Technical Issue while Exposing WebCenter webservices to SOA

Hi All,
The problem definition is as of below:
We have two teams working separately on SOA and one on WebCenter.
Scenario:
1.     SOA gives a WSDL, WebCenter creates proxy jar which contain the xsds in a specific structure
2.     WebCenter uses the classes in the proxy jar to construct a method “public soaObject methodName(soaObject)” and then exposes this as a Webservice to SOA.
Problem:
1.     WebCenter exposes webservices by using Java1.5 annotations – meaning, there are no xsds, wsdls or any other configuration file written or generated at build time
2.     When deploying the application, the wsdls-xsds are auto generated by the Weblogic server. The xsds of the input and output objects are now different from the original SOA object xsds. The difference is little but because of this, SOA is not able to use the WC webservice.
The problem in a nutshell is: The XSD from SOA WSDL and the weblogic generated XSD provided back to SOA at the time of Webcenter service exposure do not match,despite being the same XSD's.
Kindly suggest!

Admin password must contain at least one digit

Similar Messages

Issue while installing Flynet Webservice Generator on my laptop

Hi,
I downloaded the 30 day trial version of Xcelsius Engage Server 2008.While trying to install Flynet I am having the following error
An Exception occured in the OnAfterInstall event handler of Licensing Service.ProjectInstaller
-->Cannot start service Flynet CAL Manager for Xcelsius on computer'.' -->The service did not respond to start or control request in a
timely fashion.
I am using the setup.exe in
\SP1\Connectivity\Flynet WebService Generator to install the service.
Please help if possible.
thanks
deepak.
Edited by: Deepak Mangani on Oct 9, 2008 9:17 PM

Deepak's issue was actually dealt with via our support , e.mail support AT flynetviewer.com
But in case anyone else has a similar problem this is probably due to one of two things:
Your operating system is 64 bit , a known issue we have with the Licence Keycode checker routine.
OR , you are running a non-English version of windows. We have fixed this for the next release of the Web service Generator but in the interim we can provide you with a solution.
The quickest way to get support on our Web Service Generator is to e.mail using the address above, although we do check this forum most days.
Ian
Flynet Support
[http://www.flynetviewer.com]
P.S , thanks for the plug for our Webinar Jason
Edited by: Ian Learmonth on Mar 5, 2009 11:19 AM

Getting issue while invoking a webservice.

Hi All
when i invoke a webservice which is located remotley using httpclient post method. I am getting the following error
<faultcode>soapenv:Server.userException</faultcode>
<faultstring>org.xml.sax.SAXException: SimpleDeserializer encountered a child element, which is NOT expected, in something it was trying to deserialize.</faultstring>
Can anyone please help me out how to get out this exception. tried googling on this exception, but there is no luck.
import java.io.File;
import java.io.FileInputStream;
import org.apache.commons.httpclient.HttpClient;
import org.apache.commons.httpclient.methods.InputStreamRequestEntity;
import org.apache.commons.httpclient.methods.PostMethod;
public class PostXML {
public static void main(String[] args) throws Exception {
// Get target URL
String strURL = "http://localhost/services/CmdLineInterface?wsdl";
// Get file to be posted
String strXMLFilename = "C:\\post.xml";
File input = new File(strXMLFilename);
// Prepare HTTP post
PostMethod post = new PostMethod(strURL);
// Request content will be retrieved directly
// from the input stream
// Per default, the request content needs to be buffered
// in order to determine its length.
// Request body buffering can be avoided when
// content length is explicitly specified
post.setRequestEntity(new InputStreamRequestEntity(
new FileInputStream(input), input.length()));
// Specify content type and encoding
// If content encoding is not explicitly specified
// ISO-8859-1 is assumed
post.setRequestHeader(
"Content-type", "text/xml; charset=ISO-8859-1");
// post.set
post.setRequestHeader("SOAPAction", "");
// Get HTTP client
HttpClient httpclient = new HttpClient();
// Execute request
try {
int result = httpclient.executeMethod(post);
// Display status code
System.out.println("Response status code: " + result);
// Display response
System.out.println("Response body: ");
System.out.println(post.getResponseBodyAsString());
}catch(Exception e)
e.printStackTrace();
}finally {
// Release current connection to the connection pool
// once you are done
post.releaseConnection();
the above is the code i am using for calling the webservice.
Anyone can you please help me on this.
Regards
Rakesh

Hi
Thank you very much for replying back..
Here is my WSDL file i am using
This XML file does not appear to have any style information associated with it. The document tree is shown below.
<wsdl:definitions xmlns:apachesoap="http://xml.apache.org/xml-soap" xmlns:impl="urn:test" xmlns:intf="urn:test" xmlns:wsdl="http://schemas.xmlsoap.org/wsdl/" xmlns:wsdlsoap="http://schemas.xmlsoap.org/wsdl/soap/" xmlns:xsd="http://www.w3.org/2001/XMLSchema" targetNamespace="urn:test">

<wsdl:types>
<schema xmlns="http://www.w3.org/2001/XMLSchema" elementFormDefault="qualified" targetNamespace="urn:test">
<element name="in0" type="xsd:string"/>
<element name="processCmdLineRequestReturn" type="xsd:string"/>
</schema>
</wsdl:types>
<wsdl:message name="processCmdLineRequestResponse">
<wsdl:part element="intf:processCmdLineRequestReturn" name="processCmdLineRequestReturn"/>
</wsdl:message>
<wsdl:message name="processCmdLineRequestRequest">
<wsdl:part element="intf:in0" name="in0"/>
</wsdl:message>
<wsdl:portType name="CmdLineInterface">
<wsdl:operation name="processCmdLineRequest" parameterOrder="in0">
<wsdl:input message="intf:processCmdLineRequestRequest" name="processCmdLineRequestRequest"/>
<wsdl:output message="intf:processCmdLineRequestResponse" name="processCmdLineRequestResponse"/>
</wsdl:operation>
</wsdl:portType>
<wsdl:binding name="CmdLineInterfaceSoapBinding" type="intf:CmdLineInterface">
<wsdlsoap:binding style="document" transport="http://schemas.xmlsoap.org/soap/http"/>
<wsdl:operation name="processCmdLineRequest">
<wsdlsoap:operation soapAction=""/>
<wsdl:input name="processCmdLineRequestRequest">
<wsdlsoap:body use="literal"/>
</wsdl:input>
<wsdl:output name="processCmdLineRequestResponse">
<wsdlsoap:body use="literal"/>
</wsdl:output>
</wsdl:operation>
</wsdl:binding>
<wsdl:service name="CmdLineInterfaceService">
<wsdl:port binding="intf:CmdLineInterfaceSoapBinding" name="CmdLineInterface">
<wsdlsoap:address location="http://localhost:8080/test/services/CmdLineInterface"/>
</wsdl:port>
</wsdl:service>
</wsdl:definitions>
Regards
Rakesh

