The content database on the server is temporarily unavailable while deploying a app
HI,
I got the following error while deploying a app. I have not added any logic in App.
What i have tried yet:
1. Configured Server for Using App
2. Added permission to user2 (app developer account by which i open VS 2012) as mentioned in following URL
http://community.zevenseas.com/Blogs/Akhilesh/Lists/Posts/Post.aspx?ID=10
Please let me know if anyone have faced and resolved it before....
Here we go .............................
Active Deployment Configuration: Deploy App for SharePoint
Skipping deployment step because a pre-deployment command is not specified.
Skipping the uninstall step because the app for SharePoint is not installed on the server.
Install app for SharePoint:
Uploading the app for SharePoint...
Installation is in progress (00:00:00)
Installation is in progress (00:00:01)
Installation is in progress (00:00:02)
Installation is in progress (00:00:03)
Installation is in progress (00:00:04)
Installation is in progress (00:00:05)
App failed to install, cleaning up...
App installation cleanup failed due to errors. Please see the app on the SharePoint site’s “Site Contents” page for details.
App installation encountered the following errors:
11/19/2013 2:42:13 PM
@"Error 1
CorrelationId: e6d878ab-ae8b-442c-90c1-ee989f5e719b
ErrorDetail: The content database on the server is temporarily unavailable.
ErrorType: Transient
ErrorTypeName: Intermittent
ExceptionMessage: System.IO.FileNotFoundException: <nativehr>0x80070002</nativehr><nativestack></nativestack>
at Microsoft.SharePoint.Library.SPRequestInternalClass.GetMetadataForUrl(String bstrUrl, Int32 METADATAFLAGS, Guid& pgListId, Int32& plItemId, Int32& plType, Object& pvarFileOrFolder)
at Microsoft.SharePoint.Library.SPRequest.GetMetadataForUrl(String bstrUrl, Int32 METADATAFLAGS, Guid& pgListId, Int32& plItemId, Int32& plType, Object& pvarFileOrFolder)
at Microsoft.SharePoint.SPWeb.GetList(String strUrl)
at Microsoft.SharePoint.Administration.SPDeveloperData.AddToDraftApps(Guid appInstanceId)
at Microsoft.SharePoint.Lifecycle.FinalFixupTask.Deploy()
at Microsoft.SharePoint.Administration.SPAppTask.DeployOperation()
at Microsoft.SharePoint.Lifecycle.MonitoredTaskExecution.DoTask()
Source: Finalization
SourceName: App Deployment Finalization
@"Error 2
CorrelationId: e6d878ab-ae8b-442c-90c1-ee989f5e719b
ErrorDetail: The content database on the server is temporarily unavailable.
ErrorType: Transient
ErrorTypeName: Intermittent
ExceptionMessage: System.IO.FileNotFoundException: <nativehr>0x80070002</nativehr><nativestack></nativestack>
at Microsoft.SharePoint.Library.SPRequestInternalClass.GetMetadataForUrl(String bstrUrl, Int32 METADATAFLAGS, Guid& pgListId, Int32& plItemId, Int32& plType, Object& pvarFileOrFolder)
at Microsoft.SharePoint.Library.SPRequest.GetMetadataForUrl(String bstrUrl, Int32 METADATAFLAGS, Guid& pgListId, Int32& plItemId, Int32& plType, Object& pvarFileOrFolder)
at Microsoft.SharePoint.SPWeb.GetList(String strUrl)
at Microsoft.SharePoint.Administration.SPDeveloperData.RemoveFromDraftApps(SPSite site, Guid appInstanceId)
at Microsoft.SharePoint.Lifecycle.FinalFixupTask.Rollback()
at Microsoft.SharePoint.Administration.SPAppTask.DeployOperation()
at Microsoft.SharePoint.Lifecycle.MonitoredTaskExecution.DoTask()
Source: Finalization
SourceName: App Deployment Finalization
Harsh
no ,it does has db permissions , this whole thing I think is related with weird and strange new condition of havinng sub-domains for apps ? by some changes I found it gos to my website and find outs that no resource available there , sometime 404 sometimes
502 error.
