Terminal server does not have any installed licenses

Good morning! Faced with a some trouble while configuring Terminal Server (Windows Server 2012 based). I selected licensing mode "Per User" and now I see this message:
“The Remote Desktop Session Host server is in Per User licensing mode and No Redirector Mode, but license server “server name” does not have any installed licenses with the following attributes:
Product version: Windows Server 2008 or Windows Server 2008 R2
Licensing mode: Per User
License type: RDS CALs”
So this is trial using of terminal server - I have 25 days yet but already today I can't connect to server using RDP. There is an error message about absent licensing server. How can I activate licenses in trial mode? Thank you for support.

Hi,
Thank you for posting in Windows Server Forum.
From the error description it seems that your issue caused by setting up different Licensing mode. We need to install the proper RDS CAL on the License server. If the license server has installed licenses of the other mode, changing the licensing mode
for the terminal server may also resolve the issue.
To change the Licensing mode we can use RD Licensing diagnoser or by PowerShell command.
To change the licensing mode on RDSH/RDVH:
$obj = gwmi -namespace "Root/CIMV2/TerminalServices" Win32_TerminalServiceSetting
$obj.ChangeMode(value) - Value can be 2 - per Device, 4 - Per user
Please refer below article for information.
RD Licensing Configuration on Windows Server 2012
http://blogs.technet.com/b/askperf/archive/2013/09/20/rd-licensing-configuration-on-windows-server-2012.aspx
Have you installed License server on Server 2012 and you have RDS CAL of Server 2008 R2?
If that’s the case then first you need to purchase the RDS CAL for server 2012 and then you can configure on server 2012 because server 2012\R2 RDS CAL can work with lower version OS but Server 2008 R2 RDS CAL can’t work on Server 2012\R2.
Please check computability matrix.
RDS and TS CAL Interoperability Matrix
http://social.technet.microsoft.com/wiki/contents/articles/14988.rds-and-ts-cal-interoperability-matrix.aspx
Hope it helps!
Thanks.
Dharmesh Solanki

Similar Messages

Your server does not have PHP installed, or PHP is turned off error.

I am trying to install WordPress from a download and keep on getting this error message Error: PHP is not running. What can I do.

Its your Server Error, Not firefox issue.
If your trying to install the wordpress locally, use WAMP server
If your installing in your server or hosted server, contact the admin

When I try to install wordpress via firefox it says this:WordPress requires that your web server is running PHP. Your server does not have PHP installed, or PHP is turned off. What is PHP, and what do I do?

I dont know, if this is placed under the right category, but I really am a dummie about this!
please if anyone could provide a simple answer.
thank you!

That file might have moved to a different location on the server. I think you'll need to check with RefWorks support or your local IT department on why the install page links do not work.

Cannot modify application: [dimension] does not have any members

Hi experts,
When I try to add a newly created dimension to an application, I get the error message: "[dimension] does not have any members. Validate and process members first".
I have indeed added members to the dimension and saved to the server and processed. However, I guess that the processing does not work as it should because when I process the dimension, it only goes further than "Progress (1/4)", followed by the message "The task has been successfully completed".
I would expect it to go up to "Progress (4/4)....
The backward compatibility pack has been installed.
Any suggestions?

Hi Petar,
- Version is 7 SP4 for Microsoft
- It's a customer install
- Same behavior in Apshell. I can "process" the dimension in Apshell but I don't think it really processes it. It still stops at step 1/4 even at Apshell
- When I add the dimension to an application, it says that the dimension does not contain any members, even in ApShell.
So to summarize: the behavior is the same in Apshell.
Can I look into any logs to see exactly what happens?
Thanks,
Sam

The security database on the server does not have a computer account for this workstation trust relationship

