Unable to determine the sharedness of /dev/sda, /dev/sdb, /dev/sdc on nodes

hello, pls how do i fix this issue, the two scripts ran on first node, but failed on second node, after running cluvfy this is the output:
using cluvfy for storage requirements
Verifying shared storage accessibility
Checking shared storage accessibility...
WARNING:
Unable to determine the sharedness of /dev/sda on nodes:
rac2,rac1
WARNING:
Unable to determine the sharedness of /dev/sdb on nodes:
rac2,rac1
WARNING:
Unable to determine the sharedness of /dev/sdc on nodes:
rac2,rac1
WARNING:
Unable to determine the sharedness of /dev/sdd on nodes:
rac2
Shared storage check failed on nodes "rac2,rac1".
Verification of shared storage accessibility was unsuccessful on all the nodes.
using cluvfy for system requirements
Verifying system requirement
Checking system requirements for 'crs'...
Check: Total memory
Node Name Available Required Comment
rac2 1011.13MB (1035400KB) 1GB (1048576KB) failed
rac1 1011.13MB (1035400KB) 1GB (1048576KB) failed
Result: Total memory check failed.
Check: Free disk space in "/tmp" dir
Node Name Available Required Comment
rac2 1.07GB (1119972KB) 400MB (409600KB) passed
rac1 1.09GB (1141784KB) 400MB (409600KB) passed
Result: Free disk space check passed.
Check: Swap space
Node Name Available Required Comment
rac2 2GB (2096472KB) 1.5GB (1572864KB) passed
rac1 2GB (2096472KB) 1.5GB (1572864KB) passed
Result: Swap space check passed.
Check: System architecture
Node Name Available Required Comment
rac2 i686 i686 passed
rac1 i686 i686 passed
Result: System architecture check passed.
Check: Kernel version
Node Name Available Required Comment
rac2 2.6.18-8.el5 2.6.9 passed
rac1 2.6.18-8.el5 2.6.9 passed
Result: Kernel version check passed.
Check: Package existence for "make-3.81"
Node Name Status Comment
rac2 make-3.81-1.1 passed
rac1 make-3.81-1.1 passed
Result: Package existence check passed for "make-3.81".
Check: Package existence for "binutils-2.17.50.0.6"
Node Name Status Comment
rac2 binutils-2.17.50.0.6-2.el5 passed
rac1 binutils-2.17.50.0.6-2.el5 passed
Result: Package existence check passed for "binutils-2.17.50.0.6".
Check: Package existence for "gcc-4.1.1"
Node Name Status Comment
rac2 gcc-4.1.1-52.el5 passed
rac1 gcc-4.1.1-52.el5 passed
Result: Package existence check passed for "gcc-4.1.1".
Check: Package existence for "libaio-0.3.106"
Node Name Status Comment
rac2 libaio-0.3.106-3.2 passed
rac1 libaio-0.3.106-3.2 passed
Result: Package existence check passed for "libaio-0.3.106".
Check: Package existence for "libaio-devel-0.3.106"
Node Name Status Comment
rac2 libaio-devel-0.3.106-3.2 passed
rac1 libaio-devel-0.3.106-3.2 passed
Result: Package existence check passed for "libaio-devel-0.3.106".
Check: Package existence for "libstdc++-4.1.1"
Node Name Status Comment
rac2 libstdc++-4.1.1-52.el5 passed
rac1 libstdc++-4.1.1-52.el5 passed
Result: Package existence check passed for "libstdc++-4.1.1".
Check: Package existence for "elfutils-libelf-devel-0.125"
Node Name Status Comment
rac2 elfutils-libelf-devel-0.125-3.el5 passed
rac1 elfutils-libelf-devel-0.125-3.el5 passed
Result: Package existence check passed for "elfutils-libelf-devel-0.125".
Check: Package existence for "sysstat-7.0.0"
Node Name Status Comment
rac2 sysstat-7.0.0-3.el5 passed
rac1 sysstat-7.0.0-3.el5 passed
Result: Package existence check passed for "sysstat-7.0.0".
Check: Package existence for "compat-libstdc++-33-3.2.3"
Node Name Status Comment
rac2 missing failed
rac1 missing failed
Result: Package existence check failed for "compat-libstdc++-33-3.2.3".
Check: Package existence for "libgcc-4.1.1"
Node Name Status Comment
rac2 libgcc-4.1.1-52.el5 passed
rac1 libgcc-4.1.1-52.el5 passed
Result: Package existence check passed for "libgcc-4.1.1".
Check: Package existence for "libstdc++-devel-4.1.1"
Node Name Status Comment
rac2 libstdc++-devel-4.1.1-52.el5 passed
rac1 libstdc++-devel-4.1.1-52.el5 passed
Result: Package existence check passed for "libstdc++-devel-4.1.1".
Check: Package existence for "unixODBC-2.2.11"
Node Name Status Comment
rac2 unixODBC-2.2.11-7.1 passed
rac1 unixODBC-2.2.11-7.1 passed
Result: Package existence check passed for "unixODBC-2.2.11".
Check: Package existence for "unixODBC-devel-2.2.11"
Node Name Status Comment
rac2 unixODBC-devel-2.2.11-7.1 passed
rac1 unixODBC-devel-2.2.11-7.1 passed
Result: Package existence check passed for "unixODBC-devel-2.2.11".
Check: Package existence for "glibc-2.5-12"
Node Name Status Comment
rac2 glibc-2.5-12 passed
rac1 glibc-2.5-12 passed
Result: Package existence check passed for "glibc-2.5-12".
Check: Group existence for "dba"
Node Name Status Comment
rac2 exists passed
rac1 exists passed
Result: Group existence check passed for "dba".
Check: Group existence for "oinstall"
Node Name Status Comment
rac2 exists passed
rac1 exists passed
Result: Group existence check passed for "oinstall".
Check: User existence for "nobody"
Node Name Status Comment
rac2 exists passed
rac1 exists passed
Result: User existence check passed for "nobody".
System requirement failed for 'crs'
Verification of system requirement was unsuccessful on all the nodes.
cluvfy check for node connectivity
Verifying node connectivity
Checking node connectivity...
Interface information for node "rac2"
Interface Name IP Address Subnet Subnet Gateway Default Gateway Hardware Address
eth0 192.168.2.102 192.168.2.0 0.0.0.0 192.168.2.1 00:0C:29:4D:18:BA
eth1 192.168.0.102 192.168.0.0 0.0.0.0 192.168.2.1 00:0C:29:4D:18:C4
Interface information for node "rac1"
Interface Name IP Address Subnet Subnet Gateway Default Gateway Hardware Address
eth0 192.168.2.101 192.168.2.0 0.0.0.0 192.168.2.1 00:0C:29:A5:25:87
eth1 192.168.0.101 192.168.0.0 0.0.0.0 192.168.2.1 00:0C:29:A5:25:91
Check: Node connectivity of subnet "192.168.2.0"
Source Destination Connected?
rac2:eth0 rac1:eth0 yes
Result: Node connectivity check passed for subnet "192.168.2.0" with node(s) rac2,rac1.
Check: Node connectivity of subnet "192.168.0.0"
Source Destination Connected?
rac2:eth1 rac1:eth1 yes
Result: Node connectivity check passed for subnet "192.168.0.0" with node(s) rac2,rac1.
Interfaces found on subnet "192.168.2.0" that are likely candidates for a private interconnect:
rac2 eth0:192.168.2.102
rac1 eth0:192.168.2.101
Interfaces found on subnet "192.168.0.0" that are likely candidates for a private interconnect:
rac2 eth1:192.168.0.102
rac1 eth1:192.168.0.101
WARNING:
Could not find a suitable set of interfaces for VIPs.
Result: Node connectivity check passed.
Verification of node connectivity was successful.
Verifying administrative privileges
Checking user equivalence...
Check: User equivalence for user "oracle"
Node Name Comment
rac2 passed
rac1 passed
Result: User equivalence check passed for user "oracle".
Verification of administrative privileges was successful.

