The answer in formula cells gets combined with the previous answer making it unreadable.

The problem is when I change a number that is associated with a formula, instead of the new number computing a new answer in the formula cell, it combines with the old answer, producing a overlapping, unreadable answer.

Hi sadcase,
What sometimes happens is that a table gets duplicated and it sits right on top of the original. It goes unnoticed until you change something in the top table- then you see the overlap.
Tap on the table and then drag the bullseye away. You should see the two tables clearly. I would assume that the top table is the most recent but you may need to fix links from any report tables that link to the old one.
hope this helps,
quinn

Similar Messages

TS3276 I sent out a mass mailing to my various groups and the Yahoo accounts have been getting bombarded with the same message every 2 minutes and I don't know haow to stop the hemmoraging. Non of my other contacts had this problem. Please help!

I sent out a mass mailing to my various groups and the Yahoo accounts have been getting bombarded with the same message every 2 minutes and I don't know haow to stop the hemmoraging. Non of my other contacts had this problem, just Yahoo. Can someone help me get out of this nightmare?

I sent out a mass mailing to my various groups and the Yahoo accounts have been getting bombarded with the same message every 2 minutes and I don't know haow to stop the hemmoraging. Non of my other contacts had this problem, just Yahoo. Can someone help me get out of this nightmare?

[svn] 4706: When handling the damageEvent make sure _contents gets updated with the potentially modified contents of the textFlow .

Revision: 4706
Author: [email protected]
Date: 2009-01-28 07:58:30 -0800 (Wed, 28 Jan 2009)
Log Message:
When handling the damageEvent make sure _contents gets updated with the potentially modified contents of the textFlow. Either the contents or the style of the text flow, or both could have triggered the damage event.
QE Notes:
Doc Notes:
Bugs: SDK-18749
Reviewers: Gordon
Ticket Links:
http://bugs.adobe.com/jira/browse/SDK-18749
Modified Paths:
flex/sdk/trunk/frameworks/projects/flex4/src/mx/graphics/TextGraphic.as

Remember that Arch Arm is a different distribution, but we try to bend the rules and provide limited support for them. This may or may not be unique to Arch Arm, so you might try asking on their forums as well.

Is the S9e/S10e 6-cell battery compatibile with the S9/S10?

and if it is, why doesn't it say so?

Hi and welcome.. default charging time < 3 hours ...
I would say ...call your local service ...
sincerely KalvinKlein
Thinkies 2x X200s/X301 8GB 256GB SSD @ Win 7 64
Ideas Centre A520 ,Yoga 2 256GB SSD,Yoga 2 tablet @ Win 8.1

Can Oracle be forced to use the spatial index for sdo_filter in combination with an or clause? Difference between Enterprise and SE?

We’re seeing the following issue: sql - Can Oracle be forced to use the spatial index for sdo_filter in combination with an or clause? - Stack Overflow (posted by a colleague of mine) and are curious to know if this behaviour is due to a difference between standard and enterprise, or could we doing something else wrong in our DB config.?
We have also reproduced the issue on the following stacks:
Oracle SE One 11.2.0.3 (with Spatial enabled)
Redhat Linux 2.6.32-358.6.2.el6.x86_64 #1 SMP Thu May 16 20:59:36 UTC 2013 x86_64 x86_64 x86_64 GNU/Linux
11.2.0.3.0 Standard Edition and 11.2.0.4.0 Standard Edition (both with Spatial enabled)
Microsoft Windows Server 2003R2 Standard x64 Edition
However, the SQL works fine if we try it on Oracle 11.2.0.3.0 *Enterprise* Edition.
Any help or advice would be much appreciated.
Kindest Regards,
Kevin

In my experience sdo_filter ALWAYS uses the spatial index, so that's not the problem. Since you did not provide the explain plans, we can't say for sure but I think yhu is right: Standard Edition can't use the bitmap operations, and thus it'll take longer to combine the results of the two queries (because the optimizer will surely split this OR up in two parts, then combine them).
BTW: when asking questions about queries here, it would be nice if you posted the queries here as well, so that we do not have to check another website in order to see what you are doing. Plus it will probably get you more answers, because not everyone can be bothered to click on that link. It would also have been nice if you had posted your own answer on the other post here as well, because my recommendation would have been to use union all - but since you already found that out for yourself my recommendation would have been a little late.

After hibernation, when trying to login to MacBook Air, it does not accept my password. I have to shut off and then get prompted with the following: Mac OS X wants to use the "login" keychain. I put in the password there and it works. any suggestions?

after hibernation, when trying to login to MacBook Air, it does not accept my password. I have to shut off and then get prompted with the following: Mac OS X wants to use the "login" keychain. I put in the password there and it works. any suggestions?

