Template based on Modify Provision Resource not showing existing groups

Hi All,
In OIM 11gR1, we have created custom templates based on Provision and Modify Provision Resource. For templates based on Modify Provision Resource, Oracle says that it should show all existing groups/responsibilities of the beneficiary during request creation. However, it shows empty rows during adding of new responsibilities. Has anyone faced this issue and why is this happening.
Please let us know.
Thanks.

Samique Tanweer, Hope this solutions helps you.
One possibility is, If your CSS template is common for both BI and Other department Users except LOGO, then create a single CSS template.
In your report, Take a blank cell. Insert image into it.
Now, Create a Alert based on Users and apply that alert(Rule) to above inserted image.

Similar Messages

  • OIM: Hide provisioned roles/responsibilities in the modify provisioned resource request dataset

    Hi,
    We are provisioning Oracle E-Business Suite R12 through EBS UM connector. Is there a way where we can either hide the already provisioned EBS roles/responsibilities in the available list of roles/responsibilities or move these under Selected Responsibilities and make them non-editable ? I couldn't find a way to do that in the Modify Provisioned Resource E-Business Suite Request Dataset. Please advise
    Thanking in Advance
    Abir

    1. End user raising the request is able to view the process form, I need to restrict few attributes i.e. position and responsiblity should not be visible to end userEnd user will see Application Instance Form and you can customize the UI to hide attributes
    2. Position and Responsibility should be provided by approver (this is specified in request data set of provision resource)
    Make your Java Code/Beans/Expression to show/hide attributes conditionally.
    3. As per Oracle document there is no request data set for PROVISION and MODIFY resource. What is the replacement for this?Application Instance Form
    4. After Request is raised it has been assgined to xelsysadm, how do i control the approval ?Approval Policies

  • Failed to modify provisioned resource

    Good morning, I created a template request type Self Modify Provisioned Resource and is working ok, I created a template request provisioned resource type and modify the listing when I do nothing of the resources is presented in the application. I have configured for the supervisor / manager can make requests. For example the provision resource type, its provisioning manager manages resources.
    respects

    Suppose Resource A is the name of Resource Object
    User A is the user who is provisioned into Resource A
    Verify your steps which you have executed or create a new template by following below steps:
    Resource A is provisioned to User A
    Create a template with below info
    Name as Modify
    Type as Modify Provisioned Resource
    Allowed Resources : Select your "*Resource A*"
    Set Template User Roles: Select ALL USERS, SYSTEM ADMINISTRATORS roles
    After creation of template, go and verify the Resource Information and User Roles information on created template.
    Login with XELSYSADM > Request for Others > Select Resource A > Select User A* > Next*
    Rajiv Dewan

  • To fetch process instance key for Modify Provisioned Resource while request

    Hi,
    I am trying "Self Modify Provisioned Resource" through Request and multiple resource object is assigned to the user.I have a requirement to a develop validator code to compare old data and request data and take action accordingly.How to get the Process Instance Key or OIU Key of the resource w.r.t user, so that i can compare the data entered in dataset to the data in process form and do the modify operation accordingly.
    I am working on OIM 11.1.1.5 version and have applied BP03 patch also.
    -Neha Gupta
    Edited by: 912833 on Sep 11, 2012 2:26 AM
    Edited by: 912833 on Sep 11, 2012 2:28 AM

    More or less you can use the following:
    resultGetObjects = userOperationsIntf.getObjects(plUserKey);
                int countResultGetObjects = resultGetObjects.getRowCount();
                logger.debug("CommonProvisioning.updateProcessForm Object Count = " + countResultGetObjects);
                for (int j = countResultGetObjects; --j >= 0;) {
                    resultGetObjects.goToRow(j);
                    String objName = resultGetObjects.getStringValue("Objects.Name");
                    String status = resultGetObjects .getStringValue("Objects.Object Status.Status");
                    if (resourceObjName.equalsIgnoreCase(objName) && "Provisioned".equalsIgnoreCase(status)) {
                        prntPrvsndPrsInsKey = resultGetObjects .getLongValue("Process Instance.Key");
                         break;
                }HTH,
    BB

