Tell me one thing what is the seqence setting, tell me one thing what is the seqence setting
hi need the seqenced setting in the fcp
Sequence settings are generally set to whatever the flavor of the video you've captured is. However... it is limited to specific types of video formats.
Do a quick search on SEQUENCE SETTINGS in the help manual located under the HELP menu in FCP.
Good luck,
CaptM
Similar Messages
-
When I open Firefox , and go to AOL.com it goes to the home page with a message to up grade. I have tried that it tells me I can not do it on my operating system MAC 10.4. Now when I sign on to Aol to use my favorites some time it lets me on, but if i write something e-mail or such it sends it them tells me error message Offline mode check off in file which I do, but it shuts down the internet. I cannot get back on.
You are right, but how could i send it to Apple? when the phone company first replaced my iphone they had in stock alots of iphones and they just sent mine back to Apple and gave me a new one, so all i did is to give them my phone, but now how could i sent it to Apple? and i cant send it by myself, and the store wont do that, its a lost for them.. so sending it to Apple wasnt an option from the begining.
and for the record, i dont think the store where i bought it is an authorized shop.. its just a store who boughts phone's from Apple in a low price and sells it in much more money.. -
My imac will not load after I enter my password. The only thing I get is the arrow from my mouse on top of a blank white screen. Can anyone tell me what this is? I've restarted and turned off several times. I left it on in this state for 8 hours hoping it would reload and work. No luck.
Hello KCC4ME,
You may try booting your Mac in Safe Boot, as it can resolve many issues that may prevent a successful login.
OS X: What is Safe Boot, Safe Mode?
http://support.apple.com/kb/HT1564
If a Safe Boot allows you to successfully log in, you may have issues with one or more login itmes (while the following article is labelled as a Mavericks article, it is viable for earlier versions of the Mac OS, as well).
OS X Mavericks: If you think you have incompatible login items
http://support.apple.com/kb/PH14201
Cheers,
Allen -
Can some one please tell me what is the problem in the below pl/sql block
Hi, I have problem with the following pl/sql block, I need this with bulk operation.
-- Assume the following scenario, we are validating dept (master) and emp(child) which are my temporary tables and updating the status back to
-- dept ( for all the validation errors, even if we have any validation at child it has to update the header record with error message),
-- upon successful validation insert the data into dept3, and emp3 interms of batches
-- I have give the sample example with dept and emp, but i have around 10 million records which has around 30-40 validations,
-- I would like to process them in terms of batches using bulk collection as this would do fast processing
-- Can some one please tell me how to insert them in terms of bulk with every set of 1000 records in each batch in this example,for every set of 1000 records
-- i need update batch id with unique number in dept table
-- with current data i can have 50 batches , I need to pass, deptno as parameter to my emp cursor.
-- can some one please tell me how to make this validation and insertion more efficient. so that while inserting the data for every batch it should insert batch id
-- Tried with LIMIT clause as well but not working
-- I am correcting the code as per your comments Request you to please suggest me so that I can correct , I am new to PL/sql, started learning now.