The whole idea of office team about app deployment is crazy , no proper documentation or knowledge base available for people using on-prem sharepoint, this may because of the idea using cloud more ,why should we use cloud for our enterprise data ?
btw links you gave not working either
Tech Learner
Similar Messages
-
I want to get all the documents based on content type using SQL Server Query. I know that, querying the content database without using API is not advisable, but still i want to perform this action through SQL Server Query. Can someone assist ?
You're right, it's not advisable, may result in corruption of your databases and might impact performance and stability. But assuming you're happy to do that then it is possible.
Before you go down that route, have you considered using something more safe like PowerShell? I've seen a script exactly like the one you describe and it would take far less time to do it through PS than it would through SQL. -
Hi,
I want to install SharePoint Foundation 2013 on a standalone server with SQL Express but I want to be able to name the content databases without their GUID references. Will I have to use an install script (AutoSPInstaller perhaps?) to achieve this?
Thanks.You can't do a standalone install if you want the alias (also if you plan to move the databases in the future)
You'll need to create the alias before you create the farm with the Configuration wizard or PowerShell so you can specify the alias. Whether you create the alias before or after installing SQL Express doesn't matter as long as it points to the instance.
Jason Warren
@jaspnwarren
jasonwarren.ca
habaneroconsulting.com/Insights -
IPhone 4S could not be activated because the activation server is temporarily unavailable
If you got the "scary" message that you could not activate iPhone 4S neither by Wi-Fi or iTunes, I want to share my experience:
I decided to reset my iPhone 4S, and used "Erase All Content and Settings" under the reset menu (Settings/General/Reset), I was hoping that the erasing just does that, but for me the nightmare started!
I was taken to the activation screens, and begun with the welcome one, choose language, choose location services (later on it also disappears) and selecting Wi-Fi and/or iTunes for activation.
I chose a Wi-Fi network the process started, and gave me a message that it will take about three minutes to activate iPhone, few minutes later a screen with this message appears: "Your iPhone could not be activated because the activation server is temporarily unavailable."
Then, I decided to try the activation using iTunes…
Using iTunes, after few minutes, it shows the following message: "We could not complete your iTunes Store request. The iTunes Store is temporarily unavailable. Please try again later."
I tried several times in both ways, trying 4 different Wi-Fi networks and 3 different computers in the whole process, and I was going desperate! I started to find out some info about this trouble over the Internet, and guess what? I was not alone! But I did not find any answer or solution either!
Finally, I joined Apple Support Communities, and started searching with no good luck at all, until I found (many hours later) this old (2009) solution:
+Do a DFU recovery:+
+1. Open iTunes.+
+2. Connect the iPhone+
+3 Press both the home and sleep/wake buttons until the Apple icon appears (ignore the red slider if it shows).+
+4. Continue pressing the home button alone until iTunes sees your phone in recovery mode.+
+5. Follow the prompts to restore the iPhone.+
(THANKS A LOT!!! modular747 and Easily Easy, you saved me!!!)
Then I suggest everyone to use this, of course it will erase everything, but you may be able to recover your data from your last backup, or you can also choose to configure iPhone as a new cell phone.
The process took me about 92 minutes, but it was worth it, now I own an unlocked iPhone 4S (it was an AT&T when I purchased from Apple Store in November) and is working perfectly!
Hope it is useful for all of you facing this trouble!
Good luck and enjoy your iPhone then!I tried the process and was happy to note that there was some process that I managed to start because the process did start ...
However to my disappointment, landed back at the same status which says
We're sorry, we are unable to continue with your activation at this time.
Please try again later, or contact customer care
I was using a GEVEY sim unlock with iOS 4.1 since (almost) last 2 yrs now in India on Vodafone. But as Apple designed it, there were several apps including Whatsapp, Facebook, Gmail and LinkedIn that stopped functioning due to the iOS updates and the subsequent (I guess 'mandatory' App updates). Finally yesterday I thought of updating to the iOS 6. As soon as I did that, I have been left with no choice but to see the above message.
