TextPad - command for disabling limit

Hi, I want to print the number of bottles in the range of 99 to 0 like the one below. However, when I attempted to run Java from TextPad, the output shows only 74 to 0, instead of 99 to 0, which I was supposed to be getting it. This led me to assume that there is a restriction imposed by TextPad on the number of text characters display in the command prompt window. In fact, I had the same problem with BlueJ, but that was solved when I went to Options menu and selected "Unlimited Buffering". Is there a similar command that release the limit and print all numbers from 99 to 0 in TextPad? I appreciate it if you could point me in the right direction. Thanks.
Note that I already posted my similar question in TextPad's forum last month ago, but I haven't received any response from them yet. I figured I would get a better response in here given that there is a number of TextPad users who frequent this forum.
Ninety-nine bottles of beer on the wall,
Ninety-nine bottles of beer,
Take one down,
Ninety-eight bottles of beer on the wall,
One bottle of beer on the wall,
One bottle of beer,
Take one down,
Zero bottles of beer on the wall,
Edited by: CyberCobra on Dec 22, 2008 9:02 PM
Edited by: CyberCobra on Dec 22, 2008 9:02 PM

CyberCobra wrote:
The only exception is that the latter of your suggestion should be the other way around (i.e. check "capture output" and disallow the command prompt to pop up.)oh wait, were you talking about the command prompt all along?
Click on the command prompt C:\ icon in the top-left -> Properties -> Layout -> Screen Buffer ->
enter width + height -> OK -> select "change for all windows with same name"
Anyway, thanks for your help. It's a shame that the others at TextPad's forum didn't bother to respond my month-old post. ive posted there twice and got good responses.
Had they responded and gave me the answer that I'm looking for, I would gladly purchase their product, but now unfortunately for them, they just lost me as another potential customer and deservedly so.dont buy it. its a ripoff. youll grow out of it real quick and realize you should be using eclipse or something.
Edited by: TuringPest on Dec 22, 2008 9:42 PM

Similar Messages

UNIX command for disabling Firewall in Leopard?

I'd like to use ARD to send a unix command to all my Macs running Leopard that will set the OS's application firewall to "allow all incoming connections." I believe that's the default setting, but I've run into some machines that are setting specific access - not sure how, don't really care, just want to turn it off.
I've been reading up on /usr/libexec/ApplicationFirewall/socketfilterfw but the Help seems incomplete and I'm not sure this will accomplish what I'm after.

defaults write /Library/Preferences/com.apple.sharing.firewall state -boolean No
followed by a reboot works like a charm. thanks for you help.

Smart HDD command for disabling AAC

Hi all,
I change my internal HDD on my mac mini.
I intall Leopard on it .
I found on the HDD manufacturer web site that the mode AAC (Automatic Acoustic Management) in the smart HDD items needs to be disabled.
I know how to find the smart HDD status value ( in System profiler ), but I would like to know if a application exists to set or unset a smart value on a HDD under Leopard .
It seems that the HDD firmware is delivered with the AAC value set to QUIET.
Thank in advance for your help
ben

Yes the manufacturer give a DOS tool that can be booted from Floppy or CDROM . The problem is that my minimac doesn't boot the CDROM .
I don't know how to boot this CDROM on my mac mini .
Do you have an idea ?

Wanted: shell command for disabling shutdowns

Hi @ all,
I'm administering a little workgroup. Unfortunately most of them shut down their machines before going home.
I found a way diabling the shutdown possibility (click on shutdown button doesnt invoke anything) by using Onyx.
But I would like to diable this functions for all users without the need of installing Onyx on each and every machine.
I'm certain that there must be a shell command, but I just wasnt able to google it up.
Thanks for any help in advance
joh

Consider this link: http://bit.ly/bPiNDF
Granted, it's for 10.5, but it should remain viable. I shouldn't need to remind you to test this on a non-production system first =)
Just remember that even if you DO manage to make it very difficult for users to shutdown the system, users are very persistent, and you may soon find machines that are shutdown via the cord being pulled from the wall.
It may be better to issue a policy that states that shutting down their machine is "wrong" or something to that effect.
/A\V/
Message was edited by: Deviros Fixed typo

