The Clone Database process has not finished 12 hours later!
On my WindowsXP system,I have made a Data Guard configuration with DGMGRL tool(without EM Grid Control). The current database is the primary database. I want to add a standby database. So, At first, I clone the current database using EM Clone Database tool. But the clone process has not finished after renning for 12 hours.
What is the reason? Is it normal?
To answer your question then. No, you do not need an SGA size >=800MB to clone the database. You may want to increase the SGA on the clone database to speed up the clone process if possible. 500MB isn't much memory for a database server. What is the size of the SGA on the source database?
Similar Messages
-
As soon as I enter my user name and password for mobile me the process of "loading mail" begins. It never finishes
We are fellow users here on these user-to-user forums, you're not talking to iTunes Support nor Apple.
Is the credit card registered to exactly the same name and address (including format and spacing etc) that you have on your iTunes account, it was issued by a bank in your country and you are currently in that country ? If it is then you could check with the card issuer to see if it's them that are declining it, and if not then try contacting iTunes support and see if they know why it's being declined : http://www.apple.com/support/itunes/contact/ - click on Contact iTunes Store Support on the right-hand side of the page, then Account Management
Each time that you add or change your card details then a temporary store holding charge may be applied to check that the card details are correct and valid (though that is usually $1 or the approximate local equivalent) : http://support.apple.com/kb/HT3702
Did your daughter owe any amounts to iTunes ? Does anything show on your purchase history : http://support.apple.com/kb/HT2727 ? If they are proper charges which you don't think that you should have then you can contact iTunes Support via this page : http://www.apple.com/support/itunes/contact/ - click on Contact iTunes Store Support on the right-hand side of the page, then Purchases, Billing & Redemption -
Payment Processing Temporarily not available, try again later.
Hey Guys,
I might have a solution for the folks who are getting the error "Payment Processing Temporarily not available, try again later".
If you have an active credit card and trying to purchase/register in the iTunes store this error pops up. On contacting support, they will tell you to check with the bank and they will also suggest an alternative solution for this(purchasing an iTunes Gift Card).
My Perspective on the Problem:
The bank or the service which Apple is using to process your card is not a 24hrs service. I am not aware if the same problem is being faced in US, Canada & UK. But seeing the previous discussions on this error, most of the Apple users in India and other countries are facing this. I reside in India and I have faced this problem.
My Proposed Solution:
Try registering your card after 9.30am GMT. I was trying to register my card all day long and as soon it was 3am IST, my card got processed and I was able to make purchase on iTunes. So, 3am IST is 9.30am GMT. 9.30am GMT must be the opening time for the day at the bank/service which apple uses to bill users. So, 8 hrs from 9.30am GMT should be the time you should try to use your card on iTunes.
Apple should take care of this.I had this happen earlier this week - thought perhaps it was a Netflix problem.when it contined the next day, I looked for a reset button - there isn't one. So, I just pulled one of the plugs out from the back of the Apple TV, waited a second and plugged it back in. Worked like a charm and could now watch my movie.
-
I recently got the new iPhone 5c I used icloud to back everything up from my 4s to my new 5c. Now, I keep getting a pop up that says Continue Restoring? (This iPhone has not been backed uprecently because it has not finished being restored. Would you like to finish downloading any remaining purchases and media before backing up, or delete them along with any app date?)
I seleted to finish downloading because I didn't want to lose anything. It still will not finish downloading and I have tried this several times.
What do I need to do to that I can get my iphone to back up and so that I can install the new iOS?Hello there, Brandifoote24.
The following Knowledge Base article offers up an explanation of what you're error signifies:
iCloud: Understanding Backup alert messages
http://support.apple.com/kb/TS4576
"This iPhone has not been backed up recently because it has not finished being restored. Would you like to finish downloading any remaining purchases and media before backing up, or delete them along with any app data?"
This message is displayed if your iOS device has been trying to complete a restore for more than three days. This can occur if your restore has been interrupted due to network connectivity issues or some other problem occurs.
