Test-Connection problem

Running in to strange issue with the Test-Connection cmdlet, both inside a script I am writing and when running it directly from a powershell session.  No matter what computer/site I try to test I get "test-connection : Not Found"(full error
text below) this occurs even when trying test-connection localhost. I am able to ping both localhost and remote computers without a problem.  it looks like someone had a similar problem a few years ago(http://social.technet.microsoft.com/Forums/scriptcenter/en-US/dad5613a-aa6e-4f0d-b99d-82d6afda83d7/bizzare-testconnection-failure?forum=ITCG)
but it doesn't look like it was ever resolved and none of the suggestions in the thread worked for me. 
Test-Connection : Not found
At line:1 char:16
+ test-connection <<<<  127.0.0.1
    + CategoryInfo          : InvalidOperation: (:) [Test-Connection], ManagementException
    + FullyQualifiedErrorId : TestConnectionException,Microsoft.PowerShell.Commands.TestConnectionCommand

Test-Connection is based on querying the Win32_PingStatus WMI class.  I suspect you might have a corrupted WMI repository.  There are instructions for rebuilding it on the knowledge base, I believe.  Should be easy to find with a web search. 
(I'd do it, but I'm posting this from my phone.)

Similar Messages

  • SAP B2B server - test connection problem

    Hi Team,
    We have business connector 4.6 sap BC server. We have created adapter connection in sapbc server to establish a connection to SAP ECC system but when we perform test connection in sapbc server it is throwing out error as"  Name or password is incorrect (repeat logon)" though we mentioned the right password and logon credentials.
    Created listener for sap adapter in BC server and maintained program id and other configuration details. Created TCP/IP RFC connection from SAP using register program id "SAPBC and it is working fine.
    communication from SAP to BC is working fine however we could receive error when we tried to test the connection from BC to SAP ECC.
    Below are the BC Error trace for reference.
    **** ERROR file opened at 20140702 192722 India Standard , SAP-REL 620,0,72 RFC-VER 3 480692 MT-SL
    T:162 ======> Name or password is incorrect (repeat logon)
    T:162 <* RfcReceive [5] : returns 3:RFC_SYS_EXCEPTION
    T:162 ======> Name or password is incorrect (repeat logon)
    T:162 <* RfcReceive [6] : returns 3:RFC_SYS_EXCEPTION
    T:162 ======> Name or password is incorrect (repeat logon)
    T:162 <* RfcReceive [7] : returns 3:RFC_SYS_EXCEPTION
    T:162 ======> Name or password is incorrect (repeat logon)
    T:162 <* RfcReceive [8] : returns 3:RFC_SYS_EXCEPTION
    >TS> Wed Jul 02 19:55:59 2014
    T:190 ======> Name or password is incorrect (repeat logon)
    T:190 <* RfcReceive [9] : returns 3:RFC_SYS_EXCEPTION
    T:190 ======> Password logon no longer possible - too many failed attempts
    T:190 <* RfcReceive [10] : returns 3:RFC_SYS_EXCEPTION
    T:190 ======> Password logon no longer possible - too many failed attempts
    T:190 <* RfcReceive [11] : returns 3:RFC_SYS_EXCEPTION
    T:190 ======> Password logon no longer possible - too many failed attempts
    T:190 <* RfcReceive [12] : returns 3:RFC_SYS_EXCEPTION
    Below are the system details:-
    SAPBC – B2B web method integration server version 4.6 on windows NT system
    SAP ECC Details - ECC 6.0, Oracle 10.2, HP Unix 11.31 (Unicode)
    Please share if you have any clues on this.
    Regards,
    Ajay Asawa

    Hi Deepak,
    I have attache here the screenshot in first two part. Please check attachment
    and also attach the error message
    There is any change we have done recently in both system. B2B connected to our ECC production system
    Regards,
    Ajay Asawa

  • Iweb publishing/test connection problem

    I haven't changed my settings in iweb (ILife 08) but recently when I test connection it says "connection to ftp._______ could not be established."  If I haven't changed anything, why all of us sudden does it not establish a connection?

    iWeb 08 (iLife 08) has no FTP.
    iWeb 09 has.
    Check the settings, even if you haven't changed them. Then try again.

  • Test JDBC connection problem

    Hi all,
    I got a very weird problem when I click Test Connection Button.
    I installed xml publisher Enterprise 5.6.2 in the server, I attempt to configure Jdbc connection in this server. once I click the Test Connection Button after I input all information, all information will be cleaned in this server, i can not get any message if the connection works well.But if i use url like http://serverIP:15101/xmlpserver/ to login xml publisher on other machine, I will get successful or error message.
    who has same experience in JDBC configuration?how to solve it ,thanks in advance.

