Text header in sapscript

Dear all,
I try to insert text object VBBK, ID "0002" for instance into my SAPscript form. I've succeed to do it for a given sales order (using include in SAPscript) but since the text name = my sales order, I'll find it in every sales orders. While my text header is related to only one specific sales order. I've red that using FM READ_TEXT would fix the issue. However I can not figure out how does this work with a text name which depends on the sales order number printed out.
Any help would be welcome.
Best regards.
Nozome.

Hi
Check at runtime if VBDKA-VBELN has a value .
If not then use a wrokarea which will always have a values of sales order number at runtime.
ALso the sales order text should exist in database.
Goto SE16 table STXH
TDOBJECT - VBBK
TDANME - Sales Order No. you are tring to Print
TDID - 0002
SPARS - EN
You can cross check this using VA03 as well . If text exist then only it will print.
If an entry does not exist here then in sapscript it will output a blank. I guess you have an entry for the Sales Order No 33333 you mentioned in earlier mail.
Cheers

Similar Messages

What is use of Read-Text command in Sapscript plz replay

What is use of Read-Text command in Sapscript plz replay
i m geting problem with read-text command in sapscript as will as
perform and endperform .

Hi Majid,
It's a function module to read the texts from a text file. Generally it is used to retrieve the long texts.
The function module reads the desired text from the text file, the text memory, or the archive. You must fully specify the text using OBJECT, NAME, ID, and LANGUAGE. An internal work area can hold only one text; therefore, generic specifications are not allowed with these options.
After successful reading, the system places header information and text lines into the work areas specified with HEADER and LINES.
If a reference text is used, SAPscript automatically processes the reference chain and provides the text lines found in the text at the end of the chain. If an error occurs, the system leaves the function module and triggers the exception REFERENCE_CHECK.
CALL FUNCTION 'READ_TEXT'
EXPORTING
CLIENT = SY-MANDT
OBJECT = ?...
NAME = ?...
ID = ?...
LANGUAGE = ?...
ARCHIVE_HANDLE = 0
IMPORTING HEADER =
TABLES LINES = ?...
EXCEPTIONS ´
ID =
LANGUAGE =
NAME =
NOT_FOUND =
OBJECT =
REFERENCE_CHECK =
WRONG_ACCESS_TO_ARCHIVE =
Export parameters
Specify the client under which the text is stored. If you omit this parameter, the system uses the current client as default.
Reference field: SY-MANDT
Default value: SY-MANDT
OBJECT
Enter the name of the text object to which the text is allocated. Table TTXOB contains the valid objects.
Reference field: THEAD-TDOBJECT
NAME
Enter the name of the text module. The name may be up to 70 characters long. Its internal structure depends on the text object used.
Reference field: THEAD-TDNAME
ID
Enter the text ID of the text module. Table TTXID contains the valid text IDs, depending on the text object.
Reference field: THEAD-TDID
LANGUAGE
Enter the language key of the text module. The system accepts only languages that are defined in table T002.
Reference field: THEAD-TDSPRAS
ARCHIVE_HANDLE
If you want to read the text from the archive, you must enter a handle here. The system uses it to access the archive. You can create the handle using the function module ACHIVE_OPEN_FOR_READ.
The value '0' indicates that you do not want to read the text from the archive.
Reference field: SY-TABIX
Default value: 0
Import parameters:
HEADER
If the system finds the desired text, it returns the text header in this parameter.
Structure: THEAD
Table parameters:
LINES
The table contains all text lines that belong to the text read.
Structure: TLINE
Exceptions:
ID
The text ID specified in the parameter ID does not exist in table TTXID. It must be defined there together with the object of the text module.
LANGUAGE
The parameter LANGUAGE contains a language key that does not exist in table T002.
NAME
The parameter NAME contains the name of a text module that does not correspond to the SAPscript conventions.
Possible errors:
The field contains only blanks.
The field contains the invalid characters * or ,.
OBJECT
The parameter OBJECT contains the name of a text object that does not exist in table TTXOB.
NOT_FOUND
The system did not find the specified text module.
REFERENCE_CHECK
The text module to be read has no text lines of its own but refers to the lines of another text module. This reference chain can include several levels. For the current text, the chain is interrupted, that is, one of the text modules referred to in the chain no longer exists.
WRONG_ACCESS_ TO_ARCHIVE
The exception WRONG_ACCESS_TO_ARCHIVE is triggered if an archive is accessed using an incorrect or non-existing archive handle or an incorrect mode (that is, read if the archive is open for writing or vice versa).
Br,
laxmi.

