Text vertically cutted

Hello,
we're using Crystal Report XI v2 SP4 on VS2005.
Some users complain that sometimes (randomly) on some reports text is vertically cutted (you see part of the text but you can't figure out what it is written).
This happens with .NET crystal report viewer and also when exporting to PDF from .NET.
We've also tried to update CR to SP6 but it didn't work out either.
Unfortuanetely we can't even reproduce the problem.
Here's an example of what it does happen: http://www.polsoft.it/CrystalBadExport.png
Could you give us some hints?
Thank you,
Ivan

1) As per the [Rules of Engagement|https://www.sdn.sap.com/irj/sdn/wiki?path=/display/home/rulesofEngagement];
do not cross post (Text vertically cutted)
2) This forum is for Legacy SDKs. You are using the CR SDK for .NET. Why would you post in here?
3) If this is a critical issue, you have the option of creating a phone case here:
http://store.businessobjects.com/store/bobjamer/en_US/pd/productID.98078100?resid=S6I@hgoHAkEAAGsiyVkAAAAR&rests=1282226845369
4) Closing and locking this thread.
- Ludek

Similar Messages

How to print text vertically in smart forms

hi,
Can any one tell how to print text vertically in smartforms
ADVANCE THANKS
GUHAPRIYAN

HI,
Chk out this thread.Maybe it proves helpful.
Re: vertical writing in smartforms
Regards,
Gayathri

How to draw text vertically, or in an angle

please help me how to draw text vertically, or in an angle

I robbed the framework from Dr Las or 74phillip (don't remember which) ...
import java.awt.*;
import java.awt.geom.*;
import javax.swing.*;
import javax.swing.event.*;
public class AngleText extends JPanel {
private int      degrees = 16;
private JSpinner degreesSpinner;
public AngleText () {
    setBackground ( Color.WHITE );
} // AngleText constructor
protected void paintComponent ( Graphics _g ) {
    super.paintComponent ( _g );
    Graphics2D g = (Graphics2D)_g;
    g.setRenderingHint ( RenderingHints.KEY_ANTIALIASING, RenderingHints.VALUE_ANTIALIAS_ON );
    AffineTransform at = AffineTransform.getRotateInstance ( Math.toRadians ( degrees ) );
    Font f = g.getFont();
    g.setFont ( f.deriveFont ( at ) );
    g.drawString ( "Rotating Text!", getWidth()/2, getHeight()/2 );
    g.setRenderingHint ( RenderingHints.KEY_ANTIALIASING, RenderingHints.VALUE_ANTIALIAS_OFF );
} // paintComponent
public JPanel getUIPanel () {
    SpinnerModel degreesModel = new SpinnerNumberModel (
                                  degrees // initial
                                 ,0        // min
                                 ,360      // max
                                 ,2        // step
    degreesSpinner = new JSpinner ( degreesModel );
    degreesSpinner.addChangeListener ( new DegreesTracker() );
    JPanel panel = new JPanel();
    panel.add ( degreesSpinner );
    return panel;
} // getUIPanel
// DegreesTracker
private class DegreesTracker implements ChangeListener {
    public void stateChanged ( ChangeEvent e ) {
      Integer i = (Integer)((JSpinner)e.getSource()).getValue();
      degrees   = i.intValue ();
      repaint();
} // DegreesTracker
// main
public static void main ( String[] args ) {
    JFrame f = new JFrame ( "AngleText" );
    f.setDefaultCloseOperation ( JFrame.EXIT_ON_CLOSE );
    AngleText app = new AngleText();
    f.getContentPane().add ( app );
    f.getContentPane().add ( app.getUIPanel(), BorderLayout.SOUTH );
    f.setSize ( 200, 200 );
    f.setVisible ( true );
} // main
} // AngleText

How to justify text vertically in multi-column frame

How do I justify text vertically in a multi-column frame but within the baseline grid?
Working at a very busy publication, fitting text evenly in multi-column text boxes are crucial to be done quickly! I understand that it can be done manually by adjusting the tracking in order to force the text to end evenly on bottom. However I'm looking to achieve that result automatically, pretty much like the "Justify Vertically" feature except by doing so it spreads the last column lines out, but I need to keep the text on the grid.

You can ask over in scripting: InDesign Scripting

How to display TEXT vertically in SMART FORM

Hai,
I need to display the column name of a table vertically (readable from bottom to top) in smart form.
Could any one please tell me how to do this?
Thanks & Best Regards,
Maniyam Bhaskar.

Hi,
Go through these threads for the discussions happened on similar issue... hope it helps you..
how to print text vertically in smart forms
vertical and horizontal printing in same page with smartforms or sapscript
Good luck
Narin

How to align text vertically?

This seems like it should be really easy: On a simple text slide, how do I align multiple lines of text vertically? Do I have to eyeball it, or is there a way to fix it exactly in the center, top to bottom?