    Apologies ... not really sure what the issue is. I assume you are talking about setting up the JDBC connection for a data source?
    In that case the entries would be something like:
    connection string: jdbc:oracle:thin:@host.company.com:1525:ora10g
    un: oe
    pw oe
    driver class: oracle.jdbc.driver.OracleDriver

  • WiFi connection problem testing

    I am also one of many having the intermittent WiFi connection problem at home.
    From a technical testing mode. Get the free the "FreePing" application by Marcel Lanz in the app store.
    What you will find is when you are having the internet connection problem, you can not ping your Router. However, you can ping any wired Mac or desktop computer on your router/switch network.
    This tells you, you are on the network, getting an IP address from the router DHCP server.
    The problem is not related to the Wi-Fi connection or connecting to the network (OSI Layer 2 model).
    It appears to be a problem at the OSI Network Layer 3. The router is having a problem in the routing table. The hard part is the Layer 3 problem can be either in the Touch or the router in this configuration. Meaning, the combination of both Touch and router is causing the problem. Thus, the intermittent operation.
    Yes, this is probably more technical than anyone here cares to know.

    Hi,
    You should be debugging the driver / contact the vendor. Seems like netrtwlanu is realtek based chipset.
    The abort points to this driver (at least the PC). 
    Regards,
    Balaji.

  • BaseFileName cannot be nothing or an empty String during Test Connection

    Dear All,
    I have FDM+Foundation+HSF 11.1.2 installed
    I have stacked with the following problem:
    when I try to Test Connection (Authentication Provider Window) during Load Balance Configuration I am getting
    +“BaseFileName cannot be nothing or an empty String+
    Parameter name: value”
    Can somebody help me with it?
    Best Regards,
    Siarhei

    same error i faced, i restarted the APP server and it worked then.

  • Unending connectivity problems -- and Desktop Help...

    I'm wasting so much time on connectivity problems that it's positively wearying. Prior to the installation of BT Infinity here in April, I had a low quality broadband service because of the length of the line from the exchange: if I could get a download speed of 1.2Mbps and an upload of a quarter of that, I was doing well. 
    BT advised that thanks to fibre optic, my Internet should run much faster. So we had Infinity installed. I'm registered with Speedtest.net so am able to see my performance record.
    The average download speed is now aroun d 6Mbps and the average upload, more than that at 7Mbps. How an upload speed can consistently be faster than a download escapes me.
    But I'm not familiar with the ways of Internet connectivity and try as a I might, can't get my head around it.
    This desktop computer runs Vista OS. Vista was **bleep** when it came out and is renowned for its botched handling of Internet connections. So I'm not blaming BT for the literally unending connectivity problems that are occurring now, with line drops, speeds slowing to a crawl, and no guarantee that any connection will last. But it would be good to actually use BT software to help fathom out what's going wrong here, and today's typical morning which looks like this:
    1) Boot up computer. Automatic connection to hub via Netgear USB wireless adapter. Hub is on ground floor of this 3-storey property but signal strength from hub  is excellent, as confirmed by inSSIDer monitoring, currently showing 54 with no other networks anywhere near that figure.
    2) Perhaps 5 minutes after connection established, it's then lost. 'Local Only' is displayed. This is, apparently, a known Vista problem. But Microsoft has issued a fix for it. I know this, because it took 100 hours of ploughin g the Net to find out that MS had finally admitted to one more Vista screw-up. I've used the Microsoft router "fix it" before and it didn't work ("failed to process") so uninstalled it and have DL'd it again now and run it. This time it says it has fixed everything.
    3) Computer is re-booted to make the fix effective. Computer connects to Internet. Speedtest.net check yet again confirms that upload speed is faster than download speed.
    4) Connection dies. So much for Microsoft Fix It.
    5) Windows diagnostics reports that it can re-set the IP profile (or something.) I click yes. The re-set goes through. Connectivity is restored. 10 minutes later, connectivity is lost. Just a red X in the tray. No connection of any kind, not even that daft 'Local Connection' only alert.
    6) Reboot. Yet again. BT Desktop Help was installed here and ran OK when we were using our Netgear DSG34 router. But since the change to the BT Hub, the BT program has never run at all. So-oo. . . It has been uninstalled. And then re-DL'd and re-installed. And though the installation  has been completed, clicking on 'launch' has failed to launch anything. But anyway. An hour ago, in one of the brief periods today when the Internet connection was holding up, I Revo-ed out the earlier install, DL'd BT desktop Help and re-installed it. . . and I'm still at the same stage as always, with a  Firefox browser page that's open and completely blank and has been for the past 30 minutes. The URL is:
    file:///C:/Program%20Files/BT%20Broadband%20Desktop%20Help/btbb/Start.html
     Repeated page re-loading gets nowhere. Malwarebytes PRO is turned OFF to prevent any possibility of blocking and the antivirus is termporaily SUSPENDED. This PC runs on Windows standard firewall but even turning that OFF doesn't get the page to load. Copying the address into Internet Explorer in case there's a Firefox problem merely results in Firefox being opened and the same blank page running there.
    7) After all that. . . Connection lost yet again and this time, Windows cannot connect at all. It reports that the "wireless network security key is not correct". I happen to know that it is, because this is maybe the 20th time it has reported this in the past 10 days and every time I have to key in the "correct" key all over again. . . at which point Windows still says it isn't correct and cannot repair.
    Turning off the computer completely, unplugging from the wall, holding in the power switch for a full minute to clear the circuits, traipsing up and dowen three flights of stairs to turn off the hub, then wait, then turn the power back onm again. . . Ah, wot fun times I'm having here with my particular versioin of Infinity (as in, an infinity of connectivcity problems.)
    Summary: I seem to be being simultaneously hit with one issue after another.
    I'm bewildered as to why ever since Infinity was installed here, my upload speed is generally faster than my download speed. I'm not happy with endless Internet connection failures though am thinking that Vista is playing a large part here with its "wrong security key" and unending 'Local Only / Limited Connection' failures. I do miss my Netgear router and the ability to access a fantastic help menu and re-boot directly from the desktop without having to keep going up and down three flights of sdtairs to do so (I haven't been able to find out how toe access the BT Hub remotely.)
    Above all though: I'm  really tired of repeatedly trying to run freshly downloaded and installed BT Desktop Help software but getting no further than a blank page because the program has stalled.
    If anyone has any advice / suggestions, other than to buy a carrier pigeon, that'd be much appreciated.
    Thanks.