Why is text header removed on compilation?

Hi,
I have a text header on my functions/procedures/packages, with standard stuff like name, developer, version history etc. When I open the file in SQL developer and compile my object, the text section at the top is removed? Anyone know why this is happening?
Thanks,
Mike

>
I have a text header on my functions/procedures/packages, with standard stuff like name, developer, version history etc. When I open the file in SQL developer and compile my object, the text section at the top is removed? Anyone know why this is happening?
>
Yes - if you put comments before or after the function/procedure/package it is not part of the function/procedure/package; it is just a comment.
Only the text that is part of the definition is saved in the data dictionary.
The comment below WILL NOT not be saved in the data dictionary.
   this comment is BEFORE the function declaration and IS NOT part of the function
CREATE OR REPLACE FUNCTION SCOTT.get_emp1( p_ename in emp1.ename%type )
RETURN VARCHAR2
as
begin
    dbms_output.enable(20000);
    dbms_output.put_line('Value provided was ' || p_ename);
--    dbms_output.disable();
    RETURN p_ename;
end;
/The comment below WILL be saved in the data dictionary.
CREATE OR REPLACE FUNCTION SCOTT.get_emp1( p_ename in emp1.ename%type )
RETURN VARCHAR2
as
   this comment is AFTER the function declaration and IS part of the function
begin
    dbms_output.enable(20000);
    dbms_output.put_line('Value provided was ' || p_ename);
--    dbms_output.disable();
    RETURN p_ename;
end;
/

Print text vertically in SAPScript

Hi,
How to print text vertically in SAPScript?
Can we use controls for it?
Please help its urgent.
Thanks,
Madhura

You can print horizantally. using the following code
You know the total length of your text right.
You need to have conditions to avoid unnecessary spaces.
If &v_text(1)& is not initial.
ph &v_text(1)&
endif.
if &v_text+1(1) is not initial.
ph &v_text+1(1)
enddif.
if &v_text+2(1) is not initial.
ph &v_text+2(1)
enddif.
But we cant rotate letters to left . Not sure . Will explore on it and let you know.
Reward points if useful.
Regards,
Nageswar

Problem in including text id in sapscript

Hi,
I am using the following command to include a text id in sapscript.
INCLUDE &VBDKR-XBLNR& OBJECT VBBK ID Z001 LANGUAGE &VBDKR-SPRAS_VKO&
But the text is not showing in form. Now when I debug the sap script I found that altough VBDKR-XBLNR is holding value 0060000120 but the at include commant the value passed is 60000120.
So the text id is not found.
How to resolve this problem.
Regards,
Mainak

Solution:
INCLUDE &VBDKR-XBLNR(K)& OBJECT VBBK ID Z001 LANGUAGE &VBDKR-SPRAS_VKO&
see the (K) within your variable &VBDKR-XBLNR(K)&.
this k makes him skip conversion routine which is responsible for cutting the leading zeros.
/edit
You can as well use VBDKR-TDNAME which is by default your invoice number WITH leading zeros.
while VBDPR-TDNAME is your invoice number with leading zeros AND your position number right concatenated to it.
Edited by: Florian Kemmer on Mar 4, 2009 3:43 PM

Append Text Header for Binary file

Hello Experts
I am using LabView 7.0 with PCI 6040 DAQ. I have created two separate files, one file is Binary that collects binary raw data from 16 channels of the DAQ. The second file contains variable length Header, i.e the information about all 16 channels and physical conditions of the recording. I am trying to merge these two files to form a single file that contains a text header at the top and followed by the binary data. I am unable to figure out that how can I append binary data to a text file.
I need help from users please.
Ciao!!!!
Nabeel

