Test report must filter test failures to top of report.

Hello All,
I currently run lots of small labview tests and generate a long HTML report with the results. Engineers are requesting the failures filter to the top of the report as they want to quickly see the fails. I am hoping this functionality can be set from testand without having to rejig each test in the test suite.
Advice appreciated.
Regards
Chris

Hi,
Another way is to modify the "Failure chain" list in the UUT header so that it displays all failed steps.
See http://zone.ni.com/devzone/conceptd.nsf/webmain/4DF435CA73213F7C86256A56006CA55E. This example describes howtoo for TS 2.0. I've done it with TS 3.1 also.
Message Edited by Virinco-TomC on 08-26-2006 01:01 PM
Regards
Tom Andres Lomsdalen, CTD

Similar Messages

  • Unit testing and system integration testing for crystal report

    Hi gurus,
           I am creating crystal report by oracle procedure, will you please tell me how to do unit testing and system integration testing? appreciate very much.

    The focus of this forum is report design. The actual testing of reports would be subject to your own internal policies and procedures.
    Jason

  • Error when I run report RSCMST to test the content server.

    when I run report "RSCMST" to test the my content server.    I get the error:
    header        HTTP/1.1 401 Authorization Required
                  date: Fri, 05 Dec 2008 20:20:45 GMT
                  server: Apache/1.3.41 (Unix) SAPCS/640
                  x-servertime: 20:20:45
                  x-query: create&pVersion=0046&contRep=ZTEST001&docId=020D3949CA03445AE10000000A14022B&compId=data&docPro ..
                  t=rud&accessMode=c&authId=CN%3DCPJ&expiration=20081205142027&secKey=MIH3BgkqhkiG9w0BBwKggekwgeYC
                  x-serverdate: 2008-12-05
                  x-pversion: 0046
                  x-errordescription: URI signature has expired
                  x-serverid: server="content01.ivo.com.cn";serverPort="1090"
                  x-servertype: SAP HTTP Content Server
                  content-length: 752
                  connection: close
                  content-type: text/plain
                  ~remote_addr:
                  ~uri_scheme_expanded: NONE
    want                 201
    bad           401
    time              17.974
    It seems that the "bad 401" means a http error.    I do not know how to configure it ?
    my content server uses the maxdb,  and http is apache, they are all running on redhat linux ese 5
    who can give me some advices?  thanks

    Victor,
            Looks like a web server authentication issue. I suggest you raise this issue in a basis/ web application server forum,
    Sojan

  • Error 401 when run report "RSCMST" to test my content server

    when I run report "RSCMST" to test the my content server. I get the error:
    header HTTP/1.1 401 Authorization Required
    date: Fri, 05 Dec 2008 20:20:45 GMT
    server: Apache/1.3.41 (Unix) SAPCS/640
    x-servertime: 20:20:45
    x-query: create&pVersion=0046&contRep=ZTEST001&docId=020D3949CA03445AE10000000A14022B&compId=data&docPro ..
    t=rud&accessMode=c&authId=CN%3DCPJ&expiration=20081205142027&secKey=MIH3BgkqhkiG9w0BBwKggekwgeYC
    x-serverdate: 2008-12-05
    x-pversion: 0046
    x-errordescription: URI signature has expired
    x-serverid: server="content01.ivo.com.cn";serverPort="1090"
    x-servertype: SAP HTTP Content Server
    content-length: 752
    connection: close
    content-type: text/plain
    ~remote_addr:
    ~uri_scheme_expanded: NONE
    want 201
    bad 401
    time 17.974
    It seems that the "bad 401" means a http error. I do not know how to configure it ?
    my content server uses the maxdb, and http is apache, they are all running on redhat linux ese 5
    who can give me some advices? thanks

    hello,
    I am also getting same problem with newly installed content server.
    I have defined connectivity through CSADMIN. but when I 'm running this report I 'm getting same
    time (-93) problem.
    Could you please tell me how you rectified time zone setting problem..
    would be great help..
    Regards
    Anju

  • I have created a form & added it to my website. It tests ok but....on top of the the form is a message ....An error has occured.....What is the error and how do I find It ?