step - 1:
CREATE TABLE DEPT
(DEPTNO NUMBER(6) primary key,
DNAME VARCHAR2(25),
LOC VARCHAR2(23),
batch_id number );
INSERT INTO DEPT VALUES (10, 'ACCOUNTING', 'NEW YORK', null);
INSERT INTO DEPT VALUES (20, 'RESEARCH', 'DALLAS', null);
INSERT INTO DEPT VALUES (30, 'SALES', 'CHICAGO', null);
INSERT INTO DEPT VALUES (40, 'OPERATIONS', 'BOSTON', null);
step - 2:
declare
begin
for i in 1..50000 loop
insert into dept values(40+i, 'OPERATIONS'||i,'BOSTON'||i, null);
end loop;
commit;
exception
when others then
dbms_output.put_line('Exception occured:'||SQLERRM);
end;
step - 3:
create sequence emp_seq start with 1 increment by 1;
step - 4:
CREATE TABLE EMP
(EMPNO NUMBER(15) NOT NULL primary key,
ENAME VARCHAR2(20),
JOB VARCHAR2(20),
MGR NUMBER(4),
HIREDATE DATE,
SAL NUMBER(7, 2),
COMM NUMBER(7, 2),
DEPTNO NUMBER(6));
INSERT INTO EMP VALUES
(7369, 'SMITH', 'CLERK', 7902,
TO_DATE('17-DEC-1980', 'DD-MON-YYYY'), 800, NULL, 20);
INSERT INTO EMP VALUES
(7499, 'ALLEN', 'SALESMAN', 7698,
TO_DATE('20-FEB-1981', 'DD-MON-YYYY'), 1600, 300, 30);
INSERT INTO EMP VALUES
(7521, 'WARD', 'SALESMAN', 7698,
TO_DATE('22-FEB-1981', 'DD-MON-YYYY'), 1250, 500, 30);
INSERT INTO EMP VALUES
(7566, 'JONES', 'MANAGER', 7839,
TO_DATE('2-APR-1981', 'DD-MON-YYYY'), 2975, NULL, 20);
INSERT INTO EMP VALUES
(7654, 'MARTIN', 'SALESMAN', 7698,
TO_DATE('28-SEP-1981', 'DD-MON-YYYY'), 1250, 1400, 30);
INSERT INTO EMP VALUES
(7698, 'BLAKE', 'MANAGER', 7839,
TO_DATE('1-MAY-1981', 'DD-MON-YYYY'), 2850, NULL, 30);
INSERT INTO EMP VALUES
(7782, 'CLARK', 'MANAGER', 7839,
TO_DATE('9-JUN-1981', 'DD-MON-YYYY'), 2450, NULL, 10);
INSERT INTO EMP VALUES
(7788, 'SCOTT', 'ANALYST', 7566,
TO_DATE('09-DEC-1982', 'DD-MON-YYYY'), 3000, NULL, 20);
INSERT INTO EMP VALUES
(7839, 'KING', 'PRESIDENT', NULL,
TO_DATE('17-NOV-1981', 'DD-MON-YYYY'), 5000, NULL, 10);
INSERT INTO EMP VALUES
(7844, 'TURNER', 'SALESMAN', 7698,
TO_DATE('8-SEP-1981', 'DD-MON-YYYY'), 1500, NULL, 30);
INSERT INTO EMP VALUES
(7876, 'ADAMS', 'CLERK', 7788,
TO_DATE('12-JAN-1983', 'DD-MON-YYYY'), 1100, NULL, 20);
INSERT INTO EMP VALUES
(7900, 'JAMES', 'CLERK', 7698,
TO_DATE('3-DEC-1981', 'DD-MON-YYYY'), 950, NULL, 30);
INSERT INTO EMP VALUES
(7902, 'FORD', 'ANALYST', 7566,
TO_DATE('3-DEC-1981', 'DD-MON-YYYY'), 3000, NULL, 20);
INSERT INTO EMP VALUES
(7934, 'MILLER', 'CLERK', 7782,
TO_DATE('23-JAN-1982', 'DD-MON-YYYY'), 1300, NULL, 10);
commit;
step :- 5
declare
cursor c1 is select * from dept;
k number:=0;
m number:=0;
begin
for i in c1 loop
k:=k+1;
--dbms_output.put_line('k:'||k);
--dbms_output.put_line('i.deptno:'||i.deptno);
m:=0;
for j in 1..5 loop
m:=m+1;
--dbms_output.put_line('m:'||m);
--dbms_output.put_line('i.deptno:'||i.deptno);
insert into emp values
(9000+emp_seq.nextval, 'SMITH'||'_'||emp_seq.currval, 'CLERK'||'_'||emp_seq.currval, 7902,
TO_DATE('17-DEC-1980', 'DD-MON-YYYY'), 800, NULL, i.deptno);
end loop;
end loop;
commit;
exception
