TestStand with perl and Tcl examples need newer dlls

I'm trying to run the TestStand with perl and tcl examples but they both point to older dlls. When I try to update by making changes and recompiling the main.cpp in VC++ 6.0, I get errors referencing cl.exe and oleauto.h, I'm not sure if I missed a step or what. See attached screenshot. TIA. Judy Jiru
Attachments:
scrnShotErrors.doc ‏110 KB

Hey Judy,
From my understanding oleauto.h and cl.exe are not National Instruments files. My suggestion would be to google the files - I found a bunch of hits for both the files. It may also be helpful to post on a discussion forum dedicated to VC++ 6.0. You may want to try the Microsoft newsgroups or I'm sure there are tons of other online.
I hope this helps! Once you compile the dll if you have problems calling it from TestStand please post back.
Regards,
Sarah Miracle
National Instruments

Similar Messages

Since installing IOS7.0.2 my iPad keeps rebooting itself every few minutes. I can't do anything with it and cannot download the new IOS7.2 because it doesn't run long enough to accomplish the download. What can I do?

Since installing IOS7.0.2 my iPad keeps rebooting itself every few minutes. I can't do anything with it and cannot download the new IOS7.2 because it doesn't run long enough to accomplish the download. What can I do?

Try a Restart.
Press and hold the Sleep/Wake button for a few seconds until the red "slide to power off" slider appears, and then slide the slider. Press and hold the Sleep/Wake button until the Apple logo appears.
Resetting your settings
You can also try resetting all settings. Settings>General>Reset>Reset All Settings. You will have to enter all of your device settings again.... All of the settings in the settings app will have to be re-entered. You won't lose any data, but it takes time to enter all of the settings again.
Resetting your device
Press and hold the Sleep/Wake button and the Home button together for at least ten seconds, until the Apple logo appears. Apple recommends this only if you are unable to restart it.
Or if this doesn't work and nobody else on the blog doesn't have a better idea you can contact Apple.
Here is a link to their contacts with most of the information below.
http://www.apple.com/contact/

Problems with SwingWorker and classes in my new job, ;), can you help me?

Hi all, ;)
First of all, sorry about my poor English.
I have a problem with Swing and Threads, I hope you help me (because I'm in the firsts two weeks in my new job)
I have two classes:
Form1: Its a JPanel class with JProgressBar and JLabel inside.
FormularioApplet: (the main) Its a JPanel class with a form1 inside.
I have to download a file from a server and show the progress of the download in the JProgressBar. To make it I do this:
In Form1 I make a Thread that update the progress bar and gets the fole from the server.
In FormularioApplet (the main) I call to the method getDownloadedFile from Form1 to get the File.
THE PROBLEM:
The execution of FormularioApplet finishes before the Thread of Form1 (with download the file) download the file. Then, when I call in FormularioApplet the variable with the file an Exception: Exception in thread "AWT-EventQueue-1" java.lang.NullPointerException is generated.
First main begins his execution, then call to Form1 (a thread) then continues his execution and when the execution is finished ends the execution os Form1 and his thread.
How can I do for main class call the function and the Thread download his file after main class assign the file of return method?
How can I pass information froma class include an a main class. Form1 can't send to main (because main class made a Form1 f1 = new Form1()) any information from his end of the execution. I think if Form1 can say to main class that he finishes is job, then main class can gets the file.
I put in bold the important lines.
Note: My level of JAVA, you can see, is not elevated.
THANKS A LOT
Form1 class:
package es.cambrabcn.signer.gui;
import java.awt.HeadlessException;
import java.io.ByteArrayOutputStream;
import java.io.IOException;
import java.io.InputStream;
import java.net.MalformedURLException;
import java.net.URL;
import java.util.StringTokenizer;
import java.util.Vector;
import javax.swing.SwingUtilities;
public class Form1 extends javax.swing.JPanel {
    //Variables relacionadas con la clase original DownloadProgressBar
    private InputStream file;
    private int totalCicles;
    private int totalFiles;
    private int currentProgress;
    private SwingWorker worker;
    private ByteArrayOutputStream byteArray;
    private boolean done;
    /** Creates new form prueba */
    public Form1() {
        initComponents();
        this.byteArray = new ByteArrayOutputStream();
        progressBar.setStringPainted(true);
        //this.totalFiles = totalFiles;
        currentProgress = 0;
    /** This method is called from within the constructor to
     * initialize the form.
     * WARNING: Do NOT modify this code. The content of this method is
     * always regenerated by the Form Editor.