    I have created a form & added it to my website. It tests ok but....on top of the the form is a message ....An error has occured.....What is the error and how do I find It ?
    REM

    There are various was to return a filled-in PDF form but many require some detailed information about what product the person filling in the form will be using.
    As noted above the form can be filled out and faxed or snail mailed to you.
    Since Acrobat 3 the form could be submitted to a scripted web page and have the web server perform the tasks necessary to return the data to you.
    Since Acrobat 6 the creator could add special "Extended Form Rights" to the form so users with Reader version 5 or better could save the form and email the form.
    For mobile devices the app the user will be using will determine how or if the form can be returned.
    Do not allow users to use Apple's Preview application on the Macintosh. It will corrupt the form in many ways.

  • No HCK test for ndis filter driver in server 2008 R2

    I am running HCK 2.1 to test my ndis filter driver.
    1. The testing client is running server 2008 R2.
    2. The driver is built for win7 x64 with vs 2012.
    However, there is no test avaiable in the HCK console. Even I choose "Add Features" in "devices and printers" or "software devices", I still can not find the proper tests. But
    if I build the driver for win8 x64 and run the tests in server 2012, the "ndis 6.5 logo test" shows up. 
    Now I do need a signature for win7 and 2008 R2. 
    Does anyone know how to add "ndis logo test" for win7 in HCK 2.1?

    anyone can help?

  • IPlanet 6.0 And servlet filters with filter-test.war not working

    Hi, I am trying to get servlet filters running on iPlanet6.0. I deployed the 'filter-test.war' file, and then modified web-apps.xml to contain the filter configuration. I even modified the example classes to log to a file on disk. The only thing that happens is intialization. Further it never get's to call the 'doFilter' method at all.
    Is there anything I'm missing?
    All I did was deploy the war file, and then modify the web-apps.xml file, and then restart the server. Is there anything else?
    Here is my web-apps.xml file as been modified.
    <?xml version="1.0" encoding="UTF-8"?>
    <!DOCTYPE vs PUBLIC "-//Sun Microsystems, Inc.; iPlanet//DTD Virtual Server Web Applications 6.0//EN"
         "http://developer.iplanet.com/webserver/dtds/iws-webapps_6_0.dtd">
    <vs>
    <web-app uri="/" enable="true"/>
    <web-app uri="/filter-test" dir="C:/temp/iplanet/deployed" enable="true">
    <!-- Define servlet-mapped and path-mapped example filters -->
    <filter>
    <filter-name>Servlet Mapped Filter</filter-name>
    <filter-class>filters.ExampleFilter</filter-class>
         <init-param>
         <param-name>attribute</param-name>
         <param-value>filters.ExampleFilter.SERVLET_MAPPED</param-value>
         </init-param>
    </filter>
    <filter>
    <filter-name>Path Mapped Filter</filter-name>
    <filter-class>filters.ExampleFilter</filter-class>
         <init-param>
         <param-name>attribute</param-name>
         <param-value>filters.ExampleFilter.PATH_MAPPED</param-value>
         </init-param>
    </filter>
    <filter>
    <filter-name>Request Dumper Filter</filter-name>
    <filter-class>filters.RequestDumperFilter</filter-class>
    </filter>
    <filter-mapping>
    <filter-name>Servlet Mapped Filter</filter-name>
         <servlet-name>invoker</servlet-name>
    </filter-mapping>
    <filter-mapping>
    <filter-name>Path Mapped Filter</filter-name>
         <url-pattern>/servlet/*</url-pattern>
    </filter-mapping>
    <filter-mapping>
    <filter-name>Request Dumper Filter</filter-name>
         <url-pattern>/servlet/*</url-pattern>
    </filter-mapping>
    </web-app>
    </vs>
    Thank you

    Why not try WS 6.1 -- which has the full support for Servlet 2.3 including filters.
    As for 6.0, what URI do you use? Is it:
    /filter-test/servlet/<servlet-name>

  • How can we report off of Test Run Custom Fields in e-Manager?

