How to read cluster tables
Hi ,
I have a requirement to read cluster tables data using import statement . I have to access cluster tables data based on selection criteria . Any body help me regarding this isuue .
Regards
Uday
Hi Uday,
Check this one:
[Extraction from cluster tables through function module|https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/a0f46157-e1c4-2910-27aa-e3f4a9c8df33]
Re: BW extractor for ERP cluster tables
Regards,
Chandra Sekhar
Similar Messages
-
How to read Cluster Tables.
Sample program
Import and export to database is used in two programs and not in the same program.
ZPROGRAM1.
tables : indx.
Data : SALDO type i,
indxkey LIKE indx-srtfd VALUE 'ZAB1'.
indx-aedat = sy-datum.
indx-usera = sy-uname.
indx-pgmid = sy-repid.
EXPORT SALDO TO DATABASE indx(zc) ID indxkey.
In another program,
ZPROGRAM2.
tables : indx.
Data : SALDO type i,
indxkey LIKE indx-srtfd VALUE 'ZAB1'.
indx-aedat = sy-datum.
indx-usera = sy-uname.
indx-pgmid = sy-repid.
IMPORT SALDO FROM DATABASE indx(zc) ID indxkey. -
Error reading cluster table COIX for report 13BUD1A
Hi All,
We have issue when display report 13BUD1A using t.code CJE0 in ECC6 system. The error message appear as per below:-
Error reading cluster table COIX for report 13BUD1A (ID=13BUD1A KP 01RPSCO_X 0)
Message no. KH050
Diagnosis
The report structure for report 13BUD1A is stored in the cluster table COIX. An error occurred while the system was reading this data (ID = 13BUD1A KP 01RPSCO_X 0).
Table TKEB1 (Report List) contains administration information for report 13BUD1A. Consequently, table TKEB1 has an entry for the report, but table COIX does not.
The error may have resulted following a transport -- COIX has not yet been transported to the current client but TKEB1 is already there.
Procedure
If it is a transport problem, see if you can execute report 13BUD1A in client 000. If so, import it to the current client again.
If it is not a transport problem, delete report 13BUD1A from Tables TKEB1 and TKEB2.
Need you advice, how can we solve this error.
Thank You.Dear AP,
Thanks for your reply. FYI, we dont have access to client 000. And how to resolve this issue without access client 000? -
How to read a table from one host to other host
Hi Everybody,
How to read a table from one host to other host.
For Example,
a/a@abcd - host 1
b/b@xyz - host 2
suppose im having a table called emp in a/a@abcd
i want to read the table emp in b/b@xyz
how to do this.??
I know that we have to create a dblink...after that how to proceed.
Plz help..
Thanks in Advance,
Gitaconnected as scott/tiger@test
SQL>
CREATE DATABASE LINK local
CONNECT TO admin IDENTIFIED BY pinnet
USING 'pinnet';
Database link created.
sql>
select count(*) from
users@local;
COUNT(*)
16
Message was edited by:
jeneesh -
Special authorization need for read cluster table??
In one report, I use following coding to read information from RFDT table:
form get_f110_parm .
f110id-laufd = p_laufd.
f110id-laufi = p_laufi.
f110versionpar = space.
clear: buktab, fkttab, slktab, sldtab, trctab, usrtab,
faetab, jobtab, f110v, f110c, trcopt, f110versionpar.
import buktab fkttab slktab sldtab trctab usrtab
faetab jobtab f110c trcopt f110versionpar
from database rfdt(fb) id f110id
accepting padding.
endform. " GET_F110_PARM
I can fill F110c, trcopt and f110versionpar by this program. But there is no entry in table like fkttab, usrtab.
Is there any authorization need for read cluster table??
Thanks in advance.
Edited by: Amy Xie on Dec 21, 2010 10:41 AMHello,
After you run your code, check transaction SU53 to see if any authorization check failed. -
Hi
this is fazil.
Please tell me any body how to create cluster table.
Thanks & Regards
Fazil
[email protected]Hi,
1. In the initial screen of the ABAP Dictionary select object type Table, enter a table name and choose Create.
The field maintenance screen for the table is displayed. Table type Transparent table is set as default.
