The data does not encrypt using Wallet!

Hi All,
I've created a wallet to encrypt/decrypt the data, but when I change any column to be ecrypted by this command:
alter table accounts modify (ssn encrypt); --accounts is the table containing ssn column to be ecrypted.
and then inserting data on it, the data does not appear in encrypted format it appears in it's truth format!
how to make the data ecrypted?

Dev. Musbah wrote:
Hi All,
I've created a wallet to encrypt/decrypt the data, but when I change any column to be ecrypted by this command:
alter table accounts modify (ssn encrypt); --accounts is the table containing ssn column to be ecrypted.
and then inserting data on it, the data does not appear in encrypted format it appears in it's truth format!
how to make the data ecrypted?Did you go back and read that what does TDE(transparent data encryption) actually does? It does NOT make your column look encrypted but makes the physically stored data in teh datafile as encrypted which otherwise can be reverse engineered by someone and can be read. In your case, whatever is happening is the right thing.
For your unmentioned version, here is the link for the same,
http://download.oracle.com/docs/cd/E11882_01/network.112/e10746/asotrans.htm#ASOAG10137
HTH
Aman....

Similar Messages

When I take a picture with my iphone, the date does not show when I down load the picture. Is there a way to program this?

when I take a picture with my iphone, the date is not downloaded to my picute. Is there a way to get the date put on my pictures.

Dropbox "Camera upload" option just rename the files and looks like this.

I can fax but the date does not show up on the fax, display nor confirmation. need info to fix

HP7500A printer, just purchased. Works fine except for date. Since I must have evidence of time sent on fax, this does not do the job.
This question was solved.
View Solution.

Hi Mbailey212,
Do you have the date/time set on the machine itself? to do so:
Go to the front display of the printer, and ensure the printer's display is on the home screen, if its not, the home light on the upper left will be lit. If so, touch it and it will take you to home, then arrow right once and select settings, scroll down to preferences and select it. At the top you should see date and time, select this and enter in the correct date and time.
Let me know if this helps or not.
If I have helped in any way, just click the Kudos star on the left. Also, if your issue has been resolved, don't forget to select Accept as Solution

Embedded Database - data does not load

Hello.
I am currently using NetBeans 6.5 and am experimenting with the CarsApp tutorial.
Whenever I create an application using the server database, the data loads automatically when the application starts.
However, when I create the application using an embedded database, the data does not load and I just get a blank table.
For more information, go to: http://forums.sun.com/thread.jspa?threadID=5366394&tstart=0
Thank you in advance!

I'm sorry, I didn't know it was so looked down upon.
I thought that since this topic pertained to both Destop Applications and JDBC, I could get the best and quickest answer if I posted in both.
Apparently, that was a mistake.
Thanks, anyways!

How do I monitor a TCP/IP connection if my data does not come perdiodically?

I have an application that connects to several acquisition devices where I get TCP packet data only when something changes. If the line gets cut, how can I monitor this so that the user of the application will know that no data will come from that certain acquisition device? Since the data does not come periodically, I cannot monitor the error from the TCP read function, i.e. Error 56 - Timeout.
Is there a way to find out if an IP exists for example? (Such as a ping but it shoudl be fast)
Thanks

arikb-
You can use the System Exec.vi to run a ping command through the command line and see if it is responding. You could also program the client such that it responds to a simple command with a verification message at any time. This would be similar to sending a ping, but it will also let you know if your LabVIEW program is on the other listening on the correct port.
Xaq

My ICal data does not show up on Subscribers Calendar

Following all of the instructions how to get my ICal information to another Apple Computer (Macbook Pro) however when we access the Macbook Pro the data from my Calendar does not show up. Calendar is there, just the data does not make it across.
Any thoughts.
Thanks Mark

