The directory service is missing mandatory configuration information, and is unable to determine the ownership of floating single-master operation roles.
We are in the process of removing a child domain from the forest and are down to two DCs. These are both Server 2008r2 sp1 servers, one physical and virtual (PDC). When I try to remove a DC (not the PDC emulator) I get the following error:
The operation failed because:
Active Directory Domain Services could not transfer the remaining data in directory partition DC=DomainDnsZones,DC=mydomain,DC=local to
Active Directory Domain Controller \\V-Svr03.mydomain.local.
The directory service is missing mandatory configuration information, and is unable to determine the ownership of floating single-master operation roles."
I have checked replication with repadmin /showrepl and all connections were successful. The dcdiag /test:kccEvent test on all servers passed.
Most DCdiag tests are successful. The only failure is on NCSecDesc when running dcdiag /test:NCSecDesc
Testing server: Default-First-Site\DC1-DEV-OFC
Starting test: NCSecDesc
Error NT AUTHORITY\ENTERPRISE DOMAIN CONTROLLERS doesn't have
Replicating Directory Changes In Filtered Set
access rights for the naming context:
DC=ForestDnsZones,DC=hookemup,DC=local
......................... DC1-DEV-OFC failed test NCSecDesc
In researching this I find "If you do not plan to add an RODC to the forest, you can disregard this error."
We have not successfully run ADprep /rodcPrep nor do we plan on having any Read-Only DCs, so I think we can ignor this error. We did try running ADprep /rodcPrep but got an LDAP error which I can duplicate if this is important.
Schema and Naming FSMOs are on a DC higher in the forest. RID, PDC, and Infrastructure FSMOs for the child domain are on the Virtual server (PDC).
Any guidance on where to go from here would be greatly appreciated as I have no more hair on my head to pull.
Ok... I ran repadmin /showreps /v again and it shows no errors
C:\>repadmin /showreps /v
Default-First-Site\DC1-DEV-OFC
DSA Options: IS_GC
Site Options: (none)
DSA object GUID: b294c59f-8b46-4133-89c5-0f30bfd49607
DSA invocationID: 1054285d-cffe-42b4-8074-e2d44adbb151
==== INBOUND NEIGHBORS ======================================
CN=Configuration,DC=mydomain,DC=local
Default-First-Site\HESTIA via RPC
DSA object GUID: b464fde9-29d7-4490-9582-fe9270050d50
Address: b464fde9-29d7-4490-9582-fe9270050d50._msdcs.mydomain.local
DSA invocationID: afea3845-9fa8-40a6-a477-84348a206348
SYNC_ON_STARTUP DO_SCHEDULED_SYNCS WRITEABLE
USNs: 16381490/OU, 16381490/PU
Last attempt @ 2012-10-29 13:52:39 was successful.
Default-First-Site\V-SVR03 via RPC
DSA object GUID: 53018cc4-b8c9-48ce-9a54-1b987e7b08c8
Address: 53018cc4-b8c9-48ce-9a54-1b987e7b08c8._msdcs.mydomain.local
DSA invocationID: 45de2c10-ec8b-443d-a645-db4e0a352a23
SYNC_ON_STARTUP DO_SCHEDULED_SYNCS WRITEABLE
USNs: 114817/OU, 114817/PU
Last attempt @ 2012-10-29 13:52:39 was successful.
Default-First-Site\V-SVR01 via RPC
DSA object GUID: e2f794eb-9658-4bad-b695-3d8c08f46371
Address: e2f794eb-9658-4bad-b695-3d8c08f46371._msdcs.mydomain.local
DSA invocationID: 07bb0fe9-bca9-46d1-92ce-308d36da478d
SYNC_ON_STARTUP DO_SCHEDULED_SYNCS WRITEABLE
USNs: 66047/OU, 66047/PU
Last attempt @ 2012-10-29 13:52:39 was successful.
Default-First-Site\ATHENA via RPC
DSA object GUID: cb00a5b0-6dea-473c-bb42-19356dd9ed36
Address: cb00a5b0-6dea-473c-bb42-19356dd9ed36._msdcs.mydomain.local
DSA invocationID: 57313a9c-46a2-4b94-87cc-b3f91d54faed
SYNC_ON_STARTUP DO_SCHEDULED_SYNCS WRITEABLE
USNs: 8098197/OU, 8098197/PU
Last attempt @ 2012-10-29 13:52:39 was successful.
CN=Schema,CN=Configuration,DC=mydomain,DC=local
Default-First-Site\ATHENA via RPC
DSA object GUID: cb00a5b0-6dea-473c-bb42-19356dd9ed36
Address: cb00a5b0-6dea-473c-bb42-19356dd9ed36._msdcs.mydomain.local
DSA invocationID: 57313a9c-46a2-4b94-87cc-b3f91d54faed
SYNC_ON_STARTUP DO_SCHEDULED_SYNCS WRITEABLE
USNs: 8097482/OU, 8097482/PU
Last attempt @ 2012-10-29 13:52:39 was successful.
