Test connectivity to remote machine

I have created a web service consumer proxy to call a web service on a remote host from our SAP machine. However, ICF in SAP tells me that the connection to that remote host has been refused, so there might be a problem with firewall in between.
To check that I would need to make a test-connection from the SAP host to the remote machine, on a specific TCP port. Usually I would do that via telnet on the shell, but I do not have a shell access to the SAP machine.
So my question: Is there a way within SAP to test the connection to a specific port on a remote host?

Hi,
yes works fine.
If the port is closed
Trying...                                                                                                                                                                                                                                                      telnet: connect: A remote host refused an attempted connect operation.                                                                                                                                                                                         External program terminated with exit code
If the Port is open
Trying...                                                                                                                                                                                                                                                      Connected to 127.0.0.1.                                                                                                                                                                                                                                        Escape character is '^]'.                                                                                                                                                                                                                                      Connection closed.

Similar Messages

  • Forms Error When Connect To Remote Machine

    I install the Oracle8 on a machine and then install Developer2.1 on it.
    I install The oracle8 on another machine.
    I install Server installation on both machine on NT platefom.
    I connect the sql of one machine to other Database it was connected and there was no error. But I try to connect the forms Builder to the remote machine database it was reported an error
    " tns: Unable to connect the databse"
    What is problem Please Help me
    Your,s
    [email protected]
    null

    As a copy of this query has been posted to the CR design forum at 11:21, assuming this is indeed a design question.
    Thus setting this thread as answered.
    - Ludek

  • Ways to securely connect to remote machine - own lan

    hi,
    I just wondered which possibilities you have to securely connect to another machine in your own lan, with java.
    I want to connect to it, then when the connection is established (encrypted traffic of course) I want to be able to read some data of the other box, then of course close the connection.
    which ways does java offer to do this securely ?
    so far,
    stefan g.

    ok, I don't want to disturb you people, so it is my last trial.
    I don't know much about java-security, especially kind of network-security.
    afaik it is possible to use SSH, can I do something with that ?
    can SSL be used for this purpose ?
    so far,
    stefan g.

  • Connecting from remote machine

    This topic seems to have been talked about alot, but I've got another variation of the problem. I get the following error when I try to connect from a client machine to my IFS server:
    oracle.ifs.common.IfsException: IFS-10110: Unable to construct directory service
    oracle.ifs.common.IfsException: IFS-10140: Unable to instantiate credential manager Ifs
    oracle.ifs.common.IfsException: IFS-10150: Unable to construct credential manager (oracle.ifs.server.IfsCredentialManager)
    oracle.ifs.common.IfsException: IFS-10176: Unable to get credential manager version
    java.sql.SQLException: ORA-06550: line 1, column 13:
    PLS-00201: identifier 'IFSSYS$CM.IFSCREDENTIALMANAGERPACKAGE' must be declared
    ORA-06550: line 1, column 7:
    PL/SQL: Statement ignored
    PLS-00201: identifier 'IFSSYS$CM.IFSCREDENTIALMANAGERPACKAGE' must be declared
    ORA-06550: line 1, column 7:
    PL/SQL: Statement ignored at oracle.jdbc.dbaccess.DBError.throwSqlException(DBError.java:168)
    My question is that I see the code is trying to access IFSSYS$CM. ...PACKAGE. When my IFS was set up, I used IFSTEST instead of IFSSYS, so in my IFS database the package does exist as IFSTEST$CM.... My first thought was that my IfsDefault (the service I'm trying to use) had the wrong user in it, but it does have User: IFSTEST.
    Any suggestions?
    Charlie

    Yeah, that would be a CLASSPATH issue. You've got the wrong version of the JDBC classes (classes12.zip). Make sure you're pointing to the one in $ORACLE_HOME/jdbc/lib -- and if you are, then copy the "one that works" from the iFS server machine to your client machine. That is, if iFS is even working on that machine. The missing library (when using classes111.zip) is very disturbing. I don't know why you're having such trouble with the JDBC library. Make sure you've got ORACLE_HOME/lib in your LD_LIBRARY_PATH.
    Now, please note that you cannot mix JDBC versions. That is, if you compile with JDK 1.1.8, you better be using classes111.zip when compiling and when running. With JDK 1.2, use classes12.zip.
    Also, your configuration is a little "weird". Really, you've got two server machines, both of which are essentially database AND iFS servers. On the "client" machine, you're just using Net8 software to talk to the other database, even though you've got the whole database installed. You may as well just install the Oracle 8i Client there. That's all you need.
    Secondly, iFS doesn't really have the notion of a "client", at least not the way you're working with it. If you copy the iFS jars and the service properties file (IfsDefault.properties) and run an iFS application on your "client", you're really running an full iFS server (I guess you could think of it as a "fat client" if you're familiar with that terminology). Currently, the way we have designed iFS is to have protocol servers provide the link between clients and the iFS server. That is, you could run a web browser (on a true client machine) and access the iFS server. Or you could map a network drive to the iFS server.
    Anyway, feel free to ask more questions.

  • When I try to connect to a remote machine using IPSecuritas, am getting the following error

    When am trying to connect to remote machine using IPSecuritas, I am getting the following error and hence not able to establish connection. Imported the security policy and when I start IPSec,  I get this error.
    Info     APP  IKE daemon started
    Info     APP  IPSec started
    Error    IKE  Foreground mode.
    Info     IKE  @(#)ipsec-tools CVS (http://ipsec-tools.sourceforge.net)
    Info     IKE  @(#)This product linked OpenSSL 0.9.7l 28 Sep 2006 (http://www.openssl.org/)
    Info     IKE  Reading configuration from "/Library/Application Support/Lobotomo Software/IPSecuritas/racoon.conf"
    Info     IKE  Resize address pool from 0 to 255
    Error    IKE  failed to bind to address 192.168.1.2[4500] (Address already in use).
    Info     APP  IKE daemon terminated
    Error    IKE  failed to bind to address 192.168.1.2[500] (Address already in use).
    Error    IKE  no address could be bound.
    Info     APP  IPSec terminated
    Please help me in fixing this issue. Thanks in advance!!..
    Thanks,
    RV

    Is this music purchased back in DRM days? I don't actually have any iTunes music so I can't test with my iTunes 7.5, but I know that without iTunes 10 you cannot even connect to the store anymore.  I wouldn't think that would require an active connection to the store all the time, otherwise how could you play music on a computer in the middle of nowhere?  Did you do something to trigger iTunes suddenly wanting to connect and check on machine authorization?

