flow_item.date_popup(2,null,RRIT_DATE_OF_SERVICE) DOS,
htmldb_item.text(4,RRIT_SUBMIT_SERVICE_CODE,6) CPT_CODE,
htmldb_item.text(5,RRIT_SUBMIT_MODIFIER,3) MOD,
htmldb_item.text(6,RRIT_ATT_DIAG_CODE,6) DX_CODE,
htmldb_item.text(7,RRIT_BILLED_CHARGES,9) CHARGES,
htmldb_item.text(8,RRIT_UNITS,3) UNITS
from
RRIT_REPRICE_ITEM
where
RRRR_UID = :P5_RRRR_UID
union all
select
htmldb_item.text(1,null) RRIT_UID,
wwv_flow_item.date_popup(2,null,null) DOS,
htmldb_item.text(4,null,6) CPT_CODE,
htmldb_item.text(5,null,3) MOD,
htmldb_item.text(6,null,6) DX_CODE,
htmldb_item.text(7,null,9) CHARGES,
htmldb_item.text(8,null,3) UNITS
from
dual)
X
My problem is when I run the page and select a date from the Pop-Up calendar I get this error:
Line 10
Error: âopener.document.forms.0.f02.0â is null or not an object
I know it is something to do with data formats and the fact that I do not fully understand the use of wwv_flow_item.date_popup().

Hi DK,
It is a WD Java application, Backend is ABAP (MM module).
The UI is input field, where the context attribute type is Date, So its been changed to Date Picker.
The problem is when the user runs the WD application in Portal, The calendar format is being changed for some users. That is for few users the Week starts with Monday and for few users the week starts with Sunday.
I need all the users to have Monday as the First day of the week.
Please let me know, what will be solution for this.
Since I haven't done anything in regard to date, it is a simple Date format.
Thanks & Regards,
Palani

With 10.7.2 update iCal does not allow you to set "Reminders" by draging events from "All Day Events" into "Reminders" is there another way to do this instead of having to type out the entire reminder with date, time, and type?

With 10.7.2 update iCal does not allow you to set "Reminders" by draging events from "All Day Events" into "Reminders" is there another way to do this instead of having to type out the entire reminder with date, time, and type?
With Lion 10.7.1. you where able to drag events from "All Day Events" into the "Reminders" bar to create upcoming reminders.

Exactly the same question I was about to post!
Great being able to sync reminders (well overdue) however if I have to re-type a calener envent into reminders it's a waste of time!!
Come on Apple!!
Just need an option for the calender event to add to reminder or the old drag to add to reminder functionality back, Please???

Create prompt with date-filter and initialize it with current date

Oracle BI 11 g
Hi!
I need to create dashboard prompt with date-filter and initialize it with current date. How can I do that?
I tried to create repository initialization block and add variable. But I don't know what should I write to DataSource? I tried to use functions Now(), Current_Date, sysdate (for example, SELECT Now() FROM tbl_Calendar) but without results - when I pressed "Test..." button I got errors - something like "Now() is unknown function" or "Incorrect syntax near key word Current_Date".
After that I tied to use Presentation Variable in Prompt, but also without success ((
Please, help me.

I've created Repository Variable "CurrentDate", using SQL-query like this "select convert(varchar(10), getdate(), 104)" and now this variable is being initialized by value "07.04.2011". But I don't understand how to use this varible in DashboardPrompt! What item in list "Default selection" I should choose - "Variable Expression", "Server Variable" or something else? When I chose "Variable Expression" and write "CurrentDate" I got just string "CurrentDate" when preview Prompt. @{CurrentDate} gave me the same result.