when others then
dbms_output.put_line('Exception occured:'||sqlerrm);
end;
step :-6
create table dept3 as select * from dept where 1=2;
create table emp3 as select * from emp where 1=2;
alter table dept add object_id number;
alter table dept add status varchar(20);
alter table dept add err_msg varchar2(200);
alter table emp add object_id number;
-- I have not included the alter statements in the inital creation because i dont want them to insert into dept3 and emp3
CREATE OR REPLACE
PACKAGE test_b
AS
g_batch_id NUMBER;
PROCEDURE emp_ins(
p_EMPNO NUMBER,
p_ENAME VARCHAR2,
p_JOB VARCHAR2,
p_MGR NUMBER,
p_HIREDATE DATE,
p_SAL NUMBER,
p_COMM NUMBER,
p_DEPTNO NUMBER);
PROCEDURE dept_ins(
p_DEPTNO NUMBER,
p_dname VARCHAR2 ,
p_LOC VARCHAR2,
p_batch NUMBER);
PROCEDURE validate_prc;
PROCEDURE main;
TYPE dept_t
IS
TABLE OF dept%ROWTYPE;
hdr_tbl dept_t;
TYPE emp_t
IS
TABLE OF emp%ROWTYPE;
line_tbl emp_t;
TYPE dept_i_t
IS
TABLE OF dept3%ROWTYPE;
hdr_ins_tbl dept_i_t;
TYPE emp_i_t
IS
TABLE OF emp3%ROWTYPE;
line_ins_tbl emp_i_t;
END;
-- pacakge body
CREATE OR REPLACE
PACKAGE body test_b
AS
PROCEDURE emp_ins(
p_EMPNO NUMBER,
p_ENAME VARCHAR2,
p_JOB VARCHAR2,
p_MGR NUMBER,
p_HIREDATE DATE,
p_SAL NUMBER,
p_COMM NUMBER,
p_DEPTNO NUMBER)
IS
BEGIN
INSERT
INTO EMP3
EMPNO ,
ENAME ,
JOB ,
MGR ,
HIREDATE ,
SAL ,
COMM ,
DEPTNO
VALUES
P_EMPNO ,
P_ENAME ,
P_JOB ,
P_MGR ,
P_HIREDATE ,
P_SAL ,
P_COMM ,
P_DEPTNO
EXCEPTION
WHEN OTHERS THEN
DBMS_OUTPUT.PUT_LINE('EXCEPTION AT EMP INSERT'||SQLERRM);
END;
PROCEDURE dept_ins
p_DEPTNO NUMBER,
p_dname VARCHAR2 ,
p_LOC VARCHAR2,
p_batch NUMBER
IS
BEGIN
INSERT
INTO DEPT3
DEPTNO ,
DNAME ,
LOC ,
batch_id
VALUES
p_DEPTNO ,
p_DNAME ,
p_LOC ,
p_batch
EXCEPTION
WHEN OTHERS THEN
DBMS_OUTPUT.PUT_LINE('EXCEPTION AT DEPT INSERT'||SQLERRM);
END ;
PROCEDURE validate_prc
IS
CURSOR c1
IS
SELECT * FROM dept WHERE status IS NULL ;--AND rownum <25;
CURSOR c2(p_dept NUMBER )
IS
SELECT * FROM emp WHERE deptno=p_dept;
e_validation EXCEPTION;
BEGIN
OPEN c1;
LOOP
FETCH c1 BULK COLLECT INTO hdr_tbl limit 5000;
SELECT emp_seq.nextval INTO g_batch_id FROM dual;
EXIT
WHEN hdr_tbl.count = 0;
dbms_output.put_line('batch'||g_batch_id);
END LOOP;
CLOSE c1;
dbms_output.put_line('C1 closed');
--------- Loading data into the inv line table type -------------------------------
FOR i IN 1 .. hdr_tbl.count
LOOP
dbms_output.put_line('started validation');
-- do header level validations
IF hdr_tbl(i).dname IS NULL THEN
hdr_tbl(i).status := 'ERROR';
hdr_tbl(i).err_msg :=',DNAME is null';
END IF;
OPEN c2(hdr_tbl(i).deptno);
LOOP
FETCH c2 BULK COLLECT INTO line_tbl;
-- EXIT WHEN c2%NOTFOUND;
END LOOP;
CLOSE c2;
FOR j IN 1 .. line_tbl.count
LOOP
-- do line validations
IF line_tbl(j).ename IS NULL THEN
hdr_tbl(i).status := 'ERROR';
hdr_tbl(i).err_msg :=',ENAME is null';
END IF;
BEGIN
FORALL j IN line_tbl.FIRST .. line_tbl.LAST
SAVE EXCEPTIONS
UPDATE EMP
SET object_id =3
