The data aquisition sub.vis are not available on my toolbar.

I found a document that said that some options may not be loaded because of the DAQ board or other hardware that is installed. I was trying read the signal on my
board using AI Sample Channel.vi but it is not available in the toolbar. Is this not the way you would do it with this board? This is the way the manual states to do it. I'm simply trying to
connect my VI to my DAQ board. I've used the channel naming conventions.
How do I get the data into my VI?
I've tried to reinstall the software, and install the missing parts but I get 'error 1605' while reloading the software.

Hi Scubadude,
I was wondering if you are able to see the Data Acquisition subpalette in your functions palette. The AI Sample Channel.vi should be in this palette if it shows, if it doesn't you may have to reinstall NIDAQ. Make sure that you unistall all previous versions of NIDAQ on your machine from Control Panel-Add/Remove programs before you try to reinstall it.
The error your are getting 'error 1605' is an out-of-space error. Check to see you have enough space on the machine and make sure you do not have multiple copies of the software on your machine.
Hope this helps.
Regards,
Pravin Borade
Applications Engineer, National Instruments

Similar Messages

  • I have created a PDF and password protected it for view. However, when reading the PDF in Adobe Reader app on the iPad the commenting and annotation options are not available. Is there a way to allow commenting and annotation in the app while password pro

    I have created a PDF and password protected it for view. However, when reading the PDF in Adobe Reader app on the iPad the commenting and annotation options are not available. Is there a way to allow commenting and annotation in the app while password protecting the document?

    Is there a setting that needs to be set to allow the annotation features?  I set password protection to open and then password for editing and set it to Any except page extraction, but it still did not give the annotation option

  • When I try to use the editor in Joomla, I get the message that cut & paste are not available.

    Hi -- I'm using Joomla to develop a website. When I try to use the editor, I get the message that cut & paste are not available. I am directed to instructions to edit the user.js file. I found the file in xhpnmg5i.default and then inserted the various 'user_pref' lines as instructed changing the site name to "http://localhost". This made no difference whatsoever so I downloaded an add on called allow clipboard helper. Looks great but how do you use it? There's nowhere on the screen that allows you to start the program. I've spend most of the day trying to do something that I'm surprised an open source program doesn't just let me do. HELP

    Uninstall the program then download and reinstall - activate with the serial number from your Amazon purchase.
    PSE 10, 11 - http://helpx.adobe.com/photoshop-elements/kb/photoshop-elements-10-11-downloads.html 
    PE 10, 11 - http://helpx.adobe.com/premiere-elements/kb/premiere-elements-10-11-downloads.html

  • Many of the fonts on my PC are not available in InDesign CS5.5?

    Hi
    I am using a font called Narkisim in FW but it is not available in my InDesign CS5.5. I have checked the 'font' folder for InDesign and actually its empty, though the preset standard fonts are all there.
    Really not sure whats going on here, please help? I really need to use Narkisim for this print job that I'm doing.
    I appreciate the help.
    Ash

    FW = FireWorks, I imagine.....
    Is the font installed in one of the system font locations on a Mac or the System fonts folder on PC? If not it must be installed there, or in the Adobe common fonts folder, or ID's own private fonts folder to be seen by ID. If it is installed in a palce ID can see it, make sure you scroll through the whole font list. Some fonts are classified in odd ways and may be out of order alphabetically or included in one of the non-roman groups near the bottom of the list (In fact, Narkism seems to be a Hebrew font, so it should be listed near the bottom with other Hebrew fonts).
    If you still can't find it, that may indicate that the font doesn't come up to the standards ID needs (it seems to be about 20 years old). ID is far more sensitive to imporper or bad font formatting than other applications.

  • I have two podcast folders. I can't delete and redownload the old ones because they are not available any more. How can I get them into the new folder?

    The problem of having 2 'Podcast' folders / menu items after adding a new podcast through clicking on a link in the browser has been addressed on the forums by instructing users to resubscribe to existing podcasts, which then appear in the new folder, and delete the old folder.  This will not work for me as most of the podcasts I listen to are BBC, which vanish from the web 7 days after they were first broadcast (about which much swearing, but that's unalterable).  Consequently I can't adopt this solution.
    I have resubscribed to the podcasts using the link in a browser method, so that they all appear and (in theory) will download new episodes again. However, this leaves the old episodes missing. What must I do to get the episodes downloaded from the old podcasts recognised as belonging to the new subscriptions?