    // <editor-fold defaultstate="collapsed" desc=" C�digo Generado ">
    private void initComponents() {
        label1 = new javax.swing.JLabel();
        progressBar = new javax.swing.JProgressBar();
        statusLabel = new javax.swing.JLabel();
        setBackground(new java.awt.Color(255, 255, 255));
        setMaximumSize(new java.awt.Dimension(300, 150));
        setMinimumSize(new java.awt.Dimension(300, 150));
        setPreferredSize(new java.awt.Dimension(300, 150));
        label1.setFont(new java.awt.Font("Arial", 1, 18));
        label1.setHorizontalAlignment(javax.swing.SwingConstants.CENTER);
        label1.setText("Barra de progreso");
        statusLabel.setHorizontalAlignment(javax.swing.SwingConstants.CENTER);
        statusLabel.setText("Cargando");
        org.jdesktop.layout.GroupLayout layout = new org.jdesktop.layout.GroupLayout(this);
        this.setLayout(layout);
        layout.setHorizontalGroup(
            layout.createParallelGroup(org.jdesktop.layout.GroupLayout.LEADING)
            .add(org.jdesktop.layout.GroupLayout.TRAILING, layout.createSequentialGroup()
                .addContainerGap()
                .add(layout.createParallelGroup(org.jdesktop.layout.GroupLayout.TRAILING)
                    .add(org.jdesktop.layout.GroupLayout.LEADING, statusLabel, org.jdesktop.layout.GroupLayout.DEFAULT_SIZE, 280, Short.MAX_VALUE)
                    .add(org.jdesktop.layout.GroupLayout.LEADING, progressBar, org.jdesktop.layout.GroupLayout.DEFAULT_SIZE, 280, Short.MAX_VALUE)
                    .add(org.jdesktop.layout.GroupLayout.LEADING, label1, org.jdesktop.layout.GroupLayout.DEFAULT_SIZE, 280, Short.MAX_VALUE))
                .addContainerGap())
        layout.setVerticalGroup(
            layout.createParallelGroup(org.jdesktop.layout.GroupLayout.LEADING)
            .add(layout.createSequentialGroup()
                .addContainerGap()
                .add(label1)
                .addPreferredGap(org.jdesktop.layout.LayoutStyle.RELATED)
                .add(progressBar, org.jdesktop.layout.GroupLayout.PREFERRED_SIZE, org.jdesktop.layout.GroupLayout.DEFAULT_SIZE, org.jdesktop.layout.GroupLayout.PREFERRED_SIZE)
                .addPreferredGap(org.jdesktop.layout.LayoutStyle.RELATED)
                .add(statusLabel)
                .addContainerGap(73, Short.MAX_VALUE))
    }// </editor-fold>
    // Declaraci�n de variables - no modificar
    private javax.swing.JLabel label1;
    private javax.swing.JProgressBar progressBar;
    private javax.swing.JLabel statusLabel;
    // Fin de declaraci�n de variables
    public byte[] getDownloadedFile(String documentToSign){
         //Variables locales
         byte puente[] = null;
         try{
            //Leemos el documento a firmar
            StringTokenizer st = new StringTokenizer(documentToSign, ";");
            Vector<URL> fileURL = new Vector<URL>();
            HttpSender sender = new HttpSender(null);
            //Introducimos la lista de URLs de archivos a bajar en el objeto Vector
            for(; st.hasMoreTokens(); fileURL.add(new URL(st.nextToken())));
            //Para cada URL descargaremos un archivo
            for(int i = 0; i < fileURL.size(); i++) {
                file = sender.getMethod((URL)fileURL.get(i));
                if(file == null) {
                    Thread.sleep(1000L);
                    throw new RuntimeException("Error descarregant el document a signar.");
                System.out.println("Form1 Dentro de getDownloadFile, Antes de startDownload()");
                //Fijamos el valor del n�mero de ciclos que se har�n seg�n el tama�o del fichero
                this.totalCicles = sender.returnCurrentContentLength() / 1024;
                this.progressBar.setMaximum(totalCicles);
                //Modificamos el texto del JLabel seg�n el n�mero de fichero que estemos descargando
                this.statusLabel.setText((new StringBuilder("Descarregant document ")).append(i + 1).append(" de ").append(fileURL.size()).toString());
                statusLabel.setAlignmentX(0.5F);
                *//Iniciamos la descarga del fichero, este m�todo llama internamente a un Thread*
                *this.startDownload();*
                *System.out.println("Form1 Dentro de getDownloadFile, Despu�s de startDownload()");*
                *//if (pane.showProgressDialog() == -1) {*
                *while (!this.isDone()){*
                    *System.out.println("No est� acabada la descarga");*
                    *if (this.isDone()){*
                        *System.out.println("Thread ACABADO --> Enviamos a puente el archivo");*
                        *puente = this.byteArray.toByteArray();*
                        *System.out.println("Form1 getDownloadFile() tama�o puente: " + puente.length);*
                    *else{*
                        *Thread.sleep(5000L);*
*//                        throw new RuntimeException("Proc�s de desc�rrega del document a signar cancel�lat.");*
        catch (HeadlessException e) {
                //javascript("onSignError", new String[] {
                //(new StringBuilder("UI: ")).append(e.getMessage()).toString()});
        e.printStackTrace();
        catch (MalformedURLException e) {
                //javascript("onSignError", new String[] {
                //(new StringBuilder("CMS: ")).append(e.getMessage()).toString()});
        e.printStackTrace();
        catch (HttpSenderException e) {
                //javascript("onSignError", new String[] {
                //(new StringBuilder("CMS: ")).append(e.getMessage()).toString()});
        e.printStackTrace();
        catch (InterruptedException e) {
                //javascript("onSignError", new String[] {
                //(new StringBuilder("CMS: ")).append(e.getMessage()).toString()});
        e.printStackTrace();
        //System.out.println("Form1 getDownloadFile() tama�o puente: " + puente.length);
        return puente;
    public void updateStatus(final int i){
        Runnable doSetProgressBarValue = new Runnable() {
            public void run() {
                progressBar.setValue(i);
        SwingUtilities.invokeLater(doSetProgressBarValue);
    public void startDownload() {
        System.out.println("Form1 Inicio startDownload()");
        System.out.println("Form1 Dentro de startDownload, antes de definir la subclase SwingWorker");
        System.out.println(done);
        worker = new SwingWorker() {
            public Object construct() {
                System.out.println("Form1 Dentro de startDownload, dentro de construct(), Antes de entrar en doWork()");
                return doWork();
            public void finished() {
                System.out.println("Form1 Dentro de startDownload, dentro de finished(), Antes de asignar done = true");
                System.out.println(done);
                done = true;
                System.out.println("Form1 Dentro de startDownload, dentro de finished(), Despu�s de asignar done = true");
                System.out.println(done);
                statusLabel.setText("Completado, tama�o del archivo: " + (byteArray.size() / 1024) + "KB");
        System.out.println("Form1 Dentro de startDownload, antes de worker.start()");
        worker.start();
        System.out.println("Form1 Dentro de startDownload, antes de salir de startDownload");
        System.out.println(done);
        System.out.println("Form1 Dentro de startDownload, despu�s de worker.start()");
     * M�todo doWork()
     * Este m�todo descarga por partes el archivo que es necesario descargar, adem�s de actualizar
     * la barra de carga del proceso de carga de la GUI.