  • PasswordField at request "Modify Provisioned Resource"

    Hi, I'm using OIM 11g R1
    I have a resource with a field Password (masked=true on the request dataset and PasswordField on the form).
    When I do a request "Modify Provisioned Resource" without modify the field Password and modifiing just an other field, the request send the value "********" on the password field and this call the task "Passowd Updated".
    How I fix it?
    TKS

    This is the code of my ModifyValidation plugin:
                                for (RequestBeneficiaryEntityAttribute attribute :
                                     requestBeneficiaryEntityAttributes) {
                                    if (attribute.getName().equals("Login")) {
                                        String requestLogin = (String)attribute.getValue();
                                        validateLogin(requestLogin);
                                    } else if (attribute.getName().equals("Password")) {
                                        String requestPassword = (String)attribute.getValue(); // Here, if I don't change the Password field, I get the value "********" instead of the old value of the password field
                                        validatePassword(requestPassword);
    And if the request send the value "********" on the password field and this call the task "Passowd Updated" with this value...
    I put que attribute masked="false" at this field on request Dataset and when I open the request, the field value already is "*********" and the value of the password field was "12121212".
    Tks

  • Windows based WD external hard drive not showing up in Disk Utility to reformat to Mac... how can I erase the drive

    We have a WD external harddrive previously used with a PC that we want to completely erase and reformat for use with our iMac desktop for use with Time Machine.  The drive shows up on the desktop of the Mac, but it does not show up in Disk Utlity, assuming because it's Windows format.  Outside of the standard "erase" feature in Disk Utility, is there any way to reformat this drive for Mac OS X?  Or how can I get this drive to show up in Disk Utility?  Note: The drive functions properly, has power, and we are able to view its current contents through the desktop icon, so it is a working drive.  And we are ok with losing all the current data on the drive.

    Hmm strange, I had just moved my external Lacie drive from my windows machine to my iMac and it was showing up in disk utility still formatted fat32 or whatever. I would disconnect the drive and restart the machine then replug the drive and try again.
    Also not that it will make a difference ( I dont think it will but hey why not ) try accessing disk utility from the install disk?

  • Document is not showing up group currency  in the GL line item display

    Greetings,
    Could you please advice me as to why document is not showing up the group currency in the line item disply,  when all other document posted to that GL are showing it.
    Your prompt reply will be appreciated.

    Hi
    select screen layout and copy gorup currency field.
    Hope it will work
    Regards
    Murali

  • Credit account is not showing the group customers credit exposure

    Hi Exports,
    I have an issue where in grouped some customer for credit control. Here say i have taken xxx1 customer as master customer for credit control so that customer xxx1 will carry the credit limits for customers xxx2, xxx3 and xxx4 and i have assigned credit account xxx1 to all customers. If i check customers credit accout in FD32 (status tab) of customer xxx1 it
    is showing zero credit exposure for all the customers though the Sales transaction are happened with all customer.
    Note: I am using update group 000015 (delivery level) and dynamic check.
    Please can u explain me what could be the reason.
    Thanks,
    Swamy H P

    Hi,
    When you use Update group 000015, the system will update only the values of open deliveries and billing documents. It will not consider the Sales orders in FD32 .
    So you have to change the update group 000012.
    Regards
    M. Lakshmi Narasimhan
    Edited by: Lakshmi Narasimhan M on Apr 26, 2010 6:48 PM

  • FCTR calculations not showing in Group currency after SPRUNConversion

    Hi,
    We are working on legal consolidation. We are following a two step process, in the first step the LC is getting converted into Reporting Curencies and the FCTR differences are being calculated and stored in defined FCTR accounts through script logic.
    In the second step we are converting the Reporting currencies into a Group Currency using SPRUNconversion. After this step all the RC's are getting into GC except the FCTR accounts. We have checked the properties of these accounts (Ratetype etc) and they are all properly set. The values of FCTR in reporting currencies are also getting deleted. Any help on why this is happening.
    Thanks,
    Prasanth.