DB identifier mismatch with data volujme and log volume

Hi,
I would like to perform backup and restore test on linux (maxdb database ) ECC 6.0 system.
I have taken the backup of (i.e data , incremental and log backups ) on one system.
Then created a new system with same host name, SID and instance number.
Then i Performed to restore the database on the new system in the ADMIN mode.
First i done the data then incremental backup. These are successful on the new system.
But when i performed the log backup it gives the following error as :
Db identifier mismatches with data volume and log volume.
Database then goes to offline state.
How to perform the successful log backup ?
Thanks
Srikanth

Hi,
As you are performing restore on the new machine you have to restore with recovery with initialization option.
for this you have to first create template on the new machine using DBMGUI or DBMCLI for complete_bkp/incremental_bkp and log_bkp's.
It will first restore complete backup after that incremental backup and after that all the available log backups will be applied.After that you will be able to make in online mode.
You can perform this either using dbmgui or dbmcli.
http://help.sap.com/saphelp_nw04/helpdata/en/d1/b386654dc211d4aa1100a0c9430730/frameset.htm
Regards,
Sahil

Help to read a table with data source and convert time stamp

Hi Gurus,
I have a req and need to write a ABAP prog. As soon as i excute ABAP program it should ask me enter a data source name, then my ABAP prog has excute teh code, in ABAP code i have to read a table with this data source as key, sort time stamp from table and should display the data source and time stamp as output.
As follows:
Enter Data Source Name:
Then user enters : 2lis_11_vahdr
Then out put should be "Data source :" 10-15-2008.
The time stamp format in table is 20,050,126,031,520 (YYYYMMDDhhmmss). I have to display as 05-26-2005. Any help would be apprciated.
Thanks,
Ram

Hi Jayanthi Babu Peruri,
I tried to extract YEAR, MONTH, DAY separately and using
EDIT MASK written it.
Definitely there will be some STANDARD CONVERSION ROUTINE will be there. But no idea about it.
DATA : V_TS      TYPE TIMESTAMP,
       V_TS_T    TYPE CHAR16,
       V_YYYY    TYPE CHAR04,
       V_MM      TYPE CHAR02,
       V_DD      TYPE CHAR02.
START-OF-SELECTION.
GET TIME STAMP FIELD V_TS.
V_TS_T = V_TS.
CONDENSE V_TS_T.
V_YYYY = V_TS_T.
V_MM   = V_TS_T+4(2).
V_DD   = V_TS_T+6(2).
V_TS_T(2) = V_MM.
V_TS_T+2(2) = V_DD.
V_TS_T+4(4) = V_YYYY.
SKIP 10.
WRITE : /10 V_TS," USING EDIT MASK '____-__-________'.
          /10 V_YYYY,
          /10 V_MM,
          /10 V_DD,
          /10 V_TS_T USING EDIT MASK '__-__-__________'.
If you want DATE alone, just declare the length of V_TS_T as 10.
Regards,
R.Nagarajan.
We can -

Generate a report with date range and year as POV with Hyp Planning ?

Hi everybody,
I am starting with hyp planning and i need your help please.
I have to create some forms. In those forms, the final user is supposed to be able to display data in the forms between 2 dates and for a specific year.
My first problem : I don't know how you can display data in a form between 2 dates and for one specific year. I just have one dimension YEAR and one PERIOD, so if i selected them as a PAGE, the final user will just be able to choose the month and the year for his form ... and not displaying data between 2 dates.
My second problem is with the dimensions YEAR, SCENARIO and VERSION. I don't want to put the dimensions VERSION and SCENARIO as PAGE (it easier for the final user to just choose a year than to choose a year, scenario, and version) but as POV with a relationship with the dimension YEAR (because if the user chooses YEAR = actual_year (2012) the VERSION and the SCENARIO won't be the same than if the user chooses YEAR= last_year). IF YEAR = next_year, VERSION=Propuesta, SCENARIO=Forecast
IF YEAR = actual_year, VERSION=Propuesta, SCENARIO=Forecast AC
IF YEAR = last_year, VERSION=Actual, SCENARIA=Real
How can i do that?
Thank you for your help
Edited by: 932573 on May 7, 2012 3:44 PM
Edited by: 932573 on May 7, 2012 4:27 PM

