The folder you selected is not available

Hi,
We have Ex2010 and Outlook 2010. When we send calendar sharing invitation to one of user and she try to open it or do YES OR NO...the following error pops up
The folder you selected is not available
It is working fine in OWA but not in outlook. Tried to change profile, tried on different computer but same error. What is wrong?
Hasan

Hi Hasan,
Please select the recipient from Globle Address List (GAL) instead of autocomplete list. Then re-send the calendar sharing invitation to have a try. For detailed information, please refer to:
http://www.slipstick.com/outlook/sharing/folder-sharing-available-error/
Regards,
Winnie Liang
TechNet Community Support
Hi Winnie,
This is not working. Same error.
Hasan

Similar Messages

"the item you selected is not available in the uk"

I can't access the iTunes store even though I am in the UK. it's a new computer with the latest version of iTunes downloaded and running away fine but this is killing me.
any help appreciated, been through all the help topic and they come up against a brick wall, my error isn't listed. HELP!!!

Yes.
Look around. Others are seeing this as well.
Be patient, itunes will correct their issue.

After BI 4.1 configuration in SOLMAN - error message "The systems you selected do not contain any software components currently supported by E2E Workload Analysis"

Hi All,
I'm trying configure E2E monitoring. I configured all necessary steps, I can see my BI 4.1 system in SLD, also in SOLMAN, all “lights” are green. But if I start Root Cause Analysis>> Ent-to End Analysis>> My system>> Workload Analysis, I see this error "The systems you selected do not contain any software components currently supported by E2E Workload Analysis".

It would be better if you can raise the question at Remote Supportability and Monitoring Tools
and or comment in the blog post How to generate and consume an E2E trace with BI4.x (for non-SolMan landscapes)
created by Toby Johnston
Do go through the note 1871260 - The systems you selected do not contain any software
components currently supported by E2E Workload analysis for SAP HANA
Hope they help.

"The file you selected does not exist" when the file definitely exists?

Hi all,
Using Contribute CS3 against Contribute Publishing Server--
I have the site uploaded and set up within Contribute and
CPS. But I am experiencing consistent "The selected file
does not exist" errors whenever I try to open most
documents within the site. I click the "Choose"
button, navigate to a file -- I can see its contents in the
"Preview" box within the Choose dialog -- and
when I click "OK", I get that file does not exist
error.
This is happening with most but not all files in my site
tree. Trying to find a common denominator, it certainly does seem
that files which trigger this error are all templated files.
Non-templated files open fine.
Contribute is configured to talk to the server (IIS) via
WebDAV.. Am trying to get the sysadmins to enable FTP to see if
this behavior also shows up then, but have not been able to get
this done yet.
Thanks all :-)
Reuben

Would I have been better off posting this in the General
Discussion section? Could the moderators move it if so,
please?

I have the latest version of photoshop cc . Why is the focus select option not available ? (for selecting the in focus area)a)

I have the latest version of photoshop cc. Why is the focus selection option not available ?

Use CC 2014 menu Help>System Info... use its copy option and paste the info here. So we know your running CC 2014 not CC and that you have an enabled GPU....and latest device drivers.

With PS 7 create new Place two objects on the new file then you may cut copy and paste Cs2 create new place two object on the new file Cut is not available how does one cut and paste in new file

With PS 7
create new
Place two objects on the new file
then you may cut copy and paste
Cs2
create new
place two object on the new file
Cut is not available how does one cut and paste in new file

If your using File>Place then photoshop cs2 creates what's known as Smart Objects, which photoshop 7 didn't have.
In photoshop cs2 you can rasterize the smart objects and that should make the Cut function available.
Select both placed layers, right click on the area to the right of the tumbnail and select Rasterize Layers.
If in photoshop cs2 you to Help>Photoshop Help and look under Layers>Smart Objects, that should give you a good overview of what smart objects are.

Cannot install itunes 7 because os 10.6.8 is needed. I select software update and the 10.6.8 is not available to be downloaded. I'm trying to load itunes to the iphone5

cannot install itunes 7 because os 10.6.8 is needed. I select software update and the 10.6.8 is not available to be downloaded. I'm trying to load itunes to the iphone5

If you're using a PowerPC Mac, you can't.
If you're using an Intel Mac, phone the online Apple Store and order a Mac OS X 10.6 DVD.
If you don't know, choose About this Mac from the Apple menu.
(70291)

I am getting the message "the disc you inserted was not readable by this computer" when I plug in a verizon air card into my macbook air. It also does not show up as a device on my desktop. However, I select "ignore" and am still able to connect.

Whenever I insert my verizon air card into my MBA, I get the message "the disc you inserted was not readable by the computer", with the option to either ignore or eject. I select ignore, and am able to connect to the internet, but don't know why this happens. Also, the air card is not showing up as a peripheral on my desk top. Any ideas why this might be happening and how to fix it?

When I unplugged (power) and plugged in again to restart it, yes, I heard it spin and click. Not since then though. I assumed it went to sleep and since the computers don't recognize it they won't wake it.
If I need to replace it can the data on it be recovered?