Being that this is the case, you would want to go back to the article it seems you were referred to us from and try to restore from your icloud backup again:
iCloud: Troubleshooting restoring an iCloud backup
http://support.apple.com/kb/TS4036
How do I restore an iCloud backup if my device is already set up for use?
You'll need to erase all data and settings from your device, so first confirm that you have an iCloud backup to restore:
Go to Settings > iCloud > Storage & Backup > Manage Storage, then tap the name of your device to view a list of iCloud backups.
Check the date of the backup you want to restore, because you'll be restoring only what iCloud backed up on that date.
After confirming that an iCloud backup is available, follow these steps:
Connect your device to a power source and make sure that it is connected to the Internet via Wi-Fi.
Follow the instructions for restoring your iOS device from an iCloud backup, which include making sure that your device is using the latest version of iOS.
If the issue persists, then I would troubleshoot Wi-Fi using the following article:
iOS: Troubleshooting Wi-Fi networks and connections
http://support.apple.com/kb/ts1398
Thanks for reaching out to Apple Support Communities.
Cheers,
Pedro. -
I bought the game from the iTunes process has not been completed?
I bought the game from the iTunes process has not been completed?
If you are getting a message to contact iTunes support to complete it then you can contact them via this page (these are user-to-user forums) : http://www.apple.com/support/itunes/contact/ - click on Contact iTunes Store Support on the right-hand side of the page
-
Hello,
When I connect my iPhone 4S to my MacBook Pro (through the USB port), the synchronization process by iTunes failed with the following message "My iPhone could not be synchronized, because the synchronization process has not started".
What does that mean?
Thanks in advance for fixing my problem.I think I remember hearing that if you quit iTunes with your device still connected, then open iTunes up again, it should work.
EDIT: Here, this might help: http://support.apple.com/kb/ts1567 -
How to display a mssg on page before the adf lifecycle process has ended?
Hi;
We have an ADF Application(11.1.1.3). We sign a document with a mobile signature. To do this we use a webservice call. During this call a hash is generated for the user to check and sign the document. Everything is fine but we couldn't find a way to display the generated hash on the page before the adf lifecycle process has finished. The hash should be displayed on the screen while the rest of the method is proceeding. After 2 minutes, the hash is timed out. How can we do this?
The method is as follows:
public boolean docFirstSign(String telNo, int gsmOperator, String evrakNo) {
String filePathToSign = null;
boolean signOpResult = false;
FileProcessor fileP = new FileProcessor();
try {
filePathToSign = fileP.getFilePathToSign(evrakNo);
byte[] imzalanacakVeri = MobilImza.getBytesFromFile(filePathToSign);
String dataToBeDisplayed = "Size atanmis ve evrak uygulamasi uzerinden goruntulediginiz "+ evrakNo +" numarali evraki mobil olarak imzalayacaksiniz!";
MSS_SenderSoapProxy proxy = new MSS_SenderSoapProxy();
HashResult res = proxy.getHashForGsmOperator(imzalanacakVeri, telNo, 1);
Here the hash is generated. This should be displayed on the page, as at the same time a mobile message is sent to the user to check it and sign it. And the method shoud go on processing.