    public Object doWork() {
        System.out.println("Form1 doWork() this.byteArray.size(): " + this.byteArray.size());
        try {
            byte buffer[] = new byte[1024];
            for(int c = 0; (c = this.file.read(buffer)) > 0;) {
                this.currentProgress++;
                updateStatus(this.currentProgress);
                this.byteArray.write(buffer, 0, c);
            this.byteArray.flush();
            this.file.close();
            this.currentProgress = totalCicles;
            updateStatus(this.currentProgress);
        } catch(IOException e) {
            e.printStackTrace();
        System.out.println("Form1 doWork() FINAL this.byteArray.size(): " + this.byteArray.size());
        //done = true;
        System.out.println("AHORA DONE = TRUE");
        return "Done";
    public boolean isDone() {
        return this.done;
FormularioApplet class (main)
package es.cambrabcn.signer.gui;
import java.awt.Color;
import java.io.File;
import java.io.FileNotFoundException;
import java.io.IOException;
import java.net.URL;
import java.security.Security;
import java.util.StringTokenizer;
import java.util.Vector;
import javax.swing.SwingUtilities;
import netscape.javascript.JSObject;
import org.bouncycastle.jce.provider.BouncyCastleProvider;
import sun.security.provider.Sun;
import be.cardon.cryptoapi.provider.CryptoAPIProvider;
public class FormularioApplet extends java.applet.Applet {
    //Variables globales
    int paso = 0;
    private static final String JS_ONLOAD = "onLoad";
    private static final String JS_ONLOADERROR = "onLoadError";
    private static final int SIGNATURE_PDF = 1;
    private static final int SIGNATURE_XML = 2;
    //private String signButtonValue;
    private int signatureType;
    private String documentToSign;
    private String pdfSignatureField;
    private Vector<String> outputFilename;
    private Color appletBackground = new Color(255, 255, 255);
    private Vector<byte[]> ftbsigned;
     * Initializes the applet FormularioApplet
    public void init(){
        try {
            SwingUtilities.invokeLater(new Runnable() {
            //SwingUtilities.invokeAndWait(new Runnable() {
            //java.awt.EventQueue.invokeAndWait(new Runnable() {
                public void run() {
                    try{
                        readParameters();
                        initComponents();
                    catch(FileNotFoundException e){
                        javascript(JS_ONLOADERROR, new String[] {
                            (new StringBuilder("Init: ")).append(e.getMessage()).toString()});
                        e.printStackTrace();
                    catch(IOException e) {
                        javascript(JS_ONLOADERROR, new String[] {
                            (new StringBuilder("Init: ")).append(e.getMessage()).toString()});
                        e.printStackTrace();
        catch (Exception e) {
            javascript(JS_ONLOADERROR, new String[] {
                (new StringBuilder("Init: ")).append(e.getMessage()).toString()});
            e.printStackTrace();
        javascript(JS_ONLOAD, null);
    /** This method is called from within the init() method to
     * initialize the form.
     * WARNING: Do NOT modify this code. The content of this method is
     * always regenerated by the Form Editor.
    // <editor-fold defaultstate="collapsed" desc=" C�digo Generado ">
    private void initComponents() {
        this.setSize(350, 450);
        appletPanel = new javax.swing.JPanel();
        jPanel1 = new javax.swing.JPanel();
        jTextField1 = new javax.swing.JLabel();
        jPanel2 = new javax.swing.JPanel();
        label = new javax.swing.JLabel();
        jPanel3 = new javax.swing.JPanel();
        jButton1 = new javax.swing.JButton();
        jButton2 = new javax.swing.JButton();
        setLayout(new java.awt.BorderLayout());
        appletPanel.setBackground(new java.awt.Color(255, 255, 255));
        appletPanel.setMaximumSize(new java.awt.Dimension(350, 430));
        appletPanel.setMinimumSize(new java.awt.Dimension(350, 430));
        appletPanel.setPreferredSize(new java.awt.Dimension(350, 430));
        jPanel1.setBackground(new java.awt.Color(255, 255, 255));
        jPanel1.setBorder(javax.swing.BorderFactory.createLineBorder(new java.awt.Color(0, 102, 204)));
        jTextField1.setFont(new java.awt.Font("Arial", 1, 18));
        jTextField1.setHorizontalAlignment(javax.swing.SwingConstants.CENTER);
        jTextField1.setText("SIGNATURA ELECTRONICA");
        org.jdesktop.layout.GroupLayout jPanel1Layout = new org.jdesktop.layout.GroupLayout(jPanel1);
        jPanel1.setLayout(jPanel1Layout);
        jPanel1Layout.setHorizontalGroup(
            jPanel1Layout.createParallelGroup(org.jdesktop.layout.GroupLayout.LEADING)
            .add(jPanel1Layout.createSequentialGroup()
                .addContainerGap()
                .add(jTextField1, org.jdesktop.layout.GroupLayout.DEFAULT_SIZE, 308, Short.MAX_VALUE)
                .addContainerGap())
        jPanel1Layout.setVerticalGroup(
            jPanel1Layout.createParallelGroup(org.jdesktop.layout.GroupLayout.LEADING)
            .add(jPanel1Layout.createSequentialGroup()
                .addContainerGap()
                .add(jTextField1, org.jdesktop.layout.GroupLayout.DEFAULT_SIZE, 24, Short.MAX_VALUE)
                .addContainerGap())
        jPanel2.setBackground(new java.awt.Color(255, 255, 255));
        jPanel2.setBorder(javax.swing.BorderFactory.createLineBorder(new java.awt.Color(0, 102, 204)));
        label.setHorizontalAlignment(javax.swing.SwingConstants.CENTER);
        label.setIcon(new javax.swing.ImageIcon("C:\\java\\workspaces\\cambrabcn\\firmasElectronicas\\logo.gif"));
        org.jdesktop.layout.GroupLayout jPanel2Layout = new org.jdesktop.layout.GroupLayout(jPanel2);
        jPanel2.setLayout(jPanel2Layout);
        jPanel2Layout.setHorizontalGroup(
            jPanel2Layout.createParallelGroup(org.jdesktop.layout.GroupLayout.LEADING)
            .add(jPanel2Layout.createSequentialGroup()
                .addContainerGap()
                .add(label, org.jdesktop.layout.GroupLayout.DEFAULT_SIZE, 308, Short.MAX_VALUE)
                .addContainerGap())
        jPanel2Layout.setVerticalGroup(
            jPanel2Layout.createParallelGroup(org.jdesktop.layout.GroupLayout.LEADING)
            .add(jPanel2Layout.createSequentialGroup()
                .addContainerGap()
                .add(label)
                .addContainerGap(229, Short.MAX_VALUE))
        jPanel3.setBackground(new java.awt.Color(255, 255, 255));
        jPanel3.setBorder(javax.swing.BorderFactory.createLineBorder(new java.awt.Color(0, 102, 204)));
        //this.jButton1.setVisible(false);
        //this.jButton2.setVisible(false);
        jButton1.setText("Seg\u00fcent");
        jButton1.setAlignmentX(0.5F);
        //Cargamos el primer formulario en el JPanel2
        loadFirstForm();
        //Modificamos el texto del bot�n y el contador de pasos.