Facing issue while deployment on 11.1.1.6 soa server

Problem Summary
Facing issue while deployment on 11.1.1.6 soa server
Problem Description
We are facing issue while deploying a bpm project over a newly built bps-soa server 11.1.1.6.
While we are deploying a bpm project, first it is taking around 40mins to create .jar file and then while deploying, it is getting failed with transaction timed out error.
"composite: Onboarding: javax.ejb.EJBException: Transaction Rolledback.: weblogic.transaction.internal.TimedOutException: Transaction timed out after 301 second".
we have tried with changing all transaction parameters also like JTA,XA( as similar to our exiting running QA/PROD environment which is on 11.1.1.5) but even then facing the same issue.
The code were originally build over 11.1.1.5 version, for the first time opening with jdev, code gets migrated and over the upgraded code we did some business specific changes and now trying to deploy over the new server.
Code is getting successfully compiled and also .jar file is creating properly but while deployment facing error(As shared earlier).
Also tried to deploy the same .jar file using em consle(to soa-infra) but facing similar issue.
Error Codes
Problem Category/Subcategory
BPM 11g installation issues
Uploaded Files
Template Question Responses
1) ### Product Versions Including Build Numbers ###
BPM SOA suite 11.1.1.6
2) ### Is the Issue Reproducible ###
Yes, mentioned in issue detailes.
3) ### OS Version ###
SunOS xxxxx 5.10 Generic_144488-06 sun4v sparc SUNW,T5440
More logs:
Name
=== ODM Data Collection ===
[2013-02-27T01:10:59.436-05:00] [soa_server1] [WARNING] [] [oracle.soa.bpel.engine.deployment] [tid: [STUCK].ExecuteThread: '12' for queue: 'weblogic.kernel.Default (self-tuning)'] [userId: weblogic] [ecid: 486af90ee4d37577:-6eb9b41c:13d15783e85:-8000-000000000000142f,1:18454:2] [APP: soa-infra] Unable to obtain the audit metadta java.lang.IllegalStateException: The transaction associated with this transaction-scoped persistence context has been rolled back and as a result, the EntityManager has been closed. No further operations are allowed in this transaction context. Please see the server log for the cause of the rollback.
[2013-02-27T01:11:17.402-05:00] [soa_server1] [WARNING] [] [oracle.soa.bpel.engine.deployment] [tid: [STUCK].ExecuteThread: '12' for queue: 'weblogic.kernel.Default (self-tuning)'] [userId: weblogic] [ecid: 486af90ee4d37577:-6eb9b41c:13d15783e85:-8000-000000000000142f,1:18454:2] [APP: soa-infra] Unable to obtain the audit metadta java.lang.IllegalStateException: The transaction associated with this transaction-scoped persistence context has been rolled back and as a result, the EntityManager has been closed. No further operations are allowed in this transaction context. Please see the server log for the cause of the rollback.
[2013-02-27T01:11:18.147-05:00] [soa_server1] [NOTIFICATION] [] [oracle.soa.bpel.engine.deployment] [tid: [STUCK].ExecuteThread: '12' for queue: 'weblogic.kernel.Default (self-tuning)'] [userId: weblogic] [ecid: 486af90ee4d37577:-6eb9b41c:13d15783e85:-8000-000000000000142f,1:18454:2] [APP: soa-infra] BPEL Component "default/Onboarding!2.0*soa_8130f118-f9b5-462a-8e75-5ec0f34b45bd/Remediation" successfully loaded.
[2013-02-27T01:11:18.166-05:00] [soa_server1] [ERROR] [] [oracle.soa.bpel.engine] [tid: [STUCK].ExecuteThread: '12' for queue: 'weblogic.kernel.Default (self-tuning)'] [userId: weblogic] [ecid: 486af90ee4d37577:-6eb9b41c:13d15783e85:-8000-000000000000142f,1:18454:2] [APP: soa-infra] Unable to activate process Remediation[[
javax.ejb.EJBException: Transaction Rolledback.: weblogic.transaction.internal.TimedOutException: Transaction timed out after 300 seconds
BEA1-172EC48037986ACD0C13
at weblogic.transaction.internal.ServerTransactionImpl.wakeUp(ServerTransactionImpl.java:1788)
at weblogic.transaction.internal.ServerTransactionManagerImpl.processTimedOutTransactions(ServerTransactionManagerImpl.java:1676)
at weblogic.transaction.internal.TransactionManagerImpl.wakeUp(TransactionManagerImpl.java:1988)
at weblogic.transaction.internal.ServerTransactionManagerImpl.wakeUp(ServerTransactionManagerImpl.java:1586)
at weblogic.transaction.internal.WLSTimer.timerExpired(WLSTimer.java:35)
at weblogic.timers.internal.TimerImpl.run(TimerImpl.java:273)
at weblogic.work.SelfTuningWorkManagerImpl$WorkAdapterImpl.run(SelfTuningWorkManagerImpl.java:545)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:256)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:221)
; nested exception is: weblogic.transaction.internal.TimedOutException: Transaction timed out after 300 seconds
BEA1-172EC48037986ACD0C13
weblogic.transaction.internal.TimedOutException: Transaction timed out after 300 seconds
BEA1-172EC48037986ACD0C13
at weblogic.transaction.internal.ServerTransactionImpl.wakeUp(ServerTransactionImpl.java:1788)
at weblogic.transaction.internal.ServerTransactionManagerImpl.processTimedOutTransactions(ServerTransactionManagerImpl.java:1676)
at weblogic.transaction.internal.TransactionManagerImpl.wakeUp(TransactionManagerImpl.java:1988)
at weblogic.transaction.internal.ServerTransactionManagerImpl.wakeUp(ServerTransactionManagerImpl.java:1586)
at weblogic.transaction.internal.WLSTimer.timerExpired(WLSTimer.java:35)
at weblogic.timers.internal.TimerImpl.run(TimerImpl.java:273)
at weblogic.work.SelfTuningWorkManagerImpl$WorkAdapterImpl.run(SelfTuningWorkManagerImpl.java:545)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:256)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:221)
javax.ejb.EJBException: Transaction Rolledback.: weblogic.transaction.internal.TimedOutException: Transaction timed out after 300 seconds
BEA1-172EC48037986ACD0C13
at weblogic.transaction.internal.ServerTransactionImpl.wakeUp(ServerTransactionImpl.java:1788)
at weblogic.transaction.internal.ServerTransactionManagerImpl.processTimedOutTransactions(ServerTransactionManagerImpl.java:1676)
at weblogic.transaction.internal.TransactionManagerImpl.wakeUp(TransactionManagerImpl.java:1988)
at weblogic.transaction.internal.ServerTransactionManagerImpl.wakeUp(ServerTransactionManagerImpl.java:1586)
at weblogic.transaction.internal.WLSTimer.timerExpired(WLSTimer.java:35)
at weblogic.timers.internal.TimerImpl.run(TimerImpl.java:273)
at weblogic.work.SelfTuningWorkManagerImpl$WorkAdapterImpl.run(SelfTuningWorkManagerImpl.java:545)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:256)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:221)
; nested exception is: weblogic.transaction.internal.TimedOutException: Transaction timed out after 300 seconds
BEA1-172EC48037986ACD0C13
at weblogic.ejb.container.internal.EJBRuntimeUtils.throwEJBException(EJBRuntimeUtils.java:156)
at weblogic.ejb.container.internal.BaseLocalObject.postInvoke1(BaseLocalObject.java:595)
at weblogic.ejb.container.internal.BaseLocalObject.__WL_postInvokeTxRetry(BaseLocalObject.java:455)
at weblogic.ejb.container.internal.SessionLocalMethodInvoker.invoke(SessionLocalMethodInvoker.java:52)
at oracle.bpm.bpmn.engine.ejb.impl.BPMNServerManagerBean_6gbx7k_IBPMNCubeServerManagerLocalBeanImpl.deployComponent(Unknown Source)
at oracle.fabric.CubeServiceEngine.load(CubeServiceEngine.java:842)
at oracle.bpm.bpmn.engine.service.BPMNServiceEngine.load(BPMNServiceEngine.java:636)
at oracle.bpm.bpmn.engine.service.BPMNServiceEngine.load(BPMNServiceEngine.java:151)
at oracle.integration.platform.blocks.deploy.CompositeDeploymentConnection.deployComponents(CompositeDeploymentConnection.java:243)
Caused by: weblogic.transaction.internal.TimedOutException: Transaction timed out after 300 seconds
BEA1-172EC48037986ACD0C13
at weblogic.transaction.internal.ServerTransactionImpl.wakeUp(ServerTransactionImpl.java:1788)
at weblogic.transaction.internal.ServerTransactionManagerImpl.processTimedOutTransactions(ServerTransactionManagerImpl.java:1676)
at weblogic.transaction.internal.TransactionManagerImpl.wakeUp(TransactionManagerImpl.java:1988)
at weblogic.transaction.internal.ServerTransactionManagerImpl.wakeUp(ServerTransactionManagerImpl.java:1586)
at weblogic.transaction.internal.WLSTimer.timerExpired(WLSTimer.java:35)
at weblogic.timers.internal.TimerImpl.run(TimerImpl.java:273)
at weblogic.work.SelfTuningWorkManagerImpl$WorkAdapterImpl.run(SelfTuningWorkManagerImpl.java:545)
... 2 more
FileName
soa_server1-diagnostic-2.log

2 things must be noticed:
First: ODI 11g is not supported by JDK 7, I always use the JDK1.6.0_27 and works fine. When you try to open the ODI Studio, this message appears, telling that ODI is supported only with JDK 6 versions, so don't try to use JDK 7.
Second: I always install the JDK in a path without spaces, like "C:\JDK1.6.0_27\" and the excatly same thing to odi install files. So I call via Command Prompt:
C:\ODI_INSTALL\Disk1\setup.exe -jreLoc C:\JDK1.6.0_27\
I did over 20 windows installations using these settings, it'll work perfectly.
Regards.
Luiz Araujo

JCo destination error while executing the webservice model

Hi,
I have explained what I have done so far and whats my issue right now.
My requirement is calling a PI interface (exposed as webservice) from webdynpro for java and setting some parameter value to the PI interface based on which our functional flow will continue.
Done so Far :
1. Created a webdynpro for java application using NWDI.
2. received the WSDL file of the PI interface and imported as "Adaptive webservice model" into webdynpro.
3. used the model and set the parameters to PI interface and executed the model.
4. I have created JCO destinations in the source system (where the application runs) to communicate to the PI system. A special user has been created and assigned in the connection for communicating.
5. Also I have created the "Dynamic Webseviceproxies" in visual admin with the same name as the JCO destinations. It had a property "URL" for which I have tested with providing both the PI server URL (Http://<Hostname>:<Port no>) and also the complete webservice URL (Which calls the WSDL file directly)
when I run the application, I get the following error.
1. Exception on creation of service metadata for WS metadata destination 'WD_RFC_METADATA_DEST' and WS interface '{<Interface Name>'. One possible reason is that the metadata destination 'WD_RFC_METADATA_DEST' has not been properly configured; check configuration.
after some exception the next error follows
2. Invalid Response Code 403 while accessing URL: <The URL which I have provided in the webservice proxy in Visual admin tool> Response Message: Forbidden.
after some lines of exception from PI server the next error follows.
3. Error: You are not authorized to view the requested resource
My Question :
1. Do I miss anything in Configuration?
2. Is my way of approach wrong?
3. Any additional authorization needed?
Kindly provide some ideas and inputs.
Regards,
Mahendran B.

