The argument does not represent an annotation type

Hello, i stated getting this exception today:
java.lang.IllegalArgumentException: The argument does not represent an annotation type: <MyAnnotationType>
even if <MyAnnotationType> is an annotation and the processor used to work unmodified.
Is there a way to check if the TypeElement before calling roundEnv.getElementsAnnotatedWith(annotation) ?
The code in question is:
     @Override
     public boolean process(Set<? extends TypeElement> annotations,
               RoundEnvironment roundEnv) {
          for (TypeElement annotation : annotations) {
               for (Element el : roundEnv.getElementsAnnotatedWith(annotation)) {
          return true;

Julio.Faerman wrote:
Hello, i stated getting this exception today:
java.lang.IllegalArgumentException: The argument does not represent an annotation type: <MyAnnotationType>
even if <MyAnnotationType> is an annotation and the processor used to work unmodified.So is there something else that changed today in your environment?

Similar Messages

On the app store the text box pops up to type in the password for the download but the keyboard does not so i cannot type inmy password so i cannnot download apps

help is there anywaay i can fix this other than resetting ipod

Try resetting the iPod, Nothine will be lost.
Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.

Any idea what this errorr means? the data type of the reference does not match the data type of the variable

I am using Veristand 2014, Scan Engine and EtherCat Custom Device. I have not had this error before, but I was trying to deploy my System Definition File (run) to the Target (cRio 9024 with 6 modules) and it failed. It wouldn't even try to communicate with the target. I get the 'connection refused' error.
I created a new Veristand project
I added the Scan Engine and EtherCat custom device.
I changed the IP address and auto-detected my modules
i noticed tat Veristand didn't find one of my modules that was there earlier. (this week)
So, i went to NiMax to make sure software was installed and even reinstalled Scan Engine and Veristand just to make sure.
Now, it finds the module, but when i go to deploy it getsto the last step of deploying the code to the target, and then it fails.
Any thoughts?
Start Date: 4/10/2015 11:48 AM
• Loading System Definition file: C:\Users\Public\Documents\National Instruments\NI VeriStand 2014\Projects\testChassis\testChassis.nivssdf
• Initializing TCP subsystem...
• Starting TCP Loops...
• Connection established with target Controller.
• Preparing to synchronize with targets...
• Querying the active System Definition file from the targets...
• Stopping TCP loops.
Waiting for TCP loops to shut down...
• TCP loops shut down successfully.
• Unloading System Definition file...
• Connection with target Controller has been lost.
• Start Date: 4/10/2015 11:48 AM
• Loading System Definition file: C:\Users\Public\Documents\National Instruments\NI VeriStand 2014\Projects\testChassis\testChassis.nivssdf
• Preparing to deploy the System Definition to the targets...
• Compiling the System Definition file...
• Initializing TCP subsystem...
• Starting TCP Loops...
• Connection established with target Controller.
• Sending reset command to all targets...
• Preparing to deploy files to the targets...
• Starting download for target Controller...
• Opening FTP session to IP 10.12.0.48...
• Processing Action on Deploy VIs...
• Setting target scan rate to 10000 (uSec)... Done.
• Gathering target dependency files...
• Downloading testChassis.nivssdf [92 kB] (file 1 of 4)
• Downloading testChassis_Controller.nivsdat [204 kB] (file 2 of 4)
• Downloading CalibrationData.nivscal [0 kB] (file 3 of 4)
• Downloading testChassis_Controller.nivsparam [0 kB] (file 4 of 4)
• Closing FTP session...
• Files successfully deployed to the targets.
• Starting deployment group 1...
The VeriStand Gateway encountered an error while deploying the System Definition file.
Details:
Error -66212 occurred at Project Window.lvlibroject Window.vi >> Project Window.lvlib:Command Loop.vi >> NI_VS Workspace ExecutionAPI.lvlib:NI VeriStand - Connect to System.vi
Possible reason(s):
LabVIEW: The data type of the reference does not match the data type of the variable.
=========================
NI VeriStand: NI VeriStand Engine.lvlib:VeriStand Engine Wrapper (RT).vi >> NI VeriStand Engine.lvlib:VeriStand Engine.vi >> NI VeriStand Engine.lvlib:VeriStand Engine State Machine.vi >> NI VeriStand Engine.lvlib:Initialize Inline Custom Devices.vi >> Custom Devices Storage.lvlib:Initialize Device (HW Interface).vi
• Sending reset command to all targets...
• Stopping TCP loops.
Waiting for TCP loops to shut down...
• TCP loops shut down successfully.
• Unloading System Definition file...
• Connection with target Controller has been lost.

