Techniques for accessing CLUSTER tables

Can some 1 plz tell me , How many standard methods are there to access a cluster table. I want to know each and every method with example.1 method is Logical databases , 2nd is thrugh se16. But I want to know each and every.
My cluster tables are
1) ZNO_CT1 having fields (mandt , roll_no , Name)
2) ZNO_CT2 having fields (mandt , roll_no , Age)
AND these are  assigned to the table cluster  'ZNO_CLUST'.
ZNO_CLUST has (mandt , roll_no , pageno , timestamp , VARDATA)

Hi,
You can find the methods below.
Just go thru this link-
http://dev.mysql.com/doc/ndbapi/en/class-table.html
Thanks
Do reward points if useful

Similar Messages

  • Maintaince view creation for a cluster table

    Hi friends,
    I have created a maintaince view for a cluster table bseg and i have activated it its working fine..
    now my problem is i can create maintaince view for mutiple tables if other tables are linked with primary table using foriegn key relationship..
    Now can any one tell me is it possible to create maintance view for cluster table with multiple tables as i need a linked table with bseg which iam not able to get... ie : when i click on the relationship tab iam not getting the linked tables for bseg...
    now can i create a maintaince view with 2 linked cluster tables..
    if so can any one tell me how to create it.
    As sap says we can create projection view for cluster and pooled table and we cannot create database view for cluster and pooled tables , but it does not mentioned like that for maintaince view....
    I assume we can do it.... as iam trying to create a maintaince view with single cluster table then it shoudl allow me to create for multiple linked cluster tables.... and is it mandatory to maintain TMG for this maintaince view....?
    Regards
    KUMAR

    yes.. ur right inserting values into a cluster table other than standard sap tarnactions is dangerious....
    But sap didnot mentioned any where that we cannot maintain data for cluster tables using maintaince view... which it said for database view..that pooled and cluster table cannot be used for database view..
    Regards
    Kumar

  • Can we create secondary index for a cluster table

    hi
    can we create secondary index for a cluster table

    Jyothsna,
    There seems to be some kind of misunderstanding here. You <i>cannot</i> create a secondary index on a cluster table. A cluster table does not exist as a separate physical table in the database; it is part of a "physical cluster". In the case of BSEG for instance, the physical cluster is RFBLG. The only fields of the cluster table that also exist as fields of the physical cluster are the leading fields of the primary key. Taking again BSEG as the example, the primary key includes the fields MANDT, BUKRS, BELNR, GJAHR, BUZEI. If you look at the structure of the RFBLG table, you will see that it has primary key fields MANDT, BUKRS, BELNR, GJAHR, PAGENO. The first four fields are those that all cluster tables inside BSEG have in common. The fifth field, PAGENO, is a "technical" field giving the sequence number of the current record in the series of cluster records sharing the same primary key.
    All the "functional" fields of the cluster table (for BSEG this is field BUZEI and everything beyond that) exist only inside a raw binary object. The database does not know about these fields, it only sees the raw object (the field VARDATA of the physical cluster). Since the field does not exist in the database, it is impossible to create a secondary index on it. If you try to create a secondary index on a cluster table in transaction SE11, you will therefore rightly get the error "Index maintenance only possible for transparent tables".
    Theoretically you could get around this by converting the cluster table to a transparent table. You can do this in the SAP dictionary. However, in practice this is almost never a good solution. The table becomes much larger (clusters are compressed) and you lose the advantage that related records are stored close to each other (the main reason for having cluster tables in the first place). Apart from the performance and disk space hit, converting a big cluster table like BSEG to transparent would take extremely long.
    In cases where "indexing" of fields of a cluster table is worthwhile, SAP has constructed "indexing tables" around the cluster. For example, around BSEG there are transparent tables like BSIS, BSAS, etc. Other clusters normally do not have this, but that simply means there is no reason for having it. I have worked with the SAP dictionary for over 12 years and I have never met a single case where it was necessary to convert a cluster to transparent.
    If you try to select on specific values of a non-transparent field in a cluster without also specifying selections for the primary key, then the database will have to do a serial read of the whole physical cluster (and the ABAP DB interface will have to decompress every single record to extract the fields). The performance of that is monstrous -- maybe that was the reason of your question. However, the solution then is (in the case of BSEG) to query via one of the index tables (where you are free to create secondary indexes since those tables are transparent).
    Hope this clarifies things,
    Mark

