My number keys stopped working, help

I tried toggling number lock and that did nothing, any ideas please

PPC means Power PC, this was the type of micro processor Apple used prior to switching to Intel in 2006. Please update your profile, the way it's set now is it's confusing to those trying to help you.
On the SMC reset, please follow the instructions VERY carefully. Also it can take 2-3x for a SMC reset to take. Other things to try are resetting the PRAM:
PRAM RESET
Shut down the computer.
Locate the following keys on the keyboard: Command, Option, P, and R. You will need to hold these keys down simultaneously in step 4.
Turn on the computer.
Press and hold the Command-Option-P-R keys. You must press this key combination before the gray screen appears.
Hold the keys down until the computer restarts and you hear the startup sound for the second time.
Release the keys.
Also restarting in Safe Mode can help, this clears some caches. It's possible one has become corrupt.

Similar Messages

Number keys stopped working

The number keys on my keyboard stopped working. Both on the number keypad and the numbers across the top. This was sudden. They worked and then the next second, they didn't. And yes, I have checked the num lock key . Just the numbers are effected, no other keys. What's up with that?

PPC means Power PC, this was the type of micro processor Apple used prior to switching to Intel in 2006. Please update your profile, the way it's set now is it's confusing to those trying to help you.
On the SMC reset, please follow the instructions VERY carefully. Also it can take 2-3x for a SMC reset to take. Other things to try are resetting the PRAM:
PRAM RESET
Shut down the computer.
Locate the following keys on the keyboard: Command, Option, P, and R. You will need to hold these keys down simultaneously in step 4.
Turn on the computer.
Press and hold the Command-Option-P-R keys. You must press this key combination before the gray screen appears.
Hold the keys down until the computer restarts and you hear the startup sound for the second time.
Release the keys.
Also restarting in Safe Mode can help, this clears some caches. It's possible one has become corrupt.

Keys stopped working; HELP!!

So over the last day my delete key, return key, right hand shift key and right arrow key all quit working. Restart computer, checked for software updates, I think its a hardware issue. Can't see anything obvious underthe keys and they seem to move like they should. They just dont do anything. Any Ideas????

PPC means Power PC, this was the type of micro processor Apple used prior to switching to Intel in 2006. Please update your profile, the way it's set now is it's confusing to those trying to help you.
On the SMC reset, please follow the instructions VERY carefully. Also it can take 2-3x for a SMC reset to take. Other things to try are resetting the PRAM:
PRAM RESET
Shut down the computer.
Locate the following keys on the keyboard: Command, Option, P, and R. You will need to hold these keys down simultaneously in step 4.
Turn on the computer.
Press and hold the Command-Option-P-R keys. You must press this key combination before the gray screen appears.
Hold the keys down until the computer restarts and you hear the startup sound for the second time.
Release the keys.
Also restarting in Safe Mode can help, this clears some caches. It's possible one has become corrupt.

Hello! I just figured this out.....When Firefox is open, my Illustrator CS2 modifier keys stop working? As soon as I shut down Firefox, they start working again. Please help! Thanks!

Hello!
I just figured this out.....When Firefox is open, my Illustrator CS2 modifier keys stop working?
As soon as I shut down Firefox, they start working again. Please help!
Thanks!
== This happened ==
Every time Firefox opened
== Not sure.

Try to create a new profile as a test to check if your current profile is causing the problem.
See "Creating a profile":
*https://support.mozilla.org/kb/profile-manager-create-and-remove-firefox-profiles
*http://kb.mozillazine.org/Standard_diagnostic_-_Firefox#Profile_issues
If the new profile works then you can transfer files from a previously used profile to the new profile, but be cautious not to copy corrupted files to avoid carrying over problems.
*http://kb.mozillazine.org/Transferring_data_to_a_new_profile_-_Firefox

My "9-o-l-." keys stop working after startup, and spreading! ahh help?

My "9-O-L-." keys stop working after startup and my arrow keys too.
Sometimes when I start up the keys will work for a bit then one by one stop functioning and then randomly work every so often, then it seems to "spread" to the right shift key, and sometimes the "8-I-K-," keys.
Around the same time when this all began my Battery completely stopped working too, does this have anything to do with it? I've reset my PRAM and no luck.
I'm planning on replacing the keyboard, will that fix the problem? or is it something deeper?
Thanks in advance!
-Andrew

I assume you've rebooted? Can you control the computer well enough to make a new account and log into it? Doubt this will fix it but maybe. The keyboard may need replacing but it might also be that the cable has worked loose so that some of the wires have disconnected but not all. Sounds like a trip or call to Apple is in order.