-- I have multiple columns to update based on validations
WHERE deptno =hdr_tbl(i).deptno------------
AND empno =line_tbl (j).empno;
COMMIT;
line_tbl.DELETE;
dbms_output.put_line( 'Successfully updated emp temp table.');
EXCEPTION
WHEN OTHERS THEN
ROLLBACK;
dbms_output.put_line( 'Error while updating line temp table. ' || sqlerrm );
FOR j IN 1 .. sql%BULK_EXCEPTIONS.COUNT
LOOP
DBMS_OUTPUT.put_line(' occurred during line temp table updation ' || sql%BULK_EXCEPTIONS(i).ERROR_INDEX );
END LOOP;
raise e_validation;
END;
END LOOP; -- j
--CLOSE c2;
IF hdr_tbl(i).err_msg IS NULL THEN
hdr_tbl (i).status := 'VALID';
hdr_tbl (i).err_msg := NULL;
END IF;
-- even if I have line validation failed I have to update header status and erorr msg
BEGIN
FORALL i IN hdr_tbl.FIRST .. hdr_tbl.LAST
SAVE EXCEPTIONS
UPDATE DEPT
SET object_id =4,
status = hdr_tbl (i).status,
err_msg = hdr_tbl (i).err_msg
-- batch_id =
-- I have multiple columns to update based on validations
WHERE deptno = hdr_tbl (i).deptno
AND status IS NULL; ------------
COMMIT;
hdr_tbl.DELETE;
dbms_output.put_line( 'Successfully updated dept temp table.');
--close c1;
EXCEPTION
WHEN OTHERS THEN
ROLLBACK;
dbms_output.put_line( 'Error while updating hdr temp table. ' || sqlerrm );
FOR i IN 1 .. sql%BULK_EXCEPTIONS.COUNT
LOOP
DBMS_OUTPUT.put_line(' occurred during line temp table updation ' || sql%BULK_EXCEPTIONS(i).ERROR_INDEX );
END LOOP;
raise e_validation;
END;
END LOOP; --i
EXCEPTION
WHEN OTHERS THEN
DBMS_OUTPUT.PUT_LINE('EXCEPTION AT validate'||SQLERRM);
END ;
PROCEDURE main
IS
CURSOR dept_ins_cur
IS
SELECT * FROM dept WHERE status='VALID';
CURSOR emp_ins_cur(p_deptno NUMBER)
IS
SELECT * FROM emp WHERE deptno= p_deptno;
BEGIN
validate_prc;
OPEN dept_ins_cur;
LOOP
FETCH dept_ins_cur BULK COLLECT INTO hdr_ins_tbl limit 1000
EXIT
WHEN dept_ins_cur%NOTFOUND;
END LOOP;
CLOSE dept_ins_cur;
--------- Loading data into the inv line table type -------------------------------
FOR i IN 1 .. hdr_tbl.count
loop
dept_ins(hdr_ins_tbl(i).deptno ,
hdr_ins_tbl(i).DNAME ,
hdr_ins_tbl(i).LOC , emp_seq.nextval);
commit;
OPEN emp_ins_cur(hdr_ins_tbl(i).deptno);
LOOP
FETCH emp_ins_cur BULK COLLECT INTO line_ins_tbl;
--EXIT WHEN emp_ins_cur%NOTFOUND;
END LOOP;
CLOSE emp_ins_cur;
for j in 1..line_ins_tbl.count loop
emp_ins(line_ins_tbl(j).EMPNO ,
line_ins_tbl(j).ENAME ,
line_ins_tbl(j).JOB ,
line_ins_tbl(j).MGR ,
line_ins_tbl(j).HIREDATE ,
line_ins_tbl(j).SAL ,
line_ins_tbl(j).comm ,
line_ins_tbl(j).DEPTNO );
end loop;
end loop;
commit;
BEGIN
forall i IN hdr_ins_tbl.first .. hdr_ins_tbl.last
SAVE exceptions
UPDATE dept
SET status = 'INSERTED',
err_msg = null
WHERE deptno=hdr_ins_tbl (i).deptno
AND status = 'VALID';
COMMIT;
hdr_ins_tbl.delete;
dbms_output.put_line( 'inserting into temp tables.');
EXCEPTION
WHEN OTHERS THEN
rollback;
end;
EXCEPTION
WHEN OTHERS THEN
dbms_output.put_line('exception in main' ||SQLERRM);
END ;
END;
Thanks in advance...
