The following mapped Topic IDs were not used in any topic:
Hi, I just start my Help File - RH8. One topic only. If it's writing in english "NewTopic1" compiling OK. If it's writing in Portuguese "NovoTópico1", when compile get this Note.
"The following mapped Topic IDs were not used in any topic:"
Nothing at the "Remoe Unused MAP IDs..." can you help? Thanks.
Hi,
What happens if you use a find and replace to replace all characters with umlauts in the topics before importing them? (Backup your files first though)
Greet,
Willam
Similar Messages
-
The following actions failed or were not attempted: Configuring network...
The following actions failed or were not attempted:
Configuring network
Starting push notification server.
================================
Hello All,
I'm trying to do a fresh install of Mac OS X 10.6 Server on my Mac Mini Server and at the end of the setup process I keep getting the above error.
I connect the Mac Mini Server to my home network using its build in wireless connection and when it asks me for my Primary DNS and Computer name I enter:
Primary DNS: macminiserver.private
Computer Name: Mac Mini Server
I have managed to get it complete the install once without error but I can't seem to be able to replicate the successes and it is driving me nuts Would appreciate any help and/or advice I can get.
ThanksMac OS X Server expects functional DNS. If you don't have that (and on a NAT'd LAN, you don't have it until you set it up), you'll want to let Mac OS X Server set up its own "runt" DNS server. Once that's set-up and your installation is complete, you can rip it out and replace it with your own full DNS server configuration. And as is the usual course of further confusion here, no, you can't refer to your ISP DNS here, as that's not going to get a translation for NAT'd boxes on your LAN.
Primary DNS: macminiserver.private
That's likely asking for a DNS server on your LAN. Press return and see if you can skip that prompt, and see if Mac OS X Server will then (as usual) set up the "runt" DNS server for you for this case.
Computer Name: Mac Mini Server
I'd suggest "McNair" or "Foo" or something that'll be less typing than MacMiniServer.example.com, and I'd suggest getting yourself a real and registered domain name. While you can camp out in another domain or can create your own bogus domain name, migrating domains is a hassle and if/when you want to use some of your DNS publicly, you'll need a real and registered domain. -
it conn
"cannot be read" usually means that the destination directory (as shown in the Import dialog box, in the Destination Panel) has either
been accidentally changed, so change it back to whatever it used to be; or
does not have WRITE permission, so change your permissions on that directory -
I am using Adobe Acrobat 9 Standard version in Windows 8.1 and when I try to create a .pdf file, I receive the following error message "Acrobat could not open "file name.log" because it is either not a supported file type or because the file has been damaged. To create a PDF document, go to the source application then print the document to .pdf" I am going to the source application and printing the document to .pdf yet it's saving the file as a .log file. After reinstalling the software, I initially didn't encounter this problem but on my second and third attempts to convert files to .pdf format, this error message reappeared. How do I resolve this problem?
I have a similar problem which i did not have before...and it exists only in some powerpoint files which i want to print as a pdf file...and i get the same message as above.
the log says the bellow details...what's the problem and how can i resolve it? thanks.
%%[ ProductName: Distiller ]%%
%%[Page: 1]%%
%%[Page: 2]%%
Cambria not found, using Courier.
%%[ Error: invalidfont; OffendingCommand: show ]%%
Stack:
%%[ Flushing: rest of job (to end-of-file) will be ignored ]%% -
I have an Apple MacBook Pro 1,1 Mac OS X 10.6.8. I have tried to load Native Instruments Guitar Rig 4LE.
It would not load and said the following. System extension cannot be used.
The system extension "/system/library/Extensions/AppleUSBthernetHost.text" was installed improperly and cannot be used.
Please try reinstalling it, or contact the product vendor for an update.
I do not have a copy of the OS X 10.6.8 software. It is second hand so I have no product vendor to contact.
What can I do?You recently updated iTunes to v.11.4? This message has popped up on many a Mac screen when this version was first made available, because this kext was obviously faulty.
You should try to download iTunes 11.4 again from Apple's website: the new version bears the same name, but this kernel extension has been updated, and the issues it was causing are now a thing of the past.
Should solve your problem, too... -
I try to update my apps but I get the following message: 'Your account is not valid for use in the Ireland store. You must switch to the Polish store.' I've never been using Polish store only Irish.. How to solve the problem?
Try going to the bottom of the Featured tab in the App Store app on your device and tap on your account id, tap on 'View Apple ID' on the popup and log into your account, and then select the Country/Region section and select Ireland.
-
after hibernation, when trying to login to MacBook Air, it does not accept my password. I have to shut off and then get prompted with the following: Mac OS X wants to use the "login" keychain. I put in the password there and it works. any suggestions?
