Text is not copied from Customer masterdata to sales document header

Hi Friends,
Text was maintained in customer masterdata, that should be copied in to sales order header. In Quality server its working as per requirement. But in production its not copied from customer master data.
Same configuration settings are in production as well as quality(VOTXN)
Please suggest me regarding this

Hi Durga,
Please go to SD> Basic function > text control> Define and Assign Text Determination Procedures and in that screen, check the customer sales and distribution change view customer sales text and sales note for customer and its assignment .
I hope these will be helpful for you.
Regards,

Similar Messages

  • Text is not copying from delivery to billing

    Dear All,
    I have determined the text from delivery to billing corretly.
    but it is not copied from delivery to billing.
    Is there any settings in copy control kindly suggest.
    Best regards,
    ramesh

    Use T.Code VOTXN"
    Choose on Billing document - Header.
    Click on Change button.
    Select your text procedure.
    You can know your procedure by clicking on the tab Text procedure assignment.
    Click on Text ID's in Textprocedure.
    Select your text id.Check the tick mark under "Refer/Duplicate" field.
    And also check your access seqence
    For understanding/reference, kindly refer following SDN thread
    - Text Determination  Procedure  from Sales order to Delivery ,&Billing
    - Re: Copying Text from Sales to Sales Document
    Thanks & Regards
    JP

  • Text copy from customer master to Sales order and invoice

    Dear friends,
    when i maintain the text in the customer master ther needs to copy to sales order and from sales order to invoice.
    Can you please guide me how to do this config
    Thanks
    Raju.

    Dear Raju,
    First you need to do the Text determination for all areas(i.e Customer Sales and distribution,Sales order header,delivery header and billing header) through VOTXN transaction.
    -->Create the Customer text ID under Object KNVV
    Maintain the text for Text ID in the customer master >sales area data>Extras-> Text
    To copy the customer text to the sales order you need to keep KNVV table as Text object in the sales order text access sequence for the text ID.
    If you want to copy the sales order header text to the invoice header first you need to copy the sales order header text to the delivery header from delivery you can copy to invoice.
    When you want to copy the Text from Sales order to delivery the Access sequence will place a role
    If you want to copy the sales order text to the delivery document The Text Object should be VBBK in the delivery Header Text determination access sequence for that Text ID
    Again you can copy the text from delivery to Billing document through checking the Delivery Text field in the billing document detail screen (Top most bottom of the screen).
    Go to VOFA transaction select your billing document type then go in to the details here you can find the Delivery Text field you just check that check box.
    Now system will copy the sales order header text to the delivery header then it will copy to the invoice header.
    I hope this will help you,
    Regards,
    Murali.

  • Text is not copying from InDesign to any other application

    Hi.
    I'm not able to copy the content from inDesign CS2 to any other application (textEdit, MS-word etc) even I'm fail to import the doc file in to inDesign, while placing the document file in inDesign it keeps the document file inactive.
    In past everything was going good but from last months onward I'm facing this problem. Could anybody please help me to resolve, I even re-install the application again.
    Thanks in advance for the kind help.
    Kind regards,
    Anil Yadav

    Use T.Code VOTXN"
    Choose on Billing document - Header.
    Click on Change button.
    Select your text procedure.
    You can know your procedure by clicking on the tab Text procedure assignment.
    Click on Text ID's in Textprocedure.
    Select your text id.Check the tick mark under "Refer/Duplicate" field.
    And also check your access seqence
    For understanding/reference, kindly refer following SDN thread
    - Text Determination  Procedure  from Sales order to Delivery ,&Billing
    - Re: Copying Text from Sales to Sales Document
    Thanks & Regards
    JP

  • Text messages not copied from sales order to billing

    Text messages which have been given in sales order are not copied to billing. Two of the text are copied and the other two are not getting copied. Checked the access sequence.. everything is correct.
    Please give a clue.

