Template for 5.5 x 8.5 200 page book

Is there a template for a 5.5 x 8.5 book of about 200 pages?

Mary,
You really have no business trying to make a book without some actual experience and training. I expect, though, that some of the online book publishers would have templates for that size that fit their workflows, and you can always google for something to see what comes up.
You can open a legacy file in a newer version, but I would advise against doing that, too, both because it will no longer be editable in the older version after you save it (should you want to send it back to the original designer) and because there are likely to be text re-flow issues you may not notice. New versions have different text engines and the text flows differently form older versions, but it will not affect existing text until you touch it in some way, then you can wind up with changes to page endings and oversets at the ends of stories, or chapters that start on the wrong page. There are also sufficient reports of directly converted legacy files suddenly going corrupt fro no apparent reason that I no longer convert except from .idml or .inx, which you would need to get from your original designer.
I can't really tell you how to fix errors unless I know what sort of errors these might be, and again, I suspect you probably should not be doing this yourself if you need to ask this question.

Similar Messages

  • Same template for more than 8 regions in a page

    anyboday can explain how to apply same template for more than 8 regions in a page ?

    Hello,
    You should be able to apply the same template to any number of regions on the page. There is no constraint.
    Carl

  • New to InDesign: things I need to know before starting my 200-page book?

    Hi there (second time attempting to post this; sorry if both somehow end up on the discussion page—this version is my most recent)—
    I'd practically completed a 180-page cookbook—lots of photos and recipes, instructions and comments—in Apple Pages ('cause I'm on a Mac and Pages seemed pretty straightforward) when I realized that not being able to see the book in a facing-pages view was completely ridiculous.  So I'm trying InDesign, and already I can see that this is THE app for what I'm doing.  I purchased a hard copy of the InDesign Classroom in a Book 2014 book, which I'm slowly going through... but I'm so incredibly eager and going page by page is so slow.  I will keep going through the book, but in the meantime, would people on this forum mind making sure I'm starting off on the right foot?  (I don’t want to get too far along and then discover that I should have been doing things completely differently).
    Question One:  Many of my pages will be for recipes, of course—name of the dish at the top (white text on a black background), photo below, and below that the list of ingredients and the instructions.  So should I create a Master Page just for recipes?  That would seem to make sense, as all of the recipes will be organized on the page in the same way.  But what about all the other parts of the book (Preface, Table of Contents, various pages of commentary, pages of photos, etc.) that are different from one another?
    Should I create other Master Pages for other parts of the book?
    Question Two:  given that I’m planning to have all the pages printed at a printing house, and then bound into book form… should all my ‘left-hand’ Master Pages leave an extra wide margin on the right (to account for the part of the page that’s bound/glued) and, similarly, should all my right-hand Master Pages leave extra room on the left?  How much extra room do I need for this? 
    Question Three:  I really don't know enough about InDesign to even know what other question to ask, so maybe I'm safest to ask this:  are there settings I should 'build in' now, so I don't find myself trying to do it later, when it's much more difficult?  As I say, I'm going to keep struggling with the book (so many lessons seem to have nothing to do with my particular project, but I know I have to keep plugging away).  I do want to get my cookbook off on the right foot though.
    Thanks so much for any advice,
    Malcolm

    Presumable the book will be divided into sections (chapters) to make it more accessible. (1) front matter – title page, imprint/copyright, TOC etc. these tend not to have pages numbers (2) Individual chapters – e.g. Starters, Main courses, Puddings, Drinks  (3) back matter e.g Index.
    The simplest approach is to have page numbers on your master page with running headers – that is the name of the book at the top of the left hand page and the name of each chapter on the right hand page, and guides for the repeating elements.
    Produce and print out a couple of specimen pages of the recipe pages to see how your design looks and how easy it is read/use and how you will allow in the design for short and long menu headings and recipes etc. Use paragraph, character and object styles in your design. You wouldn't need extra space for perfect binding, look at similar books of the same trimmed pages size to see what kind of margins they have.
    The cover artwork should be produced as a separate document as it will be printed separately on heavier stock.
    Check you have an economical page size for printing (talk to your printer) discuss the paper you might choose and how many pages in a printed section. Also what kind of PDF s/he wants.