2. Make the necessary entries in the Short description and Delivery class fields on the Attributes tab page. Then define the fields of the table.
Proceed as when creating a transparent table. Save your entries.
3. Choose Extras ® Change table category.
A dialog box appears in which you have to select the table type Pooled table or Cluster table.
4. Choose Select.
You return to the field maintenance screen for the table. Field Pool/cluster name is displayed on the Attributes tab page in addition to the standard fields.
5. Enter the name of the table pool or table cluster to which you want to assign the pooled table or cluster table in field Pool/cluster name
Note that the total key length of a pooled table may not exceed the key length of the associated table pool. The key of a cluster table must correspond to the key of the associated table cluster.
6. Proceed as when creating a transparent table (see Creating Tables). Remember that you cannot create indexes for pooled or cluster tables.
All the attributes of the technical settings can be maintained for pooled tables and cluster tables. Before you can access these attributes, however, you must convert the table to a transparent table.
Rgds,
P.Naganjana Reddy -
Just want to know though BSEG is a cluster table but we can read it using Select or use SQL statements meant for transparent table. How is it possible?
Kindly clarify.
Regards
anyaHi,
there a 2 types of 'cluster' tables. The first one is a physical cluster, linking of tables sort of speak. Here you can use select statements as already described in the above answers.
see .<a href="http://help.sap.com/saphelp_47x200/helpdata/en/81/415d363640933fe10000009b38f839/frameset.htm">http://help.sap.com/saphelp_47x200/helpdata/en/81/415d363640933fe10000009b38f839/frameset.htm</a>
Another type of cluster table is the one with a fixed structure. This can be used to store data dynamically with the export statement you speak of eg. you can store an intire internal table this way or a deep structure and later on extract it again.
<a href="http://help.sap.com/saphelp_47x200/helpdata/en/fc/eb3c1f358411d1829f0000e829fbfe/frameset.htm">http://help.sap.com/saphelp_47x200/helpdata/en/fc/eb3c1f358411d1829f0000e829fbfe/frameset.htm</a> -
How to join cluster table?
How to join the cluster table with the transparent table?In specific ,can you pls tell me how can i join bkpf and bseg?
Hi Aravind,
Check this code,
tables : bkpf,
bseg.
INTERNAL TABLE AND WORK AREA FOR THE FIELDS IN BKPF TABLE *
data : begin of itab_bkpf occurs 0,
bukrs like bkpf-bukrs, "Company Code.
gjahr like bkpf-gjahr, "Fiscal Year.
budat like bkpf-budat, "Posting Date in the Document.
belnr like bkpf-belnr, "Accounting document number.
blart like bkpf-blart, "Document Type.
end of itab_bkpf.
data : wa_bkpf like line of itab_bkpf.
INTERNAL TABLE AND WORK AREA FOR THE FIEDLS IN BSEG TABLE *
data : begin of itab_bseg_debit occurs 0,
bukrs like bseg-bukrs, "Company Code.
gjahr like bseg-gjahr, "Fiscal Year.
belnr like bseg-belnr, "Accounting Document Number.
buzei like bseg-buzei, "Line Item.
hkont like bseg-hkont, "General Leadger Account.
shkzg like bseg-shkzg, "Credit/Debit Indicator.
wrbtr like bseg-wrbtr, "Amount in Document Currency.
pswsl like bseg-pswsl, "Update Currency for Gen.Ledger
dmbtr like bseg-dmbtr, "Amount in local currency.
sgtxt like bseg-sgtxt, "Item Text.
zuonr like bseg-zuonr, "Assignment Number.
end of itab_bseg_debit.
data : itab_bseg_credit like standard table of itab_bseg_debit with
header line.
FINAL OUTPUT INTERNAL TABLE *
data : begin of itab_output occurs 0,
belnr(08) ,
bukrs(04) ,
budat like bkpf-budat,
buzei(03) ,
hkont(07) ,
blart(02) ,
shkzg(01) ,
wrbtr(08) ,
pswsl(05) ,
dmbtr(10) ,
sgtxt(19) ,
zuonr(10) ,
end of itab_output.
constants : c_debit type c value 'S',
c_credit type c value 'H'.