    Dear DV,
    These are basic settings to copy the Text from sales order to Invoice so please check in these areas,
    First you need to copy the sales order text to the delivery document from the delivery document you can copy the text to the billing document.
    To copy the sales order text to the delivery document
    You do the text determination for the deliveries also,define and maintain same TextId in the delivery header text procedure ,maintain the access sequence ,in the delivery text procedure access sequence you put the Text Object as VBBK for that Text ID.
    Make sure that you have assigned access sequence for your missed Text ID's in VOTXN transaction
    To copy the delivery text to the invoice.
    You do the text determination for the billing document,define and maintain same TextId in the billing document text procedure and maintain the access sequence,after that
    Go to VOFA transaction then selct billing document type then go in to the details screen here you do the check in the Delivery Text check Box (Top most bottom of the screen.)
    Now you can able to copy the sales order text to the invoice.
    Use VOTXN transaction for Text determinetion
    I hope this will help you,
    Regards,
    Murali.

  • Sales Office & Sales Group not copying from customer Master

    I have a few values such as Sales district, Sales Office, Sales Group transportation zone etc in Customer Master.
    However, only sales office and sales groups are not copied over to SO upon creation. Does anyone know why?
    Thank you.

    Hi,
    If the sales office & sales group is maintained in the customer master , it should get copied to sales order.
    It seems sales office is not assigned to sales area .Kindly check below config
    1. Sales office assigned to sales area , below is the path
        Enterprise structure --> Assignment --> sales and distribution --->assign sales office to sales area
    2. Sales group assigned to sales office, below is the path
      Enterprise structure --> Assignment --> sales and distribution --->assign sales group  to sales office
    Hope this will help.
    Regards,
    Sanjay

  • Why does text formatting not copy from RH project to RH project?

    In RoboHelp 9, I'm copying text, from one RoboHelp project to another. How come the text formatting is not retained? The indenting is off and the small Roman numerals and small letters are changed to bullets.

    Different CSS files?
    See www.grainge.org for RoboHelp and Authoring tips
    @petergrainge

  • Text is not copying from sales ord to invoice in combined billing scenario

    Hi,
    My client is having a scenario where they are creating a single invoice for 2 sales orders of different sales order types. However, we are facing issue as the header text from the 1st sales order only is getting copied to invoice. The header text of 2nd sales order is not getting copied to invoice.
    The text ids of 1st sales order & 2nd sales order are different and the text prcedure of the invoice is having text ids of both the sales order types.
    Can any one help to resolve this issue?
    Thank you,
    Sheetal

    Hi Shirish,
    Thank you the information. We will enhance the billing user exit and in case of any issues, we will again request your help,
    Thanks,
    Sheetal

  • How to Copy Sales Text Data from Customer Master to Sales Order.

    Hi SAP Guru's
    I have Completed Configuration for Central Text for Customer Master for two texts 1)Additional Attachments 2) Wooden Packing
    I got these two fields in Customer Master.
    I need these data to be copied from  Customer Master to sales order. But i am unable get these two in to sales order.
    Steps which  I have done for Text Determination.
    1) Text Id in for Text Object KNA1
    2)Placed Text Id  in Text Procedure  and assigned   this procedure to Customer Account Group.
    Could you please advice me
    Thanks in Advance.

    Text Control
    In this IMG activity, you define the rules for text determination. You must carry out the following steps:
    Select a text object and define the rules for text determination for this object. Text objects are, for example, the sales texts in the customer master record or the sales document header.
    Define the permitted text types for every text object. If the text types contained in the standard SAP R/3 System are not sufficient, create new ones.
    Define the access sequences. This way, you define how the SAP System should determine the texts for a text type.
    Group the text types together in text determination procedures. The SAP System then proposes the text types from the procedure when you maintain a customer master record or a sales & distribution document. The search for the respective text is carried out using the access sequence which you have stored for each text type in the procedure.
    Allocate the text determination procedures so that a procedure applies to the following criteria in each case:
    account group customer
    sales & distribution document type
    item category