    Thanks again to John and gg30340. Here's an update:
    1) BT Desktop Help removed completely from this computer. The uninstaller itself mopped up everything, which surprised me. But anyway.
    2) Bt Home Hub manager set up and working. Had to input serial number and create new password. All of this sounds fairly easy and would be if one had the device near the desk. But the idiots who built this property shoved the BT master socket inside the garage next to the door. Our two home computers are on the third floor. To ensure the wireless signal strength is OK, the Hub and Infinity module/device/whatever it's called are on a high shelf. It's a major job to even reach the darn things, never mind read the labels seeing as how the BT Infinity engineer was good enough to tidy up the cabling and make a very tight connection to the wall socket.
    3) I had hoped to be able to back up the Hub's settings, seeing as the software provides for Advanced Settings / System / Backup. But not on mine (Hub 3.0). All that System allows is choosing which internet clock to define the accurate time. Everything else in System is just a pattern of short lines as if trying to indicate that there's some text there but it's invisible.This is now my second encounter with BT software which, for whatever reason, isn't functioning as it should on this PC.
    4) Hub reset to factory fresh, according to BT guide.
    5) Reset appears to have achieved nothing apart from requiring the password to be popped in again. After reset, it wasn't even possible to connect to the hub manager. Internet connectivity was eventually established for all of 30 seconds and then, gone.
    6) Computer was shut down and then booted anew. Internet connectivity is still. . . dreadful. One minute everything's fine and then, literally,. the next minute a webpage won't load. Even opening the Hub Manager has taken three attempts, i.e., disconnecting from the Internet, re-connecting, failing, and trying twice more until success. Yet all the time these failures are occurring, the tray icon is showing a steady, unwavering green icon for Local and Internet access -- despite the fact, there manifestly isn't any.
    7) Speedtest. net tests are actually showing upload and download 'trajectories' going slower and slower and finally halting at some point on the arc, then after a period of up to 30 seconds, suddenly becoming animated again. Speed test results with broadband speed checker UK and Think Broadband's checker are so at variance with one another, and with Speedtest, net, that it seems all three are using different technologies in pursuit of the same thing. Either way, upload speeds continue to be much, much faster than download speeds, a state of affairs I certainly have never encountered before.
    8) Speedtest net tests taken in the past 10 minutes, with one test following on from its predecessor, begin at 8.24 down/8.88 up, followed by 5.24 down / 6.40 up, followed by a mind-numbingly lonnnnng 0.62 down / 8.70 up -- in other words, a continuous yo-yoin g of Internet connectivity to the pooint that it actually might as well not even be here (I've had to make five attempts just to get on to this forum. . .)
    9) BT Speedtest will necessitate disconnection of everything downstairs and all boxes being lugged up here. This is actually going to require uncoililng tied-off cabling and hanging off a stepladder to do so -- though I surely can't be the only person in Britain who doesn't have a nice, handy BT master socket in their study or lounge. That said though: until we switched to Infinity, we *never* experienced these kinds of horrendous connectivity problems and never had need to unplug the Netgear router downstairs and bring it upstairs to connect directly to tjhe desktop PC so BT's own test could be run.
    I'll just have to get to work dismantling stuff tomorrow. However, I have to say that after a factory re-set which has changed nothing at all, I'm beginning to think there's a problem with the BT line itself (hence why I'm happy to follow the advice here, though less than happy at the prospect of the messing about involved.)
    Thanks, you two, for your patient help, and also for clarifying the situation re the three signal paths being shown on inSSIDer. At least I know that's usual now! And now, hopefully, when I press 'Post', I won't be faced with an endlessly spinning Firefox circle culminating in  what may well be, or seem to be, the 57,938th time today of seeing "Page Not Found". . .