  • ITAB_NON_NUMERIC_COMPONENT" in the "generation of scrambling programs for non-cluster tables

    Dear Experts,
    We have are experiencing issues in standalone scrambling,
    we are getting error" ITAB_NON_NUMERIC_COMPONENT" in the "generation of
    scrambling programs for non-cluster tables"
    Please help with the needful
    urgently.
    Thanks

    Hello,
    Implement the following SAP note in the execution system and re-execute the     
    activity 'Generation of scrambling programs for non-cluster tables' to solve this issue.
    SAP NOTE : '1915906 - SAP LT V2 SP06: Dump during program generation'
    Regards,
    Jerrin Francis

  • Special authorization need for read cluster table??

    In one report, I use following coding to read information from RFDT table:
    form get_f110_parm .
      f110id-laufd   = p_laufd.
      f110id-laufi   = p_laufi.
      f110versionpar = space.
      clear:   buktab, fkttab, slktab, sldtab, trctab, usrtab,
               faetab, jobtab, f110v, f110c,  trcopt, f110versionpar.
      import buktab fkttab slktab sldtab trctab usrtab
             faetab jobtab f110c trcopt f110versionpar
             from database rfdt(fb) id f110id
             accepting padding.
    endform.                    " GET_F110_PARM
    I can fill F110c, trcopt and f110versionpar by this program. But there is no entry in table like fkttab, usrtab.
    Is there any authorization need for read cluster table??
    Thanks in advance.
    Edited by: Amy Xie on Dec 21, 2010 10:41 AM

    Hello,
    After you run your code, check transaction SU53 to see if any authorization check failed.

  • SAP Connector accessing Cluster Tables

    We are using OWB 10gR2 to extract data from SAP. We have no problems extracting 'normal' tables from SAP, but the problem we face is that when we try to extract what is known as Cluster Tables in SAP, the OWB generated ABAP code causes problems to the SAP application when run.
    Has anyone come across this? Can you extract Cluster Tables from SAP using the SAP Connector?
    For info. we are using SAP Connector R/3 version 4.7.
    Thanks in advance !

    May you give me a help!
    You have done what i m trying to do from 10 days...
    working the sap connector..
    What is the module function in sap you invoke from the Connector?
    The version of librfc32.dll you used is the recommended version and build?
    Thanks & Greetings
    Roberto from Rome

  • Performance Tuning for A016 (cluster table) Query

    Dear SDNers,
    Issue:
    The report runs  successfully sometimes and sometimes the report gets timed out.
    My findings
    Query which is taking a  long time to execute is the query on A016(cluster Table) to fetch the condition details
    SELECT kschl
             evrtn
             evrtp
             knumh
             FROM a016 INTO TABLE t_a016
             FOR ALL ENTRIES IN t_ekpo
             WHERE
             kappl EQ c_m (Application)
             AND kschl IN s_kschl
             AND evrtn = t_ekpo-ebeln
             AND evrtp = t_ekpo-ebelp.
    where t_ekpo contains entries (4354)from ekko and ekpo based on the selection screen entries.
    I see that a016 is a cluster table that is being used here and t_a016 contains (390*) records after the above fetch.
    Dear readers,Please help me as to what has to be taken care of inorder to fine tune this select query?
    what are the things that i need to make corrections in.
    How can i make this fetch effective and faster?
    Please help me with your inputs.
    Regards,
    SuryaD.
    Edited by: SuryaD on Oct 26, 2009 6:29 PM

    Hi,
    1) Try to hit the table A016 with only unique entries of t_ekpo for EBELN and EBELP...
    Use some temp table lt_ekpo = t_ekpo
    i.e. sort lt_ekpo by ebeln ebelp
    delete adjacent duplicates from lt_ekpo comparing ebeln ebelp.
    Now write you select query as below...So that the table might be hit with less number of entries...
    SELECT kschl
    evrtn
    evrtp
    knumh
    FROM a016 INTO TABLE t_a016
    FOR ALL ENTRIES IN lt_ekpo
    WHERE
    kappl EQ c_m (Application)
    AND kschl IN s_kschl
    AND evrtn = lt_ekpo-ebeln
    AND evrtp = lt_ekpo-ebelp.
    Please note that there will be no change in the output data if you hit with duplicate entries/unique as FOR ALL ENTRIES will fetch only unique entries matching the where condition.
    2) Order of where conditon fields should be same as the order in table for better performance...
    3) If you find any index on the table, try to include the fields in where condition(if possible) for better performance
    Hope this helps
    Regards
    Shiva

