The field value is't shown enough in the KNVV

Hi,gurus,
I Input a long character sting in the custer master data (customer name) , but it can be shown long enough in relevant field of KNVV,some character in the last is missing. can somebody tell me the reason so that I can show all?
Thanks advance.

You can use 35 characters only. LAst 5 characters (out of 40) will not be shown.
The use of the last 5 characters in field NAME1 is restricted (40 of 40)

Similar Messages

How to validate the incoming field value and raise an alert message

Dear all,
I have the following structure
If incoming value for the field externalid is empty then i have to raise a alert message to end user "externalid field is empty for the id : id number" and for all incoming values it should work. I used the following udf on field externalid with two arguments
if(externalid.equals(""))
throw new RuntimeException("externalid field empty for the following id : " +id);
else
return externalid;
This is working fine for single record. But for many records(multiple occurences), this logic is not working as if records 2 and 3 fails it is showing exception externalid field is empty for the id : record 2.
how to achieve the tranformation logic ?
Regards
Koti Reddy

Hi Amit,
I have tried the above udf, but still stuck-up.
For the above structure shown in image, i have tested giving the following payload
<?xml version="1.0" encoding="UTF-8"?>
<ns0:upsertRequest xmlns:ns0="http://sap.com/xi/SFIHCM01">
 <sessionId/>
 <upsert>
 <type/>
 <sfobject>
 <id>1</id>
 <businessKeys>1</businessKeys>
 <type>1</type>
 <status>1</status>
 <externalId>1</externalId>
 <username>1</username>
 <firstName>1</firstName>
 <lastName>1</lastName>
 <mi>1</mi>
 <gender>1</gender>
 <email>1</email>
 <managerExternalId>1</managerExternalId>
 <hrExternalId>1</hrExternalId>
 <department/>
 <jobCode/>
 <division/>
 <location/>
 <timeZone>1</timeZone>
 <hireDate/>
 <empId/>
 <title/>
 <businessPhone/>
 <fax/>
 <addressLine1/>
 <addressLine2/>
 <city/>
 <state/>
 <country/>
 <zipCode/>
 <reviewFreq/>
 <lastReviewDate/>
 <matrixManagerExternalIds/>
 <defaultLocale/>
 <customManagerExternalIds/>
 <secondManagerExternalId/>
 <loginMethod/>
 <proxy/>
 </sfobject>
 <sfobject>
 <id>2</id>
 <businessKeys>2</businessKeys>
 <type>2</type>
 <status>2</status>
 <externalId>2</externalId>
 <username>2</username>
 <firstName>2</firstName>
 <lastName>2</lastName>
 <mi>2</mi>
 <gender>2</gender>
 <email>2</email>
 <managerExternalId>2</managerExternalId>
 <hrExternalId/>
 <department/>
 <jobCode/>
 <division/>
 <location/>
 <timeZone/>
 <hireDate/>
 <empId/>
 <title/>
 <businessPhone/>
 <fax/>
 <addressLine1/>
 <addressLine2/>
 <city/>
 <state/>
 <country/>
 <zipCode/>
 <reviewFreq/>
 <lastReviewDate/>
 <matrixManagerExternalIds/>
 <defaultLocale/>
 <customManagerExternalIds/>
 <secondManagerExternalId/>
 <loginMethod/>
 <proxy/>
 </sfobject>
 <processingParam>
 <name/>
 <value/>
 </processingParam>
 </upsert>
</ns0:upsertRequest>
No node is creating for success records, instead it throws exception that "externalid field is missing for the id": id for empty externalid field value in second record.
But my requirement is..... when i process 50 records, records with missing value for field externalid should raise an alert message to end user intimating him to check the externalid field for particular id. If the value for externalid field is present in incoming record/payload, then it should be passed to target system.
How can i implement this logic ?
Regards
Koti Reddy

