Text field in DDIC

Hi frnds,
I have created a DDIC table. It has a field of type LCHR of length 800. there is also a preceding INT2 field for this field. But i'm not able to maintain this field directly from a table control or the DDIC directly. How do i do it ? .i.e how do i enter the values for this field..
points assure to all replies*********
Regards,
Madan..

Hi,
I think we can enter this LCHR OR FLTP data type field values only by programatically.
You can not enter by SM30.
Even we can not create a input text field on custom screen more than 132 character length.
Regards,
Krishnamurthy.SC

Similar Messages

Setting the colour red for an input field or a text-field in a table

Hy,
I am using an input-field or text-field within a table-cell. For some rows in the table the text in the input-field / text-field should be red. How can I do this ?
Florian Hroch

Create a new attribute "TextColor" of type "com.sap.ide.webdynpro.uielementdefinitions.TextViewSemanticColor" (local DDIC types), under the table's data source node.
Bind the "TextView.semanticColor" property of the table cell editor to this attribute.
If you cannot add new attributes under the data source node (this is the case if there is a structure binding), add a value node "TableProperties" (cardinality 1:1, selection 1:1) under the data source node and add the attribute there.
Then you can control the color of the TextView in table row at index i by setting the "TextColor" value for node element at index i.
For an input field, you cannot set the text color, a workaround might be adding an icon in an extra column.
Armin

How to provide text formatting options to user from a text field

Hi,
My requirement is - in the interactive form, a comments field needs to be provided where user should be able to enter text with formatting options like
Headers
indentations
bold/italic
bullet points and numbers
Once user enters the formatted texts in a text field, data needs to be displayed/printed in the same format. Could you help me on how to provide these formatting options to the user for a particular text field?
I understand that once I define the text field with format XHTML (with RTF), user formatting can be captured and displayed in the same way. But I am not sure on how to provide the formatting options for the text field.
Thank you,
Madhu

Hi,
if you select a text field for Rich Text and the press Ctrl + E you'll get a bar for all available text formatting options in Acrobat/Reader.

Wrap a single word in a text field

Hello everyone!
I currently have a problem with text data that is displayed in a Flex text field <mx:Text>.
It's a narrow textfield (100px wide) in a animated ad banner that displays content from a database. There are some words that are too long for the available space, so flash wraps some letters to the next line. I have attached a screenshot that shows the actual problem.
The text is shown in a Java web-application as well, and since that Java app is displayed as a normale webpage, there is a lot more space for the text. I cannot put hyphens into the text because it would look weird in the normal web view.
Is there a way to make automatic hyphenation happening when Flash wraps a single word?
It would be perfect to get language-specific correct hyphenation, but a hyphen at the wrong spot is still better than no hyphen at all.
Thanks for your time and help!

I think your simplest bet would be to use mx:label and use the op
tion truncateToFit="true". Also adjust the width so that the text appears prope
rly. Hope this helps..!!

Sales order CARRIER TEXT field

Hi,
I am creating query through SQVI, I would like to use sales order carrier text field with the query.please advice which table and field should I use for query ?
Thanks in advance

Sorry, by mistake I posted the message again.
Pls ignore it.
Hi JK,
Where are u entering the sales order carrier data. Is it Header Data or Item Data. Is it a long text?
Please give more details.
Regards,
Vinod

Change the font color of a text field in a table by key-combination

I want to change the font color of a text field in a table (single cell only) on pressing a key combination. Does anybody know how to do this.
I have a lot of data in a table. During an evaluation of the data in a meeting I want to change the color of the text depending on the result of the meeting. (for example: High risk = CTRL+R makes the text red).
I know how to change the color using a button, but I do not want to add a button after each cell. For this reason I would like to do it on a key combination that alway refers to the active cell.
Many thanks for your help in advance.
Marcel

Hi,
I don't think you can use the ctrl key like that as those shortcuts will be intercepted by Reader (ctrl-R toggles the ruler display on / off). You also might have trouble updating the color while you still have focus on it. You can use the shift key in a similar way, so if you only have lower case characters in the text fields then you can do something like;
if (xfa.event.shift)
    switch (xfa.event.change)
        case "R":
            this.fontColor = "255,0,0";
            break;
        case "O":
            this.fontColor = "255,102,0";
            break;
        case "G":
            this.fontColor = "0,255,0";
            break;
    xfa.event.change = ""; // ignore character
If you need uppercase characters maybe you can have one button to set "review mode" and test that on the if (xfa.event.shift) line. But again it wont take effect until you have tabbed out of the field.
Regards
Bruce