  • How to make OTM scripts to run on remote machines

    Hi,
    I came across lot of posts which tells how to configure OTM to connect to remote machines.
    Some how i dont understand when they say stop the OATS service and configure it manually
    Also to use the password for authentication manager.
    What i really want to know is step by step for a layman to set up OTM to run scripts on a remote desktop and on the local with the execution being displayed (not suppressed)
    How do we configure that?
    Any help is deeply appreciated!! my test cases are just stuck inprogress status
    Thanks
    Radhika

    Hi Radhika,
    For running Scripts from either the server or the remote machine using OTM you need to run the Agent Manager service as a console not the OATS service. For that you need to stop that service--> set the startup type as manual--> the run the ' C:\OracleATS\agentmanager\bin\AgentManagerService.exe –c AgentManagerService.conf ' command in the CMD to run this service as a console. Because this agent manager service is for OLT to communicate with its agents and works fine even if it is set to automatic or manual and started normally. Hope this helps.....
    Regards,
    Charles Kingsly

  • Applet is not reading remote machine(socket)

    i have created a java applet chat which has to connect to the remote system for chating. it is working well in local machine but it throws security error while trying to connect to remote machine where the server part of chat is located.
    Help me!

    Applet security demands that an applet can connect to a machine which belongs to the same domain only
    for eg., if u call a html as http://10.1.1.1/test.html and the applet in that html calls http://10.1.1.1/myServlet, then u will not have a problem. Else, u must sign the applet to work with any domain.

  • How to login to remote machine using SSH?

    Hi,
    I have a requirement where in I am required to connect to a remote machine using SSH and execute some commands, say a tail -100 on some file over there and pull back output data from the remote machine.
    I know we can use sockets to connect to remote machines and Runtime.exec to execute external commands. But I am unable to tie together the two of these to achieve whatever I want to do.
    Is it possible to somehow connect w/o using a custom server socket? The problem is that there is no concrete list of servers to connect to. It will be decided by the user. So I will not be able to install a server socket on each and every machine.
    Any help would be most appreciated. Thanks a lot.
    With regards,
    Ganesh

    Hi,
    I am writing a java program that will try to use a SSH client to connect to a remote machine. I do not want to log into every single remote machine to moitor stuff over there.
    My plan goes like this:
    Have a web application that can connect to a DB for all information regarding remote servers to be monitored.
    Based on user selection of a particular server, use data from the DB to connect to the particular remote server and pull in some data.
    Hope I am clear enough now. Thanks a lot.
    Ganesh

  • Test when can remote connecting a machine while rebooting

    After restart a remote machine in PS, I need to test when it is available to connect in Remote Desktop.
    I tired to use Test-Connection. But when it returns True, Remote Desktop still get error when connect. I tried the following and working ok (i.e. C:\RMC.RDP can connect ok) but with error. Any other way or without showing error?
    Restart-Computer -ComputerName 172.16.0.3
    Start-Sleep -Seconds 10
     While ((Get-Service -ComputerName 172.16.0.3 -DisplayName 'Remote Desktop Services').Status -ne 'Running' ) { Start-Sleep -Seconds 1 }
     C:\RMC.RDP
    Get-Service : Cannot open Service Control Manager on computer '172.16.0.3'. This operation might require other privileges.
     At line:3 ((Get-Service -ComputerName 172.16.0.3 -DisplayName 'Remote Desktop Serv ...
     +         ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
         + CategoryInfo          : NotSpecified: (:) [Get-Service], InvalidOperationException
         + FullyQualifiedErrorId : System.InvalidOperationException,Microsoft.PowerShell.Commands.GetServiceCommand

    Use script for checking RDP port response
    like:
    http://www.jonathanmedd.net/2011/12/testing-tcp-port-response-from-powershell.html

  • How to test oracle is up and running in remote machine using shell script

    Hello,
    I need help to write an linux script.
    I have a java application server running on machine 192.168.5.20 and our oracle 10g standard 1.0.2 is running on machine 192.168.5.21.
    I have found script to start oracle when computer is turned on.
    But I cannot start my application server automatically since it depends on whether oracle is up and running or not on the remote machine.
    Therefore, in case of power failure or maintenance, our client has to call us to start application server.
    I would be grateful if someone can help me "How can I write script to check oracle is up and running in machine 192.168.5.21 from machine 192.168.5.20.
    For your information, I have no oracle installed in application server. So tnsping won't work.
    What I want is when power is back, application server script automatically and tesing for oracle server is up and running. If it is up, script will start application server.
    Thanking you.

    Hi,
    It's not failover or experimental. My application server uses JBOSS and JBOSS needs database name to start up. My enviroment is LAN. My database is in different machine as I mentioned before. So In case of power failure, I need to start my application server (JBoss) manually, because I need to confirm that oracle is already running before start app server.
    I want an automated script (when power is just on) to start my application server which will wait to check if the datbase server is up I will start application server.
    The scripts given above It works if appserver and db server in the same machine (my development machine).
    But when I test the script in my production applicaiton server, It shows sqlplus command not found (my app server does not have any oracle client installed).
    About hostname yes My applicaiton server hostname is hostapp1 and dabase server hostname is hostdat1.
    Do you think Is it possible to test the script without oracle client not installed. or It has to be done writing code like java program and test using jdbc connection.
    Best regards.

  • Unable to connect to WMI (r) on remote machine "SCCMCLIENT03"

