Text file transfer ?

My iPhone isnt jailbroken.
I have developed an application, in which I am writing some data into a text file.
Is it possible for me to sync/transfer my text file onto my mac machine ?
Can I use mobileme to transfer this particular text file to my mac ?
Or the way I can think to transfer this text file from iPhone to my machine is that
I bring in a webserver. I will send the data in this file to a server and then my mac can connect to this server to transfer this file .....
Please someone who has already worked on this problem let me know of his views.
Thank you soo much !

I would wait for SDK 3.0 release (push) and then use the dock connector or BT (my choice) instead.
Of course, there is also the horse/buggy method of emailing it to yourself on the target Mac

Similar Messages

Transfer time stamp from text file into MS Access thru Labview

Hello everyone,
I am Cruz; Long time listener, First time caller.
I am currently monotoring data being collected by an oven. The data is stored in a text file. I am using Labview to take the data from the textfile and place it in an MS access DB for manipulation. The first three columns of the text file are the time stamp of data. When i transfer the data into Access i cant get the first three columns to display as a time stamp. Can have some pointers on what how to get the first three columns to display correctly.
Additional info:
the text file is a 1D array that gets overitten with every new mesurement tanken. the transfer to Acces is to not loos any of the information and to better manipulate the data into forms and such.
Running Labview 2010
attached is code and text file.
Any help is greatly appreciated.
Attachments:
Oven test other.vi ‏16 KB
datalog032010003.txt ‏1 KB

Your first mistake is reading the file as DBL. Your first three columns are obviously not numeric values. Did you ever look at the output array? Read it as strings. Second, you would need to combine those first three columns to create an actual time stamp before you write to the db. Unless of course you have one column for date, one column for time, and one column for AM/PM. I would not recomend that type of structure in the db.

Transfer Data from excel to text file or SAP R/3

Hi,
Can anyone please let me know if there is any function module to transfer data from excel to a .txt file.
I am using a CRM 5.0 system and some standard SAP function modules are missing.
I want to fetch data from excel to SAP R/3.
Wish you great time.
Best Regards
Sid

Hi Sid,
extracting data from an excel sheet to SAP u can use the function module GUI_UPLOAD.
I am providing u its parameters also as it might be useful to u.
The mandatory fields here are FILENAME n in TABLES (in which u will be saving ur data).
and also if u need to download from sap to any file u can use GUI_DOWNLOAD in which u can save data in both excel or txt file.
U can also use SAP_CONVERT_TO_TEX_FORMAT function module to convert into text file.
Rewards would be highly appreciated. Thanks.
CALL FUNCTION 'GUI_UPLOAD'
EXPORTING
 FILENAME =
FILETYPE = 'ASC'
HAS_FIELD_SEPARATOR = ' '
HEADER_LENGTH = 0
READ_BY_LINE = 'X'
DAT_MODE = ' '
CODEPAGE = ' '
IGNORE_CERR = ABAP_TRUE
REPLACEMENT = '#'
CHECK_BOM = ' '
VIRUS_SCAN_PROFILE =
NO_AUTH_CHECK = ' '
IMPORTING
FILELENGTH =
HEADER =
TABLES
 DATA_TAB =
EXCEPTIONS
FILE_OPEN_ERROR = 1
FILE_READ_ERROR = 2
NO_BATCH = 3
GUI_REFUSE_FILETRANSFER = 4
INVALID_TYPE = 5
NO_AUTHORITY = 6
UNKNOWN_ERROR = 7
BAD_DATA_FORMAT = 8
HEADER_NOT_ALLOWED = 9
SEPARATOR_NOT_ALLOWED = 10
HEADER_TOO_LONG = 11
UNKNOWN_DP_ERROR = 12
ACCESS_DENIED = 13
DP_OUT_OF_MEMORY = 14
DISK_FULL = 15
DP_TIMEOUT = 16
OTHERS = 17
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
 WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.

How do I transfer a text file via GPIB from one PC to another?

I need to read a text file from a scope's hdd modify it, and then write it back to the scope hdd. Both the PC and the scope use Windows 2000.