    I found a very fast and easy solution: I selected all the podcasts in the first window, copied them using the command in the Menu>Edit (Command+C did not seem to work). I then pasted them into the new empty folder. All the podcasts already downloaded appeared. The only problem is that some podcasts did not remember which had been viewed or not, while did keep the information. I just had to re-subscribe to the ones I still wanted by clicking on button.
    For some reason, the previous Podcasts folder was only recogized as a list by iTunes, this showed up when I deleted the previous folder (contextual menu). I also had to re-select which ones I wanted synced with my iPad and iPhone.
    (I did make a backup of the Podcasts folder in the Finder, just in case, a bit like voodoo computing)

  • TS3276 the date in my emails are not correct

    How do I change the date at the top of my incoming emails can any one help???

    Incorrect date or time displayed in various applications

  • I've tried to conduct a secure erase with disk utility. I highlight the drive but erase options are not available.

    I tried to conduct a secure erase with disk utility. I highlight the drive but there's no place to click "erase."

    If you have an SSD, then the best thing you can do it enable System Preferences -> Security -> FileVault, so that any deleted files are just an encrypted jumble of bits to anyone that does not have the encryption key.
    And even if you do erase the SSD, it does not work the way you think, and retired SSD zones may have your data, and never see an erase.
    This is way keeping the SSD encrypted means retired zones are just encrypted jumble of bits.
    If you do NOT have an SSD, is it possible you are trying to erase your boot disk while you are actually using your boot disk?  Disk Utility will not allow you to do that either.

  • Data with XMLTYPE column are not being shown after importing.

    I have installed Oracle 10.2 release on Win2000 machine. I have imported oracle 9.2.0.4.0 dump on this oracle 10.2 release. This was done fine. but the tables which have XMLTYPE as any columns,the data of those tables are not shown in the corrosponding user.
    Can anyone guide me what should i do?
    Thanks
    Mitesh

    Hi CAMILO URIBE,
    As far as I understood, the import does not take the calendar from MSproject, rather take a fixed one. The background is that, the MSproject using numric for calendar and the cProject uses characters. During the export, an automatic numric calendar ID is created for MsProject, but the mapping between Msproject and cProject calendar does not exit, so that the later importing action will ignore the Msproject calendar ID.
    Search SAP notes in this topic should give more details.
    Kind regards,
    Zhenbo

  • New DSO data fields are not available for transformations in the upwardflow

    Hello,
    There are data flow from
        many source DSOs -> Target DSO -> Final DSO.
    Different transformations are defined and activated with DTPs. This works fine and provides the desired results.
    now new fields are added to the target DSO, final DSO and one of the source DSO.
    When I now try to edit the transformations, the new fields are not part of the sources at the different stage.
    The fields are available in the Data Source created out of a DSO but not directly when using a DSO as a data source.
    Have anyone faced such a problem?
    any solutions to this?
       - I cannot delete all the other transformations as this is too much work to do and there is no time for it.
    Regards
    Kannan

    We created ZMD_BS_MAT_OVP_LAYOUT. But the situation has not changed - the fields are not available for edit.

  • I have apps loaded on my iPad. they show in the main screen are not available to load documents to in the window list which should appear below the main window. the same apps do appear in the sub window on my other iPad. any ideas?

    i have apps loaded on my iPad. they show in the main screen are not available to load documents to in the window list which should appear below the main window. the same apps do appear in the sub window on my other iPad. any ideas?

    From what I can see, unless you're doing things with old versions of Xcode on a Mac (in which case, the solution seems to be to upgrade to the latest version), this seems to e an iTunes issue.
    Accepting that it works fine with another iPad, I suggest trying the following:
    1. Restart the non-working iPad
    2. If that doesn't work, reinstall iTunes. If you're on a Windows PC, I suggest using Control Panel to uninstall all the Apple apps, restarting the PC, and doing a fresh install. If you're using a Mac, a repair permissions might help too.
    iTunes 10.3 is now available, and that may make a difference.

  • Datas are not available to the query when upload a Infopackage

    Hello People,
    I Would like to know what can be the reason ..why the datas are not available when we execute an upload from FlatFile to the Cube (this one is the last target one).
    Considering tere aren´t any poroblem in may target (Cube)
    The system shows us the upload was ok, but the status about the "available datas to the query" was not activated.
    Thanks,
    Rosana.