Message was edited by: 888025Hi, I have problem with the following pl/sql block
Well, as Hoek already said, that is the understatement of the century.
I can't be absolutely certain but I think that set of DDL and code that you posted has just about every possible error and design issue that there is! It would make an excellent addition to BluShadow's FAQs an an example of what NOT to do.
I don't think it is even possible to 'fix the basics first' as Hoek suggested. IMHO the first step needs to be to create a functional requirements document (FRD) that explains in detail WHAT needs to be done. That doc should also contain info about how any errors/recovery/restart is to be handled. It is premature to try to implement ANY solution without first knowing what is needed functionally.
Once the FRD is done you should do a walk-through based on your current architecture and sample data to make sure that the document really covers ALL of the steps that need to be performed and that it adequately explains how to deal with any processing or data issues that might arise.
The next document you need is the TRD - Technical Requirements Doc that covers the different technical implementions of the FRD that can be done and the advantages/disadvantages of each.
Then you can start working on a prototype.
1. The DDL you posted isn't coherent - there are CREATE table statements and then later ALTER statements that add additional columns. There doesn't appear to be any reason for not including ALL of the columns in the CREATE table statement.
2. You are using PL/SQL types instead of SQL types. That makes it impossible to use those types in SQL statements and makes it much more difficult to test since it is much easier to test a query in SQL (e.g. using sql*plus) that to embed the query in PL/SQL.
3. You are defining the same type twice but giving it different names.
TYPE dept_t
IS
TABLE OF dept%ROWTYPE
INDEX BY binary_integer;
TYPE dept_i_t
IS
TABLE OF dept%ROWTYPE
INDEX BY binary_integer;
Those are both based on the same DEPT table! Why the duplication?
Also you are using associative arrays instead of just using nested tables. Get rid of the INDEX BY clause.
4. You have some serious architectural and data model issues
-- Assume the following scenario, we are validating dept (master) and emp(child) which are my temporary tables and updating the status back to
-- dept ( for all the validation errors, even if we have any validation at child it has to update the header record with error message),
Why would you do that? You say 'it has to update the header record ...'. Says who? That is just one indication that you are trying to implement a 'solution' before you have adequately defined the 'problem'.
Typically you would NOT alter any of the data tables; any validation errors/issues would get inserted into a table specifically designed to hold/log those issues. That table would contain key field values to correlate with the source of the error.
Those 'master' and 'child' entities are two SEPARATE things. Issues with a 'master' row have NOTHING to do with any possible child rows.
And issues with a 'child' row have NOTHING to do with any possible master rows. The ONLY connection between 'child' and 'master' is the foreign key that correlates them.
So you don't necessarily have to validate the 'child' rows in sync with their 'master' row. In many cases you would have a procedure that performs validation of the entire set of 'master' rows and log those issues/problems. You would use a different procedure to validate the entire set of 'child' rows and log their issues.