How can I add form field value to the file name in save as dialog box

I do not want the form to be saved automatically, just want the form to auto populate the "file name" only.
A little background on the forms I want to use: My company has 70 retail outlets, I'll use one of our pdf forms called an "Incident Report" as an example. I would like for a store manager to be able to complete the form, then email the form to the main office (I already have javascript to add field values and form name to the email subject line), once the main office receives it, I want for them to be able to file the pdf electronically on our server. We have mutliple forms that we use so I do not want any of the forms to automatically save anywhere, (at this time anyway) I just want the office personnel to be able to click "save as" (or whatever they will need to click) and the form automatically add certain field values from the pdf they have received, of which will be different each time the form is sent to the office (Date, store #, employee name etc.) in addition to the name of the form in the "File name" of the "Save As" dialog box. The main office employees will decide into which server file the pdf should be saved.
I'm using Acrobat 8 professional, the stores and office personnel use Adobe reader.
One little note: We currently print and file a lot of paper on a daily bases, as soon as I can get this to work, we are going green.
Me and a lot of trees in this will really apprecitate any help you can give with this! :-)

You might want to take a look at the document "Developing Acrobat Applications Using JavaScript" (js_developer_guide.pdf) which is part of the Adobe Acrobat SDK, which can be downloaded here. Read the "Privileged versus non-privileged context" (p. 45ff.). You will find an example for "Executing privileged methods in a non-privileged context". Should be almost exactly what you are looking for.
Small Outline: For security reasons ("the user always has to know what's going on") you are not allowed to use the "Doc.saveAs"-method without the user permission (--> in a non-privileged context). In order to reach the goal of a privileged context you can use a trusted function. You do this by creating a JavaScript file (*.js) in either the Application-JavaScript-Folder (default location on Windows systems: "%ProgramFiles%\Adobe\Acrobat 10.0\Acrobat\Javascripts") or the User-JavaScript-Folder (default location on Windows systems: "%AppData%\Adobe\Acrobat\10.0\JavaScripts"). Add the following content to the new file:
myTrustedBrowseForDoc = app.trustedFunction( function ( oArgs ) {
     app.beginPriv();
          var myTrustedRetn = app.browseForDoc( oArgs );
     app.endPriv();
     return myTrustedRetn;
myTrustedSaveAs = app.trustedFunction( function ( doc, oArgs ) {
     app.beginPriv();
          var myTrustedRetn = doc.saveAs( oArgs );
     app.endPriv();
     return myTrustedRetn;
The developer guide actually wants you to add this content to the existing "config.js" file. I recommend creating a new file, since its easier to deploy in a network. Either way, every client/user who needs to be able to save documents this way, needs this JavaScript Code in his Application/User-JavaScript-Folder.
Within the Acrobat Document, which you want to obtain a certain file name, you can now use the trusted functions "myTrustedBrowseForDoc" and "myTrustedSaveAs" to store the file. To call the trusted functions and deliver the file name you can either you use a form field (button) or you add a new menu item. Add the following JavaScript Action to the button/menu item and change "Roller Coaster" to the name of the field which contains the value which you want to become the new file name:
var fileName = this.getField("Roller Coaster").valueAsString;
try {
     var oRetn = myTrustedBrowseForDoc({bSave: true, cFilenameInit: fileName + ".pdf"});
     try {
          myTrustedSaveAs(this, { cPath: oRetn.cPath, cFS:oRetn.cFS });
     catch(e) {
          console.println("Save not allowed, perhaps readonly.");
catch(e) {
console.println("User cancelled Save As dialog box");
Good Luck!

How to transfer the field values in MA form RFX

Hi
We have two fields ( extended field of date type ) in Rfx page . Now client wants that this two field value will be transferred to Master Agreement page while creating MA form Rfx award .
Is there any possible way to do this ?
Regards
Sudipta
Edited by: Sudipta62 on Dec 20, 2011 10:38 AM

Sudipta, Vikram,
If names are the same, are the fields transferred automatically? Or do we still write code?
Thanks,
MP

Who has changed the Custom Field value?