Satellite A105 Shift Keys stop working after BIOS update

I have a stack of laptop boards from the A105 series (Intel chipset) that I received with bad BIOS's. Two worked, and I updated the BIOS's on them to fix CPU compatibility issues. After that, the shift keys stopped working, and pressing Shift-A causes the power light to dim. Reverting to ANY previous version BIOS, whether through the Windows program, CD, or Crisis Recovery floppy (magic key is "F", not "B", "Esc", or "U"), does not fix the keyboard problem.
To make things more confusing, I did notice that the one single BIOS that seems to actually correct the problem is version 1.50, which I haven't seen available for any Tecra A7 or Satellite A100/A105, except a couple A100's, but the BIOS file is much too small and can't be loaded.
Does anyone have any idea why these Intel-based boards are doing this? Or does anyone know where I can get a usable version 1.50 BIOS?
For the sake of this post, please consider my skill level to be high. (In other words, I would be thankful for people trying to help with "Replace the keyboard", but I have about a dozen keyboards, all of which I have tried, and all of which work on other laptops. Additionally, if you have just a theoretical solution, I'm definitely open to hearing it. Also, if a Toshiba tech would like to reply, I would very much appreciate it!)

Hi, thank you for your help.
Some motherboards were not in chassis when I got them. Is there a place the PSAAxx model number would be written on the boards?
Four PSAA8U (Two A105-S4334 and Two A105-S4014) - Intel Chipset, fingerprint reader. Tried BIOS Versions 1.40, 1.70, 2.00, 5.10, 5.60, 5.90, and 6.00. Shift keys do not work on either one.
Two PSAA2U (A105-S2091 and A105-S2031) - ATi Chipset. BIOS versions 1.50, 1.80, and 2.30. Keyboard works.
Another PSAA8U (A105-S4184) - Intel Chipset, no fingerprint reader. BIOS version 6.00. Keyboard works.
I noticed that so far all of the models with fingerprint readers have the problem. All of the ATi Chipset boards are working fine, but they have significant processor limits. I am in the middle of updating the BIOS in another Intel one using a Crisis Rescue Disc, so after that finishes I will try disconnecting the fingerprint reader to see if it has an effect.
I don't think the keyboard controller is faulty, because these boards all failed on the same day. I have tried updating the BIOS using WinPhlash, Phlash16 in DOS, the install CD, and a Crisis Recovery Disk. I set the defaults in the BIOS almost every time, and I also have tried holding the power button for 60 seconds with the power cord unplugged and the battery removed (as some people have suggested.)
The shift keys don't work in DOS, Linux, Windows, or even in the BIOS. I test it in the BIOS by using Tab to cycle through the fields in time of day, then Shift-Tab to cycle backwards. This works with a USB keyboard, and it also works on the ATi chipset models and the Intel chipset models that are still working.
Thank you for your reply. (-:

Backslash key stopped working

My backslash key stopped working a couple of weeks ago. Until I get it fixxed, is there a way to remap some other key to this character, as least for using vim in Terminal.app?
Thanks. I feel that I should know how to do this, but I haven't the foggiest notion of where to start.
Mark T

Hi Yepix,
Boot the system into safe mode and check for the issue, also check in onscreen keyboard if it works. If still the same issue it might be issue with the keyboard hence suggest you to visit the nearest authorised service centre.
Click here to open a link where you can select the country and get the exact contact support number. I’m sure they will be a great help.
Best regards,
Ashwin. S

I can edit on Premiere Pro 6 files, but after a dozen keystrokes, the space bar and cursor keys stop working while the save function works

I can edit on Premiere Pro 6 files, but after a dozen keystrokes, the space bar and cursor keys stop working while the save function, render workspace function, export file are still operational. How can I fix it so I may complete my assignment?
Besides DaVinci Resolve, Adobe Creative Suite 6 is the only software on the machine. I am using Windows 7 Professional 64-bit Operating System on AMD FX 6100 six-Core Processor at 3.31gHz and 32 GB RAM memory. There are two SLI-bridged GTX680 NVidia cards.
The software was very stable for the last six months, working with 720P proxy files from 2.5K masters (Blackmagic Design Camera). I am working on a feature-length project that exceeds 1000 edits. I have broken the file into 2 one hour segments.
I have deactivated the software before reinstalling the entire OS from scratch. PP6 was very stable for 48 hours. Then the freezing space bar returns. After a dozen strokes into the project, same problem. I have made cache files store next to originals, I have deleted preview files if they were corrupted and causing instability. Am I missing something?
I have Microsoft Security Essentials for virus protection. I double checked the memory for damage/defect. Nothing says that the motherboard or other components are damaged.
I am in film competition overseas and need to have deliverables in less than a month's time. I lost the last two weeks troubleshooting and this crisis came at an inopportune moment of the project.
Any assistance would be greatly appreciated.