  • Reseting page number in Word RTF template for BI Publisher PDF generation

    Hi!
    Apex 4.0.2, Oracle 10.2.0.4, BIP 10.2
    Bills are created based on Word RTF file with BI Publisher. Reszulting file is one big PDF file, which has many pages.
    Word RTF template is grouped on BILLS.ID field with page break option. So one BILLS.ID may have one or many pages (according data).
    How to create RTF template (for PDF BI Publisher generation) with reseting page numbers when grouping value change.
    Page numbers are in footer in format
    curr_group_page/total_group_pages
    where:
    curr_group_page is current page number in group (defined with BILLS.ID field),
    total_group_pages is total page number of pages in group (defined with BILLS.ID field).
    I need to reset numbering whenever BILLS.ID (group) change.
    Example:
    ID=1 (4 pages)
    1/4, 2/4, 3/4, 4/4
    ID=2 (1 pages)
    1/1
    ID=3 (2 pages)
    1/2, 2/2
    ID=4 (3 pages)
    1/3, 2/3, 3/3
    etc.
    How to achieve that kind of numbering?
    Any help appreciated.
    Regards,
    Damir Vadas
    Edited by: Damir Vadas on May 16, 2011 12:49 PM

    Simple question.. Does your posting deal with an APEX issue or a BI Publisher issue? The posting you have deals with the RTF add-on for Word that builds report layouts for BI Publisher. I suggested in my response that you move it to a more relevant forum..
    If you feel that me alerting you to the fact your are VIOLATING forum policy is an issue, please feel free to ask others their view.. (posting to a 3 year old closed thread, creating MULTIPLE threads for a single issue..) You do NOT seem to get the idea that posting this in the Bi Publisher support forum would probably get you a BETTER response than here.. Asking pl/sql questions here will also get people to refer your questions to the PL/Sql Support forum..
    Also, here is a POSSIBLE answer from the BI Publisher Forum: http://forums.oracle.com/forums/thread.jspa?threadID=594805
    This Is The APEX SUPPORT forum, we deal with SUPPORT questions on APEX (Application Express)..
    Thank you,
    Tony Miller
    Webster, TX
    You know, I used to think that it was awful that life was so unfair. Then I thought, wouldn't it be much worse if life were fair, and all the terrible things that happen to us come because we actually deserve them? So, now I take great comfort in the general hostility and unfairness of the universe.
    If this question is answered, please mark the thread as closed and assign points where earned..

  • Managed property value is not returned in item template for ArticleStartDateOWSDATE

    Environment: SharePoint 2013 online
    Related parts: Search Result web part (OOB), Display template for search result items
    Base type: article page
    I have a search result page, it has a search result web part on it, for the display template, it is using a default for list, using  "single template to display items" option to point to a custom item template.
    The search returns list of articles, just title and abstract, it works fine. 
    We need to add "Article Date" to be displayed. "Article Date" is a OOB site column under "Publishing Columns".
    I found its field name is ArticleStartDate, then from search schema, I found the corresponding managed property name is "ArticleStartDateOWSDATE", the mapped crawled property is "ows_q_DATE_ArticleStartDate".
    In order to display it, I added managed property mapping to the item template to map to ArticleStartDateOWSDATE.
    The code is like,
    <mso:ManagedPropertyMapping msdt:dt="string">&#39;Title&#39;:&#39;Title&#39;,&#39;,&#39;MyArticleStartDate&#39;:&#39;ArticleStartDateOWSDATE&#39;</mso:ManagedPropertyMapping>
    var ArticleDate = $getItemValue(ctx, "MyArticleStartDate");
    The value of variable (ArticleDate) is empty when try to display it.
    Please let me know if you re-create this issue or have a solution to display the value. 
    BTW, on "Content search" web part, I can map ArticleStartDateOWSDATE to "Line 3", and display its value. So I know the managed property itself should be fine.
    Thanks in advance,
    John
    John Architect

    I think your input value is wrong,, when I did HTML decode of your Managed properties :
    &#39;Title&#39;:&#39;Title&#39;,&#39;,&#39;MyArticleStartDate&#39;:&#39;ArticleStartDateOWSDATE&#39;
    It gives :
    'Title':'Title',','MyArticleStartDate':'ArticleStartDateOWSDATE'
    i.e. wrong, if you see there is extra comma in between.
    try giving :
    &#39;Title&#39;:&#39;Title&#39;,&#39;MyArticleStartDate&#39;:&#39;ArticleStartDateOWSDATE&#39;
    or directly 'Title':'Title','MyArticleStartDate':'ArticleStartDateOWSDATE'
    get2pallav
    Please click "Propose As Answer" if this post solves your problem or "Vote As Helpful" if this post has been useful to you.