  • PHP and MySQL Connection problem

    I am trying to make a PHP MySQL on a remote server connection in Dreamwesaver CS3.
    When I enter the information (host, user, password, etc.) and hit TEST, I get the following error message.
    "Access Denied. The file may not exist, or there could be a permission problem. Make sure you have proper authorization on the server and the server is properly configured."
    I know the user, password, etc. work, as I can access the MySQL database with other software.
    I checked with my host and they say there are no permission problems on their end.
    I have checked the settings on the Test Server page in Site Setup and everything looks correct and works there.
    I have not seen this particular problem described in other forum postings (although there are a LOT of postings on this topic!).
    Any help would be appreciated.

    I thought my testing server was the remote server and is always on as far as I know. I don't know how to turn it on or off.
    Is there some other testing server that I should be aware of?
    Frank
    Date: Wed, 3 Jun 2009 15:43:02 -0600
    From: [email protected]
    To: [email protected]
    Subject: PHP and MySQL Connection problem
    I know you are using remote, but is your testing server on? if not turn that on and see if that does it. it just happened to me working on remote server and could not get mysql conn to work, until I turn on my testing (developer server), then I was able to connect to mysql and the tables that I created in phpmyadmin remotly was downloaded.
    >

  • I am experiencing wireless connection problem on 4s after ios 8.1 upgrade. The wireless icon appears showing that it's connected but webpages do not load. I have checked my internet connection with other devices and seems to be alright. what to do?

    Hi
    I am experiencing wireless connection problem on 4s after ios 8.1 upgrade. The wireless icon appears showing that it's connected but webpages do not load. I have checked my internet connection with other devices and seems to be alright. what to do?
    I have tried reseting the network settings and forgetting my wireless connection and re-connecting to it. I even backed up my phone on itunes and restored it, factory reseted it. Nothing seems to work.
    Also after my upgrade to ios 8.1 my personal hotspot option under cellular data has disappeared.
    Would you please help me out? I would really appreciate it.

    Hi..
    Restart your router then restart the iPhone to test.
    If that doesn't help, try this support article >   iOS: Troubleshooting Wi-Fi networks and connections