Questions on Commands for planning application

Hi,
1. Where can i get the information on commands for planning functions?
2. What is the difference between
---Execute planning function simple and -
Execute planning function
3. I create planning layout with few buttons
a. Copy: I clicked on the copy button and can see the data in the layout
b. Save: Clicked on the save icon, Data saved into the planning cube
c. Change. : clicked on the change and changed few values and then clicked on SAVE button. Data got saved into my planning cube.
Now I my requirement is when user open the planning layout, It should only be in display mode. But currently automatically all the keyfigures are in change mode (Is it because in query designer, I checked "Start query in the change mode?)
When user opens the planning layout, he should run the copy function, then should save the data into the planning cube and then should be allowed to chagne. Change button should be in active until data is saved into the plannigng cube. IS this possible?
Thanks
Annie

Hi Deepthi,
Thanks for your reply.
I did as you mentioned and its working as expected.
User wants something like this
1. Execute the planning layout.
2. Click on the copy function
3. Save the data
4. Click on the change button so that data can be changed now.
As per your solution, without have change button its working perfectly. But now i want to have change button on the layout. Initially change button should be disabled. When i save the data then it should get active.
I did the following things but didnt work
1. Save button i have two commands
a. Save data
b. Set_item_parameters
2. Change button> disable>set_data_entry_mode.
After executing the layout. I could copy the data and save it. BUT after saving it change button is not getting active.
I think i did do something in save button (B). I just mentioned button group but didnt mention the change button. Can you please help me?
Thanks
Annie

For disable any responsibility we are end date that from front end.

for disable any responsibility we are end date that from front end. what nay command from backend for disable the responsibilty.?

Refer the following thread
delete a responsability
Re: delete a responsability
Regards
-Mahesh

Disable Inbox Rules for Disable Users

I have found that when our helpdesk disables an AD user account (terminated employee) that has an Outlook inbox rule to forward the email to an email address outside the organization, emails sent to the former employee are still forwarded to that outside
email address. I would like to run a script each day that queries AD for all disabled accounts, removes any forwarding SMTP adresses, then removes all mailbox inbox rules. I have been trying to use get-aduser against a DC and export the list of
disabled users, this works fine. I then take that csv, import it and use -foreach-object to set the forwarding smtp address to null. I would then like to use the same csv file to run the -removeinbox rule command against the list. I am having
a hard time time combining the commands I need into a PS script that works against both AD and Exchange.
Anyone have some powershell kung fu to assist me? Thank you!
~Eric

Hi Eric,
According to your description, I understand that you want a script to get a list of disabled AD user, then removes any forwarding SMTP addresses, then removes all mailbox inbox rules.
We can run following command to get a list of disabled AD user in PowerShell:
Get-ADUser -Filter 'Enabled -eq "false"' | select name,userprincipalname
More details about “How Can I Get a List of All the Disabled User Accounts in Active Directory? “, for your reference:
http://blogs.technet.com/b/heyscriptingguy/archive/2005/05/12/how-can-i-get-a-list-of-all-the-disabled-user-accounts-in-active-directory.aspx
Also, run below command to disable forwarding SMTP address and inbox rule:
Get-Mailbox -Identity xxxx | Set-Mailbox -DeliverToMailboxAndForward $false
Get-InboxRule –Mailbox xxxx | remove-InboxRule
However, we recommend use this disable AD user to disable mailbox.
By the way, this question will related to the script of Exchange server, please contact relevant team so that you can get more professional suggestions. For your convenience:
http://technet.microsoft.com/en-us/scriptcenter/dd742246.aspx
Best Regards,
Allen Wang

Enable aaa accounting commands for all privilege levels?

Here is the command's syntax:
aaa accounting {auth-proxy | system | network | exec | connection | commands level} {default | list-name} {start-stop | stop-only | none} [broadcast] group groupname
The "command" accounting type must include the privilege level of the commands you are logging. How do I log ALL commands?
Take the following example:
aaa accounting commands 15 default start-stop group mygroup
If I issue this command will that mean commands the user executes that have a privilege level lower than 15 will not be logged? Or only commands that require exactly privilege level 15 will be logged?
How can I log all commands regardless of privilege level?