    Hi Abhinav,
    Its not mandatory to follow a two step process, we are doing so because of clients requirement.
    Usually the standard currencies you want to use for reporting are marked as 'R'. To use a Group currency define a group in your currency dimension and mark that currency_type as 'G' and give it a currency (usually one of the reporting currencies).
    You can then run SPRUNConversion with the third parameter (currency) blank and run it once again with the Groups name that you defined as GC. This will show your LC values in reporting currencies and Group currencies.
    Thanks,
    Prasanth.

  • FS00 Does not show account group .

    Hi ,
      in FS00 , when I try to create G/L account , the list for account group is not populated.
      How Do I check where it is missing ?
    Thanks,
    Chitta

    hi,
    create a company code wise g/l  FS00 centrally
    before u Matain  this steps
    1. Edit chart of accounts  T.Code  ( OB13 )
    2. Assign Chart of accounts          ( OB62 )
    3. Define Account Groups              ( OBD4)
    4. Retained earings account           ( OB53)
    5. Matain Field status group           ( OBc4)
    6. Assign field status group             ( OBC5)
    All basic setting fulifill than go to g/l creation
    this steps more helpful u
    regards,
    ramu.

  • Web Service in Document Template Designer not showing

    Hi,
    I'm trying to create a new document template but the dropdown list is not showing any results even though we have web services that are active and productive.
    If I enter the name manually I am getting a "Please enter a valid Service definition name" error message.
    Has anybody seen this issue before?
    Thanks
    Gregor

    Hi,
    I was also getting same error once...However i was able to see my web service definition in F4. Selecting from F4 list was working fine but if i entered the name mannually, i was getting the same message as you got...may be its a Bug..
    Just to assist you, Have to activated the webservice from SICF before going for deployment using template or Adobe ?
    Just check if you have maintained the webservice in SICF.
    Thanks & Regards,
    Suchita

  • Firefox does not show Flash based Soundcloudplayer after embedding

    Hi There,
    I have some problems with embedding from flash based content because firefox does not show the embedded content.
    Last week and the time before everything went fine but now the Flash based player of Soundcloud doesn't work anymore.
    I've tried to embed my soundcloudplayers via div tag on my nobleprofile, full code:
    <pre><nowiki><div>
    <object width="390" height="220" type="application/ x-shockwave-flash" data="http://player.soundcloud.com/player.swf?url=http%3A%2F%2Fsoundcloud.com%2Fmanuel-turobin%2Fsets%2Fmanuel-turobin-fancy-a-swift-one-before-the-show&amp;show_comments=true&amp;auto_play=false&amp;show_playcount=true&amp;show_artwork=true&amp;color=c0ff00">
    <param name="movie" value="http://player.soundcloud.com/player.swf?url=http%3A%2F%2Fsoundcloud.com%2Fmanuel-turobin%2Fsets%2Fmanuel-turobin-fancy-a-swift-one-before-the-show&amp;show_comments=true&amp;auto_play=false&amp;show_playcount=true&amp;show_artwork=true&amp;color=c0ff00" />
    <param name="wmode" value="transparent" />
    <param name="allowFullScreen" value="true" />
    <param name="allowscriptaccess" value="always" />
    </object>
    </div>
    </nowiki></pre>
    If I use the "data" URL I can see the player but I dont know why there are problems for a week with that embedding?!
    Thanks for any help!

