The attribute dependencies contain a cyclic reference

Hi when i add dependencies in variable i get the above error
the variable am adding dependincies is this one
<ViewAttribute
    Name="Orgsubtypecode"
    IsNotNull="true"
    PrecisionRule="true"
    EntityAttrName="Orgsubtypecode"
    EntityUsage="UamOrganisations"
    AliasName="ORGSUBTYPECODE">
    <TransientExpression><![CDATA[Orgsubtypecode1]]></TransientExpression>
    <Dependencies>
      <Item
        Value="Orgsubtypecode1"/>
    </Dependencies>
</ViewAttribute>am in jdeveloper 11.1.1.6.0

Hi,
I guess Orgsubtypecode1 is somehow related to Orgsubtypecode which causes the cyclic dependencies.
e.g. Orgsubtypecode1 has a groovy expression referencing Orgsubtypecode.
Have you already checked this?
regards
Peter

Similar Messages

WS with cyclic reference on report

Hi everybody,
I need to use a web service that contain a cyclic reference. The type of ws is like this:
rTypeUsed = Record;
TArrayOfTypeUsed = Array of rTypeUsed;
rTypeUsed = Record
    Field01 : String;
    Field02 : String;
    Field03 : String;
    Field04 : Double;
    Field05 : Double;
    Field06 : Double;
    Field_Child : TArrayOfTypeUsed;
End;
And when I tried input this web services on crystal, I gave an error like this:
Logon Failure
Datail: It's can't possible support cyclic reference on squema.
Please check the cyclic path: getTypeUsedResponde->getTypeUsedResult->rTypeUsed->Field_Child->rTypeUsed...
I can't change the web service, because it is used in many places.
There are some solution, work around for solving this problem?
Thanks

Please re-post if this is still an issue or purchase a case and have a dedicated support engineer work with you directly.
Need more details like version and patches applied etc.

Version 4 Error: Expected Container, found Object Reference

We're in the process of upgrading our sequences from 3.5 to
4.0 and for the most part, everything is seamless. However, there is one situation I’ve found
that throws a RTE in 4.0 but works fine in 3.5.
When calling SetPropertyObject on an object reference, the following
error is thrown:
Parameter 'newValue': Expected Container, found Object Reference.
-17308; Specified value does not have the expected type.
Attached is a sequence snippet illustrating this
behavior. The last step should assign
the variable in Parameters with the name in TempStr (“Fred” in this example) to
the first element in the TraceObjRefs array (an array of object references).
What is really confounding is that this works as expected in
3.5. Any insight as to what changed or
what’s the best way to work around this?
Attachments:
AliasBreak35.seq ‏46 KB

We are seeing something similar in TS 4.1.
We have a container with subproperties which are also containers (of the same type actually). Technically, this is an array, we are using the container to be able to address by name. When I extract one of the sub-properties either by GetPropertyObject or by GetNthSubproperty and then try to assign it to a container of the same type, I get the error "Expected container, found object reference".
I attached a sequence with some experiments, using the NI_Limits type and found a solution: the Evaluate method seems to actually copy the values from the source container to the target; but only when it is not called as "PropertyObject.Evaluate()" but stand alone.
But I did not quite understand the mechanics of the aliases. In the sequence, I create an alias, as indicated in the previous posts. Then I can apparently not change that alias again. I used the "Data" member in the NI_Limits container to differentiate between the individual containers.
After the second SetPropertyObject, the value stays the same as before. But when I then change the value in one of the source objects, the other changes with it.
So I am not quite clear what an alias actually is and what its effects are.
Regards
Peter
Attachments:
TestObjRef.seq ‏6 KB

The MDX function CURRENTMEMBER failed because the coordinate for the attribute contains a set

How to handle this error: The MDX function CURRENTMEMBER failed because the coordinate for the attribute contains a set. when executing MDX query:
SELECT (
{ [Measures].[Amount]}
)ON COLUMNS,
[OrganizationUnits].[Description].[Description].MEMBERS,
[OrganizationUnits].[IsCURRENT].[IsCURRENT]
) ON ROWS
FROM
(SELECT [OrganizationUnits].[Description] ON 0
FROM
[CubeName]
WHERE(
{[OrganizationUnits].[Description].&[Unit1],[OrganizationUnits].[Description].&[Unit2]}
Thanks!!