    Hi!
    I'm in the process of configuring the XP firewall to support the Client Push installation method that SCCM offers. At the moment I'm quite happy with the result. The SCCM client agents are installed properly on my reference machines.
    To secure that the WMI functionality is up and running I have (prior to the client agent installation) run wbemtest with following parameter (from server to client, and vice versa):
    \\host\root\cimv2
    I successfully contacted that specific namespace on both ends. But when I trace the log I find the following error which still indicates that something is wrong:
    CWmi::Connect(): ConnectServer(Namespace) failed. - 0x8004100e SMS_CLIENT_CONFIG_MANAGER 2009-03-10 11:12:14 1704 (0x06A8)
    ---> Unable to connect to WMI (r) on remote machine "SCCMCLIENT03", error = 0x8004100e. SMS_CLIENT_CONFIG_MANAGER 2009-03-10 11:12:14 1704 (0x06A8)
    Why do I get this? What am I missing here? I got the feeling of WMI functioning the way it should.
    Any hints on this one?
    In an MSDN-article (http://msdn.microsoft.com/en-us/library/aa389286(VS.85).aspx) I read the following lines:
    "If the user account that is on Computer A is not an administrator on Computer B, but the user account has Remote Enable permission on Computer B"
    Those lines are part of an article which describes how to configure Remote administrations properly. For that to work, does the computer account of my Central Site Server has to be part of the local administrators group on every client?
    Regards,
    Fredrik
    CCM.log
    Submitted request successfully SMS_CLIENT_CONFIG_MANAGER 2009-03-10 11:12:13 2408 (0x0968)
    Getting a new request from queue "Incoming" after 100 millisecond delay. SMS_CLIENT_CONFIG_MANAGER 2009-03-10 11:12:13 2408 (0x0968)
    ======>Begin Processing request: "TI11WDUE", machine name: "SCCMCLIENT03" SMS_CLIENT_CONFIG_MANAGER 2009-03-10 11:12:13 1704 (0x06A8)
    ---> Trying each entry in the SMS Client Remote Installation account list SMS_CLIENT_CONFIG_MANAGER 2009-03-10 11:12:13 1704 (0x06A8)
    ---> Attempting to connect to administrative share '\\SCCMCLIENT03.spost.nu\admin$' using account 'spost.nu\SA-SCCM_ClientPush' SMS_CLIENT_CONFIG_MANAGER 2009-03-10 11:12:13 1704 (0x06A8)
    Received request: "HPS6133J" for machine name: "SCCMCLIENT02" on queue: "Incoming". SMS_CLIENT_CONFIG_MANAGER 2009-03-10 11:12:13 2408 (0x0968)
    Stored request "HPS6133J", machine name "SCCMCLIENT02", in queue "Processing". SMS_CLIENT_CONFIG_MANAGER 2009-03-10 11:12:13 2408 (0x0968)
    ---> Connected to administrative share on machine SCCMCLIENT03.spost.nu using account 'spost.nu\SA-SCCM_ClientPush' SMS_CLIENT_CONFIG_MANAGER 2009-03-10 11:12:13 1704 (0x06A8)
    ---> Attempting to make IPC connection to share <\\SCCMCLIENT03.spost.nu\IPC$> SMS_CLIENT_CONFIG_MANAGER 2009-03-10 11:12:13 1704 (0x06A8)
    ---> Searching for SMSClientInstall.* under '\\SCCMCLIENT03.spost.nu\admin$\' SMS_CLIENT_CONFIG_MANAGER 2009-03-10 11:12:13 1704 (0x06A8)
    ---> System OS version string "5.1.2600" converted to 5,10 SMS_CLIENT_CONFIG_MANAGER 2009-03-10 11:12:14 1704 (0x06A8)
    ---> Service Pack version from machine "SCCMCLIENT03" is 3 SMS_CLIENT_CONFIG_MANAGER 2009-03-10 11:12:14 1704 (0x06A8)
    CWmi::Connect(): ConnectServer(Namespace) failed. - 0x8004100e SMS_CLIENT_CONFIG_MANAGER 2009-03-10 11:12:14 1704 (0x06A8)
    ---> Unable to connect to WMI (r) on remote machine "SCCMCLIENT03", error = 0x8004100e. SMS_CLIENT_CONFIG_MANAGER 2009-03-10 11:12:14 1704 (0x06A8)
    ---> Creating \ VerifyingCopying exsistance of destination directory \\SCCMCLIENT03\admin$\system32\ccmsetup. SMS_CLIENT_CONFIG_MANAGER 2009-03-10 11:12:14 1704 (0x06A8)
    ---> Copying client files to \\SCCMCLIENT03\admin$\system32\ccmsetup. SMS_CLIENT_CONFIG_MANAGER 2009-03-10 11:12:14 1704 (0x06A8)
    ---> Copying file "d:\Program Files\Microsoft Configuration Manager\bin\I386\MobileClient.tcf" to "\\SCCMCLIENT03\admin$\system32\ccmsetup\MobileClient.tcf" SMS_CLIENT_CONFIG_MANAGER 2009-03-10 11:12:14 1704 (0x06A8)
    ---> Copying file "d:\Program Files\Microsoft Configuration Manager\bin\I386\ccmsetup.exe" to "\\SCCMCLIENT03\admin$\system32\ccmsetup\ccmsetup.exe" SMS_CLIENT_CONFIG_MANAGER 2009-03-10 11:12:14 1704 (0x06A8)
    ---> Created service "ccmsetup" on machine "SCCMCLIENT03". SMS_CLIENT_CONFIG_MANAGER 2009-03-10 11:12:15 1704 (0x06A8)
    ----- Started a new CCR processing thread. Thread ID is 0xc6c. There are now 2 processing threads SMS_CLIENT_CONFIG_MANAGER 2009-03-10 11:12:15 2408 (0x0968)
    Submitted request successfully SMS_CLIENT_CONFIG_MANAGER 2009-03-10 11:12:15 2408 (0x0968)
    Getting a new request from queue "Incoming" after 100 millisecond delay. SMS_CLIENT_CONFIG_MANAGER 2009-03-10 11:12:15 2408 (0x0968)
    Found CCR "yb2xbq0a.CCR" in queue "Incoming". SMS_CLIENT_CONFIG_MANAGER 2009-03-10 11:12:15 2408 (0x0968)
    ======>Begin Processing request: "HPS6133J", machine name: "SCCMCLIENT02" SMS_CLIENT_CONFIG_MANAGER 2009-03-10 11:12:15 3180 (0x0C6C)
    ---> Trying the 'best-shot' account which worked for previous CCRs (index = 0x0) SMS_CLIENT_CONFIG_MANAGER 2009-03-10 11:12:15 3180 (0x0C6C)
    ---> Attempting to connect to administrative share '\\SCCMCLIENT02.spost.nu\admin$' using account 'spost.nu\SA-SCCM_ClientPush' SMS_CLIENT_CONFIG_MANAGER 2009-03-10 11:12:15 3180 (0x0C6C)
    Received request: "YB2XBQ0A" for machine name: "SCCMCLIENT01" on queue: "Incoming". SMS_CLIENT_CONFIG_MANAGER 2009-03-10 11:12:15 2408 (0x0968)
    Stored request "YB2XBQ0A", machine name "SCCMCLIENT01", in queue "Processing". SMS_CLIENT_CONFIG_MANAGER 2009-03-10 11:12:15 2408 (0x0968)
    ---> Started service "ccmsetup" on machine "SCCMCLIENT03". SMS_CLIENT_CONFIG_MANAGER 2009-03-10 11:12:16 1704 (0x06A8)
    ---> Deleting SMS Client Install Lock File '\\SCCMCLIENT03.spost.nu\admin$\SMSClientInstall.S01' SMS_CLIENT_CONFIG_MANAGER 2009-03-10 11:12:16 1704 (0x06A8)
    ---> Completed request "TI11WDUE", machine name "SCCMCLIENT03". SMS_CLIENT_CONFIG_MANAGER 2009-03-10 11:12:16 1704 (0x06A8)
    Deleted request "TI11WDUE", machine name "SCCMCLIENT03" SMS_CLIENT_CONFIG_MANAGER 2009-03-10 11:12:16 1704 (0x06A8)
    <======End request: "TI11WDUE", machine name: "SCCMCLIENT03". SMS_CLIENT_CONFIG_MANAGER 2009-03-10 11:12:16 1704 (0x06A8)
    ======>Begin Processing request: "YB2XBQ0A", machine name: "SCCMCLIENT01" SMS_CLIENT_CONFIG_MANAGER 2009-03-10 11:12:16 1704 (0x06A8)
    ---> Trying the 'best-shot' account which worked for previous CCRs (index = 0x0) SMS_CLIENT_CONFIG_MANAGER 2009-03-10 11:12:16 1704 (0x06A8)
    ---> Attempting to connect to administrative share '\\SCCMCLIENT01.spost.nu\admin$' using account 'spost.nu\SA-SCCM_ClientPush' SMS_CLIENT_CONFIG_MANAGER 2009-03-10 11:12:16 1704 (0x06A8)
    Submitted request successfully SMS_CLIENT_CONFIG_MANAGER 2009-03-10 11:12:17 2408 (0x0968)