  • Connection Problems following Upgrade at Exchange

    I have been having problems since 1st November.
    I had received an e-mail advising that “we’re rolling out our faster broadband and we’ll be upgrading our network in your area on 01-Nov-11…For the first ten days or so after your upgrade, your broadband might slow down or even stop now and again. That's normal and your speed will soon settle down”
    That night when I tried to use BT broadband after approx 90 seconds – connection was lost and router re-synced a number of times each hour.
    Over next 10 days this did not improve. Contacted technical call centre and after running a line check, I was told that there were ‘anomalies’ on the line. Next day the call centre rang back and said upgrade work was ongoing and I would receive an e-mail when upgrade had finished and things should improve 10 days after the e-mail.
    On 25 November I received an e-mail advising “This is to let you know that we've now upgraded your line and you should now have an improved, more consistent broadband connection, and maybe a speed increase.”
    Again I saw no improvement in service. Connection was lost after 90 seconds and then a number of times each hour. I also noticed that the connection was lost if a phone call was received.
    I spent next 2 weeks talking with call centre, again advised of ‘anomalies on line’ but eventually e-mailed BT Care and fault was logged on 31.12.11.
    Fault number:VOL051-53388****** – fault is still shown as being Open.
    On 5 January a BT engineer called. Spent a couple of hours testing connection, checking filters etc and told me that bandwidth was very narrow and this was probably the reason for connection dropping. He felt the upgrade at the exchange had caused this. Said the upgrade had been from ADSL to ADSL2. My BT exchange is Cregagh.
    I have never had issues in past and due to distance from exchange, I was told to expect speed of between 2-4 mb. I have accelerator plate fitted and problems only began following the upgrade
    Could the upgrade at the exchange be causing the connection to drop?
    Can anything be done at the exchange to improve the connection? Or is something else causing the problems which are ongoing?
    Speed has improved since engineers visit. Although enginner tested filters, could this be the problem?
    Any advice would be greatly appreciated.
    Stats are:
    Speed test
    FAQ
    Test1 comprises of two tests
    1. Best Effort Test:   -provides background information.
    Download  Speed
    3107 Kbps
    0 Kbps
    4000 Kbps
    Max Achievable Speed
     Download speed achieved during the test was - 3107 Kbps
     For your connection, the acceptable range of speeds  is 1200-4000 Kbps.
     Additional Information:
     Your DSL Connection Rate :3859 Kbps(DOWN-STREAM), 1016 Kbps(UP-STREAM)
     IP Profile for your line is - 3404 Kbps
    2. Upstream Test:   -provides background information.
    Upload Speed
    843 Kbps
    0 Kbps
    1016 Kbps
    Max Achievable Speed
    >Upload speed  achieved during the test was - 843 Kbps
     Additional Information:
     Upstream Rate IP profile on your line is - 1016 Kbps
    We were unable to identify any performance problem with your service at this time.
    It is possible that any problem you are currently, or had previously experienced may have been caused by traffic congestion on the Internet or by the server you were accessing responding slowly.
    If you continue to encounter a problem with a specific server, please contact the administrator of that server in the first instance.
    Homehub 2 ADSL stats
      ADSL line status <script type="text/javascript"></script> Connection information
    <script type="text/javascript"></script> Line state
    Connected
    Connection time
    0 days, 3:18:22
    Downstream
    3,859 Kbps
    Upstream
    1,016 Kbps
    ADSL settings
    <script type="text/javascript"></script> VPI/VCI
    0/38
    Type
    PPPoA
    Modulation
    ITU-T G.992.3
    Latency type
    Interleaved
    Noise margin (Down/Up)
    5.9 dB / 6.0 dB
    Line attenuation (Down/Up)
    52.5 dB / 27.0 dB
    Output power (Down/Up)
    0.0 dBm / 12.9 dBm
    Loss of Framing (Local)
    227
    Loss of Signal (Local)
    21
    Loss of Power (Local)
    0
    FEC Errors (Down/Up)
    0 / 4294967231
    CRC Errors (Down/Up)
    1297 / N/A
    HEC Errors (Down/Up)
    N/A / 0
    Error Seconds (Local)
    4649
    Solved!
    Go to Solution.

    the upgrade to adsl2 brings a more aggressive sytem on any noise on your line and what was a good connection on adslmax may not necessarily be a good connection on adsl2 - but can with some effort.  as you are using the accelerator you must have an NTE5 master and other extension sockets so have you tried connecting direct to the test socket?
    have you removed the bellwire on terminal 3 on all sockets - I know the accelerator helps with this but removal is 100% effective.
    have you tried the quiet line test   dial 17070 option 2  should hear nothing and best with corded phone   if cordless dull hum is normal
    If you like a post, or want to say thanks for a helpful answer, please click on the Ratings star on the left-hand side of the post.
    If someone answers your question correctly please let other members know by clicking on ’Mark as Accepted Solution’.