Dear Mahendran
JCO destination will not used for the Web Service Model. While creating the webservice model, you need to use the logical destination which you have created in the Visual Admin.
Please refer to the Secured WebServices II and verify currently used webservice logical destination How To Reimport Web Service Models in Web Dynpro for Java
You can also refer to
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/900bbf94-a7a8-2910-e298-a651b4706c1e?QuickLink=index&overridelayout=true
Hope it will helps
Best Regards
Arun Jaiswal

Exception while exposing Application Module Methods as Web Service

Hello Everyone,
I am working on Jdeveloper 11.1.1.3.0 version and tried to expose one method of application module as web service. To do this, i used "Service Interface" tab of Application module within Jdeveloper and Jdeveloper had generated all interfaces, stubs, code for the Session bean required for web service. I am now trying to "Test Web Service" from the implementation class generated then i am getting this error in Weblogic deployment. Any help/pointers would be highly appreciated.
I used another installation of Jdeveloper same version at my collegues desktop but getting the same error. Not sure, if this version of Jdeveloper is having issue in exposing application module as web service. I think that database related exception can be ignored as no database call is being made by the application.
[Running application SalaryControlService on Server Instance IntegratedWebLogicServer...]
[10:41:26 AM] ---- Deployment started. ----
[10:41:26 AM] Target platform is (Weblogic 10.3).
[10:41:27 AM] Retrieving existing application information
[10:41:27 AM] Running dependency analysis...
[10:41:27 AM] Deploying 2 profiles...
[10:41:27 AM] Wrote EJB Module to C:\Documents and Settings\sacggupt\Application Data\JDeveloper\system11.1.1.3.37.56.60\o.j2ee\drs\SalaryControlService\ModelEJB.jar
[10:41:28 AM] Wrote Enterprise Application Module to C:\Documents and Settings\sacggupt\Application Data\JDeveloper\system11.1.1.3.37.56.60\o.j2ee\drs\SalaryControlService
[10:41:29 AM] java.lang.NullPointerException
[10:41:29 AM]      at oracle.j2ee.ws.tools.wsa.jaxws.AssemblerProcessor.getClassNamesFromEjb(AssemblerProcessor.java:180)
[10:41:29 AM]      at oracle.j2ee.ws.tools.wsa.jaxws.AssemblerProcessor.processEjb(AssemblerProcessor.java:149)
[10:41:29 AM]      at oracle.j2ee.ws.tools.wsa.jaxws.JaxwsEjbAssembler.processEjb(JaxwsEjbAssembler.java:182)
[10:41:29 AM]      at oracle.j2ee.ws.tools.wsa.jaxws.JaxwsEjbAssembler.ejbAssemble(JaxwsEjbAssembler.java:152)
[10:41:29 AM]      at oracle.j2ee.ws.tools.wsa.cli.Processor.jaxwsEjbAssemble(Processor.java:630)
[10:41:29 AM]      at oracle.j2ee.ws.tools.wsa.cli.Processor.execute(Processor.java:327)
[10:41:29 AM]      at oracle.j2ee.ws.tools.wsa.cli.Processor.execute(Processor.java:230)
[10:41:29 AM]      at oracle.j2ee.ws.tools.wsa.Main.mainNoSystemExit(Main.java:84)
[10:41:29 AM]      at oracle.j2ee.ws.tools.wsa.Main.main(Main.java:49)
[10:41:29 AM] WARNING: Error while processing ejb-jar.xml for ejb module at "C:\Documents and Settings\sacggupt\Application Data\JDeveloper\system11.1.1.3.37.56.60\o.j2ee\drs\SalaryControlService\ModelEJB.jar".
[10:41:29 AM] INFO: Unable to load annotation weblogic.javaee.CallByReference for parsing. The annotation is ignored.
[10:41:29 AM] INFO: Unable to load annotation weblogic.javaee.CallByReference for parsing. The annotation is ignored.
[10:41:29 AM] INFO: GenericWSWarAnnotationListener.parseAnnotatedClass Adding Servlet Mapping with URL pattern /HrModuleService for annotated WebService class lt.andrejusb.model.server.serviceinterface.HrModuleServiceImpl
[10:41:30 AM] WSA process exited with code 0
[10:41:30 AM] Deploying Application...
<Jan 3, 2011 10:41:31 AM IST> <Warning> <J2EE> <BEA-160195> <The application version lifecycle event listener oracle.security.jps.wls.listeners.JpsAppVersionLifecycleListener is ignored because the application SalaryControlService is not versioned.>
<ServerMessages><warningMBeanRegisterError> Failed to register the web service Config MBeans for application: SalaryControlService endpoint: SalaryControlService the error is: oracle.as.jmx.framework.util.MissingConfigurationFileException: The configuration at URI "WEB-INF\oracle-webservices.xml" cannot be loaded.
[10:41:36 AM] Application Deployed Successfully.
[10:41:36 AM] The following URL context root(s) were defined and can be used as a starting point to test your application:
[10:41:36 AM] http://10.176.162.16:7101/SalaryControlService
[10:41:36 AM] Elapsed time for deployment: 9 seconds
[10:41:36 AM] ---- Deployment finished. ----
Run startup time: 9391 ms.
[Application SalaryControlService deployed to Server Instance IntegratedWebLogicServer]
Target URL -- http://localhost:7101/SalaryControlService/HrModuleService
Edited by: LearningToFly on Jan 2, 2011 9:13 PM

Hello,
Is this resolved yet? The reason I am asking is that I'm getting the same error as yours. I am trying to run the StoreFront tutorial in JDeveloper 11.1.1.3 and here's what I got:
[04:21:31 PM] ---- Deployment started. ----
[04:21:31 PM] Target platform is (Weblogic 10.3).
[04:21:32 PM] Retrieving existing application information
[04:21:32 PM] Running dependency analysis...
[04:21:32 PM] Deploying 4 profiles...
[04:21:32 PM] Wrote MAR file to C:\Documents and Settings\ylin\Application Data\JDeveloper\system11.1.1.3.37.56.60\o.j2ee\drs\StoreFrontModule\metadata1.mar
[04:21:33 PM] Wrote Web Application Module to C:\Documents and Settings\ylin\Application Data\JDeveloper\system11.1.1.3.37.56.60\o.j2ee\drs\StoreFrontModule\StoreFrontUIWebApp.war
[04:21:38 PM] Wrote EJB Module to C:\Documents and Settings\ylin\Application Data\JDeveloper\system11.1.1.3.37.56.60\o.j2ee\drs\StoreFrontModule\StoreFrontServiceEJB.jar
[04:21:40 PM] Wrote Enterprise Application Module to C:\Documents and Settings\ylin\Application Data\JDeveloper\system11.1.1.3.37.56.60\o.j2ee\drs\StoreFrontModule
[04:21:41 PM] java.lang.NullPointerException
[04:21:41 PM]      at oracle.j2ee.ws.tools.wsa.jaxws.AssemblerProcessor.getClassNamesFromEjb(AssemblerProcessor.java:180)
[04:21:41 PM]      at oracle.j2ee.ws.tools.wsa.jaxws.AssemblerProcessor.processEjb(AssemblerProcessor.java:149)
[04:21:41 PM]      at oracle.j2ee.ws.tools.wsa.jaxws.JaxwsEjbAssembler.processEjb(JaxwsEjbAssembler.java:182)
[04:21:41 PM]      at oracle.j2ee.ws.tools.wsa.jaxws.JaxwsEjbAssembler.ejbAssemble(JaxwsEjbAssembler.java:152)
[04:21:41 PM]      at oracle.j2ee.ws.tools.wsa.cli.Processor.jaxwsEjbAssemble(Processor.java:630)
[04:21:41 PM]      at oracle.j2ee.ws.tools.wsa.cli.Processor.execute(Processor.java:327)
[04:21:41 PM]      at oracle.j2ee.ws.tools.wsa.cli.Processor.execute(Processor.java:230)
[04:21:41 PM]      at oracle.j2ee.ws.tools.wsa.Main.mainNoSystemExit(Main.java:84)
[04:21:41 PM]      at oracle.j2ee.ws.tools.wsa.Main.main(Main.java:49)
[04:21:41 PM] WARNING: Error while processing ejb-jar.xml for ejb module at "C:\Documents and Settings\ylin\Application Data\JDeveloper\system11.1.1.3.37.56.60\o.j2ee\drs\StoreFrontModule\StoreFrontServiceEJB.jar".
[04:21:41 PM] INFO: Unable to load annotation weblogic.javaee.CallByReference for parsing. The annotation is ignored.
[04:21:41 PM] INFO: Unable to load annotation javax.interceptor.Interceptors for parsing. The annotation is ignored.
[04:21:41 PM] INFO: Unable to load annotation weblogic.javaee.CallByReference for parsing. The annotation is ignored.
[04:21:41 PM] INFO: Unable to load annotation javax.interceptor.Interceptors for parsing. The annotation is ignored.
[04:21:41 PM] INFO: GenericWSWarAnnotationListener.parseAnnotatedClass Adding Servlet Mapping with URL pattern /StoreFron
Can someone help with this? Thank you in advance!
Edited by: 834077 on Mar 5, 2011 6:28 AM