Hi,
Refer --- *19. Pre-Installation Tasks for Oracle Clusterware* section from the below link:
http://www.oracle.com/technology/pub/articles/hunter_rac11gr1_iscsi_2.html
See this thread also seems to be same with ur issue:
Clusterware (Unable to determine the sharedness of) in VMware 2.0x server
Regards,
Xaheer

Similar Messages

  • Unable to determine the sharedness of /dev/sde

    Hi Good People,
    I'm having this error when I ran ./runcluvfy.sh and it started when I installed cvuqdisk:
    WARNING:
    Unable to determine the sharedness of /dev/sde on nodes:
          linux2,linux2,linux2,linux2,linux1,linux1,linux1,linux1Can anyone please help. Actually, I've gone through several documentations and dont seems to find the solution.
    Thanks and regards.
    Texas!

    Hi Texas!,
    Did u proceeded the installation of cvuqdisk at OS level?
    Check the Metalink note 372358.1
    and http://download.oracle.com/docs/cd/B19306_01/install.102/b14203/prelinux.htm#sthref307
    Regards,
    Rodrigo Mufalani
    http://mufalani.blogspot.com

  • [SOLVED] ERROR: Unable to determine the file system type of /dev/root:

    :: Running Hook [udev]
    :: Triggering uevents...done
    Root device '804' doesn't exist.
    Creating root device /dev/root with major 8 and minor 4.
    error: /dev/root: No such device or address
    ERROR: Unable to determine the file system type of /dev/root:
    Either it contains no filesystem, an unknown filesystem,
    or more than one valid file system signature was found.
    Try adding
    rootfstype=your_filesystem_type
    to the kernelcommand line.
    You are now being dropped into an emergency shell.
    /bin/sh: can't access tty; job control turned off
    [ramfs /]# [ 1.376738] Refined TSC clocksource calibration: 3013.000 MHz.
    [ 1.376775] Switching to clocksource tsc
    That's what I get when I boot my Arch system. It worked fine for quite a while, but suddenly it ran into an error where the SCSI driver module was corrupt. I fixed it by reinstalling util-linux-ng and kernel26, however, I run into this issue now. http://www.pastie.org/2163181 < Link to /var/log/pacman.log for the month of July, just in case. Yes, I bought a new ATI/AMD Radeon HD 5450 this Saturday, but it seemed to work fine till this broke and it works fine on Ubuntu too, so I suppose we can rule it out.
    Last edited by SgrA (2011-07-05 20:45:36)

    Autodetection failed on your first image, in both your previous kernel installs:
    [2011-07-04 16:14] find: `/sys/devices': No such file or directory
    Which means that sysfs was not mounted. You should be able to boot from the fallback image, which does not use autodetect. Figure out why /sys isn't mounted, as well, and fix that.
    This is also a somewhat crappy bug in mkinitcpio that lets you create an autodetect image that's useless. It'll be fixed in the next version of mkinitcpio that makes it to core.
    Last edited by falconindy (2011-07-04 17:41:19)

  • The directory service is missing mandatory configuration information, and is unable to determine the ownership of floating single-master operation roles.

