Testing reports outside of Reports Builder using Oc4J

Hello
Has anone been able to sucessfully test a report ( 10g) with the OC4J that come with it ?Am looking for some high level steps .
Deepa

Hi Deepa
You can create report and place it in OH/reports/samples/demo folder.
Then go to OH/j2ee and start the bat file startINST.bat
this will start the j2ee Oc4j ,minimize it.
Then go to OH/j2ee/devsuite/config and open DEFAULT_WEB_SITE.xml and check the PORT number.
Now open a browser and try to run this url
1.http://<machinename>:<port>/j2ee -- this should show help page
2. http://<machinename>:<port>/reports/rwservlet -- This should show servlet help page.
3.http://<machinename>:<port>/reports/rwservlet?report=<yourreportname>&destype=cache&desformat=html&userid=<username>/<password>@<SID>
You need to chenge the entried shoen in <....> tags in url, rest use as it is.
enjoy running reports.
Thanks
Subodh

Similar Messages

Problem testing report builder report

When I test my report it while in report builder, it looks great on the screen. When I try to actually print a page so I can see how it looks on paper using the forms, all I get is the background/ CF Developer message. What am I missing here? I should be able to test print the report. I don't mind the background but I need to see the data.

RaiderDaveK wrote:
When I test my report it while in report builder, it looks great on the screen. When I try to actually print a page so I can see how it looks on paper using the forms, all I get is the background/ CF Developer message.
In what format is the report output being produced? (Flash/Pdf/etc.)

Teststand automatic test report printing using LabView workaround

I tried the LabView workaround for the automatic printing of test reports in TestStand (see email message below).
It will work if I set the URL to a specific HTML TempReport. However, TestStand is configured to generate a unique test report for each UUT. So, in the test report directory there are xml reports and the occasional HTML report, example TestReport_00104.html. Not sure then what to set the URL to?
Note: Your reference number is included in the Subject field of this message. It is very important that you do not remove or modify this reference number, or your message may be returned to you.
Hi Bill,
Thanks you for your reply.
Right ok. Well, if you are interested in the LabVIEW workaround, I can send this to place it in your modified sequential model.
The workaround works as desired. It does it all automatically. I have set it to not prompt the user for the print dialogue but this can be easily changed. Therefore, for any example program in Teststand, if it is based on the modified sequential model, an HTML style report will be printed on the default printer automatically.
It needs to be placed in the following location:
Within the Sequential Model, within 'Single Pass>>Print Report' do the following:
- Replace all the 'Main' steps (Navigate to HTML, Print HTML File & Close IE Browser) with the LabVIEW function call.
- This one function call will do all the steps above at once.
NOTE: In the LabVIEW VI, you will need to select the correct directory where the new html files are being created. Otherwise the print function will not work. This is called URL. Make you sure you have checked this.
For ease of understanding I have included these steps in a word document with screen shots.
As I do not know which version of LabVIEW you might have, I have attached three versions of the .vi file; 2012, 2011 and 2010.
In regards to the mention of Teststand not having built in functionality for automatic printing of reports, unfortunately this is the case.
I hope this will be a sufficient workaround for you.
If you problems implementing this solution, please ask me for further information. However, it should be fairly simple to do.
Just to inform you, I will be out of the office from 12.45pm today for the rest of the week on annual leave.
I will be back in the office on Monday 14th January 2013, should you have any further queries.
Kind Regards,
Dominic Clarke
National Instruments
Applications Engineering
www.ni.com/support
Attachments:
Print HTML file from LabVIEW.zip ‏39 KB

Hi Bill,
I managed to implement this.
In the sequential model I added a LabVIEW action after 'Add Root Tags To XML Report'
As URL I use a sequence local: Locals.ReportFilePath
I points to the ML report in my case and then the VI works fine.
However I'm looking for extra functionality and that is waiting untill printing is completed.
Can you help me on that ?

Report display is different in report builder, local oc4j and app server

Hi guys,
we upgrade reports from sql report writer into report 10g. In the report 10g builder,
the report format looks fine. but if i use the url as below
http://applicationserver/reports/rwservlet?report=test.rdf&userid=username/password@service&desformat=pdf&destype=cache
so the format will be mess up whatever i use this url in my local oc4j or i deployed it into 10g application server. and the format is different in oc4j and application server. Why this issue happend?
Thanks in advance,
Appcat

Hello,
They are a Fix Pack higher than you which may explain why it's broken on their server.
Download the Fix Pack for R2 and see if you can duplicate the issue.
Thank you
Don

Report Builder Using Cubes

I am trying to create query logic that reflects this:
If (Parameter = "Proportional" and Line Number = "310") Then True OR If Parameter # "Proportional" Then True Else False
My Data:
Parameter = "Proportional", "Premium", "Claims" etc.
Line number = 310,110, 140 etc.
My feeble attempt looks like this:
IF(AND(Statement Type = "Proportional",LineNumber = "310",IF(Statement Type # Proportional),True,False)

sounds like this to me
IIf ((Parameters!ParameterName.value = "Proportional"
And Fields!LineNumber.Value = "310") Or Parameters!ParameterName.value <> "Proportional",True,False)
Please Mark This As Answer if it helps to solve the issue Visakh ---------------------------- http://visakhm.blogspot.com/ https://www.facebook.com/VmBlogs

