Test system refreshed

Hello,
Our Test system is refreshed for some reasons. I'm not aware to which date is that refreshed.
Now, there are about 30-40 objects(programs, function modules and tables as well) which
don't have the latest developments.
is there any faster way to find the version mis match between the Test system and Development system?
Thankful for any kind of help.
Lucky.

Hi Lucky,
If No back up is taken,
Only thing you can do here is just go to the development system for a particular object and go to utilities --> version management and check which version is active..
you need to release that active version to testing system...
Probably let the missing terms get recognised in testing system , then you will get list of objects which needs to to transported from development to testing system.
Regards
Satish Boguda

Similar Messages

Table structure changed in testing system after system refresh.

Hi Team,
Recently we underwent a system refresh in Testing System where the Testing data is filled with Production data. But now we find that in one table some fields which we had deleted they are again found there. The version history of table is also gone. The table object was under testing in testing system and after which it was supposed to be transported to production. I believe System refresh only means refresh of data and it has nothing to do with table structure. Please correct me if I am wrong. Please also let me know what could be the reason of those changes in table if it is not System Refresh.
Regards,
Amit

I believe System refresh only means refresh of data and it has nothing to do with table structure.
Alas, you were wrong, after all table definition are data too, as program sources...
You have to re-import every transport request which was not yet transported to production in your test system.
Regards,
Raymond

For one Urgent Change during performing the Approval(chnging the status to 'To be Tested') system does not recognize any changes using the CTS WBS BOM in the development system. The transaction is therefore incorrect or the status was reset by the system.

For one Urgent Change while performing the one of the Approval before changing the status to 'To Be Tested'
We are getting below error.
The system does not recognize any changes using the CTS WBS BOM in the development system. The transaction is therefore incorrect or the status was reset by the system.
COuld anyone please help us to know, How it can be resolved?
We also have this below error.
System Response
If the PPF action is a condition check, the condition is initially considered as not met, and leads to another warning, an error message, or status reset, depending on the configuration.
If the PPF action is the execution of a task in the task list, and the exception is critical, there is another error message in the document.
Procedure
The condition cannot be met until the cause is removed. Analyze all messages in the transaction application log.
Procedure for System Administration
Analyze any other messages in the task list application log, and the entries for the object /TMWFLOW/CMSCV
Additional Information:
System cancel RFC destination SM_UK4CLNT005_TRUSTED, Call TR_READ_COMM:
No authorization to log on as a trusted system (Tr usted RC=0).
/TMWFLOW/TU_GET_REQUEST_REMOTE:E:/TMWFLOW/TRACK_N:107
For above error Table /TMWFLOW/REP_DATA_FLOWwas refreshed as well but still the same error.

If you are in Test System, you can use function module AA_AFABER_DELETE to totally delete the depreciation area (tcode SE37, specify chart of depreciation and depreciation area), After that recreate your depreciation area and run AFBN. But before you do that, have you created a retirement transaction type that limits the posting on your new depreciation area? If not create one.
Hope this helps.
Thanks!
Jhero

Strange problem in report Execution in test system

Hi,
As something strange going on my program in test system.
1) Executing the program in Development system using SE38->program name->F8. the program executes and display selection screen fraction of seconds.
issue:
When i am doing same process in TEST System(using SE38->program name->F8) the execution process is min 1 or 2 min , then i am gettign the Selection screen.
I have checked other programs in TEST System but it doesnu2019t happen to any other programs on TEST system.
Program functionality--
i am using 2 table and MARA and Z table, Using Selection screen i am extracting the data into output screen and excel download
Dispaly
1)if user select the Radio button output to screen in selection screen
Display data into screen using some color formatted
2)if user select the Radio button output to file in selection screen
I am using OLE Automation Controller to get the Output excel download some color formatted data
please let me know how to rsolve this type of isssue in Test system...
plz respond when you find the time.
Regards,
AS
Moderator Message: Urgency downgraded.
Edited by: kishan P on Apr 13, 2011 11:59 AM

