The connection between ADM and Essbase Server is lost?

I can login essbase server with MaxL, excel spreadsheet, the Essbase Administration Service is started by command line and it shows running fine, But I cannot login to Essbase through ADM console, the error message is: Could not connect to the Administration Server
thanks!

You really should change your architecture. I assume that your other controls also control the robot, so you will need more complex messaging.
I suggest you look at some of the examples and templates for queued message handler. Essentially, this will allow you to send message between two loops, which is probably what you want.
As for what your comm loop should actually look like, you should separate the opening part from the communicating and closing part. That way, you can send the Ready string immediately after connecting. The example code you used already handles the timeout error, which is the indication you want that the connection was lost.
Here's one (very bad) example of how this could be done:
You should note that this does not really do any error handling. If you use a queued message handler and actually turn the comm loop into a state machine (with states like Open,Comm and Close), it should be cleaner.
To learn more about LabVIEW, I suggest you try looking at some of these tutorials.
Message Edited by tst on 01-19-2008 07:53 PM
Try to take over the world!
Attachments:
Comm.png ‏7 KB

Similar Messages

Configuration the connection between portal and srm server only via JDBC

Dear all:
   We want to implement the SRM server and present the supplier web/page in the portal server. Our SRM and portal server install in intranet network.
   For internal employee use the SRM server and the Supplier access the portal server via Internet, we install Web Dispather in DMZ to exchange the HTTP request.
     Network TOP like this :
    SRM server--Portal||FireWall||-Web Dispatcher--Supplier
(--Internal|firewall--|DMZ|-Internet )
The question is : Between DMZ zone and our internal network zone ,there is the firewall and it only allows JDBC protocol (SQL statements or result set) to pass. Other protocol and port could not pass this firewall.
So ,it seems that no way to implement this ,right? Or any other way to implement it ?

thanks

I am having problems connecting my imac to a Kodak printer wirelessly. This was previously working fine. The printer states it is connected to the home network but the connection between computer and printer has been lost/ cannot find printer.

In addition, I contacted kodak support and they wished to take control of my computer in order to rectify the problem. I did not allow this as I was worried about security . Can anyone tell me whether once you allow someone to take control of your computer, then it is a security risk. What protection does my imac provide ? Thanks.

I think you can do it on a one time basis, & not allow after that.
Mac OS X: About the Reset Printing System feature ...
http://support.apple.com/kb/HT1341?viewlocale=en_US
10.5/10.6/10.7/10.8 instructions...
In System Preferences>Fax & Print, Right click or Control+click on the Printers list Sidebar, choose Reset Printing System.
if you hold option and click the "-" tab it resets the printing system.
http://www.macosxhints.com/article.php?story=20031215144430486
Safe Boot from the HD, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions.
Any devices that previously appeared in your Printer List and Fax List will need to be added again after resetting the printing system.
Resetting the printing system in Mac OS X 10.5.x+++
    1.    To use the Reset Printing System feature in Mac OS X 10.5.x, follow these steps:
    2.    Choose System Preferences from the Apple menu.
    3.    Choose Print & Fax from the View menu.
    4.    Control-click on list of printers on the left side of the window, then choose "Reset printing system" from the contextual menu. If you don't see a list of printers, Control-click on the text "Click + to add a printer or fax" and select "Reset printing system..."       As an alternative, if you currently have one or more printers listed, you can Option-click the "-" (Remove printer) button.
http://support.apple.com/kb/ht1341
Reboot.

Can someone please tell me a simple but effective method for burning a slideshow to DVD? Now that the connection between iPhoto and iDVD no longer exists, I can't figure out a way to get there with an acceptable quality result.

Can someone please tell me a simple but effective method for burning a slideshow to DVD? Now that the connection between iPhoto and iDVD no longer exists, I can't figure out a way to get there with an acceptable quality result.