  • Which is better: strct or unstrct fm for docs 200 pages

    Background:
    there is discussion in my department regarding merits of working in structured vs unstructured for large docs, say over 150 - 200 pages; specifically, a new set of docs for Project X is coming through that will be worked on mainly by people Not familiar with strct fm, which means definite ramp-up time
    I've been working in strct fm for about a year however my docs are typically only about 60 pages long. I'm a proponent of working in structured fm however am not going to be on Project X
    two of the Project X team are familiar with strct fm. They are strongly recommending staying in unstructured. Their reasons include ramp up time for new writers and issues regarding working with imported table content (assigning paragraph tags to each entry, etc.)
    Would really like to hear experiences of people who use structured FM for long docs as I can only speak to ease of use in shorter-sized documents.
    Would like to hear advisability of staying in unstructured or not...Please advise.
    Thanks!

    I routinely edit structured books that are several hundred pages long (and
    set up applications for people in varying environments to do so). I have
    edited single structured files as long as 1400+ pages. I use structured
    FrameMaker for almost everything I write, even single-page letters.
    Reasons often given for use of structure include:
    1) Satisfying a requirement for XML delivery
    2) Promoting consistency across a document set and within a document
    3) Enforcing some of an organization's writing standards(such as requiring
    an introductory paragraph before a figure or prohibiting lists with a
    single item)
    4) Allowing access to various XML tools
    In addition, a properly designed structured environment simplifies many
    every day editing tasks (some of which Van has already enumerated in this
    thread). Some others are listed in
    http://www.txstruct.com/papers/FrameUsers02.productivity.pdf.
    Are the Project X writers already familiar with FrameMaker? If so, it
    shouldn't take more than about a day for them to learn how to work with
    structured documents. (Feel free to contact me off-list for information on
    a self-study course on structured editing for users with are familiar with
    the original FrameMaker user interface.)
    The other concern you mention is assigning paragraph formats to cells in
    imported tables. How are the tables created? How are they imported into
    FrameMaker? Are they dynamically updated or is the content static once they
    are inserted into the FrameMaker documents? Maintaining the formatting
    within tables should be no more difficult in structured FrameMaker than it
    is in unstructured FrameMaker. Formatting options may be specified in
    attributes rather than paragraph/table formats, but the same table
    capability is available in both user interfaces. Depending on how the
    tables are created, in fact, using XML and XSLT along with a structured
    environment may make it easier to move the data into FrameMaker.
             --Lynne
    Lynne A. Price
    Text Structure Consulting, Inc.
    Specializing in structured FrameMaker consulting, application development,
    and training
    [email protected]            http://www.txstruct.com
    voice/fax: (510) 583-1505      cell phone: (510) 421-2284

  • HELP! I've created a template for event badges and have been instructed by the client to insert the (200 ) names and relevant companies into it...Is there a script that can do this in illustrator? Should I be using Indesign?

    An events client I'm working for have asked me to create a template for badges. Rather than ask the printers to insert the names and companies of the individuals present at the event though, they want me to create all of the pdf files for (200+) people!
    I have an excel sheet of the people that will be present. My question is: is there a way to automate this? to define editable areas in a template and run some sort of batch processing script?
    Thanks!

    This would be a perfect job for Data Merge in InDesign. You can place your AI design into InDesign (minus the text fields), and then easily create a merge.

  • Update content type template for existing sites in sharepoint 2010 ?

    Hi,
    I created one custom document library (list definition) and associated 3 content types which has docment template path (\_layouts.template1.docx). I rollout nearly 200 sites with this definition. now i want to update my document template and also i want
    to change template docx to dotx.
    what is the best approach to apply these changes for existing sites ?
    Thanks,
    Surya.
    suryakumarp

    Hi suryakumar,
    As I understand, you want to update the template 
    for existed content type.
    It can be achieved by programming. There is a
    SPContentType.DocumentTemplateUrl Property, which can be used to update content type.
    Here is a demo:
    http://officepoint.blogspot.com/2008/06/sharepoint-relink-infopath-forms-relink.html

  • Template for G\L account opening balance

    Hi
    which is the DTW template for importing G\L account and BP
    opening balance.
    Are there any default columns that need to be set ?
    Regards
    swapnil