Error While Consuming the webservice in ABAP

Hi,
I am trying to consume a webservice in ECC. I have imported the WSDL and generated the proxy. Did the configuration in the SOAMANAGER. While calling the webservice from the program I am getting the following error message. "SRT: Unsupported xstream found: ("HTTP Code 400 : Bad Request")"
Any help is appreciated.
Thanks
Raghavendra Kuamr

Hi,
Check ST11 to find detailed log of issue, most likely you are passing "WS-A" message id along with request (check settings in SOAMANAGER Logical Port).
Try calling service after suppressing "Message Id transfer". See SAP Note: 1361688 and related notes in 0001292171
Regards,
Gourav
PS: please search forum before posting questions.

While Consuming a WebService in JSP Dyn Page - There is an Error

Hi Friends,
I have a web service created in ASP.NET web Service.
And I have Consumed the Web Service using WSDL URL.
I need to write a code to refer that class in the JSP DynPage
I have created like this in DoIntialization
MyServiceName obj=(MyServiceName) PortalRuntime.getRuntimeResources().getService(MyServiceName.KEY);
int a = 10;
int b = 20;
obj.Add1(a,b);
but it shows an error
"The method Add1 Method(Add1 Method) is the type. MySErviceName is not Applicable for the arguements(int,int)"
Please Help me in this regard.
Thanks in Advance
Thanks & Regards,
Palani

Hi Andy,
I will let u know the sequence which i followed to consume the Webservice.
NWDS --> File --> New --> Project --> Portal Application --> Create New Portal App Project.
The Project is created.....
After that i want to consume the Webservice for the same project...
for that...
NWDS --> File --> New --> Other --> Portal Application --> Create New Portal Application Object --> Selecting My Project?(intended prjct) --> Portal Webservice --> Portal Service from WSDL file - Client Side --> My WSDL URL --> Selecting the methods which i need to expose from the Webservice --> I gave unique name for my 1) Service 2) Alias 3) Package....and that was done....(other way is to add from portalapp.xml ??)
After that i created a new JSPDyn page for my application in DoInitialization() method i tried to access the method from that webservice using the following code...
MyServiceName obj=(MyServiceName) PortalRuntime.getRuntimeResources().getService(MyServiceName.KEY);
I am successfully able to access the method from the webservice using the object which i have created but i am not able to pass arguments to that method...???
I tried consuming same webservice created in .NET in .NET itself and i am able to pass arguments successfully.
I tried to consume webservice created in ABAP in .NET and able to implement successfully...
but the same ABAP webservice when i tried to consume its not working with this NWDS.
Is there any thing else i need to follow while consuming a webservice in the EP Perspectice of NWDS ???
Deployable Proxy is required for that ?? if required how to create and use that ??
Thanks in Advance,
Palani

Error while deploying BPEL into Oracle SOA Suite

Hi All,
I am facing an issue while deploying my bpel project into Oracle SOA Suite. Please find the following error log
BUILD FAILED
D:\jdevstudio10135\jdev\mywork\FirstApplication\WelcomeProjct\build.xml:78: A problem occured while connecting to server "localhost" using port "8888": bpel_WelcomeProjct_1.0.jar failed to deploy. Exception message is: ORABPEL-05215
Error while loading process.
The process domain encountered the following errors while loading the process "WelcomeProjct" (revision "1.0"): null.
If you have installed a patch to the server, please check that the bpelcClasspath domain property includes the patch classes.
at com.collaxa.cube.engine.deployment.CubeProcessHolder.bind(CubeProcessHolder.java:285)
at com.collaxa.cube.engine.deployment.DeploymentManager.deployProcess(DeploymentManager.java:804)
at com.collaxa.cube.engine.deployment.DeploymentManager.deploySuitcase(DeploymentManager.java:670)
at com.collaxa.cube.ejb.impl.BPELDomainManagerBean.deploySuitcase(BPELDomainManagerBean.java:445)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:585)
at com.evermind.server.ejb.interceptor.joinpoint.EJBJoinPointImpl.invoke(EJBJoinPointImpl.java:35)
at com.evermind.server.ejb.interceptor.InvocationContextImpl.proceed(InvocationContextImpl.java:119)
at com.evermind.server.ejb.interceptor.system.DMSInterceptor.invoke(DMSInterceptor.java:52)
at com.evermind.server.ejb.interceptor.InvocationContextImpl.proceed(InvocationContextImpl.java:119)
at com.evermind.server.ejb.interceptor.system.JAASInterceptor$1.run(JAASInterceptor.java:31)
at com.evermind.server.ThreadState.runAs(ThreadState.java:620)
at com.evermind.server.ejb.interceptor.system.JAASInterceptor.invoke(JAASInterceptor.java:34)
at com.evermind.server.ejb.interceptor.InvocationContextImpl.proceed(InvocationContextImpl.java:119)
at com.evermind.server.ejb.interceptor.system.TxRequiredInterceptor.invoke(TxRequiredInterceptor.java:50)
at com.evermind.server.ejb.interceptor.InvocationContextImpl.proceed(InvocationContextImpl.java:119)
at com.evermind.server.ejb.interceptor.system.DMSInterceptor.invoke(DMSInterceptor.java:52)
at com.evermind.server.ejb.interceptor.InvocationContextImpl.proceed(InvocationContextImpl.java:119)
at com.evermind.server.ejb.InvocationContextPool.invoke(InvocationContextPool.java:55)
at com.evermind.server.ejb.StatelessSessionEJBObject.OC4J_invokeMethod(StatelessSessionEJBObject.java:87)
at DomainManagerBean_RemoteProxy_4bin6i8.deploySuitcase(Unknown Source)
at com.oracle.bpel.client.BPELDomainHandle.deploySuitcase(BPELDomainHandle.java:317)
at com.oracle.bpel.client.BPELDomainHandle.deployProcess(BPELDomainHandle.java:339)
at deployHttpClientProcess.jspService(_deployHttpClientProcess.java:376)
at com.orionserver.http.OrionHttpJspPage.service(OrionHttpJspPage.java:59)
at oracle.jsp.runtimev2.JspPageTable.service(JspPageTable.java:453)
at oracle.jsp.runtimev2.JspServlet.internalService(JspServlet.java:591)
at oracle.jsp.runtimev2.JspServlet.service(JspServlet.java:515)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:856)
at com.evermind.server.http.ResourceFilterChain.doFilter(ResourceFilterChain.java:64)
at oracle.security.jazn.oc4j.JAZNFilter$1.run(JAZNFilter.java:396)
at java.security.AccessController.doPrivileged(Native Method)
at javax.security.auth.Subject.doAsPrivileged(Subject.java:517)
at oracle.security.jazn.oc4j.JAZNFilter.doFilter(JAZNFilter.java:410)
at com.evermind.server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:621)
at com.evermind.server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:368)
at com.evermind.server.http.HttpRequestHandler.doProcessRequest(HttpRequestHandler.java:866)
at com.evermind.server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java:448)
at com.evermind.server.http.HttpRequestHandler.serveOneRequest(HttpRequestHandler.java:216)
at com.evermind.server.http.HttpRequestHandler.run(HttpRequestHandler.java:117)
at com.evermind.server.http.HttpRequestHandler.run(HttpRequestHandler.java:110)
at oracle.oc4j.network.ServerSocketReadHandler$SafeRunnable.run(ServerSocketReadHandler.java:260)
at oracle.oc4j.network.ServerSocketAcceptHandler.procClientSocket(ServerSocketAcceptHandler.java:239)
at oracle.oc4j.network.ServerSocketAcceptHandler.access$700(ServerSocketAcceptHandler.java:34)
at oracle.oc4j.network.ServerSocketAcceptHandler$AcceptHandlerHorse.run(ServerSocketAcceptHandler.java:880)
at com.evermind.util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor.java:303)
at java.lang.Thread.run(Thread.java:595)
Total time: 2 seconds
I am using JDevelpoer 10.1.3.5 and SOA Suite 10g. Please help me to figure it out.
Thanks