SELECT-OPTIONS *
selection-screen begin of block input with frame title text-t01.
select-options : s_bukrs for bkpf-bukrs.
parameters : p_year like bkpf-gjahr visible length 2.
select-options : s_budat for bkpf-budat,
s_dbacct for bseg-hkont,
s_cracct for bseg-hkont,
s_amt for bseg-dmbtr.
selection-screen end of block input.
SELECTING RECORDS FROM BKPF TABLE BASED ON THE CONDITION *
select bukrs gjahr budat belnr blart
from bkpf into table itab_bkpf
where bukrs in s_bukrs and
gjahr eq p_year and
budat in s_budat.
SELECTING DEBIT LINE ITEMITEMS FROM BSEG FOR THE DOCUMENT *
NUMBER SELECTED FROM BKPF *
if not itab_bkpf[] is initial.
select bukrs gjahr belnr buzei
hkont shkzg wrbtr pswsl
dmbtr sgtxt zuonr
from bseg into table itab_bseg_debit
for all entries in itab_bkpf
where bukrs eq itab_bkpf-bukrs and
belnr eq itab_bkpf-belnr and
gjahr eq itab_bkpf-gjahr and
hkont in s_dbacct and
shkzg eq c_debit and
dmbtr in s_amt.
SELECTING CREDIT LINE ITEMITEMS FROM BSEG FOR THE DOCUMENT *
NUMBER SELECTED FROM BKPF *
select bukrs gjahr belnr buzei
hkont shkzg wrbtr pswsl
dmbtr sgtxt zuonr
from bseg into table itab_bseg_credit
for all entries in itab_bkpf
where bukrs eq itab_bkpf-bukrs and
belnr eq itab_bkpf-belnr and
gjahr eq itab_bkpf-gjahr and
hkont in s_cracct and
shkzg eq c_credit and
dmbtr in s_amt.
endif.
sort itab_bkpf by bukrs gjahr belnr.
sort itab_bseg_credit by bukrs gjahr belnr.
LOOPING THE DEBIT ENTRIES *
loop at itab_bseg_debit.
READING THE CREDIT ENTRIES WHICH MATCHES WITH HE CURRENT DOC. NUMBER *
read table itab_bseg_credit with key
bukrs = itab_bseg_debit-bukrs
gjahr = itab_bseg_debit-gjahr
belnr = itab_bseg_debit-belnr binary search.
if sy-subrc eq 0.
*READING THE POSTING DATE AND DOCUMENT TYPE FOR THE CURRENT DOUCMENT *
AND APPENDING THE DEBIT AND CREDIT ENTRIES *
read table itab_bkpf into wa_bkpf with key
bukrs = itab_bseg_debit-bukrs
gjahr = itab_bseg_debit-gjahr
belnr = itab_bseg_debit-belnr binary search.
itab_output-belnr = itab_bseg_debit-belnr.
itab_output-bukrs = itab_bseg_debit-bukrs.
itab_output-budat = wa_bkpf-budat.
itab_output-buzei = itab_bseg_debit-buzei.
itab_output-hkont = itab_bseg_debit-hkont.
itab_output-blart = wa_bkpf-blart.
itab_output-shkzg = itab_bseg_debit-shkzg.
itab_output-wrbtr = itab_bseg_debit-wrbtr.
itab_output-pswsl = itab_bseg_debit-pswsl.
itab_output-dmbtr = itab_bseg_debit-dmbtr.
itab_output-sgtxt = itab_bseg_debit-sgtxt.
itab_output-zuonr = itab_bseg_debit-zuonr.
append itab_output.
itab_output-belnr = itab_bseg_credit-belnr.
itab_output-bukrs = itab_bseg_credit-bukrs.
itab_output-budat = wa_bkpf-budat.
itab_output-buzei = itab_bseg_credit-buzei.
itab_output-hkont = itab_bseg_credit-hkont.
itab_output-blart = wa_bkpf-blart.
itab_output-shkzg = itab_bseg_credit-shkzg.
itab_output-wrbtr = itab_bseg_credit-wrbtr.
itab_output-pswsl = itab_bseg_credit-pswsl.
itab_output-dmbtr = itab_bseg_credit-dmbtr.
itab_output-sgtxt = itab_bseg_credit-sgtxt.
itab_output-zuonr = itab_bseg_credit-zuonr.
append itab_output.
endif.
endloop.
sort itab_output by belnr budat shkzg.