Repeat Text Field Value on Master page

This might be a really simple question. I have a form with two master pages. The second is applied to all but the first page. On the second master page I have a text field that I populate with user entered data from a text field. I want this value to show on all pages after the first page (page 2 to n). It shows up with the value on page 2, but all the rest have a blank value. Do I need to script something to make it repeat for all pages? Any help would be appreciated.

The simpliest method would be:
Under the Object tab, select Binding, and change the Default Binding to Global. The TextFields you create must have the same name, and Global binding will populate all the fields.

Unable to clear text Field in Multi Screen JFrame GUI Application

i am working with a Swing GUI project where I want to accept user input in a
text field
I have used singleton pattern which will create only one instance of object
due to this when i move from one scree to another the input of textfield
doesnt updated I have used setText method to clear the JTextField but it wont
works
Program one -- 1st screen
import java.awt.event.ActionEvent;
import java.awt.event.ActionListener;
import javax.swing.JButton;
import javax.swing.JFrame;
import javax.swing.JPanel;
import javax.swing.SwingUtilities;
import java.awt.event.*;
import javax.swing.JTextField;
public class Frame1 extends JFrame
public static Frame1 frame1;
public JButton button;
public JTextField input;
public static Frame1 getInstance()
if(frame1==null)
frame1 = new Frame1();
return frame1;
public JButton getJButton(String mytext)
JButton button = new JButton();
button.setText(mytext);
button.setBounds(450,450,150,50);
return button;
public void myGUI()
JPanel panel = new JPanel();
panel.setLayout(null);
button = getJButton("1st Frame");
addActionListener(button);
input = new JTextField(10);
input.setBounds(200,300,100,30);
panel.add(input);
panel.add(button);
add(panel);
setUndecorated(true);
setSize(1024, 768);
setVisible(true);
setDefaultCloseOperation(EXIT_ON_CLOSE);
public void addActionListener(Object obj)
try{
JButton button1 = (JButton)obj;
button.addActionListener(new ActionListener() {
public void actionPerformed(ActionEvent ae)
String text = "";
input.insert("", 0);
Frame2.getInstance().myGUI();
Frame2.getInstance().repaint();
dispose();
catch(Exception e1)
System.out.println("Exception==> "+e1.toString());
public static void main(String[] args)
Frame1.getInstance().myGUI();
Frame1.getInstance().repaint();
program 2 - 2nd screen
import javax.swing.JFrame;
import javax.swing.JPanel;
import java.awt.event.ActionEvent;
import java.awt.event.ActionListener;
import javax.swing.JButton;
import javax.swing.JFrame;
import javax.swing.JPanel;
import javax.swing.SwingUtilities;
import java.awt.event.*;
import javax.swing.JTextField;
public class Frame2 extends JFrame
static Frame2 frame2;
public JButton BackButton;
public JTextField input;
public static Frame2 getInstance()
if(frame2==null)
frame2 = new Frame2();
return frame2;
public JButton getJButton(String mytext)
JButton button = new JButton();
button.setText(mytext);
button.setBounds(450,450,150,50);
return button;
public void addActionListener(Object obj)
try{
JButton BackButton1 = (JButton)obj;
BackButton.addActionListener(new ActionListener()
public void actionPerformed(ActionEvent ae)
input.setText("");
Frame1.getInstance().myGUI();
Frame1.getInstance().repaint();
dispose();
catch(Exception e2)
System.out.println("Exception==> "+e2.toString());
public void myGUI()
JPanel panel2 = new JPanel();
panel2.setLayout(null);
BackButton = getJButton("2nd Screen");
addActionListener(BackButton);
input = new JTextField(10);
input.setBounds(200,300,100,30);
panel2.add(input);
panel2.add(BackButton);
add(panel2);
setUndecorated(true);
setSize(1024, 768);
setVisible(true);
setDefaultCloseOperation(EXIT_ON_CLOSE);
In this application the status of TextField input remain same means it shows
the earlier input in the textfield wnen I come to earlier or next screen.
what is the solution to clear the TextField input while moving from 1st
scrren to 2nd screen.

multiple screens = multiple posts
well done indeed - just another farking cross-poster
[http://www.coderanch.com/t/492998/Swing-AWT-SWT-JFace/java/unable-clear-text-box-Multi#2218566]

How do you grey out a radio button if a text field is blank in Adobe Acrobat XI Pro?