Hello adomon79,
as a first try I would look into the manual of the
scope... And after this I would ask the manufacturer
of the scope.
And if all this fails, I would ask in the Developer
Zone and I would tell what kind of scope I'm using.
Best regards
Gerd
Best regards,
GerdW
CLAD, using 2009SP1 + LV2011SP1 + LV2014SP1 on WinXP+Win7+cRIO
Kudos are welcome

Can ODI transfer next text file to Essbase?

I am new user to ODI, we have a text file with the next format:
ACTUAL
7
1
10100,100000.000,212000.12
10105,100000.000,2350841.03
10107,100000.000,13218068.2
10108,100000.000,128575854
10199,100000.000,-8252694.505
10435,100000.000,1269516.95
Should I change the above format to the next flat format first? Or it is not necessary? ODI can understand the above format? So that it can works as a flat text data store before I map the data to Essbase DB.
The last column is fact measure data.
ACTUAL,7,1,10100,100000.000,212000.12
ACTUAL,7,1,10105,100000.000,2350841.03
ACTUAL,7,1,10107,100000.000,13218068.2
ACTUAL,7,1,10108,100000.000,128575854
ACTUAL,7,1,10199,100000.000,-8252694.505
ACTUAL,7,1,10435,100000.000,1269516.95
Please advise and confirm, thanks!

Hi,
Yes it is certainly possible and there a number of ways to achieve it.
It will be achieved in a pretty straight forward interface, you can ignore the first few lines in your file datastorre ( you could even read them lines in and set variables, personally I would set variables based on the first 3 lines and then use the variables in the interface)
The rest will be simple mappings in the interface, you could hard code some of the values into the target mapping or use variables which would be better, if you are going to use variables then you will need to use a package, declare/refresh/set them and add the interface.
Cheers
John
http://john-goodwin.blogspot.com/

I recently upgraded from a iMac mini PPC (pre-intel chip) to a new iMac (intel chip). I know that some of my software won't functionally transfer over, but I have some files that were done using Appleworks (.cwk text files) that won't open. Conversion?

Is there a way to convert .cwk text files I saved from my iMac PPC so I can view them on my new iMac (intel chip)? I get a message when I try to open them now that says PowerPC applications are no longer supported.

1. Read Roger Wilmut's excellent series of articles: Abandoning Appleworks
2. Considering running Appleworks in Snow Leopard (with Rosetta) installed into Parallels for use in Lion or Mt. Lion
[click on image to enlarge]

FM to Transfer text file from SAP to Windows Network Folder

Hi Guys,
I have requirement, where I am generating a text file thru the program and program
take the path and stores the file..every thing works fine..
but the problem is that, I am searching for a FM with which, A restricted user defined folder from windows network is the place where the file supposed to be
sent..coz. the folder is restricted to a single user.
friends, if you could throw some light and share your experty would be highly
appreciated..
Thanks in advance.

Hi!
Check out this:
Class: CL_GUI_FRONTEND_SERVICES
Method: GET_SAPGUI_DIRECTORY
It will return a dir like this: C:DocumentsXYSAPWorkdir
Just cut the SAPWorkdir and you are in the user's dir.
You can check out other methods also, if this one does not fit your needs. Use SE24 transaction for it.
Regards
Tamá

Data transfer from text file to internal table

Hi, i am uploading data from a text file to an internal table itab.
one of the field in the text file is in the format of p(7,2).
while uploading , this is not not getting uploaded correctly,
for ex instead of uploading 00008.00 in the itab, it gives a strange value of 30303030382>3.03. how to correct this?
pls help

Hello Rahul,
Do the following:
types: begin of ty_upload,
         string type string,
       end of ty_upload.
types: begin of ty_fields,
         text1(20),
         wert      type p decimals 2,
         text2(20),
       end of ty_fields.
data: it_upload type table of ty_upload,
      it_fields type table of ty_fields,
      wa_upload type ty_upload,
      wa_fields type ty_fields.
CALL FUNCTION 'GUI_UPLOAD'
EXPORTING
    filename                      = 'C:\aa_upload.txt'
   FILETYPE                      = 'ASC'
IMPORTING
FILELENGTH                    =
HEADER                        =
tables
    data_tab                      = it_upload
EXCEPTIONS
FILE_OPEN_ERROR               = 1
Populate the internal table it_fields accordingly in a loop run, e.g.
loop at it_upload into wa_upload.
wa_fields-text1 = wa_upload-string(20).
wa_fields-wert = wa_upload-string+20(10).
wa_fields-text2 = wa_upload-string+30.
append wa_fields to it_fields.
endloop.
When your offsets are set correctly, there shouldn't be any problem.
Regards,
Heinz