Exception while opening a JSP file created using oracle report builder

I have created a JSP page which contains embedded Oracle reports build using Oracle Report Builder.
I have deployed the JSP created above to the Oracle Application Server
but when i try to open the JSP file it gives the following error:
500 Internal Server Error
javax.servlet.jsp.JspException: rwlib-1: REP-1202: ORACLE logon not specified. at oracle.reports.jsp.ObjectsTag.doEndTag(ObjectsTag.java:206) at testing.test1._jspService(_test1.java:75) [SRC:/testing/test1.jsp:0] at com.orionserver[Oracle Application Server Containers for J2EE 10g (9.0.4.0.0)].http.OrionHttpJspPage.service(OrionHttpJspPage.java:56) at oracle.jsp.runtimev2.JspPageTable.compileAndServe(JspPageTable.java:567) at oracle.jsp.runtimev2.JspPageTable.service(JspPageTable.java:302) at oracle.jsp.runtimev2.JspServlet.internalService(JspServlet.java:509) at oracle.jsp.runtimev2.JspServlet.service(JspServlet.java:413) at javax.servlet.http.HttpServlet.service(HttpServlet.java:853) at com.evermind[Oracle Application Server Containers for J2EE 10g (9.0.4.0.0)].server.http.ResourceFilterChain.doFilter(ResourceFilterChain.java:65) at oracle.security.jazn.oc4j.JAZNFilter.doFilter(Unknown Source) at com.evermind[Oracle Application Server Containers for J2EE 10g (9.0.4.0.0)].server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:604) at com.evermind[Oracle Application Server Containers for J2EE 10g (9.0.4.0.0)].server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:317) at com.evermind[Oracle Application Server Containers for J2EE 10g (9.0.4.0.0)].server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java:790) at com.evermind[Oracle Application Server Containers for J2EE 10g (9.0.4.0.0)].server.http.AJPRequestHandler.run(AJPRequestHandler.java:208) at com.evermind[Oracle Application Server Containers for J2EE 10g (9.0.4.0.0)].server.http.AJPRequestHandler.run(AJPRequestHandler.java:125) at com.evermind[Oracle Application Server Containers for J2EE 10g (9.0.4.0.0)].util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor.java:192) at java.lang.Thread.run(Thread.java:534)
can anybody help regarding this
this is of high priority to me
thanks and regards
Subhajit

bump

How to use Report Builder with permission extension

Is there any method to let web site which use SSRS and Report Builder use different permission extension module?
In our web site project we use ReportingService2010 Methods to show and operate folder and report which stored in Report Service, in our project configuration file, we use windows authentication mode for Report Service.
In requirement 1.User can do any operation in folder “A” and folder “B” (we can create and delete report or folder) in web site. 2.User can’t use “Report Builder” to save reports which created by Report Builder to folder “B”, Reports which created by Report
Builder only can be saved in folder “A”. [User click “Report Builder” button in our web page to start Report Builder, use “Report Builder” to create report, if user want to save report, we need to hidden folder “B” in “Report Builder” or we need to remove
some operate right from folder “B”.]
We have two solution:
1. We want to write extension module to process this issue, we want to re-write CheckAccess method which will be called by web site backend and Report Builder, but how can we know who called CheckAccess method[Web site backend called CheckAccess method
or Report Builder?]
2. We want to let Web site back-end use permission extension module named WebSitePer.dll, and Report Builder use PBPer.dll, how to modify the configuration file?

Hi Fang,
As far as I know, SQL Server Reporting Services (SSRS), have no permission extension. In Reporting Services, it is use role-based security to grant user access to a report server. There are two types of roles: Item-level roles and System-level roles.
Based on my test, if we assign user with System User System-level role, the user will have permission to user Report Builder to create report. However, if we only assigned Browser or Report Builder Item-level role to the user, he/she will have no permission
to publish the report to the report server. In this situation, although user have permission user Report Builder to edit the report, it will have no effect of the report in report server. User who has assigned Browser or Report Builder Item-level role will
have no permission to delete report in the report server.
There is an article about Setting Permissions in Reporting Services, you can refer to it.
http://technet.microsoft.com/en-us/library/aa337491(v=sql.105).aspx
Hope this helps.
Regards,
Alisa Tang
Alisa Tang
TechNet Community Support

How to find the maximum of group sums within a specific column using report builder 3.0

