Test report to check output devices?

Hi,
Is there a test report that will print a page so I can check if the output device is working OK and printing like it should? I have create a output device with a device type but now I would like to check if it's configured OK. Is there something I can print to check that? So resolution, margins etc.
Thanks!

Hi,
Just go to SM50 and press the printing icon there. Is not a large report but you can see the resolution and margins there.
Hope this helps you.

Similar Messages

Output device LOCL is not defined

Hi,
I am getting an error message while executing a report containing smartform
'Output device LOCL is not defined'.
The coding is as follows:
l_s_ssfctrlop-no_dialog = 'X'.
l_s_ssfctrlop-getotf = 'X'.
l_s_output_options-tddest = 'LOCL'.
l_s_output_options-tdnoprint = 'X'.
CALL FUNCTION 'SSF_FUNCTION_MODULE_NAME'
Please let me know what is the issue here.
Thanks,
Soumya.

Hi,
Might be the local printer is not defined. Try using LP01.
To verify for LOCL...
Goto SPAD tcodeFull Administrations>Mention the LOCL in the Output Device I/0 Field.
Regards,
Aditya

Create Output Device through tcode SPAD

Dear Expert,
I would like to create a new output device, but the "Create" option is in grey color.
I have follow the below path to do it, but no luck.
SPADConfigurationoutputdevice-changemode-Create
Could anyone let me know how to do this?
Best rgs,
WF

Hi,
Dont Give any Name for Output Device in initial screen
Give Enter
Now click change mode
Now check Output device->Create

My Apple TV is not working. On tv display, I'm getting unsupported signal. Check your device output. Can anyone help plz.

My Apple TV is not working. On tv display, I'm getting a message 'unsupported signal. Check your device output. ' Can anyone help plz.

connect it to a tv which support full hd and go into the settings and lower the resolution as much as possible and then connect it with your tv once more

Apple TV worked until today. Message says unsupported signal check your output device. I have checked hdmi cable with another device and it's fine. Put on a different tv and same message. Went out yesterday and bought a new Apple TV and same problem.

Apple TV worked until today. Message says unsupported signal check your output device. I have checked hdmi cable with another device and it's fine. Put on a different tv and same message. Went out yesterday and bought a new Apple TV and same problem.

Which TV do you have.
You may wish to try the following:
Press and hold the menu and the up button simultaneously on the remote for six seconds, the Apple TV should then begin to cycle through the various resolutions available to it at 20 second intervals.. If you see a picture appear up on your screen, use the remote to scroll down to the OK option and select it.

Change Output Device Of Report

I have been given a request to change the output device (laser printer) of a report within our SAP system. All I know is the report name (YAPR9876), current output device (BH9J), and requested new output device (THBQ).
How can I go about finding this report and updating its output device.
Thanks in advance.

Hi
There is a section in IM customising under outout determination and printer determination where youn can make settings as to what prints where.
This report must have a setting and when you find it just change the printer
I hope that this helps

Default output device for ALV report

Dear friends,
Here there is a user requirement that he want print a particular ALV report in a
perticular output device. and want to fix that output device for that report instead of changing everytime.
Kindly suggest.
Regards,
Praveen Lobo

Hi,
This way system is expected to search for default printer. What I would recommend you to do is call transaction SP01 within the report and pass the initial screen parameter thru FM.
Hope this lead, help you solve your issue!
Reetesh

Emailing SAP standard report using output device ZPDF1

I have two questions regarding the ability to email a standard SAP report.
The user community has been using the action box in tran QM02 to create a corrective action (8D) report. The action box triggers FM QM06_FM_TASK_REQUEST_8DREPORT and QM06_REQUEST_8D_REPORT_STEP2. This process not only creates the report but creates a task in the notification that the report has been generated. The process pops up the PRINT options box to choose various setting including output device. They will then print the report, scan this hardcopy report and email it to the vendor.
We recently showed them a more streamlined process to emailing the report. When the PRINT popup appears, they fill in the output device with ZPDF1 and hit enter. This brings in an email address line that can be filled with the vendors email. By specifying the ZPDF1 output device, the report is generated as a PDF attachment and sent along to the vendor via email.
The two questions I have are:
1. Is there any way to bring over the print parameters needed for the popup screen and eliminate this screen from appearing?
The subject line on the email is populated with the system and spool number even if the title line is filled in on the print popup. Also, the email body has is created with generic text.
2. How can the email subject and body information be changed?
Sorry for the lengthy post but I am not very technical and I wanted to describe the issues as best as possible.
thanks

Hi,
This is possible please configure the Message determination the Output should poin to Outlook
Please take the help of BASIS people to configure this
G.Ganesh Kumar

NO OUTPUT DEVICE ERROR

Hi Guys Yesterday i reinstalled os x and my audio was working properly.....
But from today morning i got no output device error.....it also doesnot work in headphones.... someone do help...thank u....