Arbitrary waveform generation from large text file

Hello,
I'm trying to use a PXI 6733 card hooked up to a BNC 2110 in a PXI 1031-DC chassis to output arbitrary waveforms at a sample rate of 100kS/s. The types of waveforms I want to generate are generally going to be sine waves of frequencies less than 10 kHz, but they need to be very high quality signals, hence the high sample rate. Eventually, we would like to go up to as high as 200 kS/s, but for right now we just want to get it to work at the lower rate.
Someone in the department has already created for me large text files > 1GB with (9) columns of numbers representing the output voltages for the channels(there will be 6 channels outputting sine waves, 3 other channels with a periodic DC voltage. The reason for the large file is that we want a continuous signal for around 30 minutes to allow for equipment testing and configuration while the signals are being generated.
I'm supposed to use this file to generate the output voltages on the 6733 card, but I keep getting numerous errors and I've been unable to get something that works. The code, as written, currently generates an error code 200290 immediately after the buffered data is output from the card. Nothing ever seems to get enqued or dequed, and although I've read the Labview help on buffers, I'm still very confused about their operation so I'm not even sure if the buffer is working properly. I was hoping some of you could look at my code, and give me some suggestions(or sample code too!) for the best way to achieve this goal.
Thanks a lot,
Chris(new Labview user)

Chris:
For context, I've pasted in the "explain error" output from LabVIEW to refer to while we work on this. More after the code...
Error -200290 occurred at an unidentified location
Possible reason(s):
The generation has stopped to prevent the regeneration of old samples. Your application was unable to write samples to the background buffer fast enough to prevent old samples from being regenerated.
To avoid this error, you can do any of the following:
1. Increase the size of the background buffer by configuring the buffer.
2. Increase the number of samples you write each time you invoke a write operation.
3. Write samples more often.
4. Reduce the sample rate.
5. Change the data transfer mechanism from interrupts to DMA if your device supports DMA.
6. Reduce the number of applications your computer is executing concurrently.
In addition, if you do not need to write every sample that is generated, you can configure the regeneration mode to allow regeneration, and then use the Position and Offset attributes to write the desired samples.
By default, the analog output on the device does what is called regeneration. Basically, if we're outputting a repeating waveform, we can simply fill the buffer once and the DAQ device will reuse the samples, reducing load on the system. What appears to be happening is that the VI can't read samples out from the file fast enough to keep up with the DAQ card. The DAQ card is set to NOT allow regeneration, so once it empties the buffer, it stops the task since there aren't any new samples available yet.
If we go through the options, we have a few things we can try:
1. Increase background buffer size.
I don't think this is the best option. Our issue is with filling the buffer, and this requires more advanced configuration.
2. Increase the number of samples written.
This may be a better option. If we increase how many samples we commit to the buffer, we can increase the minimum time between writes in the consumer loop.
3. Write samples more often.
This probably isn't as feasible. If anything, you should probably have a short "Wait" function in the consumer loop where the DAQmx write is occurring, just to regulate loop timing and give the CPU some breathing space.
4. Reduce the sample rate.
Definitely not a feasible option for your application, so we'll just skip that one.
5. Use DMA instead of interrupts.
I'm 99.99999999% sure you're already using DMA, so we'll skip this one also.
6. Reduce the number of concurrent apps on the PC.
This is to make sure that the CPU time required to maintain good loop rates isn't being taken by, say, an antivirus scanner or something. Generally, if you don't have anything major running other than LabVIEW, you should be fine.
I think our best bet is to increase the "Samples to Write" quantity (to increase the minimum loop period), and possibly to delay the DAQmx Start Task and consumer loop until the producer loop has had a chance to build the queue up a little. That should reduce the chance that the DAQmx task will empty the system buffer and ensure that we can prime the queue with a large quantity of samples. The consumer loop will wait for elements to become available in the queue, so I have a feeling that the file read may be what is slowing the program down. Once the queue empties, we'll see the DAQmx error surface again. The only real solution is to load the file to memory farther ahead of time.
Hope that helps!
Caleb Harris
National Instruments | Mechanical Engineer | http://www.ni.com/support