The process by jhidrowoh starts corectly but iTunes doesnt give you the option of restore only ... it is forcefully clubbed with update and the button that is displayed in the dialog box that appears on pressing 'Restore' in teh recovery mode, shows 'Restore and Update' and as soon as the iPhone is restored, it automatically updates the iOS as well to iOS 6 and hence leaves you hanging in the stale situation.
Guys ... Need the data desperately ... Can anybody please help??? -
how to configure my 3gs iphone? it says your iphone could not be activated because the activation server is temporarily unavailable......
i live in iran. this 3gs was a gift from america .. it contains NOTHING. i can do nothing with it. it cannot be updated cuz the version is low. i dunno what t do please help.Possible causes:
1. Your antivirus is blocking access to gs.apple.com.
2. Your phone is jailbroken.
3. Your computer has been used at some time in the past to jaibreak some iOS device (not necessarily the phone with the problem), and its network database was corrupted by the hacking software that was used.
4. Apple's activation servers are down (very rare, and never for more than an hour or so).
5. The phone was reported stolen. If it was it can never be activated again.
For 1. try disabling your antivirus.
For 2. & 3. you need to go somewhere other than an apple forum for help. Although you can try deleting lines containing gs.apple.com from your "hosts" file on your computer. -
iphone could not be activated because the activation server is temporarily unavailable many time
Your antivirus or firewall may be blocking access to Apple's activation server at gs.apple.com.
If you have ever used your computer to hack or jailbreak any iOS device at any time in the past your network database on your computer is corrupted. Open the hosts file and delete any lines that contain gs.apple.com.
Mac: /etc/hosts
Windows: c:\windows\system32\drivers\etc\hosts
It is a hidden file, so you will have to set your file explorer to show hidden files. -
Remove-SPContentDatabase : The content database could not be found
I am using SharePoint 2010
============================================
PS C:\Windows\system32> get-spdatabase 8fdf806b-6dc8-49b2-8bfc-d574707ea58c
Name Id Type
Managed Metadata Serv... 8fdf806b-6dc8-49b2-8bfc-d574707ea58c Microsoft.SharePo...
=======================================================
The "Managed Metadata Service_e13d38135b8b4f268e0aa0d4c6d408b1" does not exist on the SQL Server.
When I remove the database, I am getting following error in powershell
==========================================================
PS C:\Windows\system32> remove-spcontentdatabase -id 8fdf806b-6dc8-49b2-8bfc-d574707ea58c
Remove-SPContentDatabase : The content database could not be found.
At line:1 char:26
+ remove-spcontentdatabase <<<< -id 8fdf806b-6dc8-49b2-8bfc-d574707ea58c
+ CategoryInfo : InvalidData: (Microsoft.Share...ContentDatabase:SPCmdletRemoveContentDatabase) [Remove-SPContentDatabase], SPException
+ FullyQualifiedErrorId : Microsoft.SharePoint.PowerShell.SPCmdletRemoveContentDatabase
============================================================
I dont want to use the DeleteConfigurationObject option as per below blog.
http://blogs.technet.com/b/nishants/archive/2010/04/14/how-to-delete-orphan-configuration-objects-from-sharepoint-farm.aspx
Are there any other options to fix this situation.
Thanks
NateMMS is not a Content Database, it is a Service Application Database. Run:
$db = Get-SPDatabase <GUID>$db.Delete()
That should do it.
Trevor Seward
Follow or contact me at...
  
This post is my own opinion and does not necessarily reflect the opinion or view of Microsoft, its employees, or other MVPs. -
my iphone coudnt be activated because it say's that the activation server is temporarily unavailable???how can i resolve this??
99.9% of the time, the cause of this issue is the fact the phone was jailbroken/hacked to unlock it for use on networks other than the network the phone was originally locked to. Apple maintains a database of officially unlocked iPhones, and when Apple's servers detect phones such as yours, activation stops & you get the message you got.