Hi Arth81,
Please try the query below.
WITH MEMBER MEASURES.IsCURRENT AS [OrganizationUnits].[IsCURRENT].[IsCURRENT].CURRENTMEMBER.NAME
SELECT
{ [Measures].[Amount],MEASURES.IsCURRENT} ON COLUMNS,
{[OrganizationUnits].[Description].[Description].MEMBERS,
} ON ROWS
FROM
(SELECT [OrganizationUnits].[Description].MEMBERS ON 0
FROM
[CubeName]
WHERE(
{[OrganizationUnits].[Description].&[Unit1],[OrganizationUnits].[Description].&[Unit2]}
Regards,
Charlie Liao
TechNet Community Support

In 7u51, will all jars referenced by the applet need to be updated to include the Permissions Manifest attribute ? Or, will it be limited to the jar that contains the applet code ?

To whom it may concern,
According to Java RIA checklist(http://www.oracle.com/technetwork/java/javase/overview/ria-checklist-2055184.html),
as of 7u51(January 2014), Permissions Manifest attribute in main JAR file will be required.
But, at least, as of 7u45, when the Security Level slider is set to Very High,
a jar without Permissions Manifest attribute, which doesn't contain the applet code but is just referenced by the applet,
prevent the applet from running.
So, the question is:
In 7u51, does it mean that all jars referenced by the applet need to be updated to include the Permissions Manifest attribute ?
Or will it be limited to the jar that contains the applet code?
There is a concern that we will have to modify library jars that we do not control.
Sincerely,
Toshio Shiko

Thank you for your quick response and your investigation!
It do help us very much.
But, unfortunately, for the moment, I'm not allowed to test the early access version.
As soon as circumstances are changed, I' d like to test it.
Again, thank you for your providing of the useful information.

? Office 2013 to support Excel 2003 (XLS) spreadsheets containing VBA CommandBars references

Thanks in advance for reading this and offering any wisdom you have! I am not an expert in any of the following, so apologies if off base.
The basic problem is: I need to use Excel 2013 to support Excel 2003 (XLS) spreadsheets containing VBA 'CommandBars' references which don't seem to work in Excel 2013. Details below.
Most of our users are still using older desktop windows PCs and Office 2003! We are beginning to upgrade to laptops running Windows 8.1 with Office 2013. Of course, we IT technical people are using the new laptops first. These new laptops are
64 bit.
Years ago, someone did a lot of development with spreadsheets here in Excel 2003 file formats that automates many activities and routines. Now we with the new laptops are having to support this development using new machines.
There is a basic compatibility issue that appears when first opening these Excel 2003 files that have VBA code that I'll detail below; I seem able to get by that problem.
The current problem appears to be that the existing Excel 2003 VBA code has many references to: "For Each bar In Application.CommandBars". As I've learned, the Application.CommandBars VBA functionality is focused on older MS Office versions' menu
commands, but "...Starting from Office 2007 the Fluent UI is used instead." In other words, because MS Office isn't menu-driven beginning with version 2007 (uses 'the ribbon'), it appears that these references to: "For Each bar In Application.CommandBars"
create a basic incompatibility to opening these spreadsheets in Office 2013.
For a spreadsheet, after I resolve the issue detailed below and save it, when I reopen it I encounter error "Compile error: can't find project or library."
For example, the following code snippet:
Private Sub Workbook_Open()
For Each bar In Application.CommandBars
bar.Enabled = False
Next
results in: "Compile error: can't find project or library."
(Sorry, can't include images yet, I am not a VERIFIED USER of this forum yet.)
I went into VBE's menu: Tools>References and check for anything marked MISSING, which I deselected. But I am still receiving this error.
I don't want to get into changing the code a lot to support both Excel 2003 and 2013 (I am no VBA expert, just a dabbler).
And Microsoft officially says that Office 2003 is incompatible with Windows 8 although Application.CommandBars seem to be somewhat supported in Office 2013 .
Are you aware of a quick VBA workaround to get by this?
•I could comment out the validations, commands for: "For Each bar In Application.CommandBars" but then the spreadsheet code probably won't work for users using Office 2003.
Alternatives would be:
•Installing Office 2003 on my Win 8.1 64 bit laptop anyway, in spite of MS's saying incompatible, since this thread discusses at least one person has been able to use Office 2003
•Keeping one older PC with Office 2003 on it for us to support the old Office 2003 code until everyone upgrades their systems
Thanks
Basic compatibility issue that seems solvable:
Opening these spreadsheets displays this error:
Compile error:
The code in this project must be updated for use on 64-bit systems.
Please review and update Declare statements and then mark them with the PtrSafe attribute.
This seems resolvable by going into the VBA code and just adding element 'PtrSafe' where functions are declared; in other words, replacing VBA code "Declare Function" with "Declare PtrSafe Function" seems to get by this.

