The entity with header id(2) generated the following errors
Hi all,
While Implementing in Maintenance Workbench am receiving this error message" The entity with header id(2) generated the following errors".
Although after the error, half of the work orders have been implemented. that means if there are 12 scheduled works in that 6 have been implemented. Please explain dis. We r using R12.0.6
Hi,
Can you find any details about the error in the log files?
Regards,
Hussein
Similar Messages
-
When I attmpt to synch my Iphone I get the following error message. "Itunes was unable to load data class informationfrom synch services. Reconnect or try again later. This started after I uddated to the latest version of Itunes. What should I do?
My iPods are working fine...this is just on our iPhone 3GSs....friend said his iPhone 4 was working fine with upgrade.
Tried: the winsock reset, uninstall/re-install of iTunes, shut the firewall down. Even called Apple...and after 2 hours of being told that "I'm savvy and have done everything they'd recommend" still with no fix...
Still: Takes over 2 minutes (not hooked up to phone) to open Edit-Preferences-Device...and can't find any backups?!?! Takes over 2 minutes to even open the phone to change spps, musice, books, etc....but won't let me do anything with contacts...wonder if this is what that error message is about (because I don't actually sync to an email program, I've just kept it all on the phone - mistake).
**banging head on table** -
I'm having trouble downloading an upgrade for Photoshop Elements 12 and was having a Chat with Abishek who gave me a link. When I clicked on the link I got the following error message:
413
Header Length too LargeThat's an error message typically seen when using the Chrome browser.
Clear your cache and cookies in Chrome then try again.
Or, as Ned says, use a different browser. -
I keep getting the following error message when I try to update my itunes, "There is a problem with this windows installer package. Aprogram run as part of the set up did not finish as expected. Contact your support personnel or package vendor."
Yes, I had found a similar solution also. I'm running XP Pro, SP3. I went Control Panels/ Add-Remove programmes/apple software update/ change/ repair. Then run the 10.5 exe.
While the programme updated from version 8 of iTunes, my new iTunes is now a mess. Not all of my music was in the same folder previously but it all showed up on iTunes. Now many albums have been left out, some have only a few tracks and some have two copies of some tracks as well as having other tracks missing. I haven't begun to work on that. -
Hi everyone,
My logic in prepareForDML() updates some attributes (shown in the snippet below) based on whether an insert or update is taking place. But, when I delete a line, I get the following error: JBO-27101: Attempt to access dead entity in EO. So far, I have not been able to catch this error.
if (operation == DML_INSERT) {
setLineId((new SequenceImpl("eo_s",
getDBTransaction()).getSequenceNumber()));
setCreatedBy(createdBy);
setCreationDate(currentDateAndTime);
setLastUpdatedBy(lastUpdatedBy);
setLastUpdateDate(currentDateAndTime);
} else if (operation == DML_UPDATE) {
setLastUpdatedBy(lastUpdatedBy);
setLastUpdateDate(currentDateAndTime);
Any advice would be appreciated. Thanks!
JamesHi Timo,
Thanks for responding. Whenever I delete a line and commit, I get the error. And, since inserts and updates are all that I am interested in, I did not think that I needed deletion logic. The VO contains several EOs, but all are reference EOs that cannot be updated except for the main EO.
Here is the entire prepareForDML() method:
protected void prepareForDML(int operation, TransactionEvent e) {
// BEGIN Initial Version
// Using prepareForDML is a best practice (versus doDML).
ApplicationModule am;
boolean lineIsValid;
byte entityState;
byte postState;
Date currentDateAndTime;
Date weekEndingDate;
Number createdBy;
Number lastUpdatedBy;
String amConfiguration;
String amDefinition;
String entityStateText;
String operationText;
String postStateText;
ServicesAMImpl servicesAMImpl;
Timestamp timeStamp;
// amDefinition = "com.model.services.ServicesAM";
// amConfiguration = "ServicesAMLocal";
// am = Configuration.createRootApplicationModule(amDefinition, amConfiguration);
createdBy = new Number(-1); // TODO fnd_profile.value('USERNAME')
entityState = getEntityState();
entityStateText = null;
operationText = null;
postState = getPostState();
postStateText = null;
lastUpdatedBy =
new Number(-1); // TODO fnd_profile.value('USERNAME'); is there a last login id?
// servicesAMImpl = (ServicesAMImpl)am;
// lineIsValid = servicesAMImpl.callValidateLineProcedure(getBillable());
timeStamp = new Timestamp(System.currentTimeMillis());
currentDateAndTime = new Date(timeStamp);
// TODO Should weekEndingDate be in the callValidateLineProcedure()?
weekEndingDate =
commonCode.nextDay(getActivityDate(), Calendar.THURSDAY);
setWeekEndingDate(weekEndingDate);
// TODO See https://community.oracle.com/message/9542286?tstart=14.
// if (entityState != Entity.STATUS_DELETED & entityState != Entity.STATUS_DEAD)...