    Here is what is in my ccmsetup.log
    <![LOG[GetSSLCertificateContext failed with error 0x87d00280]LOG]!><time="16:19:22.341+240" date="04-04-2012" component="ccmsetup" context="" type="3" thread="984" file="ccmsetup.cpp:5356">
    <![LOG[GetHttpRequestObjects failed for verb: 'GET', url: 'HTTPS://TEST-SCCM.copt.local/CCM_Client/ccmsetup.cab']LOG]!><time="16:19:22.341+240" date="04-04-2012" component="ccmsetup" context="" type="3" thread="984" file="httphelper.cpp:942">
    <![LOG[DownloadFileByWinHTTP failed with error 0x87d00280]LOG]!><time="16:19:22.341+240" date="04-04-2012" component="ccmsetup" context="" type="3" thread="984" file="httphelper.cpp:1076">
    <![LOG[CcmSetup failed with error code 0x87d00280]LOG]!><time="16:19:22.341+240" date="04-04-2012" component="ccmsetup" context="" type="1" thread="3496" file="ccmsetup.cpp:9454">
    And in my ccm.log:
    ---> Attempting to connect to administrative share '\\SCCMCLIENTTEST1\admin$' using account 'corporate\sccmadmin'~  $$<SMS_CLIENT_CONFIG_MANAGER><04-04-2012 16:09:19.338+240><thread=2708 (0xA94)>
    ---> The 'best-shot' account has now succeeded 1 times and failed 0 times.  $$<SMS_CLIENT_CONFIG_MANAGER><04-04-2012 16:09:19.400+240><thread=2708 (0xA94)>
    ---> Connected to administrative share on machine SCCMCLIENTTEST1 using account 'corporate\sccmadmin'~  $$<SMS_CLIENT_CONFIG_MANAGER><04-04-2012 16:09:19.400+240><thread=2708 (0xA94)>
    ---> Attempting to make IPC connection to share <\\SCCMCLIENTTEST1\IPC$> ~  $$<SMS_CLIENT_CONFIG_MANAGER><04-04-2012 16:09:19.400+240><thread=2708 (0xA94)>
    ---> Searching for SMSClientInstall.* under '\\SCCMCLIENTTEST1\admin$\'~  $$<SMS_CLIENT_CONFIG_MANAGER><04-04-2012 16:09:19.405+240><thread=2708 (0xA94)>
    ---> System OS version string "6.1.7601" converted to 6.10  $$<SMS_CLIENT_CONFIG_MANAGER><04-04-2012 16:09:19.778+240><thread=2708 (0xA94)>
    CWmi::Connect(): ConnectServer(Namespace) failed. - 0x8004100e~  $$<SMS_CLIENT_CONFIG_MANAGER><04-04-2012 16:09:19.826+240><thread=2708 (0xA94)>
    ---> Unable to connect to WMI (root\ccm) on remote machine "SCCMCLIENTTEST1", error = 0x8004100e

  • Connectivity to Test Controllers and Test Agents in virtual machine

    Hi,
    I’m setting up the load test infrastructure- configured test controller and test agent on skytap virtual machine (which is windows server 2012). I have configured as below:
    The load tests exist on my machine (TFS 2013) , in test settings I selected – Local execution with remote collection, tried with selecting remote execution, selected the controller, the status shows as connected to controller: ‘XXXXXXXXXXX:6901’
    I have configured the test controller ( TC 2013 )  for load testing, specified logon account as – Local system, since I’m not connecting the TFS in my virtual machine I skipped the Team Project Collection part. The load test database (SQLExpress)
    is connected.
    The Text Agent (TA 2013) also exists on the same virtual machine and is registered with controller. The test agent is running as service , logon as – Network service
    I had checked the services, admin users on my machine and virtual machine, made the firewall exceptions, tried disabling the firewall too, checked the config files for QTController and QTTest Agent(C:\Program Files (x86)\Microsoft Visual Studio 12.0\Common7\IDE)
     for port 6901, I can ping my machine( IP or with DNS) to Virtual machine ( vice versa). I also tried to set the logging – verbose for all TA, TC , devenv config ( however, I could see any logs).
    The machines are in same domain and port 6901 is accessible from local machine.
    When I try to run my load test from my machine it gives the below error:
    Error:     Failed to queue test run 'LoadTests (2015-01-22 15:04:00)': A connection attempt failed because the connected party did not properly respond after a period of time, or established connection failed because connected host
    has failed to respond.             
    I tried troubleshooting with all the online help available, could not find a solution.
    Please help on this.
    Dhillon_H