Export the slideshow out of iPhoto as a QT movie file via the Export button in the lower toolbar. Select Size = Medium or Large.
Open iDVD, select a theme and drag the exported QT movie file into the open iDVD window being careful to avoid any drop zones.
Follow this workflow to help assure the best qualty video DVD:
Once you have the project as you want it save it as a disk image via the File ➙ Save as Disk Image menu option. This will separate the encoding process from the burn process.
To check the encoding mount the disk image, launch DVD Player and play it. If it plays OK with DVD Player the encoding is good.
Then burn to disk with Disk Utility or Toast at the slowest speed available (2x-4x) to assure the best burn quality. Always use top quality media: Verbatim, Maxell or Taiyo Yuden DVD-R are the most recommended in these forums.
If iDVD was not preinstalled on your Mac you'll have to obtain it by purchasing a copy of the iLife 09 disk from a 3rd party retailier like Amazon.com: ilife 09: Software or eBay.com. Why, because iDVD (and iWeb) was discontinued by Apple over a year ago.
Why iLife 09 instead of 11?
If you have to purchase an iLife disc in order to obtain the iDVD application remember that the iLife 11 disc only provides themes from iDVD 5-7. The Software Update no longer installs the earlier themes when starting from the iLIfe 11 disk nor do any of the iDVD 7 updaters available from the Apple Downloads website contain them.
Currently the only sure fire way to get all themes is to start with the iLife 09 disc:
This shows the iDVD contents in the iLife 09 disc via Pacifist:
You then can upgrade from iDVD 7.0.3 to iDVD 7.1.2 via the updaters at the Apple Downloads webpage.
OT

How to establish the connection between crm and r/3

Hi,
Sorry for posting this question in this forum, i did not find any CRM forums.My question is,How to establish the connection between CRM and R/3...in my office i installed standard alone CRM system,but it is not talking to R/3.
Could any one tell me where to find adapters and plugins for this.
Thanks in advance.
Ajey

Hello Ajey,
in the case you mean the connection between R/3 and SAP CRM you should read the Best Practice Guides:
B01: CRM Generation
C71: CRM Connectivity
B09: CRM Replication
from http://help.sap.com/bp_crmv240/index.htm. There is a CRM Forum at http://www.sap.com/community/ and also at http://www.sapfans.com/.
Regards
Gregor

Whats the difference between EPMA and Essbase Studio

Aren't they both used for designing applications?
And do one really need Essbase Studio?

Whats the difference between EPMA and Essbase Studio ^^^It is a bit confusing, isn't it? As far as I understand EPMA's role, it's a way to share common dimensions and data across multiple Oracle EPM products including Essbase, Planning, and HFM. I actually don't know if other products live in EPMA. What EPMA does not have is a nice way of sourcing or manipulating dimension and fact tables (or even files). Oh, there are interface tables, but you will write code/use the EPMA dimension utility to load dimensions. I have to say I've never tried to load data through EPMA so someone else is going to have to comment on that. Once dimensions are built, you can deploy Essbase (and other products) from common and database-specific dimensions.
Studio is the tool you would use to go against a data warehouse, or something awfully close to a data warehouse to build Essbase databases. It's for Essbase only -- Planning, HFM, etc. are not the targets of Studio's output.
What gets confusing/intriguing is that when EPMA deploys Essbase apps, it uses Studio under the covers to do so. Thus the interesting implementations where people use Studio (which is way more flexible than EPMA because it is a development tool as opposed to a dimension/data management app) to read the EPMA interface tables (and for all I know, the base EPMA tables) and build Essbase apps that way.
If you think there is overlap, I would agree with you, but you can see they really aren't the same.
And do one really need Essbase Studio?^^^You don't have to use Studio to build Essbase databases. You can go hog-wild in EAS with SQL load rules if you want, although at some point it probably will be easier/more straightforward to build it in Studio. Although Studio has been mentioned as the replacement for EAS for some time, I suspect the effort required to build a database in Studio will keep EAS around for quite a while or Studio Lite will have to come out. There's a lot to be said (sometimes) for the amazing flexibility EAS/Essbase have -- Studio requires a more methodical approach and EPMA has a very formal set of standards and methods.
Whew, I'm sorry, I wrote a book about this and I'll bet you get a bunch of differing opinions on this.
If you're interested in Studio, you might do well to pick up a copy of Glenn Schwartzberg's "Look Smarter Than You Are with Oracle Essbase Studio 11". I receive not a penny from its sale although I was one of the copy editors (hey, I got a mention in the acknowledgements). It's a good book and an excellent introduction to the tool.
Regards,
Cameron Lackpour

Do connections between Outlook and Exchange Server continue to sync without proper DNS?

