Template Drop Zone

Let's say your adding data to a template. The template has two drop zones (square box with arrow).
You have added the text in the appropriate text fields but you do not want to add any content (photo/video/whatever) to the drop zones.
*However, the drop zones remain in the template which of course you do not want to see in the final canvas.*
How (if possible) can you eliminate the drop zones entirely from the template. Can it be done in FCP (control/filter/motion tabs) or do you need to round trip the template to Motion and back for you to eliminate the drop zone boxes from your template?
Thanks
Dan

Tom
I was meaning templates found in the 'Effects' tab in the FCP browser.
At any rate, I know what you mean about removing them in Motion, Tom.
As a side note : I just dragged some freeze frames into the drop zones. I figured: why not?
Sometimes you just want a totally minimalist look. And I love deleting things to get to that level.
My living space looks that way. Spare, clean, cold, white. A major turn off for many.
Anyway, I like my video projects to look the same way.
.....but I digress.
Dan

Similar Messages

Master Template Drop Zone Causes Frame Offset Problem

I created a template in Motion with two drop zones. When I use it in Final Cut as a master template, and drop in two video clips, the clips are offset about 4 frames from the originals. I can see this when I toggle the template's track on and off to see the underlying clips that got dropped in from my timeline. The cut points don't match up to what winds up in the template's dropzones for some reason.
This is a problem, because I'm using the template as a transition between full screen and a PIP-type effect.
The weird frame offset causes a visual glitch that I have to correct by adjusting the start/end points. This is extremely time consuming, as I have to apply the template to a huge number of clips.
I'm using the latest version of Final Cut Studio.

Just discovered that the frame offset increases the further I am into a clip.
I took a part from the beginning.. frame offset = 2 frames.
Took one closer to the end of a 4 minute clip.. frame offset = 14 frames.
The video is encoded in ProRes422 at 29.97 fps, and the Motion template is 29.97 also. Any ideas?

Moving Still Graphics in Motion Template: Drop Zones

I am new to this and it is probably a simple answer. I have a portrait JPG photo to add to a drop zone in a template. How do I adjust the photo only so that it will not cut off the top of the photo. I am using fit in the image properties. It works with stretch but that option distorts the photo and centre makes the photo selection even smaller within the drop zone. The photo is quite large. Do I have to reduce it's size first?
If I move the photo down with the selection tool it does not allow me to move the photo down without cutting off the rest of the photo outside the drop zone box. All I want to do is move the photo down so it fits within the drop zone so that I can see the bride and groom.

hi,
what is the aspect ratio of the drop zone? if it doesnt match your photo then you are going to have to compromise on something. You might lose some picture either at the sides or top and bottom, or maybe you see some blank around the picure.
As Patrick says its a waste of power having a large picture if you are going to reduce its size and pop it in a frame. Further to this you might want to preflight your image to be the right ratio for your drop zone.
Hope this helps
adam

Can i backtime a clip into a template drop zone?

trying to use a transition template but when i drop the clip into the outgoing clip's drop zone well it goes in from an in point which makes aligning the transition with it's ingoing and outgoing clips a major pain in the ***. Ideally I'd like to just back time the outgoing clip. Can i do this? any other workaround suggestions?
thanks

thanks. i'm not sure if i did exactly what you meant, but i found a pretty good workaround. I put a marker in the template where the new clip starts, then i line that marker up with the edit point between the clips, giving me the ins and outs as you said.
cheers

Putting video clips in template drop zone

I can't drag my video into the control video drop zone. the computer won't let me drag the video clip anywhere...what could be limiting my ability to do this?

Are you working in FCP or Motion? If FCP, are you working with one of the Motion Master Templates? Also, what is the source of your video and what are it's settings?
-DH

Apple motion 5 template drop zones play only 1080p video clips. 720p will play outside of dropzone.

I am also getting a -1 error when trying to export with the 720p clip in a dropzone. I bought the clip stock and they didn't offer this one in 1080p. Is there any explanation as to why this clip will not run in the dropzone but does on the canvas?

You shouldn't be "loading" drop zones in Motion. You should be doing that in FCPX (as long as the drop zone source well is published.) You do not have to use Motion to "bake" video for import into FCPX. Install the template for FCPX [ place the effect folder in ~/yourHomeFolder/Movies/Motion Templates/<TypeOfEffect>/<CategoryFolder - create a new one if you want>/<place effect folder here> ]
The types of effects are Effects, Titles, Generators, Transitions.
The effect you bought came in a folder. That folder structure must be maintained for FCPX. That usually means: a Motion document (.moef, .moti, .motr or .motn file), 2 .pngs and a Media folder. If any of these are missing, it will not work in FCPX.
To use the drop zone in FCPX, apply the effect to the clip (or if it is a Title, place the title over the storyline); click on the Drop Zone source well, then click on the clip you want to apply to the drop zone from either the Event browser or the storyline. You'll see a "2-up" display, and you should see an "Accept" button in the viewer to finalize the application to the drop zone.
If you have the same problems in FCPX, let us know!

