Testing EDI with QTP

Hi,
Could anyone please let me know how are EDI documents tested using QTP ( please explain with an example ) .
Many Thanks, Shilpa R.

Solved

Similar Messages

Flash 8 with QTP 9.2

I am very new to Flash 8. Can anybody help me in writing classes
for Flash movies so that I can test them with QTP 9.2...Please
Thanks in anticipation

Thanks.
Actually I tried with Flex store sample application. (http://examples.adobe.com/flex2/inproduct/lcds/flexstore/flexstore.html)
The objects were identified when I've done the recording only first time. But once I closed and re-launched the QTP I coudn't see any scripts in Expert view.
Please rename the steps.jpg as steps.doc and see the steps I've tried. (I coudn't found a way to attached word doucment to here)
Thanks,
Lakmal

Automation with QTP using swfobject as the wrapper

I can get my project to run correctly when I use the out of the box flex wrapper but not with swfobject.Has anyone had experience using swfobject with QTP for automation testing?
http://code.google.com/p/swfobject/

Ok, apparently you didn't "sort and compress IDs" like I said (out of curiosity: why not?). DO THAT. The MAX ID should be 90, MAX ID IN USE should then be 85 (with Rubiter Ate). Now, still in properties, go to the IDS pull down menu again, this time selecting "Instrument Up". This usually is for multiple instruments in one ensemble to up a certain instrument in the automation hierarchy. It seems at the time the ensemble was created, there have been more instruments (like some FX) present that got deleted later on, leaving the base ID of the remaining instrument somewhere in the 300 range (or so). However, after you did the "Instrument Up" thing, the Base ID should now be 0, which is what it should be. Put the Instrument Channel in Logic into Latch mode, start the sequencer and move the knobs. Logic should record all automation just fine (checked it here).
G5 dual 2GHz Mac OS X (10.4.8) Logic Pro 7.1.1 semi acoustic fuel cell
G5 dual 2GHz Mac OS X (10.4.8) Logic Pro 7.1.1 semi acoustic fuel cell

I "upgraded" to FF4, now it doesnt work properly, wont open pages, will open blank tabs when i click on a link, tried to go back to the older one but that doesnt work now either, have tested it with Safari and it opens everything fine. Any ideas?

After upgrading to firefox 4 im now having a lot of problems using the browser.
if i try an open a link in a new tab it will just open up a blank tab, if i click on links or even type in the google search bar at the top it doesnt do anything, it just says "done" and the circle thing stops as if im on the page already, have tested it with Safari doing the same things and Safari works fine. I'd swap but all my bookmarks and passwords are in Firefox so id rather stay with that.
I tried going back to the older version of firefox (3.5 or something) but seems the bugs are here to stay now.......so.......any ideas? because its really annoying, shouldn't have "upgraded".
Is there a new patch coming out anytime soon or should i start getting used to Safari?
Thanks for your help.
Mark Lavery (Melbourne)

I would copy over the entire thing if you have room. With iTunes 10.4 though, you can download any previous iTunes purchases you have made in the past with your current iTunes account. While in iTunes, look at the left hand side of your screen and select "Purchases" and look at the bottom right corner of the screen and select "Download Previous Purchases". If you have an iPhone, iPod and/or iPad...you can do the same thing from each device. Nice new feature...just remember that those ripped CDs need a back-up!!! Enjoy...