Data Services- The job server you selected is not working

Long Text:
After logging in to the Data Services designer,when try to run a job it shows error -The job server you selected is not working
Latest Software version -BODS 4.0 SP2
Reproduce Steps:
1. Double click on the Project from repository, it will display the project in Project area.
2. After that it will display all the jobs under the project.
3.Right click on the job and try to execute, then it will display the "Execution Properties" windows.
Here the we can the default Job Server has been selected.
4. Try to click ok to execute the job and then we get the error-"The job server you selected is not working"

Hi
Please contact your Data services administrator to check on the server why the job server is not working.
There might be several issues like connectivity with the repository, access details , mapping in the management console etc.
And let us know the exact issue.
Regards
Puneet

I'm trying to load video file into CS6 I keep getting error message: 'Could not complete you request because the DynamicLink Media Server is not available.' No Idea what to do next. Help please.

I'm using CS6 Extended. My OS is "Windows 7 home premium.
Can no longer load video files into CS6 for edited I keep getting error message:
'Could not complete your request because the DynamicLink Media Server is not available.'
Don't know what this means. Until just now I was able to load videos without any problems. Now I'm getting this message. Any thoughts?

Hi Mylenium,
upfront:
I hope I won't be marked as spam now, since I am posting on a few relevant discussions now to this topic.
However, I really would like to ask the people who have experienced this problem to see if they were able to solve it.
Now the real deal:
I posted a question in this discussionDynamicLink Media Server won't let me import video for video frames to layers anymore.
The linked discussion is a lot younger, which is why I posted there first.
I also put in information on the steps that I have tried and my computer specifications.
I am experiencing this problem for a while now and hope you and jones1351may be able to help out.

I keep getting the iTunes error message "the item selected is not available in the UK store" how do i fix this please ?

I keep getting the error message " The item selected is not available in the UK store" and i am not able to do anything else with iTunes, any idea how i fix this as it appears to now be restricting my account access across the Mac Book, iPad, iPhone and Mac Mini in the house ?
Thanks

Hi Thanks,
I could only see posts from some months ago and thought I had something different.
Looks like I have not been using the correct search terms.
Will wait and see what happens.

SP2013: List does not exist / The page you selected contains a list that does not exist. It may have been deleted by another user

There are dozens of entries regarding "
List does not exist / The page you selected
contains a list that does not exist. It may have been deleted by another user" and none of them are really SP 2013 so i thought I would create this entry.
I am getting the error above after creating a simple list with 4 columns. the list is created during a new site definition activation but when I click on my list, I get the error above. the list works if I deactivate the feature and re-activate
it. but has the error whenever the new site definition is created.
Has anybody encountered this issue on SP 2013?

Hi，
For your issue, there are plenty of possible reasons offered when we search this issue online.
Here are similar issue posts, check whether they are helpful:
http://sharepoint.stackexchange.com/questions/98239/list-does-not-exist-error-when-opening-the-views
http://sharepoint2u.com/?p=56https://shareyourpoint.wordpress.com/2012/04/12/list-does-not-exist-the-page-you-selected-contains-a-list-that-does-not-exist-it-may-have-been-deleted-by-another-user-sharepoint-2010-error/
http://spnovice.blogspot.com/2012/10/list-does-not-exist-or-does-it.html
Best Regards,
Lisa Chen
Forum Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected]
Lisa Chen
TechNet Community Support

List does not exist . The page you selected contains a list that does not exists. It may have been deleted by another user

Hi everybody!
I have a sharepoint 2013 farm with 5 sever. I upgraded a site from sharepoint
2007 to sharepoint 2013. I had some problems to install and configure workflow manager and register it. but by now I found problems and I can create a workflow and run it successfully. My big problem is when I try to get a lookup field in my flow. the
flow suspended and I got the following error:
“List does not exist . The page you selected contains a list that does not exists. It may have been deleted by another user.”
Any solution???
Thanks in advance!

Hi,
Please make sure the source list of the lookup column and the list which consumes the content from the lookup column exists on the site collection.
In addition, to correct this problem the following steps should be applied:
Delete the affected Workflow association
Go to "Central Administration" - "Application Management"
Select the affected web application and choose "General Settings" - "Resource Throttling"
Increase the value configured as "List View Lookup Threshold"
Perform an iisreset to ensure that all in memory instances of the web application settings are gone
Add the Workflow association back to the list
More information is here:
http://social.technet.microsoft.com/Forums/en-US/3aeeba20-07dd-4e46-941b-a3db1bb3577e/sharepoint-2013-designer-workflow-the-page-you-selected-contains-a-list-that-does-not-exist?forum=sharepointcustomization
Best Regards
Dennis Guo
TechNet Community Support

HP Laserjet P1102w by USB "The disk you inserted is not readable by this computer"

My HP Laserjet P1102w used to work fine with OS X10.10. Then it started saying "The disk you inserted is not readable by this computer" whenever I switched it on, but the printer still worked. This morning it didn't. I uninstalled the printer, but can't re-install it - it isn't listed when I click "+". I have tried a different USB cable, and a different USB port - same message. The HP website does not provide a downloadable driver, as far as I can see. What do I do? (The wireless connection to the printer stopped working ages ago. The printer still works with our two PCs via USB.)