Make sure you use the similar version of soa suite and JDev 10135. If you are using JDev 10.1.3.5, your soa suite version should be 10.1.3.5. I was just wondering if you were ever able to deploy any other process successfully from the similar JDev and on similar SOA Suite ? If not you need to revisit your soa suite installation again.
Also check the log files on the server to see if any errors are recorded.

Issue while invoking a stored procedure in DB2 from Oracle OSB flow

oracle.tip.adapter.sa.api.JCABindingException: oracle.tip.adapter.sa.impl.fw.ext.org.collaxa.thirdparty.apache.wsif.WSIFException: servicebus:/WSDL/Test_Project/Application/Project1/TestSP [ TestSP_ptt::TestSP(InputParameters,OutputParameters) ] - WSIF JCA Execute of operation 'TestSP' failed due to: Stored procedure invocation error.
Error while trying to prepare and execute the NED.LOGIN_MODULE API.
An error occurred while preparing and executing the NED.LOGIN_MODULE API. Cause: java.lang.NullPointerException
; nested exception is:
BINDING.JCA-11811
Stored procedure invocation error.
Error while trying to prepare and execute the NED.LOGIN_MODULE API.
An error occurred while preparing and executing the NED.LOGIN_MODULE API. Cause: java.lang.NullPointerException
Check to ensure that the API is defined in the database and that the parameters match the signature of the API.

This forum is for issues about WebLogic Connector container itself. You may need to post your issue to other forums such as SOA.
Thanks

Issue while passing Target URL dynamically in SOAP Receiver Adapter

Experts,
I am stuck with an issue while passing the Target URL dynamically.
The UDF required for this works just fine. I can see the Target URL in Dynamic Configuration header(The Key is TServerLocation) in SXMB_MONI but the request that I am sending is not reaching the web service.
Some posts have suggested to hard code the Target URL as http://.
Below is the error that I am getting when I hard the Target URL as http://:
<SOAP:Envelope xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/">
   <SOAP:Body>
      <SOAP:Fault>
         <faultcode>SOAP:Server</faultcode>
         <faultstring>Server Error</faultstring>
         <detail>
            <s:SystemError xmlns:s="http://sap.com/xi/WebService/xi2.0">
               <context>XIAdapter</context>
               <code>RecoverableException</code>
               <text>com.sap.aii.af.ra.ms.api.DeliveryException: XIAdapterFramework:GENERAL:com.sap.aii.af.ra.ms.api.DeliveryException: invalid content type for SOAP: TEXT/HTML
     at com.sap.aii.adapter.xi.ms.XIEventHandler.onTransmit(XIEventHandler.java:453)
     at com.sap.aii.af.ra.ms.impl.core.queue.CallConsumer.onMessage(CallConsumer.java:131)
     at com.sap.aii.af.ra.ms.impl.core.queue.Queue.run(Queue.java:834)
     at com.sap.aii.af.ra.ms.runtime.MSWorkWrapper.run(MSWorkWrapper.java:56)
     at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
     at java.security.AccessController.doPrivileged(Native Method)
     at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:100)
     at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:170)</text>
            </s:SystemError>
         </detail>
      </SOAP:Fault>
   </SOAP:Body>
</SOAP:Envelope>
When I hard code the Target URL as Test (any dummy value), the error that I get is different. (Detailed error shown below)
<SOAP:Envelope xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/">
   <SOAP:Body>
      <SOAP:Fault>
         <faultcode>SOAP:Server</faultcode>
         <faultstring>Server Error</faultstring>
         <detail>
            <s:SystemError xmlns:s="http://sap.com/xi/WebService/xi2.0">
               <context>XIAdapter</context>
               <code>RecoverableException</code>
               <text>com.sap.aii.af.ra.ms.api.DeliveryException: XIAdapterFramework:GENERAL:com.sap.aii.af.ra.ms.api.DeliveryException: no scheme
     at com.sap.aii.adapter.xi.ms.XIEventHandler.onTransmit(XIEventHandler.java:453)
     at com.sap.aii.af.ra.ms.impl.core.queue.CallConsumer.onMessage(CallConsumer.java:131)
     at com.sap.aii.af.ra.ms.impl.core.queue.Queue.run(Queue.java:834)
     at com.sap.aii.af.ra.ms.runtime.MSWorkWrapper.run(MSWorkWrapper.java:56)
     at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
     at java.security.AccessController.doPrivileged(Native Method)
     at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:100)
     at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:170)</text>
            </s:SystemError>
         </detail>
      </SOAP:Fault>
   </SOAP:Body>
</SOAP:Envelope>
I've referred the post [Dynamic URL for SOAP receiver adapter;.
I am on PI 7.0.
Any help in this regard is highly appreciated.
Best Regards,
Vijay

Issue resolved... by doing this:
DynamicConfigurationKey key2 = DynamicConfigurationKey.create("http://sap.com/xi/XI/System/SOAP", "TAuthKey");
conf.put (key2, "username");
In the advanced tab of the communication channel, set the flag "View Authorization keys", and then added "username" (user to access the dynamic target url) and the password (2 times).
That's it...

Issue while Processing the Huge File in BPEL

Hi,
We are facing an Issue while Processing a Hige file in BPEL Process (More than 1MB File). When i test the files with more than 1500 transactions (More than 1MB file) then the BPEL Process is automatically goes to OFF Mode or it goes to Perform Manually Recovery Queue.
Even we are facing this issue in Production also so we are using UNIX Script to Split the file before place the file in BPEL Input directory.Any Pointers to resolve this issue will be helpful.
Thanks,
Saravana