Hi -
There is no automatic way, but there is a way to make it slightly easier.
After you enter your text, grab the clip of type and move it to a portion of the timeline where there are no other clips.
In the Canvas click on the button on the top right and select Checkerboard:
!http:/www.spotsbeforeyoureyes.com/CanvasCheckerboardBG.jpg!
This will make the background a checkerboard so you can count the squares to verify the top and bottom line are equidistant from the TV Safe Guidelines:
!http://www.spotsbeforeyoureyes.com/CanvasCheckerBoardExample.jpg!
When you are done positioning the type, grab the clip and place it above the clip you originally wanted it to appear over.
You can either leave the Canvas set to display a checkerboard when there is no video present, or switch it back to Black.
Hope this helps.

How to add text vertically into a Word margin with C# (using namespace: Microsoft.Office.Interop.Word)

I need to add text vertically in a word document outside the margins. How can I do this with Microsoft.Office.Interop.Word and C#?
Leonard Swarczinski Software Developer Postal Center International

Hi Leonard,
According to your description, do you want to add text vertically into Page Header/Footer? I wrote a sample for you.
using Microsoft.Office.Core;
using Microsoft.Office.Interop.Word;
using System;
using System.Collections.Generic;
using System.Linq;
using System.Text;
using System.Threading.Tasks;
namespace AddTextToWord
class Program
static void Main(string[] args)
CreateNewDocument();
Console.ReadLine();
private static void CreateNewDocument()
Object oMissing = System.Reflection.Missing.Value;
Microsoft.Office.Interop.Word.Application oWord;
Microsoft.Office.Interop.Word.Document oDoc;
oWord = new Microsoft.Office.Interop.Word.Application();
oWord.Visible = true;
oDoc = oWord.Documents.Add(ref oMissing, ref oMissing, ref oMissing, ref oMissing);
String HeaderText = "Hello everyone!";
WdParagraphAlignment wdAlign = WdParagraphAlignment.wdAlignParagraphCenter;
AddHeader1(oWord, HeaderText, wdAlign);
private static void AddHeader1(Application WordApp, string HeaderText, WdParagraphAlignment wdAlign)
Object oMissing = System.Reflection.Missing.Value;
WordApp.ActiveWindow.View.Type = WdViewType.wdOutlineView;
WordApp.ActiveWindow.View.SeekView = WdSeekView.wdSeekPrimaryHeader;
Microsoft.Office.Interop.Word.Shape textBox = WordApp.ActiveDocument.Shapes.AddTextbox(MsoTextOrientation.msoTextOrientationVertical, 150, 10, 40, 40);
textBox.TextFrame.TextRange.Text = HeaderText;
WordApp.ActiveWindow.View.SeekView = WdSeekView.wdSeekMainDocument;
If I misunderstood or anything wrong, please let me know and you can get more information from below articles.
Office development in Visual Studio
http://msdn.microsoft.com/en-us/office/hh133430.aspx
Abhout: AddTextbox Method
http://msdn.microsoft.com/en-us/library/office/aa171543(v=office.11).aspx
How to: Programmatically Insert Text into Word Documents
http://msdn.microsoft.com/en-us/library/vstudio/6b9478cs.aspx

Pie Chart -- legend texts are cut (with "...")

Hello Experts,
when I*m using pie charts with displaying the legend, longer texts are cut (e.g.: "220/35V 60W yellow...")
What can I do to show the complete text?
Thanx a lot
KR,
Raimund

Good Day Nics,
the cuts are due to the size of the pie chart. you can resize your pie chart for the legends to show properly.
Kindly tell me if im missing something.
Regards,
John Vincent

Center text vertically in DIV.

I need to center the text vertically in the div at the bottom
of this page. How do I accomplish this? I searched this forum, but
couldn't find anything on it.
http://www.liquidfirefishing.com/ocmc

It does not. It's specific to table cells, or things with the
table-cell
display style.
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
==================
"kiusau" <[email protected]> wrote in
message
news:gnesja$osr$[email protected]..
>
quote:
I need to center the text vertically in the div at the bottom
of this
> page.
> How do I accomplish this?
>
> Create a single cell table inside the <div> tag
and apply vertical
> alignment
> to the <tr> tag. I do not know, if vertical
alignment works with the <p>
> tag.
>
> Roddy
>

Center text vertically in 6i

I was wondering if there was a way to center text vertically in a text field in forms 6i.
I have a banner at the top of my form as a text item, and I need the value(s) to be centered horizontally(which I have already done) and vertically which I am wondering how to do. Could someone please tell me how?
TIA
C

It does not. It's specific to table cells, or things with the
table-cell
display style.
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
==================
"kiusau" <[email protected]> wrote in
message
news:gnesja$osr$[email protected]..
>
quote:
I need to center the text vertically in the div at the bottom
of this
> page.
> How do I accomplish this?
>
> Create a single cell table inside the <div> tag
and apply vertical
> alignment
> to the <tr> tag. I do not know, if vertical
alignment works with the <p>
> tag.
>
> Roddy
>

Writing text vertically and drawing dashed line

Hello,
I m trying to write text vertically ( basically to write data on the y-axis of a graph)..Is there a way in which i can set the line direction properties to VERTICAL..?
Also, i m trying to draw a dashed line.Can anyone tell me how to do this?
Thnx in advance....