LOOPING OUTPUT INTERNAL TABLE *
*FORMAT INTENSIFIED INPUT.
*FORMAT INVERSE ON.
loop at itab_output.
format hotspot on.
format color 5 inverse.
write :/ sy-vline,
000 itab_output-belnr, 12 sy-vline,
013 itab_output-bukrs, 17 sy-vline,
019 itab_output-budat, sy-vline,
034 itab_output-buzei, 40 sy-vline,
042 itab_output-hkont, sy-vline,
054 itab_output-blart, 60 sy-vline,
065 itab_output-shkzg, 70 sy-vline,
072 itab_output-wrbtr, sy-vline,
085 itab_output-pswsl, sy-vline,
093 itab_output-dmbtr, sy-vline,
106 itab_output-sgtxt, sy-vline,
itab_output-zuonr, sy-vline.
format hotspot off.
endloop.
uline 0(139).
<b>Regards,
Jackie.</b> -
How to read a table from a word file, using HWPF
How can I read a table from a Word file using HWPF?
I looked in API and Table class doesn't seem to have a constructor... very very strange for me. pls helpthe constructor is HWPFDocument = new HWPFDocument(/*file*/)
Here is the API for that
http://poi.apache.org/apidocs/org/apache/poi/hwpf/HWPFDocument.html
Also here is another link to something that might help you more with tables
http://www.aspose.com/Community/forums/thread/79182.aspx -
How to replicate cluster table into BW on HANA using SLT?
Hi Members,
We have a requirement to replicate cluster table from SAP ECC (Ex:BSEG) into BW 7.4 on HANA using SLT. We know that HANA SLT is capable of replicating cluster table but it looks like BW-SLT is not capable of doing the same.
Please clarify on this and any documentation in this regard will be very helpful.
Also wondering if the current release of BW-SLT can be used to replicate Cluster tables from SAP?
Thanks & Regards
Shankar ChintadaHi Shankar,
I dont understand , why you have doubt on BW-SLT???
Using SLT you can replicate the tables pool or cluster .
If you have more specific requirment please share the details
As per above information in your enviorment it is possible.
You can check below thread for more infor.
SLT: Mass Tables for Replication to HANA
BR
AKJ -
How to read a table and transfer the data into an internal table?
Hello,
I try to read all the data from a table (all attribute values from a node) and to write these data into an internal table. Any idea how to do this?
Thanks for any help.Hi,
Check this code.
Here i creates context one node i.e flights and attributes are from SFLIGHT table.
DATA: lo_nd_flights TYPE REF TO if_wd_context_node,
lo_el_flights TYPE REF TO if_wd_context_element,
ls_flights TYPE if_main=>element_flights,
it_flights type if_main=>elements_flights.
navigate from <CONTEXT> to <FLIGHTS> via lead selection
lo_nd_flights = wd_context->get_child_node( 'FLIGHTS' ).
CALL METHOD LO_ND_FLIGHTS->GET_STATIC_ATTRIBUTES_TABLE
IMPORTING
TABLE = it_flights.
now the table data will be in internal table it_flights. -
How to read internal table data and use to retrive from other table.
Hi all,
I am trying to generate a report using ooabap.
In this scenario, I retrieved data from one standard table (zcust) and successfully displayed using structure 'i_zcust_final' ( i_zcust_final is similar structure of zcust).
Now I want to get some other data from other standard table (zpurch) using the data in i_zcust_final. How....???? I am unable to read data from i_zcust_final even i kept in loop.
I am attaching the code here.. even it too long, please look at the code and suggest me what to do.
code **************************
REPORT ZBAT_OOPS_REPORT1.
TABLES: ZCUST.