UCMA 4 and back to backing a file transfer request

OK, I know that file transfer isn't technically supported on UCMA 4.0, but I wanted to take another look at it and see whether there was a way to b2b a file transfer request. After all, there's no reason that it shouldn't work if the messaging is correct,
right? The scenario I have is A <-b2b-> app <-b2b->B. I have an IM conversation going on between A and B, so now I'm trying to set it up so that A can send a file to B.
So far I've extended the platform to accept file transfer requests by creating my own call and factory classes, and then registering them using RegisterPlatformExtension. This means that when A sends a file, the INVITE gets delivered to my application.
Now I'm taking that INVITE and creating a new b2b call. A file transfer request looks something like this:
TL_INFO(TF_PROTOCOL) [0]16A8.4B28::02/10/2015-19:53:05.007.001d492f (SIPStack,SIPAdminLog::ProtocolRecord::Flush:ProtocolRecord.cpp(265))[3939761282] $$begin_record
Trace-Correlation-Id: 3939761282
Instance-Id: FDB3
Direction: incoming
Peer: 10.0.154.20:49282
Message-Type: request
Start-Line: INVITE sip:[email protected] SIP/2.0
From: <sip:[email protected]>;tag=eafd3e699d;epid=ccd5657cac
To: <sip:[email protected]>
Call-ID: 0acf0330423241258576d7c5cc42aa01
CSeq: 1 INVITE
Contact: <sip:[email protected];opaque=user:epid:d2lIs-103l2YSpDwCSajtAAA;gruu>
Via: SIP/2.0/TLS 10.0.154.20:49282
Max-Forwards: 70
Content-Length: 1920
Content-Type: multipart/mixed;boundary="----=_NextPart_000_0026_01D04541.4641C2D0"
Message-Body:
------=_NextPart_000_0026_01D04541.4641C2D0
Content-Type: application/sdp
Content-Transfer-Encoding: 7bit
Content-ID: <[email protected]>
Content-Dis; handling=optional; ms-proxy-2007fallback
v=0
o=- 0 0 IN IP4 192.168.200.71
s=session
c=IN IP4 192.168.200.71
b=CT:99980
t=0 0
m=data 21300 TCP/RTP/SAVP 127
a=ice-ufrag:lYAu
a=ice-pwd:y0gkW4r9zGSW6E2VdtMprlEh
a=candidate:1 1 TCP-PASS 2120613887 192.168.200.71 10856 typ host
a=candidate:1 2 TCP-PASS 2120613374 192.168.200.71 10856 typ host
a=candidate:2 1 TCP-ACT 2121006591 192.168.200.71 21300 typ host
a=candidate:2 2 TCP-ACT 2121006078 192.168.200.71 21300 typ host
a=candidate:3 1 TCP-PASS 2120612863 10.0.154.20 31624 typ host
a=candidate:3 2 TCP-PASS 2120612350 10.0.154.20 31624 typ host
a=candidate:4 1 TCP-ACT 2121005567 10.0.154.20 3921 typ host
a=candidate:4 2 TCP-ACT 2121005054 10.0.154.20 3921 typ host
a=cryptoscale:1 client AES_CM_128_HMAC_SHA1_80 inline:4CZbzYM/GYDbygj8JwMTodKo85C4Xx7TMzeMIuBU|2^31|1:1
a=crypto:2 AES_CM_128_HMAC_SHA1_80 inline:Ohlo65gDsUvxCF39A382Rl4vGL+SG9R/lUEYU/br|2^31|1:1
a=crypto:3 AES_CM_128_HMAC_SHA1_80 inline:EZ7Zm3K0H/WW5K49LAk9/C0T8x8nhkumJOycSek7|2^31
a=setup:active
a=connection:new
a=rtcp:21300
a=mid:1
a=sendonly
a=rtpmap:127 x-data/90000
------=_NextPart_000_0026_01D04541.4641C2D0
Content-Type: application/ms-filetransfer+xml
Content-Transfer-Encoding: quoted-printable
Content-ID: <[email protected]>
Content-Dis; handling=optional
<request xmlns=3D"http://schemas.microsoft.com/rtc/2009/05/filetransfer" =
requestId=3D"13">
<publishFile>
<fileInfo embedded=3D"true">
<id>{67190A30-C59F-480D-96DD-5F3941C39C49}</id>
<name>dbchange.log</name>
<size>3609</size>
</fileInfo>
</publishFile>
</request>
------=_NextPart_000_0026_01D04541.4641C2D0--
$$end_record
I've got my b2bed invite looking almost identical to the original invite by creating a custom MIME type on the CallEstablishOptions for the back to back call using something like this:
Regex r = new Regex(@"^((.|\n)*)(\<request)((.|\n)*)(request\>)((.|\n)*)$");
Match m=r.Match(args.RequestData.GetMessageBodyString());
content=string.Format("Content-Transfer-Encoding: quoted-printable\r\n{0}{1}{2}",m.Groups[3],m.Groups[4],m.Groups[6]);
opt.CustomMimeParts.Add(new MimePartContentDescription(new ContentType("application/ms-filetransfer+xml"),System.Text.ASCIIEncoding.UTF8.GetBytes(content)));
opt.CustomMimeParts[0].ContentDispositionHeader = new SignalingHeader("Content-Disposition", "render; handling=optional");
So far the only differences I can see in my outbound message vs the original SDP are that the Content-Transfer-Encoding might not be seen as a header (since the SignalingHeaders property on the MimePartContentDescription is read only), and the Content-Transfer-Encoding
on the first MIME part (created by the BackToBackCall) is missing (even though I specified it on the PassThroughHeaders). Even with all of this though, I still get a 488 on client B when I attempt the transfer (even though the invite goes through).
What I'm wondering though, is whether there's any way at all to get this working the way I'd expect, where a file gets transferred directly between A and B, without my bot having to receive it first. The other approach I've looked at is binding my
own media provider class to customize the SDP, but if this MIME part approach isn't going to work, then I have a feeling the media provider won't work either.
Any suggestions on where to look next?
Thanks!
Chris