Default-First-Site\V-SVR01 via RPC
DSA object GUID: e2f794eb-9658-4bad-b695-3d8c08f46371
Address: e2f794eb-9658-4bad-b695-3d8c08f46371._msdcs.mydomain.local
DSA invocationID: 07bb0fe9-bca9-46d1-92ce-308d36da478d
SYNC_ON_STARTUP DO_SCHEDULED_SYNCS WRITEABLE
USNs: 65239/OU, 65239/PU
Last attempt @ 2012-10-29 13:52:39 was successful.
Default-First-Site\V-SVR03 via RPC
DSA object GUID: 53018cc4-b8c9-48ce-9a54-1b987e7b08c8
Address: 53018cc4-b8c9-48ce-9a54-1b987e7b08c8._msdcs.mydomain.local
DSA invocationID: 45de2c10-ec8b-443d-a645-db4e0a352a23
SYNC_ON_STARTUP DO_SCHEDULED_SYNCS WRITEABLE
USNs: 114149/OU, 114149/PU
Last attempt @ 2012-10-29 13:52:39 was successful.
Default-First-Site\HESTIA via RPC
DSA object GUID: b464fde9-29d7-4490-9582-fe9270050d50
Address: b464fde9-29d7-4490-9582-fe9270050d50._msdcs.mydomain.local
DSA invocationID: afea3845-9fa8-40a6-a477-84348a206348
SYNC_ON_STARTUP DO_SCHEDULED_SYNCS WRITEABLE
USNs: 16381373/OU, 16381373/PU
Last attempt @ 2012-10-29 13:52:39 was successful.
DC=ForestDnsZones,DC=mydomain,DC=local
Default-First-Site\V-SVR01 via RPC
DSA object GUID: e2f794eb-9658-4bad-b695-3d8c08f46371
Address: e2f794eb-9658-4bad-b695-3d8c08f46371._msdcs.mydomain.local
DSA invocationID: 07bb0fe9-bca9-46d1-92ce-308d36da478d
SYNC_ON_STARTUP DO_SCHEDULED_SYNCS WRITEABLE
USNs: 66295/OU, 66295/PU
Last attempt @ 2012-10-29 13:57:48 was successful.
Default-First-Site\ATHENA via RPC
DSA object GUID: cb00a5b0-6dea-473c-bb42-19356dd9ed36
Address: cb00a5b0-6dea-473c-bb42-19356dd9ed36._msdcs.mydomain.local
DSA invocationID: 57313a9c-46a2-4b94-87cc-b3f91d54faed
SYNC_ON_STARTUP DO_SCHEDULED_SYNCS WRITEABLE
USNs: 8098367/OU, 8098367/PU
Last attempt @ 2012-10-29 13:58:13 was successful.
Default-First-Site\V-SVR03 via RPC
DSA object GUID: 53018cc4-b8c9-48ce-9a54-1b987e7b08c8
Address: 53018cc4-b8c9-48ce-9a54-1b987e7b08c8._msdcs.mydomain.local
DSA invocationID: 45de2c10-ec8b-443d-a645-db4e0a352a23
SYNC_ON_STARTUP DO_SCHEDULED_SYNCS WRITEABLE
USNs: 115032/OU, 115032/PU
Last attempt @ 2012-10-29 13:58:25 was successful.
Default-First-Site\HESTIA via RPC
DSA object GUID: b464fde9-29d7-4490-9582-fe9270050d50
Address: b464fde9-29d7-4490-9582-fe9270050d50._msdcs.mydomain.local
DSA invocationID: afea3845-9fa8-40a6-a477-84348a206348
SYNC_ON_STARTUP DO_SCHEDULED_SYNCS WRITEABLE
USNs: 16381653/OU, 16381653/PU
Last attempt @ 2012-10-29 13:58:34 was successful.
DC=mySUBdomain,DC=local
Default-First-Site\V-SVR03 via RPC
DSA object GUID: 53018cc4-b8c9-48ce-9a54-1b987e7b08c8
Address: 53018cc4-b8c9-48ce-9a54-1b987e7b08c8._msdcs.mydomain.local
DSA invocationID: 45de2c10-ec8b-443d-a645-db4e0a352a23
SYNC_ON_STARTUP DO_SCHEDULED_SYNCS WRITEABLE
USNs: 114871/OU, 114871/PU
Last attempt @ 2012-10-29 13:54:02 was successful.
DC=DomainDnsZones,DC=mySUBdomain,DC=local
Default-First-Site\V-SVR03 via RPC
DSA object GUID: 53018cc4-b8c9-48ce-9a54-1b987e7b08c8
Address: 53018cc4-b8c9-48ce-9a54-1b987e7b08c8._msdcs.mydomain.local
DSA invocationID: 45de2c10-ec8b-443d-a645-db4e0a352a23
SYNC_ON_STARTUP DO_SCHEDULED_SYNCS WRITEABLE
USNs: 114017/OU, 114017/PU
Last attempt @ 2012-10-29 13:52:39 was successful.