  • Test Connection failed in Crystal Reports for Eclipse using SQL Server 2008

    I installed an SQL Server Express 2008 on my local PC (Window XP SP3). I downloaded sqljdbc4.jar to Crystal Reports for Eclipse
    IDE library path and tried to Test Connection, but got the Ping failed message : The TCP/IP connection to the host localhost, port 1433 has failed. It said that check that an instance of SQL Server is running on the host (I saw SQL Server SQLEXPRESS is Running on my PC) and accepting TCP/IP connection at the port (I enabled TCP/IPin my PC's SQL Server Network Configuration),
    and that no firewall is blocking TCP connection to the port(I turned OFF Window Firewall on my OC). Can anyone tell me how can I fix this problem ?

    Hi,
    Check the below thread also:
    http://scn.sap.com/thread/1634856
    Thanks,
    DJ

  • FTP/SSL Connection Problem for FTP Receiver Adapter

    Hello All,
    We are trying to establish an FTPS/SSL connection with one of our customers from our XI(Unix) system, and are receive following error:
    <b>iaik.security.ssl.SSLException: Server certificate rejected by ChainVerifier</b>
    Communication Channel Parameters:
    Connection Security: FTP (FTP Using SSL/TLS) for Control Connection or FTP (FTP Using SSL/TLS) for Control Connection and Data Connection
    Command Order: AUTH TLS, USER, PASS, PBSZ, PROT
    Checkbox - Use X.509 Certificate.... checked (Certificate was provided by third party (customer issued) and uploaded to service_ssl certificate store on J2EE server)
    Data Connection: Passive
    Port: 10021
    Keystore: service_ssl
    X.509 Certificate & Private Key: ssl-credentials
    Note: Initial handshaking occurs but connection is being dropped by the third party FTP Server when SSL certificate credentials are being validated. We also tried connecting to the third party FTPS server using standard FTPS client(FileZilla software), this connection gets established successfully with no certificate issues which means certificate and third party FTP Server is functioning correctly.
    We therefore are thinking that the problem lies with our XI system being unable to load the certificate information correctly at the point when FTPS session is being established.
    Your help and suggestions will be greatly appreciated.
    Thanks and Best Regards
    Prashant Rajani

    Hello All,
    Further in order to test connection set up and communication channel configuration we tried simulating the FTP connection locally by configuring FTP Server using FileZilla at a local machine and accessed it from Client's XI Server.
    This set up simulates the problem we encounter with our customer's FTP Server.
    If connection security parameter in communication channel for Sender FTP Adapter is set to <b>"FTPs( FTP Using SSL/TLS) with Control Connection" only</b>, file gets successfully created with data at the FTP server but as soon as we switch the connection security parameter to <b>"FTPs( FTP Using SSL/TLS) with Control and Data Connection"</b>, we receive error "Certificate rejected by Chain Verifier". The initial handshaking happens successfully and file gets created at the FTP Server but its empty, connection fails when attempt is made to write data into file and we end up with said error thereby closing the connection.
    This is what the FTP (FileZilla) sees when the XI system attempts to set-up a fully encrypted data  (FTPS) connection i.e., connection security parameter value as<b>"FTPs( FTP Using SSL/TLS) with Control and Data Connection"</b> :-
    - (not logged in) (10.18.106.34)> Connected, sending welcome message...
    - (not logged in) (10.18.106.34)> 220-FileZilla Server version 0.9.18 beta
    - (not logged in) (10.18.106.34)> 220-written by Tim Kosse ([email protected])
    - (not logged in) (10.18.106.34)> 220 Please visit http://sourceforge.net/projects/filezilla/
    - (not logged in) (10.18.106.34)> AUTH TLS
    - (not logged in) (10.18.106.34)> 234 Using authentication type TLS
    - (not logged in) (10.18.106.34)> SSL connection established
    - (not logged in) (10.18.106.34)> USER test
    - (not logged in) (10.18.106.34)> 331 Password required for test
    - (not logged in) (10.18.106.34)> PASS ***********
    - test (10.18.106.34)> 230 Logged on
    - test (10.18.106.34)> PBSZ 0
    - test (10.18.106.34)> 200 PBSZ=0
    - test (10.18.106.34)> PROT P
    - test (10.18.106.34)> 200 Protection level set to P
    - test (10.18.106.34)> SYST
    - test (10.18.106.34)> 215 UNIX emulated by FileZilla
    - test (10.18.106.34)> PWD
    - test (10.18.106.34)> 257 "/" is current directory.
    - test (10.18.106.34)> CWD /payment/
    - test (10.18.106.34)> <b>250 CWD successful. "/payment" is current directory.</b>- test (10.18.106.34)> TYPE I
    - test (10.18.106.34)> 200 Type set to I
    - test (10.18.106.34)> PASV
    - test (10.18.106.34)> <b>227 Entering Passive Mode (10,27,7,103,15,63)</b>- test (10.18.106.34)> STOR BHPDSB20060911-153840-834.txt
    - test (10.18.106.34)> <b>150 Connection accepted</b>
    - test (10.18.106.34)> <b>Data connection SSL warning: SSL3 alert read: fatal: bad certificate</b>
    - test (10.18.106.34)> <b>Data connection SSL warning: SSL_accept: failed in SSLv3 read client certificate A</b>- test (10.18.106.34)> <b>Data connection SSL warning: error:14094412:SSL routines:SSL3_READ_BYTES:sslv3 alert bad certificate</b>- test (10.18.106.34)> <b>Data connection SSL warning: error:140940E5:SSL routines:SSL3_READ_BYTES:ssl handshake failure</b>- test (10.18.106.34)> <b>426 Connection closed; transfer aborted.</b>- test (10.18.106.34)> QUIT
    - test (10.18.106.34)> 221 Goodbye
    - test (10.18.106.34)> SSL connection established
    Please suggest your valuable inputs if we are missing out something. Any helpful inputs in this regard is highly appreciated.
    Thanks and Best Regards
    Prashant