D E F I N I T I O N *****
CLASS BATLANKI_CLS DEFINITION.
PUBLIC SECTION.
DATA : ITAB_ZCUST TYPE STANDARD TABLE OF ZCUST,
I_ZCUST_FINAL LIKE LINE OF ITAB_ZCUST,
ITAB_ZCUST1 TYPE STANDARD TABLE OF ZCUST.
TYPES: BEGIN OF IT_ZPURCH,
CUSTNUM TYPE ZPURCH-CUSTNUM,
PURC_DOC TYPE ZPURCH-PURC_DOC,
VENDOR TYPE ZPURCH-VENDOR,
STATUS TYPE ZPURCH-STATUS,
PURC_ORG TYPE ZPURCH-PURC_ORG,
END OF IT_ZPURCH.
DATA : ITAB_ZPURCH TYPE TABLE OF IT_ZPURCH,
I_ZPURCH_FINAL LIKE LINE OF ITAB_ZPURCH.
METHODS: GET_ZCUST,
PRINT_ZCUST,
GET_ZPURCH.
ENDCLASS.
I N I T I A L I Z T I O N *****
SELECT-OPTIONS:S_CUSNUM FOR ZCUST-CUSTNUM.
INITIALIZATION.
S_CUSNUM-LOW = '0100'.
S_CUSNUM-HIGH = '9999'.
S_CUSNUM-OPTION = 'BT'.
S_CUSNUM-SIGN = 'I'.
APPEND S_CUSNUM.
CLEAR S_CUSNUM.
I M P L E M E N T A T I O N *****
CLASS BATLANKI_CLS IMPLEMENTATION.
METHOD GET_ZCUST.
SELECT * FROM ZCUST
INTO TABLE ITAB_ZCUST
WHERE CUSTNUM IN S_CUSNUM.
ENDMETHOD.
METHOD PRINT_ZCUST.
LOOP AT ITAB_ZCUST INTO I_ZCUST_FINAL.
WRITE:/ I_ZCUST_FINAL-CUSTNUM,
I_ZCUST_FINAL-CUSTNAME,
I_ZCUST_FINAL-CITY,
I_ZCUST_FINAL-EMAIL.
ENDLOOP.
ENDMETHOD.
METHOD GET_ZPURCH.
LOOP AT ITAB_ZCUST INTO ITAB_ZCUST1.
SELECT CUSTNUM
PURC_DOC
VENDOR
STATUS
PURC_ORG
FROM ZPURCH
INTO CORRESPONDING FIELDS OF TABLE ITAB_ZPURCH
WHERE CUSTNUM EQ I_ZCUST_FINAL-CUSTNUM.
ENDLOOP.
LOOP AT ITAB_ZPURCH INTO I_ZPURCH_FINAL.
WRITE:/ I_ZPURCH_FINAL-CUSTNUM,
I_ZPURCH_FINAL-PURC_DOC,
I_ZPURCH_FINAL-VENDOR,
I_ZPURCH_FINAL-STATUS,
I_ZPURCH_FINAL-PURC_ORG.
ENDLOOP.
ENDMETHOD.
ENDCLASS.
O B J E C T *****
DATA: BATLANKI_OBJ TYPE REF TO BATLANKI_CLS.
START-OF-SELECTION.
CREATE OBJECT BATLANKI_OBJ.
CALL METHOD:
BATLANKI_OBJ->GET_ZCUST,
BATLANKI_OBJ->PRINT_ZCUST,
BATLANKI_OBJ->GET_ZPURCH.
Can anyone suggest me..
Thanks in advance,
Surender.Hi Surendar..
There is mistake in the Work area specification in this method.
METHOD GET_ZPURCH.
LOOP AT ITAB_ZCUST INTO ITAB_ZCUST1.
SELECT CUSTNUM
PURC_DOC
VENDOR
STATUS
PURC_ORG
FROM ZPURCH
INTO CORRESPONDING FIELDS OF TABLE ITAB_ZPURCH
<b>WHERE CUSTNUM EQ ITAB_ZCUST1-CUSTNUM.</b>
"Instead of I_ZCUST_FINAL-CUSTNUM.