DC=mydomain,DC=local
Default-First-Site\V-SVR03 via RPC
DSA object GUID: 53018cc4-b8c9-48ce-9a54-1b987e7b08c8
Address: 53018cc4-b8c9-48ce-9a54-1b987e7b08c8._msdcs.mydomain.local
DSA invocationID: 45de2c10-ec8b-443d-a645-db4e0a352a23
SYNC_ON_STARTUP DO_SCHEDULED_SYNCS
USNs: 114017/OU, 114017/PU
Last attempt @ 2012-10-29 13:52:39 was successful.
Default-First-Site\HESTIA via RPC
DSA object GUID: b464fde9-29d7-4490-9582-fe9270050d50
Address: b464fde9-29d7-4490-9582-fe9270050d50._msdcs.mydomain.local
DSA invocationID: afea3845-9fa8-40a6-a477-84348a206348
SYNC_ON_STARTUP DO_SCHEDULED_SYNCS
USNs: 16381614/OU, 16381614/PU
Last attempt @ 2012-10-29 13:56:52 was successful.
Default-First-Site\V-SVR01 via RPC
DSA object GUID: e2f794eb-9658-4bad-b695-3d8c08f46371
Address: e2f794eb-9658-4bad-b695-3d8c08f46371._msdcs.mydomain.local
DSA invocationID: 07bb0fe9-bca9-46d1-92ce-308d36da478d
SYNC_ON_STARTUP DO_SCHEDULED_SYNCS
USNs: 66325/OU, 66325/PU
Last attempt @ 2012-10-29 13:58:34 was successful.
Default-First-Site\ATHENA via RPC
DSA object GUID: cb00a5b0-6dea-473c-bb42-19356dd9ed36
Address: cb00a5b0-6dea-473c-bb42-19356dd9ed36._msdcs.mydomain.local
DSA invocationID: 57313a9c-46a2-4b94-87cc-b3f91d54faed
SYNC_ON_STARTUP DO_SCHEDULED_SYNCS
USNs: 8098385/OU, 8098385/PU
Last attempt @ 2012-10-29 13:58:38 was successful.
Similar Messages
-
hello, pls how do i fix this issue, the two scripts ran on first node, but failed on second node, after running cluvfy this is the output:
using cluvfy for storage requirements
Verifying shared storage accessibility
Checking shared storage accessibility...
WARNING:
Unable to determine the sharedness of /dev/sda on nodes:
rac2,rac1
WARNING:
Unable to determine the sharedness of /dev/sdb on nodes:
rac2,rac1
WARNING:
Unable to determine the sharedness of /dev/sdc on nodes:
rac2,rac1
WARNING:
Unable to determine the sharedness of /dev/sdd on nodes:
rac2
Shared storage check failed on nodes "rac2,rac1".
Verification of shared storage accessibility was unsuccessful on all the nodes.
using cluvfy for system requirements
Verifying system requirement
Checking system requirements for 'crs'...
Check: Total memory
Node Name Available Required Comment
rac2 1011.13MB (1035400KB) 1GB (1048576KB) failed
rac1 1011.13MB (1035400KB) 1GB (1048576KB) failed
Result: Total memory check failed.
Check: Free disk space in "/tmp" dir
Node Name Available Required Comment
rac2 1.07GB (1119972KB) 400MB (409600KB) passed
rac1 1.09GB (1141784KB) 400MB (409600KB) passed
Result: Free disk space check passed.
Check: Swap space
Node Name Available Required Comment
rac2 2GB (2096472KB) 1.5GB (1572864KB) passed
rac1 2GB (2096472KB) 1.5GB (1572864KB) passed
Result: Swap space check passed.
Check: System architecture
Node Name Available Required Comment
rac2 i686 i686 passed
rac1 i686 i686 passed
Result: System architecture check passed.
Check: Kernel version
Node Name Available Required Comment
rac2 2.6.18-8.el5 2.6.9 passed
rac1 2.6.18-8.el5 2.6.9 passed
Result: Kernel version check passed.
Check: Package existence for "make-3.81"
Node Name Status Comment
rac2 make-3.81-1.1 passed
rac1 make-3.81-1.1 passed
Result: Package existence check passed for "make-3.81".
Check: Package existence for "binutils-2.17.50.0.6"
Node Name Status Comment
rac2 binutils-2.17.50.0.6-2.el5 passed
rac1 binutils-2.17.50.0.6-2.el5 passed
Result: Package existence check passed for "binutils-2.17.50.0.6".
Check: Package existence for "gcc-4.1.1"
Node Name Status Comment
rac2 gcc-4.1.1-52.el5 passed
rac1 gcc-4.1.1-52.el5 passed
Result: Package existence check passed for "gcc-4.1.1".
Check: Package existence for "libaio-0.3.106"
Node Name Status Comment
rac2 libaio-0.3.106-3.2 passed
rac1 libaio-0.3.106-3.2 passed
Result: Package existence check passed for "libaio-0.3.106".
Check: Package existence for "libaio-devel-0.3.106"
Node Name Status Comment
rac2 libaio-devel-0.3.106-3.2 passed
rac1 libaio-devel-0.3.106-3.2 passed
Result: Package existence check passed for "libaio-devel-0.3.106".