When I try to log on to my DC it says "The security database on the server does not have a computer account for this workstation trust relationship". It won't let me log on. I installed another server server 2012r2 (its virtual )
and I can get to ADSI edit.
I think what happened was I had a pc that could not connect without unplugging the network cable. So I found this fix
FIX: “The security database on the server does not have a computer account for this workstation trust relationship”2032011
I’ve seen a lot of solutions, or suggestions rather, with regard to the error in the title of this post. In my experience, the problem can almost always be resolved without extra domain add/removes and reboots, which is the most prevalent solution I have
seen around. Usually, this issue is due to a mismatch between attributes of the computer account in Active Directory and those values on the system itself. Here are the steps I take to fix this issue when it crops up:
Open up Active Directory Users & Computers pointed to the domain the computer account resides in
From the “View” pull-down menu, make sure that “Advanced Features” is checked
Navigate to the part of your organizational unit (OU) structure where the computer account for this server resides
Open the Properties for the computer object
Choose the “Attribute Editor” tab on the Properties dialog box
Check the Attributes dNSHostName & servicePrincipalName – anywhere that a fully qualified hostname is specified (e.g. myserver.mydomainname.com), make sure that the entry matches the hostname
you have configured when you go here on your server: Start -> Computer -> Right-Click, Properties -> Change Settings (under “Computer name, domain… settings”) -> Full Computer Name
As an example, for a fictitious W2K8 R2 server whose Full Computer Name is “srv1.mydomainname.com”, these attribute/value pairs should be in Active Directory:
dNSHostName:
srv1.mydomainname.com
servicePrincipalName:
HOST/SRV1
HOST/srv1.mydomainname.com
RestrictedKrbHost/SRV1
RestrictedKrbHost/srv1.mydomainname.com
TERMSRV/SRV1
TERMSRV/srv1.mydomainname.com"
Not reading it carefully I add a computer with the same name as the pc having the issue and followed the above. The problem is that I did not notice that the spn did not want the name of my server (serv1) but the name of the trouble
pc.
dcdiag output
PS C:\Users\administrator.TOM> dcdiag.exe
Directory Server Diagnosis
Performing initial setup:
Trying to find home server...
***Error: DC3 is not a Directory Server. Must specify /s:<Directory Server> or /n:<Naming Context> or nothing to
use the local machine.
ERROR: Could not find home server.
PS C:\Users\administrator.TOM> dcdiag.exe /s:DC2
Directory Server Diagnosis
Performing initial setup:
* Identified AD Forest.
Done gathering initial info.
Doing initial required tests
Testing server: Default-First-Site\DC2
Starting test: Connectivity
The host 9e0dca7a-d017-445a-b354-adee5ff53d48._msdcs.TOM could not be resolved to an IP address. Check the DN
server, DHCP, server name, etc.
Neither the the server name (DC2.TOM) nor the Guid DNS name (9e0dca7a-d017-445a-b354-adee5ff53d48._msdcs.TOM)
could be resolved by DNS. Check that the server is up and is registered correctly with the DNS server.
Got error while checking LDAP and RPC connectivity. Please check your firewall settings.
......................... DC2 failed test Connectivity
Doing primary tests
Testing server: Default-First-Site\DC2
Skipping all tests, because server DC2 is not responding to directory service requests.
Running partition tests on : ForestDnsZones
Starting test: CheckSDRefDom
......................... ForestDnsZones passed test CheckSDRefDom
Starting test: CrossRefValidation
......................... ForestDnsZones passed test CrossRefValidation
Running partition tests on : DomainDnsZones
Starting test: CheckSDRefDom
......................... DomainDnsZones passed test CheckSDRefDom
Starting test: CrossRefValidation
......................... DomainDnsZones passed test CrossRefValidation
Running partition tests on : Schema
Starting test: CheckSDRefDom
......................... Schema passed test CheckSDRefDom
Starting test: CrossRefValidation
......................... Schema passed test CrossRefValidation
Running partition tests on : Configuration
Starting test: CheckSDRefDom
......................... Configuration passed test CheckSDRefDom
Starting test: CrossRefValidation
......................... Configuration passed test CrossRefValidation
Running partition tests on : TOM
Starting test: CheckSDRefDom
......................... TOM passed test CheckSDRefDom
Starting test: CrossRefValidation
......................... TOM passed test CrossRefValidation
Running enterprise tests on : TOM
Starting test: LocatorCheck
......................... TOM passed test LocatorCheck
Starting test: Intersite
......................... TOM passed test Intersite
PS C:\Users\administrator.TOM> regsvr32 schmmgmt.dll
PS C:\Users\administrator.TOM> netdig /fix
netdig : The term 'netdig' is not recognized as the name of a cmdlet, function, script file, or operable program.
Check the spelling of the name, or if a path was included, verify that the path is correct and try again.
At line:1 char:1
+ netdig /fix
+ ~~~~~~
+ CategoryInfo : ObjectNotFound: (netdig:String) [], CommandNotFoundException
+ FullyQualifiedErrorId : CommandNotFoundException
PS C:\Users\administrator.TOM> Setup /PrepareSchema
Setup : The term 'Setup' is not recognized as the name of a cmdlet, function, script file, or operable program. Check
the spelling of the name, or if a path was included, verify that the path is correct and try again.
At line:1 char:1
+ Setup /PrepareSchema
+ ~~~~~
+ CategoryInfo : ObjectNotFound: (Setup:String) [], CommandNotFoundException
+ FullyQualifiedErrorId : CommandNotFoundException
PS C:\Users\administrator.TOM> netdiag /test
netdiag : The term 'netdiag' is not recognized as the name of a cmdlet, function, script file, or operable program.
Check the spelling of the name, or if a path was included, verify that the path is correct and try again.
At line:1 char:1
+ netdiag /test
+ ~~~~~~~
+ CategoryInfo : ObjectNotFound: (netdiag:String) [], CommandNotFoundException
+ FullyQualifiedErrorId : CommandNotFoundException
PS C:\Users\administrator.TOM> nslooup
nslooup : The term 'nslooup' is not recognized as the name of a cmdlet, function, script file, or operable program.
Check the spelling of the name, or if a path was included, verify that the path is correct and try again.
At line:1 char:1
+ nslooup
+ ~~~~~~~
+ CategoryInfo : ObjectNotFound: (nslooup:String) [], CommandNotFoundException
+ FullyQualifiedErrorId : CommandNotFoundException
PS C:\Users\administrator.TOM>