        //this.jButton1.setText("Siguiente");
        //this.jButton1.setVisible(true);
        //this.jButton2.setVisible(true);
        jButton1.addActionListener(new java.awt.event.ActionListener() {
            public void actionPerformed(java.awt.event.ActionEvent evt) {
                jButton1ActionPerformed(evt);
        jButton2.setText("Cancel\u00b7lar");
        jButton2.addActionListener(new java.awt.event.ActionListener() {
            public void actionPerformed(java.awt.event.ActionEvent evt) {
                jButton2ActionPerformed(evt);
        org.jdesktop.layout.GroupLayout jPanel3Layout = new org.jdesktop.layout.GroupLayout(jPanel3);
        jPanel3.setLayout(jPanel3Layout);
        jPanel3Layout.setHorizontalGroup(
            jPanel3Layout.createParallelGroup(org.jdesktop.layout.GroupLayout.LEADING)
            .add(org.jdesktop.layout.GroupLayout.TRAILING, jPanel3Layout.createSequentialGroup()
                .addContainerGap()
                .add(jButton1, org.jdesktop.layout.GroupLayout.PREFERRED_SIZE, 94, org.jdesktop.layout.GroupLayout.PREFERRED_SIZE)
                .addPreferredGap(org.jdesktop.layout.LayoutStyle.RELATED, 112, Short.MAX_VALUE)
                .add(jButton2, org.jdesktop.layout.GroupLayout.PREFERRED_SIZE, 102, org.jdesktop.layout.GroupLayout.PREFERRED_SIZE)
                .addContainerGap())
        jPanel3Layout.setVerticalGroup(
            jPanel3Layout.createParallelGroup(org.jdesktop.layout.GroupLayout.LEADING)
            .add(org.jdesktop.layout.GroupLayout.TRAILING, jPanel3Layout.createSequentialGroup()
                .addContainerGap()
                .add(jPanel3Layout.createParallelGroup(org.jdesktop.layout.GroupLayout.BASELINE)
                    .add(jButton2)
                    .add(jButton1))
                .addContainerGap())
        org.jdesktop.layout.GroupLayout appletPanelLayout = new org.jdesktop.layout.GroupLayout(appletPanel);
        appletPanel.setLayout(appletPanelLayout);
        appletPanelLayout.setHorizontalGroup(
            appletPanelLayout.createParallelGroup(org.jdesktop.layout.GroupLayout.LEADING)
            .add(org.jdesktop.layout.GroupLayout.TRAILING, appletPanelLayout.createSequentialGroup()
                .addContainerGap()
                .add(appletPanelLayout.createParallelGroup(org.jdesktop.layout.GroupLayout.TRAILING)
                    .add(org.jdesktop.layout.GroupLayout.LEADING, jPanel2, org.jdesktop.layout.GroupLayout.DEFAULT_SIZE, org.jdesktop.layout.GroupLayout.DEFAULT_SIZE, Short.MAX_VALUE)
                    .add(org.jdesktop.layout.GroupLayout.LEADING, jPanel1, org.jdesktop.layout.GroupLayout.DEFAULT_SIZE, org.jdesktop.layout.GroupLayout.DEFAULT_SIZE, Short.MAX_VALUE)
                    .add(org.jdesktop.layout.GroupLayout.LEADING, jPanel3, org.jdesktop.layout.GroupLayout.DEFAULT_SIZE, org.jdesktop.layout.GroupLayout.DEFAULT_SIZE, Short.MAX_VALUE))
                .addContainerGap())
        appletPanelLayout.setVerticalGroup(
            appletPanelLayout.createParallelGroup(org.jdesktop.layout.GroupLayout.LEADING)
            .add(org.jdesktop.layout.GroupLayout.TRAILING, appletPanelLayout.createSequentialGroup()
                .addContainerGap()
                .add(jPanel1, org.jdesktop.layout.GroupLayout.PREFERRED_SIZE, org.jdesktop.layout.GroupLayout.DEFAULT_SIZE, org.jdesktop.layout.GroupLayout.PREFERRED_SIZE)
                .addPreferredGap(org.jdesktop.layout.LayoutStyle.RELATED)
                .add(jPanel2, org.jdesktop.layout.GroupLayout.DEFAULT_SIZE, org.jdesktop.layout.GroupLayout.DEFAULT_SIZE, Short.MAX_VALUE)
                .addPreferredGap(org.jdesktop.layout.LayoutStyle.RELATED)
                .add(jPanel3, org.jdesktop.layout.GroupLayout.PREFERRED_SIZE, org.jdesktop.layout.GroupLayout.DEFAULT_SIZE, org.jdesktop.layout.GroupLayout.PREFERRED_SIZE)
                .addContainerGap())
        add(appletPanel, java.awt.BorderLayout.CENTER);
    }// </editor-fold>
    private void jButton2ActionPerformed(java.awt.event.ActionEvent evt) {
        this.destroy();
    private void jButton1ActionPerformed(java.awt.event.ActionEvent evt) {
        changeForms(this.paso);
    // Declaraci�n de variables - no modificar
    private javax.swing.JPanel appletPanel;
    private javax.swing.JButton jButton1;
    private javax.swing.JButton jButton2;
    private javax.swing.JPanel jPanel1;
    private javax.swing.JPanel jPanel2;
    private javax.swing.JPanel jPanel3;
    private javax.swing.JLabel jTextField1;
    private javax.swing.JLabel label;
    // Fin de declaraci�n de variables
     * M�todo readParameters
     * M�todo que inicializa los valores de los par�metros internos, recibidos por par�metro.