Back up all data.
Launch the Keychain Access application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Keychain Access in the icon grid.
Select the login keychain from the list on the left side of the Keychain Access window. If your default keychain has a different name, select that.
If the lock icon in the top left corner of the window shows that the keychain is locked, click to unlock it. You'll be prompted for the keychain password, which is the same as your login password, unless you've changed it.
Right-click or control-click the login entry in the list. From the menu that pops up, select Change Settings for Keychain "login". In the sheet that opens, uncheck both boxes, if not already unchecked.
From the menu bar, select
Keychain Access ▹ Preferences ▹ First Aid
If the box marked Keep login keychain unlocked is not checked, check it.
Select
Keychain Access ▹ Keychain First Aid
from the menu bar and repair the keychain. Quit Keychain Access.

I am having difficulty: we are running a windows server 2003 - mail and outlook support 2007 and upwards, how do I get the brand new apple machines to work with the 2003 version of server

I am having difficulty: we are running a windows server 2003 - mail and outlook support 2007 and upwards, how do I get the brand new apple machines to work with the 2003 version of server

I may be way out, but do you know about this product, would it help integrate the Macs for you.
https://www.thursby.com/sites/default/files/images/ADmitMacv8_SPD.pdf

I recently upgraded to Yosemite. Yesterday when I opened up the iPhoto (which I have it in my external drive due to the size of file) I get the message that it is not compatible with the new system(or something like that) and ask me to upgrade so I d

I recently upgraded to Yosemite. Yesterday when I opened up the iPhoto (which I have it in my external drive due to the size of file) I get the message that it is not compatible with the new system(or something like that) and ask me to upgrade so I did. Then another message pops ups and asked for rebuilding the Thumbnails. So I clicked rebuild. Next it asked me to do one of three things(I can't remember all of them) so I chose the last one which is to download a photo to iPhoto. Now I only have that photo I downloaded in iPhoto file but not the rest of my pictures. The iPhoto library which is stored in my EHD shows it has 349GB but it only show one thumbnail of the last picture I downloaded after the rebuild process. What can I do to recover the rest of the file?
Thanks for your help.
George Kyaw
<Email Edited by Host>

I recently upgraded to Yosemite. Yesterday when I opened up the iPhoto (which I have it in my external drive due to the size of file) I get the message that it is not compatible with the new system(or something like that) and ask me to upgrade so I did. Then another message pops ups and asked for rebuilding the Thumbnails. So I clicked rebuild. Next it asked me to do one of three things(I can't remember all of them) so I chose the last one which is to download a photo to iPhoto. Now I only have that photo I downloaded in iPhoto file but not the rest of my pictures. The iPhoto library which is stored in my EHD shows it has 349GB but it only show one thumbnail of the last picture I downloaded after the rebuild process. What can I do to recover the rest of the file?
Thanks for your help.
George Kyaw
<Email Edited by Host>

Unable to sync or backup my iPad2 with the new iTunes. I keep getting the error ""iTunes could not back up the iPad because the backup was corrupt or not compatible with the iPad.". I've deleted all the old backups but still get this.

I'm totally frustrated by iTunes and don't know how to solve my problem. Like a lot of people on here I'm not able to sync or back up my iPad2 with my iTunes (version 10.4.1.10). I'm running Win 7 Ultimate 64 bit. My iTunes worked just fine until the 10.4.xx updates came out and since June I've not been able to back up or sync the iPad2.
When I connect and try to sync I get the error message, “iTunes could not back up the iPad because the backup was corrupt or not compatible with the iPad.”
I've deleted all the old backups so there are none on my system. I've deleted iTunes and re-installed the 64bit version several times but it has not made any difference. I've read and followed several suggestions on these boards about how to remove and reinstall everything but none have worked yet. I'm stumped here.

I had the exact same thing with my shuffle - same error message saying that it was corrupt so I restored it (wiping everything in the process) and the same message came up as soon as it reloaded. Thank god I didn't try it with my iPod or iPhone first. So many issues with this new version of iTunes!!!!!!!!