Logging.getLogger().info("Message -->"+res.getMessage());
//Hash kontrol
if (res.getResultCode()==0) {
SignatureResult sres = proxy.getSignature(dataToBeDisplayed,res.getApTransId()); //Turkce karakter olmayacak
Logging.getLogger().info("sres.getResultCode()-->"+sres.getResultCode());
if (sres.getResultCode()==0) {
byte[] imzaliData = MobilImza.base64Decode(sres.getSignedData());
System.out.println(sres.getMessage());
FileOutputStream fos = new FileOutputStream(new File(filePathToSign));
fos.write(imzaliData);
fos.close();
signOpResult = fileP.docCheckin(evrakNo);
} else {
fileP.cancelCheckout(evrakNo);
} else {
Logging.getLogger().error("Hash Hesaplanamadi");
fileP.cancelCheckout(evrakNo);
return signOpResult;
} catch (Exception e) {
e.printStackTrace();
fileP.cancelCheckout(evrakNo);
return signOpResult;
return signOpResult;
}Hi,
its a synchronous method execution which means that the display of a popup only works when there is a response to the initial request. What about - as soon as you generated the Hash - show a popup to the user asking him/her to take a note of the hash and then confirm that the document or whatever you want to sign and send to the mobile should be processed. So when the user clicks ok on the message dialog you continue with the remaining of your method
Frank -
Data Package 1 arrived in BW ; Processing :2nd processing step not finished
I am currently working on BI 7 and trying to pull data from r/3.
I have succesfully loaded the data into the PSA and now when i try updating the data (only 66 records, its a init run) into an ODS, but the system is taking a long time. On monitor Details in
Extraction:Errors occured.(with a delta warning sign), and
Transfer:Data Package 1 arrived in BW ; Processing :2nd processing step not finished.
On status Tab its yellow with message : Correct data request; processing running.
Hope i have made it clear.Please help.Hi,
I will suggest you to check a few places where you can see the status
1) SM37 job log (give request name) and it should give you the details about the request. If its active make sure that the job log is getting updated at frequent intervals.
2) SM66 get the job details (server name PID etc from SM37) and see in SM66 if the job is running or not.
3) RSMO see what is available in details tab. It may be in update rules.
4) ST22 check if any short dump has occured.
Once you identify you can rectify the error.
If all the records are in PSA you can pull it from the PSA to target. Else you may have to pull it again from source infoprovider.
If its running and if you are able to see it active in SM66 you can wait for some time to let it finish. You can also try SM50 / SM51 to see what is happening in the system level like reading/inserting tables etc.
If you feel its active and running you can verify by checking if the number of records has increased in the new data table. -
The iChat Agent process has unexpectedly quit, disconnecting you from all..
My iChat has been doing this all the time! I can't stay connected for more than an hour without iChat quitting on me and giving me this message:
*"Disconnected from iChat Agent. The iChat Agent process has unexpectedly quit, disconnecting you from all services. Logging in again will restart it."*
I have tried these steps to fix the problem with no success.
Step 1 - Repaired Permissions
Step 2 - Rebooted off of the DVD or CD and Repaired Disk
Step 3 - Went to /Users/user_name/Library/Preferences folder and deleted these files:
com.apple.iChat.plist
com.apple.iChat.Aim.plist
com.apple.iChat.Jabber.plist
com.apple.iChat.SubNet.plist
com.apple.iChatAgent.plist
Step 4 - Reinstalled the **** thing.
My iChat works 100%, I have no issues connecting, video conferencing, screen sharing and etc. But every hour or so the connection drops and gives me that **** message!!! *"Disconnected from iChat Agent. The iChat Agent process has unexpectedly quit, disconnecting you from all services. Logging in again will restart it."* So have to keep reconnecting all the time! Sometimes I'm in a middle of a conference and the freackn' thing just drops!!!! (Even tho sometimes I do get that error but my video connection still works offline.... not sure how....)
I have been in several forums and no one was able to fix this issue! Can some official Apple guy help with this!!! I mean, ****!! What an annoying bug!! I really on iChat to communicate with co-workers and etc as I work remotely. If Adium had video support I wouldn't even wast my time to get this thing working, but iChat is still my best option(when the **** thing works)
Please any help is greatly appreciated.
And no its not my router and ISP and this happens with any connection(Coffee shops, public libraries, WiFi Hot Spots....)I had the same problem a month or two ago. I spent a few hours on the phone with an Apple tech and after the fourth time calling back was transferred to a Product Specialist (the highest level of Apple technicians). The specialist recommended creating a test account on my Mac and trying to launch iChat to see if the problem was system-wide or a user based issue. When that didn't work I was out of options. What it unfortunately came down to was having to do an Archive and Install (which didn't work) and after hours of backing up did an Erase and Install. After all the smoke cleared and my computer was back to normal, iChat was back and fully functional as before.
