The disk copy of "File_Name" was changed since you last opened or saved it.  Do you want to save anyway?

When saving a Photoshop CS6 file I am suddenly getting this message: "The disk copy of “File Name” was changed since you last opened or saved it.  Do you want to save anyway?" I am not connected to a network and I had not downloaded any new software when it started. How do I fix this? and will this cause any file corruption? -Thanks

Chris, thanks. Yes, I realize that something outside of Photoshop is modifying the file but how do I find out what is causing it or how do I stop it? I had not added any new software or upgraded anything when this started and I have never had this problem before. I don't use any font managers. I do have a virus barrier but, as I've said, I have had this software for awhile and can't imagine why all of a sudden it would be interfering with my file. I spoke with Apple to see if the problem might be on their side but they seem to think my Mac is running fine. My biggest concern is will this cause my file to become corrupt? Before closing out yesterday, I created a new document and copied everything from this file over into the new document and renamed it in the hopes that it may help... Maybe something was wrong with that original document. Not sure that will work but will find out today. Also, I haven't worked on any other files since this started. So, I'm not sure yet if this is happening to this file only or if it may happen to future files. -Thanks

Similar Messages

  • Your disk copy of image was changed since last opened or saved (Mac OS)

    I am  occasionally getting a message that "the disk copy of image  was changed since the file was last opened or saved". The OS is 10.6.6 and I am using CS5. It happens on no specific file. All of my files are pretty big. The current one that this is happening on is a psb that is 3.26 G unflattened. I have from  ignorance always ignored the message and saved anyway. I have never detected any damage or discernible changes to the files after ignoring the warning, but after searching Adobe forum and reading a thread about this happening in CS4, I guess I should be more cautious and do a save as and change the file name. I started this thread because no one has reported the issue happening in CS5.
    The files were all given to me by ftp as either psd, tiff or camera raw files.  I work on duplicates of the originals in no other program but photoshop and opened and closed the files a few times before getting the message about the disk copy being changed. All of my files are saved to an internal harddrive and  backed up on a time capsule device. I am on a network, but am the sole user of the network. The files are  worked on and saved to an internal hard drive on the same computer. They are never opened on another computer which is usually turned off. I am running no virus protection software except what ever is native to the OS. The only other applications I am running when getting this message are safari, mail and sometimes bridge.
    Why am I getting this message and what is causing changes (that I can't detect) to the disk copy?

    Really, damn
    I wonder what it can be. I'm 100% sure its nothing running in the background changing the files in my workflow.
    I checked everything and its funny because it is the same on 3 Mac Pro here ???
    So it must be a bug some where in Adobe's files/apps/etc
    Some combination of files, setup or what ever making the error come up.
    I never had it before i upgraded to 10.6.x Before all Mac Pro was running 10.5.8 with PS CS4 and it worked alright.
    Then i upgraded all our Mac's to the latest to get the 64bit feature and PS CS5 and even the newer CS5.5
    And then it started and its also with the newest PS from CS5.5
    First i thought i found the problem because i saw a post at Extensis forum about the Suitcase FM core and Fontsense
    extension for Photoshop and i deleted the extension from photoshop plugin folder and i was happy at first but then again.
    It came back after a wile.. Sucks. Not that.
    I wonder if its really because PS thinks the image was changed. I know it suppose to be that way but in our situation it is
    something else. A bug ofcause and i have been trying to figure this out the last 3 days and even yesterday i used 7 hours
    in a row to find a solution but i never found it.
    I really hope we can find a way other than reinstalling Mac OS X and Photoshop. I do think if we formatted the drive and
    started all over it would help but i don't want to do that because it will take me for ever to set up from scratch, yarggg
    What do you think ? Do you have any idea whats so ever what could course this ? any ideas

  • Your disk copy of image was changed since last opened or saved

    I recently clean installed 10.6.1 on a brand new hard drive together with CS4 including all recent Adobe updates. Apart from Acrobat Reader I have no other Adobe software on this computer.
    When I open and start to work on a file all seems fine and the first time I try to save it's OK, but on the 2nd attempt and there after I get a strange message pop up like the attachment telling me that the file has been changed since it was last opened or saved.
    To try and resolve this problem I have trashed the preferences, verified that fonts are OK with fontagentpro and double checked all my preferences inside Photoshop but nothing there suggests any problems. I also cleaned the fonts cache but this message continues. It has been suggested that the message is being caused by some other application, however it is happening even when Photoshop is the only active application. Does anybody know what could be causing this?
    Thanks
    Ashley