Getting Started with the BlackBerry Classic

Reposted from the Inside BlackBerry Help Blog
Whether you are new or experienced with BlackBerry 10, here’s a quick guide to get you started with the BlackBerry Classic!
Step 1 – Insert your SIM and media card
The first step you’ll want to take after unboxing your new BlackBerry Classic is inserting your nano SIM card and media card. When you have your nano SIM and media card (optional) handy, use the tool that is provided in the BlackBerry Classic box to open the SIM card tray.
To do this, push the tip of the tool, or a paperclip, into the hole that is to the left of SIM on the side of your device. Doing so pops the tray out at which point you can pull it all the way out.
After doing this, with the metal contacts of your nano SIM card facing away from you, place the nano SIM into the tray, then push the tray into the slot. Repeat these steps to insert your media card by inserting the tool, or a paperclip, in the hole to the right of SD along the left side of your device.
Tip: If you don’t have the right SIM card please contact your service provider and ask them for help switching to a nano SIM card. Please avoid using a larger SIM card that has been cut to a smaller size as this may cause your device to not recognize the SIM card. Using a modified SIM card may also result in it getting stuck since the modified SIM card may be thicker than the required nano SIM card. When you have finished inserting your nano SIM and media card the next step is completing the BlackBerry Classic setup wizard.
Step 2 – Complete the set up wizard
If you haven’t already, turn on your BlackBerry Classic by pressing and holding the power button on the top of your device so you can complete the setup process. This process guides you through connecting to a Wi-Fi network, setting up a new BlackBerry ID, or signing into your existing BlackBerry ID, as well as showing you several fundamental gestures.
Tip: If you don’t have a BlackBerry ID you’ll be able to create one during the setup process and, in the event you don’t remember your BlackBerry ID password, use the Forgot Password option to reset your BlackBerry ID password. Don’t forgot to confirm your BlackBerry ID, which can help you recover your password in case you ever forget it!
When you have finished the setup wizard, the new and improved Setup app will open automatically.
Within this app you’ll be able to complete the following actions that will help you learn more about your new device and customize everything just the way you like
Find out what’s different about BlackBerry 10
Understand the various gestures used throughout your device
Add your email and social networking accounts
Transfer data from your previous device (See step 3 to learn more!)
Customize your device notifications
Setup BBM so you can connect with family and friends
Set a device password
And more!
When you have finished going through the various options within the Setup App, swipe up from the bottom of the screen to minimize it. You can always access the Setup app in the future by tapping on the Setup icon as well.
Step 3 – Transfer data from your previous device
If you are switching from another device, whether it be BlackBerry OS, BlackBerry 10, Android or iPhone, there are several different methods you can use to help transfer data to your new device.
For a visual overview, check out the following videos that guide you through this process. The Setup app on your BlackBerry Classic can also help you do this, just open the Setup app, tap Switching Devices and follow the provided steps.
Android device to BlackBerry 10 smartphone
BlackBerry OS smartphone to BlacKBerry 10 smartphone
iOS device to BlackBerry 10 smartphone
If you encounter any issues transferring your data, or would like some guidance, stop by the Device Switch board within the BlackBerry Support Community Forums and ask the community.
If you switch from another device don’t forget to perform a security wipe on your old device to remove your personal information. If your previous device was a BlackBerry device, check out our post on how to perform a security wipe.
If you use a different type of device, review the user documentation to learn how to reset it to factory settings and remove your personal information.
Step 4 – Secure your new device and turn on BlackBerry Protect
If you haven’t already set a device password, I cannot stress enough how important this is. Doing so can help prevent unwanted access if you leave your device unattended and, in the event you misplace your device, no one will be able to view your personal information. To set a device password, complete the following steps:
On the home screen, swipe down from the top of the screen
Tap Settings followed by Security and Privacy
Tap Device Password
Set the Device Password switch to On
Enter your desired password twice
After setting a device password make sure you verify that BlackBerry Protect is enabled on your device by going to Settings followed by BlackBerry Protect.
When enabled, BlackBerry Protect can help you locate, lock, or wipe your device where you are, provided your device is connected to the mobile or Wi-Fi network. To learn more about BlackBerry Protect go to http://protect.blackberry.com.
Step 5 – Where to learn more and find help
The easiest way to learn more about your new BlackBerry Classic is by opening the Help app, which contains a lot of useful information ranging from tips and tricks to how-to overviews. You can also view, download, or save the user guide for your device by visiting http://docs.blackberry.com.
I would also recommend reviewing BlackBerry Classic how-to demo videos that show the various features and functions offered by your device. These demos can be viewed on your device, computer, or tablet. Several BlackBerry Training courses are also available – make sure you try these out on your computer, or device to learn more about the BlackBerry Classic and BlackBerry 10 OS version 10.3.1.
What's New in BlackBerry 10 OS Version 10.3.1
Introducing BlackBerry 10 OS Version 10.3.1
Supporting BlackBerry 10 OS Version 10.3.1
Introducing the BlackBerry Classic smartphone
Another great way to learn more is by taking the BlackBerry 10 Pop Quiz, which you can find within BlackBerry World. This app offers short quizzes that can help you learn more about your device and it only takes a few minutes to complete each test – it’s the perfect coffee break companion!
To get the BlackBerry 10 Pop Quiz, open BlackBerry World and search for it or click here. Another great resource to learn more about your device, beyond this blog of course, is the BlackBerry Classic support site located at http://www.blackberry.com/classicsupport
If, after reviewing this content you have a question, register and join the discussions within the BlackBerry Support Community Forums or send a tweet to @BlackBerryHelp.
Got a question? Leave a comment and let me know!
Did someone help you? Click Like! Did a post solve your issue? Click Accept as Solution!
Follow me on Twitter or Google+ and subscribe to the Inside BlackBerry Help Blog

Very nice detailed information about BlackBerry Classic. Looking forward for more updates and also KB's for support.