Chris,
I am trying to do something similar to this and from what I have read and in talking to MS is that you need to extend the Call and Flow class which it looks like you have been able to do. Could I bother you to share what you have written? Maybe we can help
each other out on this. I am basically trying to create an application that will be able to capture a file transfer and save it, then send the original request on to the intended recipient.
Thanks in advance,
Anthony

How to upload a text file from a shared folder and provide an o/p

how to upload a text file from a shared folder and provide an o/p containing the details in each order in the text file

Hi,
Use GUI_UPLOAD to upload a text file from a shared folder.
Use GUI_DOWNLOAD to download data in a file on the presentation server or use OPEN DATASET, TRANSFER and CLOSE DATASET statements to download data to the application server.
Now, I hope the code for data fetching, if required, is already present in the report.
Reward points if the answer is helpful.
Regards,
Mukul

Print text file to client side printer

Hi all,
I have a character mode report which will print to a client side dot matrix printer in 6i. After converted to 10g, we cannot print to the client side printer (because we don't want to map so many print queue from the AS).
So, I try to generate the report to a text file, then use webutil to transfer the txt file to the client PC, and then use Client_HOST to call the window PRINT command to print the text file to the client side printer.
I have test this is successful, however, when I try to do the same thing to a report with Vietnam character, then it is not.
The print request is sent to the printer, but the printer have no response.
But that file can be print successfully if I open in Notepad and then print manually.
I try to use window TYPE command and COPY command, but still have no luck.
Can anyone give me some suggestions for this....
Thanks!