    private void readParameters() throws FileNotFoundException, IOException {
         ???????????????? deleted for the forum
        addSecurityProviders();
     * M�tode loadFirstForm
     * Aquest m�tode carrega a jPanel2 el formulari que informa sobre la c�rrega dels arxius
    private void loadFirstForm(){
        //Form1 f1 = new Form1(stream, i + 1, fileURL.size(), sender.returnCurrentContentLength(), appletBackground);
        //Form1 f1 = new Form1(fileURL.size(), sender.returnCurrentContentLength());
        Form1 f1 = new Form1();
        //Lo dimensionamos y posicionamos
        f1.setSize(310, 150);
        f1.setLocation(10, 110);
        //A�adimos el formulario al JPanel que lo contendr�
        this.jPanel2.add(f1);
        //Validem i repintem el JPanel
        jPanel2.validate();
        jPanel2.repaint();
        //Descarreguem l'arxiu a signar
        *System.out.println("FormularioApplet Dentro de loadFirstForm(), antes de llamar a getDownloadFile()");*
        *byte obj[] = f1.getDownloadedFile(this.documentToSign);*
        if (obj == null){
            System.out.println("Lo que devuelve f1.getDownloadedFile(this.documentToSign) es NULL");
        else{
            System.out.println("Lo que devuelve f1.getDownloadedFile(this.documentToSign) NO es NULL");
            System.out.println("obj: " + obj.length);
        this.ftbsigned.add(obj);
        System.out.println("FormularioApplet Dentro de loadFirstForm(), despu�s de llamar a getDownloadFile()");
        //Indicamos que el primer paso ya se ha efectuado
        this.paso++;
     * M�tode changeForms
     * Aquest m�tode carrega a jPanel2 un formulari concret segons el valor de la variable global "paso"
    private void changeForms(int paso){
        /*A cada paso se cargar� en el JPanel y formulario diferente
         * Paso previo: Se realiza en la inicializaci�n, carga el formulario, descarga el archivo y muestra la barra de carga.
         * Case 1: Se carga el formulario de selecci�n de tipo de firma.
         * Case 2: Se carga el formulario de datos de la persona que firma.
        this.paso = paso;
        switch(paso){
            case 1:
                //Creamos un objeto de formulario (seleccion de tipo de firma)
                Form2 f2 = new Form2();
                //Lo dimensionamos y posicionamos
                f2.setSize(310, 185);
                f2.setLocation(10, 110);
                //Quitamos el formulario 1 y a�adimos el formulario 2 al JPanel
                this.jPanel2.remove(1);
                this.jPanel2.add(f2);
                //Validem i repintem el JPanel
                jPanel2.validate();
                jPanel2.repaint();
                //Modificamos el contador de pasos.
                this.paso++;
                break;
            case 2:
                //Creamos un objeto de formulario (seleccion de tipo de firma)
                Form3 f3 = new Form3();
                //Lo dimensionamos y posicionamos
                f3.setSize(310, 175);
                f3.setLocation(15, 130);
                //Quitamos el formulario 1 y a�adimos el formulario 3 al JPanel
                this.jPanel2.remove(1);
                this.jPanel2.add(f3);
                //Validem i repintem el JPanel
                jPanel2.validate();
                jPanel2.repaint();
                //Modificamos el texto del bot�n y el contador de pasos.
                this.jButton1.setText("Finalizar");
                this.paso++;
                break;
            default:
                //Finalizar el Applet
                //C�digo que se encargue de guardar el archivo en el disco duro del usuario
                break;
    private void addSecurityProviders() throws FileNotFoundException, IOException {
        Security.addProvider(new CryptoAPIProvider());
        if (signatureType == SIGNATURE_PDF) {
            Security.addProvider(new BouncyCastleProvider());
        else {
            Security.addProvider(new Sun());
    private File createOutputFile(String filename, int index) {
        return new File((String)outputFilename.get(index));
    protected Object javascript(String function, String args[]) throws RuntimeException {
        //Remove
        if (true) return null;
        try {
            Vector<String> list = new Vector<String>();
            if(args != null) {
                for(int i = 0; i < args.length; i++) {
                    list.addElement(args);
if(list.size() > 0) {
Object objs[] = new Object[list.size()];
list.copyInto(objs);
return JSObject.getWindow(this).call(function, objs);
} catch(UnsatisfiedLinkError e) {
e.printStackTrace();
throw new RuntimeException((new StringBuilder()).append(e).append("\nFunci�: ").append(function).toString());
} catch(Throwable e) {
e.printStackTrace();
throw new RuntimeException((new StringBuilder()).append(e).append("\nFunci�: ").append(function).toString());
return JSObject.getWindow(this).call(function, new Object[0]);
Edited by: Kefalegereta on Oct 31, 2007 3:54 AM
Edited by: Kefalegereta on Oct 31, 2007 4:00 AM

Look at iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
iPad: Issues connecting to Wi-Fi networks http://support.apple.com/kb/ts3304
iOS: Recommended settings for Wi-Fi routers and access points http://support.apple.com/kb/HT4199
Additional things to try.