Hi there,
We were acquired by an other company that uses Office365.com, so we are moving accounts over from Intermedia, our existing provider, to your service. My question is this: If i point our MX records over to Office365, will we be able to work with the old calendar
and email items using the existing connection between Outlook and Intermedia Exchange? I understand that no new external mail will be delivered to the Intermedia accounts, but will we still have access to the existing items in the old mailbox as long as we
have the Intermedia accounts?
My plan is to receive new mail at Office365.com while taking our time to copy over old emails from the Intermedia folder to Office 365 folders.
Thanks,
Jeff

Hi,
According to your description, your accounts are moved from on-premise Exchange server to Exchange online server and you have the doubt about the availability of calendar and emails through the on-premise Exchange server.
However, since it’s related to Exchange online, to get more professional and quicker help, I recommend you post it on our Exchange online forum, as Ed said.
If you have any question, please feel free to let me know.
Thanks,
Angela Shi
TechNet Community Support

Build the connection between Arduino and Flex 4.0 via JSON

Hi,
I try to make a connection between arduino and Flex 4.0, I included the JSON lib and also as3corelib.swc to Flex. When I run the Flex file the connection between PC to arduino is working (I can see it in SERPROXY window) and also I don't have any problems in Flex window, I added the SWF file of Flex to the list at //http://www.macromedia.com/support/documentation/tr/flashplayer/help/settings_manager04.htm l, Bu the reading result is not shows in the SWF,    I couldn't understand why !, thanks for help
here the code
package
import com.adobe.serialization.json.JSON;
import flash.display.Sprite;
import flash.errors.*;
import flash.events.*;
import flash.net.Socket;
import flash.text.TextField;
public class deneme extends Sprite
{private var magnetic:Socket=new Socket("localhost",5331);
private var magneticValue:Number=0;
private var distance:Number;
private var newText:TextField=new TextField();
private var listText:TextField=new TextField();
private var MNx:Number;
private var MNy:Number;
private var MNz:Number;
private var d:Object={"x":null, "y":null, "z":null};
public function deneme()
   socketDataHandler();
private function socketDataHandler():void
   newText.text=magnetic.readUTFBytes(magnetic.bytesAvailable);
   d= JSON.decode(newText.text);
   MNx=d["x"];
   MNy=d["y"];
   MNz=d["z"];
   listText.x=10;
   listText.y=10;
   listText.width=600;
   listText.height=100;
   listText.text=newText.text;
   addChild(newText);

package
{    import com.adobe.serialization.json.JSON;
import flash.display.Sprite;
import flash.errors.*;
import flash.events.*;
import flash.net.Socket;
import flash.text.TextField;
import mx.rpc.events.ResultEvent;
    public class deneme2 extends Sprite
        private var newText:TextField=new TextField();
        private var listText:TextField=new TextField()
        private var magnetic:Socket=new Socket("localhost",5331);
        private var MNx:Number;
        private var MNy:Number;
        private var MNz:Number;
        private var d:Object={"x":null, "y":null, "z":null};
        public function deneme2()
             magnetic.addEventListener(ProgressEvent.SOCKET_DATA,getDATA);
         private function getDATA(event:ProgressEvent):void
            newText.text=magnetic.readUTFBytes(magnetic.bytesAvailable);
            d= JSON.decode(newText.text);
            MNx=d["x"];
            MNy=d["y"];
            MNz=d["z"];
            listText.x=10;
            listText.y=10;
            listText.width=600;
            listText.height=100;
            listText.text="X="+String(MNx)+" Y="+String(MNy)+" Z="+String(MNz);
            addChild(listText);

PLEASE HELP. The connection between invoices and notifications

Hi
I have to develope a search page for invoice notifications. The trouble is that I can't find the connection between an invoice and the notifications sent on this invoice. Have no connection between the WF_NOTIFICATIONS table and the AP_INVOICES_ALL and AP_INVOICE_DISTRIBUTIONS_ALL tables. Is there anyone that can please help me ?