I am not sure if you are using RAS or Enterprise SDK, but here are some code snippets to set range report parameters:
For scheduling:
// oReport is IReport object holding the crystal report.
oReportParameter = oReport.getReportParameters().get(i);
currentRangeValue = oReportParameter.getCurrentValues().addRangeValue();
currentRangeValue.getFromValue().setValue(dateParameter);
currentRangeValue.getToValue().setValue(dateParameter);
For viewing:
ParameterFieldRangeValue pfrv = new ParameterFieldRangeValue();
pfrv.setBeginValue(dateTimeValue);
pfrv.setEndValue(dateTimeValue1);
pfrv.setLowerBoundType(RangeValueBoundType.inclusive);
pfrv.setUpperBoundType(RangeValueBoundType.inclusive);
pf.getCurrentValues().add(pfrv);
f.add(pf);
f is Fields object and pass that to viewer.

How to solve delay in a program with data aquisition and processing

Hello, I am a starter in Labview programing. I am working on a system which contains a roller, a piston and a A/D cart which is from Data Translation Inc (DT304). I am using labview to get speed data of the roller (which is voltage first then be converted into speed) from Analog Input Channels, and then using Analog Output Channels to control the friction force being appylied to the roller by using a piston.
I am using a Waveform Chart to show the speed of roller. However, as I am adding more components to the program, I always get delay in the speed display and also the output control of the piston. Also, as I spent more time using the program eg. from morning to night, it became slower too.
My question is, how does labview store data and how are the data been stored and released in the buffer.Is it because I am loading too much data in the buffer so that it became slower? And also how to solve these delays?
I am using the "save to file" function to write data to a ".lvm" file, but I did some changes to the saving by using a button to enable and disable saving. So I don't think the problem is because I am always saving the data into a file.
Thank you very much.
Jessie

I'm betting it's two things:
1. Program Architecture
and 2. Dynamically resizing arrays.
With the program architecture... if you have one do-while loop that acquires data from teh DAQ, processes it, opens/indexes/writes/closes a file, then comes back around... as your arrays and files increase in size, the loop is going to take longer to execute. A Producer-Consumer loop (a good tutorial on them can be found here) has one loop that acquires data and stuffs the data into a queue. This will buffer the data while it's in transition between acquisition and processing. A second loop in parallel takes data in from the queue, processes it, then comes back around. The two loops operate independently of each other, so even if the consumer loop takes longer as the files or math gets more complex, the producer loop continues to run full speed.
Second is the arrays. Every time you append data into an array, LabVIEW has to make a copy of the data that's in the array. If you append small amounts of data to an array over and over and over again, eventually LabVIEW is going to be copying very large amounts of data over and over and over again. The producer-consumer architecture can alleviate this problem.

CREATE DATABASE with data file and log file in query pane

Hi everyone,
After I ran the below code I got the following error message. Can someone help me fix this?
Thanks
CREATE DATABASE project
ON
(Name= 'project_dat',
FILENAME ='C:\project.mdf',
SIZE = 10,
MAXSIZE = 100,
FILEGROWTH = 5)
LOG ON
(NAME = project_log,
FILENAME = 'C:\project.ldf',
SIZE =40,
MAXSIZE = 100,
FILEGROWTH = 10);
Msg 5123, Level 16, State 1, Line 1
CREATE FILE encountered operating system error 5(Access is denied.) while attempting to open or create the physical file 'C:\project.mdf'.
Msg 1802, Level 16, State 4, Line 1
CREATE DATABASE failed. Some file names listed could not be created. Check related errors.
skilo