Try this first. Turn Off your iPad. Then turn Off (disconnect power cord) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
Change the channel on your wireless router. Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
Another thing to try - Go into your router security settings and change from WEP to WPA with AES.
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
If none of the above suggestions work, look at this link.
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
Fix iPad Wifi Connection and Signal Issues http://www.youtube.com/watch?v=uwWtIG5jUxE
~~~~~~~~~~~~~~~
If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
 Cheers, Tom

With Galaxy and Blackberry bring out new tablets with adobe flash technology is apple going to introduce this feature into there new software???

With galaxy and blackberry tablets having adobe technology is apple going to introduce this feature to Ipad2 ?

No.
http://www.apple.com/hotnews/thoughts-on-flash/
http://www.geek.com/articles/apple/adobe-ceo-on-apples-ios-flash-ban-weve-moved- on-20100816/
Also,
Review: Samsung Galaxy Tab Is no iPad Killer
http://www.foxnews.com/scitech/2011/06/20/samsungs-new-galaxy-tab-is-still-no-ma tch-for-peerless-ipad2/
Very disappointing sales of BlackBerry smartphones and tablets during the last quarter led RIM to cut its full-year profit expectations by 30% Thursday. The Waterloo, Ontario-based company also announced that it will begin a program to "streamline operations," which will include layoffs.
http://money.cnn.com/2011/06/16/technology/rim_earnings_q1/index.htm

Disappointment With Fan And Screen _Quality_ On New ThinkPad T430

Happy New Year. I'm typing this as a means to blow off some steam and to warn anyone considering the purchase of a Lenovo product. Yesterday I unboxed a new ThinkPad T430 (2344BMU), my second. A year ago I purchased my first T430 (23445GU) and have been nothing but happy with it since, however, given the chance to upgrade the processor I took advantage. The first thing I noticed when I powered up the new laptop was that the fan sounds like a small turbine when it kicks in, with a distinct whirring sound as it winds up. This was a major surprise as the fan on my first T430 rarely ever caught my attention, and then only when really pushing the CPU. The second thing I noticed, as the two laptops sat side-by-side, was that the screen on the new T430, despite having the same 1600x900 resolution, was noticably less vibrant than the old laptop's screen, as if there's a fine coating of dust on it. Barely a half hour of research later I learned that Lenovo has multiple contracts for fan and screen production, with a distinct difference in quality among the manufacturers, and that it basically comes down to luck regarding screen and fan quality on any given computer sold by Lenovo. Call me picky, but when I spend $1500 on something I expect a certain level of quality. Here Lenovo has failed miserably. Given that my purchase wasn't directly with Lenovo but through a third party, it seems that I've no recourse other than to grind my teeth while using my "awesome" new T430. I'm actually typing this on the old laptop while updating the drivers and software on the new one, and it's taking a real effort to not smash the new laptop against the wall. The fan is that intrusive. Anyway, if even one person reads this and is saved the annoyance of my situation, then I can live with it. My suggestion would be to never order a Lenovo product online, but to instead find a means to purchase a computer that you've already taken for a test drive so that you know you'll be happy with it. Good luck.

Here is the fail: "...my purchase wasn't directly with Lenovo but through a third party"
Perhaps you should just bitch and moan over on their Forum.
W530 | 3840QM | 32g @ 1.35v CL9 1986z | 512g 840 Pro | 1t HGST 7200 | FHD AUO v.4 | Quadro K2k | GOBI 5k | Centrino 6300

LSMW - Problem with copied and edited Project - missing new field

I have copied an LSMW project to a new Project to load a Journal Entry to FI - Transaction Code FB01. I added a new field VALUT (value date) to both the Maintain Source Fields and Maintain Field Mapping Steps. The data with the new field shows up in Display Read Data, but it does not show up in Display Converted Data. This new field is the last field in the csv file, i added it to the end of the Source fields.
I think perhaps i need to create a new Batch Input Session, because when i run the Start Direct Input Program, one of the messages that comes up refers back to the original project name - not my renamed Project. --> "Session Name OLD PROJECT NAME was opened"
(The steps available on my screen do not include a "Create Batch Input Session" step, as some of the posted answers show)
Thank you for your help.

Hi Sandra, Thank you for your reply. I am not sure what you mean by restart. if you mean go through all the steps- yes, i went through all the steps again. I also exited out of the LSMW screen completely and went back in to my project and redid the read and convert data again, just to be sure, but i am still missing the new field in display converted data.
The only change i made to the Project was to change the name of the Project, subproject, and object and to add a field to the Source Fields and Field Mapping - for field mapping i used the default rule of Transfer(move)and my source and code seems to be correct - in that i followed the example of all the other fields. i also changed the name of the file where my new csv file was located, but i did not change the names of the read and converted data files. Perhaps i need to change something else? It seems to me that it is still using the instructions from the old project to convert the data. Thanks again.