How do you grey out a radio button if a text field is blank in Adobe Acrobat XI Pro?
So this what I'm trying to do:
(     )   |TEXT FIELD|
(     )   |TEXT FIELD|
(     )   |                  |
(     )   |TEXT FIELD|
I have a radio button: (     )
and a text field: |TEXT FIELD|
The third text field is blank, and I would like for the radio button next to it greyed out (user can't click on it) since the text field is blank. Is this possible to achieve? I'm assuming I'll have to use javascript, but what would the code be and would it be entered in the javascript editor for the text field or the radio button?
Thanks in advance guys

Hey, thanks, but it didn't work
I have the text fields as read only. Could that be why it's not working? Should I make the fields not read only?
Thanks,

How to find the number of occurance of a string in text field of Infopath form?

Hi All,
In Infopath text field, How to find the number of occurrence of a particular string in that field?
Thanks in advance!

You can check to see if it contains a string once by using the contains function, but there isn't a very clean way to do what you want. If you wanted to guess at the maximum number of occurrences, then you could:
Box A has your initial. Set Box B to do a concat of string-before and string-after of Box A where it copies Box A minus the string we're looking for. Then we have Box C that does the same thing to Box B. Repeat as many times as you see necessary.
Example:
String: "1"
Box A - "123451234512345"
Box B - "23451234512345"
Box C - "2345234512345"
Box D - "234523452345"
etc.
We then have a field that has nested ifs looking backwards from Z -> A looking for a non-blank. Based on that, we return the number of occurrences. Again, this isn't clean, but it will work if you think there's a predefinable maximum.
Andy Wessendorf SharePoint Developer II | Rackspace [email protected]

Adding user-defined number of text fields.