Hello ,
Please go through by support site :
Use SQL Server Enterprise Manager
Note The instance of SQL Server Enterprise Manager that is included with SQL Server 7.0 does not support setting the default data directory and the default log directory. However, you can register your instance of SQL Server 7.0 in the instance
of SQL Server Enterprise Manager that is included with SQL Server 2000, and you can then follow these steps to set the default data directory and the default log directory for your instance of SQL Server 7.0.
Click Start, point to Programs, point to
Microsoft SQL Server, and then click Enterprise Manager.
In SQL Server Enterprise Manager, right-click your instance of SQL Server, and then click
Properties.
In the SQL Server Properties (Configure) - <Instance Name> dialog box, click the
Database Settings tab.
In the New database default location section, type a valid folder path in the
Default data directory box and in the Default log directory box.
Click OK.
Stop your instance of SQL Server, and then restart your instance of SQL Server.
Ahsan Kabir Please remember to click Mark as Answer and Vote as Helpful on posts that help you. This can be beneficial to other community members reading the thread. http://www.aktechforum.blogspot.com/

Source for Init with data transfer and full load

Hi Experts,
1. Please tell me where the data comes when we do the
    following actions :-
    a) Init with data transfer
    b) Full load
i want to know the source of data i.e (setup table or main table or any other table)
Helpful if you can provide the data-flow.
kindly tell which is prefrable and why?
Regards,
RG

Hi.......
When you do init with data transfer it will read data from the set up table only..........but beside this it will also set the init flag..........due to this from next time any new records will go to the delta queue...........and next time when you run delta load it will pick records from delta queue...........
Now suppose data are alrady available in the BW side...........then you can run init without data transfer.......this will only set the init flag.........it will not pick any records.........
Extraction structure gets data from set up table in case of full upload ............and in case of delta load from delta queue.......
Regards,
Debjani...........
Edited by: Debjani Mukherjee on Sep 20, 2008 11:45 AM

Cisco Tidal 5.3.1 Job Group with (2) completed and the first job group (1) still waiting on Dependency.

We have a job group i.e. Job Group A that creates a second instance of the job group Job Group A (2) and completes normally. The problem is we have another job group that is dependent on Job Group A (1) so it never runs until we cancel the first job group or set it as completed. What could be inserting the Second occurrence of the JOB Group?

This sounds like a repeating job/group with new occurrences. Check out the Options tab for both group and job-levels
Group Options, If job is running, then Run Anyway
Job Options, If job is running, then Run Anyway
The correct setting should be:
Group Options, If job is running, then Run Anyway
Job Options, If job is running, then Defer until Normal or Defer Until Complete
which means if any of the deferred options are selected, the second occurrence will wait until job is completed normally (Defer Until Normal), or wait until job either completes normally or abnormally (Defer Until Complete)
Now I wonder what causes the second instance to complete normally and not the first instance.
BR,
Derrick Au

Diff between init with data transfer and repair full request

hi,
i have observed that even in the new flow we are doing init without data transfer and then repair full request
if i do init with data transfer also i can achieve the same?
i want to know why we need to do this ,do we have any advantage of doing init without transfer and repair full request?
please suggest me

Hi Venkat,
A repair full request is loaded in cases where you get erroneous records or where there are missing records which you want to load. In such cases, a repair full request for the selective records can be loaded and is the most efficient way to correct the data, since you won't be required to load the entire data once again. Also you acheive the desired result without disturbing the delta. (You are not required to do an init w/o data transfer after a repair full, people just do it a a precaution)
However, repair full requests should only be loaded to infoproviders with update mode 'overwrite'. Otherwise, if the InfoProvider, its very probable that you might double the value of the key-figures due to rows being added twice - in case of an InfoProvider with update mode 'Additive'. So, if your InfoProvider is additive, you will need to delete the entire data and do an 'init with data transfer' to avoid corrupting the data. (Note: you can do a repair full request for an additive infoprovider in case of lost records or if you can delete erroneous records with selective deletion.But you have to be careful with the selections lest you inadvertently load other records than required and corrupt the data)