Yes ..
INITIALIZATION. Event i have written code like free the objects ans clear Work Area and Refresh the Internal tables
And
*-to highlight the comments on selection-screen
LOOP AT SCREEN.
    IF SCREEN-GROUP1 = 'RM1'.
      SCREEN-INTENSIFIED = '1'.
      MODIFY SCREEN.
    ENDIF.
ENDLOOP.
Add entries to get the search help values
PERFORM SEARCHELP_REGION.
PERFORM SEARCHELP_COUNTRY.
At selection screen event i am getting the search help for the region and country
AT SELECTION-SCREEN ON VALUE-REQUEST FOR S_REGN-LOW.
*Search help for Region
PERFORM SEARCHHELP_REGN_F4.
AT SELECTION-SCREEN ON VALUE-REQUEST FOR S_CTRY-LOW.
*Search help for Country
   PERFORM SEARCHHELP_CTRY_F4.
using FM :*FM for F4 help for returning the value to be displayed
CALL FUNCTION 'F4IF_INT_TABLE_VALUE_REQUEST'
Please let me know is it couse problem in TEST System....
so how to resolve the issue...
Regards,
SR

System Refresh problem - request/task does not exist

I have a problem after system refresh, and when I am trying to import users and roles, I get the message - request/task XXXXXXX does not exist.
Data/cofile are present.
Can someone help me please ?
Thanks in advance,
Jordan

I got it ... in SCC4, the client role must have been set to TEST instead of PRODUCTION, since the refresh is on Quality.

System Refresh On Windows Server 2003 ( Oracle )

Hello Gurus,
We are having ecc5.0 production server on windows 2003 server ( oracle as an database ).
We want to perform system copy.
can somebody guide me the procedure on windows server.
Server Information
ECC - 5.0
Window Server - 2003
Oracle ( 9.2.0.8.0)
I have one doubt should we use SAPinst for export/import procedure or backup restore from our production server to dev server
regards
Shishir

Hi Shishir,
I have one doubt should we use SAPinst for export/import procedure or backup restore from our production server to dev server
DEV System is your original System never refresh DEV System with Production. It is recommended to do System refresh on QA system or any other stand alone system (Test System).
Also see the below points.
1. If you have large database then use the backup restore process. this will help you to reduce your downtime.
2. You can go for the export/import process i.e R3load using SAPinst.
For more information see the system copy guide as suggested earlier.
Thanks,
Shambo

Data protection in test system.

Hi,
A question that I suppose that most of you have seen before...
We've external developers and consultants that access our SAP development and test systems everyday. Normally they are not allowed to work in our production system due security constraints. The problem is that our test system is an homogeneous copy of our production, so access to the test system is also a security threat.
Is there any way to add enough noise to the test system to not show real data and still be functional ? Of course it must be a repeatable process because we refresh the test database every month.
Is there any solution/software about this ??
Regards,
Joan B. Altadill
CELSA SAP Admin

Hallo Joan
You may want to consider the excellent product DSM/ERP from EPI-USE Systems <i>: Data Sync Manager/ERP is a modular product that enables the transfer and integration of Human Resources, Accounting and Logistics data between R/3 systems within a SAP system landscape</i> : <a href="http://www.epiuse.co.uk/products/datasyncmanagererp">www.epiuse.co.uk/products/datasyncmanagererp</a>
Regards
Jan

CHARM managed system refresh

We have implement CHARM on our ECC landscape. And now the test system is going to be refreshed from production 1 month older.
From CHARM perspective - how do we accomplish this task ?
What the list of things that we need to do before and after refresh ?
Also, how will the transports be synced up?
What are the implication of a refresh or restore activity on CHARM ?

Hi,
I will do what was instructed by you.After doing so, what are the steps to check whether all the 3 system(dev,qty,prod) are having build with same objects.
Thanks,
Suresh.

System Refresh Precautions?

Hi,
During system refresh, are all types of data - master data, transaction data as well as <b>customising data</b> get refreshed from prouduction environment?
Could you please suggest what is best way to get back project specific new customising data on a refreshed environment? Is there some sap recommended best practice on this.
regards,
Karthik