IF YOU ARE USING TIME MACHINE:
*DO NOT* copy all of your files back onto your Mac. Only copy your documents and music, preferences and nothing else. Chances are you backed up the problem without even knowing it and you would just end up back where you started.
I did notice that my .Mac account still works in iChat but AIM does not (which just happens to be what I use to communicate with the rest of the world).
Good Luck! -
Hello
My system version 10.5.8
I have installed Safari update - 5.0.6 and the browser stopped working. At openingit shows the following icon:
"Safari has suddenly finished working. Possible problem is in the action of the plugin "TastyAppsAVPlugin".
After deleting all plugins from the folder "Internet Plugin", Safari worked again no problem, BUT all sites with flash content (e.g.YouTube) did not work.
I then tried the following experimental steps:
a) Moved all plugins from the folder "Internet Plugin" into a temporary folder.
b) Downloaded and istalled Adobe Flash Player version 10.3.181.34
c) Started Safari and it did not work ( same message"TastyAppsAVPlugin")
d) Deleted Adobe Flash Player from the folder "Internet Plugin". Safari worked.
e) Moved back all plugins, except Adobe Flash Player, from the temporary folder to "Internet Plugin" folder. Safari works... But Flash won't work!!! Before update to Safari 5.0.6 , ev erything worked perfectly well.
Guys, please solve the problem
Regards
Ruslan Reed
[email protected]MayaMa --
There are many threads on this. I typed "Uninstalling TastyApps" in the Google search, and came up with these:
http://www.google.com/search?client=safari&rls=en&q=Uninstalling+tastyapps&ie=UT F-8&oe=UTF-8
I do not know which of the many TastyApps haxies you have. Perhaps it would be better to contact them directly, once you know which of their products you have. -
Hello,
Often, the Firefox app will close, but the underlying Windows process will not and cannot be stopped via Task Manager. When this happens, Firefox can no longer be used...the system must be rebooted. This happens especially when many apps are running but even though there are plenty of memory resources available.
I have tried to find if something is using Firefox in the background, but have no way to know what that would be.
Their are no apparent viruses detected.
Firefox is version v5.0 and occurred in earlier release.
System is Windows 7 (64bit).well, it's not the same hardware and it's a bit different.
I managed to pass that stage somehow but I still have a problem
I don't use the built-in creator tool that comes with Spyrus as it doesn't know how to append a pre-staged media that was created by SCCM that should apply the Windows file system to a second partition and the WinPE to the first partition.
I managed to do everything. my only problem is that the WTGCreator that comes with SCCM 2012 R2 creates the 350MB partition with FAT32 file system.
when I boot from the device I get the WinPE, I can choose a task sequence and then it fails when trying to apply the wim file. the error tells me that the 350MB partition is FAT32 which is not supported (even though it chooses the second partition, which
is all the rest of the disk space)
what I did was adding another task that converts the 32 Fat partition to an NTFS partition and then the process continues and finishes successfully! but that's a workaround.
I'm trying to make this process as smooth as possible without having additional steps
Tamir Levy -
when i try to update my itunes on my pc i keep getting the messaage that there was a problem with the installer and it could not finish. how do i fix this? i`ve tried to download 3 times already.
Hi
I've got a similar problem. iTunes v10.2 worked fine, but when I tried to update it to 10.5 I got a 'Bonjour' error. I eventually solved that but I still couldn't upgrade to 10.5, so I deleted every single Apple, Quicktime, iTunes, etc file on my PC using Revo Unistaller (because the normal Windows Add/Delete programs wouldn't work) but now, when I install the latest iTunes version from scratch (on XP SP3), it says: "the installer encountered errors before it could be configured.... your system has not been modified"
Any ideas?
Rick -
The current user username has not been granted the ADVISOR privilege despite having it !