Motion 3 template drop zone content won't play in FCP

I am new to Motion. I made a custom template and brought it into FCP. It inserts and previews fine. In FCP I place a clip into one of the masked-out "drop zones" under the "controls tab" and here is where I run into the problem:
The clip shows up ok in the template but doesn't play once I render; all I get is a static still from it.
I sense that I am almost there... any suggestions?
many thanks,
Alan
intel iMac, G4 Powerbook Mac OS X (10.4.9)

Hi, this problem has been solved over in the Quicktime discussions:
http://discussions.apple.com/thread.jspa?messageID=5106282&#5106282
Turns out you need to install Qmaster to play HDV files in QT (without FCP installed).

How to remove iDVD Template Drop Zones?

Hi! I'm looking to remove all drop zones from iDVD to have a simple black background that could be replaced with a .mov file.
Essentially, I'd like to remove the 3 drop zones from the "Modern" 7.0 theme.
Please let me know if this is possible, thanks!
Alex

This is from iDVD Help: _Adding or hiding drop zones_
The drop zones in a theme are a permanent part of the graphics or animations included in that theme. Therefore, you can’t add drop zones, delete individual drop zones, or change the location of drop zones on a menu. You can, however, hide all the drop zones on a menu so that they don’t appear in your final project. This is particularly helpful when you want to create a simple custom theme.
To hide all drop zones on a menu screen:
Make sure the menu whose drop zones you want to hide is showing in the iDVD window.
With your pointer over the menu, press Command-I to open the Menu Info window.
Deselect the “Show drop zones and related graphics” checkbox.
The drop zones immediately disappear from the menu, and they do not appear in your final burned project. Some other graphical elements may also be hidden.
You can always show the drop zones and ornaments again after you’ve hidden them. Simply open the Menu Info window and select the “Show drop zones and related graphics” checkbox.
To replace the background, open the menu info window. For full directions, go to iDVD Help, and look up _Changing the background image of a DVD menu_.
I hope this helps.

MOTION 3 - adding photos to template drop zones.

Is there a tutorial on adding photos to the drop zones? New to Motion.
Do I import the photos first? Thanks.

There is a tutorial on dropzones on my You Tube channel. Here's a link:
[Drop Zone Tutorial|http://www.youtube.com/watch?v=Kx4wn82jVLw]
Andy
PS: I may receive compensation for my recommendation or link.

Drop Zone Image Parameters

Does anybody know how to find out the image parameters for any given menu template drop zone?
I am finding that some jpgs I use are getting cut off and in only showing half of it. I read that in iDVD 08 the resizing option was removed so if I could get the height x length dimensions needed would at least be a help until apple fixes this.
Note I am on a Mac Pro with iLife 08
Message was edited by: weaponx88

Take a look at these links if you haven't already:
http://discussions.apple.com/thread.jspa?messageID=8082366&#8082366
http://discussions.apple.com/thread.jspa?messageID=7855744&#7855744

How to add more than one clip to a drop zone? New guy

Hey all, I'm new to DVD studio and I'm trying to fiqure out how to add more than one clip to a Template drop zone. I'm using a 6 button template. I've named each button .. Football, Baseball, Hockey ...etc.
How can put in MORE THAN ONE CLIP in the Football track/drop zone. So when someone clicks on Football they can see 3 examples.
Do I need to create something to link to that Football button?
Any replies appreciated

You can edit the segments to be used in FCP or Motion so that the asset drop in has three examples
Another way (if you want) is to make the entire menu outside of DVD SP so that the background layer is an m2v and the items are revealed/masked to some degree
Take a look towards the bottom of this thread http://discussions.apple.com/thread.jspa?messageID=2951183&#2951183 where I discuss http://www.dvdstepbystep.com/Overmovies.zip
Note that you can also use a basic overlay to do this. The overlay would be just solid black instead of the arrows/circles things I use in that example.
For instance make the text one color and the box over the movie another (You can make it blue and the box red lets say) Draw a region over both for the button. Map blue for highlights/transparencies for normall/selected/activated and the same for the Box

Drop zone of loop in the film stip template, works in simultor, not burning

Droping a loop from the film into the drop some in a chapter menu and it shows up on the simulator. when I go to burn or build etc there is just white where the loop should be. everything else is workinng fine just but no loop- any ideas out there?
thnx

OK bigger problem- the all NTSC DVD that used the same template [film strip] also had no problem in the simulator, but I just build/formated it, and the drop zones in the menu buttons whent all white again- same as yesterday. I also checked and they were all software based in the menu prefs. something is wrong here, there is like a "flash frame" of the first frame of the loop, frozen for a split second. and then when the motion starts it all goes to white in zone. I am really flumixed here, did I change something in the targets or is it still burn realted? but why does it work in the simulator, like a charm and then it does not burn????? FRUSTRATED

How do I get pics into Drop Zones for Templates?