    I'm trying to create reports within Crystal Reports or via SQL Reporting Services to report on test runs and I want to include data from the test run custom fields I've created. I can not find a correlation to link the test runs and the test run custom fields in the DB. Is this even possible?
    I can see the related custom field data in e-Manager for each run history. I was thinking there should be some sort of table in the DB to link the data but I can not find it.
    Please help
    Thanks

    You cannot get this from the interface. We added SqlServer Management Studio Express and granted read only access to project managers. They found the view dbo.View_Tests useful in that it connected custom fields to the test cases. There are similar views for requirements and test runs.
    Studio Express is found: http://www.microsoft.com/downloads/details.aspx?familyid=C243A5AE-4BD1-4E3D-94B8-5A0F62BF7796&displaylang=en#QuickInfoContainer
    You'll need to get access from your DBA and set up an ODBC connection.
    Here's a sample query that we've used -- probably doesn't fit your situation but it might get you thinking. Part of it was stolen from another posting to QA zone -- so I figured -- might as well share the wealth:
    -- Overall input parameters:
    declare @project as integer;
    set @project = '20'
    declare @iteration as varchar(500);
    set @iteration = 'Iteration 1';
    declare @team as varchar(500);
    set @team = 'SFS';
    -- Data on a particular iteration
    declare @iteration_tests_run as decimal(10,2);
    set @iteration_tests_run = ( select count(*)
                             from dbo.View_Tests A
                             where A.ProjectID = @project
                             and A.Iteration = @iteration
                             and A.Team_test <> 'NULL'
                             and A.LastResult <> 'Not Run');
    declare @iteration_tests_passed as decimal(10,2);
    set @iteration_tests_passed=( select count(*)
                             from dbo.View_Tests A
                             where A.ProjectID = @project
                             and A.Iteration = @iteration
                             and A.Team_test <> 'NULL'
                             and A.LastResult = 'Passed');
    declare @iteration_any_results as decimal(10,2);
    set @iteration_any_results=( select count(*)
              from dbo.View_Tests A
              where A.ProjectID = @project
              and A.Team_test <> 'NULL');
    -- Data on a particular team's tests for a particular iteration
    declare @team_tests_run_by_iteration as decimal(10,2);
    set @team_tests_run_by_iteration = (
    select count(*)
                             from dbo.View_Tests A
                             where A.ProjectID = @project
                             and A.Team_test = @team
                             and A.Iteration = @iteration
                             and A.LastResult <> 'Not Run');
    declare @team_tests_passed_by_iteration as decimal(10,2);
    set @team_tests_passed_by_iteration = (
                             select count(*)
                             from dbo.View_Tests A
                             where A.ProjectID = @project
                             and A.Iteration = @iteration
                             and A.Team_test = @team
                             and A.LastResult = 'Passed');
    declare @team_tests_any_results_by_iteration as decimal(10,2);
    set @team_tests_any_results_by_iteration = (
    select count(*)
                             from dbo.View_Tests A
                             where A.ProjectID = @project
    and A.iteration = @iteration
                             and A.Team_test = @team );
    -- Progress in completion and success of tests in a particular iteration
    select (@iteration_tests_run / @iteration_any_results ) * 100 as Iteration_1_percent_complete;
    select (@iteration_tests_passed / @iteration_tests_run ) * 100 as Iteration_1_percent_success;
    -- Progress in completion and success of tests for a particular test team in a particular iteration
    select (@team_tests_run_by_iteration / @team_tests_any_results_by_iteration ) * 100 as SFS_percent_complete_Iteration_1;
    select (@team_tests_passed_by_iteration / @team_tests_run_by_iteration ) * 100 as SFS_percent_success_Iteration_1;

  • With secondary dut machine, must i test all or only failed test in first dut?

    I tested a device with DUT(device under test) pc.
    In USB tests, 4 tests failed because these tests need USB2 - HighSpeedBehavior feature and DUT pc has only XHCI.In DeviceManager displays EHCI node, but the device connected with USB2 port is resided under USB3 XHCI node in DeviceManager. (This pc has 6
    USB2 ports and 4 USB3 ports.)
    So, I set up 2nd DUT pc(dut2) that has only USB2ports.
    With dut2 pc, must i test all, or only failed tests ?