Can you deploy if you only have the two 9401 modules in the chassis (no other modules) and in the sysdef? I meant to ask if you could attach your system definition file to the forum post so we can see it as well (sorry for the confusion).
Are you using any of the specialty configurations for the 9401 modules? (ex: counter, PWM, quadrature, etc)
You will probably want to post this on the support page for the Scan Engine/EtherCAT Custom Device: https://decibel.ni.com/content/thread/8671
Custom devices aren't officially supported by NI, so technical questions and issues are handled on the above page.
Kevin W.
Applications Engineer
National Instruments

I need to delete the entire browsing history so when i type in a webpage it soes not bring up previuosly visited sites. deleting the history does not do this. any one know how to do this

I need to delete the entire browsing history so when i type in a webpage it soes not bring up previuosly visited sites. deleting the history does not do this. any one know how to do this

Judy-
If Private Browsing doesn't do it, try Settings-Safari-Advanced-Website Data-Remove All Websitre Data.
Or changing Settings-Safari-Autofill to OFF.
You might also try Settings-Safari and Clear History and Clear Cookies and Data.
As you can see, there are several controls for Safari. Which one works depends on what your problem is.
Fred

When I click to open Mozilla icon on my desktop, the page does not open & I cannot access it unless I type it in an Internet Explorer page?

When I click to open Mozilla icon on my desktop, the page does not open & I cannot access it unless I type it in an Internet Explorer page? When clicking on the Icon sometimes it will flash to the right of my desktop screen but does not open for access.

Hi Dave, thanks for your answer.
I have tried a several times to repairing permissions, restarting the mac, relaunched Finder, but no difference.
I copied the download folder to the dock...there I can open the files, but not deleting them or copying them.
When I open finder, then I click on the folder Download, after a while of thinking, it throws me out and back to the desktop.
already tried to sign in with the guest user account, then I am able to open the download folder.(but not seeing my files)
When I am trying to change the download folder in Safari, it also throws me out and gives me a error report ,for sending to Apple.
I think it's a settings fault or i think my download folder is locked. Almost desperat, already called support center,
They couldn't help, for free, due the 90 days free online help i have reached. If I want to solve this problem, they could try it , but it cost me almost 50 euros.
hope there is someone, who's knowing this problem.
By the way, I think it also could be that I dragged some downloaded music to the desktop, and dragged some folder that has the settings. Now its changed???
Or I was downloading something, and deleted the files in the download folder while it was unpacking and reparing the files.
It's not easy for a beginner Mac user (3 months) to already solve this problems.
Can you follow me? And seems this problem familiar to you?
Thanks in advance

HT4113 My daughters iPod touch asks for her pass code but when she types it in the cursor does not move or input any characters so,she cannot get into the iPod. This has suddenly happened for no apparent reason

My daughters iPod touch asks for her pass code but when she types it in the cursor does not move or input any characters so,she cannot get into the iPod. This has suddenly happened for no apparent reason, what can we do? Can anyone help please?

Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar

Processor type of the file and the device does not match

We ve the following problem with Zfh 7 sp1. When trying to distribute a
application we receive the message failed. When i open the log is see the
below message.
The processor type of the file and the device does not match.
I ve searched on the message and i ve seen that it is a know error and it
should be fixed in SP1
10100578 - ERROR: Skipped installation of file on device <DEVICE(Username)
> GUID <XXXXXXXX-XXXX-XXXX-XXXX-XXXXXXXXXXXX>. The processor type of the
file and the device does not match.?
The processortype of the device is StrongARM and also from the
applications. Also when i put it on ALL/CEF it won't distribute.
Does some other people also have this problem.

Mail,
It appears that in the past few days you have not received a response to your
posting. That concerns us, and has triggered this automated reply.
Has your problem been resolved? If not, you might try one of the following options:
- Do a search of our knowledgebase at http://support.novell.com/search/kb_index.jsp
- Check all of the other support tools and options available at
http://support.novell.com.
- You could also try posting your message again. Make sure it is posted in the
correct newsgroup. (http://support.novell.com/forums)
Be sure to read the forum FAQ about what to expect in the way of responses:
http://support.novell.com/forums/faq_general.html
If this is a reply to a duplicate posting, please ignore and accept our apologies
and rest assured we will issue a stern reprimand to our posting bot.
Good luck!
Your Novell Product Support Forums Team
http://support.novell.com/forums/

I'm trying to send a message from my new MacBook Air, I can type the message but when I hit enter the message does not go?

I'm trying to send a text message from my new MacBook Air, I can type the message but when I hit enter the message does not go.

Have you addressed the message to someone? Is that address capable of receiving text messages?
What happens when you hit enter?