Hi Please go through. This will give you exhaustive information. After refresh we used this to get back the required system specific customizations.
     Refresh from PR1 to QA1
1.     Before the copy
     Note down customer key, Installation number and license key - Done
     LICENSE system: QA1
     Customer key: L1985917776
     Expiration_date: 99991231
     Installation no: 0020065063
     Key: GKRZ25H353129JYX8HCJRS13
     Productid: R3_ORA
license useable ***
(directory: \usr\sap\QA1\SYS\exe\run)
(run command: saplicense show)
Team Involved: SAPDBA
     Download RFC tables - To be done
Tables rfcattrib, rfcdes and rfcdoc have been exported using sapdba on QA1 and the corresponding files are kept in a new temporary directory: /oracle/QA1/rfc_dest. After the system copy, these files have to be moved from /oracle/QA1/rfc_dest to /oracle/QA1/sapreorg and then the tables can be imported into QA1, to revert back to the RFC destination information as it is now.
Steps : 1)login with oraqa1
           2) type sapdba
           3) select e - Export/import
Perform this step two days before the scheduled refresh.
Team Involved: SAPDBA
     Backup user master records in QA1 - To be done
Procedure : login to QA1 400.
Execute Transaction code: SCC8 (CLIENT EXPORT)
Selected profile: SAP_USER
Target system: QA1/DV1(safety backup)
Perform this step two days before the scheduled refresh.
Team Involved: SAPDBA
     Compare filesystem spaces - Done
Team Involved: SAPDBA
     Compare transports To be done
Team Involved: SAPDBA
     OPERATION MODES(RZ04) Done
Existing QA1 operation modes.
Team Involved: SAPDBA
     Successful backup of PR1 To be done
A successful offline backup has been scheduled on *** and that backup will be restored on to QA1 by the Unix team.
Team Involved: USTO
     System messages/E-mails To be done
SM02- CREATE A TEST MESSAGE IN PR1
Two days before the scheduled refresh perform this step.
Team Involved: SAPDBA
     Delete the existing datafiles on QA1 To be done
Login as qa1adm and execute stopsap
Login as oraqa1 and execute:
lsnrctl stop
rm rf sapdata?/*
Team Involved: SAPDBA
2.     The copy To be done
Copy all the datafiles from /oracle/PR1/sapdata? To /oracle/QA1/sapdata?
Owner, group and permissions of the new files/directories to be maintained as before
Copy Command: rcp p /oracle/PR1/sapdata*   Sierra: /oracle/QA1/sapdata*
(NOTE: If errors occur when restoring/copying the sapdata on the target system, the complete restore/copying has to be repeated.)
Team Involved: UNIX FOF/USTO
3.     After the copy To be done
     Creating the control file on PR1 To be Done
Login as pr1adm and execute the following in svrmgrl
connect internal
alter database backup controlfile to trace;
exit
FILE created under the following Location: \ORACLE\PR1\saptrace\usertrace\ <pr1_ora_xxxx>.trc chose the latest run
ftp the file onto desktop
Team Involved: SAPDBA
     Edit the control file To be done
Here is the edited control file:
Team Involved: SAPDBA
     Creating the control file on QA1 - To be done
Login as oraqa1 ftp the file to /oracle/QA1 and execute the following in svrmgrl
connect internal
@control.sql
alter database open resetlogs;
lsnrctl start
exit
Login as qa1adm and execute startsap
Team Involved: SAPDBA
     Post system copy activities
     License installation - to be done
Login with user qa1adm
Goto /usr/sap/QA1/SYS/exe/run
command: saplicense install
     Installation check (Transaction SICK)
     SE06 > Database Copy or Migration > Post Installation Processing
     Delete entries from tables: DBSTATHORA, DBSTAIHORA, DBSTATIORA, DBSTATTORA, MONI, PAHI, OSMON, DBSNP, SDBAH, SDBAD, SDBAP, SDBAR, DDLOG, TPFET, TLOCK and TPFHT
     Initial SAP consistency check (Transaction SM28)
     Database consistency check (Transaction DB02)
     Server check (Transaction SM51)
     TMS configuration
      Logon to the SAP R/3 System and goto TCODE SE06. Select "Database Copy or Migration" and execute "Post Installation Processing".
      Delete old TMS configuration and make new configuration for TMS via STMS TCODE.
     Logical system set-up and BDLS
Delete logical system for client 400 after system refresh and create new logicalsystem and assigned to client 400.
After refresh: LOGSYS400(logical system for client 400)
Delete this logical system and create new logical system
New logical system: QA1CLNT400 (logical system same before refresh in QA1)
     ITS and Bugseye settings
     RFC destinations as per Appendix (import the exported tables and then delete the temporary directory /oracle/QA1/rfc_dest)
     Logon load balancing(Transaction SMLG)
     Instance profiles
Import profiles from active servers using RZ10
Save and Activate instance profile. And restart the sap services.
     CCMS configuration
     Housekeeping jobs
     Background jobs(daily jobs)
     Application jobs
     Printer/spool/TemSe set-up
     User administration
    The transports are imported implicitly in post processing with transaction
SCC7.
     Transport sequence number set-up
     Mass transport and Support package/patch application.
Re-import transports to QA1 from DV1 which are not available in PR1.
     Manual configuration
     Create the rest of the clients:
o     400     UAT/OAT Live Copy
New client 340 to be created with the following settings.
Source client: 400
Target client :340
Profile: SAP_UCSV
COPY MODE: local copy
Team Involved: SAPDBA