    Hi Tina-Shi
    Thank you for the response. Please see below my findings and the logs
    - There were no errors while configuring TC, TA on VM , only warnings as below:
    Since you have not configured lab service account, make sure a) test agent can communicate with the test controller, b) test controller and test agent can access the build drop location, and c) Microsoft Test Manager can connect to the test controller
    during manual test runs. Manual steps might be needed to setup the permissions mentioned above.
    -The test Agent is ready status in the Manage Test Controllers Window in the local.testsetings file.
    - The load tests run successfully when I select local execution.
    - I have referred the links mentioned , couldn't find the solution, also sending some content from logs I have on the VM machine where my TC, TA exist.
    - Also, I’m the admin on my TFS machine and VM .
    - TC configuration – as Local system , TA configuration- as network service.
    VSTTAgent.log
    I, 4988, 41, 2015/01/23, 13:17:55.877, XXXXX-XXX-XXXX\QTAgentService.exe, AgentService: Connecting to controller. Using AgentName: XXXXX-XXX-XXXX : Domain : DEVOP.Xxxxx-xxx-xxxx.com
    V, 4988, 32, 2015/01/23, 13:17:55.893, XXXXX-XXX-XXXX\QTAgentService.exe, AgentService: calling AgentObject.Hello
    V, 4988, 32, 2015/01/23, 13:17:55.893, XXXXX-XXX-XXXX\QTAgentService.exe, AgentProcessManager.WaitForDataCollectionAgentProcessToStart: waiting for agents to start.
    V, 4988, 32, 2015/01/23, 13:17:55.893, XXXXX-XXX-XXXX\QTAgentService.exe, AgentProcessManager.WaitForDataCollectionAgentProcessToStart: Agents started.
    V, 4988, 41, 2015/01/23, 13:17:55.893, XXXXX-XXX-XXXX\QTAgentService.exe, AgentProcessManager.PerformActionIgnoringExceptions: Calling 'DataCollectionEnvironmentContext' on the data collection agent
    V, 4988, 41, 2015/01/23, 13:17:55.893, XXXXX-XXX-XXXX\QTAgentService.exe, AgentProcessManager.WaitForDataCollectionAgentProcessToStart: waiting for agents to start.
    V, 4988, 41, 2015/01/23, 13:17:55.893, XXXXX-XXX-XXXX\QTAgentService.exe, AgentProcessManager.WaitForDataCollectionAgentProcessToStart: Agents started.
    V, 4988, 41, 2015/01/23, 13:17:55.893, XXXXX-XXX-XXXX\QTAgentService.exe, AgentProcessManager.PerformActionIgnoringExceptions: Successfully called 'DataCollectionEnvironmentContext' on the data collection agent
    V, 4988, 41, 2015/01/23, 13:17:55.893, XXXXX-XXX-XXXX\QTAgentService.exe, AgentProcessManager.PerformActionIgnoringExceptions: Calling 'DataCollectionEnvironmentContext' on the test agent
    V, 4988, 41, 2015/01/23, 13:17:55.893, XXXXX-XXX-XXXX\QTAgentService.exe, AgentProcessManager.PerformActionIgnoringExceptions: Successfully called 'DataCollectionEnvironmentContext' on the test agent
    I, 4988, 41, 2015/01/23, 13:17:55.893, XXXXX-XXX-XXXX\QTAgentService.exe, AgentService: Successfully connected to controller.
    V, 4988, 41, 2015/01/23, 13:17:55.893, XXXXX-XXX-XXXX\QTAgentService.exe, AgentStatusAggregator.ControllerConnected: Connection to controller XXXXX-XXX-XXXX:6901 has been established.
    V, 4988, 44, 2015/01/23, 13:17:55.893, XXXXX-XXX-XXXX\QTAgentService.exe, AgentProcessManager.PerformActionIgnoringExceptions: Calling 'SetAgentDataCollectorInformation' on the controller
    V, 4988, 44, 2015/01/23, 13:17:55.893, XXXXX-XXX-XXXX\QTAgentService.exe, AgentProcessManager.PerformActionIgnoringExceptions: Successfully called 'SetAgentDataCollectorInformation' on the controller
    EqtTraceAgent.log
    V, 568, 1, 2015/01/23, 12:28:31.395, XXXXX-XXX-XXXX\QTDCAgent32.exe, Agent XXXXX-XXX-XXXX: created Controller Event Sink
    V, 568, 1, 2015/01/23, 12:28:31.395, XXXXX-XXX-XXXX\QTDCAgent32.exe, DataCollectionAgentObject: starting state machine on different thread.
    V, 568, 1, 2015/01/23, 12:28:31.395, XXXXX-XXX-XXXX\QTDCAgent32.exe, StateMachine(DataCollectionAgentState): SetNextState Online called
    V, 568, 7, 2015/01/23, 12:28:31.395, XXXXX-XXX-XXXX\QTDCAgent32.exe, StateMachine(DataCollectionAgentState): In state Online. Waiting for state change...
    V, 568, 7, 2015/01/23, 12:28:31.395, XXXXX-XXX-XXXX\QTDCAgent32.exe, StateMachine(DataCollectionAgentState): Exit wait for state change, current state is Online.
    V, 568, 7, 2015/01/23, 12:28:31.395, XXXXX-XXX-XXXX\QTDCAgent32.exe, StateMachine(DataCollectionAgentState): Uninitialized => Online
    V, 568, 7, 2015/01/23, 12:28:31.395, XXXXX-XXX-XXXX\QTDCAgent32.exe, StateMachine(DataCollectionAgentState): calling state handler for Online
    V, 568, 7, 2015/01/23, 12:28:31.395, XXXXX-XXX-XXXX\QTDCAgent32.exe, StateMachine(DataCollectionAgentState): In state Online. Waiting for state change...