Hi Allan_L,
Please try the methods that provided above. And this is the forum to discuss questions and feedback for Microsoft Excel, your issue is related to Excel DEV, if you have further question, I recommend you post the question to the MSDN forum for Excel
http://social.msdn.microsoft.com/Forums/en-US/home?forum=exceldev&filter=alltypes&sort=lastpostdesc
The reason why we recommend posting appropriately is you will get the most qualified pool of respondents, and other partners who read the forums regularly can either share their knowledge or learn from your interaction with us. Thank you for your understanding.
George Zhao
TechNet Community Support
It's recommended to download and install
Configuration Analyzer Tool (OffCAT), which is developed by Microsoft Support teams. Once the tool is installed, you can run it at any time to scan for hundreds of known issues in Office
programs.

How to bind the attribute in the context to a dynamic created element?

Hi, experts,
There are some attributes in the node context(ee_node) that contained the attribute named "ANSSA" in the view(test_view) in the WDA for abap. In the method modifyview of the view(there is a transfered parameter that represent the name of "ANSSA")
I want to create a dynamic element(inputfield) in the test_view. The element need bind the context attribute (ANSSA).Through the transfered parameter(para), I only know the name of the attribute binded.
How can I bind the attribute of the context in the following code?
METHOD modifyview .
*importing para type string.
*importing m_view type ref to if_wd_view.
data wd_inputfield type ref to cl_wd_input_field.
create one element automatically in the view.
wd_inputfield = CL_WD_INPUT_FIELD=>NEW_INPUT_FIELD(
                                    view = m_view
                                    id = para
                                    BIND_VALUE = ???
ENDMETHOD.
I don't know how to replace the "???" in the method modifyview? Do you give me some hint for it?
You can reply back to me via e-mail if you think we should discuss this internally at [email protected] or [email protected]
Thanks.
Best regards,
tao