There are many possible causes for this issue. Take each of the following steps that you haven't already tried. Back up all data before making any changes.
1. Start with the steps recommended in this support article. Don't skip any of the steps. It's the starting point for further efforts to solve the problem.
2. Run Software Update and make sure you have a fully up-to-date installation of OS X.
3. If you've installed an application called "Memory Clean" or any other third-party software that is supposed to "clean" or "purge" memory automatically, remove it according to the developer's instructions and restart. You should do that even if the software is not causing the problem, because it's useless.
4. Other third-party software that has been reported to interfere with sound output includes "Boom" and "Samsung Kies." If applicable, uninstall according to the developer's instructions (not by dragging something to the Trash.)
5. If an AirPlay device is selected for sound output from iTunes (or from other applications via third-party software such as "Airfoil"), deselect it.
6. Launch the application "Audio MIDI Setup" by entering the first few letters of its name in a Spotlight search and selecting it in the results (it should be at the top.) Select Built-in Output from the list on the left. If the Mute boxes are checked, uncheck them.
7. If a red light is coming from the audio-out port, the internal switch is stuck in the position for digital output. You may be able to free it by inserting and removing a mini-stereo jack of the proper size. Inserting any kind of tool in the port may cause damage that won't be covered by your warranty.
If there's no red light, the switch may still be stuck in the headphone position. Try to free it the same way.
8. Disconnect all wired peripherals except keyboard and mouse, if applicable. If more than one display is connected, disconnect all extra ones. Restart and test.
9. If you have a MacBook Air, turn off Bluetooth and restart.
10. Start up in safe mode. Don't log in; just restart as usual when the login screen appears. When you do, make sure the words "Safe Boot" do not appear in the login screen. If they do, the system is still in safe mode and sound won't work.
11. Reset the NVRAM.
12. Reset the SMC.
13. Triple-click anywhere in the line below on this page to select it:
/Library/Preferences/Audio
Right-click or control-click the highlighted line and select
Services ▹ Reveal in Finder (or just Reveal)
from the contextual menu.* A folder should open with an item selected. Move the selected item to the Trash. You may be prompted for your administrator login password. Restart the computer and empty the Trash. Recreate your settings in the Sound preference pane.
*If you don't see the contextual menu item, copy the selected text to the Clipboard by pressing the key combination command-C. In the Finder, select
Go ▹ Go to Folder...
from the menu bar and paste into the box that opens by pressing command-V. You won't see what you pasted because a line break is included. Press return.
14. Reinstall OS X after backing up all data.
15. Make a "Genius" appointment at an Apple Store.

HELP ASAP! no audio output device installed with hp pavilion dv2500

product name: hp pavilion dv2000
model number: dv2710us
product number:2CE75228LJ
windows vista home premium 32bit
my hp keeps telling that have no audio output device installed and theres the the image for volume with a large red circle with a white x in it.
this is not true because i have contexant (i think that's what it is called) speakers installed.
Lately when i would restart my computer the sound would work intermittently but for the past two days whether i restart my computer or not the image for volume with a large red circle with a white x in it is still there and says no audio output device installed. PLEASE HELP!
This question was solved.
View Solution.

Hi, you can try the below steps to resolve the issue :
Step 1 : Re-install audio drivers from HP Recovery Manager.
1. Click Start, in the Start search box, type recovery . Then click Recovery Manager .
2. In the Recovery Manager window that displays, click Next. On the Reinstall software programs that came with your computer screen, click No, I would like to see other options . Then click Next .
3. In the Reinstall hardware drivers screen, click Yes . Then click Next. On the Welcome to Hardware Driver Reinstaller screen, click Next .
4. In the driver list, select the name of the sound adapter installed on the system. Then click Next. When complete, the Reinstallation is complete screen displays. Click Finish to restart the computer. After the computer starts, test for sound. If the issue persists perform step 2.
Step 2 : Re-install audio drivers manually
If there is no sound and the error still displays, update the audio driver from the weblink below :
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-63129-1&cc=us&dlc=en&lc=en&...
Step 3 : Restart the Windows Audio Service.
1. Click Start , type services.msc into the search field, and then select services.msc from the list when it becomes available to open the Programs window.
2. Scroll down to and select Windows Audio , right-click to open the drop-down menu, and then click Start .
3. Right-click Windows Audio , click Properties , and then verify that Startup Type is set to Automatic .
Restart the Notebook and check for the issue.
****Click the White Kudos star to say thanks****
****Please mark Accept As Solution if it solves your problem****

How can I get my audio input and output devices back? I have no sound and cannot see any of the devices in Audio MIDI Setup..??