    Hi ,
    Please go to T code SE16--> Table RSDDAGGR
    Here AggrUID(STARTUID)  give not equal to blank, you will get list of all the cubes which has aggregates.
    If your cybe is in this list , you need to rollup the data to mae this available in reporting.You can rollupp the data by going into Manage of the cube.
    -Vikram

  • Problem updating to iphoto 9.6 after upgrading to Yoesmite  I am getting the following message when I try top date iPhoto This update is not available for this Apple ID either because it was bought by a different user or the item was refunded or canc

    problem updating to iphoto 9.6 after upgrading to Yoesmite  I am getting the following message when I try top date iPhoto This update is not available for this Apple ID either because it was bought by a different user or the item was refunded or canc

    "This update is not available for this Apple ID either because it was bought by a different user or the item was refunded or cancelled." ?
    This error message will appear erraneously, if you skipped the update to Mavericks and iPhoto 9.5.1 and went straight from an earlier MacOS X version to Yosemite, without first updating to iPhoto 9.5.1 and associating iPhoto to your AppleID.
    Try first to buy iPhoto with your AppleID instead of updating. Delete iPhoto from Applications, but don't empty the Trash, then go to the main page of the App Store and search for iPhoto. If you are lucky, it will show as free and you can buy it directly.
    If iPhoto  is not showing as free, there is no help but contacting the App Store Support: Ask for a redemption code. You will need to provide a prove of purchase for your mac with iPhoto preinstalled.
    http://www.apple.com/support/mac/app-store/contact/

  • My pc crashed and I lost all my pictures and music that was stored on the pc.  Now i have a new pc and when i connect to itunes using my password all my music and photos are not available.  they appear to be lost.

    my pc crashed and i lost all my pictures and music that was stored on the pc. now i have a new pc and when i log into itunes all my music and photos are not available.  I guess i dont understand the pupose of itunes and its worth.  I thought it backed up all my photos and music, but apparently not.  So what do I use so that when i lose data on  my pc i can retrieve it again at a later date or after a crash?/

    Your content will only be where you put it.  It has always been very basic to always maintain a backup copy of your computer.
    You can transfer itunes purchases from your iphone: File>Device>Transfer purchases.
    You can import your pics taken with the iphone as you would with any digital camera.
    You can e-mail the other pics to yourself, they will never be of the original quality.
    You can out a unique contact and calendar entry on the computer.  You should get the option to merge the data when you sync.

  • I get nothing but error messages, -"Your IMAP server wants to alert you to the following: 113 that mail is not available" or 364? there are hundreds stacked up.You must give answers to how to fix these when we do "search" add the error code number

    I get nothing but error messages, -
    "Your IMAP server wants to alert you to the following: 113 that mail is not available"  or  the same with:  364? 
    Now there are hundreds stacked up on my desktop.
    I cannot find the answer anywhere. You need to  give answers to how to fix these errors because when I  "search" "error code" or the number there is NOTHING. NOTHING!  Yet you give us these stupid error codes
    then you do not give us ANYTHING on how to fix these. These error codes make me so mad it makes me hate outlook, and hate the developers and hate microsoft.  How in the world can you give us ERROR codes without the explanation of what
    to do or how to fix it. You need to  add each  error code number in your "search" then explain what it is and how to fix it.  I am not a tech. I am a lawyer. I have googled the entire string of error code and nothing is clear.
    So, for the last several years, I get these error codes. Also, there is another error code that won't go away--it is the password error code that asks if I want to store the password. Yes, so I say YES. but it pops back. I am sick of this. This is the reason
    I hate Microsoft and I love google. #1 they respond to error, #2 them try to fix them you do not. I paid the full price to buy the OUtlook 2010, almost $500 just to get outlook, and all I got was error codes. I could not even open it because all I would get
    was that error codes and NO ONE knew how to fix them. WHAT IS YOUR PROBLEM that you cannot fix the stupid error codes that you imbed? PLEASE HELP

    Hi,
    I understand how frustrated you are when facing such an issue, maybe I can provide some suggestions on the problem.
    Based on the description, you should be using an IMAP account setup in Outlook. As for the error message, usually it's caused by a corrupted message on the Server. I suggest you logon the Webmail site, check if sending/receiving emails works well.
    If you find any unusual emails that cannot be read or sent, try deleting them to try again.
    I also suggest you create a new profile to setup the IMAP account:
    http://support.microsoft.com/kb/829918/en-us
    Contact your Email Service Provider to get the correct and latest account settings, since you have been using Outlook for years, some settings may have been changed while you haven't been informed.
    For the steps to setup an account in Outlook 2010, please refer to:
    http://office.microsoft.com/en-001/outlook-help/add-or-remove-an-email-account-HA010354414.aspx
    I hope this helps.
    Regards,
    Melon Chen
    TechNet Community Support

  • How do I revert to abackup from time machine? The backups prior to Lyon install are not available  - restore button is not active. I wish to return to Snow Leopard.

    How Do I revert to Snow Leopard from Lyon?
    The backups prior to Lyon install are not available... the restore button is not active.
    thanks!

    You need to do a full system restore from your last Snow Leopard backup.
    See #14 in  Time Machine - Frequently Asked Questions.

Maybe you are looking for