Check: Package existence for "libstdc++-4.1.1"
Node Name Status Comment
rac2 libstdc++-4.1.1-52.el5 passed
rac1 libstdc++-4.1.1-52.el5 passed
Result: Package existence check passed for "libstdc++-4.1.1".
Check: Package existence for "elfutils-libelf-devel-0.125"
Node Name Status Comment
rac2 elfutils-libelf-devel-0.125-3.el5 passed
rac1 elfutils-libelf-devel-0.125-3.el5 passed
Result: Package existence check passed for "elfutils-libelf-devel-0.125".
Check: Package existence for "sysstat-7.0.0"
Node Name Status Comment
rac2 sysstat-7.0.0-3.el5 passed
rac1 sysstat-7.0.0-3.el5 passed
Result: Package existence check passed for "sysstat-7.0.0".
Check: Package existence for "compat-libstdc++-33-3.2.3"
Node Name Status Comment
rac2 missing failed
rac1 missing failed
Result: Package existence check failed for "compat-libstdc++-33-3.2.3".
Check: Package existence for "libgcc-4.1.1"
Node Name Status Comment
rac2 libgcc-4.1.1-52.el5 passed
rac1 libgcc-4.1.1-52.el5 passed
Result: Package existence check passed for "libgcc-4.1.1".
Check: Package existence for "libstdc++-devel-4.1.1"
Node Name Status Comment
rac2 libstdc++-devel-4.1.1-52.el5 passed
rac1 libstdc++-devel-4.1.1-52.el5 passed
Result: Package existence check passed for "libstdc++-devel-4.1.1".
Check: Package existence for "unixODBC-2.2.11"
Node Name Status Comment
rac2 unixODBC-2.2.11-7.1 passed
rac1 unixODBC-2.2.11-7.1 passed
Result: Package existence check passed for "unixODBC-2.2.11".
Check: Package existence for "unixODBC-devel-2.2.11"
Node Name Status Comment
rac2 unixODBC-devel-2.2.11-7.1 passed
rac1 unixODBC-devel-2.2.11-7.1 passed
Result: Package existence check passed for "unixODBC-devel-2.2.11".
Check: Package existence for "glibc-2.5-12"
Node Name Status Comment
rac2 glibc-2.5-12 passed
rac1 glibc-2.5-12 passed
Result: Package existence check passed for "glibc-2.5-12".
Check: Group existence for "dba"
Node Name Status Comment
rac2 exists passed
rac1 exists passed
Result: Group existence check passed for "dba".
Check: Group existence for "oinstall"
Node Name Status Comment
rac2 exists passed
rac1 exists passed
Result: Group existence check passed for "oinstall".
Check: User existence for "nobody"
Node Name Status Comment
rac2 exists passed
rac1 exists passed
Result: User existence check passed for "nobody".
System requirement failed for 'crs'
Verification of system requirement was unsuccessful on all the nodes.
cluvfy check for node connectivity
Verifying node connectivity
Checking node connectivity...
Interface information for node "rac2"
Interface Name IP Address Subnet Subnet Gateway Default Gateway Hardware Address
eth0 192.168.2.102 192.168.2.0 0.0.0.0 192.168.2.1 00:0C:29:4D:18:BA
eth1 192.168.0.102 192.168.0.0 0.0.0.0 192.168.2.1 00:0C:29:4D:18:C4
Interface information for node "rac1"
Interface Name IP Address Subnet Subnet Gateway Default Gateway Hardware Address
eth0 192.168.2.101 192.168.2.0 0.0.0.0 192.168.2.1 00:0C:29:A5:25:87
eth1 192.168.0.101 192.168.0.0 0.0.0.0 192.168.2.1 00:0C:29:A5:25:91
Check: Node connectivity of subnet "192.168.2.0"
Source Destination Connected?
rac2:eth0 rac1:eth0 yes
Result: Node connectivity check passed for subnet "192.168.2.0" with node(s) rac2,rac1.
Check: Node connectivity of subnet "192.168.0.0"
Source Destination Connected?
rac2:eth1 rac1:eth1 yes
Result: Node connectivity check passed for subnet "192.168.0.0" with node(s) rac2,rac1.
Interfaces found on subnet "192.168.2.0" that are likely candidates for a private interconnect:
rac2 eth0:192.168.2.102
rac1 eth0:192.168.2.101
Interfaces found on subnet "192.168.0.0" that are likely candidates for a private interconnect:
rac2 eth1:192.168.0.102
rac1 eth1:192.168.0.101
WARNING:
Could not find a suitable set of interfaces for VIPs.
Result: Node connectivity check passed.
Verification of node connectivity was successful.
Verifying administrative privileges
Checking user equivalence...
Check: User equivalence for user "oracle"
Node Name Comment
rac2 passed
rac1 passed
Result: User equivalence check passed for user "oracle".