Hi Red,
If you customize the command privilege level using the privilege command, you can limit which commands the appliance accounts for by specifying a minimum privilege level. The security appliance does not account for commands that are below the minimum privilege level.
The default privilege level is 0. So if you don't specify any privilege level then all should be accounted for.
You can find the command detail at. This is for ASA though.
http://www.cisco.com/c/en/us/td/docs/security/asa/asa80/command/reference/cmd_ref/a1.html#wp1535253
Regards,
Kanwal
Note: Please mark answers if they are helpful.

Is possible to give a 5V input to the umi 7764 connector blick for the limit switch inputs

I am using a umi7764 connector block for my 7344 controller. My motion control hardware provides me a 5V output in case the limit switches are enabled. But the umi 7764 connector block connections for the limit swithces are in such a way that it doesnt get any input, instead it has to be directly connected to the limit switches.Is there any way to come around this problem so that the limit switch inputs read the 5v given out by my motion control appplcation

If your drive has individual outputs for the forward, reverse, and home switches, then you could connect these to the their respective terminals on the UMI. You will need to either disable limit functionality on one component (controller or drive) or make sure the limit behavior for the devices does not conflict with each other. It probably is best if the controller handles the limits, but this will depend on your application.
If the drive only has one output to indicate that one of the switches has been activated, then you have fewer options. In this case, you should probably just use the limit protection on the drive and poll that single output with another input on the UMI.
Regards,
Brent R.
Applications Engineer
National Instruments

Facing Problem while updating SAP Note for ESI Limit

Hello,
While Updating ESI Note 0001465628, Step 4 i.e Enable the feild in the cluster 'ESI'. When ABAP'er execute a report RPUGDF00 through SE38 he is getting "Internal Table" radio button option instead of payroll.
If he enters "Internal Table" feild but he is not getting "f" substep feilds in step 4.
Can anybody please guide me to update this note.
Edited by: sunitaos on May 28, 2010 2:43 PM

HI,
Just go thru the list of following notes related to ESI.
Note No     Description     Date
1465628     ESI Limit increased and length of temp. ESI no increased     12.05.2010
1441625     Length of ESI number is change     29.03.2010
1415952     Change in ESI Eligibility limit for physically disabled Ees     20.02.2010
1432975     Length of ESI No     15.02.2010
1425068     ESI FORM 5:Addition of Dispensary information     29.01.2010
1347850     ESI Reporting-Inconsistent in case of org. reassignment     10.01.2010
1403619     ESI Form 5 - Sorting based on ESI Insurance number     30.11.2009
1410113     ESI limit for Disabled Ees     24.11.2009
1409580     ESI Form 5: Add Dispensary Information     20.11.2009
1401519     ESI Retro Treatment     29.10.2009
1392870     ESI Form5:Allignment of the text inconsistent for PDF layout     12.10.2009
1383672     HINCALC0: For split in IT27 after termination, payroll dumps     09.09.2009
1348534     ESI: /3E1 and /3E2 are inconsistent in case of retro run     18.06.2009
1344386     ESI Treatment in case income recieved during inactivity     31.05.2009
1327118     Form 16 - Export data from Temse to PCL4 for previous years     13.04.2009
1290863     Error while generation of Form 6 in ESI report     18.03.2009
1247107     ESI Form 5 - New Layout     06.11.2008
1244296     ESI Form 5 - New Layout     22.08.2008
506128     Legacy data transfer     25.06.2008
1177470     ESI New Form6- Total is missing in worksheet     17.06.2008
1172216     ESI Form 6 - Remarks is missing in PDF Layout     27.05.2008
1164880     ESI Form-6 & Form7-Inconsistent in case of splits in IT0001     23.05.2008
1140970     New ESI Form Layout     23.05.2008
1071281     PY-IN: Master Note for FY 2007-08 (Developments)     02.01.2008
1117371     Double deduction in ESI for employee during retro     26.11.2007
1099052     ESI Form 7 throws error when printing     05.10.2007
1071945     ESI Monthly Eligibility report progarm     05.07.2007
1069980     Executing report program HINCESI0 for multiple payroll areas     29.06.2007
1048358     ESI form 6: Effect of IT0001 split     20.04.2007
1032446     Enabling correction offcycle payroll run     02.04.2007
Thanks & Regards,
Param