Fxstruts and xml example needed

Hello,
I'm using fxstruts to bridge to a new flex app. I am using
secure http and am using the HTTPService request on the client. The
request goes through successfully (i.e. a logon). Once that
succeeds on the server I forward to a page which returns some very
basic user information (name, etc):
<%@ page language="java" contentType="text/html;
charset=ISO-8859-1"
pageEncoding="ISO-8859-1"
import="com.myCompany.actions.HomePageForm"%>
<%@ taglib uri="/WEB-INF/lib/fxstruts-0.2.jar" prefix="fx"
%>
<jsp:useBean id="userInfo"
class="com.myCompany.actions.HomePageForm"></jsp:useBean>
<fx:write name="userInfo" type="xml" />
From stepping via a debugger this fxstruts code is definitely
being hit. The appropriate attribute, "userInfo" is indeed in the
request attributes. I've modeled this example after the AMF
examples provided. However, the client always returns to the fault
handler on the client with the following error:
Error: [IOErrorEvent type="ioError" bubbles=false
cancelable=false eventPhase=2 text="Error #2032: Stream Error. URL:
https://localhost:9444/fieldsales/web/j_security_check"]. URL:
https://localhost:9444/fieldsales/web/j_security_check
As more detail regarding my environment, I'm running
FlexBuilder 3.0 standalone pointing to an IBM RAD 7.5 localhost
environment. Everything seems to go well: the logon, the forward to
the fxstruts jsp but the flex client always seems to get this
error. Thanks for any help.

I'm hoping I understand what you're doing... I would probably
do it all in one frame and just toggle the .visible property of the
subcategory list after the first one has been clicked, but there's
no rules about how you do it.
Without being sure, I think what you may have done is put a
second "copy" of the category list on another keyframe, which
replaces the previous instance. By taking away the second copy it
should work. If that's not the case, then I'm stumped... otherwise
read on.
So if you have the category list in its own layer, just have
it in frame one, on frame 2 of the same layer have a frame but
not a keyframe. This will mean the instance in frame one is
still the same one when the playhead gets to frame 2.
And have the subCategory list on a separate layer, it appears
on frame 2...
BTW the .getSelectedItem() method of the list reminds me of
flash mx... is that the version you're using (curiosity only I
don't think its relevant, because its obviously working).

CS3 with Bridge and DNG converter on new MacBook Pro and update recognition

I have CS 3 with Bridge. I installed it on my MAC desktop in 2008 and had to update the DNG converter to recognize my Nikon D700 raw files. I have a new MAC Book Pro and installed the software on it but it does not recognize the raw files, I downloaded the updated DNG converter but unlike the desktop it did not automatically update as I recalled it did in 2008. On the DNG Converter window the #1 selection is select image to convert, #2 Select location to save conver timages and #3 select name for converted images. Not sure what to do here, it all most leads me to believe i need to do this each time I download raw images?
Any step by step help is appreciated!

On the DNG Converter window the #1 selection is select image to convert, #2 Select location to save conver timages and #3 select name for converted images. Not sure what to do here, it all most leads me to believe i need to do this each time I download raw images?
Here is the link for the latest DNG converter:
http://www.adobe.com/support/downloads/detail.jsp?ftpID=5309
Some links are country specific, if it does not work for try a google search "Adobe DNG download" and you will get here also.
Follow the instructions from the read me section:
SYSTEM REQUIREMENTS
Mac OS X v.10.4-10.7
INSTALLATION INSTRUCTIONS
To open a DMG file:
Double-click the file. This will open Disk Copy, which mounts the image on your desktop.
To Install the DNG Converter:
1.     Quit the DNG Converter
2.     Open the download file and double-click Adobe DNG Converter.pkg and follow the on-screen instructions.
3.     The DNG Converter is now available in your Applications directory.

Problems with Yahoo and security on my new iMac

I just got my new iMac last weekend and I have had a Yahoo email account for years.
Now all of sudden last night, I got an email from Yahoo saying I was signed up for some Phone Out Service and there was an account set up in my user name. (so they must have gotten my user name and password somehow)
It looks like a Japanese name and some other credit card number on my account. How does this happen? Should I be worried? Has anyone else had this happen to them?
The billing dept. got back to me and took all that Phone Out stuff off my account, but they didn't say how it got there in the first place! I'm really concerned about this. I think I'll close out my whole Yahoo account. (I have changed my password, etc.)
Has anything like this happened to anyone else? I'm just really concerned about how this happened, someone must have gotten into my account somehow (with my user name and password), makes me worry they could get into something else more important. Is there anything I can do to prevent this?
I was told I didn't need antivirus or internet protection, etc. I just turned on my firewall the other day and did log into my email a couple times before I turned it on. But maybe my info was stolen somewhere else (I have logged in my email on public computers).
Any advice anyone? Is my iMac safe? Should I get some kind of internet protection? I'm still waiting to hear more from Yahoo as to how this happened.
Thanks so much.

traces7 wrote:
I'm just nervous that they somehow got into my new iMac and still can. Is there more I should do to protect it?
Thanks again!
Are you on high speed internet behind a hardware firewall such as a router? Or are you on a dial up modem?
If you are high speed and don't have a router I'd highly recommend you purchase one. They are not very expensive. If you do have a router its unlikely they got into your computer and more likely someone got the information from a public source. A router protects you by only allowing in solicited data from the site you are visiting and blocks uncalled for probes. If you are on dial-up its a good idea to turn on the software firewall.
It's very easy for someone to go to a public computer, install a small piece of monitoring software from a usb memory stick, remove the stick and then leave the program running for a period of time collecting user names and passwords. After a week or so the thief returns to the computer, re-inserts his usb stick, downloads the collected information to the stick and leaves with the data.
Other ways they can get information is from public wifi spots such as cafes or hotel rooms. All someone has to do is join the network, and from their own computer monitor the internet traffic on the unsecured connection and collect data.
Unless you store your passwords on the computer there's nothing there for anyone to get into. If they tried to install a piece of software you would have had to have given permission to install it just like any other piece of software. But if you do think your computer has been compromised the only sure way to know it's safe again would be to re-format the hard drive and re-install your OS and data.