  • Standalone Program for Accessing MDM Table

    Hi,
      I am trying access to MDM table using standalone java program but it is giving error. Is it possible?
    If it is possible means tell me the steps or post sample codes.
    Thanks in advance
    Regards
    Suresh

    Hello:
    I have a piece of code here, even tough I believe it would be easier if you could explain a little more about your problem.
    First I create properties for connection. I'm using strings however this can be done also setting properties directly:
    String server = "MDMServer";
    int port  = 2005;
    String user = "admin";
    String password = "thePassword";
    String language = "Spanish [MX]"; // languaje and local you want to use
    // THen you choose the region and attempt to login. Please note that even tough I choose region US, I log as a MX user, as provided by the language property
    CatalogData mdmBridge = new CatalogData();     
    mdmBridge.SetCodeRegion("English [US]");          mdmBridge.Login(server,port,user,password,language);
    // also note that the catalogData object is the main entrance, now create an array for MDMTables:
    CMTableInfoArray tables = null;
    // and attempt to get them:
    AttributeInfoArray fields = mdmBridge.GetLinkedAttributesForTaxonomy("Categories",6,false);
    System.out.println("Counts: " + fields.GetCount());
    // Traverse:
    for (int i = 0; i < fields.GetCount(); i++)
         AttributeInfo att = fields.GetAttributeInfoAt(i);
         System.out.println("NAME: " + att.GetName());
    // In this case I'm getting a taxonomy table, such as "Categories". However you could use any other type of tables. Finally I get the contents of this table:
    // Attempt to get the categories               A2iStringArray array = new A2iStringArray();
                   array.Add("Filter");
    ResultSetDefinition rsd = new ResultSetDefinition("Categories");
    rsd.AddField("Id");
    A2iResultSet rs = mdmBridge.GetRecordsByValue(array,rsd,"Id");               
    for(int i = 0; i < rs.GetRecordCount(); i++)               {
       Value v = rs.GetValueAt(i,0);
       System.out.println(v.GetStringValue());
    Please review the MDM API for java for further info.
    I hope that helps
    Alejandro

  • Problem for Accessing the Table BDCP..CDPOS..CDHDR..