Sun IdM 7.1 - 'Is Disabled' shows 'No' for disabled user in configurator UI

Hi All,
I have user1 in SIM who has been disabled on RACF through SIM.
But, when I open this user obejct in SIM, logged in as configurator, the 'Is Disabled' column for the RACF resource shows 'No', when it should be showing 'Yes'.
I've checked user1 on RACF and user1 has been disabled there.
Below is the code which I've used to disable the user on RACF:
             <set>
                <concat>
                  <s>view.update.accounts[</s>
                  <ref>appname</ref>
                  <s>].selected</s>
                </concat>
               <s>true</s>
            </set>
          <set>
            <concat>
              <s>view.waveset.accounts[</s>
              <ref>appname</ref>
              <s>].disabled</s>
            </concat>
            <s>true</s>
          </set>
          <set>
            <concat>
              <s>view.accounts[</s>
              <ref>appname</ref>
              <s>].disabled</s>
            </concat>
            <s>true</s>
          </set>
            <set>
            <concat>
              <s>view.accounts[</s>
              <ref>appname</ref>
              <s>].disable</s>
            </concat>
            <s>true</s>
          </set>(In the above code, the 'appname' variable will contain the value as 'RACF' at run-time).
I've tried various other things, but still the 'Is Disabled' column shows 'No' only.
Also, apart from the above code, I'm also using resource action which actually runs the RACF command to disable the user on RACF.
FYI - I'm using Sun Identity Manager 7.1
Any help on this would be greatly appreciated.
Thanks in advance!

Check if you have customized
'Default RACF ListUser AttrParse', if so it should have the attribute
*<multiLine>*
*<t> ATTRIBUTES=</t>*
*<str name='ATTRIBUTES' multi='true' delim=' ' noval='NONE'/>*
*<skipToEol/>*
Reason:
Since this is the attribute reference in the method isDisabled() in your com.waveset.adapter.RACFResourceAdapter.
Thanks

Instructions for disabling Mail.app

The problem: Notification Center seems to send a command to Mail.app to open when I receive a calendar alert.
Simple Concept: I don't want Notification Center to open Mail.app!! I want Notification Center to give me notifications!! (What a novel concept!)
I have been unable to get Mountain Lion to not open Mail.app when I receive a calendar notification.
So ultimately I want the Notification Center in Mountain Lion not to tell Mail.app to open for a given calendar event, when I've already gotten the emailed notification in Sparrow! Alas, this simple request seems to be impossible, according to the infrastructure built into OS X 10.8.2 (Mountain Lion).
Technical details:
These are notifications from Google Calendar, which I use very regularly. Turning off the emailed alerts from Google Calendar is not a solution!!! More on this below.*
I use Sparrow as my mail client. IMHO, Gmail (Sparrow) >>>> Mail.app. [For those of you non-geek readers, that ">>>>" means "is much much much better than".] Sparrow is selected as the default mail client in Mail.app settings.
I am terminal-savvy; I don't mind disabling things at the system level and am capable with Unix commands. I haven't even been able to find a terminal command to disable Mail.app - because I don't want to use it at all, and would prefer to just disable it on my account.
If I tell ML to ignore alerts, then I won't get the alerts in notification center when I am in front of my mac.** (Duh)
More info below:
*I want Google Calendar to send me email alerts, because I don't sit at my mac all day long. I have to work on a Micro$oft piece of trash all day long. So I want to get an email reminder at that POS while logged into my gmail that I have a calendar appointment. So disabling the email reminders in Google Calendar is NOT a solution. (!!!!!!!!!!!)
**I want Notification Center to tell me that I have a calendar event. I don't stay logged into gmail on the browser at home on my personal computer, I have my mail client and calendar clients to do the work that would normally take up two browser windows, and what's the point of notifications if they aren't being used??!?