Hi,
Please find the answers.
1. Currently we are using SOA 10.1.2 Version and JDev10g
2. we are using File Adapeter
3. yes. We used debatching.
4. Yes. I am able to recover from Manual Recovery Queue
5. Please find the error message
<2009-05-21 04:32:38,461> <DEBUG> <ESIBT.collaxa.cube.engine.dispatch> <Dispatcher::adjustThreadPool> Allocating 1 thread(s); pending threads: 1, active threads: 0, total: 83
<2009-05-21 04:32:44,077> <DEBUG> <ESIBT.collaxa.cube.activation> <File Adapter::Inbound> File : /harbinger/prod/xlate/Outbound_Input_LDS_810/Input5162009.B2B is ready to be processed.
<2009-05-21 04:32:44,077> <INFO> <ESIBT.collaxa.cube.activation> <File Adapter::Inbound> Processing file : /harbinger/prod/xlate/Outbound_Input_LDS_810/Input5162009.B2B
<2009-05-21 04:32:44,077> <DEBUG> <ESIBT.collaxa.cube.activation> <AdapterFramework::Inbound> onBatchBegin: Batch 'bpel://localhost/ESIBT/BPELProcess_810~1.0//Input5162009.B2B_1242894594000' (/harbinger/prod/xlate/Outbound_Input_LDS_810/Input5162009.B2B) starting...
<2009-05-21 04:32:44,077> <DEBUG> <ESIBT.collaxa.cube.translation> <TranslatorFactory::log> Inside TranslatorFactory
<2009-05-21 04:32:44,078> <DEBUG> <ESIBT.collaxa.cube.translation> <TranslatorFactory::log> using version attribute = NXSD
<2009-05-21 04:32:44,078> <DEBUG> <ESIBT.collaxa.cube.translation> <TranslatorFactory::log> loading xlator class...oracle.tip.pc.services.translation.xlators.nxsd.NXSDTranslatorImpl
<2009-05-21 04:32:44,081> <DEBUG> <ESIBT.collaxa.cube.translation> <TranslatorFactory::log> class loaded
<2009-05-21 04:32:44,081> <DEBUG> <ESIBT.collaxa.cube.activation> <File Adapter::Inbound> Created translator : oracle.tip.pc.services.translation.xlators.nxsd.NXSDTranslatorImpl@46908ae8
<2009-05-21 04:32:44,098> <DEBUG> <ESIBT.collaxa.cube.activation> <File Adapter::Inbound> Setting up Control dir for debatching error recovery
<2009-05-21 04:32:44,121> <DEBUG> <ESIBT.collaxa.cube.activation> <File Adapter::Inbound> Control dir for debatching error recovery : /opt01/app/ESIBT/oracle/esibt10gR2iAS/BPEL10gR2/iAS/j2ee/home/fileftp/controlFiles/localhost_ESIBT_BPELProcess_810~1.0_/inbound
<2009-05-21 04:32:44,121> <DEBUG> <ESIBT.collaxa.cube.activation> <File Adapter::Inbound> Invoking inbound translation for : Input5162009.B2B
<2009-05-21 04:32:44,121> <DEBUG> <ESIBT.collaxa.cube.translation> <NXSDTranslatorImpl::log> Starting translateFromNative
<2009-05-21 04:32:44,139> <DEBUG> <ESIBT.collaxa.cube.translation> <NXSDTranslatorImpl::log> Done with translateFromNative
<2009-05-21 04:32:44,139> <DEBUG> <ESIBT.collaxa.cube.activation> <File Adapter::Inbound> Completed inbound translation for : Input5162009.B2B
<2009-05-21 04:32:44,139> <DEBUG> <ESIBT.collaxa.cube.activation> <File Adapter::Inbound> isTextFile : true
<2009-05-21 04:32:44,139> <INFO> <ESIBT.collaxa.cube.activation> <File Adapter::Inbound> Translated inbound batch index 1 of file {Input5162009.B2B} with corrupted message count = 1
<2009-05-21 04:32:44,139> <DEBUG> <ESIBT.collaxa.cube.activation> <File Adapter::Inbound> Error Reader created using charset :ASCII
<2009-05-21 04:32:44,139> <INFO> <ESIBT.collaxa.cube.activation> <File Adapter::Inbound> Sending message to Adapter Framework for rejection to user-configured rejection handlers : {
fileName=/harbinger/prod/xlate/Outbound_Input_LDS_810/Input5162009.B2B, startLine=1, startColumn=1, endLine=-1, endCol=-1, Exception=ORABPEL-11167
Error while reading native data.
[Line=1, Col=70] Expected "\t" at the specified position in the native data, while trying to read the data for "element with name HDR_STORE_NUM", using "style" as "terminated" and "terminatedBy" as "\t", but not found.
Ensure that "\t", exists at the specified position in the native data.
<2009-05-21 04:32:44,139> <DEBUG> <ESIBT.collaxa.cube.activation> <File Adapter::Inbound> Setting batchId in NativeRecord to bpel://localhost/ESIBT/BPELProcess_810~1.0//Input5162009.B2B_1242894594000
<2009-05-21 04:32:44,139> <WARN> <ESIBT.collaxa.cube.activation> <AdapterFramework::Inbound> [Read_ptt::Read(Object)] - onReject: The resource adapter 'File Adapter' requested handling of a malformed inbound message. However, the following bpel.xml activation property has not been defined: 'rejectedMessageHandlers'. Please define it and redeploy the business process. Will use the default Rejection Directory file:///opt01/app/ESIBT/oracle/esibt10gR2iAS/BPEL10gR2/iAS/integration/orabpel/domains/ESIBT/archive/jca/BPELProcess_810/rejectedMessages for now.
<2009-05-21 04:32:44,140> <WARN> <ESIBT.collaxa.cube.activation> <AdapterFramework::Inbound> [Read_ptt::Read(Object)] - onReject: Sending invalid inbound message to Exception Handler:
<2009-05-21 04:32:44,140> <INFO> <ESIBT.collaxa.cube.activation> <AdapterFramework::Inbound> Handing rejected message to DEFAULT rejection handler: file:///opt01/app/ESIBT/oracle/esibt10gR2iAS/BPEL10gR2/iAS/integration/orabpel/domains/ESIBT/archive/jca/BPELProcess_810/rejectedMessages since none of the configured rejection handlers [] succeeded.
<2009-05-21 04:32:44,140> <DEBUG> <ESIBT.collaxa.cube.activation> <AdapterFramework::Inbound> Finished persisting rejected message to file system under the name: /opt01/app/ESIBT/oracle/esibt10gR2iAS/BPEL10gR2/iAS/integration/orabpel/domains/ESIBT/archive/jca/BPELProcess_810/rejectedMessages/INVALID_MSG_BPELProcess_810_Read_20090521_043244_0140.dat
<2009-05-21 04:32:44,141> <DEBUG> <ESIBT.collaxa.cube.activation> <File Adapter::Inbound> Setting last error record to : -1
<2009-05-21 04:32:44,141> <DEBUG> <ESIBT.collaxa.cube.activation> <File Adapter::Inbound> Translator has failed to translate any message from batch number: 1
<2009-05-21 04:32:44,141> <INFO> <ESIBT.collaxa.cube.activation> <File Adapter::Inbound> Message not published as translation failed: {
File=/harbinger/prod/xlate/Outbound_Input_LDS_810/Input5162009.B2B, batchIndex=1, PublishSize=1
<2009-05-21 04:32:44,141> <ERROR> <ESIBT.collaxa.cube.activation> <AdapterFramework::Inbound> onBatchFailure: Batch 'bpel://localhost/ESIBT/BPELProcess_810~1.0//Input5162009.B2B_1242894594000' (/harbinger/prod/xlate/Outbound_Input_LDS_810/Input5162009.B2B) has failed due to: ORABPEL-11167
Error while reading native data.
[Line=1, Col=70] Expected "\t" at the specified position in the native data, while trying to read the data for "element with name HDR_STORE_NUM", using "style" as "terminated" and "terminatedBy" as "\t", but not found.
Ensure that "\t", exists at the specified position in the native data.
<2009-05-21 04:32:44,141> <INFO> <ESIBT.collaxa.cube.activation> <File Adapter::Inbound> Deleting file : /harbinger/prod/xlate/Outbound_Input_LDS_810/Input5162009.B2B after processing.
<2009-05-21 04:32:44,141> <DEBUG> <ESIBT.collaxa.cube.activation> <File Adapter::Inbound> Deleting file : Input5162009.B2B
<2009-05-21 04:32:44,141> <DEBUG> <ESIBT.collaxa.cube.activation> <File Adapter::Inbound> Deleted file : true
<2009-05-21 04:32:44,141> <DEBUG> <ESIBT.collaxa.cube.activation> <File Adapter::Inbound> Removing file /harbinger/prod/xlate/Outbound_Input_LDS_810/Input5162009.B2B from files to be processed Map.
<2009-05-21 04:32:44,141> <INFO> <ESIBT.collaxa.cube.activation> <File Adapter::Inbound> Done processing File : /harbinger/prod/xlate/Outbound_Input_LDS_810/Input5162009.B2B
<2009-05-21 04:33:09,698> <DEBUG> <ESIBT.collaxa.cube.engine.data> <ConnectionFactory::getConnection> GOT CONNECTION 4 Autocommit = false
For this error message this shows due to some /t its not picking up the file. but even i am facing the same issue for all the files where load is huge.
Thanks,
Saravana

Issue while integrating OID and BPEL.

Issue while integrating OID and BPEL.
We followed steps mentioned in for integration. WE have two SoA instances, home, oc4j_soa.
http://download-uk.oracle.com/docs/cd/B31017_01/integrate.1013/b28982/service_config.htm#BABIBGFF
Before running configure_oid.bat script, we changed jazn.xml to include the contents that are available in home\jazn.xml.
The contents we replaced contain
<jazn xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:noNamespaceSchemaLocation="http://xmlns.oracle.com/oracleas/schema/jazn-10_0.xsd" schema-major-version="10" schema-minor-version="0" provider="LDAP" location="ldap://myhost:389" default-realm="my-realm" >
     <property name="custom.sso.url.login" value="/jsso/SSOLogin" />
     <property name="ldap.user" value="orclApplicationCommonName=jaznadmin2,cn=JAZNContext,cn=products,cn=OracleContext" />
     <property name="ldap.password" value="{903}dA0r1HydR5qIhjAn2OCLMSWlFXeLdV//sCLFNwSfWhE=" />
     <property name="custom.sso.key.alias" value="ssoSymmetricKey" />
     <property name="idm.token.asserter.class" value="oracle.security.jazn.sso.SSOCookieTokenAsserter" />
     <property name="idm.token.collector.class" value="oracle.security.jazn.sso.SSOCookieTokenCollector" />
     <property name="idm.token.type" value="HTTP_COOKIE" />
     <property name="idm.token.collector.cookie.1" value="ORA_OC4J_SSO" />
     <property name="custom.sso.url.logout" value="/jsso/SSOLogout" />
     <property name="ldap.protocol" value="no-ssl" />
     <property name="idm.authentication.name" value="JavaSSO" />
</jazn>
configure_oid.bat ran successfully.
But when we try restarting SoA, it gives error. If we replace the above to point to XML-based jazn then SoA starts succcessfully.
Please let us know if we are missing anything.
Regards
Yatan