HT204319 When I power on my Macbook os x the keyboard does not work, so I can't type in my password Help !!!

When I power on my Macbook os x the keyboard does not work, so I can't type in my password Help !!!

Try these as a starting point:
http://support.apple.com/kb/HT3964
Follow directions for a battery you can remove, or a battery you should not remove yourself (which ever applies to you)
Try a NVRAM/PRAM reset:
http://support.apple.com/kb/HT1379
If no joy, take it in to an Apple Gennius bar for a FREE evaluation.

The user does not exist or is not unique - workflow problem

I am using Solution Starters Dynamic Management workflow on my Project Server 2010. I was working fine for a year now, but today all workflows were broken when someone tried to submit them to a next stage. "Workflow terminated. An error has occurred
in the workflow."
I tried debbuging the workflow and it seems to be OK, but the problem appears when it needs to assign tasks to the approvers (they are in the Approvers group). When I remove users from the group that represents approvers (and leave that group empty), it
works fine, so I am guessing that users (who need to approve the stage) are the problem. My administrators are saying that there were no updates or changes on AD machine.
I don't have problem with users in any of people picker fields or anywhere else on the site. I am using claims auth.
What could be the reason for this behavior??
These are main errors from the log:
Failed to persist workflow instance: 7dc2e035-cd02-4284-b851-a829e372a809 with error code: 5, instance data size: 29578, internal state: Running, processing id: 1e2211d2-ef7b-4416-90ef-ac041396c200   2f83db27-34da-4275-a42e-0625240af921
The user does not exist or is not unique.
WinWF Internal Error, terminating workflow Id# 7dc2e035-cd02-4284-b851-a829e372a809
System.ArgumentOutOfRangeException: Specified argument was out of the range of valid values. Parameter name: additionalNodes     at Microsoft.Office.Workflow.Actions.OfficeTask.ProcessTaskError(Object sender, EventArgs e)
at System.Workflow.ComponentModel.ActivityExecutorDelegateInfo`1.ActivityExecutorDelegateOperation.Run(IWorkflowCoreRuntime workflowCoreRuntime)     at System.Workflow.Runtime.Scheduler.Run()

It appears that this isn't the problem with users, but it is a problem with Office Tasks. This is the main error in ULS logs (same as in the previous post):
"Specified argument was out of the range of valid values. Parameter name: additionalNodes"
I noticed that all content types are gone from my pwa site. Is it possible that my workflow is causing problems when adding tasks because somebody deleted all content types??

Argument does not exist in Table?

Hi,
I'm trying to create Planned Independent Requirements using the BAPI_REQUIREMENTS_CREATE.
Getting the error "Argument does not exist in Table".
I'm passing the following parameters.
REQUIREMENTS_ITEM
      MATERIAL    = '000000000000015197'.
      PLANT         = 'ABC1'.
      REQU_TYPE= 'TEST'.
      VERSION    = '00'.
      VERS_ACTIV = 'X'.
      REQ_NUMBER = ''.
REQUIREMENTS_SCHEDULE_IN
DATE_TYPE = '2'.
REQ_DATE = '20101001'.
REQ_QTY   = 50.
PROD_VES = '0010'.
REQUIREMENT_PARAM
      STATUS = ''.
      TRTYP   = 'X'.
      DELKZ   = SPACE.
      SYNCRON = 'X'.
Did I miss any parameters?
Why I'm getting this error?
Thanks
Thruna

Ryan,
Are you passing all the parameters like below?
SSHDIN-DATE_TYPE = '2'.
SSHDIN-REQ_DATE = '20100101'.
SSHDIN-REQ_QTY   = 100.
APPEND SSHDIN.
      ITEM-MATERIAL    = '00000000000012345'.
      ITEM-PLANT         = 'ABC1'.
      ITEM-REQU_TYPE = 'TEST'.
      ITEM-VERSION    = '00'.
      ITEM-VERS_ACTIV = 'X'.
      ITEM-REQ_NUMBER = ''.
      ITEM-MRP-AREA = 'ABC1'.
      PARAM-STATUS = 'X'.
      PARAM-TRTYP   = 'X'.
      PARAM-DELKZ   = SPACE.
      PARAM-SYNCRON = 'X'.
      CALL FUNCTION 'BAPI_REQUIREMENTS_CREATE'
           EXPORTING
                REQUIREMENTS_ITEM        = ITEM
                REQUIREMENT_PARAM        = PARAM
           IMPORTING
                MATERIAL                 = BAPI_MATNR
                PLANT                    = BAPI_WERKS
                REQUIREMENTSTYPE         = BAPI_BEDAE
                VERSION                  = BAPI_VERSB
                REQMTSPLANNUMBER         = BAPI_PBDNR
           TABLES
                REQUIREMENTS_SCHEDULE_IN = SSHDIN
                RETURN                   = RETURN1
           EXCEPTIONS
                OTHERS                   = 1.
Thanks
Thruna

Error when opening indd-file: Either the file does not exist, you do not have permission, or the...