Those validation procedures can often work with ALL of the data using SQL statements instead of bulk processing.
5. You are using loop constructs that are not valid for the type of processing you are using
LOOP
FETCH c1 BULK COLLECT INTO hdr_tbl;
EXIT
WHEN c1%NOTFOUND;
END LOOP;
There can be NO exit since the bulk collect with either get EVERYTHING or NOTHING. Possibly that is just a holdover from your attempt to use the LIMIT clause but you removed that clause from the FETCH; I don't know.
There is so much wrong with what you posted it is really rather pointless to try to 'fix' it.
I suggest you start over and clarify and DOCUMENT the actual requirements without prejudice about the solution that someone seems to want to force on you. -
WHEN I TRY TO BURN MUSIC FROM MY PLAYLIST TO A BLANK CD, THE NOTIFICATION COMES UP AND TELLS ME I AM EXCEEDING THE NUMBER OF MINUTES THE CD WILL HOLD. THIS NOTIFICATION HAPPENS EVEN IF I TRY TO BURN JUST ONE SONG. WHAT'S GOING ON?
Katy, you are completely doing things in the wrong order. You can't burn songs if you can't even play them, and iTunes can't play them if it can't find them.
The exclamation point normally occurs if the song file, or one of its containing folders, has been moved, renamed or deleted. So if you encounter a track with an exclamation point, don't do anything else until you find the file. It is usually somewhere else on your hard drive, or else in the Recycle bin. Failing both of those, get it from your most recent backup.
After your restore it, make sure it can play. If it can play you can put it into a playlist. Then you can burn the playlist. -
My i phone was stolen and I was wondering what the exact thing to do is! Also how can i send an email to apple to tell them to lock my phone permanantely?? Helpp!!
Check this out https://discussions.apple.com/docs/DOC-3362, thanks to Kappy. Contact your carrier, they would be the only one that could possibly blacklist your phone, if they provide that service.
-
evry time after sync. my iphone 4 ios 4.3.3 with itunes 10.3.1.55 the time change up one more hour ,, please tell me what can i do to solve this problem
This year, the government has canceled the daylight saving time , that's why happening this problem to me so I changed the time zone in iPhone from Cairo,Egypt (GMT+2 with daylight saving) to Harare,Zimbabwe (GMT+2 without daylight saving , no change in time from summer & winter) & now working good, no change in time after sync. , But it's very stupid thing from apple that they didn't add an option in time setting to enable or disable the daylight saving time like any other mobile.
-
Good day, tell me what to do iphone 4s bought preowned raised to 7.2 firmware but it requires aktivatsyi apple id but I do not know it because they do not buy a new one. and contact the seller lost in what to do now tell me?
There is no way around the activation lock. You apparently decided to use the phone with someone else's ID set up for an iCloud (and find my iPhone) account before updating. Since Find My iPhone was active, updating to iOS 7 has automatically turned on the activation lock. If you do not have the Apple ID and password that were previously used, then the phone is now useless. You can't activate it without that informaion.
Talk to whoever you bought the phone from if you can. If you can't, buy a new phone. -
every time i try to buy anything an error box pops up that says my apple ID has expired and i try making a new one but it keeps telling me the same thing. i cant find an answer to my problem no mater what i do.
Contact iTunes Customer Service and request assistance
Use this Link > Apple Support iTunes Store Contact -
Even if an iPod 5 is Stolen , and i buy another new one can, my old iPod5 deletes what ever its was on my iCloud account? and transfer the same thing as my old one to a new one?
iOS: Transferring information from your current iPhone, iPad, or iPod touch to a new device
-
I bought 2 new memory card to 4 grams each - replace them in your MacBook Pro 13-inch but it will not turn on - If you are installing a card for 2 and one for 4 d all works - tell me what could be the problem
I assume that you have installed new RAM in your MBP.
It would be helpful if you indicated the EXACT model/year MBP that you have.
What the the RAM specifications that you are trying to install?