In the Report Builder, try
File --> Generate to File --> HTML
for an approximation of "what you see is what you get". There may be differences from what the end user sees based on different browsers (IE vs Netscape), different browser margin and font settings and different printers for printed reports. It is truly annoying. We have found that PDF is more predictable when it can be used instead of HTML.

Hetrogeneoues connection between Oracle and SQL server

Hi ,
I am having Issues in Making Heterogeneous DB link between Oracle Xe and sql server .
Here is the scenario-
My Oracle and ms SQL 2003 are running on same machine(windows 2003) ,
I have followed this link and reached till 5 but I am not able to tnsping the SQLSERVER DNS entry .
http://www.databasejournal.com/features/oracle/article.php/3442661/Making-a-Connection-from-Oracle-to-SQL-Server.htm
Below are my lintener and tnsfiles
LISTENER.ORA
===========================================================================================================================================================
SID_LIST_LISTENER =
(SID_LIST =
    (SID_DESC =
      (SID_NAME = PLSExtProc)
      (ORACLE_HOME = C:\oraclexe\app\oracle\product\11.2.0\server)
      (PROGRAM = extproc)
    (SID_DESC =
      (SID_NAME = CLRExtProc)
      (ORACLE_HOME = C:\oraclexe\app\oracle\product\11.2.0\server)
      (PROGRAM = extproc)
       (ENVS = "EXTPROC_DLLS=ONLY:C:\oraclexe\app\oracle\product\11.2.0\server\bin\OraClr11.dll")
LISTENER =
(DESCRIPTION_LIST =
    (DESCRIPTION =
      (ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC1))
      (ADDRESS = (PROTOCOL = TCP)(HOST = localhost)(PORT = 1521))
LISTENERSQL =
(ADDRESS_LIST=
      (ADDRESS=(PROTOCOL=ipc)(KEY=PNPKEY))
      (ADDRESS=(PROTOCOL=tcp)(HOST=localhost)(PORT=1522))
SID_LIST_LISTENERSQL=
(SID_LIST=
      (SID_DESC =
       (SID_NAME = SQLSRVRDBLNK)
       (ORACLE_HOME = C:\oraclexe\app\oracle\product\11.2.0\server)
       (PROGRAM = hsodbc)
===========================================================================================================================================================
TNSNAMES.ORA
XE =
(DESCRIPTION =
    (ADDRESS = (PROTOCOL = TCP)(HOST = testenviroment)(PORT = 1521))
    (CONNECT_DATA =
      (SERVER = DEDICATED)
      (SERVICE_NAME = XE)
EXTPROC_CONNECTION_DATA =
(DESCRIPTION =
    (ADDRESS_LIST =
      (ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC1))
    (CONNECT_DATA =
      (SID = PLSExtProc)
      (PRESENTATION = RO)
ORACLR_CONNECTION_DATA =
(DESCRIPTION =
    (ADDRESS_LIST =
      (ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC1))
    (CONNECT_DATA =
      (SID = CLRExtProc)
      (PRESENTATION = RO)
SQLSRVRDBLNK =
(DESCRIPTION=
(ADDRESS= (PROTOCOL=tcp)(HOST=localhost)(PORT=1522))
(CONNECT_DATA=(SID=SQLSRVRDBLNK)
(HS=OK)
========================================================================================================================================================
Listner Status
C:\oraclexe\app\oracle\product\11.2.0\server\network\ADMIN>lsnrctl status LISTENERSQL
LSNRCTL for 32-bit Windows: Version 11.2.0.2.0 - Production on 19-JUL-2013 13:15:59
Copyright (c) 1991, 2010, Oracle. All rights reserved.
Connecting to (ADDRESS=(PROTOCOL=ipc)(KEY=PNPKEY))
STATUS of the LISTENER
Alias                     LISTENERSQL
Version                   TNSLSNR for 32-bit Windows: Version 11.2.0.2.0 - Production
Start Date                19-JUL-2013 12:17:39
Uptime                    0 days 0 hr. 58 min. 24 sec
Trace Level               off
Security                  ON: Local OS Authentication
SNMP                      OFF
Listener Parameter File   C:\oraclexe\app\oracle\product\11.2.0\server\network\admin\listener.ora
Listener Log File         C:\oraclexe\app\oracle\diag\tnslsnr\testenviroment\listenersql\alert\log.xml
Listening Endpoints Summary...
(DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(PIPENAME=\\.\pipe\PNPKEYipc)))
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=127.0.0.1)(PORT=1522)))
Services Summary...
Service "SQLSRVRDBLNK" has 1 instance(s).
Instance "SQLSRVRDBLNK", status UNKNOWN, has 1 handler(s) for this service...
The command completed successfully
=========================================================================================================================================================
Now If I try to Tnsping SQL heterogeneous connection , i get
C:\oraclexe\app\oracle\product\11.2.0\server\network\ADMIN>tnsping SQLSRVRDBLNK
TNS Ping Utility for 32-bit Windows: Version 11.2.0.2.0 - Production on 19-JUL-2013 13:17:47
Copyright (c) 1997, 2010, Oracle. All rights reserved.
Used parameter files:
C:\oraclexe\app\oracle\product\11.2.0\server\network\admin\sqlnet.ora
Used TNSNAMES adapter to resolve the alias
Attempting to contact (DESCRIPTION=
TNS-12533: TNS:illegal ADDRESS parameters
Need Help , please suggest
Thanks,
Manish