    I believe I have just found the answer to this problem but it all happened quite by accident and I wonder if others may be suffering from issues in CS4 with snow leopard for similar reasons. A couple days ago I tried using the Kodak Gem Airbrush Pro plugin which is occasionally useful, though I hadn't needed it since installing snow leopard. For some strange reason it was refusing to accept my registration code and and was either causing Photoshop to crash badly or else left the watermarks on the image.
    I wrote to Kodak about this who replied earlier today that this was likely to be a permissions issue with the preferences folder in the shared users library, so they suggested I run a command in the terminal to alter those permissions. When navigating there manually, no such folder existed, but after running the command line the folder appeared and the only item inside it was that Kodak preference.
    To cut a long story short, not only has the Kodak plugin started to work properly but all the other strange error messages and frequent crashes also immediately stopped. I've run the same tests now more than a dozen times on different files without a problem.

  • MacBook Pro-'the disk copy of "file name" was changed...'

    My MacBook Pro has been running very slowly. Occasionally, the message 'The disk copy of "file name" was changed since you last opened of saved it. Do you want to save it anyway?" when attempting to save photoshop files. It also tells me my start up drive is nearly full but it is not. I'm guessing the these are related. Anyone else experiencing this?

    I also just started experiencing this. 
    Quick Specs:
    MBP 8GB 2.3Ghz 1.7 (Early 2011)
    256 SSD
    OSX Lion 10.7.2
    I have seen this with Photoshop, Flash, and Dreamweaver CS 5, and Eclipse. 
    I am growing concerned that this is either the SSD starting to fail or possibly the new Spotlight index algorithm. 
    Would really like to see if anyone has a fix.

  • Can you give me a paper or document related to this phone was changed since it was broken down? I need IMEI numbers of two Iphones on the same page. Because I don't wanna save this Iphone again in my country. I paid one time for my old Iphone.

    My Iphone was changed because of broken down thanks to its warranty. I am from Turkey and I paid one time for my old Iphone to save. Can you give me a paper or document related to this phone was changed since it was broken down? I need IMEI numbers of two Iphones on the same page. Because I don't wanna save this Iphone again in my country. I paid one time for my old Iphone. If you give me a document, I don't need to save my Iphone5 and also I don't need to pay again to save in my country.

    this forum is made up of users like you, not apple employees.  We can not help you with that kind of request.

  • I just bought Lion from the app store and I was wondering how long it will be there for because you can't buy a hard copy of it and I was told they were fazing it out so if my computer crashes and I need to install it again will it still be there??

    I just bought Lion from the app store and I was wondering how long it will be there for because you can't buy a hard copy of it and I was told they were fazing it out so if my computer crashes and I need to install it again will it still be there??

    FWIW, your profile shows that you are already on Lion - did you buy Mountain Lion?
    If you purchase an OS from the Mac App Store, it will be listed under your Purchases and will be available to download again if you need it. Note: the license is only for you and is not transferable; if you sell your Mac, you must uninstall it and reinstall the original system.
    If you did buy Lion - out of curiosity - since it is no longer showing in the app store, how did you buy it there? Or did you call Apple and they sent you a redemption code?

  • Help needed. I have a 3TB external hard drive partitioned into 1TB's. I used one partition as backup for the main computer hard drive. But now it is greyed out as shown in the disk utility and its name changed, i dont know how that happened, i tried verif

    Help needed. I have a 3TB external hard drive partitioned into 1TB's. I used one partition as backup for the main computer hard drive. But now it is greyed out as shown in the disk utility and its name changed, i dont know how that happened, i tried verifying and repairing it but had no luck. I also tried mounting and unmounting it but still no solution. Anyone to help please?