Ok fixed.
At a elevated cmd prompt run ;
C:\Users\administrator.TOM>setspn -x
As you can see the DC serv1 had duplicate SPNs.
Checking domain DC=TOM
Processing entry 1
HOST/serv1.TOM is registered on these accounts:
CN=SERV1,OU=Domain Controllers,DC=TOM
CN=C00049,CN=Computers,DC=TOM
{14E52635-0A95-4a5c-BDB1-E0D0C703B6C8}/TOWN-HBWJ29ZOQC is registered on these ac
counts:
CN=Administrator,CN=Users,DC=TOM
CN=TOWN-HBWJ29ZOQC,CN=Computers,DC=TOM
{14E52635-0A95-4a5c-BDB1-E0D0C703B6C8}/town-hbwj29zoqc.TOM is registered on thes
e accounts:
CN=Administrator,CN=Users,DC=TOM
CN=TOWN-HBWJ29ZOQC,CN=Computers,DC=TOM
RestrictedKrbHost/serv1 is registered on these accounts:
CN=C00049,CN=Computers,DC=TOM
CN=SERV1,OU=Domain Controllers,DC=TOM
RestrictedKrbHost/serv1.TOM is registered on these accounts:
CN=C00049,CN=Computers,DC=TOM
CN=SERV1,OU=Domain Controllers,DC=TOM
found 5 groups of duplicate SPNs.
Went to the computers OU and changed computer c00049 to the correct SPN. Now I have a new issues, I'll start a new thread.

I cannot run iPhoto after update to Yosemite. I cannot update iPhoto because the application store does not have any iPhoto update available. Anyone can advice how to overcome this hassle?

After update to Yosemite 10.10.3 the iPhoto program icon is banned and there is an error message that an update is required to run iPhoto, but the application store shows a message that iPhoto does not have any update available at this time. There is not even any iPhoto program available on the application store. Any suggestion on how to solve this annoyance?

mende1 wrote:
Unfortunately, Apple has removed both iPhoto and Aperture from the Mac App Store so they cannot be downloaded anymore. This means you are forced to migrate to Photos (included in OS X 10.10.3) or, if this app does not include features you need, look for a different app.
Not true. Apple has removed both Apps from App Store so you cannot buy them anymore. But if you have any of these Apps already purchased in the past, then you can still download them on your Mac.
Aristotle247 wrote:
After update to Yosemite 10.10.3 the iPhoto program icon is banned and there is an error message that an update is required to run iPhoto, but the application store shows a message that iPhoto does not have any update available at this time. There is not even any iPhoto program available on the application store. Any suggestion on how to solve this annoyance?
Open App Store, sign in with your Apple ID and go to Purchases tab. If you see iPhoto app listed there close down the App Store and do this steps as this is what worked for me:
Open Finder and go to Applications folder.
Locate iPhoto app
Drag iPhoto app from your Applications folder to Trash (NOTE: Do not emptied Trash yet)
Open App Store app and navigate to Purchases tab.
Click on Install button which is next to the iPhoto app (on the right hand side).
Once iPhoto is downloaded again, test it if its working for you. If all is ok, you can remove your Trash.