Hi
For each part number I am trying to find out in which week of a month did the largest daily shipment occur... so using report builder 3.0
in SSRS 2012 I can find daily, weekly and monthly totals for the units shipped but I am having a hard time thinking through the logic to find the daily max for each week.
in my data I can have multiple orders/shipments for the same product on the same day.
The ultimate goal is to set inventory levels
So..
In my matrix report I have
Row groups:
Classid => Product class
InvtID => Item Part Number
Column Groups:
FiscYr=> Fiscal Year
PerPost => Month or period the transaction occurred
Week_period => the week the transaction occurred
Day_period => The day that the transaction occurred
The aggregations are
Sum(case_shipped)
Max(case_shipped)
The Sum(case_shipped) is working as desired but the Max(case_shipped) is picking out the max amount shipped on any one order when looking
at the week, month or fiscal period and that is not what I need.
I have attached a screenshot since a picture is worth more than my words. I have also included some sample data
I would very much appreciate any thoughts on this. I am guessing that the solution has something to do with using the inscope function but
I can't wrap my head around how to use it
Thank you
Tom D
Here is some sample data for Product A
Invtid Case_ship Trandate FiscYr PerPost week_period day_period
A 10 1/1/2104 2014 1
1 1
A 3 1/1/2014 2014 1
1 1
A 50 1/2/2104 2014 1
1 2
A 30 1/3/2014 2014 1
1 3
A 20 1/9/2104 2014 1
2 2
A 5 1/9/2104 2014 1
2 2
A 20 1/10/2014 2014 1
2 3
A 60 1/10/2104 2014 1
2 3
On 1/1/2104 I shipped a total of 13 cases
On 1/2/2104 I shipped a total of 50 cases
On 1/3/2104 I shipped a total of 30 cases
On 1/9/2014 I shipped a total of 30 cases
On 1/10/2014 I shipped a total of 80 cases
On 1/9 I shipped a total of 25 cases
I would like to show that in week 1 the maximum number of cases shipped on any day is 50 (1/2/2014)
I would like to show that in week 2 the maximum number of cases shipped on any day is 80 (1/10/2104)
I would also like to show that in perpost (month) 1 the maximum
number of cases shipped on any day is 80 (1/10/2104)

Hi
I was able to find a solution
I built a new dataset in report builder using the same table as before but tried out the "Group and Aggregate" function and for the case_ship
field I chose "Sum" as my aggregate.... In essence this gave me a very cool and easy daliy sum of the shipped cases.
When I used this new dataset and built my matrix report I was able to easily get the max daily shipment for each product by week, month and
year.
Tom

Integrating Reports Builder with JDEV

Hello,
I am studying how integrating a Report builded using Reports Builder with JDEV, because when I run from JDEV my JSP file which contains Reports, I am not manage get success. However, if my JSP has not Reports, then I get success in the execution. When I am running the JSP with has Reports, in the execution, the following error messages are displayed:
org.omg.CORBA.OBJ_ADAPTER: org.omg.CORBA.UNKNOWN: Unexpected User Exception: IDL:visigenic.com/Activation/NotRegistered:1.0 minor code: 0 completed: No minor code: 0 completed: No
     at com.inprise.vbroker.poa.BOAImpl.obj_is_ready(BOAImpl.java:374)
     at oracle.reports.server.RWServer.startServer(RWServer.java:558)
     at oracle.reports.server.RWServer.run(RWServer.java:198)
     at java.lang.Thread.run(Thread.java:484)
Someone, could help me?
Thanks.
Carla

Hello Carla,
The link indicated by Philipp just move to this URL
http://otn.oracle.com/products/reports/htdocs/getstart/GettingStarted/index/index.html. (Sorry for that)
Watch the Reports/JDev integration viewlets in the demonstration section.
To be able to execute a Reports JSP from JDev you should be in the JDeveloper of the 9iDS. (9i Developer Suite). You can also check you Jdev 'Run' property to check if the Embeded OC4J server starts with all IIOP parameter. (FYI:a Reports JSP communicate with the Reports Server using Corba)
1. Right click on you project in the system navigator
2. Choose 'Project Setting'
3. In the Runner Entry you should have a Java option like :
-Dorg.omg.CORBA.ORBClass=com.inprise.vbroker.orb.ORB -Dorg.omg.CORBA.ORBSingletonClass=com.inprise.vbroker.orb.ORB
(This option is automaticaly added if you select New, Reports JSP from JDeveloper)
Regards
Tugdual Grall