System refresh of Prod onto DEV in ECC5.0

Hi,
Can i have steps to perform a system refresh in ECC5.0. on AIX5.0 and Oracle 9i. Kindly send me the details steps of Pre and Post Installs that need to be done.
With Regards
Naresh

SAP Client Copy / System Refresh
Before doing a client copy, you need to prepare the following :-
1. Find the source client space with the client size custom program which can be implemented using the rel. note:
    Find the space of the client - '0118823'. This will give you the size of the source client.
2. If your are on Unix OS, adjust all the file systems according to PRD file system to fit the PRD client in DEV
    client based on space requirements also.
3. You can do the client copy by remote or export/import client.
    Remote method is not preferred if you are doing a large client copy.
    Do a client export/import.
4. To speed up the export/import, use R3trans export/import for the clustered tables.
    Please find the rel. notes related to performance improvements for cluster tables in OSS.
5. Do import and post processing.
    Note: Export may take 10 to 20 hr. for 50gb of data
    import may take 4 days and post import will take 8 to 15 hr. for 50gb of data. And it all depends on
    your system performance.
Please refer OSS rel. notes for the few RZ10 parameters which needs to be set for cluster tables to speed up the process.
Note :-
If it is a fresh installation, do this --
1. SCC4 --> Create client no. and fill other details.
2. Logon to the newly created client with SAP* and PASS as password.
3. SCCL --> choose any profile (preferably SAP_ALL), source client 000 and target client <as created just now>.
4. Preferably do a test run initially to check if it can go well.
5. As a care check space in databases.
if helpful reward points are appreciated

System refresh in HANA (Side-car)

Hi Experts,
I have some queries around system refresh in HANA.
I have a side-car implementation of HANA. Data is replicated by SLT from ECC to HANA.
Question is - Can we directly perform a system refresh from prod HANA to Quality HANA box?
or we can only have below option:
Refresh prod ECC to Quality ECC & reload all the tables again from quality ECC to quality HANA?
I am particularly interested to have answers/thoughts on -- "Can we directly perform a system refresh from prod HANA to Quality HANA box?"
I have not heard of this approach so far.
I know the other option - "Refresh prod ECC to Quality ECC & reload all the tables again from quality ECC to quality HANA?" is feasible.
quick response is much appreciated.
Best Regards
Sachin Bhatt

Sorry I thought it was clear, let me explain.
HANA with SLT, is a replica copy of ECC tables. If you copy HANA Prod back to QA then SLT will no longer be operational.
You could re-enable SLT but you would have to re-initiate replication which would wipe out all the HANA tables, thereby making your system copy worthless.
If you don't re-enable SLT then you won't be able to do any testing or any table changes into QA.
So really there is no choice, you need to copy ERP Prod and HANA Prod, or just copy ERP Prod and re-initiate replication.

No Idocs were getting generated after the system Refresh

Hello Experts,
Recently my Sand box system has been refreshed with the Development system. (Its a system refresh and hence all the objects were also copied like Development).
After the refresh, we have performed the below activities --
BDLS to change the logical system
Maintained the LS in WE20
Partner Profiles from WE21 with proper settings with respect to the new logical system name. (Sand box).
RFC to myself source system and to the Flat File.
While executing a test load from Flat File the system is not able to generate any IDOCS in the system and failing with
"No Idocs generated; file system
Diagnosis
No IDocs have been created. With file systems as source systems, the IDocs are created in BI. As this did not happen, it is probable that there was a short dump in BI.
I dont see any short dumps in ST22 for this load and also any logs in SM21.
Any idea why the system is not able to generate IDOCS in the system?
We are planning to connect R/3 sandbox to BI sandbox once the Flat file load is running fine.
Thanks for your answers.
Raman

Hi ,
Hi
BD87 Update Idocs manually.
1. When you look in the Monitor screen for the first time on a day you mostly will see some Loads that have yellow traffic lights. When you click on the lowest line of the Load (with the time of Load start) you will get the next popup screen:
2. Here you can click on the "Yes" button. The Load specification window (right side of the screen) will now be filled with data.
3. You can now start the manual processing of the IDocs. You go to the "Details" tabpage of the right window. You right click on the line with the red traffic light stating "Request IDoc : IDoc ready to be transferred to application" on the "Details" tab page of the Load. In the option menu that appears choose the option "Update manually in OLTP" (click it).
4. You will get to the next screen (which is in fact a transaction in the source system (SAP R/3) where you can update the IDoc that is send by the source system)
5. Now click the "Excecute" button on the left of the screen (or press the F8 button on your keyboard). You will get to the next screen:
6. This states that the IDoc has been passed through to BW. You return to BW by clicking the "Back" button (or pressing the F3 button on your keyboard) twice. After the first time you will see the previous screen and after that the Monitor screen again.
7. You will now see that the Status of the Load has turned to yellow or green. When it is yellow you will have to wait a little time (the execution of the Load in BW is still running) and by clicking "Refresh Details" button on the left upper side of the screen (or pressing the F8 button on your keyboard) you will see the Load turn green.
Regards,
Rahul.