Thanks for the information.
If you view the same calendar on the MobileMe website, do you see the events?
http://ical.me.com/yourmembernamehere/calendarname
If you don't see the events on the calendar web page then the publish did not go through succesffully. Un-publish the calendar, make a slight change to its title, and then re-publish and test.
If you do see the events on the website but still not in iCal on the 10.6.8 system:
1. First make an iCal backup: Click on each calendar on the left hand side of iCal 1 at a time highlighting it's name and then going to File Export > Export and saving the resulting calendar file to a logical location for safekeeping.
2. Remove the subscription for iCal to that specific calendar.
3. Remove the following to the trash and restart your computer:
Home > Library > Caches > com.apple.ical
Home > Library > Calendars > Calendar Cache, Cache, Cache 1, 2, 3, etc. (Do not remove Sync Cache or Theme Cache if present)
Home > Library > Preferences > com.apple.ical (There may be more than one of these. Remove them all.)
---NOTE: Removing these files may remove any shared (CalDAV) calendars you may have access to. You will have to re-add those calendars to iCal > Preferences > Accounts.
4. Launch iCal and re-add the subscription.
Hope that helps!

AWM - After successull cube maintainance data does not load

Hi All,
After creating the cube when i maintain the cube the data does not load. I went back and looked at the mapping at the cube level and the dimension level and everything looks fine. Any clues why the data does not get loaded. Also, i did not recieve any error while maintaing the cube.
thanks

Hi,
I was able to resolve this issue. I did not map the cube properly especially the time dimension. Due to this the data did not get loaded in the cube. ReMapping fixed the problem.
Hope this helps other newbies..

After importing images from my card using LR 5.4, the GPS data does not show in the metadata panel. However, when I look at the imported images using Bridge, the GPS data is visible. Anybody know why LR is not seeing the GPS data? Camera is Canon 6D.

After importing images from my card using LR 5.4, the GPS data does not show in the metadata panel. However, when I look at the imported images using Bridge, the GPS data is visible. Anybody know why LR is not seeing the GPS data? Camera is Canon 6D.

Ok, the issue seem to be solved. The problem was this:
The many hundred files (raw and xmp per image) have been downloaded by ftp in no specific order. Means - a couple of files in the download queue - both raw and xmps. Most of the time, the small xmp files have been finished loading first and hence the "last change date" of these xmp files was OLDER than the "last change date" of the raw file - Lightroom then seem to ignore the existence of the xmp file and does not read it during import.(a minute is enough to run into the problem)
By simply using the ftp client in a way that all large raw files get downloaded first followed by the xmp files, we achieved that all "last changed dates" of the xmp files are NEWER than the related raw files. (at least not older)
And then LR is reading them and all metadata information has been set / read correctly.
So this is solved.

After the upgrade to Mozilla 32 using csv files to import data does not work anymore. What should I do?

Hello,
After the latest upgrade to Mozilla 32 a previously recorded imacros scirpt in which the data was being imported into mozilla from a csv file keeps erroring out. This same problem occurred with the with the upgrade to Mozilla 30 and was fixed when Mozilla was upgraded to 31. Can you please advise on how to correct the problem so that csv files can be used in conjunction with imacros scripts. I would like to point out that imacros still works without the use of csv files, but when you introduce a csv to the script the imacros does not work.
Thank you,
Eugene

hello eugene, please directly contact the imacros extension developers through the means provided at their [http://forum.iopus.com/viewforum.php?f=11 forum] - they can likely give you more detailed guidance and are the only ones who can fix bugs or make necessary adjustments in the addon for new firefox versions. thank you...

I am concerned about personal data being not encryption in transit over the Internet and therefore can be seen by other people.

I am a new Firefox user. I have just installed Firefox 4 on my windows PC today, 5/27/11. I have two major questions:
1. Accidentally, I clicked some thing at random on the screen (I can't remember what it was) and this page, http://us.config.toolbar.yahoo.com/bh/v2/wp/?view=wc&intl=us&pc=yma3&dc=v2_upgd&cv=2.3., showed up under Yahoo! Toolbar. It informed me that the connection was not encrypted and that information sent over the Internet could be seen by other people. I am not sure what the warning is all about. Does it mean when I use Firefox as a browser to access the Yahoo! and other Internet sites, e.g., my bank, all my personal (username, password, etc.) and bank data will be seen by other unauthorized people? I have never seen a similar warning from other browsers, such as Internet Explorer and Safari? So, if Firefox does not offer protection of personal data, I wonder what's the point of using it. I could have misinterpreted the Firefox warning and would highly appreciated it if you can clarify.
2. During the installation process, a message showed that Firefox 4 was not compatible with certain features of some of the software already on my PC. I did not copy those features and do not remember what they were except one that was associated with my firewall ZoneAlarm. I could be wrong but I think the message also said Firefox had removed the incompatible features. Please tell me if I should be concerned about it, especially the one that was removed from ZoneAlarm. Will my PC become susceptible to hacker invasions when I use Firefox as the browser? I wish Firefox had given some written explanations along with the incompatibility and removal message so that a user can understand exactly what it is about.
I would appreciate to hearing from you at your earliest convenience. I have tentatively suspended using Firefox until I can be assured that it is safe to do so without potentially compromising my personal data.
Thank you.