Error while Test Connection with Connector

hi all:
     there is an error while Test Connection with Connector , I also test it through sys administration->sys configuration->
suport -> sap transaction, I got all errors, I put these two errors as folows, could you please tell me how to sovle it
***************ERROR 1 while *error while Test Connection with Connector ******************************************************
Test Details:
The test consists of the following steps:
1. Retrieve the default alias of the system
2. Check the connection to the backend application using the connector defined in this
system object
Results
Retrieval of default alias successful
Connection failed. Make sure that Single Sign-On is configured correctly
************error sys administration->sys configuration-> suport -> sap transaction        ********************** 1.5 #0025B3E02892006100000A0800001798000487530FB0122E#1274690722265#com.sap.portal.prt.runtime#sap.com/irj#com.sap.portal.prt
.runtime#guodongdong#47472##n/a##690347f0670e11df98cc0025b3e02892#SAPEngine_Application_Thread[impl:3]
9##0#0#Error##Java###04:4524/05/10_0077_6087550
[EXCEPTION]
#1#com.sapportals.portal.prt.runtime.PortalRuntimeException: Exception in SAP Application Integrator occured: Application URL
&\#39;:///sap(ZT1KVXBWektldldTeV9QQXBXRjNaWTRBLS1OZmRvZzBRWWY2QmN0WThNUmgqdUlRLS0=)/bc/gui/sap/its/webgui&\#39; is not valid!
Please check the protocol and host entries for system &\#39;sapdev&\#39;.
     at com.sapportals.portal.appintegrator.AbstractIntegratorComponent.doContentPass
(AbstractIntegratorComponent.java:123)
     at com.sapportals.portal.appintegrator.AbstractIntegratorComponent.doContent(AbstractIntegratorComponent.java:98)
     at com.sapportals.portal.prt.component.AbstractPortalComponent.serviceDeprecated(AbstractPortalComponent.java:209)
     at com.sapportals.portal.prt.component.AbstractPortalComponent.service(AbstractPortalComponent.java:114)
     at com.sapportals.portal.prt.core.PortalRequestManager.callPortalComponent(PortalRequestManager.java:328)
     at com.sapportals.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java:136)
     at com.sapportals.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java:189)
     at com.sapportals.portal.prt.component.PortalComponentResponse.include(PortalComponentResponse.java:215)
     at com.sapportals.portal.prt.pom.PortalNode.service(PortalNode.java:645)
     at com.sapportals.portal.prt.core.PortalRequestManager.callPortalComponent(PortalRequestManager.java:328)
     at com.sapportals.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java:136)
     at com.sapportals.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java:189)
     at com.sapportals.portal.prt.core.PortalRequestManager.runRequestCycle(PortalRequestManager.java:753)
     at com.sapportals.portal.prt.connection.ServletConnection.handleRequest(ServletConnection.java:240)
     at com.sapportals.portal.prt.dispatcher.Dispatcher$doService.run(Dispatcher.java:523)
     at java.security.AccessController.doPrivileged(Native Method)
     at com.sapportals.portal.prt.dispatcher.Dispatcher.service(Dispatcher.java:412)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
     at com.sap.engine.services.servlets_jsp.server.servlet.InvokerServlet.service(InvokerServlet.java:156)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
     at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:401)
     at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:266)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:386)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:364)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:1039)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:265)
     at com.sap.engine.services.httpserver.server.Client.handle(Client.java:95)
     at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:175)
     at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process
(ApplicationSessionMessageListener.java:33)
     at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
     at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
     at java.security.AccessController.doPrivileged(Native Method)
     at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:104)
     at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:176)

Hi,
As per this part of the trace:
Exception in SAP Application Integrator occured: Application URL &\#39;:///sap(ZT1KVXBWektldldTeV9QQXBXRjNaWTRBLS1OZmRvZzBRWWY2QmN0WThNUmgqdUlRLS0=)/bc/gui/sap/its/webgui&\#39; is not valid! Please check the protocol and host entries for system &\#39;sapdev&\#39;. at ...
You can clearly see that the system object 'sapdev' is not configured correctly/at all - you are trying to launch transaction iView
(WEBGUI) and in order to do so you should configure the 'internet transaction server' category of the system object
with the hostname of the ITS server.
Generally the template is
<System.Access.ITS.protocol>://<System.Access.ITS.hostname>/sap<ESID>/bc/gui/sap/its/webgui?\....
So that's why you got
Please check the protocol and host entries for system ..

