The application failed to start (msvcp100.dll and atl100.dll not found)

I recently have been getting this error upon opening up LabView 2012. I get two seperate error messages. The first says "The application failed to start because MSVCP100.DLL was not found. Re-installing this application may fix the problem." The other message says the same thing but it is ATL100.DLL that is not found.
I think these files are part of the C runtime engine, but I don't know what I need to install to fix this issue.
Solved!
Go to Solution.

Hello boochbrain, 
I believe you are correct that these files are part of a runtime engine; specifically, the C++ runtime library.  Reinstalling these libraries could definitely alleviate these errors you are seeing.
Here is a link to free download pages for various versions of this software on Microsoft's website:  http://www.microsoft.com/en-us/download/search.aspx?q=visual+c%2b%2b
Let me know how it works out!
Kevin W.
Applications Engineer
National Instruments

Similar Messages

  • Application failed to start, cvirt.dll not found error

    I built an application with installer, including the runtime engine. When this is installed the application fails to run as it appears to be missing cvirt.dll. I am using Labview 7.1 and have never had this problem before. On a platform where the full labview environment is installed the application runs fine.
    Any help much appreciated.
    Thanks
    Marco

    Thanks for the reply Robert.
    I have no idea which component requires cvi. I am using GPIB and use the USB through an external dll, which is included in the distribution.
    When I manually copied cvirt.dll, cviauto.dll, and cvirte.dll in the system32 folder another error appeared: Can not find RTE directory
    When I wrote a simple test program (only a stop button and a loop), it worked fine.
    I downloaded a copy of Labview runtime engine and installed that. That did not solve it on my test PC, but did solve it on the PC it was intended for.
    My problem seems to be solved for now, but I would like to know if there is a way of preventing this with the application builder.
    Thanks for your help.
    MarcoMessage Edited by MarcoNZ on 04-19-2005 05:21 PM

  • TS3212 I had to re download Itunes, i get 2 errors; "failed to start MSVCR80.dll not found" and "error 7, windows error 126"

    iTunes will now download because of 2 errors; "failed to start MSVCR80.dll not found" and "error 7, windows error 126" using microsoft.

    Click here and follow the instructions.
    (98918)

  • HT1926 I have just updated itunes on my pc (widows XP) to the latest version. When I try to open it i get an error message saying the application failed to start because MSVCR80.dll could not be found. Not sure how to resolve this. Have tried to reinstall

    I have just updated itunes on my pc (windows XP) to the latest version. When I try to open it I get an error message saying the application failed to start because MSVCR80.dll was not found< Have tried reinstalling with no luck. Any ideas?

    try removing all itunes and all other apple program
    follow this link for more info. http://support.apple.com/kb/HT1923
    reboot ur window after uninstalling
    after that download the latest itunes setup and install.

  • During Palm reinstallation, when reboots get errors, "The application failed to initialize properly (0xc0000142)" and "DeviceMonitor MFC Application has stopped working."

    I'm trying to reinstall the Palm software because synchronization has been failing for the past two months.  It get to the point of synchronizing the calendar and fails with the message that there are too many events.  Hence, nothing in the process after that synchronizes.  I've tried reinstalling the Palm s/w to no avail.  Now I'm trying to uninstall and reinstall the Palm s/w only to be greeted with another error message when the system restarts (as part of the installation process).  The error is, "The application failed to initialize properly (0xc0000142).  Click OK to terminate the application."  When I choose OK, I get the error, "DeviceMonitor MFC Application has stopped working."  Windows does not notify me of a solution.  Any ideas/solutions would be greatly appreciated!
    Thanks,
    Gina
    Post relates to: Tungsten E2

    Hello and thank you for using the Palm Help Forums!
    You may need to do a clean uninstall of the Palm desktop software to resolve your issue.
    Uninstall Palm Desktop by going to your Control Panel > Add/ Remove Programs > Remove Palm and/ or PalmOne 
    Delete the following folders:
    C:\Palm
    C:\Program Files\Palm
    C:\Program Files\PalmOne
    C:\Program Files\Handspring 
    From the Windows start menu, select Run.
    Type Regedit and click Run or OK
    *NOTE* BE VERY CAREFUL IN YOUR REGISTRY KEY EDITOR. IF THE WRONG THING IS DELETED THIS CAN CAUSE SERIOUS DAMAGE TO YOUR COMPUTER'S OPERATING SYSTEM. 
    Delete the following keys: 
    HKEY_Current_User\Software\PalmDesktopAutorun
    HKEY_Current_User\Software\Palm
    HKEY_Current_User\Software\Palmone
    HKEY_Current_User\Software\U.S Robotics-- (check and make sure only palm related keys are under this one)
    Delete this key as well:
    HKEY_Local_Machine\Software\PalmSource
    Close the Registry window
    Restart PC upgrade to new palm desktop (by going to www.palm.com).
    Post relates to: Treo 800w (Sprint)
    Post relates to: Treo 800w (Sprint)

  • My i tunes is not working anymore. it says the application failed to start because MSVCR80.dll was not found. I have tried re-installing the program but it doesn't work.