That is a generic warning message that you get if you submit a form via a normal HTTP connection (i.e not in via a secure HTTPS connection). That warning pop-up probably has a box to suppress this message in the future.
If you exchange data with your bank site then there should be a secure connection.
You can verify that by clicking the Site Identity Button (website's favicon) on the left end of the location bar.
* https://support.mozilla.com/kb/Site+Identity+Button
You need to check the ZoneAlarm website to see if they have an update of their software that is compatible with Firefox 4.0.1

Any idea what this errorr means? the data type of the reference does not match the data type of the variable

I am using Veristand 2014, Scan Engine and EtherCat Custom Device. I have not had this error before, but I was trying to deploy my System Definition File (run) to the Target (cRio 9024 with 6 modules) and it failed. It wouldn't even try to communicate with the target. I get the 'connection refused' error.
I created a new Veristand project
I added the Scan Engine and EtherCat custom device.
I changed the IP address and auto-detected my modules
i noticed tat Veristand didn't find one of my modules that was there earlier. (this week)
So, i went to NiMax to make sure software was installed and even reinstalled Scan Engine and Veristand just to make sure.
Now, it finds the module, but when i go to deploy it getsto the last step of deploying the code to the target, and then it fails.
Any thoughts?
Start Date: 4/10/2015 11:48 AM
• Loading System Definition file: C:\Users\Public\Documents\National Instruments\NI VeriStand 2014\Projects\testChassis\testChassis.nivssdf
• Initializing TCP subsystem...
• Starting TCP Loops...
• Connection established with target Controller.
• Preparing to synchronize with targets...
• Querying the active System Definition file from the targets...
• Stopping TCP loops.
Waiting for TCP loops to shut down...
• TCP loops shut down successfully.
• Unloading System Definition file...
• Connection with target Controller has been lost.
• Start Date: 4/10/2015 11:48 AM
• Loading System Definition file: C:\Users\Public\Documents\National Instruments\NI VeriStand 2014\Projects\testChassis\testChassis.nivssdf
• Preparing to deploy the System Definition to the targets...
• Compiling the System Definition file...
• Initializing TCP subsystem...
• Starting TCP Loops...
• Connection established with target Controller.
• Sending reset command to all targets...
• Preparing to deploy files to the targets...
• Starting download for target Controller...
• Opening FTP session to IP 10.12.0.48...
• Processing Action on Deploy VIs...
• Setting target scan rate to 10000 (uSec)... Done.
• Gathering target dependency files...
• Downloading testChassis.nivssdf [92 kB] (file 1 of 4)
• Downloading testChassis_Controller.nivsdat [204 kB] (file 2 of 4)
• Downloading CalibrationData.nivscal [0 kB] (file 3 of 4)
• Downloading testChassis_Controller.nivsparam [0 kB] (file 4 of 4)
• Closing FTP session...
• Files successfully deployed to the targets.
• Starting deployment group 1...
The VeriStand Gateway encountered an error while deploying the System Definition file.
Details:
Error -66212 occurred at Project Window.lvlibroject Window.vi >> Project Window.lvlib:Command Loop.vi >> NI_VS Workspace ExecutionAPI.lvlib:NI VeriStand - Connect to System.vi
Possible reason(s):
LabVIEW: The data type of the reference does not match the data type of the variable.
=========================
NI VeriStand: NI VeriStand Engine.lvlib:VeriStand Engine Wrapper (RT).vi >> NI VeriStand Engine.lvlib:VeriStand Engine.vi >> NI VeriStand Engine.lvlib:VeriStand Engine State Machine.vi >> NI VeriStand Engine.lvlib:Initialize Inline Custom Devices.vi >> Custom Devices Storage.lvlib:Initialize Device (HW Interface).vi
• Sending reset command to all targets...
• Stopping TCP loops.
Waiting for TCP loops to shut down...
• TCP loops shut down successfully.
• Unloading System Definition file...
• Connection with target Controller has been lost.