  • Customer Master - Sales text copy to Sales Document Header

    Hello,
    I have properly configured the text types, access sequences, and text procedures to take text from the Customer - Sales & Distribution and copy to the Sales Document Header.  After testing this in my DEV system, everything is working appropriately.
    I have transported these changes to my QA system, all transports went through successfully.  All configuration is now the same between my DEV and QA systems, and the access sequences are recognized in both systems via the TTXERN table.
    All changes were made using transaction VOTXN.
    The problem is that when performing my test in QA, the text is not copied from the Customer Master - Sales Area text to the Sales Document Header text.  When going to the Text Determination Analysis view, it states 111 - Access Sequence does not exist.  When selecting Customizing, it clearly shows that the access sequences do exist.
    Has anyone encountered this issue?  I have checked SAP notes but have not found a proper resolution for this issue.
    Edited by: Andy Slania on Jan 31, 2011 9:30 PM

    Read OSS  Note 1002455 - Errors in texts: Messages VX 201, VX 111, and VX 205 and  Note 1002664 - FAQ: Text determination problems after upgrade.
    Also check OSS Note 581779 - Text determination analysis: Access sequence does not exist.
    One more OSS Note 970153 - Change to Customizing text not transferred to target system may also apply to your scenario.
    Regards,

  • Letter of Credit not copying from Quotation to Sales order

    Hello,
    I have attached a LC to a Quotation. When i am making an order with reference to the Quotation, the LC is not copying from Quotation to the Sales order. Kindly help.
    Regards,
    Shahzad

    Hi,
    Did you want to say that you have maintain some text in quotation and that text is not copying to the sales order some thing like that?
    So I suggest you to check your setting by going to the following Tcodes.
    VOTXN over there you can define the text types.
    And you have to assign you text determination procedure to the order also.
    If you want that text to be copied to the billing also then assign the procedure to the billing doc.
    If you have assigned properly your procedure then it will copy the document.
    Regards
    Raj.

  • Partner roles not getting copied from customer.

    Hi ,
    Partner Roles not getting copied from customer to delivery Document .
    we have created one delivery document from a purchase order and when trying to create billing document from that delivery document it is giving log "payer" and ' Bill to party " not maintained.
    when checked in partner tab in delivery document these partner roles are not present there . so what can be the probable reason . These partner functions are maintained in customer.
    thanks!!!!!!
    which customizing seeting to check for this

    Hello Payal,
    Please go to T.code VOPA i.e. Maintain Partner Determination and select Delivery from the list and then click Partner Procedurers and select the relevant delivery type and double click you will get mandatory Partner Functions like Sold To, ship To, Bill to are ticked or not.
    Reward if useful

  • Address not copied from Sales order/Delivery to Shipment Document

    Hello Experts,
    I need your help on Addrss of ship to in shipment document.
    Sales Order[VA01] >> Delivery [Vl01N]>> Shipment [VT01N].
    User changed the Address of ship to party (Header level) in Sales Order and It reflected to delivery as well and I believe It should also update the address in Shipment document.
    But when I checked the Address of the Customer/Unloading point in Shipment Document [VT03N] (as below) I found It was not updated It was same as Customer Master Record and I believe It directly copied from Customer Master Record.
    BUT While creating the Shipment system is copying the data from Customer master Record not from Sales Order /Delivery. Logically system should copy the updated address from Order/Delivery BUT It is directly copying from Customer Master i don't know where is the setting of this ??
    Can anybody help me on this ? How system takes the customer (ship to party) address in shipment ? Where are the setting of these.
    What I need to do so system take the updated address from Sales Order/Delivery not from Customer Master Record (Ship to party).
    Can I change the address of customer in shipment document ??
    Awaiting your precious reply.
    Thanks,

    Hello Samir,
    Thanks for your response.
    I think you get my question in wrong way.
    I am sayingCustomer master data was not changed.
    User just changed the Address in Order (Order > Header >> Partner tab >> Change ship to address/overwrite ship to address).
    Overwritten Address / Updated address are copying in Delivery BUT not in Shipment document.
    What I need to do?  system should copy the updated address from Sales Order/Delivery BUT it is copying from Ship to party.
    I hope this time i am clear to explain my issue.
    Thanks,