Unable to Start Report Builder

Hi,
I am new to report server. After installing it I am able to start Report Manager, however when I click on Report Builder button in Report manager, I get the following dialog:
Cannot download the aplication. The application is missing required files. Contact application vendor for assistance.
When I press the 'Details' button, I get this (pasting here):
PLATFORM VERSION INFO
Windows    : 6.1.7601.65536 (Win32NT)
Common Language Runtime : 4.0.30319.18052
System.Deployment.dll   : 4.0.30319.17929 built by: FX45RTMREL
clr.dll    : 4.0.30319.18052 built by: FX45RTMGDR
dfdll.dll    : 4.0.30319.17929 built by: FX45RTMREL
dfshim.dll    : 4.0.41209.0 (Main.041209-0000)
SOURCES
Deployment url   :
file:///C:/Users/Peter%20Battelino/Downloads/ReportBuilder_3_0_0_0%20(4).application
IDENTITIES
Deployment Identity  : ReportBuilder_3_0_0_0.application, Version=11.0.2100.60, Culture=neutral, PublicKeyToken=c3bce3770c238a49, processorArchitecture=x86
APPLICATION SUMMARY
* Online only application.
* Trust url parameter is set.
ERROR SUMMARY
Below is a summary of the errors, details of these errors are listed later in the log.
* Activation of C:\Users\Peter Battelino\Downloads\ReportBuilder_3_0_0_0 (4).application resulted in exception. Following failure messages were detected:
  + Downloading file:///C:/Users/Peter Battelino/Downloads/RptBuilder_3/MSReportBuilder.exe.manifest did not succeed.
  + Could not find a part of the path 'C:\Users\Peter Battelino\Downloads\RptBuilder_3\MSReportBuilder.exe.manifest'.
  + Could not find a part of the path 'C:\Users\Peter Battelino\Downloads\RptBuilder_3\MSReportBuilder.exe.manifest'.
  + Could not find a part of the path 'C:\Users\Peter Battelino\Downloads\RptBuilder_3\MSReportBuilder.exe.manifest'.
COMPONENT STORE TRANSACTION FAILURE SUMMARY
No transaction error was detected.
WARNINGS
There were no warnings during this operation.
OPERATION PROGRESS STATUS
* [7/25/2013 9:31:36 AM] : Activation of C:\Users\Peter Battelino\Downloads\ReportBuilder_3_0_0_0 (4).application has started.
* [7/25/2013 9:31:36 AM] : Processing of deployment manifest has successfully completed.
* [7/25/2013 9:31:36 AM] : Installation of the application has started.
ERROR DETAILS
Following errors were detected during this operation.
* [7/25/2013 9:31:36 AM] System.Deployment.Application.DeploymentDownloadException (Unknown subtype)
  - Downloading file:///C:/Users/Peter Battelino/Downloads/RptBuilder_3/MSReportBuilder.exe.manifest did not succeed.
  - Source: System.Deployment
  - Stack trace:
   at System.Deployment.Application.SystemNetDownloader.DownloadSingleFile(DownloadQueueItem next)
   at System.Deployment.Application.SystemNetDownloader.DownloadAllFiles()
   at System.Deployment.Application.FileDownloader.Download(SubscriptionState subState)
   at System.Deployment.Application.DownloadManager.DownloadManifestAsRawFile(Uri& sourceUri, String targetPath, IDownloadNotification notification, DownloadOptions options, ServerInformation& serverInformation)
   at System.Deployment.Application.DownloadManager.DownloadApplicationManifest(AssemblyManifest deploymentManifest, String targetDir, Uri deploymentUri, IDownloadNotification notification, DownloadOptions options, Uri& appSourceUri, String&
appManifestPath)
   at System.Deployment.Application.DownloadManager.DownloadApplicationManifest(AssemblyManifest deploymentManifest, String targetDir, Uri deploymentUri, Uri& appSourceUri, String& appManifestPath)
   at System.Deployment.Application.ApplicationActivator.DownloadApplication(SubscriptionState subState, ActivationDescription actDesc, Int64 transactionId, TempDirectory& downloadTemp)
   at System.Deployment.Application.ApplicationActivator.InstallApplication(SubscriptionState& subState, ActivationDescription actDesc)
   at System.Deployment.Application.ApplicationActivator.PerformDeploymentActivation(Uri activationUri, Boolean isShortcut, String textualSubId, String deploymentProviderUrlFromExtension, BrowserSettings browserSettings, String& errorPageUrl)
   at System.Deployment.Application.ApplicationActivator.ActivateDeploymentWorker(Object state)
  --- Inner Exception ---
  System.Net.WebException
  - Could not find a part of the path 'C:\Users\Peter Battelino\Downloads\RptBuilder_3\MSReportBuilder.exe.manifest'.
  - Source: System
  - Stack trace:
   at System.Net.FileWebRequest.EndGetResponse(IAsyncResult asyncResult)
   at System.Net.FileWebRequest.GetResponse()
   at System.Deployment.Application.SystemNetDownloader.DownloadSingleFile(DownloadQueueItem next)
  --- Inner Exception ---
  System.Net.WebException
  - Could not find a part of the path 'C:\Users\Peter Battelino\Downloads\RptBuilder_3\MSReportBuilder.exe.manifest'.
  - Source: System
  - Stack trace:
   at System.Net.FileWebResponse..ctor(FileWebRequest request, Uri uri, FileAccess access, Boolean asyncHint)
   at System.Net.FileWebRequest.GetResponseCallback(Object state)
  --- Inner Exception ---
  System.IO.DirectoryNotFoundException
  - Could not find a part of the path 'C:\Users\Peter Battelino\Downloads\RptBuilder_3\MSReportBuilder.exe.manifest'.
  - Source: mscorlib
  - Stack trace:
   at System.IO.__Error.WinIOError(Int32 errorCode, String maybeFullPath)
   at System.IO.FileStream.Init(String path, FileMode mode, FileAccess access, Int32 rights, Boolean useRights, FileShare share, Int32 bufferSize, FileOptions options, SECURITY_ATTRIBUTES secAttrs, String msgPath, Boolean bFromProxy, Boolean
useLongPath, Boolean checkHost)
   at System.IO.FileStream..ctor(String path, FileMode mode, FileAccess access, FileShare share, Int32 bufferSize, FileOptions options, String msgPath, Boolean bFromProxy)
   at System.IO.FileStream..ctor(String path, FileMode mode, FileAccess access, FileShare share, Int32 bufferSize, Boolean useAsync)
   at System.Net.FileWebStream..ctor(FileWebRequest request, String path, FileMode mode, FileAccess access, FileShare sharing, Int32 length, Boolean async)
   at System.Net.FileWebResponse..ctor(FileWebRequest request, Uri uri, FileAccess access, Boolean asyncHint)
COMPONENT STORE TRANSACTION DETAILS
No transaction information is available.
Does anybody know what the rpoble is?
Thank you in advance.
Peter Battelino
BTE Corporation
PMBT