    V, 568, 1, 2015/01/23, 12:28:31.395, XXXXX-XXX-XXXX\QTDCAgent32.exe, DataCollectorWatcher: DataCollectorDiscoveryPeriod set to: 5000
    V, 568, 1, 2015/01/23, 12:28:31.395, XXXXX-XXX-XXXX\QTDCAgent32.exe, DataCollectorWatcher.Start: Starting to watch for changes in the data collector files.
    V, 568, 1, 2015/01/23, 12:28:31.395, XXXXX-XXX-XXXX\QTDCAgent32.exe, DataCollectionAgentObject: constructor is done, success.
    I, 568, 1, 2015/01/23, 12:28:31.395, XXXXX-XXX-XXXX\QTDCAgent32.exe, DataCollectionAgentProcess: Calling into AgentService to register the agent.
    V, 568, 8, 2015/01/23, 12:28:31.395, XXXXX-XXX-XXXX\QTDCAgent32.exe, DataCollectorCache.ForceCacheUpdate: Performing data collector discovery.
    I, 568, 1, 2015/01/23, 12:28:31.411, XXXXX-XXX-XXXX\QTDCAgent32.exe, DataCollectionAgentProcess: Successfully registered data collection agent process.
    I, 568, 1, 2015/01/23, 12:28:31.411, XXXXX-XXX-XXXX\QTDCAgent32.exe, DataCollectionAgentProcess: waiting for shutdown notification.
    V, 568, 8, 2015/01/23, 12:28:32.192, XXXXX-XXX-XXXX\QTDCAgent32.exe, DataCollectorCache.ForceCacheUpdate: Done performing data collector discovery.
    V, 568, 10, 2015/01/23, 12:28:32.458, XXXXX-XXX-XXXX\QTDCAgent32.exe, DataCollectionAgentObject: Hello.
    V, 568, 10, 2015/01/23, 12:28:32.458, XXXXX-XXX-XXXX\QTDCAgent32.exe, DataCollectionEnvironmentContext: Adding Agent Process URI ipc://eqt-f0f6cfb9-454f-4e8a-c857-170546772b6e/
    V, 568, 25, 2015/01/23, 12:38:33.345, XXXXX-XXX-XXXX\QTDCAgent32.exe, DataCollectionAgentObject: Hello.
    V, 568, 25, 2015/01/23, 12:38:33.345, XXXXX-XXX-XXXX\QTDCAgent32.exe, DataCollectionEnvironmentContext: Adding Agent Process URI ipc://eqt-f0f6cfb9-454f-4e8a-c857-170546772b6e/
    V, 568, 33, 2015/01/23, 12:48:32.667, XXXXX-XXX-XXXX\QTDCAgent32.exe, DataCollectionAgentObject: Hello.
    V, 568, 53, 2015/01/23, 12:48:32.667, XXXXX-XXX-XXXX\QTDCAgent32.exe, DataCollectionEnvironmentContext: Adding Agent Process URI ipc://eqt-f0f6cfb9-454f-4e8a-c857-170546772b6e/
    V, 568, 54, 2015/01/23, 12:58:33.943, XXXXX-XXX-XXXX\QTDCAgent32.exe, DataCollectionAgentObject: Hello.
    V, 568, 54, 2015/01/23, 12:58:33.943, XXXXX-XXX-XXXX\QTDCAgent32.exe, DataCollectionEnvironmentContext: Adding Agent Process URI ipc://eqt-f0f6cfb9-454f-4e8a-c857-170546772b6e/
    EqtTraceController.log
    V, 2608, 20, 2015/01/23, 13:08:10.287, XXXXX-XXX-XXXX\QTController.exe, ControllerObject: Hello
    V, 2608, 20, 2015/01/23, 13:08:11.302, XXXXX-XXX-XXXX\QTController.exe, User XXXXX-XXX-XXXX\dhilloha is system, Admin, or controller user
    I, 2608, 20, 2015/01/23, 13:08:11.302, XXXXX-XXX-XXXX\QTController.exe, ControllerObject: Creating ControllerExecution for TestRun 9f0e53e4-09da-40f4-90d8-01bdaeec7365
    I, 2608, 20, 2015/01/23, 13:08:11.318, XXXXX-XXX-XXXX\QTController.exe, ControllerSpooledJob: creating spooled job for test run 'LoadTests (2015-01-23 13:08:08)'
    I, 2608, 20, 2015/01/23, 13:08:11.318, XXXXX-XXX-XXXX\QTController.exe, ControllerObject: Queuing TestRun 9f0e53e4-09da-40f4-90d8-01bdaeec7365
    V, 2608, 22, 2015/01/23, 13:12:54.566, XXXXX-XXX-XXXX\QTController.exe, ControllerObject.RequireAgentServiceUser: Agent: XXXXX-XXX-XXXX of environment [Default] trying to connect.
    V, 2608, 22, 2015/01/23, 13:12:54.566, XXXXX-XXX-XXXX\QTController.exe, ControllerObject: AgentHello from XXXXX-XXX-XXXX
    V, 2608, 22, 2015/01/23, 13:12:54.566, XXXXX-XXX-XXXX\QTController.exe, Verifying the connection integrity for following number of objects: 1
    V, 2608, 24, 2015/01/23, 13:17:54.596, XXXXX-XXX-XXXX\QTController.exe, Agent : NT AUTHORITY\NETWORK SERVICE
    V, 2608, 24, 2015/01/23, 13:17:54.596, XXXXX-XXX-XXXX\QTController.exe, ControllerObject.RequireAgentServiceUser: Agent: XXXXX-XXX-XXXX of environment [Default] trying to connect.
    V, 2608, 24, 2015/01/23, 13:17:54.596, XXXXX-XXX-XXXX\QTController.exe, User NT AUTHORITY\NETWORK SERVICE is in group TeamTestAgentService.
    I, 2608, 24, 2015/01/23, 13:17:54.596, XXXXX-XXX-XXXX\QTController.exe, A user has successfully authenticated to obtain the ControllerObject.
    V, 2608, 23, 2015/01/23, 13:17:55.877, XXXXX-XXX-XXXX\QTController.exe, ControllerObject.ConnectAgent: Agent: XXXXX-XXX-XXXX from machine: xxxxx-xxx-xxxx.DEVOP.Xxxxx-xxx-xxxx.com trying to connect.
    V, 2608, 23, 2015/01/23, 13:17:55.877, XXXXX-XXX-XXXX\QTController.exe, ControllerObject.RequireAgentServiceUser: Agent: XXXXX-XXX-XXXX of environment [Default] trying to connect.
    V, 2608, 23, 2015/01/23, 13:17:55.877, XXXXX-XXX-XXXX\QTController.exe, User NT AUTHORITY\NETWORK SERVICE is in group TeamTestAgentService.
    I, 2608, 23, 2015/01/23, 13:17:55.877, XXXXX-XXX-XXXX\QTController.exe, AgentDomainTrusted : Controller Domain DEVOP.Xxxxx-xxx-xxxx.com Agent Domain DEVOP.Xxxxx-xxx-xxxx.com