So, either get a sim card from the carrier your phone was originally locked to, or get it officially unlocked, because it appears that it was not officially unlocked. -
When I try to log on to my DC it says "The security database on the server does not have a computer account for this workstation trust relationship". It won't let me log on. I installed another server server 2012r2 (its virtual )
and I can get to ADSI edit.
I think what happened was I had a pc that could not connect without unplugging the network cable. So I found this fix
FIX: “The security database on the server does not have a computer account for this workstation trust relationship”2032011
I’ve seen a lot of solutions, or suggestions rather, with regard to the error in the title of this post. In my experience, the problem can almost always be resolved without extra domain add/removes and reboots, which is the most prevalent solution I have
seen around. Usually, this issue is due to a mismatch between attributes of the computer account in Active Directory and those values on the system itself. Here are the steps I take to fix this issue when it crops up:
Open up Active Directory Users & Computers pointed to the domain the computer account resides in
From the “View” pull-down menu, make sure that “Advanced Features” is checked
Navigate to the part of your organizational unit (OU) structure where the computer account for this server resides
Open the Properties for the computer object
Choose the “Attribute Editor” tab on the Properties dialog box
Check the Attributes dNSHostName & servicePrincipalName – anywhere that a fully qualified hostname is specified (e.g. myserver.mydomainname.com), make sure that the entry matches the hostname
you have configured when you go here on your server: Start -> Computer -> Right-Click, Properties -> Change Settings (under “Computer name, domain… settings”) -> Full Computer Name
As an example, for a fictitious W2K8 R2 server whose Full Computer Name is “srv1.mydomainname.com”, these attribute/value pairs should be in Active Directory:
dNSHostName:
srv1.mydomainname.com
servicePrincipalName:
HOST/SRV1
HOST/srv1.mydomainname.com
RestrictedKrbHost/SRV1
RestrictedKrbHost/srv1.mydomainname.com
TERMSRV/SRV1
TERMSRV/srv1.mydomainname.com"
Not reading it carefully I add a computer with the same name as the pc having the issue and followed the above. The problem is that I did not notice that the spn did not want the name of my server (serv1) but the name of the trouble
pc.
dcdiag output
PS C:\Users\administrator.TOM> dcdiag.exe
Directory Server Diagnosis
Performing initial setup:
Trying to find home server...
***Error: DC3 is not a Directory Server. Must specify /s:<Directory Server> or /n:<Naming Context> or nothing to
use the local machine.
ERROR: Could not find home server.
PS C:\Users\administrator.TOM> dcdiag.exe /s:DC2
Directory Server Diagnosis
Performing initial setup:
* Identified AD Forest.
Done gathering initial info.
Doing initial required tests
Testing server: Default-First-Site\DC2
Starting test: Connectivity
The host 9e0dca7a-d017-445a-b354-adee5ff53d48._msdcs.TOM could not be resolved to an IP address. Check the DN
server, DHCP, server name, etc.
Neither the the server name (DC2.TOM) nor the Guid DNS name (9e0dca7a-d017-445a-b354-adee5ff53d48._msdcs.TOM)
could be resolved by DNS. Check that the server is up and is registered correctly with the DNS server.
Got error while checking LDAP and RPC connectivity. Please check your firewall settings.
......................... DC2 failed test Connectivity
Doing primary tests
Testing server: Default-First-Site\DC2
Skipping all tests, because server DC2 is not responding to directory service requests.