Error when enabling the connection group with office 2013 and a plugIn

Hi,
I've created the office 2013 proplusVolume with ODT, published it globaly, Sequenced the plugin, with only the office 2013 as a published app-v package on the system, made the connection group with correct xml, but when I enable the connection group, I got
the error:
The connection group {xxx} version {xxx} could not be published because the
virtual COM settings of the individual packages conflict.
Verify that the virtual COM settings are the same for all member packages and try again.
The COM settings are made the same as the office package on the plugin package, but I still have the same error.
The Deployment-, and user-XML have this values (as it was for the office originally):
<COM Mode=”Integrated”>
<IntegratedCOMAttributes
OutOfProcessEnabled=”true” InProcessEnabled=”true” />
<Objects Enabled=”false” />
Why do I get this error?
Why is it merly impossible to track down the realy error?
What can i do to make this connection group work?

Right now the catalog is pulling from the AppXManifests inside the AppV Packages. You can see these settings by renaming the AppV file to .ZIP and browsing those files (READ ONLY) to see the default COM settings. Simply changing the Deployment Config files
is not enough. You will need to make sure the information is dynamically applied at publishing by specifying the -DynamicDeploymentConfiguration option when adding the package using the Add-AppvClientPackage cmdlet. You do not need to worry about the UserConfig
file.
If you are doing this in band with the management system, you would import this configuration in under Advanced Configuration for the package.
Steve Thomas, Senior Consultant, Microsoft
App-V/MED-V/SCVMM/Server App-V/MDOP/AppCompat
http://blogs.technet.com/gladiatormsft/
The App-V Team blog: http://blogs.technet.com/appv/
The MED-V Team Blog: http://blogs.technet.com/medv
The SCVMM Team blog: http://blogs.technet.com/scvmm/
“This posting is provided "AS IS" with no warranties, and confers no rights. User assumes all risks.”

Merge Email Address Only Group With Matching Names And Emails Group

Here's the situation:
I have a large list of conacts that are only email addresses and are in a group called Emails Only. I decided to upload the email address to LinkedIn and connect with the people that were in my email list to obtain their full name if they were on LinkedIn. Then, after I connected with a bunch of people, I exported my whole LinkedIn contacts back into my address book in a group I made called LinkedIn.
I then tried to merge my contacts. For some reason the LinkedIn group won't merge with the Email Only group. Shouldn't my address book realize there are multiple contacts with the same email address? Is it an issue that the Email Only list just has emails and no names?
Any help would be much appreciated!

Hi Navgup,
Please refer to the script below, to query users in other domain by specifying the parameter "-Server" in the cmdlet "get-aduser", and also note I haven't tested the script below:
import-module activedirectory
get-adgroupmember "group"|foreach{
$email=(get-aduser $_.samaccountname -properties *).EmailAddress#get the user email
Get-ADUser -filter {EmailAddress -eq $email} -properties * -server DomainB.company.com|select samaccountname, memberof}#filter user name and group with the email in other domain
To get users across domain, please also refer this blog:
Adding/removing members from another forest or domain to groups in Active Directory:
http://blogs.msdn.com/b/adpowershell/archive/2010/01/20/adding-removing-members-from-another-forest-or-domain-to-groups-in-active-directory.aspx?Redirected=true
I hope this helps.

Pie chart with both text and value

Hi,
I want the pie chart to contain both the text and value how is this possible when I look at the optiond for chart I was able to select only one thing at a time both not both the things at a time ,please let me know how is this possible
Thanks
Priya

Hi Priya,
this should be possible. In the Chart Designer in the properties of the Categories you must edit the Format string to e.g. "$Label$br0.00" (show the label, make a line break, show the value with 2 decimals). For more info regarding the format string see note <a href="http://service.sap.com/sap/support/notes/1064448">1064448</a>.
Best regards
Matthias

TDMS - Writing a "Group" with data timestamp and values

Similar Messages

Maybe you are looking for