Hi Chris, Dev
I am working on Implementation of EDF file format (European data Format) in Lab View. This file format is widely becoming a standard to acquire and store the physical data of patients. In short, the specification of the file can b read at ( http://www.hsr.nl/edf/specs/edf.html ). Most of the companies that develop equipments for EEG (electroencephalogram) are implementing this format to read and write data. In my experiments I am also using the same file format but just to acquire and store. For reading and analysing the data Matlab is widely used instead of Labview. Dev, I have just start introducing myself to the idea of Data loggers.
Dear Chris I have labview 7.0, is it possible to reload the file for 7.0? If not can you load it as a picture format?
Regards
Nabeel

Report Text Header in V5.01/5.02

I would like to create a Text header for some reports going to a core system (ie. first two lines only), however Essbase insists on inserting a PAGE HEADING to each page. I have attempted to change to page length to avoid this problem, but the problem persists.

I have used {SUPHEADING} quite a bit but not in combination with the {TEXT} command.. Haven't found a problem but then again, haven't tried "really long" output > say, 10000 rows or so..I have also set the page length before to suppress the heading display and, if I remember right, it worked ok.. I has been a while..Tim TowApplied OLAP, Inc

How do you change color of text in a sapscript?

Hi All,
How do you change color of text in a sapscript?
Thanks in advance,
sathish

Hi,
It is is not possible in script.
just check out this weblog
they have already discussed about color in sapscript.
Re: SAPSCRIPTS IN COLOR
Regards
Kiran

How to Print Header text in PO SAPScript

Hi Gurus,
I am working on PO Script (MEDRUCK). I copied the Standard to a Z form. ZMM_MEDRUCK, Now I need to print the the Header text at the end of MAIN window. I created a a perform and call it from the Script and read the heder text by using FM Read_text
DEFINE &TEXT1& = ' '
PERFORM GET_TERMS IN PROGRAM ZMM_MEDRUCK_ROUTINE
USING &EKKO-EBELN&
CHANGING &TEXT1&
ENDPERFORM
PROTECT
&TEXT1&
ENDPROTECT
but while returning I am getting only one line. Can any body suggest me how I can read the Header text in PO script. Please provide the sample Code.
Regards
Sony

Hi,
Use this Function module 'READ_TEXT'
T_lines contains the header text, you can loop it and display it in sap script
Function module to read the header text
CALL FUNCTION 'READ_TEXT'
    EXPORTING
      client                  = sy-mandt
      id                      = 'F01'
      language                = sy-langu
      name                    = ekko-ebeln
      object                  = ekko
    TABLES
      lines                   = t_lines
    EXCEPTIONS
      id                      = 1
      language                = 2
      name                    = 3
      not_found               = 4
      object                  = 5
      reference_check         = 6
      wrong_access_to_archive = 7
      OTHERS                  = 8.
Regards
Krishna