Hi! I'm having trouble opening a indd-file. It was sent to me as a zip-fil along with the used fonts and links. When I try to open the file, I'm getting this error: "Either the file does not exist, you do not have permission, or the file may be in use by another application". I've tried to look up this error both here in these forums and through google, but can't find a similar case. Hope someone can help me with this. Please let me know if you need more information/details, and I'll provide. Thanks!

function(){return A.apply(null,[this].concat($A(arguments)))}
I'm suspecting it to come from a mac user, if that could influence the case...
It does come from a Mac, as is proven by the fonts, which are of no use on my Windows machine, but that doesn't prevent my CS4 to open it without any problem. It seems to me it's a perfectly regular CS2 file.
Just for cheers I set the file to Read-only, but my InDesign opens it regardless (again as a copy, because it's a "converted" file).
Could it be something in your environment? No network read/write privileges, insufficient free hard disk space, stuff like that?

"the path does not exist" error opening shared adobe files on XP machine

We recently upgraded a mac mini from Tiger (10.4.11) to Leopard (10.5.X) we updated to the most recent 10.5.
We have an office with 3 macs and 1 XP.
All users connect to the Mac Mini via SMB sharing.
Everyone Authenticates as the same admin user.
*The XP machine can open and save all file types EXCEPT Adobe Photoshop and Illustrator files.*
They are using CS3.
The mac and XP users could open save and share all files prior to the leopard update.
We used the "Archive and Install" option to upgrade to leopard.
The shared files had the "unknown Group" error which we solved by adding them to the ADMIN group. This step changed the error message the the XP user was receiving.
I have tried many networking fixes, including group policy on windows, turning off IPv6 on the Mini, but we cannot open or save files directly from Illustrator.
When the file
We can move files to the XP desktop then open and save. Files saved on the XP machine can be moved back to the mini and opened directly by all of the Mac users.
Any guesses why this might be occurring?

There are actually two separate error messages received by the windows user when trying to open files off of the Mini.
"the path does not exist" and "this file cannot be found".
This happens when we navigate directly to the file with windows explorer.

When typing an address in the location bar and pressing enter, nothing happens and the site does not load. How can I fix this?

When I type a new URL in the address bar (or location bar), and I either type the complete URL or select from the drop down list, nothing happens. I hit enter, and the website does not load in the current tab, new tab nor in a new window. Exactly the same when I hit the green arrow to the right of the address bar. I am using Firefox 8, and all my add-ins are up to date.
It has been working before. The setting to get Firefox to open new pages in a new tab from the address bar is there, so it should open a new tab. But I get nothing at all!
Please help, how can I fix this?
Thanks,
James.

That issue can be caused by an extension that isn't working properly.
Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
*Don't make any changes on the Safe mode start window.
*https://support.mozilla.com/kb/Safe+Mode

Bought a new Ipod touch and the WiFi does not connect. Tried Reset and total Restore, does not connect to Router on DHCP, tried Static manually and still can not get it to connect even though it registers as connected.

Bought a new Ipod touch and the WiFi does not connect. Tried Reset and total Restore, does not connect to Router on DHCP, tried Static IP, Subnet, Router and DNS manually and still can not get it to connect even though it registers as connected. Using Airport for router, latest firmware, no problems with Iphone 4 or Macbook Pro or any other internet devices. After total Restore (factory settings) tried again, showed connected to router, but does not display "check" next to router but little rotating icon even though the wifi range signal shows connected at full strength and it says it is connected. Just can't seem to get it to generate an IP. Any solutions other than turning it on and off again? Not a Merry Christmas morning.

Ok, so, a couple of things: Denisefromwaleska and I have the exact same size/type/color iPod. Now wishing I'd bought the black one maybe...
Second, Airport is an Express and I have a second one that I carry with me when I travel. Tried to connect my Airport Express to the internet and could not although the iPod did recognize the router and tried to connect to the internet for some time, unlike my previous problem. Updated firmware on my travel router, still could not connect to the internet. Going to try to set up a manual Static IP on the travel router here in a few and conect through it although I predict the problem will persist. Back on the Christmas Present Airport Express router, it is back in play and working fine for all devices save the iPod.
Thanks again for all your help, hopefully I can get a solution in place soon,

The argument does not represent an annotation type

Similar Messages

Maybe you are looking for