Running partition tests on : ForestDnsZones
Starting test: CheckSDRefDom
......................... ForestDnsZones passed test CheckSDRefDom
Starting test: CrossRefValidation
......................... ForestDnsZones passed test CrossRefValidation
Running partition tests on : DomainDnsZones
Starting test: CheckSDRefDom
......................... DomainDnsZones passed test CheckSDRefDom
Starting test: CrossRefValidation
......................... DomainDnsZones passed test CrossRefValidation
Running partition tests on : Schema
Starting test: CheckSDRefDom
......................... Schema passed test CheckSDRefDom
Starting test: CrossRefValidation
......................... Schema passed test CrossRefValidation
Running partition tests on : Configuration
Starting test: CheckSDRefDom
......................... Configuration passed test CheckSDRefDom
Starting test: CrossRefValidation
......................... Configuration passed test CrossRefValidation
Running partition tests on : TOM
Starting test: CheckSDRefDom
......................... TOM passed test CheckSDRefDom
Starting test: CrossRefValidation
......................... TOM passed test CrossRefValidation
Running enterprise tests on : TOM
Starting test: LocatorCheck
......................... TOM passed test LocatorCheck
Starting test: Intersite
......................... TOM passed test Intersite
PS C:\Users\administrator.TOM> regsvr32 schmmgmt.dll
PS C:\Users\administrator.TOM> netdig /fix
netdig : The term 'netdig' is not recognized as the name of a cmdlet, function, script file, or operable program.
Check the spelling of the name, or if a path was included, verify that the path is correct and try again.
At line:1 char:1
+ netdig /fix
+ ~~~~~~
+ CategoryInfo : ObjectNotFound: (netdig:String) [], CommandNotFoundException
+ FullyQualifiedErrorId : CommandNotFoundException
PS C:\Users\administrator.TOM> Setup /PrepareSchema
Setup : The term 'Setup' is not recognized as the name of a cmdlet, function, script file, or operable program. Check
the spelling of the name, or if a path was included, verify that the path is correct and try again.
At line:1 char:1
+ Setup /PrepareSchema
+ ~~~~~
+ CategoryInfo : ObjectNotFound: (Setup:String) [], CommandNotFoundException
+ FullyQualifiedErrorId : CommandNotFoundException
PS C:\Users\administrator.TOM> netdiag /test
netdiag : The term 'netdiag' is not recognized as the name of a cmdlet, function, script file, or operable program.
Check the spelling of the name, or if a path was included, verify that the path is correct and try again.
At line:1 char:1
+ netdiag /test
+ ~~~~~~~
+ CategoryInfo : ObjectNotFound: (netdiag:String) [], CommandNotFoundException
+ FullyQualifiedErrorId : CommandNotFoundException
PS C:\Users\administrator.TOM> nslooup
nslooup : The term 'nslooup' is not recognized as the name of a cmdlet, function, script file, or operable program.
Check the spelling of the name, or if a path was included, verify that the path is correct and try again.
At line:1 char:1
+ nslooup
+ ~~~~~~~
+ CategoryInfo : ObjectNotFound: (nslooup:String) [], CommandNotFoundException
+ FullyQualifiedErrorId : CommandNotFoundException
PS C:\Users\administrator.TOM>Ok fixed.
At a elevated cmd prompt run ;
C:\Users\administrator.TOM>setspn -x
As you can see the DC serv1 had duplicate SPNs.
Checking domain DC=TOM
Processing entry 1
HOST/serv1.TOM is registered on these accounts:
CN=SERV1,OU=Domain Controllers,DC=TOM
CN=C00049,CN=Computers,DC=TOM
{14E52635-0A95-4a5c-BDB1-E0D0C703B6C8}/TOWN-HBWJ29ZOQC is registered on these ac
counts:
CN=Administrator,CN=Users,DC=TOM
CN=TOWN-HBWJ29ZOQC,CN=Computers,DC=TOM
{14E52635-0A95-4a5c-BDB1-E0D0C703B6C8}/town-hbwj29zoqc.TOM is registered on thes
e accounts:
CN=Administrator,CN=Users,DC=TOM
CN=TOWN-HBWJ29ZOQC,CN=Computers,DC=TOM
RestrictedKrbHost/serv1 is registered on these accounts:
CN=C00049,CN=Computers,DC=TOM
CN=SERV1,OU=Domain Controllers,DC=TOM
RestrictedKrbHost/serv1.TOM is registered on these accounts:
CN=C00049,CN=Computers,DC=TOM
CN=SERV1,OU=Domain Controllers,DC=TOM
found 5 groups of duplicate SPNs.