  • Content Server connection problems

    SAP Content Server connection problems
    I have installed the SAP Content Server on a Windows 2003 server. I connected to the Max DB on the remote server from Database Manager on my PC. I created repositories in R/3 in OAC0 and CSADMIN and saved documents to the Content Server. This all took a few hours from O/S install to saving a document in the repository, so I do understand the basics of the Content Server and Max DB.
    Unfortunately we are not going to use Windows; we will be running this on UNIX. Therefore I'm trying it out on a Linux system while I wait for the AIX system to be available. It's been a long road but I have finally gotten the install to finish 'successfully' however I can't connect from R/3.
    When I run the check http://10.XXX.YYY.ZZZ:1090/ContentServer/ContentServer.dll?serverInfo from the browser on the Linux host I get back a good status as shown below:
    serverType="SAP HTTP Content Server";serverVendorId="SAP AG";serverVersion="640";serverPatch="0";serverBuild="16";pVersion="0046";serverStatus="running";serverDate="2008-03-25";serverTime="22:39:45";startUpDate="2008-03-25";startUpTime="22:32:21";lastAccessDate="2008-03-25";lastAccessTime="22:38:33";
    However when I do this from any my PC it won't connect. (Of course the real problem is I can't connect from R/3.)
    If I try the same URL from a different user session on the same Content Server Linux host I get the same good status.
    I thought maybe the httpd.conf file was wrong so I tried:
    Listen 0.0.0.0:1090
    In cs.conf I tried commenting out AdminSecurity & AdminSecurityGroup.
    I also changed StorageDriver from SAPDBStorage to FSStorage.
    I don't know if this is related or just another problem to tackle once I can get through this one. I was not able to add the new system to the Database Manager. I get the error "-4 could not connect to socket [10060]".
    Thanks to all for any help. Points will dutifully be rewarded.
    David

    Hi Henk,
    It looks like I am dumber than a rock. The firewall was indeed active on the Linux host. I turned it off and can now do the http connection test to the Content Server. (I awarded very helpful points.)
    I still can't connect to the database with the Database Manager however the message has changed; it now says "-4 XSERVER might be inactive". I just turned off the firewall so I have a few things to try, like figure out how to start MaxDB without the DB Manager. I'll post my progress. Thanks Henk.
    David
    Edited by: Dave Hill on Mar 28, 2008 12:00 AM
    Now I have installed the Database Studion on my PC. No I'm getting this message when I try to connect to the host/database on the Linux system: "Cannot connect to host 10.XXX.XXX.XXX:7210 [Connection refused: connect], -813."
    Does MaxDB need to be started to connect? Any idea how to start it manually? Thanks,
    David
    Edited by: Dave Hill on Mar 28, 2008 1:06 AM
    Ah, at long last. There's this tiny yet very important little program called x_server that SAP didn't include in the SAP Content Server install guide. This needs to be running in order for anything to connect. I'm sure most of you know about it but for the rest you can find it in:
    /sapdb/programs/bin
    Then type
    ./x_server start
    I'm not sure what user it should run under but I started it as the sdb user.
    You could automate the database startup with a script. See http://maxdb.sap.com/doc/7_7/e9/005dac1592496783e26133eb7fad0b/frameset.htm
    Thank you Henk, I'll call this problem solved and award points.
    Edited by: Dave Hill on Mar 28, 2008 2:10 AM