HT4972 After upgrading iPhone 4 to iOS 5.1.1 getting the error "iTunes could not restore the iPhone because the backup was corrupt or not compatible with the iPhone that is being restored" HELP!

I attempted to upgrade my iPhone 4 to iOS 5.1.1. I selected 'back up' from the phone in the device menu and iTunes confirmed that the phone had been backed up. I then installed iOS 5.1.1 which wiped everything on the phone & now I am getting the error "iTunes could not restore the iPhone because the backup was corrupt or not compatible with the iPhone that is being restored".
I have tried restoring factory settings but iTunes simply will not restore from back up & I'm not sure what else to do!
Any advice would be much appreciated.

I have the same issue and I KNOW my backup IS good. What happen is when you try to restore your phone apple says something like can I check for new updates and if you choose no, it just takes you back to the restore screen and a loop from then on. If you dont update from you phone then when you back up you will have the 5.0.1 back up and then when you update to 5.1.1 and then try to restore the backup from 5.0.1 it say it EITHER corrupt or incompatible.. It is incompatible and its hard as **** to restore back to 5.0.1. I followed the restore to a T and still getting errors. I lost all text history and have to reset up email. All just because I wanted a 1.2 Gigs of "other" space back.

I have the current version of itunes, but when I go to update my ipod, I am getting an error message that says that it could not back up because the backup was corrupt or not compatible with the iPod. This is the first time trying to backup.

I have the current version of itunes, but when I go to update my ipod, I am getting an error message that says that it could not back up because the backup was corrupt or not compatible with the iPod. This is the first time trying to backup the iPod. I have authorized my computer. Still no luck.

Go to iTunes>Preferences>Devices and select the iPod backjp and click on delete and try again.
Also
- Reboot the computer
- Try another cable
- Try another USB port

HT1926 can't install quicktime or itunes on windows 7 get the error message There is a problem with the windows installer package. A program required for this install to complete could not be run

please help. Can't install quictime player or itunes on windows 7. Get the error message There is a problem with the windows installer package. A program required for this install to complete could not be run. Have followed all the steps suggested and still no luck.

thank you for trying to help. I do not have apple software update on my computer. I have tried to install several programs so i could install it but every installation will not finish and rolls back and says no changes were made to my computer so i can't install the update. I even tried to force install as administrator but nothing works. Any help would be greatly appreciated. I have windows 7 64 bit.

Hello, so today I realized that my iPhone with iOS 6 is frozen on the music. I can get back to the home screen but I can't get the music player to work because its frozen on the w's and will not respond to touch. I would be grateful for any help on this.

Hello, so today I realized that my iPhone with iOS 6 is frozen on the music. I can get back to the home screen but I can't get the music player to work because its frozen on the w's and will not respond to touch. I would be grateful for any help on this.

Hi deamayfield,
Thanks for visiting Apple Support Communities.
If your Music app is unresponsive, try restarting/resetting your iPhone:
iOS: Turning off and on (restarting) and resetting
http://support.apple.com/kb/ht1430
Best,
Jeremy

I am getting error message "iTunes could not back up the iPhone because the backup was corrupt or not compatible with the iPhone". I have deleted the backup and restarted my computer, but continue to get this error message. What do I need to do now?

I have recently updated my phone and am attempting to sync it. I got the error message "iTunes could not back up the iPhone because the backup was corrupt or not compatible with the iPhone". I deleted the backup, restarted my computer, and even restored the iPhone, but continue to get the same error message. What do I need to do now?

iTunes places the iPhone backup in the following location. Navigate there & delete everything in the backup folder, but not the folder itself. You will have to turn on "Show All Hidden Files & Folders" to see it:
Mac:~/Library/Application Support/MobileSync/Backup/
Windows XP:\Documents and Settings\(username)\Application Data\Apple Computer\MobileSync\Backup\
Windows Vista and Windows 7:\Users\(username)\AppData\Roaming\Apple Computer\MobileSync\Backup\

The answer in formula cells gets combined with the previous answer making it unreadable.

Similar Messages

Maybe you are looking for