Dears,
Need to know the information regarding how to fetch that who has changed the Custom field value from PWA/MPP.
Example:
There is a PDP (say ProjectInfo):
There is a Custom Field added to that PDP (say Project Status = In Progress).
Now for ProjectA, someone has checked out and changed the Custom Field "Project Status" from "In Progress" to "Closed".
I need to fetch the information regarding who has changed that Custom field.
In which direction should I move: Event Handlers, PSI???? Any other stuff?
Thanks & Regards,
Shravan

Hi Shravan,
I'm not a developer but I do know that you can use an event handler pushing the resource name and date in custom fields.
Another way is to use a 3rd-party tool like
FluentPro Audit Tool.
Hope this helps,
Guillaume Rouyre, MBA, MVP, P-Seller |

Restrict filter values that are shown in the selection screen

Hi Experts
1) Is it possible to restrict the filter values that are shown in the selection screen in BEx web? When a user are asked to enter a material number and uses the selection button in BEx web, he should only see material numbers for one specific plant. How is this done?
2) Is it possible to remove the selection button for å characteristic filter in the selection screen in BEx web? The selection button I am talking about is the button to the right of where you enter the filter value (two white papers on top of each other). If there is no solution for question 1 we have to go for question 2 solution.
We are using BI 04s, SP 09.
Kind regards
Erik

Hi Erik,
It seems that you would like the user to see value for 1 single plant. If the Plant Value is fixed then you can use this value in the Query and hardcode it.> in the query go to the Plant Chrac and keep a constant value of the Plant.
How ever if you need this value to be dynamic then use a variable for customer exit and populate this value using ABAP.
Regards,
Jasprit

How to Track the changes made to the custom table field value

I want to track the changes made to the custom table field value in table maintenance generator.please help me it is very urgent
Thanks & Regards,
Kranti

Hi Satya,
These are the steps you've to do.
1. Enable the change document flag in the data element level for the fields of the tables you want to monitor.
2. Go to transaction SCDO. Create a new change object, and add your table to this object. After generation, you'll get a function module.
3. Call this function module in the table maintainence generator screen, after the data is saved to the database table. This function module automaticallly writes the changes, with the old and new values, and the fields that were changed to the tables CDHDR and CDPOS.
4. You can keep track of the changes made to the table by monitoring these tables.
Regards
Anil Madhavan

Subtotal in alv report based on the particular field value

Hi,
As per my requirement, i need to do subtotal of quntity field based on the material number field value in alv report.
Ex: if material number falls 1 to 10 then i need to be calculate and display subtotal qty amount with text " total of the mat1" and if material number falls 11 to 20 then again i need to be claculate and display subtotal qty amount with text "total of the mat2". similarily i need to display the details.
<removed_by_moderator>
Regards
Nagendra

Hi,
Ex: if material number falls 1 to 10 then i need to be calculate and display subtotal qty amount with text " total of the mat1" and if material number falls 11 to 20 then again i need to be claculate and display subtotal qty amount with text "total of the mat2". similarily i need to display the details.
What you can do is in your output table, you will have to create an auxilary field, lets call it as material group (groupid). Now you can do a subtotal on the material group. However the logic to determine what materials belong to which group should be coded. I guess you might be having some logic for that.
So lets say that material 1 to 10 as G1 ( group 1 ) and material 11 to 20 as G2 ( group 2 )
The output of the internal table would be
Groupid matnr ...
1 1
1 2
1 3.....and so on
2 11
2 12
2 13....upto 20.
Now in the fieldcatalog assign an 'X' to the 'dosum' parameter to the field Groupid
In the sort info do the following :
gs_sort-fieldname = 'GROUPID'.
gs_sort-spos = 1.
gs_sort-up = 'X'.
gs_sort-subtot = 'X'. ***CRUCIAL STATEMENT****
append gs_sort to gt_sort.
Now pass all this data to the alv grid function. And you are done.
regards,
Advait

How we can Print a field Value in last line of the layout

Hello:
I am doing Check printing report ... Accroding to that I am facing a problem to print a Field value in last line of the layout....Anyone Can help to this please.....