I am having a problem that is probably simple, but for the life of me, I can't figure it out. I opened a templated in Motion and noticed that some of the templates have drop zones, a la iDVD.
Okay, so I found some pics in the browser but when I went to drag them into the drop zone, the image did not go into into the drop zone, and instead a new layer was created. I've tried this countless times and can't seem to gt the pictures to go in the drop zones.
Am I doing anything wrong?

The problem is one of interpretation. What you are seeing are grey "replace media" items which need to be replaced with what you want. They aren't 'drop zones' ala IDVD or DVDSP (basically it's an image with a mask or overlay over it giving it that 'drop zone' look)
There are many ways of changing/replacing the "media" items (this is Apple after all ;):
1) If you press F5, you open up the "Layers/Media/Audio" window. Click "Media" and you'll see all the elements used to make up the template, including "replace 1.jpg" etc.
2)Click on one of the "replace" files. Then click the "Inspector" tab in the Browser window. Then you'll see a window that says "Linked Objects." and below that "replace media file." Click "Replace media File" and then choose the file you want to insert/replace (you'll have to de-select "Show Matching Names Only" to be able to replace it with your own file)
OR:
1) press F6 and open the Timeline window.
2) Scroll down and you will see a layer called "Replace"
3) Open up that layer (click the triangle) and you will see Replace 1, Replace 2, etc (depends on your template)
4) Drag the image you want to insert/replace into the template to the sublayer called "replace 1" etc.
There are other ways, but these two are the most 'stable' I have found.

Drop Zones in DVDSP menu templates

I like to occasionally use the menu templates that come with DVDSP. One thing that frustrates me is the quality of the playback video in the Drop Zone of the template. The image has a somewhat jagged/blocky look to it. It is not as smooth and clear as the original m2v file. Is this an encoding problem? What can I do to correct this situation.
The original work is done in FCP5 and then encoded to m2v using the Quicktime Conversion options. I usually chose the settings for a 6 bit target rate with a 7 max, one time VBR, and "Better" motion detection.

What David said - any footage on a menu that includes other shapes or items from the palette will get encoded to MPEG2. If you have already used MPEG2 as the source footage then DVDSP will pass it through another enocde process, and you will lose quality... your best bet therefore is to use .mov files in this case.

MOTION 4 - I can't locate correct drop zones for template

I'm working in MOTION 4 and a template I purchased online.
I'm not deeply experienced with MOTION (one of the reasons I prefer
templates), but I have used built-in MOTION templates and those from 3rd parites
and other sources on many prior occassions. I'm familiar with dragging
the elements you want to customice into the drop zones.
The problem I'm having is with a Calendar template. I've been
playing for hours now trying to get
the video or image into the drop zone. For instance this template is
made of of a bottom part
that shows a January calendar, and the top of the calendar is the drop
zone where you drop in
the picture you want to customize to represent January. And there is a
counterpart for all 12 months and it flips through all 12 months.
No matter how hard I try, I can't drag my images into the right area of
MOTION Canvas or layers area to get it into the right
drop zone corresponding to the month I'm shooting for.
This seems straight forward, but the template is confusing. I've tried
trial and error for hours now, but they're not
ending up where I need.
Is there someway to see ONLY the drop zones in MOTION? I keep replacing things
I don't intend.
Any quick assistance would be appreciated. I've contacted the 3rd party I purchased the template
from but haven't heard back yet and on deadline. Help!

ichbinesderelch wrote:have you tried using xrandr? xrandr -q shows available outputs, xrandr --output outputadapter(like VGA) --mode 1280x1024, as far as i can see, virtual monitor is set high enough that this should kinda work!
Yes, I tried xrandr:
$ xrandr --newmode "1280x1024" 65.0 1024 1048 1184 1344 768 771 777 806 -vsync -hsync
$ xrandr --addmode VGA 1280x1024
$ xrandr --output VGA --mode 1280x1024
$ xrandr --output VGA --right-of LVDS
At first this didn't work at all, so I tried to mess with screen resolution applet and got output on the second monitor, but not at the desired resolution.
I tried running these commands again and got output on the second monitor, but at the wrong resolution. The strange part is that the resolution I want is listed by xrandr:
$ xrandr -q
Screen 0: minimum 320 x 200, current 2304 x 800, maximum 2560 x 2048
VGA connected 1024x768+1280+0 (normal left inverted right x axis y axis) 0mm x 0mm
1280x800@60 60.0 +
1360x768 59.8
1024x768 60.0*
800x600 60.3 56.2
640x480 59.9
1280x1024 60.0
LVDS connected 1280x800+0+0 (normal left inverted right x axis y axis) 0mm x 0mm
1280x800 60.0*+
1024x768 85.0 75.0 70.1 60.0
832x624 74.6
800x600 85.1 72.2 75.0 60.3 56.2
640x480 85.0 72.8 75.0 59.9
720x400 85.0
640x400 85.1
640x350 85.1
TV disconnected (normal left inverted right x axis y axis)

Template Drop Zone

Similar Messages

Maybe you are looking for