Hi Shapley,
Repairing the disk permissions can be done as following:
1. Open the the Applications folder.
2. Go to the Utilities folder.
3. Double-click on Disk Utility.
4. Select the hard drive containing the boot volume.
5. Go to the First Aid tab and select Repair Disk Permissions.
Note: This process may take several minutes depending on the Mac and amount of permissions that need to be repaired. The Progress Log will indicate when the process has been completed.
Next reboot your Mac and try plugging the USB again.
If the same persist, a such may also happen due to a conflict with the HP Smart Install feature which is Windows Based only and being wrongly read by the Mac, in order to resolve a such a Windows based PC will be required. any laptop should meet the purpose, the printer will be installed automatically by connecting the USB.
Next update and install the latest firmware below:
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=bi-115794- 2&cc=us&dlc=en&lc=en&os=4158&product=4110396&sw_lang=
Next follow the HP Smart Install Control Utility below: Select the Printer and follow the on-screen steps to disable the feature for the printer.
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=lj-129224- 1&cc=us&dlc=en&lc=en&os=4158&product=4110396&sw_lang=
NOw plug the USB back to your Mac and check for any difference
Please let me know of any change,
Shlomi

Windows "Easy Connect" does not reply with the password / "Easy Connect is not Available"

Hello,
I have posted a related question some time ago, which was eventually resolved. However, after some time a problem with Easy Connect (used for MSRA) came back:
Whenever I arrive at the point in setting up a MSRA session where Easy Connect is needed, I get the reply: "Easy Connect is not Available". Here is an example of the problem:
Start MSRA
--> as expected, a window with "invite someone to help you" and " Help some who has invited you" appears
Select "invite someone to help you"
--> as expected, a window with "Who do you want to get help from" appears
Select "Invite someone to help you"
--> as expected, a windows with "How do you want to invite your trusted helper?" appears
Select "Use Easy Connect"
--> as expected, the temporary "Create invitation window / checking network capabilities" window appears
Next, I would expect this windows to close a new window to provide me with the Easy Connect password. However, instead I get the window "Easy Connect is not available".
I cannot continue. (I have screenshots so can repost with them if that would clarity my question)
Any suggestion how to resolve would be appreciated.
(Please do not reply with the 3 suggestions from the FAQ (both computers must run windows 7 / Access to internet is limited / your router does not support Easy Connect - doesn't help)
More background information and things I have tried:
The "Easy Connect is not available" window offers the "Tell me more about how to fix this problem" which I have tried, but those suggestions do not help
If I use the other MSRA option: "Help someone who has invited you" (this would be my typical use case), followed by "help someone new" and than select "Use Easy Connect", I also get the "Easy Connect is not available"
window instead of the expected option to enter the Easy Connect password. I believe this is that same problem.
This happed with both the 32 as well as the 64 MSRA versions
I'm using Window 7 Ultimate, 64 bit with all the latest updates
This desktop PC is wired to the internet via an Edimax gigabit switch, a Dlink DIR-855 wireless router and a fiber modem in bridge mode
The W7 desktop has a single active network connection only
I'm using Windows Firewall and Windows Security Essentials
Disabling the firewall on the PC did not help
Network discovery is enabled in Control Panel\All Control Panel Items\Network and Sharing Center\Advanced sharing settings (that’s UPnP – right?)
The Internet Connectivity Evaluation Tool does not seem to be available anymore from MSFT sites
Restarting "Peer Name Resolution Protocol" did not help
Restarting "Peer Networking Identity Manager Properties" did not help
Starting up with a "Clean Boot" (disabled all non-Microsoft services using MSConfig) did not help
I would also be interested to understand how I can check on the status of the "Easy Connect" service. Is this a service hosted somewhere, or??
Thanks!

Dear Andy,
Thanks a lot for your reply. Let me answer your questions:
Q: Could you use the other methods: save this invitation as a file and use e-mail to send invitation?
A: yes, that way I can establish a MSRA connection
Q: Have you disable other network connections, including disable all virtual network card?
A: if I check with ‘Device Manager/Network Adapters’ (or Control Panel/Network and Internet/Network Connections) I see two network adapters (my Asus motherboard has two network connectors). Both are available, but only one is used. I have
disabled one. Unfortunately, this does not solve the problem. I will leave it disable for now.
Q: To find detailed information about this issue, please locate to event view and find the logs about remote assistance.
A: I have to admit that the Event Viewer is unfamiliar territory for me. So, I’m not sure where and what to look for. However, as suggested, I found "Event Viewer (local)/Applications and Services Logs/Microsoft/Windows/Remote assistance/Operational".
Each time, I attempt to use MSRA/Easy Connect, it seems two entries are added. As I cannot seem to upload files with this post, here are just the two entries:
“Diagnosis Repro Attempt resulted in a failure.”
“Remote Assistance troubleshooting has confirmed the problem: Remote Assistance Easy Connect isn't available.”
If you need more details, please suggest what to forward or check. I'm eager to find a solution!
W.

The folder you selected is not available

Similar Messages

Maybe you are looking for