    We are in the process of removing a child domain from the forest and are down to two DCs. These are both Server 2008r2 sp1 servers, one physical and virtual (PDC). When I try to remove a DC (not the PDC emulator) I get the following error:
    The operation failed because:
    Active Directory Domain Services could not transfer the remaining data in directory partition DC=DomainDnsZones,DC=mydomain,DC=local to
    Active Directory Domain Controller \\V-Svr03.mydomain.local.
    The directory service is missing mandatory configuration information, and is unable to determine the ownership of floating single-master operation roles."
    I have checked replication with repadmin /showrepl and all connections were successful. The dcdiag /test:kccEvent test on all servers passed.
    Most DCdiag tests are successful. The only failure is on NCSecDesc when running dcdiag /test:NCSecDesc
       Testing server: Default-First-Site\DC1-DEV-OFC
          Starting test: NCSecDesc
             Error NT AUTHORITY\ENTERPRISE DOMAIN CONTROLLERS doesn't have
                Replicating Directory Changes In Filtered Set
             access rights for the naming context:
             DC=ForestDnsZones,DC=hookemup,DC=local
             ......................... DC1-DEV-OFC failed test NCSecDesc
    In researching this I find "If you do not plan to add an RODC to the forest, you can disregard this error."
    We have not successfully run ADprep /rodcPrep nor do we plan on having any Read-Only DCs, so I think we can ignor this error. We did try running ADprep /rodcPrep but got an LDAP error which I can duplicate if this is important.
    Schema and Naming FSMOs are on a DC higher in the forest. RID, PDC, and Infrastructure FSMOs for the child domain are on the Virtual server (PDC).
    Any guidance on where to go from here would be greatly appreciated as I have no more hair on my head to pull.