    I am using :
    in header:
    RecordKey     JdtNum     AutoVAT     DueDate     Indicator     Memo     ProjectCode     Reference2     ReferenceDate     Reference     Series     StampTax     StornoDate     TaxDate
    1          tNO     20070207          Transaksi 1                              tNO          20070207
    2          tNO     20070207          Transaksi 2                              tNO          20070207
    3          tNO     20070207          Transaksi 3                              tNO          20070207
    and in line:
    RecordKey     LineNum     AccountCode     AdditionalReference     BaseSum     ContraAccount     CostingCode     Credit     Debit
    1     0     130010               161010          1000     
    1     1     161010               130010               1000
    2     0     133000               161010          200     
    2     1     161010               133000               200
    3     0     130110               161015          500     
    3     1     161015               130110               500
    Rgds,

  • How to create a Pages book template (w T.Box, table) for continuous text ?

    I am new to Mac and have a body of Book text (200 pages) in MS Word done on a PC which I want to transfer to Pages for publishable quality.
    My problem is that I want to be able to include images and drawings into the existing text and keep a column along the right of the template for quotes and paragraph headings.
    I seemed to get this sorted some time ago at an Apple 1-1 tutorial at Bluewater which gave me a preliminary idea of how to do this ( thought I had cracked it!) using Format Advanced and Section Master Objects. However, in the doing of it, I have been unable to make it happen. I sense it's possible and just out of reach...!! Can Dennis or any others help me get this sorted please? Thanks
    GoBo

    shippo_uk wrote:
    Is there no way …
    again: each frame has to be re-calculated.
    consider speeding-up render-processes by
    • a new, faster Mac
    • more RAM
    • purchase of Compressor, and use its 'virtual render-farm'-feature aka full-use of all cores of your Mac
    • even more Ram
    • clever 'distribution' of source files and project files onto fast (7200rpm/ fw800) external harddrives instead of one single intHDD for OS&working files
    • a lil' more Ram
    • play wit your kids while Mac's rendering …

  • Dynamically set template for Print Quote report

    We need to customize "Print Quote" in Quoting
    As part of this we will be having 2 custom templates (will be related to data definition "Quote Printing", ASOPRT).
    These two templates have to be defaulted based on the quote status - one for status "Approved", and the other template for other non "Approved" statuses.
    How can this be achieved dynamically? (OAF CO customization / personilization)
    There doesn't seem to be any setup for assigning different templates based on status.
    Profile option "ASO: Default Layout Template" can be utilized to change the default template, but we need this template to be defaulted dynamically based on the Quote status.
    Thanks,
    Sumanth
    Edited by: user1131947 on Oct 25, 2011 3:51 AM

    If you want to create a custom report using concurrent program then refer:
    http://apps2fusion.com/apps/apps/63-xml-publisher-concurrent-program-xmlp
    If you want to create a custom report using OAF page then refer:
    http://apps2fusion.com/at/51-ps/260-integrating-xml-publisher-and-oa-framework
    -Anand

  • How to use one WAD template for all the available queries

    Hi,
    I have created a WAD template... Now we have close to 25 queries which will use that template for displaying their output at Portal...
    Is there any way that i don`t have to create multiple copies of my WAD template...
    I.e. all queries would call that same template through portal...

    Hi,
    The Bex report uses the Standard Template 0ANALYSIS_PATTERN while it is executed.
    So if your sure that the look and feel of all the Reports is going to remain same, you don't need to even attach all these Queries to Templates in WAD.
    When you execute the BEx query, it would pick up the standard template and run it in portal.
    But if you want to customize the Report Template:
    1) You can change this standard template 0ANALYSIS_PATTERN  and customize it according to ur requrement in WAD.
    2) Or you can create a copy of this standard template and change it as required. Then change the template in spro (transaction RSCUSTV27) to point to this Z template.
    Let me know if you need more details.
    Regards,
    Forum

  • How to crate a page template for multiple page instances?

    Hello,
    When I use the Administration Portal to create a page with portlets in the Portal Resource Library, I can choose to use that page it in my portal. The problem is that I can use it only once. How can I crate a page template with portlets so I can use use it as a template for many page instances in one portal?
    I'm using Portal 8.1.6.
    Regards,
    Eirik

    Hey Dave, See the image below:

  • Can I set up a template for importing images in QT Pro?