    Looks bad. I would strongly advise backing up the stuff on the other two partitions as soon as possible in case the rest of the drive goes wrong.
    Beyond that, Disk Utility has limited abilities to repair disks, DiskWarrior uses a different approach and might, emphasis might be more successful. It has certainly done the job for me in the past when Disk Utility could not.
    See http://www.alsoft.com/diskwarrior/

  • The password for wireless network was changed.  Airport keeps trying to sign in automatically with old password and won't let me put in new password. Any ideas?

    The password for wireless network was changed.  Airport keeps trying to sign in automatically with old password and won't let me put in new password. Any ideas?

    You really should change both the wireless network name and password to avoid potential conflicts with the old and new settings.
    Suggest you give that a try.

  • The language on my phone was changed to japanese. I have switched it back to English, but itunes still has some japanese writing on it

    The language on my phone was changed to japanese. I have switched it back to English, but itunes still has some japanese writing on it.
    Does anyone know how to get rid of this?
    Thanks

    Try This...
    Close All Open Apps...  Sign Out of your Account... Perform a Reset... Try again...
    Reset  ( No Data will be Lost )
    Press and hold the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears. Release the Buttons.
    http://support.apple.com/kb/ht1430

  • How to install the disk copy program

    i recieved a computer from my colleg and want to install disk copy but the files are in a format that needs disk copy to open them (.smi,.part,etc.)how do i install disk copy when the install neds disk copy to run. i do not have the original install disk!!!! so do not ask if i have install disk.

    Would it be correct to assume that you are trying to install the downloadable System 7.5.3 , e.g. the US version here? If so, the computer in question (Performa 638CD?) will have to have a usable operating system on the hard disk; or a startup floppy or CD will be needed.
    As Niel has indicated above, you are not going to need a separate Disk Copy application for a self-mounting image.
    However, please note that the files available for download are protected by a MacBinary (.bin) encoding. StuffIt Expander would be required for the decoding. If the download has been carried out on a PC, leave the encoded files intact until on a Mac. Do not try to decode the .bin on a PC.
    Once on the Mac where you want to install System 7.5.3, decode the .bin (if this has not been done earlier, in an appropriate Mac environment). Then, place the decoded files (one .smi and eighteen .part) in a common folder on the hard disk. Double-click on the .smi; this will mount the total image. The installer will be found in the mounted image. Run the installer.
    Should you in a particular case really need Disk Copy (for instance, for .img files), the program can be found here. You will notice that version 6.3.3 is packaged as a self-mounting image, protected by MacBinary. Decode the .bin on the Mac, double-click on the .smi, and finally drag-copy the Disk Copy program from the image to the hard disk.
    If you do not have access to a suitable StuffIt Expander version for the older Mac, please post back.
    Jan

  • How do I get rid of the Microsoft Setup Assistant loop? I migrated my software/documents from another laptop so don't have the disk to reinstall. Please help! Can't open any Microsoft Office software, like Word, and stuck in a loop?

    I migrated my software/documents from another laptop so don't have the disk to reinstall. Please help! Can't open any Microsoft Office software, like Word (for 2008), and stuck in a loop?
    Whenever I select Word Microsoft Setup Assistant appears, asks for feedback, then after selecting okay (both on saying yes or no to feedback) goes on to a registration page. When I click on this it says I've already registered so I just click okay, and then move on to a update page. After this, if I click on Word, the process repeats itself.
    As I said, I don't have the disk to reinstall, and can't find the Office Settings to delete as many pages have suggested I should try. Safe Boot restarting also hasn't worked... Really stuck and need Word very soon for work.
    If you can help, that would be great, and feel free to ask any questions about the situation as I'm not an expert here.
    Cheers,
    Jack

    First, export your contact from iCloud.com and save them on your computer in a safe spot some where (like you desktop).  Use this to help you do this: http://support.apple.com/kb/PH3606
    Next, on both of your devices, go to Settings > iCloud and turn on contacts and select Merge. Then turn off contacts and select 'Delete form my [device]' when prompted.
    Now go back to iCloud.com and select a contact (yes they will all be messed up again) and select Command+A on a Mac or Control+A on a PC to select all of the contacts.  Tap the delete key on your keyboard (or right click /control click a contact and select delete).
    You iPhone, iPad and iCloud.com should not be empty for contacts.
    Go back to Settings > iCloud on both devices and turn on contacts again (you should not see merge this time).
    Next, go back to iCloud.com and import your contacts (those exported .vcards).  You can either drag and drop them into the empty contacts list in your web browser, or you can use the gear icon to import.
    You cleaned up contacts should import correctly into iCloud.com and sync to both of your devices.
    Good luck.