    Hi Guys,
    i have the problem of accessing the BDCP table.it is working fine in development and testing server.it is taking more time in background in Production server..can anyone help me to optimize this code and please suggest me if i can change anyof the below logic..
    Thanks a lot in advance.
    LOOP AT t_cdobjid.
        objectid-low  = t_cdobjid-cdobjid.
        objectid-sign = 'I'.
        objectid-option = 'EQ' .
        APPEND objectid.
        CLEAR  objectid.
        count = count + 1.
        IF count = 50.
          CLEAR count.
          SELECT * FROM bdcp APPENDING TABLE t_bdcp
          WHERE cretime IN r_cretime AND
                tabname = 'DMEAN' AND
                fldname = 'KEY' AND
          cdobjid IN objectid.
          CLEAR : objectid.
          REFRESH: objectid.
        ENDIF.
      ENDLOOP.
      IF NOT objectid[] IS INITIAL.
        SELECT * FROM bdcp APPENDING TABLE t_bdcp
          WHERE cretime IN r_cretime AND
                tabname = 'DMEAN' AND
                fldname = 'KEY' AND
        cdobjid IN objectid.
        CLEAR : objectid.
        REFRESH: objectid.
      ENDIF.
      IF NOT t_bdcp[] IS INITIAL.
        t_bdcp_val[] = t_bdcp[].
        DESCRIBE TABLE t_bdcp_val LINES l_lines.
        l_max = 50.
        l_mod = l_lines MOD l_max.
        IF l_mod > 0.
          l_loopcount = ( l_lines DIV l_max ) + 1.
        ELSE .
          l_loopcount = l_lines DIV l_max.
        ENDIF.
        DO l_loopcount TIMES.
          CLEAR t_bdcp_emt.
          REFRESH t_bdcp_emt.
          IF sy-index = l_loopcount.
            t_bdcp_emt[] = t_bdcp_val[].
          ELSE.
            APPEND LINES OF t_bdcp_val FROM 1 TO l_max TO t_bdcp_emt.
            DELETE t_bdcp_val FROM 1 TO l_max.
          ENDIF.
          SELECT * FROM cdpos APPENDING TABLE t_cdpos_upc
              FOR ALL ENTRIES IN t_bdcp_emt
                       WHERE
                       objectclas = 'MATERIAL' AND
                       objectid   = t_bdcp_emt-cdobjid AND
                       changenr   = t_bdcp_emt-cdchgno  AND
                       tabname IN ('DMEAN', 'MARA' ) AND
                       fname   IN ('KEY', 'EAN11' ) .
        ENDDO.
        CLEAR   : l_lines ,
                  l_mod ,
                  l_loopcount.
           IF sy-subrc EQ 0.
        IF NOT t_cdpos_upc[] IS INITIAL.
          t_cdpos_del[] = t_cdpos_upc[] .
          DELETE t_cdpos_del WHERE tabname EQ 'MARA' .
          SORT t_cdpos_del BY changenr .
          LOOP AT t_cdpos_upc .
            READ TABLE t_cdpos_del WITH KEY
                       changenr = t_cdpos_upc-changenr
                       BINARY SEARCH .
            IF sy-subrc EQ 0  AND
              t_cdpos_upc-chngind = 'U' .
              DELETE t_cdpos_upc WHERE changenr = t_cdpos_upc-changenr
                                  AND  chngind  = 'D' .
            ENDIF.
            t_upc_matnr-matnr = t_cdpos_upc-objectid .
            APPEND t_upc_matnr .
          ENDLOOP.
          SORT t_upc_matnr BY matnr .
          DELETE ADJACENT DUPLICATES FROM t_upc_matnr COMPARING matnr .
          IF NOT t_cdpos_upc[] IS INITIAL.
            t_cdpos_upc_val[] = t_cdpos_upc[].
            DESCRIBE TABLE t_cdpos_upc_val LINES l_lines.
            l_max = 50.
            l_mod = l_lines MOD l_max.
            IF l_mod > 0.
              l_loopcount = ( l_lines DIV l_max ) + 1.
            ELSE .
              l_loopcount = l_lines DIV l_max.
            ENDIF.
            DO l_loopcount TIMES.
              CLEAR t_cdpos_upc_emt.
              REFRESH t_cdpos_upc_emt.
              IF sy-index = l_loopcount.
                t_cdpos_upc_emt[] = t_cdpos_upc_val[].
              ELSE.
                APPEND LINES OF t_cdpos_upc_val FROM 1 TO l_max TO
                                                    t_cdpos_upc_emt.
                DELETE t_cdpos_upc_val FROM 1 TO l_max.
              ENDIF.
              SELECT * FROM cdhdr APPENDING TABLE it_cdhdr_upc
                               FOR ALL ENTRIES IN t_cdpos_upc_emt
                                WHERE objectclas EQ 'MATERIAL'
                               AND   objectid  = t_cdpos_upc_emt-objectid
                               AND   changenr  = t_cdpos_upc_emt-changenr.
            ENDDO.
          ENDIF.
    Prabhu

    Use the PACKAGE SIZE oprion of the SELECT statement:
    LOOP AT t_cdobjid.
      objectid-low = t_cdobjid-cdobjid.
      objectid-sign = 'I'.
      objectid-option = 'EQ' .
      APPEND objectid.
      CLEAR objectid.
    ENDLOOP.
    SELECT * FROM bdcp APPENDING TABLE t_bdcp
      PACKAGE SIZE 5000
      WHERE cretime IN r_cretim AND
            tabname = 'DMEAN'   AND
            fldname = 'KEY'     AND
            cdobjid IN objectid.
    ENDSELECT.
    IF NOT objectid[] IS INITIAL.

  • How many SECONDARY INDEXES are created for CLUSTER TABLES?

    how many SECONDARY INDEXES are created for CLUSTER TABLES?
    please explain.