Hi Pmbt,
From your description, you cannot start Report Builder using Google Chrome, right? In Reporting Services, you use a Web browser to view reports and run Report Manager. Not all report functionality is supported by all browsers. Google Chrome is not a supported
browser for SSRS. So we recommend you to start Report Builder using IE. For the detail information about it, please see:
http://msdn.microsoft.com/en-us/library/ms156511(v=sql.105).aspx
http://social.technet.microsoft.com/Forums/sqlserver/en-US/f50eb196-3f15-408d-acb7-7f90e3348e3e/why-does-the-ssrs-calendar-control-not-work-in-google-chrome-but-plenty-of-other-websites-with
If you have any questions, please feel free to ask.
Regards,
Charlie Liao
TechNet Community Support

Report Service And Report Builder Issue

SQL SERVE 2012
In our web site project we use ReportingService2010 Methods to show and operate folder and report which stored in Report Service, in our project configuration file, we use windows authentication mode for Report Service.
In requirement
User can show and operate folder “A” and folder “B” (we can create and delete report or folder) in web site.
User can’t use “Report Builder” to save reports which created by Report Builder to folder “B”, Reports which created by Report Builder only can be saved in folder “A”.
[User click “Report Builder” button in our web page to start Report Builder, use
“Report Builder” to create report, if user want to save report, we need to hidden folder “B” in “Report Builder” or we need to remove some operate right from folder “B”.]
We have no solution for this requirement, could you help us?

Thank you for your replay, but I don't understand it very clearly.
Please check the first requirement:
User can show and operate folder “A” and folder “B” (we can create and delete report or folder) in web site.
For example, I login my PC with account "lfang", in report server, we grand "Browse" permission on both folder and grand only "Publish" permissions for folder "A", report builder can't save report into folder "B",
it's correct.
But our web site has create report function, that means in our web site we want to create report for both folder "A" and "B", that is the issue, if we don't give "Publish" permissions to folder
"B", we can't create report in our web site.
Is there any method to run "report builder" use specified account? then we can only give folder "A" "Publish" permissions with specified account.

Report Builder is not exist in fusion middleware forms&reports installation

Dear All,
i have installed oracle fusion middleware forms & report services ofm_frmrpts_win_11.1.2.1.0_64_disk1_1of1.
form builder is there, but the report builder is not there? why? where is report builder?
Regards.

Hi Maahjoor,
Try Starting Report Builder using the rwbuilder.bat found in the %ORACLE_INSTANCE%\config\reports\bin\ directory.
If you still getting issues
a)Backup the %ORACLE_INSTANCE%\config\reports\bin\ rwbuilder.bat file
b)Now modify rwbuilder.bat file from the %ORACLE_HOME%\bin\rwbuilder.bat file,by manually hard-coding the correct paths for:
$$Instance.directory$$\config\reports\bin\reports.bat
$$Instance.oracle_home$$\bin\rwbuilder.exeThat is, if your instance home is C:\Oracle\Middleware\as_inst1, then change the rwbuilder.bat to reflect:
C:\Oracle\Middleware\as_inst1\config\reports\bin\reports.bat
C:\Oracle\Middleware\as_inst1\bin\rwbuilder.exe
c)Then, re-execute the modified rwbuilder.bat file from the %ORACLE_INSTANCE%\config\reports\bin\ .
If it still doesnt work...
Follow these 2 metalink ID's ,They will be helpful
*REP-50125 "rwbuilder.conf:java.lang.NullPointerException" Trying To Open Reports Builder[Article ID 1532120.1]*
*Report Builder 11g on MS Windows Errors with: REP-50125[Article ID 1059638.1]*
Regards
Fabian

Report builder bitmap output

hi everyone.
I RUN A REPORT FROM REPORT BUILDER USING DESTINATION PRINTER AND MODE BITMAP TO A HP PRINTER(DESCJET D3940) AND THE REPORT CREATE A SMALL EPS FILE AND PRINT IN 10 SECONDS.
WHEN I PRINT THE SAME REPORT TO A DIFFERENT PRINTER (HP DESCJET D2660) THE OUTPUT IS TOO LARGE AND PRINT IN 5 MINUTES.I AM USING WINDOWS XP AND REPORT BUILDER 10.1.2.0.2.

Excel will remove leading zeros in a numeric field because it is treating the column as numeric. Putting a ' in front of the number forces Excel to treat the column as text.