The Health dashboard suddenly becoming blank is due to a bug in 8.0.2 Health App.
Many people have found success in getting the data display back by turning the phone off / on again, however the problem will return eventually.
I have had this issue occur several times already. I have found that when this problem occurs, it can be ignored as MyFitnessPal is still collecting data.
The next day when I open Health, in my experience, the dashboard is empty but all of the data (charts, etc) is there. I just have to re-select my dashboard items.
I'm hoping 8.1 will resolve a lot of these nagging bugs in iOS 8.

Speakable Items - Back command for browser

Apple speakable commands are fairly useful and can be used to open browser windows within Safari.
Is there a way to issue a speakable command to go back to a previous page?
Thank you.
20 iMac G5 Mac OS X (10.4.2)

You can speak "Define keyboard command" from any application, and in the editor, can limit that command to a particular application. This allows you to add speakable commands for standard items such as:
"Move Back" (Cmd + Left Arrow)
"Move Forward" (Cmd + Right Arrow)
The "Make this Page Speakable" command is an Apple Script that will be harder to port to Firefox, but I have a workaround that may suffice for you.
I assume you only have a certain number of links (5 or 10?) that you wish to make speakable. If you create them all in Safari using the standard command, it will add web links to the Safari speakable items directory:
~/Library/Speech/Speakable\ Items/Application\ Speakable\ Items/Safari
Copy all of those web links into your Firefox speakable items directory:
~/Library/Speech/Speakable\ Items/Application\ Speakable\ Items/firefox-bin
Then those speakable pages should work from Firefox. Note: You'll need to redo this step anytime you create a new speakable page, so I recommend doing it all at once.

UNIX Commands to disable Expose and Dashboard

Teacher looking to block/disable Expose and Dashboard on iMac 2.2 gHz running 10.6.1
I use ARD 3.2 and want to use a UNIX command to disable features on the students computers. If you know other Commands, maintenance scripts, permissions, etc..those would be helpful as well.
Thanks for your time and help.
David

Hi David
To disable Dashboard:
defaults write com.apple.dashboard mcx-disabled -boolean YES
You have to restart the Dock afterwards:
killall Dock
You still have to tear Dashboard off the Dock although you could amend the com.apple.dock.plist If you wanted to? Amend the persistent-apps tile data settings. To re-enable Dashboard at a future date:
defaults write com.apple.dashboard mcx-disabled -boolean NO
Restart the Dock again with the same command.
Not sure if there is a command to disable Expose? I think some of its settings can be found in com.apple.systempreferences.plist? If it looks like it has what you want you should be able copy it either using the Copy feature in ARD or sending a Unix command like cp (man cp) instead.
Alternatively apply the plist to an OD Group as a managed preference assuming you've an OD environment?
Tony

System prerences won't save keyboard commands for dashboard or desktop

I clicked the checkboxes to turn on the keyboard commands for Dashboard and Desktop. I used control-up arrow for Dashboard, and control-down arrow for Desktop. When I restart, the commands don't work. I thought maybe I had made System Preferences crash, so I made a point of quitting right after making the change. When I restarted, the commands were disabled again. This has happened several times.
What gives?

At a guess, I would think this error code has to do with the video artifacts you are experiencing. You might try reseating all the cables to the display. If the position of the screen makes a difference, there may be damage to a cable, particularly where it goes through the hinge.
Apple is the keeper of the error codes. If you have access to an Apple Store, you could probably ask about this.
Don't know about the other intermittent problems. Does an external keyboard work? If so, there's likely a problem with the internal, maybe even again, a cable or connection.
You could also try creating a new use account and see if the keyboard and mouse problems persist. If not, there could be some sort of software corruption in your usual account. Ditto with the freezing.
Good luck!

TextPad - command for disabling limit

Similar Messages

Maybe you are looking for