Message was edited by: pogster

IPhone 5s and iTunes Help Needed - NEW PC

Hi, I got the iPhone 5s back in October (1st ever Apple product) and transfered my music and photos onto it via iTunes.
What I need help with is as my laptop is in for repair (complete system restore) can I download iTunes on mums laptop and put a few songs and pics on my iPhone WITHOUT clearing the curent files and leaving me without nothing on it.
Thanks
James

Use these instructions to open the library from its location on the external hard drive...
How to open an alternate iTunes Library file or create a new one
http://docs.info.apple.com/article.html?artnum=304447
This assumes that everything needed for an iTunes library is on the external hard drive which includes the data base files that contain the info you are concerned about (playlists, counts, ratings, etc.).
Patrick

Problems with iPad and iPhone... new appointments in grey color after creating on my book...

I have some problems with Calendar application on my iPhone and iPad under iOS 6 with Microsoft Exchange 2010 accounts
When I create new appointment on my MacBook in iCal or in Outlook when new appointment have one or more recipients then after synchronization on my mobile devices I see new appointment in grey color but not in color of my calendar... color changes to right color only after saving some changes to appointment on mobile device but only on this device

but you should have a backup in itunes.
Every time you sync your iOS device iTunes creates a backup. go check if its there, iTunes Preferences >Devices. and there you should see if you have a backup, and in case from which date the backup is.
And ofcourse you can get your icloud data back by just logging in with your Appleid under icloud in settings on the iphone.
But anyway, if the iPhone works when you restor it as new: try adding your backup, and see if the issue comes back. And experiment with your backup and try to work out what is causing the issue, my guess is that its some app! Good Luck!

Trouble with customer-cmp-ear example for new sun application server 9.0

recently, i have been playing with sun Java system application server 9.0 and try a couple of examples, but i was in trouble. for example, i try customer-cmp-ear example, and i can create db, but i can not Set up JDBC resources, and i always get the following error:
CLI146 /path/to/passwordfile does not exist in the file system or read permission denied.
i take a look at the description of the example, one thing i do not quite understand, at the common instruction, i am required to set javaee.server.passwordfile property, does it mean i have to create a passwordfile? where do I put it ? i hope someone can help me, i will really appreciate it.
Message was edited by:
junjun

I solved it.
Change the file"build.properties.sample" to
"build.properties"
Maybe it's a bug in J2ee TutorialThe instructions in the About chapter tell you to copy build.properties.sample to build.propertieshttp://java.sun.com/javaee/5/docs/tutorial/doc/?wp405013&About.html#wp87965
-Ian

Problems with apps and photos since updated new iTunes

Hi all.
I updated itunes and instaleed it on both my computer and my iphone. Since then, I cannot purchase apps, update them or sync them with my mac. My id and password are ok, but the apps are stuck in mid process and I cannot use them. If that wasn't enough, the iphone shows that all my photos are gone although itune shows 11.5 gb of "other" and I can't sync photos from iphoto to iphone. ideas anyone?

Do not install MacKeeper.
Back up your Mac if you have not already done so. To learn how to use Time Machine read Mac Basics: Time Machine backs up your Mac - Apple Support.
Determine if the same problems also occur in "Safe Mode":
Safe Mode or "Safe Boot" is a troubleshooting mode that bypasses all third party system extensions and loads only required system components. Read about it: Starting up in Safe Mode
You must disable FileVault before you can start your Mac in Safe Mode.
Starting your Mac in Safe Mode will take longer than usual, graphics will not render smoothly, audio is disabled on some Macs, and some programs (iTunes for example) may not work at all.
Merely starting your Mac in Safe Mode is not intended to resolve the problem, it's to observe its performance without certain additional components.
To end Safe Mode restart your Mac normally. Shutdown will take longer as well.

I'm having a big issue with scripts and sites I need.

I am an Etsy shop owner and always been able to access my shop just fine all the sudden about three weeks ago I cannot log in to my shop on ff. I can view the Etsy site but when I try to log in it just loads and loads and will not let me. I know it is the script bc I added a script turn off add on and I could log on but Etsy will not let you have it turned off to edit items if your shop so I had to download chrome just to go to my shop which is annoying, I do not like chrome.
Other than that a few more sites like creative market and a few blogs will not load anymore for me. I have already re-set and that did not work. Also I get a lot of script not responding plugin popups that freeze and crash. This is really annoying. Does anyone know a fix? Thanks..

You can try basic steps like these in case of issues with web pages:
Reload web page(s) and bypass the cache to refresh possibly outdated or corrupted files.
*Hold down the Shift key and left-click the Reload button
*Press "Ctrl + F5" or press "Ctrl + Shift + R" (Windows,Linux)
*Press "Command + Shift + R" (Mac)
Clear the cache and only cookies from websites that cause problems.
"Clear the Cache":
*Firefox/Tools > Options > Advanced > Network > Cached Web Content: "Clear Now"
"Remove Cookies" from sites causing problems:
*Firefox/Tools > Options > Privacy > Cookies: "Show Cookies"
Start Firefox in <u>[[Safe Mode|Safe Mode]]</u> to check if one of the extensions (Firefox/Firefox/Tools > Add-ons > Extensions) or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox/Firefox/Tools > Add-ons > Appearance).
*Do NOT click the Reset button on the Safe Mode start window.
*https://support.mozilla.org/kb/Safe+Mode
*https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes

Ok my iPod has a lot of music i no longer want on it and the computer my iPod was synced with died and i have a new (used) computer now and want to take off some of the music i have i cloud please help

ok my iPod has a lot of music i no longer want on it and the computer it was synced to died i have iCloud ineed to sync it to this computer now and talke off the music i no longer want on it help

Do this:
Syncing to a "New" Computer or replacing a "crashed" Hard Drive: Apple Support Communities

TestStand with perl and Tcl examples need newer dlls

Similar Messages

Maybe you are looking for