Hi, Suresh,
Thanks a lot for your help.
The last mail have some errors. Now, I modify my code error. The following is my new code in the wddomodifyview method in the ADDR_AUTO_DISP_VIEW view.
Now, I modify my code. The following is my new code in the wddomodifyview method in the ADDR_AUTO_DISP_VIEW view.
METHOD wddomodifyview .
importing view   type ref to if_wd_view.
DATA      transparent_container           TYPE REF TO cl_wd_transparent_container.
DATA      inputfield                      type ref to cl_wd_input_field.
transparent_container ?= view->get_element( `TRANSPARENT_CONTAINER` ).
transparent_container->set_visible(
    EXPORTING
      value = if_wdl_core=>visibility_visible ).
wd_this->SET_DYNAMIC_INPUT(
   EXPORTING
     inputfield_ID = 'ANSSA'
   IMPORTING
     INPUTFIELD    = inputfield
**************The web page will occur error when running the WDA as soon as I write the code.***********
transparent_container->add_child( THE_CHILD = inputfield ).
ENDMETHOD.
The following is the code of the SET_DYNAMIC_INPUT method.
method SET_DYNAMIC_INPUT .
*importing
*INPUTFIELD_ID    type STRING
*exporting
*INPUTFIELD    type ref to CL_WD_INPUT_FIELD
Data binded_context       type string.
concatenate 'ADDR_AUTO_DISP_VIEW.EE_ADDRESS.' INPUTFIELD_ID into binded_context .
inputfield = CL_WD_INPUT_FIELD=>NEW_INPUT_FIELD(
id = inputfield_id
read_only = abap_true
BIND_VALUE = binded_context
endmethod.
When I run the WDA, The web page occuring the error information:
Note
The following error text was processed in the system DEV : Access via 'NULL' object reference not possible.
The error occurred on the application server devserver_DEV_00 and in the work process 0 .
The termination type was: RABAX_STATE
The ABAP call stack was:
Method: IF_WDR_VIEW_ELEMENT_ADAPTER~SET_CONTENT of program /1WDA/L8STANDARD==============CP
Method: IF_WDR_VIEW_ELEMENT_ADAPTER~SET_CONTENT of program /1WDA/L7STANDARD==============CP
Method: IF_WDR_VIEW_ELEMENT_ADAPTER~SET_CONTENT of program /1WDA/L8STANDARD==============CP
Method: IF_WDR_VIEW_ELEMENT_ADAPTER~SET_CONTENT of program /1WDA/L8STANDARD==============CP
Method: IF_WDR_VIEW_ELEMENT_ADAPTER~SET_CONTENT of program /1WDA/L7STANDARD==============CP
Method: IF_WDR_VIEW_ELEMENT_ADAPTER~SET_CONTENT of program /1WDA/L8STANDARD==============CP
Method: IF_WDR_VIEW_ELEMENT_ADAPTER~SET_CONTENT of program /1WDA/L8STANDARD==============CP
Method: IF_WDR_VIEW_ELEMENT_ADAPTER~SET_CONTENT of program /1WDA/L7STANDARD==============CP
Method: IF_WDR_VIEW_ELEMENT_ADAPTER~SET_CONTENT of program /1WDA/L7STANDARD==============CP
Method: IF_WDR_VIEW_ELEMENT_ADAPTER~SET_CONTENT of program /1WDA/L8STANDARD==============CP
But when I delete the code of the wddomodifyview, and create a inputfield in the layout of the view, and bind the "ANSSA" to the "value" property in the layout, the WDA is running correctly.
Do you give me some hints?
Thanks a million.
Best regards,
tao

Deserializing cyclic reference with object resolution

I am attempting to deserialize complex objects containing cyclic references with an ObjectInputStream that implements the method resolveObject.
Of course, enableResolve(true) has been called in the constructor of the object input stream.
The problem I am seeing is that object resolution, when applied, is not propagated back to those objects that have been already deserialized and point to a "handle" object.
Is there a proper way to retroactively enforce object resolution?
Cheers,
Didier H. Besset