Testing Reports within Reports Builder

I am using Oracle Reports Builder 9i 9.0.2.0.3.
I have created a simple report using a JDBC query and J_JDBCPDS.
I have saved the file as a RDF and a JSP.
I want to test this from within Reports Builder.
I created a simple selection.HTM file that has an HREF to my files
I try
HREF="http://myserver:8888/reports/test/myreport.jsp?J_JDBCPDS='myserver:1433;DatabaseName=mydatabase">My Report</a></p>
and
HREF="http://myserver:8888/reports/test/myreport.rdf?J_JDBCPDS='myserver:1433;DatabaseName=mydatabase">My Report</a></p>
So ...
I start OC4J.
browse to
http://myserver:8888/reports/test/select.htm
click on my links
but both times I get PAGE NOT FOUND.
How can I test the Reports Builder reports with just having Reports Builder?
Thanks,
Jeanne Vural

Jeanne
The href url is wrong in your selection.html page. Firstly for paper layout report, you should go through Reports servlet, that mean your url would be something like:
http://webserver:port//servlet/rwservlet?server=servername+report=reportname.....
For web layout reports also, your url will need the server info and i do not see any server param passed in the url.
Thanks
Rohit

SQL Server 2008 R2 - Report Builder 3.0 - timeout using shared data source and stored procedure

I select the shared datasource from the data source propeties dialog, test the connection and everything is good.
I add a dataset by selecting "use a dataset embedded in my report" option within the Dataset properties dialog.
I select the newly added data source, click the "Stored procedure" query type and drop down the list box and select my intended stored procedure.
the timeout for the dataset is "0" seconds.
I click the "OK" button and I'm presented with the parameters to the stored procedure.
I enter valid data for the parameters and click the "OK" button.
I then get the following error message after 30 seconds:
The problem is, all of the timeouts, that I'm aware of, have values of zero (no timeout) or high enough values that 30 seconds isn't even close to the timeout.
I think the smallest timeout we have is 120 seconds.
I have searched this site and many others and the solutions all involve altering the stored procedure to get the fields into report builder and then revert the stored procedure back to its original form.
To me, this is NOT a solution.
I have too many stored procedures that need to be brought into Report Builder.
I need a real solution.
Thank you for you time, Tim Caldwell.
Timothy E Caldwell