Archivelink u2013 System refresh

We are planning to refresh our SAP R/3 QA system with a copy of our PRD. For both systems we have a content server installed which are used for HR pictures etc but the links a created as archivelinks in R/3.
Do we need to do some kind of post activity for restoring the archive links after QA have refreshed with a copy forum PRD?

Hi.
Normally you will have no chance to load the pictures on newly copied QA-System from the "old" Content Management System.
Why?
The QAS documents are stored on the test content management system. Thats ok. They are linked to the sap items with entries in tables toa01, toa02, toa03 or toahr (in the testsystem). If you do the system copy you will loose these links...
So you have garbage in your link tables...
A clean way is to delete the files on the test content management system and the entries in the toa-tables (SAP). Or you can delete the R/3-Entries only. Or you can "copy" the data from the productive cms to the test system (but i've never heard about that).
You can try to delete the documents in sap via transaction oaad but i think you will be faster if you do it with a simple delete-statement.
regards,
martin

Source System Problem after system refresh in RSA1 trx

Hi,
We have R/3 4.7 Test source system created in our SCM 2007 Test System. The source system check was OK.
The R3 Test system was refreshed with Production data few days back and now my source system is not working. When i perform Source System check it says:
BI unknown in source system
BI IDoc type ZSSB006 is not the same as source system IDoc type
I performed following steps in R3 Test system after its system refresh:
1. Created logcal system and created RFC.
2. Created port in trx we21.
3. Created partner profile in trx we20.
4. For the outbound parameter RSSEND, I had to create idoc type that should be same as in my SCM system i.e. ZSSB006.
5. Created idoc type using trx we30 as a copy of RSSEND and added entry in table EDIMSG. Now, i could also create outbound parameter RSSEND with idoc type ZSSB006.
After performing the above steps i also replicated the datasources for the R3 Test source system, but its still showing above error.
I also checked the RSBASIDOC table in SCM test system. It has correct entry for my source system. But there is no such entry in RSBASIDOC table in the R3 test system.
Someone pls help me.
Regards,
Chintan

Hi
Need to restore the All Dalaload connection settings after refresh the system which either R/3 or SCM.
RSA1 -> select the Source system -> Right click -> Restore , It'll ask the connecon paramters like RFC , method of activations. Then check the connection test of the Source system .
Check the the note for further info...
Note 886102 - System Landscape Copy for SAP BW and NW BI
Hope halp you...
Regards,
Sureshram

Source System Problem after System Refresh

Hi,
We have R/3 4.7 Test source system created in our SCM 2007 Test System. The source system check was OK.
The R3 Test system was refreshed with Production data few days back and now my source system is not working. When i perform Source System check it says:
BI unknown in source system
BI IDoc type ZSSB006 is not the same as source system IDoc type
I performed following steps in R3 Test system after its system refresh:
1. Created logcal system and created RFC.
2. Created port in trx we21.
3. Created partner profile in trx we20.
4. For the outbound parameter RSSEND, I had to create idoc type that should be same as in my SCM system i.e. ZSSB006.
5. Created idoc type using trx we30 as a copy of RSSEND and added entry in table EDIMSG. Now, i could also create outbound parameter RSSEND with idoc type ZSSB006.
After performing the above steps i also replicated the datasources for the R3 Test source system, but its still showing above error.
I also checked the RSBASIDOC table in SCM test system. It has correct entry for my source system. But there is no such entry in RSBASIDOC table in the R3 test system.
Someone pls help me.
Regards,
Chintan

Hi Chintan,
Can you please check IDOC in your Target system. It should be the same type. Better you do the Partner profile steps.
Also please check have correctly created the idoc in Inbound or Outbound.
Consider the case like if its exist in BW as Out bound then its connected to Inbound IDOC of R/3 and vice a versa.
Please elaborate your refresh activites. Normally IDOC setting never get changed in you refresh activites.
Just check your BW system patch level and search for Notes.
Regards,
Mahesh

Test system refreshed

Similar Messages

Maybe you are looking for