Can you deploy if you only have the two 9401 modules in the chassis (no other modules) and in the sysdef? I meant to ask if you could attach your system definition file to the forum post so we can see it as well (sorry for the confusion).
Are you using any of the specialty configurations for the 9401 modules? (ex: counter, PWM, quadrature, etc)
You will probably want to post this on the support page for the Scan Engine/EtherCAT Custom Device: https://decibel.ni.com/content/thread/8671
Custom devices aren't officially supported by NI, so technical questions and issues are handled on the above page.
Kevin W.
Applications Engineer
National Instruments

Data folder can not be opened in finding " AirPort Time Capsule " The operation can not be completed because the original item for " data" does not exist .

Hi
I have a " AirPort Time Capsule " (firmware 7.7.3) When I try to open the data folder in "finder". Then I got the message " The operation can not be completed because the original item for " data" does not exist". I have a lot of data and I can understand why I get this message?
Anyone who can help? Thanks..
Br. Bo

Get a USB drive of 2TB or more.. assuming your TC is 2TB. Either preformatted Mac or plug into your Mac and format it standard Mac OS Extended Journaled in disk utility.
Do a full archive of the TC. You do this using airport utility. Do not click the erase disk.. I marked in green.. just the archive.. that is to backup the internal disk to the USB disk. It is not fast.. take it that the process will go at around 40-50GB/hr.
Once you complete the archive .. it is a direct image of the data on your TC.. you can then plug it into your computer directly.. and then try and open the files you lost.. if you cannot open them.. open disk utility and fix the permissions.
http://osxdaily.com/2015/01/13/repair-disk-permissions-mac-os-x/
Or try the methods apple recommends..
OS X Yosemite: Set permissions for items on your Mac
It is possible to fix things on the USB drive because it is locally mounted.. but you cannot fix it on TC which is network drive.

BI Publisher Word Template The report does not contain any data fields.

I have OBIEE BI Publisher report (10.3.4) working fine using BIP but using MS Word 2003 I want to create new template and want to add charts etc.
Step 1. In MS Word I successfully login Oracle BI Publisher as Administrator
2. Oracle BI Publisher -> Open (I open the report)
3. Go to Insert -> Table Wizard
I get this error:
The report does not contain any data fields. Please make sure that the reports generates data with the default settings or provide a valid XML file.
Please help

Hi
How do I load XML data? Also why XML data load is required? Do I have to export XML data from BIP View screen and load from the same file from the word?
Please clarify
Thanks

New 13" Macbook Pro trying to connect to a Panasonic VIERA TC-L42U30 as second monitor. I've used multiple hdmi-thunderbolt/mini displayport adapters and multiple hdmi cables and still no success. The Macbook does not sense the second monitor (TV). Help?!

I've been a Mac since 2008, so I know my way around the system pretty well. This issue, however, has me stumped. I had an iMac until now and only now am I experiencing some difficulty with my new MacBook Pro. The model I have is the newest 13" Macbook Pro model and I'm trying to connect a Panasonic VIERA TC-L42U30 42" HDTV as a second monitor via the Thunderbolt port.
It worked the first two times and hasn't worked since, after 10-15 attempts with different configurations, turning things on n off, restarting the mac, unplugging the cables, adapters, TV, resetting the P RAM, etc... I've used multiple hdmi-thunderbolt/mini displayport adapters and multiple hdmi cables and still no success. No matter what I do, the Macbook does not sense the TV as a second monitor anymore.
I took the MacBook Pro to the Apple Store, and their "genius" there had it working fine with a DVI connection to a regular monitor. The Panasonic TV I have has HDMI connections and one VGA connection which does not support HD, but no DVI option. I want an HD connection to mirror or extend my MacBook Pro screen. At the Apple Store, they didn't have a Thunderbolt/Mini DisplayPort to HDMI adapter, so he could not try that out for me.
Anyone else have this configuration or another similar one with a Panasonic HDTV?
Ideas? Suggestions? Anything?! Help!!
P.S. I'm running Mountain Lion, if that wasn't already obvious. Everything is up to date in my App Store as well.
Thanks!