Verification of administrative privileges was successful.Hi,
Refer --- *19. Pre-Installation Tasks for Oracle Clusterware* section from the below link:
http://www.oracle.com/technology/pub/articles/hunter_rac11gr1_iscsi_2.html
See this thread also seems to be same with ur issue:
Clusterware (Unable to determine the sharedness of) in VMware 2.0x server
Regards,
Xaheer -
Unable to print from MS Word: "The Directory Service is currently unavailable"
Hi! I hope you can help me. Please note that I have a Windows XP computer (Home Edition, Version 2002, Service Pack 3, 32-bit). When I initially installed a Brother printer (model# MFC-J475DW) in Dec 2013, I had no problems printing documents. My problems
started about 2 days ago. I got an error message after I opened a MS Word document (.doc) and clicked the Print button to print a document. The Printer "Name" field was empty. I clicked the dropdown box in that window and saw 3 options:
1 - Brother MFC-J475DW Printer
2 - Brother PC-FAX v.3.2
3 - PaperPort Image Printer
When I selected "Brother MFC-J475DW Printer," a Microsoft Word dialog box appeared, saying the following:
"The printer has not yet responded, but the Microsoft Office program may be able to proceed without printer information. Do you want to continue to wait for the printer?"
I can either click on a Yes button or a No button. Either way, I'm brought back to the Print page. When I click on the OK button to start printing, another error message appears:
"Windows cannot print due to a problem with the current printer setup. Try one or more of the following:
*Check the printer by printing a test page from Windows.
*Make sure the printer is turned on and online.
*Reinstall the printer driver."
I have a choice to click either OK or Web Help. I click the OK button to close the box, then return to the Print page. When I click on the "Find Printer..." button, the Find Printers window appears for a moment, then is replaced by this error message:
"The Directory Service is currently unavailable"
On Friday (Mar 21), when the error first occurred, I was able to print a letter in MS Word after un- and re-installing the Brother printer and its drivers. The problem reappeared the next day (Saturday). I don't want to do that every time to print a single
page, so would you please recommend a solution?
By the way, I am able to print a test page from the printer in Control Panel, and I can print from a Notepad document. Also, when I go to the Control Panel, select "Printers and Faxes," then right-click on the printer (Brother MFC-J475DW Printer),
then select the Ports page, there's a check mark next to USB001 (not LPT1 or COM1). When I click on the "Configure Port..." button, I get this error message:
"An error occurred during port configuration. This operation is not supported."
Earlier today, I got a reply from brother.com's tech support (thanks to the 1 year warranty). They said the problem is on my PC, not their printer. However, they provided links to completely uninstall the printer, then reinstall it. I did just that, but
the problem persists. I'll download OpenOffice.org's Office Suite to see if I can print documents with their software instead of MS Word. Until then, I await any suggestions.
I hope this info is helpful. Thanks in advance for your help.I downloaded OpenOffice and am able to print documents (in particular, the same document I created in MS Word). I guess MS Word is to blame. I believe the issue is concluded, but I'd welcome any comments about the Active Directory, as I might have a problem
with OpenOffice in the future regarding that. -
Unable to create database entry in the directory service. - TNS-04
We run into this error when we tried to register an Oracle 10.2.0.4 database with OID server (10.1.4.3):
Unable to create database entry in the directory service. - TNS-04409: Directory service error
We use Oracle DBCA to register to the OID. Both Oracle database and OID server are all running under Sun Solaris environment.
In the meantime, I found these errors in the oid logs:
oidldapd01.log:
2009/07/13:21:15:47 * DispatcherListener:2 * ERROR : gslsflAcceptConnAndSend : OS 2 : Unable to accept New TCP
connection
Any ideas?
Thanks
NaiyingHi,
Thanks for update.
No, didn't find DSCC agent logs get updated when I have the pop up.
C:\dsee7\var\dcc\agent\logs
In the glassfish server log, I didn't find new transaction when I hit the issue
C:\glassfish3\glassfish\domains\domain1\logs -
I'm trying to setup Database Mail and send a test message, but it's not working.
I've done several step-by-steps and all and I can't get it to work. Also checked several posts in this forum but none helped. I think it used to work before (2 months ago) but we had to turn it off.
I've enabled it in Surface Configuration, have tried recreating all profiles, restarted SQL Agent, checked version mismatch...
I check the Database Mail and I get the following message:
Log Database Mail (Database Mail Log)
Log ID 152
Process ID 7684
Last Modified 3/14/2013 6:49:58 PM
Last Modified By SPEEDLING\sqlservice
Message
1) Exception Information
===================
Exception Type: Microsoft.SqlServer.Management.SqlIMail.Server.Common.BaseException
Message: Mail configuration information could not be read from the database.