Resizing a TIFF File: Overwriting TIFFFields does not have any effect

Hi,
I have some TIFF files that I am receiving through a FAX server. Some of the TIFF files have an image length of *1077 pixels and a DPI of 200x98*. These images open fine in generic viewers like Microsoft Image Viewer and IrfanView and the image size in the information dialog shows up fine (1752x2158). But when I open the images in a LeadTools viewer (that works off TIFF Header tags), the image appears stretched out.
I am trying to re-sample the image to make it a true Letter size image (1700x2200) with resolution of 200x200. I have been able to set the TAG_X_RESOLUTION and TAG_Y_RESOLUTION which I can see changed in the Tag Viewer. But changing the following tags does not have any effect on the resulting image:
TAG_IMAGE_WIDTH
TAG_IMAGE_LENGTH
TAG_ROWS_PER_STRIP
the following is the code I am using, I have tried all possible ways (removing TIFFFeilds and then adding them), but it has no effect. The last options is to use a Print Driver from within Java and Print the image (that re-samples it into a 8.5x11 inch image with 200 DPI). At this point, I am just curious about writing TIFFFields with images. Any ideas are appreciated:
Thanks,
Manuj
+
import java.io.BufferedOutputStream;
import java.io.File;
import java.io.FileInputStream;
import java.io.FileOutputStream;
import java.util.Iterator;
import javax.imageio.IIOImage;
import javax.imageio.ImageIO;
import javax.imageio.ImageReader;
import javax.imageio.ImageWriter;
import javax.imageio.metadata.IIOMetadata;
import javax.imageio.stream.ImageInputStream;
import javax.imageio.stream.ImageOutputStream;
import org.w3c.dom.NamedNodeMap;
import org.w3c.dom.Node;
import com.sun.media.imageio.plugins.tiff.BaselineTIFFTagSet;
import com.sun.media.imageio.plugins.tiff.TIFFDirectory;
import com.sun.media.imageio.plugins.tiff.TIFFField;
import com.sun.media.imageio.plugins.tiff.TIFFImageWriteParam;
import com.sun.media.imageio.plugins.tiff.TIFFTag;
import com.sun.media.imageioimpl.plugins.tiff.TIFFT6Compressor;
               //set the input stream for to the reader
               tiffFileReader.setInput(tiffFileInputStream);
               //define the writer
               ImageWriter tiffWriter = (ImageWriter) ImageIO.getImageWritersByMIMEType("image/tiff").next();
               //define the writer param with compression;
               TIFFImageWriteParam writeParam = (TIFFImageWriteParam)tiffWriter.getDefaultWriteParam();
               TIFFT6Compressor compressor = new TIFFT6Compressor();
               writeParam.setCompressionMode(TIFFImageWriteParam.MODE_EXPLICIT);
               writeParam.setCompressionType(compressor.getCompressionType());
               writeParam.setTIFFCompressor(compressor);
               writeParam.setCompressionQuality(Float.parseFloat("1"));
// get the metaData
               IIOMetadata imageMetadata = null;
               IIOImage testImage = null;
               for(int i=0;i<filePageCount;i++)
                    imageMetadata = tiffFileReader.getImageMetadata(i);
                    TIFFDirectory dir = TIFFDirectory.createFromMetadata(imageMetadata);
          // Get {X,Y}Resolution tags.
          BaselineTIFFTagSet base = BaselineTIFFTagSet.getInstance();
          TIFFTag tagXRes = base.getTag(BaselineTIFFTagSet.TAG_X_RESOLUTION);
          TIFFTag tagYRes = base.getTag(BaselineTIFFTagSet.TAG_Y_RESOLUTION);
          TIFFTag tagImageWidth = base.getTag(BaselineTIFFTagSet.TAG_IMAGE_WIDTH);
TIFFTag tagImageLength = base.getTag(BaselineTIFFTagSet.TAG_IMAGE_LENGTH);
          TIFFTag tagRowsPerStrip = base.getTag(BaselineTIFFTagSet.TAG_ROWS_PER_STRIP);
          TIFFField fieldRowsPerStrip = new TIFFField(tagRowsPerStrip, TIFFTag.TIFF_SHORT, 1, (Object)new char[]{2200});
          // Create {X,Y}Resolution fields.
          TIFFField fieldXRes = new TIFFField(tagXRes, TIFFTag.TIFF_RATIONAL,1, new long[][] {{200, 1}});
          TIFFField fieldYRes = new TIFFField(tagYRes, TIFFTag.TIFF_RATIONAL,1, new long[][] {{200, 1}});
          // Create Width/Height fields.
          TIFFField fieldImageWidth = new TIFFField(tagImageWidth,TIFFTag.TIFF_SHORT,1, (Object)new char[]{1728});
          TIFFField fieldImageLength = new TIFFField(tagImageLength, TIFFTag.TIFF_SHORT,1, (Object)new char[]{2200});
          //TIFFTag imageLengthTag = fieldImageLength.getTag();
          // Append {X,Y}Resolution fields to directory.
          dir.addTIFFField(fieldXRes);
          dir.addTIFFField(fieldYRes);
          //add Image Length and height parameters
          dir.addTIFFField(fieldImageWidth);
          dir.addTIFFField(fieldImageLength);
          // dir.removeTIFFField(278);
          dir.addTIFFField(fieldRowsPerStrip);
testImage = new IIOImage(tiffFileReader.read(i), null, dir.getAsMetadata());
+
The resulting image with this carries the updated DPI values (200x200) but still carries the old values of 1752x1077, the length being exactly half of what Irfan view is showing.
Edited by: Manuj on Nov 2, 2010 10:48 AM