Hi ,
Thanks for the update I have changed the Listener as suggested , now my Listener File is
SID_LIST_LISTENER =
(SID_LIST =
    (SID_DESC =
      (SID_NAME = PLSExtProc)
      (ORACLE_HOME = C:\oraclexe\app\oracle\product\11.2.0\server)
      (PROGRAM = extproc)
    (SID_DESC =
      (SID_NAME = CLRExtProc)
      (ORACLE_HOME = C:\oraclexe\app\oracle\product\11.2.0\server)
      (PROGRAM = extproc)
    (SID_DESC =
       (SID_NAME = SQLSRVRDBLNK)
       (ORACLE_HOME = C:\oraclexe\app\oracle\product\11.2.0\server)
       (PROGRAM = hsodbc)
       (ENVS = "EXTPROC_DLLS=ONLY:C:\oraclexe\app\oracle\product\11.2.0\server\bin\OraClr11.dll")
LISTENER =
(DESCRIPTION_LIST =
    (DESCRIPTION =
      (ADDRESS_LIST=
      (ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC1))
      (ADDRESS = (PROTOCOL = TCP)(HOST = 192.168.60.146)(PORT = 1521))
      (ADDRESS=(PROTOCOL=ipc)(KEY=PNPKEY))
      (ADDRESS=(PROTOCOL=tcp)(HOST=localhost)(PORT=1522)))
========================================================================================================================
and tns entry
SQLSRVRDBLNK =
(DESCRIPTION=
(ADDRESS= (PROTOCOL= TCP)(HOST=192.168.60.146)(PORT=1522))
(CONNECT_DATA=(SID=SQLSRVRDBLNK)
(HS=OK)
========================================================================================================================
Restarted the listener
C:\Documents and Settings\Administrator>lsnrctl start LISTENER
LSNRCTL for 32-bit Windows: Version 11.2.0.2.0 - Production on 20-JUL-2013 12:27:38
Copyright (c) 1991, 2010, Oracle. All rights reserved.
Starting tnslsnr: please wait...
TNSLSNR for 32-bit Windows: Version 11.2.0.2.0 - Production
System parameter file is C:\oraclexe\app\oracle\product\11.2.0\server\network\admin\listener.ora
Log messages written to C:\oraclexe\app\oracle\diag\tnslsnr\testenviroment\listener\alert\log.xml
Listening on: (DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(PIPENAME=\\.\pipe\EXTPROC1ipc)))
Listening on: (DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=192.168.60.146)(PORT=1521)))
Listening on: (DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(PIPENAME=\\.\pipe\PNPKEYipc)))
Listening on: (DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=127.0.0.1)(PORT=1522)))
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=IPC)(KEY=EXTPROC1)))
STATUS of the LISTENER
Alias                     LISTENER
Version                   TNSLSNR for 32-bit Windows: Version 11.2.0.2.0 - Production
Start Date                20-JUL-2013 12:27:44
Uptime                    0 days 0 hr. 0 min. 5 sec
Trace Level               off
Security                  ON: Local OS Authentication
SNMP                      OFF
Listener Parameter File   C:\oraclexe\app\oracle\product\11.2.0\server\network\admin\listener.ora
Listener Log File         C:\oraclexe\app\oracle\diag\tnslsnr\testenviroment\listener\alert\log.xml
Listening Endpoints Summary...
(DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(PIPENAME=\\.\pipe\EXTPROC1ipc)))
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=192.168.60.146)(PORT=1521)))
(DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(PIPENAME=\\.\pipe\PNPKEYipc)))
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=127.0.0.1)(PORT=1522)))
Services Summary...
Service "CLRExtProc" has 1 instance(s).
Instance "CLRExtProc", status UNKNOWN, has 1 handler(s) for this service...
Service "PLSExtProc" has 1 instance(s).
Instance "PLSExtProc", status UNKNOWN, has 1 handler(s) for this service...
Service "SQLSRVRDBLNK" has 1 instance(s).
Instance "SQLSRVRDBLNK", status UNKNOWN, has 1 handler(s) for this service...
The command completed successfully
========================================================================================================================
Still Getting the same Error
C:\Documents and Settings\Administrator>tnsping SQLSRVRDBLNK
TNS Ping Utility for 32-bit Windows: Version 11.2.0.2.0 - Production on 20-JUL-2013 12:27:52
Copyright (c) 1997, 2010, Oracle. All rights reserved.
Used parameter files:
C:\oraclexe\app\oracle\product\11.2.0\server\network\admin\sqlnet.ora
Used TNSNAMES adapter to resolve the alias
Attempting to contact (DESCRIPTION=
TNS-12533: TNS:illegal ADDRESS parameters
C:\Documents and Settings\Administrator>
========================================================================================================================
Do we need to change any thing in sqlnet.ora file for heterogeneous connection?
Thanks ,
Manish