Text printing in SapScript

Hi Abapers,
I am chaniging an existing SapScript that was not working properly. Client wants to print "Item Text" in output which is of 3 to 4 page. where as there is only one line item in PO. Also there is "Header Text" of 1 page. Client wants to display all line items then "Item Text" should displayed. and at last the "eader Text". The Format is Like as Follows:-
PO No. 12.12.2006
Vendor Name
Country
 S.No. Mat. Desc. Qty. ...............and so on..........
 1 abc 11 .....................
Item Text starts from here........................
Problem is here
This text is of 3 page (say).
So text starts from here and est of text goes to next page.
Only 4 Lines are printed properly and rest of lines are not printed.
I also checked in debuging mode.
so attachibng the code for reference kindly go through this.
Header Text Starts from here
 Total amt. in words......
FORM READ_TEXTSLO1 TABLES IN_TAB200 STRUCTURE ITCSY
 OUT_TAB200 STRUCTURE ITCSY.
READ TABLE IN_TAB200 INDEX 1.
EBELN1 = IN_TAB200-VALUE.
READ TABLE IN_TAB200 INDEX 2.
EBELP = IN_TAB200-VALUE.
CONCATENATE EBELN1 EBELP INTO OBJNAME.
CLEAR WRK_IT1.
CLEAR WRK_IT2.
CLEAR WRK_IT3.
CLEAR WRK_IT4.
CLEAR WRK_IT5.
Repeated Code
SELECT SINGLE TDNAME INTO WRK_TDNAME FROM STXH
 WHERE TDOBJECT = 'EKPO'
 AND TDNAME = OBJNAME
 AND TDID EQ 'F01'.
IF SY-SUBRC = 0.
 CALL FUNCTION 'READ_TEXT'
 EXPORTING
 CLIENT = SY-MANDT
 ID = 'F01'
 LANGUAGE = 'E'
 NAME = OBJNAME
 OBJECT = 'EKPO'
 TABLES
 LINES = IT_LINE.
 IF SY-SUBRC = 0.
 delete it_line where tdline EQ ' '.
BREAK ABAP7.
 DESCRIBE TABLE it_line LINES wrk_lines1.
 LOOP AT IT_LINE.
 CLEAR WRK_TABIX.
 WRK_TABIX = SY-TABIX.
 IF WRK_TDLINE EQ ' '.
 WRK_TDLINE = IT_LINE-TDLINE.
 ELSE.
 CONCATENATE WRK_TDLINE IT_LINE-TDLINE INTO WRK_TDLINE
 SEPARATED BY SPACE.
 ENDIF.
 Y = STRLEN( WRK_TDLINE ).
 CALL FUNCTION 'RKD_WORD_WRAP'
 EXPORTING
 TEXTLINE = WRK_TDLINE
 DELIMITER = ' '
 OUTPUTLEN = 100
 IMPORTING
 OUT_LINE1 = OUT_LINE1
 OUT_LINE2 = OUT_LINE2
 OUT_LINE3 = OUT_LINE3
 OUT_LINE3 =
 TABLES
 OUT_LINES =
 EXCEPTIONS
 OUTPUTLEN_TOO_LARGE = 1
 OTHERS = 2
 IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
 WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
 ENDIF.
*break abap7.
 CASE WRK_TABIX.
 WHEN 1 .
 WRK_IT1 = OUT_LINE1.
 WHEN 2 .
 WRK_IT2 = OUT_LINE1.
 WHEN 3 .
 WRK_IT3 = OUT_LINE1.
 WHEN 4 .
 WRK_IT4 = OUT_LINE1.
 ENDCASE.
 IF OUT_LINE3 EQ ' '.
 WRK_TDLINE = OUT_LINE2.
 ELSE.
 CONCATENATE OUT_LINE2 OUT_LINE3 INTO WRK_TDLINE
 SEPARATED BY SPACE.
 ENDIF.
 ENDLOOP.
 IF WRK_IT4 NE ' '.
 Y = STRLEN( WRK_TDLINE ).
 IF Y GT 50.
 CALL FUNCTION 'RKD_WORD_WRAP'
 EXPORTING
 TEXTLINE = WRK_TDLINE
 DELIMITER = ' '
 OUTPUTLEN = 50
 IMPORTING
 OUT_LINE1 = OUT_LINE1
 OUT_LINE2 = OUT_LINE2
 OUT_LINE3 = OUT_LINE3
 OUT_LINE3 =
 TABLES
 OUT_LINES =
 EXCEPTIONS
 OUTPUTLEN_TOO_LARGE = 1
 OTHERS = 2
 IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
 WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
 ENDIF.
 wrk_it4 = out_line1. " Change Uncommented"
 WRK_ITA = OUT_LINE1.
 WRK_ITA4 = OUT_LINE2.
 ELSE.
 WRK_ITA = WRK_TDLINE.
 ENDIF.
 ENDIF.
 ENDIF.
 CLEAR WRK_TDLINE.
 CLEAR OUT_LINE1.
 CLEAR OUT_LINE2.
 CLEAR OUT_LINE3.
 OUT_TAB200-VALUE = WRK_IT1.
 MODIFY OUT_TAB200 INDEX 1 TRANSPORTING VALUE.
 OUT_TAB200-VALUE = WRK_IT2.
 MODIFY OUT_TAB200 INDEX 2 TRANSPORTING VALUE.
 OUT_TAB200-VALUE = WRK_IT3.
 MODIFY OUT_TAB200 INDEX 3 TRANSPORTING VALUE.
 OUT_TAB200-VALUE = WRK_IT4.
 MODIFY OUT_TAB200 INDEX 4 TRANSPORTING VALUE.
ENDIF.
*****************************************************************Repeated code
Again the same code is repeated but now the TDID eq F02 in Select Query and also in READ_TEXT Fun. Module. and now in the CASE statement next 4 lines coded as
WHEN 1 .
 WRK_IT5 = OUT_LINE1.
 WHEN 2 .
 WRK_IT6 = OUT_LINE1.
 WHEN 3 .
 WRK_IT7 = OUT_LINE1.
 WHEN 4 .
 WRK_IT8 = OUT_LINE1.
and also these 4 rows modified as follows
OUT_TAB200-VALUE = WRK_IT5.
 MODIFY OUT_TAB200 INDEX 5 TRANSPORTING VALUE.
Now each time 4 - 4 rows coded as like as above.
upto TDID = F05
So there are total of 20 lines.
Now the text is of 4 to 5 page then its not printed. even 5th line is not printed. control not goes to 2nd Select Query cause the OBJECTNAME does not exist.
for more information write your Email ID . So that i can explain more.
So kindly review this and let me know what should i do ?
Helpful answer rewarded.
Regards
Robin