    Ok... I ran repadmin /showreps /v again and it shows no errors
    C:\>repadmin /showreps /v
    Default-First-Site\DC1-DEV-OFC
    DSA Options: IS_GC
    Site Options: (none)
    DSA object GUID: b294c59f-8b46-4133-89c5-0f30bfd49607
    DSA invocationID: 1054285d-cffe-42b4-8074-e2d44adbb151
    ==== INBOUND NEIGHBORS ======================================
    CN=Configuration,DC=mydomain,DC=local
        Default-First-Site\HESTIA via RPC
            DSA object GUID: b464fde9-29d7-4490-9582-fe9270050d50
            Address: b464fde9-29d7-4490-9582-fe9270050d50._msdcs.mydomain.local
            DSA invocationID: afea3845-9fa8-40a6-a477-84348a206348
            SYNC_ON_STARTUP DO_SCHEDULED_SYNCS WRITEABLE
            USNs: 16381490/OU, 16381490/PU
            Last attempt @ 2012-10-29 13:52:39 was successful.
        Default-First-Site\V-SVR03 via RPC
            DSA object GUID: 53018cc4-b8c9-48ce-9a54-1b987e7b08c8
            Address: 53018cc4-b8c9-48ce-9a54-1b987e7b08c8._msdcs.mydomain.local
            DSA invocationID: 45de2c10-ec8b-443d-a645-db4e0a352a23
            SYNC_ON_STARTUP DO_SCHEDULED_SYNCS WRITEABLE
            USNs: 114817/OU, 114817/PU
            Last attempt @ 2012-10-29 13:52:39 was successful.
        Default-First-Site\V-SVR01 via RPC
            DSA object GUID: e2f794eb-9658-4bad-b695-3d8c08f46371
            Address: e2f794eb-9658-4bad-b695-3d8c08f46371._msdcs.mydomain.local
            DSA invocationID: 07bb0fe9-bca9-46d1-92ce-308d36da478d
            SYNC_ON_STARTUP DO_SCHEDULED_SYNCS WRITEABLE
            USNs: 66047/OU, 66047/PU
            Last attempt @ 2012-10-29 13:52:39 was successful.
        Default-First-Site\ATHENA via RPC
            DSA object GUID: cb00a5b0-6dea-473c-bb42-19356dd9ed36
            Address: cb00a5b0-6dea-473c-bb42-19356dd9ed36._msdcs.mydomain.local
            DSA invocationID: 57313a9c-46a2-4b94-87cc-b3f91d54faed
            SYNC_ON_STARTUP DO_SCHEDULED_SYNCS WRITEABLE
            USNs: 8098197/OU, 8098197/PU
            Last attempt @ 2012-10-29 13:52:39 was successful.
    CN=Schema,CN=Configuration,DC=mydomain,DC=local
        Default-First-Site\ATHENA via RPC
            DSA object GUID: cb00a5b0-6dea-473c-bb42-19356dd9ed36
            Address: cb00a5b0-6dea-473c-bb42-19356dd9ed36._msdcs.mydomain.local
            DSA invocationID: 57313a9c-46a2-4b94-87cc-b3f91d54faed
            SYNC_ON_STARTUP DO_SCHEDULED_SYNCS WRITEABLE
            USNs: 8097482/OU, 8097482/PU
            Last attempt @ 2012-10-29 13:52:39 was successful.
        Default-First-Site\V-SVR01 via RPC
            DSA object GUID: e2f794eb-9658-4bad-b695-3d8c08f46371
            Address: e2f794eb-9658-4bad-b695-3d8c08f46371._msdcs.mydomain.local
            DSA invocationID: 07bb0fe9-bca9-46d1-92ce-308d36da478d
            SYNC_ON_STARTUP DO_SCHEDULED_SYNCS WRITEABLE
            USNs: 65239/OU, 65239/PU
            Last attempt @ 2012-10-29 13:52:39 was successful.
        Default-First-Site\V-SVR03 via RPC
            DSA object GUID: 53018cc4-b8c9-48ce-9a54-1b987e7b08c8
            Address: 53018cc4-b8c9-48ce-9a54-1b987e7b08c8._msdcs.mydomain.local
            DSA invocationID: 45de2c10-ec8b-443d-a645-db4e0a352a23
            SYNC_ON_STARTUP DO_SCHEDULED_SYNCS WRITEABLE
            USNs: 114149/OU, 114149/PU
            Last attempt @ 2012-10-29 13:52:39 was successful.
        Default-First-Site\HESTIA via RPC
            DSA object GUID: b464fde9-29d7-4490-9582-fe9270050d50
            Address: b464fde9-29d7-4490-9582-fe9270050d50._msdcs.mydomain.local
            DSA invocationID: afea3845-9fa8-40a6-a477-84348a206348
            SYNC_ON_STARTUP DO_SCHEDULED_SYNCS WRITEABLE
            USNs: 16381373/OU, 16381373/PU
            Last attempt @ 2012-10-29 13:52:39 was successful.
    DC=ForestDnsZones,DC=mydomain,DC=local
        Default-First-Site\V-SVR01 via RPC
            DSA object GUID: e2f794eb-9658-4bad-b695-3d8c08f46371
            Address: e2f794eb-9658-4bad-b695-3d8c08f46371._msdcs.mydomain.local
            DSA invocationID: 07bb0fe9-bca9-46d1-92ce-308d36da478d
            SYNC_ON_STARTUP DO_SCHEDULED_SYNCS WRITEABLE
            USNs: 66295/OU, 66295/PU
            Last attempt @ 2012-10-29 13:57:48 was successful.
        Default-First-Site\ATHENA via RPC
            DSA object GUID: cb00a5b0-6dea-473c-bb42-19356dd9ed36
            Address: cb00a5b0-6dea-473c-bb42-19356dd9ed36._msdcs.mydomain.local
            DSA invocationID: 57313a9c-46a2-4b94-87cc-b3f91d54faed
            SYNC_ON_STARTUP DO_SCHEDULED_SYNCS WRITEABLE
            USNs: 8098367/OU, 8098367/PU
            Last attempt @ 2012-10-29 13:58:13 was successful.
        Default-First-Site\V-SVR03 via RPC
            DSA object GUID: 53018cc4-b8c9-48ce-9a54-1b987e7b08c8
            Address: 53018cc4-b8c9-48ce-9a54-1b987e7b08c8._msdcs.mydomain.local
            DSA invocationID: 45de2c10-ec8b-443d-a645-db4e0a352a23
            SYNC_ON_STARTUP DO_SCHEDULED_SYNCS WRITEABLE
            USNs: 115032/OU, 115032/PU
            Last attempt @ 2012-10-29 13:58:25 was successful.
        Default-First-Site\HESTIA via RPC
            DSA object GUID: b464fde9-29d7-4490-9582-fe9270050d50
            Address: b464fde9-29d7-4490-9582-fe9270050d50._msdcs.mydomain.local
            DSA invocationID: afea3845-9fa8-40a6-a477-84348a206348
            SYNC_ON_STARTUP DO_SCHEDULED_SYNCS WRITEABLE
            USNs: 16381653/OU, 16381653/PU
            Last attempt @ 2012-10-29 13:58:34 was successful.
    DC=mySUBdomain,DC=local
        Default-First-Site\V-SVR03 via RPC
            DSA object GUID: 53018cc4-b8c9-48ce-9a54-1b987e7b08c8
            Address: 53018cc4-b8c9-48ce-9a54-1b987e7b08c8._msdcs.mydomain.local
            DSA invocationID: 45de2c10-ec8b-443d-a645-db4e0a352a23
            SYNC_ON_STARTUP DO_SCHEDULED_SYNCS WRITEABLE
            USNs: 114871/OU, 114871/PU
            Last attempt @ 2012-10-29 13:54:02 was successful.
    DC=DomainDnsZones,DC=mySUBdomain,DC=local
        Default-First-Site\V-SVR03 via RPC
            DSA object GUID: 53018cc4-b8c9-48ce-9a54-1b987e7b08c8
            Address: 53018cc4-b8c9-48ce-9a54-1b987e7b08c8._msdcs.mydomain.local
            DSA invocationID: 45de2c10-ec8b-443d-a645-db4e0a352a23
            SYNC_ON_STARTUP DO_SCHEDULED_SYNCS WRITEABLE
            USNs: 114017/OU, 114017/PU
            Last attempt @ 2012-10-29 13:52:39 was successful.
    DC=mydomain,DC=local
        Default-First-Site\V-SVR03 via RPC
            DSA object GUID: 53018cc4-b8c9-48ce-9a54-1b987e7b08c8
            Address: 53018cc4-b8c9-48ce-9a54-1b987e7b08c8._msdcs.mydomain.local
            DSA invocationID: 45de2c10-ec8b-443d-a645-db4e0a352a23
            SYNC_ON_STARTUP DO_SCHEDULED_SYNCS
            USNs: 114017/OU, 114017/PU
            Last attempt @ 2012-10-29 13:52:39 was successful.
        Default-First-Site\HESTIA via RPC
            DSA object GUID: b464fde9-29d7-4490-9582-fe9270050d50
            Address: b464fde9-29d7-4490-9582-fe9270050d50._msdcs.mydomain.local
            DSA invocationID: afea3845-9fa8-40a6-a477-84348a206348
            SYNC_ON_STARTUP DO_SCHEDULED_SYNCS
            USNs: 16381614/OU, 16381614/PU
            Last attempt @ 2012-10-29 13:56:52 was successful.
        Default-First-Site\V-SVR01 via RPC
            DSA object GUID: e2f794eb-9658-4bad-b695-3d8c08f46371
            Address: e2f794eb-9658-4bad-b695-3d8c08f46371._msdcs.mydomain.local
            DSA invocationID: 07bb0fe9-bca9-46d1-92ce-308d36da478d
            SYNC_ON_STARTUP DO_SCHEDULED_SYNCS
            USNs: 66325/OU, 66325/PU
            Last attempt @ 2012-10-29 13:58:34 was successful.
        Default-First-Site\ATHENA via RPC
            DSA object GUID: cb00a5b0-6dea-473c-bb42-19356dd9ed36
            Address: cb00a5b0-6dea-473c-bb42-19356dd9ed36._msdcs.mydomain.local
            DSA invocationID: 57313a9c-46a2-4b94-87cc-b3f91d54faed
            SYNC_ON_STARTUP DO_SCHEDULED_SYNCS
            USNs: 8098385/OU, 8098385/PU
            Last attempt @ 2012-10-29 13:58:38 was successful.