How to execute Script in Test Plan with two different System Data Container

Dear members,
I have a requirement.
I need to execute one Test Config in a Test Plan with one System Data Container and another Test Config in a Test plan with another SDC.
How to achieve this ?
Kind regards,
Pradeep
Edited by: Pradeep Singh Rawat on Mar 23, 2011 7:10 AM

>
Pradeep Singh Rawat wrote:
> I need to execute one Test Config in a Test Plan with one System Data Container and another Test Config in a Test plan with another SDC. How to achieve this ?
Currently it is not possible, to maintain more than one SDC on a test plan.
A workaround is, to maintain one SDC on a test plan and specify no target system direct in a test plan. If you maintain then your two systems in one SDC, you can specifiy each target system in the test configuration, where it is needed.
Here the example:
test plan:
systemdata container: SDC_ALL
target system: <empty>
test config 1:
systemdata container:
target system: CRM
test config 2:
systemdata container:
target system: ERP
systemdata container: SDC_ALL
target system: CRM -> rfc 1
target system: ERP -> rfc 2
Kind regards,
Christoph

Hello. My mac pro early 2008 restarts after sleep mode and it works slower. I tested it with apple hardwear test and it seems to be ok. Thank you.

Hello. My mac pro early 2008 restarts after sleep mode and it works slower. I tested it with apple hardwear test and it seems to be ok. Thank you.

Try this:
clone your system and repair it with Disk Warrior instead
Or try a clean test system install on another drive
A must: SmcFanControl 2.2 - a mere 400 rpm extra to keep air cooling up
Try to run w/o externals. MyBook included.
Is that a 7200.11 1TB? they had a lot of issues.
Run AHT off your OEM DVD.
2008 had to have EFI and SMC updates to deal with freezes on wake from sleep, and like all models, high inrush current. Hopefully you have a UPS and is 1500VA unit.
When you do hard restart from power button, you almost certainly add more directory errors and to files requiring immediate attention to repair and rebuild the directory; and to scan and repair and delete cache and temp files and folders. A must. Invest in bootable backups SuperDuper along with Disk Warrior (or TechTool Pro 6, maybe Drive Genius 3 but I'd rate that #3).
TimeMachine has its own bad habits, especially with Green drives and some externals.
Try to rule out everything and then add back one at a time.
And it may just be time to replace the 8800, very common, a couple threads this week, and it is 3 yrs old. Might want ATI 5870 or 5770.

Solution to install Windows 7 on Macbook Air MID-2013 after 3 weeks of test, make with ISO image a usb key 2.0, It works!

Solution to install Windows 7 on Macbook Air MID-2013 after 3 weeks of test, make with ISO image a usb key 2.0, It works!

1. Select Partition4: Bootcamp. You should see advanced Options.
2. Click Format and convert the partition to NTFS.
3. Click Next.
Reference - http://manuals.info.apple.com/MANUALS/1000/MA1636/en_US/boot_camp_install-setup_ 10.8.pdf
See Page 6.

Crane Aerospace and electronics is looking for Test Engineers with LabVIEW experience - please disregard previous post.