*1.) No I am not able to complete 2.1.3.3 step 3 the*
work list application is showing "authentication fail"
user look up is showing "unable to find the realm with name my-realm "
*2.) After 2.1.3.3 step 2, if I try restarting the SOA suite, it throws following error.*------------------------------------------------------------------------------------------------------------------------------------------------------------
Configuration information
Running in C:\product\10.1.3.1\OracleAS_1
Operation mode:Startup, App Server, No Enterprise Manager, Single Instance
Oracle home:C:\product\10.1.3.1\OracleAS_1
Oracle home name:Unnamed
Instance name:ias_soa.myhost
Instance type:allProducts
Version:10.1.3.1.0
Uses infrastructure:false
Not an infrastructure instance, no infrastructure information available
Components:[j2ee, apache, orabpel, oraesb, owsm, Wsil]
2009-06-29 04:10:49.962--Begin log output for Mid-tier services (ias_soa.myhost)
2009-06-29 04:10:49.962--Processing Step: starting OPMN
2009-06-29 04:10:57.493--Processing Step: starting OPMN managed processes
2009-06-29 04:11:22.806--End log output for Mid-tier services (ias_soa.myhost)
An unknown OPMN error has occured
oracle.appserver.startupconsole.model.ConsoleException: An unknown OPMN error has occured
     at oracle.appserver.startupconsole.control.OPMNController.doStart(OPMNController.java:140)
     at oracle.appserver.startupconsole.control.Controller.start(Controller.java:69)
     at oracle.appserver.startupconsole.control.GroupController.doStart(GroupController.java:47)
     at oracle.appserver.startupconsole.control.Controller.start(Controller.java:69)
     at oracle.appserver.startupconsole.view.controller.ControllerAdapter.start(ControllerAdapter.java:30)
     at oracle.appserver.startupconsole.view.controller.MasterControlAdapter.run(MasterControlAdapter.java:94)
     at oracle.appserver.startupconsole.view.Runner.main(Runner.java:39)
Caused by: oracle.appserver.startupconsole.model.ConsoleException: There are some errors while stopping the following components. Refer to the generated error report for more details.
==================================================
ias-component: default_group
process-type: oc4j_soa
process-set: default_group
Error Message:failed to start a managed process after the maximum retry limit
==================================================
     at oracle.appserver.startupconsole.control.OPMNController.doStart(OPMNController.java:139)
     ... 6 more
Caused by: oracle.ias.opmn.optic.OpticControlException: Error from opmn during process control operation
     at oracle.ias.opmn.optic.AbstractOpmnEntity.runCommand(AbstractOpmnEntity.java:174)
     at oracle.ias.opmn.optic.AbstractOpmnEntity.start(AbstractOpmnEntity.java:110)
     at oracle.appserver.startupconsole.control.OPMNController.doStart(OPMNController.java:97)
     ... 6 more
Exception caused by
There are some errors while stopping the following components. Refer to the generated error report for more details.
==================================================
ias-component: default_group
process-type: oc4j_soa
process-set: default_group
Error Message:failed to start a managed process after the maximum retry limit
==================================================
oracle.appserver.startupconsole.model.ConsoleException: There are some errors while stopping the following components. Refer to the generated error report for more details.
==================================================
ias-component: default_group
process-type: oc4j_soa
process-set: default_group
Error Message:failed to start a managed process after the maximum retry limit
==================================================
     at oracle.appserver.startupconsole.control.OPMNController.doStart(OPMNController.java:139)
     at oracle.appserver.startupconsole.control.Controller.start(Controller.java:69)
     at oracle.appserver.startupconsole.control.GroupController.doStart(GroupController.java:47)
     at oracle.appserver.startupconsole.control.Controller.start(Controller.java:69)
     at oracle.appserver.startupconsole.view.controller.ControllerAdapter.start(ControllerAdapter.java:30)
     at oracle.appserver.startupconsole.view.controller.MasterControlAdapter.run(MasterControlAdapter.java:94)
     at oracle.appserver.startupconsole.view.Runner.main(Runner.java:39)
Caused by: oracle.ias.opmn.optic.OpticControlException: Error from opmn during process control operation
     at oracle.ias.opmn.optic.AbstractOpmnEntity.runCommand(AbstractOpmnEntity.java:174)
     at oracle.ias.opmn.optic.AbstractOpmnEntity.start(AbstractOpmnEntity.java:110)
     at oracle.appserver.startupconsole.control.OPMNController.doStart(OPMNController.java:97)
     ... 6 more
<?xml version='1.0' encoding='WINDOWS-1252'?>
<response>
<msg code="-82" text="Remote request with weak authentication.">
</msg>
<opmn id="bg1ws0008:6201" http-status="206" http-response="2 of 3 processes started.">
<ias-instance id="ias_soa.myhost">
<ias-component id="default_group">
<process-type id="home">
<process-set id="default_group">
<process id="91427687" pid="4148" status="Alive" index="1" log="C:\product\10.1.3.1\OracleAS_1\opmn\logs\\default_group~home~default_group~1.log" operation="request" result="success">
<msg code="0" text="">
</msg>
</process>
</process-set>
</process-type>
<process-type id="oc4j_soa">
<process-set id="default_group">
<process id="91427688" pid="5856" status="Init" index="1" log="C:\product\10.1.3.1\OracleAS_1\opmn\logs\\default_group~oc4j_soa~default_group~1.log" operation="request" result="failure">
<msg code="-21" text="failed to start a managed process after the maximum retry limit">
</msg>
</process>
</process-set>
</process-type>
</ias-component>
<ias-component id="HTTP_Server">
<process-type id="HTTP_Server">
<process-set id="HTTP_Server">
<process id="91427686" pid="5140" status="Alive" index="1" log="C:\product\10.1.3.1\OracleAS_1\opmn\logs\\HTTP_Server~1.log" operation="request" result="success">
<msg code="0" text="">
</msg>
</process>
</process-set>
</process-type>
</ias-component>
</ias-instance>
</opmn>
</response>
*3.) opmnctl status -all ?*
C:\product\10.1.3.1\OracleAS_1\opmn\bin>opmnctl status -all
Usage:
opmnctl [<scope>] status [<options>] [host port]
Notes:
- if host,port is specified, contact opmn on host,port;
otherwise, contact opmn in local ias instance.
scope:
@instance(:name)*|@cluster
scope specifies how far to apply the query. To apply the query to
all known iAS Instances, specify "cluster". To apply the query
to a specific set of 1 or more iAS Instances, specify
"instance(:instname(:instname...))". If no names are supplied
in an instance scope string then the request is applied to the
"local" instance. In this context, "local" means the instance
containing the opmn server handling the request.
Default: local iAS Instance.
Options:
[ias-component|oc4j-group]=id
- filter output by ias-component name
- i.e. filter output by oc4j-group name
-l - pre-selected long output format:
%cmp32%prt18%pid7R%sta8%uid10R%mem8R%utm9R%por
-fmt <fmtlist> - output format (see details below)
Option "-fmt <fmtlist>" and "-l" are mutually exclusive
-fsep <string> - field separator (default:" | ")
-rsep <string> - record separator (default:"\n")
-noheaders - don't print a header
-c <count> - number of times to print status (default:1)
-i <nsecs> - seconds between each print (default:5)
-app [-l] - application status (optional long format)
-port - opmn "request" host and port (scope
argument invalid)
Format String Syntax:
<fmtlist> - A single string containing one or more statistic
identifiers concatenated together where each identifier has
the following format: %<statname>[<width>[<justification>]]
default: %cmp32%prt18%pid7R%sta8
<statname> - Must be one of the following:
ins - iAS Instance Name
cmp - iAS Component Id
prt - Process Type Id
prs - Process Set Id
idx - Index of process in Process Set
pid - OS Process Identifier
uid - Opmn Unique Id
typ - Name for this kind of process
sta - Process status
stm - start time (ms)
utm - up time (ms)
cpu - cpu time (ms)
mem - memory used (Kb)
pme - private memory (Kb)
sme - shared memory (Kb)
hpz - heap size (Kb)
por - Port List
<width> - The number of columns to use for this field. Output
less than this value will receive padding according to the
specified justification. Output more than this value will
be truncated and terminated with '~'.
default: the width of each datum
<justification> - How to justify output when less than the width.
Must be L, R, or C (left, right, or center justification).
default: L
4.) SOA Suite version ? *10.1.3.1.0*
5.) Did you manually tweak some configuration file or followed the documentation as it is ? I have followed the document as it is.
I have changed only jazn.xml available in ..j2ee/oc4j_soa suite to have the below section: This section was copied from jazn.xml of ..j2ee/home directory that has been automatically updated after running configure_oid.bat file
<jazn xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:noNamespaceSchemaLocation="http://xmlns.oracle.com/oracleas/schema/jazn-10_0.xsd" schema-major-version="10" schema-minor-version="0" provider="LDAP" location="ldap://myhost:389" default-realm="myrealm" >
     <property name="custom.sso.url.login" value="/jsso/SSOLogin" />
     <property name="ldap.user" value="orclApplicationCommonName=jaznadmin2,cn=JAZNContext,cn=products,cn=OracleContext" />
     <property name="ldap.password" value="{903}dA0r1HydR5qIhjAn2OCLMSWlFXeLdV//sCLFNwSfWhE=" />
     <property name="custom.sso.key.alias" value="ssoSymmetricKey" />
     <property name="idm.token.asserter.class" value="oracle.security.jazn.sso.SSOCookieTokenAsserter" />
     <property name="idm.token.collector.class" value="oracle.security.jazn.sso.SSOCookieTokenCollector" />
     <property name="idm.token.type" value="HTTP_COOKIE" />
     <property name="idm.token.collector.cookie.1" value="ORA_OC4J_SSO" />
     <property name="custom.sso.url.logout" value="/jsso/SSOLogout" />
     <property name="ldap.protocol" value="no-ssl" />
     <property name="idm.authentication.name" value="JavaSSO" />
</jazn>
instead of
<jazn xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:noNamespaceSchemaLocation="http://xmlns.oracle.com/oracleas/schema/jazn-10_0.xsd" schema-major-version="10" schema-minor-version="0" provider="XML" location="./system-jazn-data.xml" default-realm="jazn.com">