    I would like to set up a process where I define a "template" of how I want a QT Pro movie to be created by importing a bunch of image files in a folder. For example, I would specify it to import image1,image2, image3 etc. that would all be in a folder. Once imported into QT I would define various time points in the movie with names like, Part1, Part2 etc. Then I would save this out using a particular compression choice. Now I would like to take that template and point it at another folder whose image names would be the same (i.e. image1, image2, etc.) but the images would actually be different pictures. This way I could create a series of movies that all have the same compression and time point names (I think in QT these are called chapters), but are actually movies of different things. Is this possible with QT Pro? If not, which QT creation tool would allow me to do this?
    Thanks in advance to anyone who can help me.

    QuickTime is AppleScript aware and has its own "dictionary". Many scripts and droplets have already been compiled and you can download them from this link:
    http://www.apple.com/applescript/quicktime/
    Some need further editing to update them to version 7 features but it's not difficult using the Script Editor app.
    Tiger's new Automator app could also be used but its feature set is rather basic. Newer actions are available for download from the Mac OSX Downloads page.

  • Oracle Sesame Adaptater - missing template for creation of a new SAIL repo.

    Hi,
    I'm trying to deploy the Sesame Adaptater on my TOMCAT server.
    At the point 8.9 of the doc ( http://docs.oracle.com/cd/E18283_01/appdev.112/e11828/sem_sesame.htm#BABFFEFA) I'm suppose to type in the sesame console the following comand :
    "create oracle."
    I got this error :
    ERROR : No template called Oracle found in C:\Users\<Username>\AppData\Roaming\Aduna\OpenRDF Sesame Console\templates
    By reading the Sesame doc and according to this page (http://www.openrdf.org/doc/sesame2/users/ch07.html) I suppose that I have to add in the "C:\Users\<Username>\AppData\Roaming\Aduna\OpenRDF Sesame Console\templates" directory a file based on this template :
    # Sesame configuration template for a main-memory repository
    @prefix rdfs: <http://www.w3.org/2000/01/rdf-schema#>.
    @prefix rep: <http://www.openrdf.org/config/repository#>.
    @prefix sr: <http://www.openrdf.org/config/repository/sail#>.
    @prefix sail: <http://www.openrdf.org/config/sail#>.
    @prefix ms: <http://www.openrdf.org/config/sail/memory#>.
    [] a rep:Repository ;
    rep:repositoryID "{%Repository ID|memory%}" ;
    rdfs:label "{%Repository title|Memory store%}" ;
    rep:repositoryImpl [
    rep:repositoryType "openrdf:SailRepository" ;
    sr:sailImpl [
    sail:sailType "openrdf:MemoryStore" ;
    ms:persist {%Persist|true|false%} ;
    ms:syncDelay {%Sync delay|0%}
    Do anyone have the correct template ?
    I didn't find any other thread about this problem, so I supose it's an easy issue to solve, but the Semantic Technologies are totally new for me.
    Arthur

    I finally find the answer to my question. The template used in the tutorial is present in the sesame adapter.
    I just had to extract the files into the "sdordfsesame.jar", the template is locate in "sdordfsesame.jar/org/openrdf/console/oracle.ttl".
    After adding the "oracle.ttl" to the correct directory, it's work fine.
    Arthur

Maybe you are looking for

  • How do I specify an external viewer for animation?

    I occasionally receive PDF files that have accompanying animations (.avi, etc) that Adobe acrobat reader 9.4.1 expects to play using an external viewer. On one of my computers (Linux, KDE), it launches xine.  On another (also Linux, KDE), it launches

  • Premiere/Media Encoder crashing EVERY time I try to export project.

    Many of you have encountered similar issues, and I've scoured the forums with no resolve to my specific issue. Crashing every time I go to export in Premiere or ME. Using latest versions of both through CC--8.2 On Windows 7, I've looked into the AppD

  • Can't drag clips from clip pane to build movie

    The clips in the clip pane turn grey when clicked (or opaque...not blue) and can't be dragged into the clip viewer. I can select them, edit them in the clip pane, but can't drag them. Help!

  • HELP IMPORTING INTO LIGHTROOM 4.4

    I am having problems all of a sudden importing my RAW files into Lightroom.  I have been doing nothing different and have been using the same equipment.  Can someone please help?  It just says that it can't read the files. 

  • How to set a Conditional Format in a Crosstab

    Hello, I think I have a straight forward problem, but after reading the instructions I can't seem to make this work. I am using BI 10.1.3.4.1 I have a crosstab that I have build as an RTF template that looks like the following name rolename, priv nam