Still getting software freezes but found a way to mitigate for the mean time.
Upon launching Adobe Premiere Pro, hit CTRL-ALT-DEL to launch TaskManager as well.
You will want to highlight Adobe QT32 Server.exe
Right click and select "End Process Tree"
You will get considerable stability in the program, long enough to get timing of cuts done. Be sure to save often.
If the program freezes, do not hit Save. You definitely want to avoid saving the corruption into your TimeLine
CTRL-ALT-DEL to relaunch the TaskManager and highlight Adobe Premiere Pro.exe
Right-click to "End Process"
No need to reboot the whole system; just launch Premiere Pro again and continue with the session. Note that your work reverted to Last Save.
Hope this helps until the bug is fixed.

Brightness keys stopped working; won't restart or shut down

A couple days ago my brightness and volume keys stopped working. I thought restarting my computer (i also needed to restart it to install a software update) would fix this problem but then realized my Mac won't go to sleep, restart, or shut down. Any ideas on what I should do? Thanks for the help!

Sounds like you'll have to, then...
"Try Disk Utility
1. Insert the Tiger Mac OS X Install disc, then restart the computer while holding the C key.
2. When your computer finishes starting up from the disc, choose Disk Utility from the Installer menu. (In Mac OS X 10.4 or later, you must select your language first.)
Important: Do not click Continue in the first screen of the Installer. If you do, you must restart from the disc again to access Disk Utility.
3. Click the First Aid tab.
4. Select your Mac OS X volume.
5. Click Repair. Disk Utility checks and repairs the disk."
http://docs.info.apple.com/article.html?artnum=106214
Then Safe Boot , (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, reboot when it finishes.
(If perchance you cant Find your Install Disk, at least do the Safe Boot part above).

How can I drop the key board from my calendar. The normal lower right key stopped working

How can I drop the key board from my calendar? The normal lower right key stopped working.

You can install this extension to make it easier to edit userChrome.css:
* ChromEdit Plus: http://webdesigns.ms11.net/chromeditp.html
The file needs to have this code:
<pre><nowiki>@namespace url("http://www.mozilla.org/keymaster/gatekeeper/there.is.only.xul"); /* only needed once */
#personal-bookmarks #bookmarks-menu-button { display:none !important; }</nowiki></pre>
You can reach the profile folder this way:
*Help > Troubleshooting Information > Profile Directory: Open Containing Folder
The file userChrome.css needs to be in the chrome folder in the [http://kb.mozillazine.org/Profile_folder_-_Firefox Firefox Profile Folder], so if the chrome folder is missing then you need to create a folder with the name chrome.

Some keys stopped working for one user account

Dear all,
since a while (I can't say since when exactly) some of the keys stopped working: left control, left shift, and the tab key. In the beginning the caps lock didn't work as well, but it was my own setting. All other then the three listed work OK. As described in some KB articles I checked all settings for universal access, localisation, keyboard, mouse, and keyboard-shortcuts (all standard). I completely disassembled the keyboard (aprox. 50 screws!) cleaned it and checked the connections between the keys on the printed circuit. Everything looks good. Then my wife told me that she does not have the problem and indeed, in other user accounts it is all working OK. It means that it should be a setup problem in my profile. The keyboard viewer is showing every activated (pressed) key, but not the three that are not working - which is only consequent. When I disable the caps-lock then the keyboard viewer doesn't show this key being pressed either. My conclusion is that there must be a keyboard filter below the application level. Now I'm stuck.
Help appreciated!
Cheers,
Kurt.
Message was edited by: killtheclock