Hello,
Take a look to the example provided in the note :
Note.253881.1 How to Create a Report With a Frame Only on the Last Page at a Fixed Position
Regards

Report query not returning the field value from external table

hi
I have an issue regarding reports. I have a query having 4 fields from external table and remaining from db tables. the report query returns all the fields from the db tables and only 2 fields from external table. but the same query if I tried in plsql developer it returns all the fields values.
Can anyone please help me in this issue.
Thanks and Regards
kk

Duplicate post?
value not displaying in report whereas it returns in plsql developer
value not displaying in report whereas it returns in plsql developer
Please log a SR if you do not get any reply to your thread instead of creating new one.
Thanks,
Hussein

How can we make one view field value to be copied to other field of the the

Hi
 I am new in CRM2007 I have enhanced sap component & enhanced SAP View but I wanted the field value of the enhanced view to be mapped to the field value of the same view which is added from EEWB
Pls tell me if the added new field can be made as Dropdown list box without fixed values & Design Layer customizing I mean to say through coding can we made the input field as Dropdown
Appreciate any help in advance
Thanks
Neel

Hi,
You can write your own ligic in GET_V_<FIELD> method. Select the values which needs to be displayed in the drop down list based on your own condition. Some sample code is given below:
METHOD get_v_zzverksomr.
DATA: lt_ddlb TYPE bsp_wd_dropdown_table,
 ls_ddlb TYPE bsp_wd_dropdown_line,
 lv_display_only TYPE string,
 gr_ddlb_verksomr type ref to CL_CRM_UIU_DDLB,
 ls_verksomr_values TYPE LINE OF vrm_values.
 SELECT verksomr verksomrtxt FROM zkb_verks
 INTO TABLE lt_ddlb.
 IF sy-subrc EQ 0.
 INSERT INITIAL LINE INTO lt_ddlb INDEX 1.
 ENDIF.
IF gr_ddlb_verksomr IS NOT BOUND.
 FREE gr_ddlb_verksomr.
 CREATE OBJECT gr_ddlb_verksomr
 EXPORTING
 iv_source_type = 'T'.
 LOOP AT gt_verksomr_values INTO ls_verksomr_values.
 ls_ddlb-key = ls_verksomr_values-key.
 ls_ddlb-value = ls_verksomr_values-text.
 APPEND ls_ddlb TO lt_ddlb.
 ENDLOOP.
 gr_ddlb_verksomr->set_selection_table( it_selection_table = lt_ddlb ).
ENDIF.
rv_valuehelp_descriptor = gr_ddlb_verksomr.
ENDMETHOD.
Thanks
Swagatika

How can we read the screen field values from the report selection screen wi

Hi expart,
How can we read the screen field values from the report selection screen with out having an ENTER button pressed .
Regards
Razz

use this code...
AT SELECTION-SCREEN ON VALUE-REQUEST FOR p_posnr.
**Read the Values of the SCREEN FIELDs
CALL FUNCTION 'DYNP_VALUES_READ'

How to get a field value in the report

hi all :-
i need to get the field value in the formate trigger inside a specified field in the report?

please post your request in the report category forum

Want to hide the drop down based on text field value

Hi,
I want to hide some of the values in drop down based on one text field value.
I have the field called name which has the value A, B, C, D and also one drop down list which has the values 1,2,3,4,5,6. I want to hide the some of the values in drop down based on A or B or C. Let say, If it is A, drop down value should be 1,3,5. If it is B, Drop down value should be 1,2,3,4. Like this for every record.
Can you please help me out.
Thanks
Ram

Hi Robert,
I am trying it in two different way. Please suggest which is the right one and feasible.
1) I have the drop down list which has all the status. I am trying to hide the drop down values based on one text field value for all records.
2) I have collected all the drop down values into table in webdynpro method. Rightnow I have two tables.
one has line items details and another one have drop down values. both tables having common fields.
I have to show second table values for that particular key, move all of them to drop down.
Which is the best and feasible option.
Thanks
Ram

How can i transfer a field value in the main report to its sub-report?

How can i transfer a field value in the main report to its sub-report?Please eloberate with example if possible!Thanks... 

You can do a couple of things - one would be to pass the information using the data linking expert. Right click on the subreport, choose 'Change Subreport Links' and select the field(s) you are wanting to pass to the subreport. CRW will build parameters and a record selection formula for you in the subreport, and if that's what you want, then great. But you can also remove the selection formula from the subreport and work with the parameter fields in the subreport however you would like.Alternatively, you can look to passing Shared variables back and forth from the main and subreport. this link talks about the method to do this: http://diamond.businessobjects.com/node/251

The field value is't shown enough in the KNVV

Similar Messages

Maybe you are looking for