    There seems to be some kind of misunderstanding here. You cannot create a secondary index on a cluster table. A cluster table does not exist as a separate physical table in the database; it is part of a "physical cluster". In the case of BSEG for instance, the physical cluster is RFBLG. The only fields of the cluster table that also exist as fields of the physical cluster are the leading fields of the primary key. Taking again BSEG as the example, the primary key includes the fields MANDT, BUKRS, BELNR, GJAHR, BUZEI. If you look at the structure of the RFBLG table, you will see that it has primary key fields MANDT, BUKRS, BELNR, GJAHR, PAGENO. The first four fields are those that all cluster tables inside BSEG have in common. The fifth field, PAGENO, is a "technical" field giving the sequence number of the current record in the series of cluster records sharing the same primary key.
    All the "functional" fields of the cluster table (for BSEG this is field BUZEI and everything beyond that) exist only inside a raw binary object. The database does not know about these fields, it only sees the raw object (the field VARDATA of the physical cluster). Since the field does not exist in the database, it is impossible to create a secondary index on it. If you try to create a secondary index on a cluster table in transaction SE11, you will therefore rightly get the error "Index maintenance only possible for transparent tables".
    Theoretically you could get around this by converting the cluster table to a transparent table. You can do this in the SAP dictionary. However, in practice this is almost never a good solution. The table becomes much larger (clusters are compressed) and you lose the advantage that related records are stored close to each other (the main reason for having cluster tables in the first place). Apart from the performance and disk space hit, converting a big cluster table like BSEG to transparent would take extremely long.
    In cases where "indexing" of fields of a cluster table is worthwhile, SAP has constructed "indexing tables" around the cluster. For example, around BSEG there are transparent tables like BSIS, BSAS, etc. Other clusters normally do not have this, but that simply means there is no reason for having it. I have worked with the SAP dictionary for over 12 years and I have never met a single case where it was necessary to convert a cluster to transparent.
    If you try to select on specific values of a non-transparent field in a cluster without also specifying selections for the primary key, then the database will have to do a serial read of the whole physical cluster (and the ABAP DB interface will have to decompress every single record to extract the fields). The performance of that is monstrous -- maybe that was the reason of your question. However, the solution then is (in the case of BSEG) to query via one of the index tables (where you are free to create secondary indexes since those tables are transparent).

  • Doubt in Cluster table

    Hi Experts,
    Can You plz tell How to import/read data from cluster table? Plz give me the syntaxes also..
    Thanx in advance.

    use  read statement i don't think in cluster table there is any restruction for read  and select u can  use  open sql but  not  join in cluster table .
    Database table defined in the ABAP Dictionary, whose version on the database is not only assigned to one table defined in the ABAP Dictionary. Several cluster tables are assigned to a table cluster in the database. The intersection of the key fields of the cluster tables forms the primary key of the table cluster. The other columns of the cluster tables are stored in compressed form in a single column VARDATA of the table cluster. <b>You can access cluster tables only via Open SQL, and only without using joins.</b>

  • How to read cluster tables

    Hi ,
    I have a requirement  to read cluster tables data using import statement . I have to access cluster tables data based on selection criteria . Any body help me regarding this isuue .
    Regards
    Uday

    Hi Uday,
    Check this one:
    [Extraction from cluster tables through function module|https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/a0f46157-e1c4-2910-27aa-e3f4a9c8df33]
    Re: BW extractor for ERP cluster tables
    Regards,
    Chandra Sekhar

  • Dump DBIF_RSQL_INVALID_REQUEST on cluster tables

    Hi!
    I am having a brand new fresh SAP installation which produces a dump DBIF_RSQL_INVALID_REQUEST on any attempt to access any cluster table such as BSEG or DOKTL. The note 128617 "DBIF_RSQL_INVALID_REQUEST w/accessing cluster table" describes a very similar symptom, except that I don't have syslog and developer tracefile entries as described in the note. It suggests setting the profile parameter RSDB/RCLU/CACHELIMIT to 0 to deactivate the size restrictions for cluster records. Although the profile maintenance trans. (RZ10) warned me that there's no such parameter name (I don't know how to create one), I created it, activated the profile and restarted the SAP.
    However, nothing changed. I am desperate and have no ideas. Please help!
    Thanks in advance!
    Kind regards,
    Igor Barbaric,
    TMC Capgemini

    Hi Igor,
    What is you system & version of the installation? Are you not able to see any error from developer trace? Please first try reviewing note 520658 to see if solve the problem. Also make sure that there are no problems with network, and the used IP adresses are unique.   
    Thanks,
    George