    Hello,
    Yesterday I tried to get onto iTunes and was unable to. I keep getting this message:
    Itunes.exe - Unable to locate component.
    This application has failed to start because MSVCR80.dll was not found.
    Re-installing the application may fix this problem.
    I have tried to uninstall and re-install the program several times but cannot get it to work. Now I get this message:
    iTunes was not installed correctly. Please reinstall iTunes.
    Error 7 (Windows error 126)
    I have tried to do what I can but am not really iTunes savy and would like to get this issue resolved. Can anyone help me?
    THANK YOU!!
    Cyn

    Hello there, Cyn.
    The following Knowledge Base article provides some great information for troubleshooting your issue. Keep in mind uninstalling and reinstalling has to be done in a very specific fashion, therefore use the guidelines from this article to accomplish this:
    Issues installing iTunes or QuickTime for Windows
    http://support.apple.com/kb/ht1926
    Thanks for reaching out to Apple Support Communities.
    Cheers,
    Pedro.

  • What happened? After this morning Firefox's update, I couldn't get into Firefox but got this message, "The application failed to start because it's side-by-side configuration is incorrect.

    This morning I went to go into Firefox, a message came up stating it was updating. After the update, Firefox didn't open, so I clicked on the icon and got this message. C:\Program Files (x86) Mozilla Fire\firefox.exe. The application has failed to start because its side-by-side configuration is incorrect. I tried removing & re-installing and I even try the Window's restoration point of a couple days back and I still get the message. Has anyone had or have this problem?

    You can click the link in my above post if you haven't done that yet.
    *https://support.mozilla.org/questions/910134
    That SxS error seems to be caused by a corrupted Visual C installation that requires some DLL files to be reinstalled.
    *http://www.vistax64.com/software/245768-side-side-configuration-incorrect.html

  • After updayting fire fox the applixation will not open I get a message that says the application failed to start because its side -by - side configureation is in correct. please see event log or use the command sxstrace.exe tool for more detail

    fire fox will not open

    See:
    *[[/questions/910134]]
    Seems to be caused by a corrupted Visual C++ installation (multiple versions can be installed side-by-side; SxS).
    You can try to use the sxstrace.exe tool to see if you can find which files are missing or corrupted and (re)install missing Visual C++ libraries.
    * http://www.vistax64.com/software/245768-side-side-configuration-incorrect.html
    * http://answers.microsoft.com/en-us/windows/forum/windows_7-pictures/error-the-application-has-failed-to-start-because/df019c0d-746e-42d0-ad68-465e18e3f3ef

  • Could not open the ICU common library or RFC DLL not found

    Hello all,
    I'm using SAP .NET Connector for integration between .NET application and SAP System. (SAP ERP2005 (SAP ECC 6.0) SP11 installed on Microsoft Windows Server 2003 R2 Standard x64 Edition; I use MS WinXP SP3 and SAP .NET Connector2.0, SAPGUI 7.1)
    One of the following errors appears when I try to call document checkin/checkout BAPI (it depends on which set of ICU libraries we use):
    u2022      u201CCould not open the ICU common libraryu201D in case when I use ICU dll from our basis first set
    Could not open the ICU common library.
    The following files must be in the path described by
    the environment variable "PATH":
    icuuc30.dll, icudt30.dll, icuin30.dll
    u2022      u201CRFC DLL not foundu201D in case when I use ICU dll from from http://icu-project.org/
    Please, help if you know how to solve this issue.
    Regards,
    Alex
    Edited by: Alexey120 on Feb 5, 2010 11:20 AM

    I solved the problem with ICU dll by means of reinstall SAPGUI 7.1. But now I call BAPI checkin/checkout and don't get any result. Can anybody to provide an C# example how call BAPI like checkin/checkout?

  • Active MovieWindo​w:Rim.Tran​scoder.Exe​-This applicatio​n has failed to start because MagCore.dl​l was not found

    Immediately after installing the latest version of Blackberry Desktop, I got the above error.  When I clicked the OK button, the error dialog box closed, and then popped right back up.  I found that if I moved the dialog box to the side, the Desktop software worked fine.
    MagCore.dll is a component of ArcSoft products, so I uninstalled the only ArcSoft software on my computer: MediaImpressions.  After rebooting to complete the uninstall, the error disappeared. 
    Here is another user with the same problem:
    http://answers.microsoft.com/en-us/windows/forum/w​indows_xp-hardware/active-moviewindowrimtranscoder​...

    Immediately after installing the latest version of Blackberry Desktop, I got the above error.  When I clicked the OK button, the error dialog box closed, and then popped right back up.  I found that if I moved the dialog box to the side, the Desktop software worked fine.
    MagCore.dll is a component of ArcSoft products, so I uninstalled the only ArcSoft software on my computer: MediaImpressions.  After rebooting to complete the uninstall, the error disappeared. 
    Here is another user with the same problem:
    http://answers.microsoft.com/en-us/windows/forum/w​indows_xp-hardware/active-moviewindowrimtranscoder​...