Hi Didier
I read your code, downloaded junit and ran your test. The test fails, so back to a few System.out.println statements!
I put a few into your code, see attached. Your deserialization is OK but your getComposite method returns the underlying referent and you are testing against the SoftReference!
Here's the output of the printlns - you can see the strings, objects and lists being resolved and the final "test" of printing out the objects you are comparing.
Resolving Beta
Returning Beta
Resolving Component@18f51f
Resolving name Beta
Returning ComponentReference@84ce7a
Resolving Gamma
Returning Gamma
Resolving Component@10fd7f6
Resolving name Gamma
Returning ComponentReference@12b6c89
Resolving [ComponentReference@84ce7a, ComponentReference@12b6c89]
Returning [ComponentReference@84ce7a, ComponentReference@12b6c89]
Resolving Alpha
Returning Alpha
Resolving Composite@1e2befa
Resolving name Alpha
Returning CompositeReference@1682598
CompositeReference@1682598 Composite@1e2befa
CompositeReference@1682598 Composite@1e2befaRegards
Tom

How can I access the Attribute Values from the Search Region

Hi all,
I have a table which contains Company id, department id, and PositonId. For a particular Company and Department there may be multiple records.
I have to pupulate a table which contains the position and other details that comes under a particular Department and Position based on the selection in the Three comboBoxes.
Also I have to populate a select many Shuttle to add new postions and records under a particular Department.
I created a query panel *(Search Region)* for the serch and a table to display the data. That is working fine.
Now the issue is I am using a view criteria to populate the shuttle with two bind variables ie, DepartmentId and CompanyId.
If the serach will return a resuktant set in the table it will also pupulate the correct records, otherwise ie, if the if the serch result is empty the corresponding iterator and the attribute is setting as null.
SO I want to access the attribute values from the Search Region itsef to populate the shuttle.
I don't know how can I access the data from the Search Region.
Please Help.
Regards,
Ranjith

you could access the parameters entered in search region by the user as follows:
You can get handle to the value entered by the user using queryListener method in af:query.
You can intercept the values entered as described
public void onQueryList(QueryEvent queryEvent) {
// The generated QueryListener replaced by this method
//#{bindings.ImplicitViewCriteriaQuery.processQuery}
QueryDescriptor qdes = queryEvent.getDescriptor();
//get the name of the QueryCriteria
System.out.println("NAME "+qdes.getName());
List<Criterion> searchList = qdes.getConjunctionCriterion().getCriterionList();
for ( Criterion c : searchList) {
if (c instanceof AttributeCriterion ) {
AttributeCriterion a = (AttributeCriterion) c;
a.getValues();
for ( Object o : a.getValues()){
System.out.println(o.toString());
//call default Query Event
invokeQueryEventMethodExpression("#{bindings.ImplicitViewCriteriaQuery.processQuery}",queryEvent);
public void onQueryTable(QueryEvent queryEvent) {
// The generated QueryListener replaced by this method
//#{bindings.ImplicitViewCriteriaQuery.processQuery}
QueryDescriptor qdes = queryEvent.getDescriptor();
//get the name of the QueryCriteria
System.out.println("NAME "+qdes.getName());
invokeQueryEventMethodExpression("#{bindings.ImplicitViewCriteriaQuery.processQuery}",queryEvent);
private void invokeQueryEventMethodExpression(String expression, QueryEvent queryEvent){
FacesContext fctx = FacesContext.getCurrentInstance();
ELContext elctx = fctx.getELContext();
ExpressionFactory efactory = fctx.getApplication().getExpressionFactory();
MethodExpression me = efactory.createMethodExpression(elctx,expression, Object.class, new Class[]{QueryEvent.class});
me.invoke(elctx, new Object[]{queryEvent});
Thanks,
Navaneeth

How to read the attribute of the xml file using jaxb

Thanks,
Buddy as i have a issue i have to read the xml file using jaxb and xml file contains this data and i have read the attribute like name , desc and action for a particular menu name pls tell the code how to do this it will be a great favour to me
thanx in advance
Rasool
<contextmenu>
<menu name='Lead' >
<menuitem name='newlead' desc='New Lead' action='/leads.do?dispatch=insert' />
<menuitem name='editlead' desc='Edit Lead' action='' />
<menuitem name='leadinfo' desc='Lead Information' action='' />
</menu>
<menu name='Cases' >
<menuitem name='' desc='' action='' />
<menuitem name='' desc='' action='' />
<menuitem name='' desc='' action='' />
</menu>
<menu name='Contact' >
<menuitem name='' desc='' action='' />
<menuitem name='' desc='' action='' />
<menuitem name='' desc='' action='' />
</menu>
</contextmenu>