Your problem for some reason sounds familiar.
EDIT
Ok, now I remember. Your post is like this one in the old forums,
http://forums.sun.com/thread.jspa?forumID=540&threadID=5425983
Basically, for viewing purposes Irfanview scales the image's height by 2 and changes the dpi to *200x196*. It does this to achieve a 'square' pixel. The image that appears on screen now looks roughly how a printer would print it. However, the image data is still the same squished 1752x1077 image.

Since I have Yosemite on my iMac I can't view PDF files in Safari anymore. It keeps telling me to upgrade my Adobe Reader, but it is the latest version. Please help? I don't have this problem on my Macbook that does not have Yosemite installed.

Since I have Yosemite on my iMac I can't view PDF files in Safari anymore. It keeps telling me to upgrade my Adobe Reader, but it is the latest version. Please help? I don't have this problem on my Macbook that does not have Yosemite installed.

Back up all data before making any changes. Please take each of the following steps until the problem is resolved.
Step 1
If Adobe Reader or Acrobat is installed, and the problem is just that you can't print or save PDF's displayed in Safari, you may be able to do so by moving the cursor to the the bottom edge of the page, somewhere near the middle. A black toolbar should appear under the cursor. Click the printer or disk icon.
Step 2
There should be a setting in its preferences of the Adobe application such as Display PDF in Browser. I don't use those applications myself, so I can't be more precise. Deselect that setting, if it's selected.
Step 3
If you get a message such as ""Adobe Reader blocked for this website," then from the Safari menu bar, select
          Safari ▹ Preferences... ▹ Security
and check the box marked
          Allow Plug-ins
Then click
          Manage Website Settings...
and make any required changes to the security settings for the Adobe PDF plugin.
Step 4
Triple-click anywhere in the line of text below on this page to select it, the copy the selected text to the Clipboard by pressing the key combination command-C:
/Library/Internet Plug-ins
In the Finder, select
          Go ▹ Go to Folder
from the menu bar, or press the key combination shift-command-G. Paste into the text box that opens by pressing command-V, then press return.
From the folder that opens, move to the Trash any items that have "Adobe" or “PDF” in the name. You may be prompted for your login password. Then quit and relaunch Safari.
Step 5
The "Silverlight" web plugin distributed by Microsoft can interfere with PDF display in Safari, so you may need to remove it, if it's present. The same goes for a plugin called "iGetter," and perhaps others—I don't have a complete list. Don't remove Silverlight if you use the "Netflix" video-streaming service.
Step 6
Do as in Step 4 with this line:
~/Library/Internet Plug-ins
If you don’t like the results of this procedure, restore the items from the backup you made before you started. Relaunch Safari.

Error : Rowkey does not have any primary key attributes

Hello All,
I'm developing an ADF application which has a few ADF forms. The forms have VO's and some tables.
On running, I seem to be getting this error
<Error> <oracle.adfinternal.view.faces.model.binding.CurrencyRowKeySet> <BEA-000000> <ADFv: Rowkey does not have any primary key attributes. Rowkey: oracle.jbo.Key[], table: oracle.jbo.server.ViewObjectImpl@2ecf4f19.>
Where does the Rowkey have to be set? Is it in the VO?
Regards,
PP

Make sure that the VO's you use have at least one attribute selected as a key attribute. GO to View Object overview editor and select attributes tab, see whether there is at least one attribute marked as a key. If not select the most appropriate attribute from the list of fields and go to edit attribute dialog, tick the key attribute property.