JDBC Connection between Unix and SQL Server 2000

I have SQL Server 2000 installed in a pc as a data server and SQL Server 2000 JDBC Drive installed in a Unix machine. Both machines are connected and can ping each other. After setting up the environment data, I ran a test code to test the connection and got exceptions. ( I did the same process between a pc and the data server, it works well.)
Attached are the test code and error message. Hope someone can help me.
******* Test Code ********
import java.sql.*;
* Microsoft SQL Server JDBC test program
public class Test {
public Test() throws Exception {
// Get connection
DriverManager.registerDriver(new
com.microsoft.jdbc.sqlserver.SQLServerDriver());
Connection connection = DriverManager.getConnection(
"jdbc:microsoft:sqlserver://<hostname>","<username>","<password>");
if (connection != null) {
System.out.println();
System.out.println("Successfully connected");
System.out.println();
// Meta data
DatabaseMetaData meta = connection.getMetaData();
System.out.println("\nDriver Information");
System.out.println("Driver Name: "
+ meta.getDriverName());
System.out.println("Driver Version: "
+ meta.getDriverVersion());
System.out.println("\nDatabase Information ");
System.out.println("Database Name: "
+ meta.getDatabaseProductName());
System.out.println("Database Version: "+
meta.getDatabaseProductVersion());
} // Test
public static void main (String args[]) throws Exception {
Test test = new Test();
******* error message ********
Exception in thread "main" java.sql.SQLException: [Microsoft][SQLServer 2000 Driver for JDBC]Error establishing socket.
at java.lang.Throwable.fillInStackTrace(Native Method)
at java.lang.Throwable.fillInStackTrace(Compiled Code)
at java.lang.Throwable.<init>(Compiled Code)
at java.lang.Exception.<init>(Compiled Code)
at java.sql.SQLException.<init>(SQLException.java:64)
at com.microsoft.jdbc.base.BaseExceptions.createException(Unknown Source)
at com.microsoft.jdbc.base.BaseExceptions.getException(Unknown Source)
at com.microsoft.jdbc.base.BaseExceptions.getException(Unknown Source)
at com.microsoft.jdbc.sqlserver.tds.TDSConnection.<init>(Unknown Source)
at com.microsoft.jdbc.sqlserver.SQLServerImplConnection.open(Unknown Source)
at com.microsoft.jdbc.base.BaseConnection.getNewImplConnection(Unknown Source)
at com.microsoft.jdbc.base.BaseConnection.open(Unknown Source)
at com.microsoft.jdbc.base.BaseDriver.connect(Unknown Source)
at java.sql.DriverManager.getConnection(Compiled Code)
at java.sql.DriverManager.getConnection(DriverManager.java:137)
at Test.<init>(Test.java:10)
at Test.main(Test.java:32)
************ end of message ***********