  • Item 000002 is not copied from the reference document

    Dear All,
    I am facing a typical problem while creating Price difference sales order w.r.t. invoice.
    Document types in the system are -
    Z2FC - Normal Sales order type, ZPD - Price change order type, Z2FB - Normal invoice type
    My item category determination is -
    Doc. type -  Itm cat. gp.  -  Usage - Hghr itm cat - Default itm cat. - Manual itm. cat.
    ZPD         -   NORM         -  blank   - blank           -  G2N                  - L2N
    ZPD         -   NORM         -  blank   - G2N            -  G2N                  - L2N
    Z2FC       -   NORM         -  blank   - Blank           - TAN                  - TAP
    Z2FC       -   NORM         -  blank   - TAN            - TANN                - TAN
    Copy control is -
    Z2FB to ZPD for item category TAN with proposed item categories are G2N and L2N.
    Z2FB to ZPD for item category TANN u2013 requirement 302 [Do not copy item]
    During my Z2FC sales order creation I was having line items as follows
    Item no. -  Mat. code     -  Qty -      Higher level item - Item category - Amount
    10         -  101329          -  3     -      blank                 - TAN                - 35,000.00
    20         -  MC091234    -  3     -      10                      - TANN             - 0
    30         -  MC091234    -  1     -      10                      - TAN                - 5000
    We are not using the sales BOM. I need to provide line 20 free to the customer. Hence I have manually maintained 10 in the higher level item column for the line item 20. The item category determined was TAN. Then I had changed it to TANN manually. So the amount became zero. Line 20 became the child and line 10 became parent.
    At the same time customer also wishes to buy the material code MC091234. Now the material code MC091234 is of HALB type where as the material code 101329 is of FERT type. There is validation in the system that only FERT type of material could be sold and HALB type of material could be supplied as free. [With item category TANN]. In case HALB type material is also required to be sold then I need to manually maintained value in the higher level item. So I had maintained the value 10 in the higher level item column for the line item 30. The default item category determined is TAN. The invoice is also created properly. [Z2FB type]
    But when I am creating the invoice correction document type ZPD w.r.t. Z2FB type invoice, I am able to get the two line items for the material code 101329 in line item 10. One each for G2N and L2N item category.
    But for the material code MC091234 in line item 30, I get only one line item with item category G2N. I did not get another line item for the material code MC091234 for the corresponding L2N type item category
    At the same time following messages are displayed
    Message no. V1475 Item category for item 000002 cannot be determined and
    Message no. V1476 Item 000002 is not copied from the reference document
    Please help.
    Thanks in advance
    Piyush Ranpura

    Dear All,
    Any help???
    Yet my issue is unresolved.
    Thanks & Regards
    Piyush Ranpura

  • Variant config - error Material ZZZ is not copied from the bill of material

    Hello guys,
    I try to obtain a material configurable in a new plant.
    I have more errors and I don't know exactly if the problems are in setting of the variant configuration, or if the problems are in customizing.
    When I try to make a Sale Document (Standard Order VA01), the following error occurs:
    Material ZZZ is not copied from the bill of material.
    Message no. V2003
    Diagnosis
    When the bill of material was exploded, it was established that no sales document item could be created for material ZZZ.
    System Response
    The system ignores the material during bill of material explosion.
    Procedure
    Check if the BOM explosion can be used without material ZZ. If not, delete the main item which lead to the BOM explosion. You may be able to enter an item manually in which the material ZZZ in the BOM.
    What do you think it might the solution for this challenge?
    Thanks in advance.

    hello, friend.
    the issue you presented is very broad and requires some more info, such as:
    1.  what are the item category groups of the material and ZZZ?
    2.  did you check item category determination in your sales doc type?
    regards.

Maybe you are looking for