System.err.println("prepareForDML - getLineId: " + getLineId());
switch (operation) {
case DML_DELETE:
operationText = "Delete";
break;
case DML_INSERT:
operationText = "Insert";
break;
case DML_UPDATE:
operationText = "Update";
break;
System.err.println("prepareForDML - operationText: " +
operationText); // TODO
// System.out.println("prepareForDML - operationText: " + operationText); // TODO
switch (entityState) {
case Entity.STATUS_INITIALIZED:
entityStateText = "Initialized";
break;
// Don't do anything.
case Entity.STATUS_UNMODIFIED:
entityStateText = "Un-Modified";
break;
// Don't do anything.
case Entity.STATUS_DEAD:
entityStateText = "Dead";
break;
// Don't do anything.
case Entity.STATUS_DELETED:
entityStateText = "Deleted";
break;
// entity.revert();
// entity.refresh(Entity.REFRESH_CONTAINEES);
case Entity.STATUS_MODIFIED:
entityStateText = "Modified";
break;
// entity.refresh(Entity.REFRESH_UNDO_CHANGES);
case Entity.STATUS_NEW:
entityStateText = "New";
break;
// entity.refresh(Entity.REFRESH_FORGET_NEW_ROWS);
// entity.refresh(Entity.REFRESH_REMOVE_NEW_ROWS);
default:
entityStateText = String.valueOf(entityState);
System.err.println("prepareForDML - entityStateText: " +
entityStateText);
switch (postState) {
case Entity.STATUS_INITIALIZED:
postStateText = "Initialized";
break;
// Don't do anything.
case Entity.STATUS_UNMODIFIED:
postStateText = "Un-Modified";
break;
// Don't do anything.
case Entity.STATUS_DEAD:
postStateText = "Dead";
break;
// Don't do anything.
case Entity.STATUS_DELETED:
postStateText = "Deleted";
break;
// entity.revert();
// entity.refresh(Entity.REFRESH_CONTAINEES);
case Entity.STATUS_MODIFIED:
postStateText = "Modified";
break;
// entity.refresh(Entity.REFRESH_UNDO_CHANGES);
case Entity.STATUS_NEW:
postStateText = "New";
break;
// entity.refresh(Entity.REFRESH_FORGET_NEW_ROWS);
// entity.refresh(Entity.REFRESH_REMOVE_NEW_ROWS);
default:
postStateText = String.valueOf(postState);
System.err.println("prepareForDML - postStateText: " + postStateText);
// DeadEntityAccessException
if (operation == DML_INSERT) {
setLineId((new SequenceImpl("eo_s",
getDBTransaction()).getSequenceNumber()));
setCreatedBy(createdBy);
setCreationDate(currentDateAndTime);
setLastUpdatedBy(lastUpdatedBy);
setLastUpdateDate(currentDateAndTime);
} else if (operation == DML_UPDATE) {
setLastUpdatedBy(lastUpdatedBy);
setLastUpdateDate(currentDateAndTime);
// Configuration.releaseRootApplicationModule(am, true);
// END Initial Version
super.prepareForDML(operation, e);
Here is the entire doDML() method:
protected void doDML(int operation, TransactionEvent e) {
// BEGIN Initial Version
// This logic is for troubleshooting only.
String operationText;
operationText = null;
switch (operation) {
case DML_DELETE:
operationText = "Delete";
break;
case DML_INSERT:
operationText = "Insert";
break;
case DML_UPDATE:
operationText = "Update";
break;
System.err.println("doDML - operationText: " + operationText); // TODO
// System.out.println("doDML - operationText: " + operationText); // TODO
// END Initial Version
super.doDML(operation, e);
James -
While making a backup copy in Itunes of my Iphone I receive the following error message: While making a backup copy of this iPhone (-35) an error has occurred. Do you want to continue with altering this Iphone? When you continue al the material on this Iphone will be lost.
I reinstalled iTunes but that dit not help. After synching iTunes with my iPhone it also asks to authorize my pc and when i Click on ok, it says it is already authorized.
Please can somebody help me, so I can make backup.
Greetz,
DerkIt's likely that your backup is corrupt. Try deleting the backup, then right click on the name of the phone in iTunes and choose "back up". To delete go to iTunes Preferences, Devices tab. Highlight and delete the most recent backup. Note that sometimes deleting this way leaves some garbage around that can still interfere with a new backup, so you should verify that the backup folder is empty.
from: http://support.apple.com/kb/HT4946
The folder where your backup data are stored varies depending on the computer's operating system. Make sure the backup folder is included in your periodic data-backup routine.
iTunes places the backup files in the following places:
Mac: ~/Library/Application Support/MobileSync/Backup/
Windows XP: \Documents and Settings\(username)\Application Data\Apple Computer\MobileSync\Backup\
Note: To quickly access the Application Data folder, click Start, and choose Run. Type %appdata% and click OK.
Windows Vista and Windows 7: \Users\(username)\AppData\Roaming\Apple Computer\MobileSync\Backup\
Note: To quickly access the AppData folder, click Start. In the search bar, type %appdata% and press the Return key. -
Just recently I am getting the following error message when trying to access web sites. I am using Firefox browser version 10.0.2. I get a pop up window stating "Exc in ev handl: TypeError: c.location is null" as the web site page is being displayed in browser winder. Then I have to click ok. It doesn't matter what web link/site I go to it happens. It is an issue with some plug-in?