Okay I am having problems, obviously. I am developing a program where the user will enter X and Y values and the program will calculate the relational data. However, I can't even get a start.
First of all, the user defines the number of pairs of points they want to define. For example, they have 20 points, each with its own X and Y, so they click on 20 and then okay in the first window.
The next window will then take their answer and display X and Y text fields for as many points as they defined. However, I can't figure out any way to do this.
Feel free to run the program, the problem lies in the method setTextFields(). Help please!
import javax.swing.*;               //FOR SWING COMPONENT CLASSES
import java.awt.*;                  //FOR CONTAINER CLASS
import java.awt.event.*;            //FOR EVENT HANDLING
public class RegressInput extends JFrame
    private JComboBox listJComboBox;        //COMBO BOX TO HOLD HOW MANY PAIRS OF DATA POINTS THE USER HAS TO ENTER
    private JButton answerButton;           //BUTTON TO CLICK AFTER SELECTING PAIRS OF DATA POINTS
    private JPanel textFieldTopPanel;       //TEXT FIELD TOP PANEL
    private JPanel textFieldBottomPanel;    //TEXT FIELD BOTTOM PANEL
    private JPanel textFieldPanel;           //TEXT FIELD PANEL
    private CardLayout cardSelector;        //DECLARE CARD LAYOUT OBJECT
    private JPanel cardDeck;                //DECLARE CARD PANEL OBJECT
    public RegressInput(String title)
        super(title);               //CALL SUPERCLASS CONSTRUCTOR
        //CREATE A CONTAINER
        Container container = getContentPane();
        //INSTANTIATE CARD LAYOUT OBJECT
        cardSelector = new CardLayout();
        //INSTANTIATE PANEL OBJECT
        cardDeck = new JPanel();
        //SET LAYOUT OF CARD DECK PANEL TO CARD LAYOUT
        cardDeck.setLayout(cardSelector);
        //DEFINE LABEL FOR FIRST CARD
        Label question = new Label("How many PAIRS of data would you like to enter?");
        //BUTTON TO SUBMIT NUMBER OF POINTS TO PLOT
        answerButton = new JButton("OK");
        listJComboBox = new JComboBox( getArray() );//USE getArray() METHOD TO SET ITEM LIST OF THE COMBO BOX
        listJComboBox.setMaximumRowCount(10);       //SETS THE VISIBLE NUMBER OF ITEMS TO THE USER
        Label xValues = new Label("X Values");      //LABEL FOR X values
        Label yValues = new Label("Y Values");      //LABEL FOR Y values
        //BUILD CARD DECK
        JPanel comboBoxCard = new JPanel();     //CREATE FIRST CARD
        comboBoxCard.add(question);             //ADD question LABEL TO FIRST CARD
        comboBoxCard.add(listJComboBox);        //ADD listJComboBox TO FIRST CARD
        comboBoxCard.add(answerButton);         //ADD answerButton TO FIRST CARD
        textFieldTopPanel = new JPanel();       //CREATE TOP PANEL OF SECOND CARD
        textFieldTopPanel.add(xValues);         //ADD xValues Label TO SECOND CARD
        textFieldTopPanel.add(yValues);         //ADD yValues Label TO SECOND CARD
        textFieldBottomPanel = new JPanel();    //CREATE BOTTOM PANEL OF SECOND CARD
        textFieldBottomPanel.setLayout(new FlowLayout(FlowLayout.CENTER,10,10));    //SET LAYOUT FOR BOTTOM PANEL
        textFieldPanel = new JPanel();          //CREATE PANEL FOR SECOND CARD
        textFieldPanel.setLayout(new BorderLayout(10, 10)); //SET LAYOUT FOR SECOND CARD
        textFieldPanel.add(textFieldTopPanel, "North"); //ADD textFieldTopPanel TO NORTH
        textFieldPanel.add(textFieldBottomPanel, "South"); //ADD textFieldBottomPanel TO SOUTH
        cardDeck.add(comboBoxCard, "Step 1");       //ADD FIRST CARD TO DECK
        cardDeck.add(textFieldPanel, "Step 2");     //ADD SECOND CARD TO DECK
        container.add(cardDeck);                    //ADD CARD DECK TO CONTAINER
        //DEFINE BUTTON HANDLER OBJECT
        ButtonHandler buttonHandler = new ButtonHandler();
        //ADD ACTION LISTENER FOR BUTTONS
        answerButton.addActionListener(new ButtonHandler());
    }//END RegressInput() CONSTRUCTOR
    //METHOD TO CREATE AND RETURN AN ARRAY OF VALUES FOR JComboBox
    private String[] getArray()
        //CREATE ARRAY TO HOLD 30 VALUES
        int numbers[] = new int[29];
        //CREATE int IN ORDER TO START THE ARRAY AT 2 INSTEAD OF 1
        int number = 2;
        //ASSIGN VALUES FROM 2 TO 30 TO numbers[] ARRAY
        for(int count=0; count < 29; ++count)
            numbers[count] = number;        //SETS EACH INDEX TO number
            number++;                       //INCREMENTS number
        }//END for LOOP
        //CREATE pairs[] ARRAY TO HOLD 30 STRINGS
        String pairs[] = new String[29];
        //ASSIGN VALUES 1 TO 30 IN STRING ARRAY FOR COMBO BOX
        for(int count = 0; count < 29; ++count)
            pairs[count] = "" + numbers[count];
        }//END for LOOP
        return pairs;//RETURNS pairs[] ARRAY FOR THE LIST ITEMS IN listJComboBox
    }//END getArray() METHOD8
    //RETURNS THE ITEM SELECTED BY THE USER FROM THE JComboBox
    private int getValue()
        //ASSIGNS STRING VALUE OF THE JComboBox TO A WRAPPER
        Integer v = new Integer((String) listJComboBox.getSelectedItem());
        //ASSIGNS WRAPPER VALUE TO int
        int value = v.intValue();
        //RETURN VALUE OF SELECTED ITEM
        return value;
    }//END getValue()
    private void setTextFields()
    {//HERE LIES THE PROBLEM! WHAT GOES IN THIS METHOD????
        for(int count = 0; count < (2 * getValue()); ++count)
    }//END setTextFields()
    //BUTTON EVENT HANDLER CLASS
    private class ButtonHandler implements ActionListener
     //PROCESS EVENT
        public void actionPerformed(ActionEvent e)
            //WHICH BUTTON CAUSED THE EVENT?
            if(e.getSource() == answerButton)
                cardSelector.last(cardDeck);
                cardDeck.setSize(600,600);
            }//END if STATEMENT
        }//END actionPerformed()
    }//END ButtonHandler CLASS
}//END RegressInput CLASSHere is main:
import javax.swing.JFrame;
public class TestSharpStats
     public static void main(String[] args)
        //DEFINE FRAME OBJECT
        RegressInput window = new RegressInput("Hi");     //SETS TITLE BAR
        window.setDefaultCloseOperation(JFrame.EXIT_ON_CLOSE);      //CLOSES WINDOW
        window.setSize(400, 600);    //SET FRAME SIZE
        window.setResizable(true); //PREVENTS USER FROM RESIZING WINDOW
        window.setVisible(true);     //SETS window TO VISIBLE
    }//END main()
}//END TestSharpStats CLASS