  • Calendar Server installation gets error "libnmspr20.dll not found"

    Calendar Server installation gets error "libnmspr20.dll not found"
    <P>
    When installing Calendar Server 3.5 on NT near the end an error
    occurs: "libnmspr20.dll not found " and then it will exit the setup
    without completion.
    This is a bug because it is looking for the libnmspr20.dll in the
    system path but the Calendar Server installation has left it in a
    temp directory. This does not occur if the Netscape Messaging Server
    has been previously installed on the same host. A workaround is, when
    the error message displays, you DON'T press ok, but search your
    computer for the missing file (usually found in temp-directory).
    You then copy the file to a directory in your system path. Now you
    can press the OK button and the installation will fail. Re-install
    the calendar server, this time the installation won't fail.

    Installing Latest JRE on NT4 sp6a produces the same error:
    InstallShield DLL Custom Action:
    File 'C:\TEMP\RegUtils.dll' can not be found. Make sure the file is on the target system or installed already.
    I searched www.installshield.com since the error is an installer error and the installer is InstallShield. NO results found there either.
    Seems like the installer team needs to brush up on the NT4 platform.

  • I had itunes installed on my pc. I received notice to update. I started update but gpt the following message - this application failed to start because MSVCR80.dll was not found. Reinstalling may fix the problem. I uninstalled and have tried to reinstall

    I already had itunes installed on my pc. I received an update and tried to install it. I got a message
    This application failed to start because MSVCR80.dll was not found. Reinstalling may fix the problem.
    I uninstalled itunes and tried to reinstall. itunes says it has installed but when I try to open itunes I get the same message.
    How do I repair/sort out this error/fault
    Thanks
    David

    Try the following user tip:
    Troubleshooting issues with iTunes for Windows updates

  • My iTunes will not start.  The box on the error message APSDaemon.exe,  And message says "This application failed to start because MSVC80.dll was not found.  Reinstalling may fix."  I did the reinstall and I get the same error.

    My iTunes will not start.  The box on the error message APSDaemon.exe,  And message says "This application failed to start because MSVC80.dll was not found.  Reinstalling may fix."  I did the reinstall and I get the same error.  The error first happened after I approved the an iTurns update.

    Same problem today. Took five times to reinstall without any error messages. Apple has posted a way to fix and you should follow their's first. I finally got to upldate correctly by doing their fix but with one difference. I did the following:
    1) Went to the C:\program files (x86)\iTunes and C:\program files\iTunes folders and moved every file ending in .dll to the desktop (even if two files in same location had the same name, just replace)
    2) Restarted computer and still got error message
    3) Uninstalled all apple programs possible in the following order......itunes, apples software update, apple mobile device support, bonjour, and apple application support.....all performed using the microsoft control panel
    4) put all the .dll files on the desktop in the trash and emptied (this is a step apple support did not specifically put in their fix but for a final try I wanted to delete everything apple).
    5) Restarted computer.
    6) Re-installed itunes from apple website
    No error messages during re-install and was able to open shortcut in one try. Even updated my ipad to make sure everything was working.

  • After the last update iTunes no longer works...  "This application failed to start because MSVCF80.dll was not found.  Re-installing the application may fix this problem"  I tried and it did not fix the problem?

    After the last update iTunes no longer works...  "This application failed to start because MSVCF80.dll was not found.  Re-installing the application may fix this problem"  I tried and it did not fix the problem?

    Click here and follow the instructions.
    (99061)

  • I am trying to install the newest version of Itunes and it fails with the message "Program cannot start MSVCR80.dll is missing from your computer. Try reinstalling program to fix this program.I have tried reinstalling several times but get same results

    I am trying to install the newest version of Itunes and each time I repeatedly get the message "Program cannot start MSVCR80.dll is missing from your computer Try reinstalling to fix this problem". I have tried reinstalling several times and I get the same message . Any ideas? I am most appreciative. I am using Windows 7.

    Hi 49balf,
    Thanks for visiting Apple Support Communities.
    I recommend removing and reinstalling iTunes using these steps:
    Check for .dll files
    Go to C:\Program Files (x86)\iTunes and C:\Program Files\iTunes and look for .dll files.
    If you find QTMovie.DLL, or any other .dll files, move them to the desktop.
    Reboot your computer.
    Note: Depending on your operating system, you may only have one of the listed paths.
    Uninstall and reinstall iTunes
    Uninstall iTunes and all of its related components.
    Reboot your computer. If you can't uninstall a piece of Apple software, try using the Microsoft Program Install and Uninstall Utility.
    Re-download and reinstall iTunes 11.1.4.
    You can find the article with these steps and more information here:
    iTunes 11.1.4 for Windows: Unable to install or open
    http://support.apple.com/kb/TS5376
    Best,
    Jeremy

Maybe you are looking for