hi,
SAP SCRIPTS TUTORIALS
http://www.sapbrain.com/TUTORIALS/TECHNICAL/SAPSCRIPTS_tutorial.html
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/BCSRVSCRPROG/BCSRVSCRPROG.pdf
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/BCSRVSCRRDI/BCSRVSCRRDI.pdf
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/BCSRVSCREDIT/BCSRVSCREDIT.pdf
http://www.sappoint.com/abap/sscrtpex1.pdf
http://www.sap-img.com/sapscripts.htm
http://www.esnips.com/doc/1ff9f8e8-0a4c-42a7-8819-6e3ff9e7ab44/sapscripts.pdf
SAP Script From the Scratch
http://www.sapbrain.com/TUTORIALS/TECHNICAL/SAPSCRIPTS_tutorial.html
http://www.sap-img.com/sapscripts.htm
http://sappoint.com/abap/
http://www.henrikfrank.dk/abapexamples/SapScript/sapscript.htm
http://www.henrikfrank.dk/abapexamples/SapScript/symbols.htm
http://sapbrain.com/TUTORIALS/TECHNICAL/SAPSCRIPTS_tutorial.html
http://www.esnips.com/doc/1ff9f8e8-0a4c-42a7-8819-6e3ff9e7ab44/sapscripts.pdf
http://www.esnips.com/doc/cb7e39b4-3161-437f-bfc6-21e6a50e1b39/sscript.pdf
http://www.esnips.com/doc/fced4d36-ba52-4df9-ab35-b3d194830bbf/symbols-in-scripts.pdf
http://www.esnips.com/doc/1e487f0c-8009-4ae1-9f9c-c07bd953dbfa/script-command.pdf
http://www.esnips.com/doc/b57e8989-ccf0-40d0-8992-8183be831030/sapscript-how-to-calculate-totals-and-subtotals.htm
http://esnips.com/doc/64d4eccb-e09b-48e1-9be9-e2818d73f074/faqss.pdf
http://esnips.com/doc/1e487f0c-8009-4ae1-9f9c-c07bd953dbfa/script-command.pdf
http://esnips.com/doc/1ff9f8e8-0a4c-42a7-8819-6e3ff9e7ab44/sapscripts.pdf.
http://esnips.com/doc/cb7e39b4-3161-437f-bfc6-21e6a50e1b39/sscript.pdf
http://esnips.com/doc/fced4d36-ba52-4df9-ab35-b3d194830bbf/symbols-in-scripts.pdf
http://esnips.com/doc/b57e8989-ccf0-40d0-8992-8183be831030/sapscript-how-to-calculate-totals-and-subtotals.htm
Rgds
Anver
if hlped pls mark points