Here is the correct post:
Are you detail-oriented, creative, and technically skilled at Engineering design and development? Come to Crane Aerospace & Electronics and use your excellent Engineering skills to design, improve, and deliver the next generation of products in the aerospace and electronics Industry!
We have a unique and exciting career opportunity for Engineer II, Test.
You will be responsible for maximizing new product development and manufacturing performance through the creation and deployment of test strategies, tools, and plans. Design and implement high performance hardware and software for test equipment. Authoring test procedures and performing Qualification test activities. Ensure high product quality.
Responsibilities:
Collaborate with customers and multi-disciplined engineers to establish/clarify test, qualification, verification and validation requirements.
Write test plans, procedures, requirements and reports in a highly structured environment.
Analyze, develop and deploy complex and high performance test hardware and software solutions for automated test equipment.
Design, develop, debug, validate & verify the fabrication of manual and automated test equipment at the circuit board and system level, and specify and procure COTS test equipment.
Develop/maintain hardware documentation including block diagrams, schematics, BOMs, wiring diagrams and wiring lists, software documentation, and configuration control of initial release and updates.
Perform detailed calculations to establish test equipment specifications and design margins.
Maintain existing test systems through bug fixes, improvements and modifications.
Support the estimation of costs and schedules to develop or upgrade test platforms.
To perform a number of the above responsibilities with limited supervision.
Minimum Requirements:
Experience: 2-5 years. Previous work experience in aerospace, space or medical electronics industry preferred.
Knowledge: Microprocessor / Microcontroller hardware and firmware design; Analog Circuit and power supply design; Digital Circuit Design including high-speed serial communication design; Firmware programming in c; Schematic Capture, PADS Logic preferred; Circuit Simulation; Fundamentals of magnetic proximity, temperature, and pressure sensing electronics; ESD; Familiarity with testing standards (MIL-810, MIL-704, and DO-160 preferred). Basic laboratory test equipment; LabVIEW experience, certification preferred; Developing hardware per DO-254 and software per DO-178 preferred; Experience with Adobe FrameMaker, IBM Rational tools, TestStand, Microsoft Project preferred.
Skills: Good interpersonal and communication skills (verbal and written)- effectively lead and/or participate in multifunctional teams in a dynamic work environment. Ability to manage multiple tasks, flexibility to switch between tasks and prioritize tasks.
Education/Certification: Bachelors Degree in electrical engineering, computer science, physics or related technical discipline.
Eligibility Requirement: Must be a US Person (under ITAR rules) to be eligible.
Working Conditions:
Working conditions are normal for an office/manufacturing environment. Machinery operation requires the use of safety equipment to include but not limited to safety glasses, heel straps, and shop coats.
Requires lifting 25 lbs
Apply online today: http://ch.tbe.taleo.net/CH06/ats/careers/requisition.jsp?org=CRANEAE&cws=5&rid=3170
Crane Aerospace & Electronics offers competitive salaries and outstanding opportunities for career growth and development. Visit our website at CraneAE.com for more information on our company, benefits and great opportunities.
In our efforts to maintain a safe and drug-free workplace, Crane Aerospace & Electronics requires that candidates complete a satisfactory background check and pass a drug screen prior to employment. FAA sensitive positions require employees to participate in a random drug test pool.

How can you say you are hiring test engineers with LabVIEW, yet the job description doesn't even mention LabVIEW. All I see in there is CAD design.
There are only two ways to tell somebody thanks: Kudos and Marked Solutions
Unofficial Forum Rules and Guidelines

No Video with FCP HDV with QTP

I have a strange question....
I have an Intel G5 iMac (10.4.11) and I capture and edit with FCP 5.0.4 using a Sony Z1 using the HDV 1080i50 sequence (I live in Hong Kong) I edit the video and export Quicktime movie using my sequence preset HDV 1080i50.
I cannot play the exported video with QTP!!
I hear sound but there is no picture. I only have a white screen!!
I can open this video with FCP and it plays fine!!
I can then take this exported video and transfer it to my G5 dual core tower (10.4.11) and the video plays fine in QTP!
I would really like to be able to use QTP to play these videos! Both the iMac and G5 tower have the exact OSX and FCP. The only difference is one is Intel and the other is PPC! Has anyone had problems playing HDV videos on intel macs?
Any ideas or suggestion?

I've re-installed FCP Studio and the problem still persists....
any ideas?

How to associate a test message with a change document

I am using solution manager 7.01.
accessing my change documents through the workcenter I need to create a new test message - so I use the Create transaction button on the button bar, Service Process, Test Message
Then I am in the create test message screen. However from here I cannot see how to associate my test message with either the change document that I was processing or to the maintenance cycle.
Ideally I want to link the test message to the change document however at least to the maintenance cycle.
How do I do this?
Am I creating the test message in an incorrect way?
regards
Marina

Anyone? Does no one use Test Messages?