ENDLOOP.
LOOP AT ITAB_ZPURCH INTO I_ZPURCH_FINAL.
WRITE:/ I_ZPURCH_FINAL-CUSTNUM,
I_ZPURCH_FINAL-PURC_DOC,
I_ZPURCH_FINAL-VENDOR,
I_ZPURCH_FINAL-STATUS,
I_ZPURCH_FINAL-PURC_ORG.
ENDLOOP.
ENDMETHOD.
Now it should work..
One more thing : From performance point of view you have to Replace that loop using FOR ALL ENTRIES . And avoid CORRESPONDING FIELDS. it will be slow.
This is the code.
LOOP AT ITAB_ZCUST INTO ITAB_ZCUST1.
if ITAB_ZCUST[] IS NOT INITIAL.
SELECT CUSTNUM
PURC_DOC
VENDOR
STATUS
PURC_ORG
FROM ZPURCH
INTO TABLE ITAB_ZPURCH
<b>for all entries in ITAB_ZCUST1</b>
<b>WHERE CUSTNUM EQ ITAB_ZCUST1-CUSTNUM.</b>
"Instead of I_ZCUST_FINAL-CUSTNUM.
ENDIF.
ENDLOOP.
<b>Reward if Helpful.</b> -
How to read internal table other program (assign?)
Hello techies,
The problem >
I have 2 Sap standard programs A & B
I'm editing a userexit in program B but I need to read
data from program A that is also running.
While using the debugger, I can ask for the folowing
(A)internaltable
example : (SAPLMEPO)pot
this shows the content of internal table "pot" of the program "SAPLMEPO".
The question>
How can I copy the content of a table(ex. pot) in program "A"(ex. SAPLMEPO) to a internal table pot2 of program "B"?
Possible sollution (does not work in 5.0)
CODE SAMPLE *************
Fields **
data: w_name type char50,"help field
w_recpot like ekpo."help structure
Internal tables **
data: Begin of it_pot2 occurs 0.
include structure it_pot2.
data: End of it_pot2
field-symbols <fs_pot> type any table.
w_structure_name = '(SAPLMEPO)pot'.
assign (w_structure_name) to <fs_pot>.
loop at <fs_pot> into w_recpot.
it_pot2 = w_recpot.
append it_pot2
Endloop.
END CODE SAMPLE *************
Thanks in advance,
FrederikHi again,
1. Simple.
2. In your case, u should use
<b>[]</b>
DATA : myitab LIKE TABLE OF t001 WITH HEADER LINE.
DATA : w_struct_name(100) TYPE c.
BREAK-POINT.
FIELD-SYMBOLS <fs_pot> TYPE ANY TABLE.
<b> w_struct_name = '(ZAM_TEMP0)ITAB[]'.</b>
ASSIGN (w_struct_name) TO <fs_pot>.
3. No need to use Loop etc.
4. *----
In your case
CODE SAMPLE *************
Fields **
data: w_name type char50,"help field
w_recpot like ekpo."help structure
Internal tables **
data: Begin of it_pot2 occurs 0.
include structure it_pot2.
data: End of it_pot2
field-symbols <fs_pot> type any table.
w_structure_name = '<b>(SAPLMEPO)POT[]</b>'.
assign (w_structure_name) to <fs_pot>.
NOT REQUIRED
*loop at <fs_pot> into w_recpot.
*it_pot2 = w_recpot.
*append it_pot2
*Endloop.
END CODE SAMPLE *************
regards,
amit m. -
How to read JCO Table parameter
Hello
I am calling Java function from ABAP side (JCO outbound call). Right now, in the java program I can get the import parameter data, but not the table parameter data. I am using the famous example5.java and the ABAP code is like below:
PARAMETERS: requtext LIKE sy-lisel.
DATA: echotext LIKE sy-lisel,
resptext LIKE sy-lisel,
rfctest TYPE TABLE OF rfctest,
wa_rfctest TYPE rfctest.
wa_rfctest-rfcdata1 = requtext.
wa_rfctest-rfcdata2 = 'Hello World'.