muit-post: http://forum.java.sun.com/thread.jspa?messageID=4442652

How to store text field data from web dynpro application in pcd ?

Hi Forum,
I am new to web Dynpro.
I want to store user specific data (a text field value) from a wd application in PCD and access it every time the user runs the application.How can I achieve this?
Thanks,
Mickey.

Hi
I created the "read" and "update" methods in my application service. How can I call them? I created and implemented the methods just like here: https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/340fc0ea-0c01-0010-74bf-965b11031e77
Operations:
- readMyEntityService:
- updateMyEntityService
Implementation:
retValue = getMyEntityService().read(key);
getMyEntityService().update(dS0);
In Web Dynpro there is this update method with the code above (in my original post).
How can I call the update-method????????
Kind regards
Bettina

Trying to use web app text field to redirect a page.

I am trying to create a web app, that will provide 'members' with a page that they can use to redirect to other pages of their choice. What I want to do is allow the member user to select (from a dropdown menu, or even input their own into a text field) a specific url (i.e. http://www.facebook.com/myfacebookpage) on their customer page. Once they select the url they want, and save their info, that url will be used in a redirect page, (i.e. <meta HTTP-EQUIV="REFRESH" content="0; url={tag_redirectURL}"> or something to that effect. Has anyone done this or have any ideas how to do it? Ultimately, I want the user to be able to change on the fly where someone goes when they share their user link with a friend (i.e. http://www.mywebsite.com/userpage/ will take someone to a facebook page or to a youtube video, or some other page they redirect to) so they can switch it on their own when they choose to.

Hi Scott,
You could create a web app which as a text (string) field in it for customers to enter the URL they want to redirect the customers to. Then place a JavaScript redirect inside the detailed layout, which would look like this:
<script type="text/javascript">

</script>
Give them access to secure zone, place a web app item creation form onto it and you're good to go.
Cheers,
mario

Displaying the value of text field A in text field B

I have a PDF form with 2 layers. Layer 1 has information, a textfield, and a button. Layer 2 is a certificate design. The user inputs their name in to a textfield called NameEntry.
When they hit the button, layer 1 disappears -- the instructions and NameEntry box become hidden. Layer 2 is the certificate design and I need a new textfield (which is called NameDisplay) to be populated from inputted information in text field NameEntry.
The simple answer, I know, is to name both text fields the same. This does not work for me as I need the input textfield to be styled differently (background and border) due to decisions out of my control vs the NameDisplay which will have no background and no border.
Any ideas? Thanks!

Use this custom calculation script:
event.value = this.getField("NameEntry").valueAsString;

Validation for text field: Null and contains no spaces

Currently on APEX 3.2
I want to check 1 text field and 2 text areas to ensure they are not null and blank (hitting the space bar in the field) before submitting the page. How do I do both validations for on each field?

I created a validation with a type of 'Function Returning Boolean' and using the following code in the expression:
IF( TRIM( :P1_Text_Field) IS NULL
Or LTRIM( :P1_Text_Field ) != :P1_Text_Field )
THEN
RETURN false;
ELSE
RETURN true;
END IF;
Edited by: Jeremy_F on Apr 12, 2012 8:15 AM

Text field in DDIC

Similar Messages

Maybe you are looking for