How to get a long text into the SapScript

Hi.
I need to read text from header field from ME21N. I use to this READ_TEXT function module, which is called from SapScript but the problem is, that this function returns me just about 80 chars and trim rest of string.
First idea was use loop in form, but is impossible, how to solve this problem.
Thanks

Problem was solved :
INCLUDE &EKKO-EBELN& OBJECT EKKO ID F01 LANGUAGE &EKKO-SPRAS&
Edited by: Daniel Duras on Apr 23, 2008 10:51 PM

ADRS Text swaps in SAPscript Debugger

Can somebody explain this to me?
Execute form F110_IN_AVIS in the SAPScript debugger (Activate the debugger then execute a printing test)
Why do all the ADRS text ID includes change?
Here is a trace snippet:
WRITE_FORM_LINES Lines Window MAIN Func. SET BODY
WRITE_FORM_LINES Lines Window FOOTER Func. SET BODY
WRITE_FORM_LINES Lines Window HEADER Func. SET BODY
WRITE_FORM_LINES Lines Window ADDRESS Func. SET BODY
WRITE_FORM_LINES Lines Window MAIN Func. SET BODY
WRITE_FORM_LINES Lines Window MAIN Func. SET BODY
WRITE_FORM_LINES Lines Window MAIN Func. SET BODY
WRITE_FORM_LINES Lines Window MAIN Func. SET BODY
WRITE_FORM_LINES Lines Window MAIN Func. SET BODY
WRITE_FORM_LINES Lines Window MAIN Func. SET BODY
/: INCLUDE ADRS_SENDER OBJECT TEXT ID ADRS
W TD439 INCLUDE TEXT ,ADRS_SENDER ,ADRS,D is not available
/: INCLUDE ADRS_FOOTER OBJECT TEXT ID ADRS
W TD439 INCLUDE TEXT ,ADRS_FOOTER ,ADRS,D is not available
/: INCLUDE ADRS_HEADER OBJECT TEXT ID ADRS
W TD439 INCLUDE TEXT ,ADRS_HEADER ,ADRS,D is not available
WRITE_FORM_LINES Lines Window MAIN Func. SET BODY
WRITE_FORM_LINES Lines Window MAIN Func. SET BODY
WRITE_FORM_LINES Lines Window MAIN Func. SET BODY
WRITE_FORM_LINES Lines Window MAIN Func. SET BODY
WRITE_FORM_LINES Lines Window MAIN Func. SET BODY
WRITE_FORM_LINES Lines Window MAIN Func. SET BODY
WRITE_FORM_LINES Lines Window MAIN Func. SET BODY
ND_FORM
See the ADRS_SENDER, FOOTER and HEADERs, these are nowhere in the form itself:
INCLUDE &REGUD-TXTFU& OBJECT TEXT ID ADRS that is the footer
INCLUDE &REGUD-TXTKO& OBJECT TEXT ID ADRS that is the header
INCLUDE &REGUD-TXTAB& OBJECT TEXT ID ADRS here is the sender
It swaps these out for ADRS_SENDER, ADRS_HEADER and ADRS_FOOTER. Why and how is that? I actually changed the header to a real text element with an ADRS ID and it still changes to ADRS_HEADER.
Try it out and experience my frustration.
Thank You