  • Unable to determine the value of component  ''! Workflow error, please help

    Hi All:
        I am getting the error "Unable to determine the value of component  ''" and workflows are not getting processed. I found OSS notes 879100 related to this issue but I am new to workflow and not sure where to start from! Here is the notes description:
    The workflow WS20500025 ('Service Connection Order Processing') encounters an error directly after being started. The following error messages are displayed in the workflow log:
    SWP102: Error at start of an IF branch
    WL821: Work item 000000100012: Object FLOWITEM method EXECUTE cannot be executed
    SWF_RUN535: Error '9' when calling service 'SO_OBJECT_SEND'
    SWF_RUN534: Problems occurred when generating a mail
    WL863: Notification of completion cannot be generated
    SWF_EXP_001073: Unable to determine the value of component 'QUOTATION'
    SWF_EXP_001072: Error in the evaluation of expression '<???>' for item 1
    SWF_RLS_001101: Operator 'GT': The value of the left operand cannot be determined
    SWP085: Error when starting work item 000000100012
    SWP010: Error when evaluating the IF condition for node 0000000075
    Other terms
    Service connection processing, service connection workflow
    Reason and Prerequisites
    This is due to a program error.
    The checks in the workflow Basis have been made stricter. A query of the type 'Quotation.number > 0' now causes an error if the container element 'Quotation' is not set. This is always the case if the workflow is is running without quotation prcessing, for instance.
    Solution
    The error is corrected in the next Support Package.
    If you want to implement the corrections manually in your system, change the condition in step 000075 of workflow WS20500025 as follows:
        &IS-U: Kundenangebot& EX
    and &IS-U: Kundenangebot.Verkaufsbeleg& > 0
    Save and activate the workflow.
    I am new to workflow and not sure where to start from! Could someone please help me with this? Rewards assured.
    Thanks.
    Mithun

    ANy ideas? Please help me if anyone knows the answer.
    Thanks.
    Mithun

  • Unable to determine the install root path for the LabVIEW Runtime Engine

    Hi,
    i have an issue with using a LabVIEW interop assembly in a .NET application. I get an exception "Unable to determine the install root path for the LabVIEW Runtime Engine" when calling the assembly.
    The little test program is attached below. It's called dotNETHost.exe. If you excecute the programm a dialog with an button appears. Clicking the button shall open another dialog (the LabVIEW Interop component). But the only thing I get is the exception message. The ZIP folder also contains the complete exception meassage (ExceptionMessange.jpg & ExceptionDetails.txt).
    The Interop Assembly was built with LabVIEW 2011. We use Visual Studio 2010 and .NET 4.0.. The dotNETHost.exe.config file is prepared as mentioned in Knowledge base - Loading .NET 4.0 assemblies.
    The Interop assembly contains only one simple dialog (loop is finished by clicking OK) without calling any other VIs or other DLL's.  In case of this there's also no support directory generated by the build process.
    I have no idea why it doesn' work. I hope anyone can help me.
    Thanks in advance
    Kay
    Attachments:
    Debug.zip ‏75 KB

    This may be unrelated, but Labview and .Net4.0 dont work well together. Not yet anyway. I had to compile my assembly in 3.5 to get it to work.
    Please read the following:
    http://zone.ni.com/reference/en-XX/help/371361H-01/lvhowto/configuring_clr_version/
    http://digital.ni.com/public.nsf/allkb/32B0BA28A72AA87D8625782600737DE9
    http://digital.ni.com/public.nsf/allkb/2030D78CFB2F0ADA86257718006362A3?OpenDocument
    Beginner? Try LabVIEW Basics
    Sharing bits of code? Try Snippets or LAVA Code Capture Tool
    Have you tried Quick Drop?, Visit QD Community.