    I, 2608, 23, 2015/01/23, 13:17:55.877, XXXXX-XXX-XXXX\QTController.exe, AgentDomainTrusted : Same domain DEVOP.Xxxxx-xxx-xxxx.com
    I, 2608, 23, 2015/01/23, 13:17:55.877, XXXXX-XXX-XXXX\QTController.exe, ControllerObject.ConnectAgent : Ignoring the identity
    V, 2608, 27, 2015/01/23, 13:17:55.893, XXXXX-XXX-XXXX\QTController.exe, Successfully verified connection for agent XXXXX-XXX-XXXX
    I, 2608, 23, 2015/01/23, 13:17:55.893, XXXXX-XXX-XXXX\QTController.exe, AgentManager: Agent 'XXXXX-XXX-XXXX' successfully connected.
    V, 2608, 23, 2015/01/23, 13:17:55.893, XXXXX-XXX-XXXX\QTController.exe, Verifying the connection integrity for following number of objects: 1
    V, 2608, 23, 2015/01/23, 13:17:55.893, XXXXX-XXX-XXXX\QTController.exe, ControllerObject.ConnectAgent: Agent: XXXXX-XXX-XXXX Returning.
    V, 2608, 24, 2015/01/23, 13:17:55.893, XXXXX-XXX-XXXX\QTController.exe, ControllerObject.RequireAgentServiceUser: Agent: XXXXX-XXX-XXXX of environment [Default] trying to connect.
    V, 2608, 29, 2015/01/23, 13:19:13.442, XXXXX-XXX-XXXX\QTController.exe, User XXXXX-XXX-XXXX\dhilloha is system, Admin, or controller user
    I, 2608, 29, 2015/01/23, 13:19:13.442, XXXXX-XXX-XXXX\QTController.exe, A user has successfully authenticated to obtain the ControllerObject.
    V, 2608, 28, 2015/01/23, 13:19:14.114, XXXXX-XXX-XXXX\QTController.exe, ControllerObject: Hello
    V, 2608, 28, 2015/01/23, 13:19:14.364, XXXXX-XXX-XXXX\QTController.exe, User XXXXX-XXX-XXXX\dhilloha is system, Admin, or controller user
    V, 2608, 28, 2015/01/23, 13:19:16.270, XXXXX-XXX-XXXX\QTController.exe, User XXXXX-XXX-XXXX\dhilloha is system, Admin, or controller user
    V, 2608, 28, 2015/01/23, 13:19:16.489, XXXXX-XXX-XXXX\QTController.exe, User XXXXX-XXX-XXXX\dhilloha is system, Admin, or controller user
    V, 2608, 32, 2015/01/23, 13:22:54.593, XXXXX-XXX-XXXX\QTController.exe, ControllerObject.RequireAgentServiceUser: Agent: XXXXX-XXX-XXXX of environment [Default] trying to connect.
    V, 2608, 32, 2015/01/23, 13:22:54.593, XXXXX-XXX-XXXX\QTController.exe, ControllerObject: AgentHello from XXXXX-XXX-XXXX
    V, 2608, 32, 2015/01/23, 13:22:54.593, XXXXX-XXX-XXXX\QTController.exe, Verifying the connection integrity for following number of objects: 1
    VSTTController.log
    V, 2608, 23, 2015/01/23, 13:17:55.877, XXXXX-XXX-XXXX\QTController.exe, ControllerObject.RequireAgentServiceUser: Agent: XXXXX-XXX-XXXX of environment [Default] trying to connect.
    V, 2608, 23, 2015/01/23, 13:17:55.877, XXXXX-XXX-XXXX\QTController.exe, User NT AUTHORITY\NETWORK SERVICE is in group TeamTestAgentService.
    I, 2608, 23, 2015/01/23, 13:17:55.877, XXXXX-XXX-XXXX\QTController.exe, AgentDomainTrusted : Controller Domain DEVOP.Xxxxx-xxx-xxxx.com Agent Domain DEVOP.Xxxxx-xxx-xxxx.com
    I, 2608, 23, 2015/01/23, 13:17:55.877, XXXXX-XXX-XXXX\QTController.exe, AgentDomainTrusted : Same domain DEVOP.Xxxxx-xxx-xxxx.com
    I, 2608, 23, 2015/01/23, 13:17:55.877, XXXXX-XXX-XXXX\QTController.exe, ControllerObject.ConnectAgent : Ignoring the identity
    V, 2608, 27, 2015/01/23, 13:17:55.893, XXXXX-XXX-XXXX\QTController.exe, Successfully verified connection for agent XXXXX-XXX-XXXX
    I, 2608, 23, 2015/01/23, 13:17:55.893, XXXXX-XXX-XXXX\QTController.exe, AgentManager: Agent 'XXXXX-XXX-XXXX' successfully connected.
    V, 2608, 23, 2015/01/23, 13:17:55.893, XXXXX-XXX-XXXX\QTController.exe, Verifying the connection integrity for following number of objects: 1
    V, 2608, 23, 2015/01/23, 13:17:55.893, XXXXX-XXX-XXXX\QTController.exe, ControllerObject.ConnectAgent: Agent: XXXXX-XXX-XXXX Returning.
    V, 2608, 24, 2015/01/23, 13:17:55.893, XXXXX-XXX-XXXX\QTController.exe, ControllerObject.RequireAgentServiceUser: Agent: XXXXX-XXX-XXXX of environment [Default] trying to connect.
    V, 2608, 29, 2015/01/23, 13:19:13.442, XXXXX-XXX-XXXX\QTController.exe, User XXXXX-XXX-XXXX\dhilloha is system, Admin, or controller user
    I, 2608, 29, 2015/01/23, 13:19:13.442, XXXXX-XXX-XXXX\QTController.exe, A user has successfully authenticated to obtain the ControllerObject.
    V, 2608, 28, 2015/01/23, 13:19:14.114, XXXXX-XXX-XXXX\QTController.exe, ControllerObject: Hello
    V, 2608, 28, 2015/01/23, 13:19:14.364, XXXXX-XXX-XXXX\QTController.exe, User XXXXX-XXX-XXXX\dhilloha is system, Admin, or controller user
    V, 2608, 28, 2015/01/23, 13:19:16.270, XXXXX-XXX-XXXX\QTController.exe, User XXXXX-XXX-XXXX\dhilloha is system, Admin, or controller user
    V, 2608, 28, 2015/01/23, 13:19:16.489, XXXXX-XXX-XXXX\QTController.exe, User xxxxxxxx\dhilloha is system, Admin, or controller user
    Thanks you for looking into this.
    Dhillon_H