Hi,
I'm trying to follow ML note 2499931.1 'Using Dbms_Advisor.Tune_Mview To Optimize Materialized Views For Fast Refresh' and am receiving an error suggesting the user4 does Not have the Advisor privilege
despite the fact that it does. What am I missing ?
Every note I've found so far suggests granting the privilege is the fix.
I have and continue to receive the error.
Version 11.2.0.3 on Redhat 5
select * from dba_sys_privs where grantee = 'SOAUSER';
GRANTEE PRIVILEGE ADM
SOAUSER CREATE MATERIALIZED VIEW NO
SOAUSER CREATE VIEW NO
SOAUSER CREATE PUBLIC SYNONYM NO
SOAUSER SELECT ANY DICTIONARY NO
SOAUSER ON COMMIT REFRESH NO
SOAUSER CREATE ANY DIRECTORY NO
SOAUSER CREATE DATABASE LINK NO
SOAUSER SELECT ANY TABLE NO
SOAUSER ADVISOR NO
SOAUSER UNLIMITED TABLESPACE NO
SOAUSER CREATE SESSION NO
Error at line 2
ORA-13616: The current user SOAUSER has not been granted the ADVISOR privilege.
ORA-06512: at "SYS.PRVT_ADVISOR", line 4869
ORA-06512: at "SYS.DBMS_ADVISOR", line 1969
ORA-06512: at "SYS.PRVT_TUNE_MVIEW", line 490
ORA-06512: at "SYS.PRVT_TUNE_MVIEW", line 970
ORA-06512: at "SYS.DBMS_ADVISOR", line 739
ORA-06512: at line 3
Thanks in Advance
KenSorry, but the code I was receiving the error message for is essentially the same as the example in the note. Assumed people would have access to the note.
The statement is:
variable foo varchar2(20);
declare foo varchar2(20) := 'ken_foo';
begin
dbms_advisor.tune_mview(:foo,
'create materialized view ken_foo
as
select
papf.rowid R_papf,
paaf.rowid R_paaf,
gcc.rowid R_gcc,
papf.employee_number,
gcc.segment4 cost_center
from hr.per_all_people_f@atc_pp_to_ebs_atcllc papf,
hr.per_all_assignments_f@atc_pp_to_ebs_atcllc paaf,
gl.gl_code_combinations@atc_pp_to_ebs_atcllc gcc
where papf.person_id = paaf.person_id
--and trunc(sysdate) between papf.effective_start_date and papf.effective_end_date
--and trunc(sysdate) between paaf.effective_start_date and paaf.effective_end_date
and paaf.default_code_comb_id = gcc.code_combination_id');
end;
Per another forum the answer appears to be that sys didn’t have the advisor privilege.
Granted advisor to sys and ran the statement again as soauser and no error.
Thanks
Ken -
I updated my ipad but had to skip the update to the icloud because it was not finished within 2 hours. The ipad worked fine then, but I turned it off. When I tried to turn it on again, it kept asking for the password over and over. What do I do now?
iOS: Device disabled after entering wrong passcode
http://support.apple.com/kb/ht1212
How can I unlock my iPad if I forgot the passcode?
http://tinyurl.com/7ndy8tb
How to Reset a Forgotten Password for an iOS Device
http://www.wikihow.com/Reset-a-Forgotten-Password-for-an-iOS-Device
Using iPhone/iPad Recovery Mode
http://ipod.about.com/od/iphonetroubleshooting/a/Iphone-Recovery-Mode.htm
Saw this solution on another post about an iPad in a school enviroment. Might work on your iPad so you won't lose everything.
~~~~~~~~~~~~~
‘iPad is disabled’ fix without resetting using iTunes
Today I met my match with an iPad that had a passcode entered too many times, resulting in it displaying the message ‘iPad is disabled – Connect to iTunes’. This was a student iPad and since they use Notability for most of their work there was a chance that her files were not all backed up to the cloud. I really wanted to just re-activate the iPad instead of totally resetting it back to our default image.