    Hi s.suzawa,
    If you just reconnect your test device on another PC with USB2 port, which connected with USB3 port,
    you can apply distributed testing methdology to merge several PCs results.
    Refer the URL below in detail for distributed testing.
    https://msdn.microsoft.com/en-us/library/windows/hardware/dn260167.aspx?f=255&MSPPError=-2147217396
    YoYamada

  • Custom Filter in Universe on top of BEX Query is not working in BO Explorer?

    Hi,
    I have created Condition(Filter) for an Dimension Object "Submitted by Group Hierarchy" in Universe designer tool on top of SAP BEx Query and then exported the universe to Repository.
    <FILTER KEY="@Select(Submitted By Group Hierarchy\L01 Submitted By Group Hierarchy).[TECH_NAME]"><CONDITION OPERATORCONDITION="InList"><CONSTANT CAPTION="@Prompt('Submitted By Group ','A',' Submitted By Group Hierarchy\L01 Submitted By Group Hierarchy',multi,primary_key,,{‘Direct Sales’)"/></CONDITION></FILTER>
    To test my custom filter , I have created WEBI report and its allowing input entry in my custom filter and output is also coming .
    where as in Explorer, i am not able to enter input values for my custom filter as below.
    Can anyone suggest me how to create custom filter in universe and use it in explorer.
    Thanks in advance.
    Regards,
    Ramana.

    Hi Ramana,
    Please try using 'mono' in place of multi in @prompt syntax and then test.
    Regards,
    Pranay Sharma

  • Error: Your request could not be completed because a failure occurred while the report was being processed.

    Post Author: sagimann
    CA Forum: Deployment
    Hello,
    I'm not sure if this is due to bad deployment, but I suspect it is, at least due to bad environment.
    My env is:
    Solaris 10 64 bit
    Oracle 10g client installed under /opt/oracle/app/oracle/product/10.2.0/client_1
    BOXIR2 + FP2.6 installed under /opt/reporting, running under user 'bouser'. by the way, 'tnsping' works via that user.
    Important bouser env:
    ORACLE_HOME=/opt/oracle/app/oracle/product/10.2.0/client_1
    TNS_ADMIN=$ORACLE_HOME/network/admin
    LD_LIBRARY_PATH=$ORACLE_HOME/lib:$ORACLE_HOME/lib32
    I reboot the box, then start BO like so:
    cd /opt/reporting/bobje
    . setup/env.sh
    ./mysqlstartup.sh
    ./startservers
    ./tomcatstartup
    Then, I import a BIAR file with some reports, and whenever I try to open any report via infoview, I get a gray error message INSTEAD of the input param form:
    Error:
    Your request could not be completed because a failure occurred while the report was being processed. Please contact your system administrator.
    This does not occur in our BOXIR2 on Windows, which is why I'm guess it's a deployment/env issue. The main obstacle I have is: how do I diagnose this? there's nothing in the bobje/logging folder, nothing in the /var/adm/message file except for the following line:
    May  5 15:23:23 testbox1 boe_pagesd&#91;3865&#93;: &#91;ID 253862 user.error&#93; A failure occurred while the Page Server was processing report 'test report' (id=777) for user Administrator
    pls advise,
    thank you.

    The solution is to turn off the printer preference (bottom of Page Setup screen) in the Crystal Report before uploading to the Server. Thanks to: http://pinchii.com/home/2011/12/error-adding-reports-to-crystal-reports-server/
    The explanation, from a comment in the above linked blog post:
    "To elaborate more on the error, what basically happens is that the Crystal Reports engine tries to get the status of the u201Creport printeru201D aka u201Cdefault printeru201D which was present on the system when the report was created, but the printer does not exist anymore. This causes the Crystal engine to error out. By setting the report to u201CNo Printeru201D, it tells the Crystal Engine not to look for that report printer when opening the report."
    Edited by: abirdman on Feb 3, 2012 9:49 PM

  • Problem "The OLE DB provider for linked server reported an error. The provider reported an unexpected catastrophic failure Cannot fetch a row from OLE DB provider for linked server"

    hi
      i'd like to ask question about linked server.
      my linked server used to work but now when i try to select from linked server i was told "The OLE DB provider for linked server reported an error. The provider reported an unexpected catastrophic failure Cannot fetch a row from OLE DB provider
    for linked server"
      but in fact for test connection i was told "the test connection to the linked server succeeded".
      could  anyone help me? thank u very much
    best regards
    martin