Qiu (guest) wrote:
: In the browser/applet, the default "print" button can only
print
: screen to local printer, not the data I want. Use Report
server,
: I can't directly print to client side printer. Is there a way
to
: print data to local printer after press a button?
Are u using Run_Product function in the when button pressed,
then u can specify the format in which u want the output, option
available are HTML and PDF, report server runs the report on the
server and sends the output to the client machine. On the client
machine u have to open the file and print it. I cannot print the
report itself on the client machine.
Try.
Sailesh
null

Text File is not picking with data

Hi Experts,
I am doing file to file scenario without IR as file will be generated by the ECC system and places in SAP FTP App Server.
My job is to pick up the file and send it to the Third Party Application Server.
But when i am picking up the Text file the data in the file is converting into special characters like below format.
ÅÁÄÅÙ@ððððððâÖÕÄÅçöôðð@@@@@@òððùð÷ñ÷ðñ%@@@@@@@@@@@@@@òððùð÷ñ÷%ÄÅãÁÉÓ@ðððð
I have tested with other Application server with same file its working fine, but when i send the file from SAP FTP Appl server the data is converting in the above format.
Right now when i open file zilla it is opening with 3 FTP Appl Server in that suppose lets say the FTP are APP1, APP2, APP3.
1.When i send the file from APP1 through Transport Protocol NFS System the file is picking up and placing successfully in the Third Party APP3 App Server fiolder but the data in the file is converting into special charaters.
2.when i send the same file from APP2 through Transport Protocal FTP the file is picking up and placing successfully in the third party APP3 App server and here the same data is coming in the text file, there is no data conversion.
I am not getting here, when i send the file from APP1 the data is converting but when i send the same file from APP2 App srever the data is posting correctly.
And also i can give you one more info.. if i try with puting the Transport Protocal as FTP in APP1 then i am getting error in sender comm channel as 'log on attempt by User JOHN rejected' : contact your FTP server vendor.
But i think for sending the file from SAP Appl Server we can use TP as NFS rather than FTP.
And also i can give one more info: The Version is the ECC system is using the 4.6c for which there is no compatability for unicodes.
Can anyone please advise what would be the wrong.
Appreciate your inputs
Thanks,
Bhaskar

Hi,
Reason because file is not picked up.
>'log on attempt by User JOHN rejected' : contact your FTP server vendor.
clearly user/password for this FTP server or system is not correct. Get correct userid/password for your Application server where you are trying to poll.
>The Version is the ECC system is using the 4.6c for which there is no compatability for unicodes
File transfer is nothing to unicode here.
Regards,
Gourav

How to automate loading data from a text file ?

Hi,
I need to load a data form a text file automatically. (for example: every day at 6.p.m) .
It is possible to use DBMS_SCHEDULER with SQL LOADER ? or maybe u have others idea ?
regards,

assuming that the text file resides at the machine where the database is installed at you can create a procedure that use the built-in UTL_FILE package to read and load the data to the oracle tables. then create a job that use the DBMS_JOB or DBMS_SCHEDULER to create an automated schedule to run the job that calls the procedure you have created.
or assuming that the text file resides or at the local/client machine (example c:\ drive) on a windows xp platform. create a batch file that do a ftp to transfer the text file to the oracle database server and create a schedule job using the windows scheduler. also create a procedure that use the built-in UTL_FILE package to read and load the data to the oracle tables. then create a job that use the DBMS_JOB or DBMS_SCHEDULER to create an automated schedule to run the job that calls the procedure you have created.

How do I move text files from my desktop to my iPod Touch?

How do I transfer (export) text files from my Mac (word processor files) to the Notes app on my iPod?

WesternGuy wrote:
I am going to assume that I can move individual profiles, or even delete profiles that I no longer need.
Just be aware that if you delete or don't move profiles that are currently assigned to images LR will (without warning) reassign those images with the Adobe Standard profile.
You can use AnyFilter, Data Explorer, or DevMeta plugins to determine if any images are assigned to a profile you want to delete. You can then reassign the profile of your choice. Once that's completed you can safely delete the camera profile.

Text file transfer ?

Similar Messages

Maybe you are looking for