     <property name="idm.authentication.name" value="JavaSSO"/>
     <property name="idm.token.asserter.class" value="oracle.security.jazn.sso.SSOCookieTokenAsserter"/>
     <property name="idm.token.collector.class" value="oracle.security.jazn.sso.SSOCookieTokenCollector"/>
     <property name="idm.token.type" value="HTTP_COOKIE"/>
     <property name="idm.token.collector.cookie.1" value="ORA_OC4J_SSO"/>

     <property name="custom.sso.url.login" value="/jsso/SSOLogin"/>
     <property name="custom.sso.url.logout" value="/jsso/SSOLogout"/>
     <property name="custom.sso.key.alias" value="ssoSymmetricKey"/>
</jazn>

Getting issue while log in to Essbase server

Hi All,
Am getting network issue while log in to Essbase sever in console :
Below is error :
Network error 10061 : Unable to connect server .the client timed out waiting to connect the essbase agent TCP/IP. Check your network connections Also make sure Server and port values are correct.
i have recycled all services and pinged from one server to another server every thing is working fine. but am getting above error.
Please help me out. Required all your suggestion and appreciated if anybody provides solution.
Thanks in advance
SM

Hi All,
Currently am on 11.1.2.1 version.
I have checked essbase .log file below is the error
[Mon Nov 04 22:07:11 2013]Local/ESSBASE0///Info(1056704)
Received OPMN Ping Request
[Mon Nov 04 22:07:11 2013]Local/ESSBASE0///Info(1056705)
Sent the Response to OPMN Ping
[Mon Nov 04 22:07:27 2013]Local/ESSBASE0///Info(1051001)
Received client request: MaxL: Execute (from user [msad://OBJECTGUID=\0f\cf\16\80\7d\4a\84\43\8c\3b\f4\d7\32\a9\2d\e0?USER])
[Mon Nov 04 22:07:27 2013]Local/ESSBASE0///Info(1008106)
Exception error log [E:\Oracle\Middleware\user_projects\epmsystem1\diagnostics\logs\essbase\essbase_0\log00022.xcp] is being created...
[Mon Nov 04 22:07:27 2013]Local/ESSBASE0///Info(1008107)
Exception error log completed E:\Oracle\Middleware\user_projects\epmsystem1\diagnostics\logs\essbase\essbase_0\log00022.xcp please contact technical support and provide them with this file
[Mon Nov 04 22:07:32 2013]Local/ESSBASE0///Info(1056704)
Received OPMN Ping Request
[Mon Nov 04 22:07:32 2013]Local/ESSBASE0///Info(1056705)
Sent the Response to OPMN Ping
[Mon Nov 04 22:07:37 2013]Local/ESSBASE0///Info(1054018)
RECEIVED ABNORMAL SHUTDOWN COMMAND - ESSBASE TERMINATING
i think essbase has been crashed please let me know your inputs and procedure further.
thanks in advance
SM

Exception occured while invoking the webservice operation

I have deployed a Webservice that consist of a DB Adapter that fetches data from Master and detail Tabels from DB. Now i insert this data to some other data base having same types of table there. The below problem is only come when i try to insert data from one DB to other but when i only show output of my webservice it works fine and shows the master and details data. Mater table have approx 38 rows while detail have approx 500 rows. Kindly help me to resolve this issue..
The selected operation process could not be invoked.
An exception occured while invoking the webservice operation. Please see logs for more details.
oracle.sysman.emSDK.webservices.wsdlapi.SoapTestException: Client received SOAP Fault from server : Transaction Rolledback.: weblogic.transaction.internal.TimedOutException: Transaction timed out after 300 seconds
BEA1-12097AA8772D3C8BB607
at weblogic.transaction.internal.ServerTransactionImpl.wakeUp(ServerTransactionImpl.java:1788)
at weblogic.transaction.internal.ServerTransactionManagerImpl.processTimedOutTransactions(ServerTransactionManagerImpl.java:1676)
at weblogic.transaction.internal.TransactionManagerImpl.wakeUp(TransactionManagerImpl.java:1988)
at weblogic.transaction.internal.ServerTransactionManagerImpl.wakeUp(ServerTransactionManagerImpl.java:1586)
at weblogic.transaction.internal.WLSTimer.timerExpired(WLSTimer.java:35)
at weblogic.timers.internal.TimerImpl.run(TimerImpl.java:273)
at weblogic.work.SelfTuningWorkManagerImpl$WorkAdapterImpl.run(SelfTuningWorkManagerImpl.java:545)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:256)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:221)
; nested exception is: weblogic.transaction.internal.TimedOutException: Transaction timed out after 300 seconds
BEA1-12097AA8772D3C8BB607
Thanks
Nasir

I have deployed a Webservice that consist of a DB Adapter that fetches data from Master and detail Tabels from DB. Now i insert this data to some other data base having same types of table there. The below problem is only come when i try to insert data from one DB to other but when i only show output of my webservice it works fine and shows the master and details data. Mater table have approx 38 rows while detail have approx 500 rows. Kindly help me to resolve this issue..
The selected operation process could not be invoked.
An exception occured while invoking the webservice operation. Please see logs for more details.
oracle.sysman.emSDK.webservices.wsdlapi.SoapTestException: Client received SOAP Fault from server : Transaction Rolledback.: weblogic.transaction.internal.TimedOutException: Transaction timed out after 300 seconds
BEA1-12097AA8772D3C8BB607
at weblogic.transaction.internal.ServerTransactionImpl.wakeUp(ServerTransactionImpl.java:1788)
at weblogic.transaction.internal.ServerTransactionManagerImpl.processTimedOutTransactions(ServerTransactionManagerImpl.java:1676)
at weblogic.transaction.internal.TransactionManagerImpl.wakeUp(TransactionManagerImpl.java:1988)
at weblogic.transaction.internal.ServerTransactionManagerImpl.wakeUp(ServerTransactionManagerImpl.java:1586)
at weblogic.transaction.internal.WLSTimer.timerExpired(WLSTimer.java:35)
at weblogic.timers.internal.TimerImpl.run(TimerImpl.java:273)
at weblogic.work.SelfTuningWorkManagerImpl$WorkAdapterImpl.run(SelfTuningWorkManagerImpl.java:545)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:256)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:221)
; nested exception is: weblogic.transaction.internal.TimedOutException: Transaction timed out after 300 seconds
BEA1-12097AA8772D3C8BB607
Thanks
Nasir

Technical Issue while Exposing WebCenter webservices to SOA

Similar Messages

Maybe you are looking for