Yup, odds were against me choosing the right item on the first go
Log back into your problem account.
Here's the whole litany for thoroughly checking your home folder. It's not as daunting as it looks.
1. Go to Users/yourname//Library/Fonts - drag this folder to the desktop.
• Restart and test your applications.
• If they work start adding the fonts back few at a time.
( Likely suspects are Times RO, Helvetica Fractions and Times Phonetic, also if you do not use Classic you can trash the classic fonts.) If not, put your Fonts folder back.
2. Check Preferences Thoroughly;
• Go to ~(YourHome/Library/Preferences drag this folder to the desktop.
• Restart and test your applications.
• If this works, save the old preferences folder somewhere else or on disk, name it "old prefs" .
** Note: A very important file is the "com.apple.Mail.plist" preference file located in the Preferences folder which contains all email account settings and general mail preferences (hold this one and replace if your problem is not with Mail).
You'll have to go through some of your System Preferences and apps to set the preferences back to how you like them. (Or if you have the time and inclination, "cherry pick" through until you find the problem one or two.)
3. Check Permissions Inside Home Folder
• Navigate to YourHome/Library.
• Get Info (Command - i) on folders for apps you are having problems with.
• Open the "Ownership & permissions" disclosure triangle.
• Make sure you are the owner, with "read and write" access.
• Click on "apply to all"
• If this is correct, open the "Applications Support" folder and do the same procedure (Command+I) for the folders with the names of the applications you are having trouble with.
(Note:The reason to check this is because repairing permissions with Disk Utility doesn't touch permissions inside your home folder.)
4. Navigate to YourHome/Library/Caches and drag this folder to the trash, then log out and back or restart. There is no need to replace this folder.
-mj

Satellite L500-13W - FN Key Stop Working

Hello Everyone
I have a problem, suddenly, without doing anything, my *FN keys stop working*. First the luminosity adjustment still worked without appearing the bar on the top of the screen, but when I reboot the computer not even that works, nothing related with the FN key works.
My biggest problem is that my computer is a Toshiba Satellite L500-13W and *i can only activate Wireless pressing FN+F8*. I can't stay with this problem much more. I already looked in this forum and in other sites but none of the solutions have solved my problem.
I hope you can help me.
Thanks in Advance.
(Sorry for my bad English) :|
Oh I forgot to say, I am using Windows Vista 32 bit

Hi
> I don't understand why so many people have this problem
I cant imagine that many people have this problem. To be honest I have two notebooks, Satellite A300 and Qosmio F50. On both notebooks I installed Windows 7 and after installing VAP and Flash Cards support utility the FN keys worked fine. Also on Vista I never had a problem, all is working fine.
Anyway, I think you have tried everything so the last chance is reinstalling Vista using Toshiba recovery disk. After this the FN keys should work again.
Check this!!!

Arrow keys stop working?

I've seen multiple posts recently about arrow keys stop working. This just happend to me however i found the solution.
Hold down all four (4) arrow keys and a menu will pop up.
Then select charcters by clicking (i believe) the right arrow.
Hope this helps.

Hi Ken,
Thanks for posting in MSDN forum.
Since the issue is more relate to the end-user, I'd like to move it to Excel IT pro forum.
The reason why we recommend posting appropriately is you will get the most qualified pool of respondents, and other partners who read the forums regularly can either share their knowledge or learn from your interaction with us.
Thanks for your understanding.
Regards & Fei
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Launchpad key stop working?

The launchpad key stop working on my macbook pro 2011 and i have tryed every thing and the only thing that work if i push the fn button and F4 so i just want the launchpad key to work again with out the fn key please if some body could help me..........

Hi.
Re. " The command does not delete any of your specific keyboard shortcuts you have defined. "
Umm, sure it does. This unix command deletes the preferences file that tracks all of the keyboard changes that you make.
So, write down (snapshot) any/all functions so that you can re-assign them.
-Alan
Ps: The only exception to this are any "Application Shortcuts" hot keys.

Keys stopped working

Just got a brand new replacement curve and after two days all the keys stopped working. You can hear the phone ring but can't answer it. When it goes black you have to plug it in even to see the screen but then all the keys still don't work.

It sounds like what I have seen multiple times on a device with moisture damage.
Even sitting on a bathroom counter during a hot steamy shower or bath can cause keyboard and trackball problems UNTIL properly dried out.
It really is more common than you think.
1. Remove the battery immediately!! Do not attempt to turn on your BlackBerry.
2. Let the device dry in a warm, dry place for 3 to 5 days* (see below)
3. DO NOT "check it each day" by placing the battery in. Leave it be to dry completely. This takes time. Replacing the battery to check it can only damage it more (moisture + electrical current = disaster).
3. If the device is warm after the drying period, allow it to cool to room temperature before placing the battery back in.
*Suggestions on drying your BlackBerry in a warm place (open, with the battery out):
Place the BB in a container of dry UNcooked rice, and then you might also place it in any of the locations mentioned below.
On top of any dry heat emitting electronic component: TV cabinet or CRT, LCD, cable TV/Satellite converter box or plasma monitor
On the dashboard of your car on a sunny day
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

My number keys stopped working, help

Similar Messages

Maybe you are looking for