Data: System.Collections.ListDictionaryInternal
TargetSite: Microsoft.SqlServer.Management.SqlIMail.Server.Objects.Account GetAccount(Int32)
HelpLink: NULL
Source: DatabaseMailEngine
StackTrace Information
===================
at Microsoft.SqlServer.Management.SqlIMail.Server.DataAccess.DataAccessAdapter.GetAccount(Int32 accountID)
at Microsoft.SqlServer.Management.SqlIMail.Server.Controller.CommandFactory.CreateSendMailCommand(DBSession dbSession)
at Microsoft.SqlServer.Management.SqlIMail.Server.Controller.CommandRunner.Run(DBSession db)
at Microsoft.SqlServer.Management.SqlIMail.IMailProcess.ThreadCallBack.MailOperation(Object o)
2) Exception Information
===================
Exception Type: System.IndexOutOfRangeException
Message: timeout
Data: System.Collections.ListDictionaryInternal
TargetSite: Int32 GetOrdinal(System.String)
HelpLink: NULL
Source: System.Data
StackTrace Information
===================
at System.Data.ProviderBase.FieldNameLookup.GetOrdinal(String fieldName)
at System.Data.SqlClient.SqlDataReader.GetOrdinal(String name)
at System.Data.SqlClient.SqlDataReader.get_Item(String name)
at Microsoft.SqlServer.Management.SqlIMail.Server.DataAccess.DataAccessAdapter.GetAccount(Int32 accountID)I'm trying to setup Database Mail and send a test message, but it's not working.
I've done several step-by-steps and all and I can't get it to work. Also checked several posts in this forum but none helped. I think it used to work before (2 months ago) but we had to turn it off.
I've enabled it in Surface Configuration, have tried recreating all profiles, restarted SQL Agent, checked version mismatch...
I check the Database Mail and I get the following message:
Log
Database Mail (Database Mail Log)
Log ID
152
Process ID
7684
Last Modified
3/14/2013 6:49:58 PM
Last Modified By
SPEEDLING\sqlservice
Message
1) Exception Information
===================
Exception Type: Microsoft.SqlServer.Management.SqlIMail.Server.Common.BaseException
Message: Mail configuration information could not be read from the database.
Data: System.Collections.ListDictionaryInternal
TargetSite: Microsoft.SqlServer.Management.SqlIMail.Server.Objects.Account GetAccount(Int32)
HelpLink: NULL
Source: DatabaseMailEngine
StackTrace Information
===================
at Microsoft.SqlServer.Management.SqlIMail.Server.DataAccess.DataAccessAdapter.GetAccount(Int32 accountID)
at Microsoft.SqlServer.Management.SqlIMail.Server.Controller.CommandFactory.CreateSendMailCommand(DBSession
dbSession)
at Microsoft.SqlServer.Management.SqlIMail.Server.Controller.CommandRunner.Run(DBSession db)
at Microsoft.SqlServer.Management.SqlIMail.IMailProcess.ThreadCallBack.MailOperation(Object o)
2) Exception Information
===================
Exception Type: System.IndexOutOfRangeException
Message: timeout
Data: System.Collections.ListDictionaryInternal
TargetSite: Int32 GetOrdinal(System.String)
HelpLink: NULL
Source: System.Data
StackTrace Information
===================
at System.Data.ProviderBase.FieldNameLookup.GetOrdinal(String fieldName)
at System.Data.SqlClient.SqlDataReader.GetOrdinal(String name)
at System.Data.SqlClient.SqlDataReader.get_Item(String name)
at Microsoft.SqlServer.Management.SqlIMail.Server.DataAccess.DataAccessAdapter.GetAccount(Int32 accountID) -
"The Directory Service is Busy." Error Message When Trying to Rename PCs on AD 2012 R2 Domain
As the title says, I'm trying to rename some existing PCs on a Windows 2012 R2 Active Directory domain, but I keep getting the error: The
Directory Service is Busy.
The command I am using is:
netdom renamecomputer <OLD_NAME> /newname:<NEW_NAME> /ud:DOMAIN\user /pd:* /force /reboot:300
This command works on some machines but not others. Using Powershell elicits the same response. Any troubleshooting suggestions?
(this is cross post from Powershell here: https://social.technet.microsoft.com/Forums/windowsserver/en-US/b82cc024-4c33-47a7-bfb7-85a0a03ff357/the-directory-service-is-busy-error-message-when-trying-to-rename-pcs-on-ad-2012-r2-domain?forum=winserverpowershell)Hi,
Considering that your issue isn't really PowerShell specific I'd probably try asking this question over in the Directory Services forum:
https://social.technet.microsoft.com/Forums/en-us/home?forum=winserverDS&filter=alltypes&sort=lastpostdesc
Perhaps someone here will have some answers for you as well, but I imagine the DS forum will be your quickest route to an answer.
Don't retire TechNet! -
(Don't give up yet - 13,225+ strong and growing) -
The local node entry in Cluster Configuration information does not match wi
In installing 10.1.0.3 CRS on Solaris 8 x86, I keep getting the error, "The local node entry in Cluster Configuration information does not match with the entry in /etc file." Both addresses are defined in the /etc/inet/hosts and are pingable. There seems to be no way to get past this issue. Earlier I installed 10.2.0.1 CRS on SLES9 SP2 on a system with the same network settings and had no problem. Is there some way to force the installer to accept the addresses given and proceed past this step?