I have advised McAfee's product team of the problem and this thread, and they're looking into it now.
-
Using Firefox 4 & Windows 7. Everytime I start Firefox from a shortcut to a website it comes up with the following error 'there was a problem sending the command to the program'. The requested website does load after this. with no problems.
If a shortcut is used while Firefox is already open the error does not occur.As reported in earlier replies, the annoyance disappeared after I upgraded to Roboform 7.5.6, from 7.5.4.
Regards, Steve -
while installing adobe creative cloud , getting the following error msg " There seems to be a problem with the download process. Error code:201"
Creative Cloud Help / Error downloading Creative Cloud applications
http://helpx.adobe.com/creative-cloud/kb/error-downloading-cc-apps.html -
Since updating OS to Mountain Lion from leopard, I get the following error message when trying to backup with time machine on external drive. "Could not complete backup to media share. The network backup disk does not support the required AFP features." What are AFP features and how do I get Time Machine to backup to my current external backup?
This means that your NAS does not support the required encryption. Update your NAS to the latest firmware or ditch it and buy a Time Capsule (they are the most reliable when using TM).
-
Has anybody had the following error while trying to download iTunes 10.5? There is a problem with Windows Installer package. A program required for this install to complete could not be run.
Go to "control panel" then "add or remove programs". Highlight "Apple software update" Choose "change" click "Repair" This should do the trick. Then download and install iTunes 10.5 again.
-
When I am trying to update my iPad 2 via syncing it with my PC, I get the following error message: "iPad software update server could not be contacted." Any ideas?
Try rebooting your router and or cable modem. Unplug it/them for about 30 seconds and then plug back in. See if it works then. Reboot your iPad as well.
Reboot the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider if it appears on the screen - let go of the buttons. Let the iPad start up. -
Starting in 2015 I get the following error when I try to import my photos. "The following files were not imported because they could not be read" -DSC8416.NEF I've been importing the same type of photos with no errors then 2015 came along and now I can no longer import.
The error message is misleading, the problem is that you need WRITE privileges added to the destination directory tree.
Assuming you are using the "date" structure that LR defaults to, find the directory that contains the 2014 folder (the one that works) and add WRITE rights to the parent of "2014".
While you are there, if you want, add "2015" folder to beside "2014" and add READ and WRITE rights to that new directory. -
Hi all,
I am having a list of files in a folder named datafiles and I am processing them one by one when I finish each one I want to move the file into a folder archive.
I am having a variable named filename and archivefilename and two fileconnections one is originalfiles and archivefiles
archivefilename=replace( @[User::filename],"datafiles","archive")
orginalfiles connection is an expression =@user:filename
archivefies connection is an expression=@user:archivefilename
the filename comes from reading the folder that contains those files
public void Main()
string[] filenames;
filenames = Directory.GetFiles(@"C:\luminis\datafiles\");
Array.Sort(filenames);
Dts.Variables["filelist"].Value = filenames;
Dts.TaskResult = (int)ScriptResults.Success;
The folder c:\luminis\archive\ exists
why I am getting this error
My filesystem task : destinationpathvariable =false
destinationconnection:archivefile
overwrite=true
operation=movefile
issourcepathvariable=false
sourceconnection=original file
why am i getting this error[File System Task] Error: An error occurred with the following error message: "Could not find a part of the path.".
sohairzakithere may be 2 problem...
1> specify a target directory only, not with the file name.
OR
2> Try using the unc,path format \\computername\sharename\
let us know your observation...
Let us TRY this | Mail me
My Blog :: http://quest4gen.blogspot.com/ -
I updated my Itunes to the latest version(11.1.4) and it isn't running on my laptop. The current OS is a W7 ultimate 64bits, when i try to run it, opens a message box with the following error message: error 7 (windows error 1114) . What should I do?
Try the following user tip:
Troubleshooting issues with iTunes for Windows updates
Maybe you are looking for
-
How to access a Portal User Info from a J2EE application?
Hi, I have deployed a j2ee application in portal and its running fine. from that application i need to assign some roles to some users.i have the user id. so my doubt is can i access the portal user info from this j2ee application?i have some servlet
-
before in Windows XP an window opened: "import camera assistent" (I don't know it exactely in english because I use the german version) every time I matched my iPhone with the PC and new photos or films are on it. But after the last softeware update
-
I'm trying to copy and paste a graph into InDesign and when I do it won't paste the legend. What am I doing wrong?
-
ITunes app crashes when I try to use video controls
Hi, I have downloaded a couple of movies from iTunes to my iPhone 3GS. I can play the movies OK, and fast-forward & rewind, but if I try to use pause or the timeline scrub bar, then iTunes just exits. If I go back in, the movie is always back at the
-
Deleting Capture scratch and Render files
When and how should one go about deleting capture scratch files and render files? seems alot of folks say to transfer them to disc.... do you have to save them? i mean if you save the time line project (to re-edit later) and save a dvd proj, and a di