Hi There,
I have had the exact same issue but with a projector.
The issue lies with Mountian Lion 10.8.2.
I tried many a combination with no luck to get HDMI working.
Took my mac into the apple store and came to the conclusion it was the software, so I asked them to install 10.8 onto it (this is destructive so a backup is a must)
Bought my macbook home and voila, now displaying through my projector.
There is a small graphics update after 10.8.1 which seems to be the cause.
Hope this helps.
Thanks.

Job Cancelled with an error "Data does not match the job def: Job terminat"

Dear Friends,
The following job is with respect to an inbound interface that transfers data into SAP.
The file mist.txt is picked from the /FI/in directory of the application server and is moved to the /FI/work directory of application server for processing. Once the program ends up without any error, the file is moved to /FI/archive directory.
The below are the steps listed in job log, no spool is generated for this job and it ended up with an error "Data does not match the job definition; job terminated".Please see below for more info.
1.Job   Started
2.Step 001 started (program Y_SAP_FI_POST, variant MIST, user ID K364646)
3.File mist.txt copied from /data/sap/ARD/interface/FI/in/ to /data/sap/ARD/interface/FI/work/.
4.File mist.txt deleted from /data/sap/ARD/interface/FI/in/.
5.File mist.txt read from /data/sap/ARD/interface/FI/work/.
6.PD-DKLY-Y_SAP_FI_POST: This job was started periodically or directly from SM36/SM37 (Message Class: BD, Message Number : 076)
7.Job PD-DKLY-Y_SAP_FI_POST: Data does not match the job definition; job terminated (Message Class : BD, Message No. 078)
8.Job cancelled after system exception
ERROR_MESSAGE
Could you please analyse and come up about under what circumstance the above error is reported.
As well I heard that because of the customization issues in T.Code BMV0, the above error has raised.
Also please note that we can define as well schedule jobs from the above transaction and the corresponding data is stored in the table TBICU
My Trials
1. Tested uplaoding an empty file
2. Tested uploading with wrong data
3. Tested uploading with improper data that has false file structue
But failed to simulate the above scenario.
Clarification Required
Assume that I have defined a job using BMV0. Is that mandatory to use the same job in SM37/SM36 for scheduling?
Is the above question valid?
Edited by: dharmendra gali on Jan 28, 2008 6:06 AM

Dear Friends,
_Urgent : Please work on this ASAP _
The following job is with respect to an inbound interface that transfers data into SAP.
The file mist.txt is picked from the /FI/in directory of the application server and is moved to the /FI/work directory of application server for processing. Once the program ends up without any error, the file is moved to /FI/archive directory.
The below are the steps listed in job log, no spool is generated for this job and it ended up with an error "Data does not match the job definition; job terminated".Please see below for more info.
1.Job Started
2.Step 001 started (program Y_SAP_FI_POST, variant MIST, user ID K364646)
3.File mist.txt copied from /data/sap/ARD/interface/FI/in/ to /data/sap/ARD/interface/FI/work/.
4.File mist.txt deleted from /data/sap/ARD/interface/FI/in/.
5.File mist.txt read from /data/sap/ARD/interface/FI/work/.
6.PD-DKLY-Y_SAP_FI_POST: This job was started periodically or directly from SM36/SM37 (Message Class: BD, Message Number : 076)
7.Job PD-DKLY-Y_SAP_FI_POST: Data does not match the job definition; job terminated (Message Class : BD, Message No. 078)
8.Job cancelled after system exception
ERROR_MESSAGE
Could you please analyse and come up about under what circumstance the above error is reported.
As well I heard that because of the customization issues in T.Code BMV0, the above error has raised.
Also please note that we can define as well schedule jobs from the above transaction and the corresponding data is stored in the table TBICU
My Trials
1. Tested uplaoding an empty file
2. Tested uploading with wrong data
3. Tested uploading with improper data that has false file structue
But failed to simulate the above scenario.
Clarification Required
Assume that I have defined a job using BMV0. Is that mandatory to use the same job in SM37/SM36 for scheduling?
Is the above question valid?

The data does not encrypt using Wallet!

Similar Messages

Maybe you are looking for