  • Pool table & Cluster table

    Dear all,
    could you please help me out from the below.
    How to create pooled tables & cluster tables.
    When i am trying to create a table, by default it is showing table category as Transparent table.
    Regards
    Venkat

    hi,
    A pool table has many to one relation with the table in the database. For one table in the database there are many tables in the dictionary. Tha table in the database has a diff name than in the table in the data dict, it has diff no of fields and field names are different. A pooled table is stored in the pool at the database level. A table pool is a databse table with a special struct that enables the data of many R3 tables to be stored in it. It can hold only pooled tables
    Cluster table are logical tables that must be assigned to a table cluster when they are defined.
    Cluster table can be used to store control data they can also used to store temporary data or text such as documentation
    Pool table
    A database table defined in the ABAP Dictionary whose database instance is assigned to more than one table defined in the ABAP Dictionary. Multiple pool tables are assigned to a table pool in the database. The key fields of a pool table have to be character-type fields. The table pool's primary key consists of two fields: TABNAME for the name of a pool table, and VARKEY for the interdependent contents of the key fields in the corresponding pool table. The non-key fields of the pool table are stored in compressed format in their own column, called VARDATA, of the table pool. The only way to access pool tables is by using Open SQL. Joins are not allowed.
    Table Pool
    Database table in the database that contains the data of several pool tables.
    Cluster Table
    Database table defined in the ABAP Dictionary, whose version on the database is not only assigned to one table defined in the ABAP Dictionary. Several cluster tables are assigned to a table cluster in the database. The intersection of the key fields of the cluster tables forms the primary key of the table cluster. The other columns of the cluster tables are stored in compressed form in a single column VARDATA of the table cluster. You can access cluster tables only via Open SQL, and only without using joins.
    Table Cluster
    Database table in the database that contains the data of several cluster tables.
    Note: Never mix up with a database table that has the necessary structure for storing data clusters in database tables and in the shared memory. Those are called INDX-type, with reference to the database table INDX supplied by SAP. Data clusters are groupings of data objects for transient and persistent storage in a selectable storage medium. A data cluster can be processed using the statements IMPORT, EXPORT, and DELETE FROM
    Some pooled tables:
    T000 Clients
    T000C Table for Installing FI-SL Customizing
    T000CM Client-specific FI-AR-CR settings
    T000F Cross-Client FI Settings
    T000G Cross-Client FI-SL Postings
    T000GL Flexible general ledger: Customizing check
    T000K Group
    T000MD MRP at MRP Area Level
    T001 Company Codes
    T001_ARCH Archive contents short description
    T001_CONV Company codes affected by currency convers
    T001A Additional Local Currencies Control for Co
    T001B Permitted Posting Periods
    T001C Valid Posting Periods for Global Companies
    T001CM Permitted Credit Control Areas per Company
    T001D Validation of Accounting Documents
    T001E Company Code-Dependent Address Data
    T001F Company code-dependent form selection
    T001G Company Code-Dependent Standard Texts
    T001I Company Code - Parameter Types
    T001J Company Code - Parameter Type Names
    T001K Valuation area
    T001L Storage Locations
    T001M Data on Z5A Foreign Trade Regulations Repo
    T001N Company Code - EC Tax Numbers / Notificati
    A physical table definition is created in the database for the table definition stored
    in the ABAP Dictionary for transparent tables when the table is activated.
    The table definition is translated from the ABAP Dictionary to a definition of the particular database.
    On the other hand, <b>pooled tables and cluster tables are not created in the database.</b>The data of these tables is stored in the corresponding table pool or table cluster.
    It is not necessary to create indexes and technical settings for pooled and cluster tables.
    regards,
    pritha

  • What are Cluster Tables?

    What are Cluster Tables?

    Hi Sai,
    Cluster Table also appears like Transparent table but consists of huge data, so consumes more time to fetch the records from it.
    You can't join it with other tables to fetch the data.(BSEG in FI, KONV table for pricing are clusters)
    in HR all PCL1, PCL2, 3 are clusters of similar type.
    Creating a cluster table.
    http://help.sap.com/saphelp_erp2005/helpdata/en/cf/21f0b7446011d189700000e8322d00/frameset.htm
    Following is the step by step procedure.
    http://help.sap.com/saphelp_nw04/helpdata/en/cf/21f0b7446011d189700000e8322d00/content.htm
    To access cluster table:
    http://fuller.mit.edu/hr/cluster_tables.html
    http://help.sap.com/saphelp_nw04/helpdata/en/cf/21f083446011d189700000e8322d00/content.htm
    Cluster, pool and transparent tables
    Re: Pool and Cluster Tables
    Re: cluster table
    Regards,
    Padmam.

Maybe you are looking for