SQL Developer Unit Testing - Validation with PL/SQL

Hi,
I am trying to create Unit tests using SQL Developer UT framework.
But when i am creating validation using User PL/SQL code option.
Then how can i check value returned by l_count in code snippet below:
-- Please raise an exception if the validation fails.
-- For example:
DECLARE
l_count NUMBER;
wrong_count EXCEPTION;
BEGIN
SELECT count(*) into l_count
FROM test_recon
WHERE
match_num = 99836936
AND Stg_status_flag <> 'E';
IF l_count = 0
THEN
RAISE wrong_count;
END IF;
END;
Also, can someone please refer me to few more demo examples (apart from oracle docs) to implement good test cases with SQL developer.
I appreciate your help.
Regards
Dipali

Probably not the answer you're looking for, but back when I was playing around with the Unit Test stuff, I didn't have sys privs, and the DBAs were a little busy at the time to set a up a repository for me. Rather than wait, I installed Oracle XE on my machine and created a small dev schema and deployed unit test to that. It's so much easier to perform quick proof of concepts when you have full control.

How to create a test plan with specific transactions (or program)

Hello,
I'm a new user in Sol Man !
How to create a test plan with specific transactions (or program).
In my Business Blueprint (SOLAR01) I've created in 'transaction tab' the name of my specific transactions and linked it.
In my test plan (STWB_2) those specific doesn't appear to be selected !
Thanks in advance.
Georges HUYNEN

Hi
In solar01 you have defined but you have to assign the test case in solar02 for this test case in the test cases tab.
When you do so expand the business sceanario node in test plan generation of STWB_2 transaction and now that will appear.
Also visit my weblog
/people/community.user/blog/2006/12/07/organize-and-perform-testing-using-solution-manager
please reward points.

[svn] 1013: Bug: LCDS-180 - [WebLogic 10.1 on Suse9] MxUnit Dynamic destination "SecurityEmployeeUser" test fails with a NullPointerException

Revision: 1013
Author: [email protected]
Date: 2008-03-28 17:24:25 -0700 (Fri, 28 Mar 2008)
Log Message:
Bug: LCDS-180 - [WebLogic 10.1 on Suse9] MxUnit Dynamic destination "SecurityEmployeeUser" test fails with a NullPointerException
QA: Yes
Doc: No
Details:
This prevents the NPE but for non-servlet endpoints you need to be sure to define your users/roles in Weblogic's default security realm. The test was failing because login was failing, most likely because the regression server wasn't fully configured.
Ticket Links:
http://bugs.adobe.com/jira/browse/LCDS-180
Modified Paths:
blazeds/branches/3.0.x/modules/opt/src/weblogic/flex/messaging/security/WeblogicLoginComm and.java

How can I print the test page with the Arabic type from the command line

Hi,
I have been trying to make the tool for printing the test page from the command line on the Arabic OS. I used "rundll32 printui dll printuientry" with "/k /n" options. My tool is to print the test page in all OS when pushing the
button.
Normally, in the Arabic Windows, the test page is printed with RTL type when printing the test page in the "Devices and Printers". But in my tool, the test page is printed with LTR type. I'm confused because of this result.
Is it possilbe to print the test page with RTL type when using the "rundll32 printui dll printuientry"? If it is possible, could anyone give me the hint or information for resolving?
Please check for me.

Hello,
Thank you for your post.
Your issue is out of support range of Test Tools in Visual Studio 2010 and 2012 forum which discusses Visual Studio Test issues.
I am moving your question to the moderator forum ("Where is the forum for..?"). The owner of the forum will direct you to a right forum.
Best regards,
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Testing EDI with QTP

Similar Messages

Maybe you are looking for