  • Can't Create a Data Source - Failed to test connection. [DBNETLIB][ConnectionOpen (Connect()).]SQL Server does not exist or access denied

    Hi there,
    I am having a serious issue with The Power BI Data Management Gateway which I am hoping that someone can help me with.
    Basically I am setting a connection between a Power BI demo site and a SQL 2012 Database based on Azure. The Data Management Gateway and is up and running, and Power BI has managed to connect to it successfuly.
    By following the tutorials at
    here I was able to successful create my Data Connection Gateway with a self-signed certificate.
    However, when trying to create the data source I come into problems. The Data Source Manager manages to successfully resolve the hostname, as per the screenshot below:
    Bear in mind that I exposed the require ports in Azure as endpoints and I managed to modify my hosts file on my local machine so I could access the SQL server hosted in Azure using its internal name -- otherwise I would not be able to get this far.
    However the creation of the data source also fails when trying to created it whilst logged in the SQL server in question:
    The Data Source Manager returns the error when using the Microsoft OLE DB Provider for SQL Server:
    Failed to test connection. [DBNETLIB][ConnectionOpen (Connect()).]SQL Server does not exist or access denied
    I tried using the SQL Server Native Client 11.0 instead but I also get an error. This time the error is:
    Failed to test connection. Login timeout expiredA network-related or instance-specific error has occurred while establishing a connection to SQL Server. Server is not found or not accessible. Check if instance name is correct and if SQL Server is configured to allow remote connections. For more information see SQL Server Books Online.Named Pipes Provider: Could not open a connection to SQL Server [53]. 
    Some considerations
    If I provide an invalid username/password, the Data Source Manager does say that the username and password is incorrect.
    Firewall is turned off in the SQL Server (either way, this error also happens if I try top use the Data Source Manager whilst logged in the SQL Server itself).
    SQL Profiler does not show any attempt of connection.
    The SQL server instance in question is the default one.
    The error happens regardless if I select the option to encrypt connection or not.
    In SQL Configuration manager I can see that all protocols are enabled (TCP/IP, Named Pipes and Shared Memory.
    The Event Viewer does not provide any further errors than the one I have copied in this post.
    I'm at a loss here. Could someone please advise what might I be doing wrong?
    Regards,
    P.

    Here is what I had to do to solve this issue:
    Basically I had to add the MSSQL TCP/IP port as an end-point in Azure. After I did that, then I was able to create the data-source. However, I was only able to authenticate with a SQL account, as any domain account would return me an error saying that the
    domain isn't trusted.
    What puzzles me here is how come the Data Source Manager would inform me that an account username/password was invalid, but it would fail/timeout if I provided valid credentials (!?!?!!?)

  • Connection problem with LDAP

    Hi,
    Is it possble to connect 10g version of database using LADAP from forms 6i ?
    Thanks
    Bcj

    Hi Wilfred,
    I would like to describe the tests and results which i have tried regarding the connection problem between forms 6i and Oracle 10.2 through OID(LDAP),
    Test 1.
    Installed forms 6i + patch 17 and Oracle 10.1.0.2 separately, and assigned the forms home to oracle 10 .1.0.2
    Received ,the message as, ORA -12154: TNS: could not resolve service name
    Test 2.
    Installed forms 6i + patch 17 and tried to install Oracle 10.1.0.2 in to the forms home then received an error message as "Oracle 10g database cannot be installed into an existing 7.x or 8.0.x ORACLE_HOME "
    Test 3.
    Installed Oracle 10.1.0.2 and installed forms 6i + patch 17 in to the Oracle 10.1.0.2 home, here I was able to connect through tnsnames.ora, but not through LDAP.
    When tried through LDAP , received the error message as , ORA -12154: TNS: could not resolve service name
    Here, forms created NET80 folder and it was trying to connect the database from this folder.
    Test 4
    Forms installed in test 1 and test 2 were able to connect through the oracle home which created at the time of test 3.
    Test 5
    Also tried to install the Oracle 10.1.0.2 into the oracle home which created at the time of third test, here again I received the error message as same as the second test.
    So, i agreed that it cannot, when this form version is tightly integrated to its oracle net libraries.
    After test 3, i have checked the oracle home in the registry all the variables pointing to the 10g database, here i was thinking is it possible to configure the oracle net libraries or any other to get connected.
    Thanks for your help
    Bcj

Maybe you are looking for