I reached out to my PLN on Twitter and had some help from a few people through retweets and a couple of clarification tweets. I love that so many are willing to help out so quickly. Through this I also learned that I look like Lt. Riker from Star Trek (thanks @FillineMachine).
Through some trial and error (and a little sheer luck), I was able to reactivate the iPad without loosing any data. Note, this will only work on the computer it last synced with. Here’s how:
1. Configurator is useless in reactivating a locked iPad. You will only be able to completely reformat the iPad using Configurator. If that’s ok with you, go for it – otherwise don’t waste your time trying to figure it out.
2. Open iTunes with the iPad disconnected.
3. Connect the iPad to the computer and wait for it to show up in the devices section in iTunes.
4. Click on the iPad name when it appears and you will be given the option to restore a backup or setup as a new iPad (since it is locked).
5. Click ‘Setup as new iPad’ and then click restore.
6. The iPad will start backing up before it does the full restore and sync. CANCEL THE BACKUP IMMEDIATELY. You do this by clicking the small x in the status window in iTunes.
7. When the backup cancels, it immediately starts syncing – cancel this as well using the same small x in the iTunes status window.
8. The first stage in the restore process unlocks the iPad, you are basically just cancelling out the restore process as soon as it reactivates the iPad.
If done correctly, you will experience no data loss and the result will be a reactivated iPad. I have now tried this with about 5 iPads that were locked identically by students and each time it worked like a charm.
~~~~~~~~~~~~~
Try it and good luck. You have nothing more to lose if it doesn't work for you.
Cheers, Tom -
Hello experts,
I have deployed all essential RDS roles and features on one Windows Server 2012 Virtual Machine
a few months ago and I recently ran into issues with users not being able to access it through RDP all of a sudden after entering credentials successfully.
Every time that happens I get an event ID Winlogon 4005 (The Windows logon process has unexpectedly
terminated). I am also receiving but not all the time event ID 6000 and 6003 referring to being unable to handle critical or normal events from AUinstallAgent.
Any help on this problem would be greatly appreciated.
Thank you in advance for your support.
MassimilianoHello experts,
I have deployed all essential RDS roles and features on one Windows Server 2012 Virtual Machine
a few months ago and I recently ran into issues with users not being able to access it through RDP all of a sudden after entering credentials successfully.
Every time that happens I get an event ID Winlogon 4005 (The Windows logon process has unexpectedly
terminated). I am also receiving but not all the time event ID 6000 and 6003 referring to being unable to handle critical or normal events from AUinstallAgent.
Any help on this problem would be greatly appreciated.
Thank you in advance for your support.
Massimiliano
Maybe you are looking for
-
Error in phase XPRA_EXECUTION while updating the SAP_BASIS patch !4
Hi , I am trying to update the sap_basis patch from level 13 to 14 . While updating I am getting Error in phase: XPRA_EXECUTION Reason for error: TP_STEP_FAILURE Return code: 0012 Error message: OCS Package SAPKB70014, tp step R, return code 0012 In
-
How can I move from the text body to the inspector in voiceover - need to change spacing
I want to get to the inspector (for formatting text in Pages), but cannot seem to find the correct keystrokes. After marking text, I would like to double space (or go from double spacing back to single spacing).
-
Hi Guys, Is there any document explaining the integration between Account-based COPA and FI-SL? Regards.
-
Default the SAPscript name as custom script name in ME6F selction screen
In the standard transaction ME6F , I have developed a custom SAPscript , z_meldruk. Now , the requirement is that while running the ME6F transaction instead of standard script MELDURK , the custom script Z_MELDRUK should come as default value in the
-
Running out of disk space - External Drive Advice
Hi, I've been importing all of our HDV video in "Large" fomat (Not the original or full size). We have an Apple TV so wanted to get the qaulity up for our large TV. Anyway, we have lots of digital pics, huge iTunes library and now I'm starting to run