Went to the computers OU and changed computer c00049 to the correct SPN. Now I have a new issues, I'll start a new thread. -
I am trying to update my Iphone 3 and when i get to the activation step after a few minutes it shows a message that says " Your iPhone could not be activated because the activation server is temporarily unavailable. Try conenecting your iPhone to iTunes to activate it, or try again in a couple of minutes.
If the problem persist, contact apple support at apple.com/support
I been trying for a few times now and I keep getting the same message. How can i fix it? now my phone doesnt work.These are the steps mentioned in the article iPhone: Troubleshooting activation issues
Perform the following steps if you receive one of the messages above:
Restart the iPhone.
Try another means of reaching the activation server and attempt to activate.
Try connecting to a known-good Wi-Fi network if you're unable to activate using a cellular data connection.
Try connecting to iTunes if you're unable to activate using Wi-Fi.
Restore the iPhone.
If you receive an alert message when you attempt to activate your iPhone, try to place the iPhone in recovery mode and perform a restore. If you're still unable to complete the setup assistant due to an activation error, contact Apple for assistance. -
I updated my Iphone 3gs to 6.1.3, after that m having this message:
"Your iPhone could not be activated because the activation server is temporarily unavailable."
"The SIM card inserted in this iPhone does not appear to be supported"
plz help me! what should i do now?You had a jailbreak and unlock.
When you updated you cooked it.
Your phone is done.
Time for a new one. -
this is the message i am getting:
Your iPhone could not be activated because the Activation Server is temporarily unavailable. Try connecting your iPhone to iTunes to activate it, or try again in a few minutes. If this problem persists, contact Apple Support at apple.com/support
nothing i can do to it
looked on forums, can't get to anything (flight mode, etc, etc)This usually happens if the phone has been Hacked / Jailbroken / Modified...
If this is the case... Then...
Sorry... But...
The discussion of Jailbroken Devices is against the Terms of Use of this Forum.
You will need to look elsewhere.
Why Jailbreak is Not Supported
http://support.apple.com/kb/HT3743 -
My iphone could not be activated because the activation server is temporarily unavailable
my iphone could not be activated because the activation server is temporarily unavailable.
I did NOT jailbreak MY phone and have the same issue! so what now???
-
HT201407 iPhone could not be activated because the activation server is temporarily unavailable.
iPhone could not be activated because the activation server is temporarily unavailable.
Google may provide some direction. Terms of Service prohibit
discussion of jailbroken iPhones in the forum.
Contact the developers of the jailbreak - they support their software,
don't they? -
now my iphone is 3GS 32GB and now it is version 4.1 and i make an update to 6.01 and the update is installed but there is an error saying that the activation server is temporarily unavailable and saying try connecting to itunes and to activate and i do but nothing new i need a solve for my proplem now !!
That message usually indicates that the phone was either hacked/modified or jailbroken?
Was this phone ever locked to a different phone carrier?
Maybe you are looking for
-
FTP Adapter batching multiple files in one send
Hello, I'd like to set up a process in XI to allow me to group all files into one batch message and send the group all in one send every thirty minutes. This is an FTP adapter. Do I need to work through a BPM to do this? Is there a good blog or for
-
In Safari with the above website, I cannot "View Source". Also, I have the same problem viewing images of patents at the USPTO, again probably a similar problem. Perhaps the web address isn't HTML but is an image format not supported by Firefox. Perh
-
Hi All In a MTO process, all items got confirmation in PO but no Order Confirmation to customer was triggered. Reason might be Confirmation status "partially confirmed" in the status tab of the header of the sales order. But I also checked that all i
-
JNI to access functions of a dll to deal with a data aquision pci card
i am trying to do an applicattion to access the functions of a dll to deal with a data aquision pci card (Analogig/Digital pci card). i�m using jni of course, but i have some problems. first i did a class called "TesteDll" witch contains all the nati
-
Aperture vs photo shop vs paint shop pro(
I'm a new Mac user..... on my PC I've used both Photoshop (harder to use) and Paint Shop Pro easier but still a lot of options). I'm not a professional photographer but I take a lot of pictures and enjoy enhancing them.... more then just taking the r