APPEND wa_rfctest TO rfctest.
CALL FUNCTION 'STFC_CONNECTION'
DESTINATION 'JCO'
EXPORTING
requtext = requtext
IMPORTING
echotext = echotext
resptext = resptext
TABLES
rfctest = rfctest.
In the java side it is defined as:
JCO.MetaData fmeta = new JCO.MetaData("STFC_CONNECTION");
fmeta.addInfo("REQUTEXT", JCO.TYPE_CHAR, 16, 0, 0, JCO.IMPORT_PARAMETER, null);
fmeta.addInfo("ECHOTEXT", JCO.TYPE_CHAR, 255, 255, 0, JCO.EXPORT_PARAMETER, null);
fmeta.addInfo("RESPTEXT", JCO.TYPE_CHAR, 255, 512, 0, JCO.EXPORT_PARAMETER, null);
fmeta.addInfo("RFCTABLE", JCO.TYPE_TABLE, 144, 0, 0, 0, "RFCTEST");
Also RFCTEST structure is defined ( omitted here)
In the handleRequest(JCO.Function function), the following code:
if (function.getName().equals("STFC_CONNECTION")) {
output.setValue(input.getString("REQUTEXT"),"ECHOTEXT");
JCO.Table tab = tables.getTable("RFCTABLE");
System.out.println("RFCTABLE rows = " + tables.getTable("RFCTABLE").getNumRows());
I always get 0 rows in the table RFCTABLE. I checked the trace file in the Java side, I can see the table data are indeed passed to Java side, the JCO just can't pass the data through the API.
Any one has idea of it?
Thank you very much.
JaysonAndre
I have read the function Structure of J_1B_NFE_XML_OUT and i don't find the TableParameter or ExportParameter for this FM.
How do you actually get your return parameter?
I don't think here the table type is JCO.Table.
And i don't know how to use this Function . So i can't test my assumption.
JCO.Table tab = function.getImportParameterList().getTable( "XML_ITEM_TAB" );
normally people use the JCO.Table tab=function.getTableParameterList().getTable();
But XML_ITEM_TAB is not a Table parameter.
I don't know if table type from importParmeter can convert themself like that.But you still can try it.
hope that be helpful! -
How to read a table/structure value in a container from a Z program
Experts,
I have a WF with one of the container element is a multiline table element of the strucuture BSEG. Now I have a report where given a WID, i need to read the contents of this structure from the workflow container and display in ALV grid.
I'm using the FM SAP_WAPI_READ_CONTAINER or SWW_WI_CONTAINER_READ to read the container. No issues till here now.
I'm able to read the contents of the attributes that are simple without being in a structure/table.
But, how do i read the values from the table/structure in the container from this FM?
I see lots of threads talking about SWC_GET_TABLE or something like that. But I don't know whether and how to use it in my scenario. Any sample programs will be greatly appreciated.
Thanks,
SamHey,
No issues. I sorted out myself. Glory to God in the Heavens!
-Sam
Maybe you are looking for
-
Can't download itunes update. Keep getting this error message: THe program can't start because MSVCR80.dll is missing from your computer. Try reinstalling the program to fix this problem
-
I am trying to add a video to my Keynote presentation on my iPad. Ideally I would like to be able to play the video in the presenation sream rather than switch between apps. Since I am 2 hours away from my computer to use iTunes syncing to move them
-
My trackpad was not working correctly and now when i use a mouse it wont work eather.
I have a Mac Book Pro 13" and for months now my track pad was acting up. When i was watching youtube it would randomly pause and zoom in and other things like that. I am going away and me and my sister have to share it and because her computer is fin
-
Flash stops after 36 hours from running...
hi friends, i have a problem since 2 weeks.. i write a as3 program. Program is getting data from xml files (4 files) and display to the screen between 30 seconds spaces. But program is running no error 36 hours. After 36 hours flash say this error co
-
Notification when customer master range exceesd 95%
Hi, Our customer master number range was almost over..... Luckily we noticed it and we extened the number range. So we are planning to set up a notification such that it notifies via email when customer master number range is used 95%. Any of you hav