  • Apple, please fix this bug.  Sending scanned images to "Pictures" is not what I want nor what I was able to do in every previous operation system.   I want to save all scanned items in a specific folder - NOT "PICTURES"  Please fix this bug NOW!

    Apple, please fix this bug.  Sending scanned images to "Pictures" is not what I want nor what I was able to do in every previous operation system.   I want to save all scanned items in a specific folder - NOT "PICTURES"  Please fix this bug NOW!

    I only use Image Capture, so I can't speak for other software.
    Here is how I select a Scan To destination:
    If you are using the minimal details screen, you should have the same submenu to the left of the page size.

  • Currently using Photoshop CS5, but with a replacement computer and upgrade to Yosemite, keep being told I need to install the legacy Java 6. Currently, Photoshop won't even open. I absolutely do not want to subscribe, don't want to mess with the cloud, ju

    Currently using Photoshop CS5, but with a replacement computer and upgrade to Yosemite, keep being told I need to install the legacy Java 6. Currently, Photoshop won't even open. I absolutely do not want to subscribe, don't want to mess with the cloud, just want to buy an upgrade to something that will run for a while longer. I don't care about Lightroom, Bridge, Illustrator, etc.; most of those I've deleted over the years. But I do use Photoshop - or would if it would still run. What options do I have?

    This is the java you need for photoshop cs5 to work on mac os x 10.10 Yosemite
    https://support.apple.com/kb/DL1572?locale=en_US
    It's also possible you may have to reinstall photoshop cs5 even after installing the above java, because sometimes the upgrade to mac os x 10.10 messes up the photoshop cs5 installation.
    You can download photoshop cs5 from here if you don't already have the install media.
    https://helpx.adobe.com/creative-suite/kb/cs5-product-downloads.html

  • My Adobe CS will no longer launch I get an error message that says- "my computer has changed since I last used Photoshop. I need to re-register but Adobe doesn't support the older version. I was instructed to uninstall and re-install it but when I go to t

    HELP

    I responded in your other thread. To reply to a post click the Reply button at its lower right to open up a place where you can type:

  • HT1311 Can I find out who changed a password on my account? It was for the game center. It was changed from out of state and would like to find the source to prove it.

    I need to know if I can pin point the source of what device was used to change a password on my account?

    I was notified by Itunes a request for a password change was requested and they granted the change. An X used my email address is how I found out. I changed my password again. Shame on Itunes for allowing anyone to do that. I want to know if I can find the devise or phone that requested a new password.

Maybe you are looking for

  • Error in starting form server on Redhat 7.1

    Hi, i have installed oracle9iAS 1.0.2.0.0 on redhat 7.1 successfully with out any error but when I start forms server it gives error like: failed to exec runform f60webm [error:2] WHen I look in make.log file it shows errorr like gcc: /usr/xllR6/lib/

  • Itunes will not allow me to transfer music to my iphone, how do I fix this?

    Got a new computer, authorized it with my account, downloaded music (from a 3rd party website not itunes), but it will not allow me to transfer music to my iphone. What else do I need to do? Help!

  • Making a movie in 100% mode....

    I need some help please, I want to have my movie at 100% so it sizes to the viewers screen. However, I dont want it to go any bigger than the actually movie size itself. My images start to pixelate. How can I avoid this without making my images bigge

  • Change e-mail body in mail adapter using module.

    Hi All, I am woking with one mail adapter and I prepared one code to change the attachement name and body content. The attachement is working good but the body e-mail is not working. After to check a lot of blog my code now is creating two attachemen

  • IN UPDATE TASK NOT WORKING

    Hi , I have used IN UPDATE TASK with a function module. Also used COMMIT WORK after the FM. Even then it is not working. If I comment the IN UPDATE TASK it is working. Any clues please ? Thank you, Surya.