  • BC4J VSM - Unable to determine the value of OC4J_HOME

    I'm on step 8 of the "Configuring the application" section and I'm getting the error "Unable to determine the value of OC4J_HOME" after running bc4j2oc4j.bat.
    Seems that the instruction assume that the OC4J_HOME is already set, so I set a system variable OC4J_HOME to C:\oracle\JDev903.1\j2ee\home. I then re-run bc4j2oc4j.bat and get the same error and now I'm totally lost.
    Also, given that I using W2K and want to get the BC4J-VSM app deployed to 9iAS, not the stand-alone server, should not the OC4J_HOME be set to 9iAS?
    Need some help.
    Thanks,
    Bill G...

    Hi Neelesh,
    I have set the OC4J_HOME as you suggested and then ran the bc4j2oc4j script. I then started JDeveloper, opened the VSM workspace, created db connections, made sure that Struts Commons classpath is pointing to jars in <JDEV_HOME>/jakarta-struts/librebuilt, then Rebuilt VSM-BC4J.jws. Then tried to run the VSM app within JDeveloper and I get the error listed below from the browser as the app tries to load.
    Bill G...
    500 Internal Server Error
    java.lang.NoClassDefFoundError: org/apache/commons/logging/LogFactory
         void org.apache.struts.action.ActionServlet.<clinit>()
              ActionServlet.java:375
         java.lang.Class java.lang.Class.forName0(java.lang.String, boolean, java.lang.ClassLoader)
              native code
         java.lang.Class java.lang.Class.forName(java.lang.String, boolean, java.lang.ClassLoader)
              Class.java:195
         com.evermind[Oracle9iAS (9.0.3.0.0) Containers for J2EE].server.http.ServletInstanceInfo com.evermind[Oracle9iAS (9.0.3.0.0) Containers for J2EE].server.http.HttpApplication.loadServlet(com.evermind[Oracle9iAS (9.0.3.0.0) Containers for J2EE].util.ByteString)
              HttpApplication.java:1890
         com.evermind[Oracle9iAS (9.0.3.0.0) Containers for J2EE].server.http.ServletInstanceInfo com.evermind[Oracle9iAS (9.0.3.0.0) Containers for J2EE].server.http.HttpApplication.findServlet(com.evermind[Oracle9iAS (9.0.3.0.0) Containers for J2EE].util.ByteString)
              HttpApplication.java:4355
         void com.evermind[Oracle9iAS (9.0.3.0.0) Containers for J2EE].server.http.HttpApplication.initPreloadServlets()
              HttpApplication.java:4455
         void com.evermind[Oracle9iAS (9.0.3.0.0) Containers for J2EE].server.http.HttpApplication.initDynamic(com.evermind[Oracle9iAS (9.0.3.0.0) Containers for J2EE].server.http.HttpApplicationConfig)
              HttpApplication.java:662
         void com.evermind[Oracle9iAS (9.0.3.0.0) Containers for J2EE].server.http.HttpApplication.<init>(com.evermind[Oracle9iAS (9.0.3.0.0) Containers for J2EE].server.Application, com.evermind[Oracle9iAS (9.0.3.0.0) Containers for J2EE].server.http.HttpSite, com.evermind[Oracle9iAS (9.0.3.0.0) Containers for J2EE].server.http.HttpApplicationConfig, java.lang.String, java.lang.String, boolean)
              HttpApplication.java:435
         com.evermind[Oracle9iAS (9.0.3.0.0) Containers for J2EE].server.http.HttpApplication com.evermind[Oracle9iAS (9.0.3.0.0) Containers for J2EE].server.Application.getHttpApplication(java.lang.String, java.lang.String, boolean, long, com.evermind[Oracle9iAS (9.0.3.0.0) Containers for J2EE].server.http.HttpSite, boolean)
              Application.java:695
         com.evermind[Oracle9iAS (9.0.3.0.0) Containers for J2EE].server.http.HttpApplication com.evermind[Oracle9iAS (9.0.3.0.0) Containers for J2EE].server.http.HttpServer.getHttpApplication(com.evermind[Oracle9iAS (9.0.3.0.0) Containers for J2EE].server.http.HttpApplicationReference, com.evermind[Oracle9iAS (9.0.3.0.0) Containers for J2EE].server.http.HttpSite)
              HttpServer.java:676
         com.evermind[Oracle9iAS (9.0.3.0.0) Containers for J2EE].server.http.HttpApplication com.evermind[Oracle9iAS (9.0.3.0.0) Containers for J2EE].server.http.HttpSite.getApplication(com.evermind[Oracle9iAS (9.0.3.0.0) Containers for J2EE].util.ByteString)
              HttpSite.java:388
         boolean com.evermind[Oracle9iAS (9.0.3.0.0) Containers for J2EE].server.http.HttpRequestHandler.processRequest(com.evermind[Oracle9iAS (9.0.3.0.0) Containers for J2EE].server.ApplicationServerThread, com.evermind[Oracle9iAS (9.0.3.0.0) Containers for J2EE].server.http.EvermindHttpServletRequest, com.evermind[Oracle9iAS (9.0.3.0.0) Containers for J2EE].server.http.EvermindHttpServletResponse, java.io.InputStream, java.io.OutputStream, boolean)
              HttpRequestHandler.java:407
         void com.evermind[Oracle9iAS (9.0.3.0.0) Containers for J2EE].server.http.HttpRequestHandler.run(java.lang.Thread)
              HttpRequestHandler.java:259
         void com.evermind[Oracle9iAS (9.0.3.0.0) Containers for J2EE].server.http.HttpRequestHandler.run()
              HttpRequestHandler.java:106
         void EDU.oswego.cs.dl.util.concurrent.PooledExecutor$Worker.run()
              PooledExecutor.java:803
         void java.lang.Thread.run()
              Thread.java:484