    Hi, 
    In addition to Tracy's post we have to know those answers as well:
    * what provider are you using for the connection
    * what do you connect to
    for example, if someone try to connect to oracle using sql server provider then several simple queries are going to work probably OK, but once you are trying to use T-SQL or any complex SQL query then the errors are starting.
    please post the connection string (without the password!) + the query that you are trying to use.
    [Personal Site] [Blog] [Facebook]

  • Report Issue - A subquery filter may not reference the current report

    Hi,
    I a, trying to create a drill down report - I am getting below error when I drill down from summary report to detail -
    A subquery filter may not reference the current report (or contain a circular reference to any report).
    Error Details
    Error Codes: S6C66RYK:WIF3IYGO
    Recursion limit exceeded in Xml Expression Visitor
    The issue is I have a budget report which will drill down to display amount by each period -
    Jan-10 Feb-10 Mar-10
    1223 123 10
    Now I am trying to display detail GL transactions by clicking the amount field.
    This means summary report should pass period along with amount to display detail GL transactions.
    Please help me to resolve this issue.
    Thanks,
    Poojak

    Explain exactly how you create your 2 reports.
    The second one must have "is prompted" filters if you want it to use the values of the first one.

  • Detail Reports must be Refreshed if Bind Vars are Changed

    I have several "Master / Detail" reports where the Master has columns that are passed to the detail reports as Bind Variables.
    We've noticed that the Detail reports always return the report for the first bind variables sent to the report. To update the detail report based on the new bind variables, the admin must hit the report refresh button at the top of the page.
    For example:
    Master Report A contains a table with two columns, with the first column linked to a Detail Report
    ColA / ColB
    Clicking on ColA passes ColB to the Detail Report. The Detail report uses the bind variable to run a SQL Query.
    If two rows are in the Master Report
    A1 / B1
    A2 / B2
    Clicking A1 creates a correct URL and Detail Report using B1
    Going back to the Master Report and Clicking A2 quickly shows a Detail Report with B1. Using the Refresh Report button generates a Detail Report with B2. Note that the HTTP GET URL is proper and shows B2 in the second parameter.
    Is it pretty standard practice for a GC Administrator to hit the Refresh button on a report?
    Edited by: user11113565 on Dec 15, 2009 9:21 AM

    I'm not sure what you mean by via "the WebCache".
    I am going from browser directly to the management system with nothing in between (nothing but net).
    This does appear to be a framework problem. I've tried several different approaches. I am currently moving to hand generate the URLs to avoid this problem. I will check back if it works. The good thing is that I do not appear to require the reportId to build the URL.
    The goal is to insert event=refresh into the URL GET parameters ... hacking this into the bind parameters didn't work as the framework escapes the URL so the & gets turned into an innocuous escaped parameter.
    Paul

  • Different decimal point character for numeric limit test vs multiple numeric test with database logging

    Hi all,
    I have a problem with decimal point character and database logging.
    I've deselected "Use Localized Decimal Point" in Station Options->Localization. Teststand should now use "." as decimal point character (ignore the "'s).
    When logging to database this is only true for Multiple numeric limit test results, not for Numeric limit test results.
    Numeric limit test results use "," as decimal point character where it should be "."
    I can't trust the localization settings on the PC as different endusers might have different settings.
    Example:
    (STEP_NAME and PROP_RESULT.DATA)
    Numeric limit test 1,50127667932332
    Multiple numeric limit test result_1 1
    Multiple numeric limit test result_2 1
    Multiple numeric limit test result_3 10.0304317
    I've changed the Limits->Numeric format for each test but this change is only applied to the report, not the database result.
    Read the manuals but didn't find anything...
    Have I missed something obvious, or is this some kind of bug?
    Teststand version is 2010.
    Windows versions are XP SP3 and Win7. Same behavior on both OS.

    When something is logged to the database as a number, the database is probably storing it in a way that is independent of any sort of decimal point localization. When you view the items in the database however it is probably going to show you the number based on the current locale settings. This is likely purely cosmetic, for display purposes.
    -Doug

Maybe you are looking for