Try looking [url http://www.macdevcenter.com/pub/a/mac/2002/03/22/vertical_text.html]here.
: jay

Text getting cut off when printing to PDF from Excel

Hello,
     I've seen a lot related to this subject but nothing that shows a real solution.
     Using Excel 2003-sp3 and Adobe Acrobat v.9 Standard, the right half of the last character in the string gets cut off. It prints from excel fine.
     It's not always the text that is the right-most on the page either. An affected PDF file is attached - note the cut off "S" on the last line (NET ASSETS OF GOVERNMENTAL ACTIVITIES).
     Any assistance is appreciated.
Thanks,
Kevin Murphy

please delete me from your mailing list. tks.
Date: Wed, 10 Feb 2010 11:20:28 -0700
From: [email protected]
To: [email protected]
Subject: Text getting cut off when printing to PDF from Excel
Hello,
     I've seen a lot related to this subject but nothing that shows a real solution.
     Using Excel 2003-sp3 and Adobe Acrobat v.9 Standard, the right half of the last character in the string gets cut off. It prints from excel fine.
     It's not always the text that is the right-most on the page either. An affected PDF file is attached - note the cut off "S" on the last line (NET ASSETS OF GOVERNMENTAL ACTIVITIES).
     Any assistance is appreciated.
Thanks,
Kevin Murphy
>

How do I make text vertical in a table

How do I make text vertical within a table using pages '09?

You need to type the text in a Textbox, turn off text wrap, rotate that 90° using the Metric Inspector then position it over the cells you want the text vertical.
Peter

Text is cut off or disappear in large images

Issue
Text is cut off or does not appear on a type layer in large images (e.g.,
400 MB) in Adobe Photoshop 5.x>.
Solutions:
Do one of the following:
Solution 1
Change anti-aliasing in the type layer:
1 Double-click the type layer.
2. In Photoshop 5.5>, select None, Crisp, or Strong from the Anti-Alias
pop-up menu in the Type Tool dialog box. In Photoshop 5.0.2, deselect
Anti-Aliased in the Type Tool dialog box.
3. Click OK.
Solution 2
Move the type layer, open the Type Tool dialog box, click OK, and then move
the layer back:
1. Select the move tool.
2. Move the type layer to the left until all the text is off the image.
3. Double-click the type layer.
4. Click OK in the Type Tool dialog box.
5. Move the type layer back with the move tool. Do not move it back using
the History palette.
Solution 3
Create the text using the type mask tool and fill the selection:
1. Select the type mask tool and click in your image.
2. Enter your text in the Type Tool dialog box. Click OK.
3. Move the type selection to the desired location. If you can see part of
the text on the existing type layer, you can use it as a guide to position
the type selection.
4. Select the layer on which you want the text to appear.
5. Select a foreground color for the type.
6. Choose Edit > Fill.
7. Chose Select > Deselect.
8. Remove the original type layer.
Solution 4
Create the text in Photoshop 5.0 or earlier, or in another application.
Then, import the text into Photoshop 5.x and remove the original type layer.
Additional Information
The type tool cannot create anti-aliased text larger than 8192 pixels on the
image canvas in Photoshop 5.x, although it can in earlier versions. The type
mask tool, however, can create selections that exceed this limit. You can
fill type mask selections to create pixels in the shape of type, but these
pixels are not editable in the Type Tool dialog box and do not appear on a
new Type layer.
(Adobe Tech doc # )

It has something to do with Segoe fonts in your Windows system.
Refer to this link from itunesTRK for solution on windows 7:
https://discussions.apple.com/thread/3782135

Aligning text vertically

I know how to center text horizontally within the text box in CS5 Extended (just click the same "center" icon you would click if you were using Microsoft Word or any other program), but how can I center it vertically (have it placed equidistant from the top and bottom of the text box)? I know there must be a way.
Thanks!

I think the question has to do with text arranged vertically, rather than text that is centered on a vertical line dividing the cell.
The example in column A is available in cells in Pages Tables. But of a kludge, though, as its achieved by inserting a return (option-return if you're typing it in the cell) after each character in the string.
The example in column B is made by entering the text into a text box, then rotating the box using the Metrics Inspector, aand placing it in front of the cell where it is to appear.
The example in column C has been horizontally centered in the cell using the alignment button on the format bar. There is also an alignment button in that bar to center the text vertically in the cell, but I hadn't used it before capturing the screen shot. This text also has an option return inserted after each of the first two words.
Regards,
Barry

Text vertically cutted

Similar Messages

Maybe you are looking for