Ciao. -
I've reset my PPAM before to get around Firmware lock, but I've upgraded to mountain lion and now need to do the same thing, but I can't reset the PRAM. I've heard of the chip that is on the post 2011 macs, but I must not have one? What to do? Also, I can not get start up chimes unless I have the factory startup disk in. Can the PRAM be reset with the factory startup disk in or must the mac boot from the hard drive? Need help.
Help for forgotten passcode > iOS: Forgotten passcode or device disabled after entering wrong passcode
When you have access to your iPhone again, FaceTime is a pre installed app that cannot be removed.
Try a search > iOS: Understanding Spotlight Search -
I opened my iPhoto library today which was stored on an external hard drive and several of my videos now will not play at all. The weird thing is that each file shows a duration of 1 second and when I open them it just shows one frame. What the !&%$#@ Where did my original video files go?
Sounds like a good plan, you can never be to safe and having a second External HD is safer than one.
The only thing that I would do different, is setup the 3T as my TimeMachine Backup and then erase and move my Photos, Videos and perhaps even iTunes Media to the 1T. That way you will have room to backup both the Internal Hard Drive and the 1T External Hard Drive to the 3T using TimeMachine.
Take your time, study and use the > Time Machine - Frequently Asked Questions if you get stuck or aren't sure how to make the move.
Also see > iPhoto: How to move the Library folder to a new location
iMovie ’08: Storing or moving your video library to an external hard disk
and > iTunes for Mac: Moving your iTunes Media folder -
hi i have an iphone 4 which is from canada nd i have seen one sim inside it which is a canadian sim ,iam staying in india so can i use that phone in india and please tell me what are the steps ihave to take for using that canadian phone in india
Only the carrier to whom the device is locked can authorize it's unlocking. Contact the carrier to see if they offer unlocking and if you qualify.
-
Messages has replaced all my text with a load of letter A's in boxes. What is that all about. When I type a new one it is fine until I hit enter then the same thing applies. Has anyone a fix for this?
Picture below, many thanks for your help.
JasonBack up all data before proceeding.
Launch the Font Book application and validate all fonts. You must select the fonts in order to validate them. See the built-in help and this support article for instructions. If Font Book finds any issues, resolve them.
Start up in safe mode to rebuild the font caches. Restart as usual and test.
Note: If FileVault is enabled in OS X 10.9 or earlier, or if a firmware password is set, or if the startup volume is a software RAID, you can’t start in safe mode. In that case, ask for instructions.
If you still have problems, then from the Font Book menu bar, select
File ▹ Restore Standard Fonts...
You'll be prompted to confirm, and then to enter your administrator login password.
Also note that if you deactivate or remove any built-in fonts, for instance by using a third-party font manager, the system may become unstable.
Maybe you are looking for
-
Dear All, I have trouble about "Execute Aging Report for AR" (FDI0). The aging report from period 3 (march) till period 4 (may) is different from the amount in the Customer Line Item (FBL5N), whereas it should be has the same amount, isn't it? Please
-
GR going to wrong GL account for PO Item with Account Assignment Category M
Hi Experts, I need some help on GR posting for PO Item with M as AAC. PO1 for material ABC with M as Account Assignment Category, when I book GR for this Item, the GL document generated as below. Dr: PRD (Cost Price Differences) Cr: WRX (GR/IR) The
-
Using textField input as parameter to SQL Query
Hi, Only a newbie can ask a quetion like this. I need my user to input a value in a text box, click a button and see the results of the Query displayed. I can do that if I bind a Dropdown box to a table, but since the table is huge, my page will slow
-
OS 9 Emulator no longer recognizes my printer from the chooser
I am using OS 10.4.7. I have an older version of MS Word that runs on the System 9 emulator. So far, I've been doing fine with this, but today the chooser would not let me select my printer, and so I could not print out of MS Word. I'd like to fix th
-
I purchased two online numbers with £10 credit each. after making calls with the first number my first £10 credit remained £0.04 and cannot make more calls. How can I use my £1o credit of the second number to make more call? or how can I cancel the f