What my program do is to get the encoding of XML files and convert them to UTF-8 encoding files, while I need this "encoding" information of the original XML document thus I can convert...
After reading specifications and JDOM docs, the truth turns to be disappointed, no function is provided to get this information in JDOM level 2(the current released one), while it's promissed that this function will be provided in JDOM level API....
Thanx all for your help and attention!!!

How to set the value of an array element (not the complete array) by using a reference?

My situation is that I have an array of clusters on the front panel. Each element is used for a particular test setup, so if the array size is three, it means we have three identical test setups that can be used. The cluster contains two string controls and a button: 'device ID' string, 'start' button and 'status' string.
In order to keep the diagrams simple, I would like to use a reference to the array as input into a subvi. This subvi will then modify a particular element in the array (i.e. set the 'status' string).
The first problem I encounter is that I can not select an array element to write to by using the reference. I have tried setting the 'Selection s
tart[]' and 'Selection size[]' properties and then querying the 'Array element' to get the proper element.
If I do this, the VI always seems to write to the element which the user has selected (i.e. the element that contains the cursor) instead of the one I am trying to select. I also have not found any other possible use for the 'Selection' properties, so I wonder if I am doing something wrong.
Of course I can use the 'value' property to get all elements, and then use the replace array element with an index value, but this defeats the purpose of leaving all other elements untouched.
I had hoped to use this method specifically to avoid overwriting other array elements (such as happens with the replace array element) because the user might be modifying the second array element while I want to modify the first.
My current solution is to split the array into two arrays: one control and one indicator (I guess that's really how it should be done ;-) but I'd still like to know ho
w to change a single element in an array without affecting the others by using a reference in case I can use it elsewhere.

> My situation is that I have an array of clusters on the front panel.
> Each element is used for a particular test setup, so if the array size
> is three, it means we have three identical test setups that can be
> used. The cluster contains two string controls and a button: 'device
> ID' string, 'start' button and 'status' string.
>
> In order to keep the diagrams simple, I would like to use a reference
> to the array as input into a subvi. This subvi will then modify a
> particular element in the array (i.e. set the 'status' string).
>
It isn't possible to get a reference to a particular element within an
array. There is only one reference to the one control that represents
all elements in the array.
While it may seem better to use references to update
an element within
an array, it shouldn't really be necessary, and it can also lead to
race conditions. If you write to an element that has the
possibility of the user changing, whether you write with a local, a
reference, or any other means, there is a race condition between the
diagram and the user. LV will help with this to a certain extent,
especially for controls that take awhile to edit like ones that use
the keyboard. In these cases, if the user has already started entering
text, it will not be overwritten by the new value unless the key focus
is taken away from the control first. It is similar when moving a slider
or other value changes using the mouse. LV will write to the other values,
but will not rip the slider out of the user's hand.
To completely avoid race conditions, you can split the array into user
fields and indicators that are located underneath them. Or, if some
controls act as both, you can do like Excel. You don't directly type
into the cell. You choose w
hich cell to edit, but you modify another
location. When the edit is completed, it is incorporated into the
display so that it is never lost.
Greg McKaskle

Get the attributes NAME and VALUE from an XML

I really love this forum :)
I load an XML an populate a Tree, from which I start to drag
items.
the xml looks like this:
<myTag attrName="attrValue"
otherAttrName="otherAttrValue"/>
var ds:DragSource = event.dragSource;
var var1:String =(event.dragInitiator as
Tree).value.@attrName;
-> the var1 variable has now: "attrValue"
my question is.. how can I get all the attributes' names? in
this example: attrName and otherAttrName (suppose I don't know the
structure of that xml node)
what about attributes values?
thank you!