  • JDeveloper was unable to determine the HTTP port number

    Hi,
    I am trying to deploy my application from Jdeveloper(9.03) to Oracle Application server(9i). Both the servers are running on the same machine.[oc4j is running]
    When I deploy my applicaion (web war), I am getting the following error:
    "http://Anil:????/ManApp
    Note: JDeveloper was unable to determine the HTTP port number of the remote server for the above URL(s)."
    I have specified 8888 port in the connection dialog and it is successfully connecting to the Oracle AS.
    Please help me sort this out.
    Regards
    ~anil.

    JDEV Version: 10.1.2.17.84
    ORACLE AS - 10.1.2.0.0

  • Unable to determine the number of SMSs generated by the message

    In JES5, I tested the SMS logging with two options; standard and xml.
    In both cases, I was unable to determine the number of SMSs generated by the message.
    However, such information can be found in the debug log;
    If i enable the debug logging, the desired information is available:
    10:15:41.59: 2-fragment(2250): The message will be sent as 4 SMS messages
    Nevertheless, Debug logging cannot be enabled all the time since it is pretty verbose.
    It was said that XML based logging released in JES5 will include the number of messages in the mail.log_current.
    But i dont find such information in it.
    Would anyone please tell me if this is applicable?
    what parameters should be changed or modified in order to make such
    information appear in the mail.log file?
    Thanks!

    I've not examined the doc, but I suspect that at least one of the option logging settings will do that for you. Please do have a look at the "channel option files" and the logging levels.

  • ADADMIN Relink Applications programs Unable to determine the release ...

    Hi, Everyone -
    Red Hat Enterprise Linux Server release 5.4 Beta (Tikanga)
    ORACLE RDBMS Version 8.0.6.0.0
    Oracle Reports Version 6.0
    Oracle Applications Release 11
    The Relink Application program process is erroring out ... Please assist
    ===================================================
    OPTIONS:
    Do you wish to proceed with the relink [Yes] ? Yes
    Enter the name of your Oracle Applications environment file below.
    File name [TSTERP2_dallindr187.env] : custom_TSTERP2.env
    Reading product executable information...
    Enter list of products to link ('all' for all products) [all] :
    Generate specific executables for each selected product [No] ?
    AD Administration can relink your Oracle Applications programs with debug
    information. Oracle recommends that you do not relink your programs
    with debug information unless asked to do so by Oracle Support Services.
    Relink with debug information [No] ?
    Relinking selected modules in Application Object Library.
    You are running adrelink, version 115.28
    ==============================================================
    Error:
    /tsterp2/appsvr/tsterp2appl/ad/11.5.0/bin/adrelinknew.sh: line 1409: grep: command not found
    /tsterp2/appsvr/tsterp2appl/ad/11.5.0/bin/adrelinknew.sh: line 1410: grep: command not found
    /tsterp2/appsvr/tsterp2appl/ad/11.5.0/bin/adrelinknew.sh: line 1686: which: command not found
    /tsterp2/appsvr/tsterp2appl/ad/11.5.0/bin/adrelinknew.sh: line 1686: file: command not found
    /tsterp2/appsvr/tsterp2appl/ad/11.5.0/bin/adrelinknew.sh: line 1686: grep: command not found
    /tsterp2/appsvr/tsterp2appl/ad/11.5.0/bin/adrelinknew.sh: line 1920: awk: command not found
    ORACLE RDBMS Version 8.0.6.0.0
    Oracle Reports Version 6.0
    Oracle Applications Release
    Unable to determine the release number.
    Please make sure the file /tsterp2/appsvr/tsterp2appl/custom_TSTERP2.env is correct
    adrelink is exiting with status 1
    End of adrelink session
    Date/time is Fri Apr 16 18:04:19 CDT 2010
    Line-wrapping log file for readability ...
    Done line-wrapping log file.
    Original copy is /tsterp2/appsvr/tsterp2appl/admin/TSTERP2/log/adrelink.lsv
    New copy is /tsterp2/appsvr/tsterp2appl/admin/TSTERP2/log/adrelink.log