If it works from a PC and not from the Unix box then you may have a network issue of some sort, I.E. firewall not letting it through etc.
Try using telnet on the Unix box to see if you can connect to the sql server on the port that the SQL server is listening.
E.G.
telnet server_name 1433
You may need to change the port number to the one that the SQL server is using.
Col

Connectivity between SAP and SQL Server

Hi all,
how to take the SAP data which is in Oracle database on AIX Operating system to SQL Server database which resides in Windows for a portal?
Can anyone help on this?
Regards,
Sathya

HEllo,
Hi
Please see the following:
1. Create an entry in Trxn DBCA for SQL Server in SAP, you are creating a database connection for the SQL server in SAP.
2. You use this connection, and write Native SQL stmnts...between EXECSQL...ENDEXEC to fetch the data..and then normal ABAP statements to put that data into your ztable.
TABLE DBCON Entry can be like this...depends on your External database..
CON_NAME Raj Logical name for connection
DBMS MSS Microsoft SQL Server
USER_NAME <User name> For SQL Server
PASSWORD <password> " "
CON_ENV MSSQL_SERVER=<server> MSSQL_DBNAME=<database name>
DB_RECO Availability type for an open database connect
FUNCTION z_houston_connect.
*"*"Local interface:
EXEC SQL.
CONNECT TO 'RAJ' AS 'V'
ENDEXEC.
EXEC SQL.
SET CONNECTION 'V'
ENDEXEC.
*- Get the data from MS-SQL Server
EXEC SQL.
open C1 for
select
l.loc_id,
l.loc_name,
a.acc_id,
a.acc_name,
d.person
from ho_loc_mast as l
inner join snd_acc_mast as a on l.loc_id = a.loc_id
inner join snd_acc_addr as d on a.loc_id = d.loc_id and
a.acc_id = d.acc_id
where l.loc_id = '001'
ENDEXEC.
DO.
EXEC SQL.
FETCH NEXT C1 into :wa-c_locid, :wa-c_locname, :wa-c_acc_id, :wa-c_acc_name, :wa-c_person
ENDEXEC.
IF sy-subrc = 0.
PERFORM loop_output.
ELSE.
EXIT.
ENDIF.
ENDDO.
EXEC SQL.
CLOSE C1
ENDEXEC.
ENDFUNCTION.
Regards,
Vasanth

Listen if the TCP connection between robot and LV GUI is lost

Hi
I'm doing a simple client/server TCP connection between a Labview GUI and a robot controller.
My robot controller acts as the TCP server that waits for a connection from the Labview GUI, it gets a string as a ready signal and then writes a string back to the LV GUI to tell that the controller is ready, then the LV GUI should be ready to send commands to the robot.
So now first of all there are two things I want to do;
1) I want the user to push a button to connect to the robot and then make a red/green light turn on if the connection is established, then the LV GUI also starts a small loop that waits fro whatever is coming from the robotcontroller, this is only for debugging right now
2) Secondly I want the LV GUI to listen if the connection somehow is lost, like if the robot goes out of range or some other programming error in the script for the robot controller that might make the TCP connection terminate. So if the connection is lost from the serverside, then I want the LV GUI to keep runing but just turn the light red.
I have tried some of the examples in Labview but I sure could need some help on this.
LV 8.5
LabVIEW 8.6 / 2009 / 2010
Vision Development Module 8.6 / 2009 / 2010
VBAI 3.6 / 2010
Attachments:
11.gif ‏10 KB
21.gif ‏12 KB