Here's why:
The program which runs when you select printing test:
RSTXFPR1
Has a form called:
SET_DEFAULT_CONTENT
Which scans includes for ADRS and replaces it with ADRS_window_name.
Amazing, but how am I supposed to test that my headers will work if it changes the names on me???
*....... Set dummy-contents for windows................................
*....... HEADER, FOOTER, ADDRESS(SENDER) ...............................
FORM SET_DEFAULT_CONTENT USING SD_WINDOW.
DATA: BEGIN OF SD_LINES OCCURS 0.
 INCLUDE STRUCTURE TLINE.
DATA: END OF SD_LINES.
DATA:
SD_TEMPLATE LIKE TLINE-TDLINE
 VALUE 'INCLUDE ADRS_<name> OBJECT TEXT ID ADRS'. "#EC NOTEXT
CALL FUNCTION 'READ_FORM_LINES'
 EXPORTING WINDOW = SD_WINDOW
 ELEMENT = SPACE
 TABLES LINES = SD_LINES
 EXCEPTIONS UNOPENED = 1
 OTHERS = 9.
IF SY-SUBRC = 0.
 LOOP AT SD_LINES. CHECK SD_LINES-TDFORMAT = '/:'.
 SHIFT SD_LINES-TDLINE LEFT
 DELETING LEADING SPACE.
 IF SD_LINES-TDLINE(8) = 'INCLUDE '.
 IF SD_LINES-TDLINE CS 'ADRS'.
 SD_LINES-TDLINE = SD_TEMPLATE.
 IF SD_WINDOW = 'ADDRESS'.
 REPLACE '<name>' WITH 'SENDER'
 INTO SD_LINES-TDLINE.
 ELSE.
 REPLACE '<name>' WITH SD_WINDOW
 INTO SD_LINES-TDLINE.
 ENDIF.
 MODIFY SD_LINES.
 ENDIF.
 ENDIF.
 ENDLOOP.
ENDIF.

INCLUDE TEXT (header notes)

I'm trying to write a header note in a sapscript form (using SE71).
I am not allowed to write code outside the form, so I can't use FM READ_TEXT and pass the obtained text to a variable.
I've been trying:
INCLUDE &VAR& OBJECT VBBK ID 0002
where
&VAR&
contains the delivery number. But nothing appears.
What am I doing wrong?
Thanks.

Hi
You wants to add the Header text which is there in the delivery doc header, then
Double click on that text and goes to text ediotr
Goto _>header
see the parameters like OBJECTNAME,OBJECT,ID and Language
you have to use all this 4 parameters in the text in the include statement see the sample
/: INCLUDE &VBDKL-TDNAME& OBJECT VBBK ID 0001 NEW-PARAGRAPH HT
Here
&VBDKL-TDNAME& is the OBJECTNAME (nothing but delivery doc number)
VBBK = Object
0001 = ID
HT = paragraph
So write as above and see
Reward points for useful Answers
Regards
Anji

Photoshop color variables or text heading styles? are they possible?

I am desigining a template which I would like to make in 15-20 different colors. Is there a way to set a color as a variable say "color1" and then set color1 equal to some value, say "#334f74" and then any instance of "color1" would be updated when I changed the value. For example if I have 10 layers each with a color overlay in the blending options they would all be updated to match the new color.
Also, is there some sort of photoshop "heading" system similar to Word, where I can select font size color, aliasing, weight, spacing, etc and save it as a "heading", then assign that heading to my text boxes? So if I change the "heading" then anything using that heading type would be updated.
This all seems like it should be basic functionality for a professional tool like photoshop, but I have been playing around with the variable settings and whatnot and cannot figure it out.
Thanks!

Mylenium is right.
Not only is Photoshop an image editor, it is already bloated with additional features that are not needed if somebody has the correct application for the job.
We don't need more features, we need improvements on problem areas!

Page number after printing a text element in SAPScript

Hello to all,
is it possible to know the page number in which SAPScript print a text element?
Thanks and regards
Franco

Hi!
&PAGE& variable gives you the actual page.
/E MYELEMENT
/: DEFINE &MYPAGE& = &PAGE&
I hope it works...
Regards
Tamá

Text header in sapscript

Similar Messages

Maybe you are looking for