    Hi,
    Error:
    /tsterp2/appsvr/tsterp2appl/ad/11.5.0/bin/adrelinknew.sh: line 1409: grep: command not found
    /tsterp2/appsvr/tsterp2appl/ad/11.5.0/bin/adrelinknew.sh: line 1410: grep: command not found
    /tsterp2/appsvr/tsterp2appl/ad/11.5.0/bin/adrelinknew.sh: line 1686: which: command not found
    /tsterp2/appsvr/tsterp2appl/ad/11.5.0/bin/adrelinknew.sh: line 1686: file: command not found
    /tsterp2/appsvr/tsterp2appl/ad/11.5.0/bin/adrelinknew.sh: line 1686: grep: command not found
    /tsterp2/appsvr/tsterp2appl/ad/11.5.0/bin/adrelinknew.sh: line 1920: awk: command not foundDid you source the correct application env file before starting the relinking (APPSORA<CONTEXT_NAME>.env file under $APPL_TOP)?
    As applmgr user, what does the following return?
    $ which gre
    $ which awk
    $ which file
    Do you have the directory where those files are located in the PATH (issue "echo $PATH" to verify)?
    Unable to determine the release number.
    Please make sure the file /tsterp2/appsvr/tsterp2appl/custom_TSTERP2.env is correctDoes this custom env file exist? If yes, are all the entries correct in the file?
    Regards,
    Hussein

  • The status bar is checked in view still unable to determine the size of itunes library.

    The Status Bar in checked in view and I am still unable to determine the size of library in Itunes.  Songs are not numbered.

    pziecina wrote:
    Hi
    The size of your text is set to 100% in your body elements css, this means that for Safari you will get a default font size of 16px, (providing you have not changed the browsers default settings).
    Change the body element font-size to 12px in the css and see what happens.
    PZ
    www.pziecina.com
    I've run out of helpful stars to hand out to all of you nice people. Thank you so much, and as the post quoted here also demonstrates, there are 'overrides' in CSS. It struck me this morning as I have been thinking about this, the very first thing to introduction to CSS is that the meaning of Cascading Style Sheets is that there is an order of priority in command, and the troops closest to the front lines get the final say. I would think that the statement in the document would be the final word, but apparently it's the CSS sheet that takes priority in this case.
    I think my thinking has been in reverse on this rule, not unusual for me, but now I need to re-educate myself thanks to this problem.
    Ken

  • Unable to Determine the Change Date and Time for records in infotype 2011

    Hi Everyone,
    We need to know on when the clock-in and clock-out records were interfaced to SAP in infotype 2011.
    The change date/time field in infotype 2011 is blank/not populated. Hence, we're unable to determine on when the clock-in records were updated in infotype 2011.
    It is not possible to get the audit logs for infotype 2011 as it is switched off.
    We found this table TEVEN and just the same thing, the field "change on" is blank.
    Kindly help us on how we can determine the change date and time for records in infotype 2011.

    Hi Prasad,
    Here's the scenario.
    On June 3, it was reported that staff's clock-in record on june 1, 7:00AM is missing in infotype 2011.
    However, when I checked infotype 2011, the record is there.
    So, they are now asking me on when this record was updated in infotype 2011 as they are thinking that there might be some delays in sending of the data to SAP.
    The created on and created at in table TEVEN shows the same, june 1, 7:00AM which seems to be not true as on june 3, it was reported to be missing.
    Can you help further on this?

  • Unable to determine the Batch Automatically by BAPI

    Hi SAP Experts,
    Greetings to all of you!
    When I am making call to the Goods movement by GOODSMVT_CREATE the batch is not getting assigned automatically. The batch determination for MM is working fine from MIGO screen. Automatic Batch number assignment is also active in the system. As per the BAPI documentation the Batch should have determined automatically.
    Did I miss any other setting in customization.
    Thanks in advance.
    Best Regards,
    UK

    Have a look into OSS note 520813.Question 5
    this blog is as well very good: http://wiki.sdn.sap.com/wiki/display/ERPSCM/StockandBatch+Determination
    And both say you have to do the batch determination before you call BAPI_GOODSMVT_CREATE
    And that is my experience too.

  • Unable to determine the adapter engine or sld connection error

    1. Check wether the SLD is up or not
    2. Note 764176 - Error in XI due to inconsistent SLD contents --> Follow this note.

    Aswin..
    Is that a question or answer or information to others?
    VJ

  • This circuit has no power sources: unable to determine the simulation timestep automatically. Please add a power source or set the simulation timestep under "Interactive Simulation Settings" to proceed.

    Hi again.
    I built this circuit but I keep getting the error message in the title.  I have gone through the older threads on it but can find nothing to help.  If I run the digital smaples they work fine.  If I run other digital circuits I made they work fine.  I have tried this circuit on another PC and get the same error.
    Any help would be greatly appreciated.
    Ray
    Attachments:
    Five input TTL circuit.ms10 ‏81 KB

    Followed the procedure I just told you, and it works fine.........again.  I've attached the fixed version, see if it works there now.
    Signature: Looking for a footprint, component, model? Might be here > http://ni.kittmaster.com
    Attachments:
    Five input TTL circuit_fixed.ms10 ‏82 KB

Maybe you are looking for