You really should change your architecture. I assume that your other controls also control the robot, so you will need more complex messaging.
I suggest you look at some of the examples and templates for queued message handler. Essentially, this will allow you to send message between two loops, which is probably what you want.
As for what your comm loop should actually look like, you should separate the opening part from the communicating and closing part. That way, you can send the Ready string immediately after connecting. The example code you used already handles the timeout error, which is the indication you want that the connection was lost.
Here's one (very bad) example of how this could be done:
You should note that this does not really do any error handling. If you use a queued message handler and actually turn the comm loop into a state machine (with states like Open,Comm and Close), it should be cleaner.
To learn more about LabVIEW, I suggest you try looking at some of these tutorials.
Message Edited by tst on 01-19-2008 07:53 PM
Try to take over the world!
Attachments:
Comm.png ‏7 KB

Share files over the internet between PC and MAC server

The set up:
A MAC OS X 10.3.9 server running on a local network in the office sharing files with 15 windows XP and MAC.
The problem:
Can't connect a windows XP away (from home over the internet) to see files being share by the MAC server. I can do this with an other MAC from my home when I go to "Connect to server" and then I type the IP adress of my MAC server at the office, login with the user ID and then can see files on the server. When I am at the office, there is no problem with the windows XP machine to connect to the MAC server. When I am at home, I can connect with my windows XP machine to the MAC server at the office for FileMaker server (reside on MAC server at office), but I can not see the files shared on the MAC server over the internet when I connect via windows explorer serveradress
(no firewall on the MAC server).
Thank you

I would like to know this, too. I'm trying to set up something with my bother on a PC. How does he make a connection on windows? I don't know what to tell him to do.
Gabriel, do you have Wndows Sharing activated under Services in your Sharing Prefs?
Tracy

What's the connection between iPhoto and Desktop Images?

I've had a problem for a couple weeks now, where I want to change my desktop wallpaper image and it won't stay set to the new image after I re-boot or re-start.
Yesterday, I stumbled upon a suggestion to re-load images into iPhoto so they show up under Events. I set the wallpaper image, rebooted and the old image came back.
This morning, I went back into iPhoto and selected each of the folders where I could see the new image. I selected the image, set it as desktop wallpaper and re-started. It worked. I changed the image to something else using the System Preferences --> Desktop & Screen Saver option, then re-booted and confirmed the new image I had selected was still set.
Voila! The problem was solved.
But what I don't know, is why iPhoto had anything to do with System Preferences --> Desktop & Screen Saver selections. I was trying to select the image in the main Pictures folder where I've always kept the images for my desktop but they wouldn't stay. The only way I was able to fix the problem is to use iPhoto and somehow, whatever it was that got corrupted was now fixed.
I've spent a good few hours over the course of the last couple weeks trying to fix the issue but I haven't yet found an actual fix until now as I stumbled upon it myself by chance. Any insights one may be able to share would be greatly appreciated.

Hi,
According to your post, my understanding is that you want to know the difference between User Profile Service and User Information List.
The user profile store in SharePoint contains information about users. User profiles can be created by importing users from a user account directory, or they can be created manually.
In most environments Active Directory will be used as the source for creating user profiles. The user profile imports can be scheduled to run on a regular basis and they can be either incremental or full.
However, the information in the user information list is stored in the UserInfo table in the content database of the site.
A user gets added to the user information list when he or she has accesses the site for the first time.
In the user information list a user's email address, login name and name are stored. SharePoint will make sure that user profile property information for those fields for users that are added to the user information list is sent to the user.
For more reference:
http://www.sharepointchick.com/archive/2009/06/17/user-profiles-and-the-user-information-list-or-userinfo-table.aspx
Thanks,
Jason
Forum Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected]
Jason Guo
TechNet Community Support

The connection between ADM and Essbase Server is lost?

Similar Messages

Maybe you are looking for