  • Connection problems with DI-SERVER 2007 & B1WS from remote machine

    Hi,
    Can you please help us better understand what the issue is, and how to solve it?
    I am seeking to get B1WS working on remote machines.
    I have built a small test application, which works fine on the server which also hosts the SQL Server instance and IIS.
    When I move the application to another machine, no connection happens, and it always throws this error:
    Message: 
    "Unable to connect to the remote server"
    Inner Exception:
    "No connection could be made because the target machine actively refused it 127.0.0.1:80"
    Error Code:
    10061
    This configuration works:
    Licensing Server:  Server A
    Database Server:  Server B
    IIS Server (B1WS):  Server B
    Running App:  Server B
    This configuration does not work:
    Licensing Server:  Server A
    Database Server:  Server B
    IIS Server (B1WS): Server B
    Running App:  Workstation C
    I have checked permissions on the web services folder, and gave Everyone all permissions.  The same connection problems persists.
    All help is welcome!
    Thank you in advance,
    Mike

    Dear Michael Gurevich,
    Was resolved?
    Thanks.
    João Paulo

  • Error "Test Agent could not connect to the test controller" while configuring the Test Agent on Client machine

    Hi,
    I am getting an Error “Test Agent could not connect to the test controller”
     while configuring The Test Agent on Client machine.
    Pre-requisite used:  
    VS2012 update 4, Test agent & Test controller of same version used
    User has TFS admin access.
    Same user id used for configuring Test Agent.
    Description:
    Test controller is installed on server A. I want to install test agent on client machine B.
    Windows Fire wall is OFF on both Machines A & B. While configuring Test Agent below error is occurred:
    “Test Agent could not connect to the test controller”
    In log file error was “I, 2015/04/02, 15:32:21.723, Could not get the status from the test agent. Exception: Failed to connect to an IPC Port: The system cannot find the file specified.”
    In Event viewer below error details given:
    Unable to connect to the controller on ‘My Server: 6901’. The agent can connect to the controller but the controller cannot connect to the agent because of following reason: The requested name is valid, but no data of the requested type was found.
    Make sure that the firewall on the test agent machine is not blocking the connection.
    Could you please help me to find solution?
    Thanks in advance!
    Kanchan M
    Kanchan

    Hi Kanchan,
    So on each computer, you create a local user account that is a member of the Administrators group, and use the same account and password on each machine(controller and Agent), am I right?
    Could you enable the detailed log message?
    http://blogs.msdn.com/b/aseemb/archive/2010/03/07/how-to-enable-test-agent-logs.aspx
    http://blogs.msdn.com/b/aseemb/archive/2009/11/28/how-to-enable-test-controller-logs.aspx
    >>In log file error was “I, 2015/04/02, 15:32:21.723, Could not get the status from the test agent. Exception: Failed to connect to an IPC Port: The system cannot find the file specified.”I
    met a similar issue before which was related to the Firewall exceptions, maybe you could refer to it here:
    http://stackoverflow.com/questions/12249093/test-agent-could-not-connect-to-the-test-controller-vs2012-agents
    Best Regards,
    Jack
    We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
    Click
    HERE to participate the survey.

  • Java code to connect to remote windows machine from local machine

    Hi,
    I have developed a code to connecting remote windows M/C from local M/C by using SSH2 (ganymed-ssh2-build209.jar) API. when I run the code its giving below error. Can any one please help me how to resolve it. And also please let me know, is there any other way to connect remote windows system using java code.
    Exception.
    java.io.IOException: There was a problem while talking to <host name>:22
      at ch.ethz.ssh2.Connection.connect(Connection.java:642)
      at ch.ethz.ssh2.Connection.connect(Connection.java:460)
      at Connect.RemoteServer.ConnectWindowsServer.runCommand(ConnectWindowsServer.java:55)
      at Connect.RemoteServer.ConnectWindowsServer.main(ConnectWindowsServer.java:27)
    Caused by: java.net.ConnectException: Connection refused: connect
      at java.net.PlainSocketImpl.socketConnect(Native Method)
      at java.net.PlainSocketImpl.doConnect(Unknown Source)
      at java.net.PlainSocketImpl.connectToAddress(Unknown Source)
      at java.net.PlainSocketImpl.connect(Unknown Source)
      at java.net.SocksSocketImpl.connect(Unknown Source)
      at java.net.Socket.connect(Unknown Source)
      at ch.ethz.ssh2.transport.TransportManager.initialize(TransportManager.java:299)
      at ch.ethz.ssh2.Connection.connect(Connection.java:591)
      ... 3 more
    JAVA Code
    import ch.ethz.ssh2.Connection;
    import ch.ethz.ssh2.Session;
    public void setAuthenticationInfo(String hostname, String username,String password) {
           this.host = hostname;
           this.userid = username;
           this.password = password;      
           this.recentCommand = "";     
           System.out.println("setting authentication info completed for host=" + host );
      public void runCommand() throws Exception {
    try{
            // Setup ssh session with endpoint
           System.out.println("starting connection with " + host);
           Connection connection = new Connection(host);
           System.out.println("connection object created..");
           connection.connect();
           System.out.println("Connect to connection");
           connection.authenticateWithPassword(userid,password);
           System.out.println(connection.isAuthenticationComplete());
           Session session = connection.openSession();
          System.out.println("connected");
      }catch (Exception e) {
      e.printStackTrace();
    Regards,
    Praveen

    Hi baftos,
    I tried to telnet remote windows machine from my local machine on port 23, its not connected and given error message like "Connect failed".
    As your response, if we can telnet to remote windows machine from local machine then we can connect from Java. Is it correct ?.
    Can you please help me to resolve this issue. And also please confirm the port (23) is correct, which I was used to connect remote machine from telnet.
    Regards,
    Praveen

Maybe you are looking for

  • How do I set up my time capsule with my PC and BT home hub

    Hi, I really need help. I have a new time machine I am having trouble setting up. I have a BT Home Hub that I have hard wired to the TC to the WAN port. I have Connected my PC to the Ethernet port. The PC will not find the TC. I also need to Wi-Fi at

  • Bean connections in session

    If I have two managed bean objects (Bean1 and Bean2), both in the session, how does one refer to the other? Say a method in Bean1 wants to reference a setter in Bean2 -- I don't want to initialize a new Bean2, but I want to use the Bean2 object alrea

  • Why is compressor 4.1.1 only giving me mp4s with 128kbps audio?

    Hi everyone, I'm using the mp4 encoders a lot in Compressor. It recently was updated to 4.1.1 and the OS to Mavericks 10.9.2. The bitrate slider in the settings has absolutely no effect on the resulting file regardless of the source file and the sett

  • Need help getting speaker inputs to work please.

    I'm trying to have my auido reciever and computer speakers hooked up to my computer at the same time so when I watch recorded shows off my computer i can have the sound come out of my surrouns sound speakers. The only problem is i don't have an input

  • Select and Use Data Points Script

    Hello, I have developed a script that conditions data however to automate the process further I would need assistance with a strategy to select the data conditioning start point.  What I mean by this is I have a piece of raw data that say has 2 event