Hi, I tried to set up a new output audio device on my mac that would have multiple outputs (iBox Twist speaker and my internal speaker) but when I went to click onto one of the iBox Twist (there were 2 options available: iBox Twist and iBox Twist Stereo), Audio MIDI Setup crashed and when I finally got that back open, I found that there were no audio input or output devices to be found. My sound is working, as when I turn on my iMac, the starting sound still plays, however the volume control in the menu bar is no longer a black colour, but grey and when I try to change the sound on my keyboard it does not change. This already happened to me once, and after 3 hours I managed to fix it very simply (switching off Mac, unplugging power cord, leaving for 15 seconds, plug power cord back in and switch Mac back on, holding Alt, Cmd, P and R keys until you hear the Starting Up sound twice) however this same technique that fixed it once before is not working this time and I am still stuck without sound. I have tried Repair Permissions, rebooting in Safe Mode, Hardware Test and checking for Software Updates. Has anyone else had this problem and managed to fix it?
Thanks in advance for any help anyone can give me!

In case anyone has had the same problem as me, I have just managed to fix this by doing the following:
Switch off Mac
Switch back on in Safe Mode (Hit power button, then hold Shift key until a loading bar appears at the bottom of the screen).
Switch off Mac again
Remove power cord and wait 15 seconds
Plug power cord back in and hold down the keys alt, cmd, p, r all at the same time until you hear Starting chime for a second time and hopefully your audio will back.

'$' in output device

Hi!
What does in mean when the output device starts with '$'?
Thanks!

Hi SS,
Here is a screenshot from an output condition record.
When I checked in table TSP03, the output device is not there. I also tried testing the output device using SO10 but it says output device is not defined.
BR
Cholen

Output Device problem ,Printer problem

Dear Friends,
I have problem with the printer,
We have given Output device( Printer ) in User profile i.e su01, while executing the transaction ideally system should pick this printer if the same user is giving the print, But in our case user trying to give KSB1 report line items, in this transction system is picking up different printer.
Let me know in this regard
Thanks in Advnce,
Anand Y

Hi Anand,
Try to maintain the printer in SU3 tcode. It will come same printer while taking he KSB1 printout also just now i tested it is coming properly.

Cannot find PDL type for output device LOCL in J1INCRT

Dear all
I am getting error in PRD system. When I am running J1INCRT (Customizing for Certificate Printing) the error
cannot find PDL type for output device LOCL
we are using ECC6 ,oracle 10g and windows 2003
Kernel release    701
Please suggest how to solve
Regards,
Kumar

Hello
It looks like that you had not installed the ADS(Adobe Document server) for the PDF type reports. Please check with your basis team if you want to configure ADS.
If you need the output as a sapscript then please do the sollowing steps:
(1) Execute transaction SM30
(2) Enter 'Table/View' as V_T5F99OCFT
(3) Select 'Maintain' option.
(4) Select 'New Entries' option from the Application Too
(5) Enter following entries:
     Logical Form Name    = HR_IN_EPF12A_99M
     Form Variant         = (Leave this field blank)
     End Date             = 31.12.9999
     Start Date           = 01.01.1990
     Form Type            = SAP Script (SSC)
     Def. Type            = (This field should be checke
     PDF Form Name        = HR_IN_EPF12A_99M
     SAP Script Form Name = HR_IN_EPF12A_99M
     Smart Form Name      = (Leave this field blank)
(6) Save the entries
The above example I have given you is only for the form 12A.
You have to make entries for all the reports sapscript in this table.
Please goto SE71 -> F4 -> Payroll -> Payroll India here you will find
all the sapscripts you require.
Regards
Ramana

Email Address not visible for output device MAIL in created batch job

Issue in ECC6.0: Email Address not visible to display/change for output device MAIL in print parameter of each step in the created batch job.
User wants to periodically receive report file via send to his email, so I create the batch job running report and send the report in pdf file to his email.
Detail in the batch job
1) In print parameter screen of the step in the batch job
-Using output device MAIL (output type ZPDF1)
-inputting email address of receiver in the EMAIL ADDRESS field
2) After the batch job was saved, I tried to display/change the field EMAIL ADDRESS via Tx. SM37, but this field is invisible. The field can not be displayed or changed anymore. I also tried in SM36, but it is for creating new batch job, not changing the existing batch job.
4) User receives email with pdf file from the batch job.
How to change/display the email address of the receiver in the created batch job?
Note that we just changed to use SAP ECC6 from SAP 4.6c. In SAP 4.6c, we can change/display the
Email Address Field via Tx. SM37.
Pls kindly suggest, thank you very much in advance.

Hi Srirompoti,
After saving the job if the job has not started then you can follow the below steps to change the Email address.
1. View the job from Txn SM37.
2. check the check box for your job that you want to change and goto menu path "Job->change
3. in the next screen goto "Edit->steps." or press "F6" key
4. place the coursor on the job and goto menu path "Step->change->print specifications.
5. here you can change the email address.
If you are not able change the data then you might not have authorization.

Test report to check output devices?

Similar Messages

Maybe you are looking for