Extending view object which does not have any entity object associated with

Dear all
I am interested in extended on of the standard pages VO object in JDeveloper OA extension
the standard page is oracle/apps/pos/supplier/....suppSummaryPG
and one of the view which I am interested to extend is suppSummVO
the problem is that when I copy xml files and java files from apps server to
my local jdevelope folder , I am not able to open that suppSummVO, the changes which
I find from other VO object and this(suppSummVO) object is that, this VO does not have any
Entity Object associated with it and the only query is return on this VO , is it the reason that
I am not able to open it Jdeveloper, but the real issue is that how can I extends this type of VO
in my OAExtension.
Regard
Noman

Its the same way of extending VO with EO's or without EO's.
Sometimes if the .class files arn't decompiled we get weird jbo errors. So use cavaj/jad to decompile those Impl.class, RowImpl.class files and keep them in the same folder as vo.xml in myprojects and try extending that VO.
Thanks,
Ravi

Does Cisco have any demo license for VCS?

For a study way, I would like to test VCS at my network for a while.
Does Cisco have any demo license for VCS?

Hi
I believe you get very limited (1x traversal/1x non traversal) licenses if you just install the software.
Also see this thread; you may get a time limited demo license from the licensing team if you ask nicely.
https://supportforums.cisco.com/discussion/11555961/home-lab-vcs-and-tms#3687717
Aaron

Getting ADFv: Rowkey does not have any primary key attributes

Hi
I am using 11.1.1.5.0 version of JDeveloper.
The ViewObject has DistaccountId,OperatingUnit,PricingCategoryId,PartyId as Primary Key and
the EntityObject also has DistaccountId,OperatingUnit,PricingCategoryId,PartyId as Primary Key
and my Table also has the same set of attributes(DistaccountId,OperatingUnit,PricingCategoryId,PartyId) as Primary Key .
I am getting the following error on Create,Update Operation -
"<CurrencyRowKeySet> <_computeCurrentRowKey> ADFv: Rowkey does not have any primary key attributes. Rowkey: oracle.jbo.Key[], table: oracle.jbo.server.ViewObjectImpl@6c41af."
Also,when i choose a row for Update operation,the pop-up that opens up holds the values for some other record.
Please suggest.

I'm not too sure but can you check if you have the following text in your page source ?
selectedRowKeys="#{bindings.<TreeBindingName>.collectionModel.selectedRow}"
selectionListener="#{bindings.<TreeBindingName>.collectionModel.makeCurrent}"

This user does not have an Installed repository

Hi alll,
I am establishing the connection with server using JDeveloper 9.0.2.822.I am getting this error
""This user does not have an Installed repository"""
I m new in this JDeveloper. Kindly help how come I can establish
the connection with server

Which server you try to connect to?
Why are you still using jdev 9.0.2? This version is at least 4 years out of date.
Timo

My Email does not have any functions on the bottom bar?

My Email does not have any functions on the bottom bar?
I open an email and there no functions to delete forward or reply with. Anyone have an idea?

Hi
Just to clarify what your saying under menu > settings > Connectivity the only option you can see is Bluetooth? There are no other options to select?
Because under the connectivity menu you should be able to Network, WiFi, Bluetooth, USB, Settings, Connection manager, Mobile data tracker, Data Transfer, Video sharing, Admin settings and play via radio.
All the options should be visible on the connectivity menu on a N8 with Nokia Belle installed.
If you find this post helpful, a click upon the white star at bottom would always be appreciated.
If it also solves your problem, clicking ACCEPT AS SOLUTION below it will benefit other users!

How to find a customer who does not have any activity in the last 5 years

HI all,
How to find a customer who does not have any activity in the last 5 years.
Thanks & Regards,
Moderator message: not directly related to ABAP development, please have a look in the respective functional forum.
Edited by: Thomas Zloch on Jan 3, 2011 2:20 PM

Post Author: tzinser
CA Forum: Formula
Okay, I left off a lot of important information...
I'm using two tables
TWDATA
EVENT
From TWDATA I'm pulling the fields TWDATA.OrderNumber and TWDATA.DisbursementDate
From EVENT I'm pulling the fields EVENT.EventCode and EVENT.CompletedDate
The two tables are linked by OrderNumber.

Terminal server does not have any installed licenses

Similar Messages

Maybe you are looking for