The snippet below takes an xml node(nodeCur), loops over the
attributes list and builds an array that contains the attribute
name and value for each attribute. It comes from a sample app that
allows you to edit an xml file.
Sorry that the forum will remove the formatting
var aDPAttributes:Array = new Array();
var xlAttributes:XMLList = nodeCur.@*;
var attribute:Attribute;
for ( var i:int = 0; i < xlAttributes.length(); i++) {
aDPAttributes.push({name:xlAttributes [ i ]
.name(),value:xlAttributes [ i ] });
dgAttributes.dataProvider = aDPAttributes; //set the property
sheet dataProvider
Tracy

Error while adding XML Schemas with cyclic references

I have to use the 3rd party bunch of XML Schema files, but two of them reference each other, i.e. there are cyclic references. ESB displays a conflict in this case.
Is there any way to resolve the problem without changing source xsd-files?
My configuration is WebLogic Platform 9.2.1 + AquaLogic Service Bus 2.6

Our scenario is that the corporate data model (in UML) is transformed into XSD and delivered as several separate XSD files. Our modellers argue that cyclic references make sense in this context and are not forbidden by the standard.
We restructured the transformation so that only a single XSD file is delivered (~550K) but this is unwieldy, inflexible and ALSB is sloooooooooow when manipulating a schema of this size inside the console.

How to populate the attribute of the characteristics in Contract?

Hi Experts,
I need to populate the attribute "Truck Net Value" of the characteristics during the Contract creation with reference to Sales Order. Brief description of the scenerio:
We are using a variant material in the Sales Order. This material has different attributes which the end user need to populate during the SO creation. Now I have to create a Contract with reference to Sales Order. While creating the Contract with reference to Sales Order I want to populate the attribute "Truch Net Value" of the Sales Order with some value and update the Sales Order. So to update the attibute of the Sales Order during Contract Creation. Is there any function module that I can use for this purpose? I know where to write the code in the standard program? But I don't know how to populate the attibute?
Thanks
MAN

Hi,
Welcome to SCN!!!
After the contract is created, you can call the BAPI BAPI_SALESORDER_CHANGE along with COMMIT to change the order texts. Alternatively you can use FMs SAVE_TEXT and COMMIT_TEXT to change any kind of texts.
You can check the parameters to be passed by placing the breakpoints in these FMs, change and save the text manually from VA02 in the sales order.
Thanks,
Vinod.

Not able to change the name of the attribute of the Table operator.

We are trying to create OMB scripts to automate certain tasks. As a part of this, there is a requirement to change the attribute name of table operators (which by default gets the name of the column). It is possible to change the attribute name from the GUI. But I was not able to do the same using OMB Scripting. Here is the script I used.
OMBALTER MAPPING 'TEST' \
MODIFY ATTRIBUTE 'GEOGRAPHY_ID' OF GROUP 'INOUTGRP1' OF OPERATOR 'TEST' \
SET PROPERTIES(BUSINESS_NAME,PRECISION,DESCRIPTION) \
VALUES('MEMBER_ID',2,'MEMBER')
This script was to change the name of the attribute - GEOGRAPHY_ID of the table operator TEST.
From what I can make out from the Scripting reference, changing BUSINESS_NAME of the attribute should do the trick but it is not happening. The syntax looks correct as the precision of the column changes.
Am I missing something? Or is it a limitation or a bug?
I use OWB client 10.2.0.1.25 and OWB repository 10.2.0.1.0.

Hi!
I'm using successfully
OMBALTER MAPPING '$mapName' MODIFY ATTRIBUTE '$attrName' OF GROUP '$groupName' OF OPERATOR '$joinName' RENAME TO '$newName'
Regards,
Carsten.

The attribute dependencies contain a cyclic reference

Similar Messages

Maybe you are looking for