I don't mean to be rude, but really, check to see if the stored procedure can return data rows???
Maybe I'm not being clear enough.
The stored procedure runs perfectly fine.
it runs perfectly fine in the production environment and the test environment.
I can access the stored procedure in several ways and have it return correct data.
I can even trick report builder into creating a dataset with parameters and run the stored procedure that way.
What I cannot do, is to get report builder to not timeout after 30 seconds on the initial creation of a dataset with a Query type of stored procedure.
I have seen this issues posted again and again and again on may different sites and the "solution" is to simplifiy the stored procedure by creating a stored procedure that has a create table and a select in the stored procedure and that's it. After
report builder creates the dataset the developer then has to replace the simplified stored procedure with the actual stored procedure and everything works fine after that.
HOWEVER, having to go through this process for 70 or more stored procedures is ridiculous.
It would appear that there is something within report builder itself that is causing this issue.
The SQL Script included is an example of a stored procedure that will not create fields create a dataset with fields and parameters in Report Builder 3.0:
USE [CRUM_IT]
GO
/****** Object: StoredProcedure [dbo].[COGNOS_Level5ScriptSP] Script Date: 11/17/2014 08:02:26 ******/
SET ANSI_NULLS ON
GO
SET QUOTED_IDENTIFIER ON
GO
ALTER procedure [dbo].[COGNOS_Level5ScriptSP]
@CompanyCode varchar(8) = null,
@GetSiblings varchar(1) = 'N'
as
Begin
-- get emergency contact info
select *
into #tmp_Contacts
from
(select
ConEEID,
con.connamelast as [Emer Contact Last Name],
con.connamefirst as [Emer Contact First Name],
con.connamemiddle as [Emer Contact Middle Initial/Name]--,
,ROW_NUMBER() over (Partition by ConEEID order by ConNameLast)as rn
,ISNULL(
case when con.conphonepreferred = 'H'
then '(' + substring(con.conphonehomenumber, 1, 3) + ')' + substring(con.conphonehomenumber, 4, 3) + '-' + substring(con.conphonehomenumber, 7, 4)
else '(' + substring(con.conphoneothernumber , 1, 3) + ')' + substring(con.conphoneothernumber , 4, 3) + '-' + substring(con.conphoneothernumber , 7, 4)
end,
) as [Emergency Phone]
from [ultiprosqlprod1].[ultipro_crum].dbo.Contacts con
where con.ConIsEmergencyContact='y'
and con.ConIsActive='y'
) A
where A.rn = 1
CREATE TABLE #tmp_CompanyCodes (CompanyCode varchar(8))
If @GetSiblings = 'Y'
Begin
INSERT INTO #tmp_CompanyCodes (CompanyCode)
EXEC [z_GetClientNumbers_For_ParentOrg_By_ClientNumber] @CompanyCode
End
INSERT INTO #tmp_CompanyCodes
values (@CompanyCode)
select *
into #tmp_Company
from [ultiprosqlprod1].[ultipro_crum].dbo.Company
where cmpcompanycode in (select CompanyCode from #tmp_CompanyCodes)
select distinct
cmpcompanycode as [Client ID],
CmpCompanyDBAName as [Client Name],
eec.eecEmplStatus AS [Employment Status],
eec.eecEmpNo AS [Employee Num],
rtrim(eep.eepNameLast) AS [Last Name],
rtrim(eep.eepNameFirst) AS [First Name],
isnull(rtrim(ltrim(eep.eepNameMiddle)), '') AS [Middle Initial/Name],
rtrim(eep.eepAddressLine1) AS [Address Line 1],
isnull(rtrim(eep.eepAddressLine2), '') AS [Address Line 2],
eep.eepAddressCity AS [City],
eep.eepAddressState AS [State],
CASE
WHEN len(eep.eepAddressZipCode) > 5 and charindex(eep.eepAddressZipCode, '-', 1) = 0
THEN substring(eep.eepAddressZipCode, 1, 5)
ELSE rtrim(eep.eepAddressZipCode)
END AS [Zip code],
CASE
WHEN len(eep.eepAddressZipCode) > 5 and charindex(eep.eepAddressZipCode, '-', 1) = 0
THEN substring(eep.eepAddressZipCode, 6, 4)
WHEN len(eep.eepAddressZipCode) > 5 and charindex(eep.eepAddressZipCode, '-', 1) > 0
THEN substring(eep.eepAddressZipCode, charindex(eep.eepAddressZipCode, '-', 1) + 1, 4)
WHEN len(eep.eepAddressZipCode) <= 5
THEN ''
END AS [ZIP + 4],
substring(eep.eepSSN, 1, 3) + '-' + substring(eep.eepSSN, 4, 2) + '-' + substring(eep.eepSSN, 6, 4) AS [SSN],
isnull(convert(VARCHAR(10), eep.eepDateOfBirth, 101), '') AS [Date Of Birth],
eetFED.TAXCODE AS [FED Tax Code],
eetFED.FILINGSTATUS AS [Fed Filing Status],
eetFED.EXEMPTIONS AS [Fed Exemption Allowance],
eetFED.ADDITIONAL AS [Additional Fed Withholding],
eetSIT.TAXCODE AS [SIT Tax Code],
eetSIT.FILINGSTATUS AS [State Filing Status],
eetSIT.EXEMPTIONS AS [State Exemption Allowance],
eetSIT.ADDITIONAL AS [Additional State Withholding],
isnull('(' + substring(eep.eepPhoneHomeNumber, 1, 3) + ')' + substring(eep.eepPhoneHomeNumber, 4, 3) + '-' + substring(eep.eepPhoneHomeNumber, 7, 4), '') AS [Home Phone],
isnull((SELECT cod.codDesc
FROM [ultiprosqlprod1].[ultipro_crum].dbo.Codes cod WITH (NOLOCK)
WHERE cod.codCode = eep.eepEthnicID
AND cod.codDosTable = 'ETHNICCODE'), '') AS [Race-Origin], --eep.eepEthnicID AS [Race-Origin],
eep.eepGender AS [Gender],
isnull(convert(VARCHAR(10), eec.eecDateOfOriginalHire, 101), '') AS [Original Hire Date],
isnull(convert(VARCHAR(10), eec.eecDateOfSeniority, 101), '') AS [Seniority Date],
isnull(convert(VARCHAR(10), eec.eecDateOfTermination, 101), '') AS [Termination Date],