All,
I think there can be two problems
1.
if your host file looks as follows
# Public
192.168.2.x rac1.localdomain rac1
192.168.2.x rac2.localdomain rac2
#Private
192.168.0.x rac1-priv.localdomain rac1-priv
192.168.0.x rac2-priv.localdomain rac2-priv
#Virtual
192.168.2.x rac1-vip.localdomain rac1-vip
192.168.2.x rac2-vip.localdomain rac2-vip
then you should be able to do rsh or ssh sucessfully for each aliases at least one from each nodes
(ex)
on node rac1
ssh rac1 date
ssh rac1.localdomain date
ssh rac2 date
ssh rac2.localdomain date
2. you should create user equivalance on all the nodes as follows
Edit the /etc/hosts.equiv file to include all the RAC nodes:
+rac1 oracle
+rac2 oracle
+rac1-priv oracle
+rac2-priv oracle -
Greetings,
Trying to export users to an OU in a remote forest AD from FIM 2010 R2 and I keep getting this error back from the destination AD:
"The directory service has exhausted the pool of relative identifiers."
After reading up on this I went back to the AD owners of the forest and they said that they had seen this before and had applied this hotfix from Microsoft to give their RID pool another bit (now making 31bits)...
http://support.microsoft.com/kb/2642658/en-us
Now I can create a user in their AD without a problem within ADSI, but FIM can't; I just get a "cd-error" with the afore-mentioned error description of "The directory service has exhausted the pool of relative identifiers".
I have checked the RID Manager, I have got the dcdiag (below) and everything looks OK except for the fact they have run this hotfix?
Test omitted by user request: Replications
Starting test: RidManager
* Available RID Pool for the Domain is 1073746324 to 2147483647
* XXXXXXX is the RID Master
* DsBind with RID Master was successful
* rIDAllocationPool is 1073745324 to 1073745823
* rIDPreviousAllocationPool is 1073745324 to 1073745823
* rIDNextRID: 1073745324
Has anyone come across this issue regarding the hotfix before and, if so, how did you get around this via FIM?
Cheers,The work-around at the moment is to specify the IP address of the RID Pool manager server in the MA's preferred domain controller listing. Still working with the external forest as to why this is failing from the DC we initially connected to.
-
What is the password? registering database with the directory service
I'm currently installing Oracle Collaboration Suite and everything being going fine until the postinstallation tasks for Oracle email.
When I attempt to register the database with the directory service I'm not sure what I should be entering here.
The guide says:
cn=orcladmin should be entered in the User DN field but what is the password?
and should orcl be replaced with my sid I entered during installation?
I have tried a number of things but all I get is:
Invalid Directory Service Credentials
Thanks in advance for any help
Best Regards
CharlieNo worries - found note in documentation regarding default password
Thanks
Charlie -
When I go to share photos in iPhoto 11, The photos transfer to the email I'm sending but the photo information and location don't. The older version of iPhoto did it, why not this version? What am I missing in the process of sharing via email?, Thank You.
When you share to email do you get the following dialogue:
-
Hi Guys,
I am creating the library using object model with custom content type. When i am opening document from custom content type, the meta data fields are not displaying in the document and throwing below error.
The document information panel was unable to load. the document will continue to open. For more information, contact your system adminsitrator.
Document Information Panel cannot open a new form.
The form contains schema validation errors.
Content for element '{http://schemas.microsoft.com/office/2006/metadata/propertiesRoot}properties' is incomplete according to the DTD/Schema.
Expecting: {http://schemas.microsoft.com/office/2006/metadata/properties}properties.
But after saving the document, then meta data is enabled.
Thanks in advance for suggested solutions.
thanks
Santhosh GHi,
For a better troubleshooting, I suggest to do as follows:
1. Please try to update the Location column's schema by following the steps below.
1) Go to Site Settings -> "Site Columns"
2) Click on "Location", after the page is opened. Don't modify any settings, click "OK" to forcibly update the field's schema.
2. Re-edit the document information panel template to see if the issue still occurs.
Please go to the Library setting > click the corresponding content type(need to enable managed of content types in Advanced settings) > click Document Information Panel settings.
3. Here are some similar links about your issue, please take some time to look at them:
http://social.msdn.microsoft.com/Forums/en-US/sharepointcustomizationlegacy/thread/243b4852-3f17-4a3a-b6d7-187d65a5f088/
http://blogs.msdn.com/b/raresm/archive/2010/03/30/document-information-panel-cannot-open-the-form.aspx
https://joranmarkx.wordpress.com/2012/02/10/sharepoint-document-information-panel-cannot-create-a-new-blank-form/
If the issue still occurs, please check if the command below can help(change the site URL and the library name in the code):
Apply-Fix -siteUrl "http://your site URL "
function Apply-Fix($siteUrl)
clear
Add-PSSnapin "Microsoft.SharePoint.Powershell" -ErrorAction SilentlyContinue # -EA 0
[Environment]::CurrentDirectory=(Get-Location -PSProvider FileSystem).ProviderPath
foreach ($spwTarget in (Get-SPSite $siteUrl).RootWeb.Webs) {
Write-Host "Checking Web: " $spwTarget.Url
$list = $spwTarget.Lists["your library name"]
$fields = $list.fields
foreach($field in $fields)
if($field.SourceId -eq '{$ListId:your library name;}')
$schemaxml = $field.SchemaXML
$schemaxmldata = [xml]$schemaxml
$schemaxmldata.Field.SetAttribute("SourceID", $list.ID)
$schemaxml = $schemaxmldata.get_InnerXml()
$field.SchemaXML = $schemaxml
$field.Update()
Write-Host "Fixed" $field.Title "field in the library"
Write-Host "Done."