    I notice a space in type="application/ x-shockwave-flash" in not working flash objects.
    Firefox also needs the movie name specified via a data attribute in the object tag instead of via the param tag. With those changes applied you should see the Flash animations (works for me).
    <pre><nowiki><object data="http://www.residentadvisor.net/flash/dj-widget/dj.swf"
    type="application/x-shockwave-flash" width="390" height="454"></nowiki></pre>

  • Setting a New Default "Output To" Template in the Render Que Does Not Work

    I'm trying to change the default "Output To" template in the Render Que to not show the timecode for a PSD file, but when I change the default template by clicking on "Custom" from the dropdown menu and using the checkbox to set a preset as the default in the "File Name and Location Template", nothing changes.  The next PSD item I add to the render que still uses the previous template (i.e. it adds the Frame) and doesn't honor the new default I just set.
    Just submitted a bug report, as well.
    Using AE 2014.1.1 (13.1.1.3)
    Windows 8.1 Pro

    I'm not surprised either of you is having problems creating a new output module and making it the default.  That's not where you do it.
    Go to Edit>Templates>Output Module.  Make a new one.  Select one to use as a default.  Select a different one if you want a different default.  You can have a default for both stills and movies.  You can do the same thing for Render Settings.  It's the same basic drill.
    Since this is basic AE 101-type stuff, I bet you'd get a lot out of these how-to's from the pros:
    Getting started with After Effects (CS4, CS5, CS5.5,  CS6, & CC)

  • Photos not showing up in 'blog' list of entries?

    I've customized my blog entry pages, so the positioning of the photo has been altered ... but I'm still using the 'mask' (that was the placeholder for the still in the original template). But the picture is not showing up automatically in the Entries 'list'.
    In the 'Blog summary' pop-up menu the 'show photos' box is clicked on, and the size adjustment set to larger than 'o'. But I don't see a pic in the appropriate place in the list.
    I'm wondering what I might have done when customizing the page to make the picture no longer appear in the list?

    Bonjour
    You may have an issue with the image placeholder in the entry. Never remove the placeholder, even for a "cut-paste". If you cut-paste the image in this placeholder, you will have even the tooltilps "this is placeholder, drag a new media here to replace it" and it seems to be ok but it's wrong, you won't have an image in the blog summary of the blog main page anymore. So you will have to rebuild your entry from scratch.
    Be careful if your duplicate the placeholder, only the original one works properly. Never delete it.

  • Groups and users are not showing up in Hyperion workspace

    Hi There
    I am having problem with the workspace when trying to give access to reports.Problem is its not showing up groups and users in workspace.But when i tried logging to shared services its showing up all the groups and users.Its trying to communicate with native directory but not with the openldap.
    Please help me.
    Thanks
    Harsha.

    Hi,
    Have you provisioned the users/groups in shared services with the correct Reporting & Analysis roles?
    Cheers
    John
    http://john-goodwin.blogspot.com/

Maybe you are looking for

  • Can I run a CD off a tethered computer?

    My CD drive broke on my G4 and I need to install the printer driver of my new printer. I often connect my iBook G4 to my desktop G4 via firewire, though a CD in the iBook doesn't mount when connected. Is there any other way to run the install CD with

  • Urgent : Auto Clear Down Pyament with Vendor IV and Customer Billing

    Dear friends, I have problem about how to set the vendor invoice clear with down payment agianst PO automatically. BTW, customer billing how could be cleared automatically with down payment please give me suggesstion. Thank for all of your help.

  • Sending HTML email with SO_DOCUMENT_SEND_API1

    Hi all, I have implemented a function module to send HTML emails with SO_DOCUMENT_SEND_API1. It works fine, but in every email I have at the end a CRLF which looks not very nice in MS Outlook. It seems that this will be added to every email in additi

  • Interface of SAP with Golden Tax, China

    Hi Does anyone have some documentation regarding the SAP interface with the Golden Tax, China system( chinese local tax software system) and any documentation relating to SAP, China local implementation in ECC 6.0 Thanks Krishna

  • Troubled with Slow Windows Bootup

    I have IMAC 21.5. bootcamp 3.2 windows 7 64 bit 10.5 Snow Leopard I have set default booting on windows. but when i switch on my imac it normally takes more than 2 minutes in booting windows. It starts with a cursor blink on left top corner of screen