isnull(eecTermType,'') as [Termination Type],
isnull(TchDesc, '') as [Termination Reason],
rtrim(eec.eecJobCode) AS [WC Code],
isnull(eec.eecJobTitle, '') AS [Job Title],
pgr.pgrPayFrequency AS [Pay Frequency],
eec.eecFullTimeOrPartTime AS [Full/Part Time],
eec.eecSalaryOrHourly AS [Pay Type],
isnull(convert(MONEY, eec.eecHourlyPayRate), 0.00) AS [Hourly Rate],
isnull(eec.eecAnnSalary, 0.00) AS [Annual Salary],
[YTD Hours],
isnull(eep.eepNameFormer, '') AS [Maiden Name],
eec.eecLocation AS [Location ID],
rtrim(eec.eecOrgLvl1) AS [Department ID],
eec.eecorglvl2 AS [Cost Item],
eec.eecorglvl3 as [Client Project],
eec.eecPayGroup as [Pay Group],
isnull(eepAddressEMail,' ') as [Email Address],
isNull(BankName1,' ') as PrimaryBank,
isNull(BankRoute1,' ') as PrimaryRouteNum,
isNull(Account1,' ') as PrimaryAccount,
isNull(AcctType1,' ') as PrimaryAcctType,
isNull(DepositRule1,' ') as PrimaryDepositRule,
isNull(BankName2,' ') as SecondaryBank,
isNull(BankRoute2,' ') as SecondaryRouteNum,
isNull(Account2,' ') as SecondaryAccount,
isNull(AcctType2,' ') as SecondaryAcctType,
isNull(DepositRule2,' ') as SecondaryDepositRule,
isNull(
CASE
WHEN DepositRule2 = 'D'
THEN '$' + convert(varchar, cast(EddAmtOrPct2 AS decimal(10,2)))
WHEN DepositRule2 = 'P'
THEN convert(varchar, cast((EddAmtOrPct2*100) AS decimal(10,0))) + '%'
ELSE null
END,' ') as SecondaryDepositAmount,
isNull(BankName3,' ') as ThirdBank,
isNull(BankRoute3,' ') as ThirdRouteNum,
isNull(Account3,' ') as ThirdAccount,
isNull(AcctType3,' ') as ThirdAcctType,
isNull(DepositRule3,' ') as ThirdDepositRule,
isNull(
CASE
WHEN DepositRule3 = 'D'
THEN '$' + convert(varchar, cast(EddAmtOrPct3 AS decimal(10,2)))
WHEN DepositRule3 = 'P'
THEN convert(varchar, cast((EddAmtOrPct3*100) AS decimal(10,0))) + '%'
ELSE null
END,' ') as ThirdDepositAmount,
Supervisor,
eec.eecEEID AS [Employee EEID],
eec.EecJobCode As [Job Code],
isnull(eec.EecTimeclockID,' ') As [Time Clock ID],
con.[Emer Contact Last Name],
con.[Emer Contact First Name],
con.[Emer Contact Middle Initial/Name],
con.[Emergency Phone]
from [ultiprosqlprod1].[ultipro_crum].dbo.empPers eep WITH (NOLOCK)
inner join [ultiprosqlprod1].[ultipro_crum].dbo.empComp eec WITH (NOLOCK)
ON eep.eepEEID = eec.eecEEID
inner join #tmp_Company cmp WITH (NOLOCK)
ON eec.eecCOID = cmp.cmpCOID
inner join [ultiprosqlprod1].[ultipro_crum].dbo.PayGroup pgr WITH (NOLOCK)
ON eec.eecPayGroup = pgr.pgrPayGroup
left outer join [ultiprosqlprod1].[ultipro_crum].dbo.TrmReasn
on tchCode = eecTermReason
left join (select CAST(sum(isnull(eee.eeeYTDHrs,0.00))AS DECIMAL(18,2)) as [YTD Hours],
eeeEEID,
eeeCOID
from [ultiprosqlprod1].[ultipro_crum].dbo.EmpEarn eee with (NOLOCK)
group by eeeCOID,eeeEEID)eee
on eec.eecEEID = eee.eeeEEID
and eec.eecCOID = eee.eeeCOID
left join (SELECT eetCOID AS COID,
eetEEID AS EEID,
eetTaxCode AS TAXCODE,
eetFilingStatus AS FILINGSTATUS,
eetExemptions AS EXEMPTIONS,
eetExtraTaxDollars AS ADDITIONAL
FROM [ultiprosqlprod1].[ultipro_crum].dbo.empTax WITH (NOLOCK)
WHERE eetTaxCode = 'USFIT'
)eetFED
ON eec.eecCOID = eetFED.COID
and eec.eecEEID = eetFED.EEID
left join (SELECT eetCOID AS COID,
eetEEID AS EEID,
eetTaxCode AS TAXCODE,
eetFilingStatus AS FILINGSTATUS,
eetExemptions AS EXEMPTIONS,
eetExtraTaxDollars AS ADDITIONAL
FROM [ultiprosqlprod1].[ultipro_crum].dbo.empTax WITH (NOLOCK)
WHERE eetTaxCode like '%SIT'
AND eetIsWorkInTaxCode = 'Y'
)eetSIT
ON eec.eecCOID = eetSIT.COID
and eec.eecEEID = eetSIT.EEID
left outer join (SELECT eddCOID,
eddEEID,
eddEEBankName BankName1,
eddEEBankRoute BankRoute1,
eddAcct Account1,
EddAcctType AcctType1,
EddDepositRule DepositRule1,
EddAmtOrPct EddAmtOrPct1
FROM [ultiprosqlprod1].[ultipro_crum].dbo.EmpDirDp WITH (NOLOCK)
WHERE eddSequence = '99')edd
ON eec.eecCOID = edd.eddCOID
and eec.eecEEID = edd.eddEEID
left outer join (SELECT eddCOID,
eddEEID,
eddEEBankName BankName2,
eddEEBankRoute BankRoute2,
eddAcct Account2,
EddAcctType AcctType2,
EddDepositRule DepositRule2,
EddAmtOrPct EddAmtOrPct2
FROM [ultiprosqlprod1].[ultipro_crum].dbo.EmpDirDp WITH (NOLOCK)
WHERE eddSequence = '01')edd2
ON eec.eecCOID = edd2.eddCOID
and eec.eecEEID = edd2.eddEEID
left outer join (SELECT eddCOID,
eddEEID,
eddEEBankName BankName3,
eddEEBankRoute BankRoute3,
eddAcct Account3,
EddAcctType AcctType3,
EddDepositRule DepositRule3,
EddAmtOrPct EddAmtOrPct3
FROM [ultiprosqlprod1].[ultipro_crum].dbo.EmpDirDp WITH (NOLOCK)
WHERE eddSequence = '02')edd3
ON eec.eecCOID = edd3.eddCOID
and eec.eecEEID = edd3.eddEEID
left outer join (SELECT eecCOID,
eecEEID,
rtrim(eepNameLast) + ', ' +
rtrim(eepNameFirst) + ' ' +
isnull(rtrim(ltrim(eepNameMiddle)), '') AS [Supervisor]
FROM [ultiprosqlprod1].[ultipro_crum].dbo.EmpComp WITH (NOLOCK)
join [ultiprosqlprod1].[ultipro_crum].dbo.EmpPers with (NoLock)
on eeceeid = eepeeid)eec2
ON eec.eecSupervisorID = eec2.eecEEID
left outer join #tmp_Contacts con
on eep.eepEEID = con.ConEEID
order by [Client ID],
[Last Name],
[First Name]
drop table #tmp_Contacts
END
Timothy E Caldwell

Testing reports outside of Reports Builder using Oc4J

Similar Messages

Maybe you are looking for