More information:
SharePoint 2010: Creating a Custom Content Type using Visual Studio
http://www.codeproject.com/Articles/410880/SharePoint-Creating-a-Custom-Content-Type-usi
Thanks,
Dennis Guo
TechNet Community Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected].
Dennis Guo
TechNet Community Support -
I have prepared a photo book, made a pdf and when I press "buy thhe book" it tells me that the book is missing photos on one ore more pages. The book does not miss any photos or text, all layouts are ok, the background color is ok. Can anybody help me?
You are missing one or more photos - youprobably have a page background that requires a photo which is behind a page with photos on it - all pages must either have a photo or be a color - if you have a gray background it requires a photo - look through the book carefully and be sure to look at the background on any full page photos - you will find one or more missing photos
LN -
Hi, using iphoto 6, i suddenly lost albums: they are still in the directory, but no pictures in some albums.Using finder, I can locate the pictures and even get preview. But impossible to import them. Anyone can help? thanks
Try these in order - from best option on down...
1. Do you have an up-to-date back up? If so, try copy the library6.iphoto file from the back up to the iPhoto Library allowing it to overwrite the damaged file.
2. Download <a href="http://www.fatcatsoftware.com/iplm/"><b><u>iPhoto Library Manager</b></u></a> and use its rebuild function. This will create a new library based on data in the albumdata.xml file. Not everything will be brought over - no slideshows, books or calendars, for instance - but it should get all your albums and keywords back.
Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one.
3. If neither of these work then you'll need to create and populate a new library.
To create and populate a new *iPhoto 6* library:
Note this will give you a working library with the same Rolls and pictures as before, however, you will lose your albums, keywords, modified versions, books, calendars etc.
Move the iPhoto Library to the desktop
Launch iPhoto. It will ask if you wish to create a new Library. Say Yes.
Go into the iPhoto Library on your desktop and find the Originals folder. From the Originals folder drag the individual Roll Folders to the iPhoto Window and it will recreate them in the new library.
When you're sure all is well you can delete the iPhoto Library on your desktop.
In the future, in addition to your usual back up routine, you might like to make a copy of the library6.iPhoto file whenever you have made changes to the library as protection against database corruption. -
The selection tool is missing from my tool bar in indesign. Instead the page tool is there. How do I get the selection tool back?
Your reply is blank. The forums do not accept attachments, so if that's how you tried to post a screen shot please come back to the web page and use the camera icon to embed it in a post, like this:
-
i get this error why i try and open the auto cad that i just downloaded
The directory may be locked by another process or have been set Read Only.
Directory: '/Users/hockaday'
Please correct this problem and press OK to exit the application.I did install it in the admin account. Actually the computer has four accounts, one for my husband, where I installed it. One for me which also is set to admin, one is called TEST and has nothing in it and one is guest user.
I don't know how AutoCad is interfacing with the account. That is why I am not sure what to do about it. I read other threads in various places and some seemed to point to something having to do with having multiple users. The solutions were not clear. I was hoping someone else had this problem and could tell me what to do. I tried apple support but no help. I have not tried AutoCad yet as I assumed they wont help since this is a free educational version of their product.
Maybe you are looking for
-
Mac OS 10.9.4 problems
I recently reinstalled Mac OS X, due to some hard drive problems. I was running the same version of Mac OS X before (10.9.4), and I had none of these problems. First, my Launchpad kept resetting, and all my applications would be taken out of their f
-
Global Address Cleansing with suggestion
Iu2019m using Global Address Cleansing with suggestion list enabled. The problem Iu2019m having is for that Canadian addresses are not populating the address related fields (i.e. primary name, number, etcu2026) until the selection process is complet
-
How to control the input in cell of Jtable must be number?
I want to control the character of cell or column of jtable, it must be number(0-9), only the user type number(0-9) will show on the jtable. how can i do that, can you give me a little example or hints? Thanks very much!
-
BEA Portal 7.0 configure to use ActiveDirectoryAuthenticator
Hi Folk: Could anyone have any ideas how or show me the documentation where I can change the Sample Portal Server to use a different Realm in the Portal Server ? I have read the portal server is by default using Database Realm, which config file and
-
SuggestValues : how to allow not listed value ?
Hello, I have implemented the new suggestion option on an input field(WD 7.11), feeding the values with data's from database... This is working fine, except that the user want to still have possibility to enter free text, for example "A" (generic). B