Back up all data.
Launch the Keychain Access application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Keychain Access in the icon grid.
Select the login keychain from the list on the left side of the Keychain Access window. If your default keychain has a different name, select that.
If the lock icon in the top left corner of the window shows that the keychain is locked, click to unlock it. You'll be prompted for the keychain password, which is the same as your login password, unless you've changed it.
Right-click or control-click the login entry in the list. From the menu that pops up, select Change Settings for Keychain "login". In the sheet that opens, uncheck both boxes, if not already unchecked.
From the menu bar, select
Keychain Access ▹ Preferences ▹ First Aid
If the box marked Keep login keychain unlocked is not checked, check it.
Select
Keychain Access ▹ Keychain First Aid
from the menu bar and repair the keychain. Quit Keychain Access. -
onjour
j ai des probleme au demarage d iphoto le dialogue s affiche et me demande le texte suivant ?
138 photos n’ayant pas été importées ont été trouvées dans la bibliothèque iPhoto.
Souhaitez-vous les importer ? oui ou non avez vous deja rencontrer ce proble si oui pouvez vous m aider
Merci
Hello
J have problem in the demarage d iphoto the dialogue displays and asks me for the following text?
138 photos not having been imported were found in the iPhoto library(bookcase).
Would you care for import them? Yes or no you already have meet this prowheat if yes can you m help
Thank youOpen your iPhoto Library package with the Finder as shown in this screenshot
and look in the folder named Auto Import. Move any files in that folder to a folder on the Desktop and close the package. Do not make any other changes. Launch iPhoto (the message should be gone) and drag the folder on the Dersktop into the open iPhoto window to import them.
OT -
since installing the latest update, Firefox first operated with some errors but now will not load at all; it gives me the following error --
XML Parsing Error: not well formed
locations chrome://browser/content/browser.xml
Line Number 1191, column 20:
utton id="back-forward-dropmarker" type="menu" chromedir="&locale.dir;"-------------------
please note that the words "utton ID" are exactly as the error message gives it; and at the end of the message there are exactly 19 hyphens.
I don't know why this faulty code is referencing things to do with "chrome"... the Chrome browser is not installed on this PC or anywhere on our network.
Also, this is not the first problem I had after clicking Firefox's prompt for the latest update. Before Firefox retreated into this error message, it was loading but running with some faults...
1. the bookmark symbol was not appearing on the right hand side of the URL line, so I had always to click on "bookmark this page", after which the bookmark symbol did appear; however I don't know if the bookmarking function worked properly.
2. the back and forward buttons were not highlighted, as if I had not come from a previous page; so once I clicked on a link to a new page I could not go back to where I came from because Fiefox thought I hadn't come from anywhere.
3. there may have been other errors, but I did not find them.
How do I reinstate my Firefox program to work properly please? do I have to download the latest version and reinstal? if so, do I have to remove the old version first? or is there a fix?
Even to write this message I have been forced to use (yuk -- I don't like to say this!!!) Internet Explorer. So please -- I need help urgently.
Thanks,
NOELSome how I solved my problem by opening a user account and downloading Firefox 4.0 beta and installing it, I did try it, worked fine, so I did close the user account and did go back to my own account(switched user), the main page that I had problem with Firefox which would not open, I dabble click on Firefox it start working again!! I hope that solves your problem too.
firefox will not open, it gives me this cod and would not turn off, Error on switching in renew: NS_ERROR_UNEXPECTED, Component returned failure code: 0x8000ffff (NS_ERROR_UNEXPECTED) [nsIPrefBranch.getCharPref] id: none -
Firefox doesn't know how to open this address, because one of the following protocols (itms-services) isn't associated with any program or is not allowed in this context.
You might need to install other software to open this address."
tried to fix in about:config but itms-services not foundn; also tried to fix using network.protocol-handler.external.foo but that wasn't listed either
trying to download an app related to a rewards gift card
firefox and os versions are up to date on MacBook AirHello!
Would you please provide the link you were trying to visit?
Also, you may want to post this question to the [https://support.mozilla.org/en-US/questions/new/desktop Firefox for Desktop Support Forum] . The Mozilla Support volunteers there may be able to better assist you.
I hope we can help you solve your problem. -
I get nothing but error messages, -
"Your IMAP server wants to alert you to the following: 113 that mail is not available" or the same with: 364?
Now there are hundreds stacked up on my desktop.
I cannot find the answer anywhere. You need to give answers to how to fix these errors because when I "search" "error code" or the number there is NOTHING. NOTHING! Yet you give us these stupid error codes
then you do not give us ANYTHING on how to fix these. These error codes make me so mad it makes me hate outlook, and hate the developers and hate microsoft. How in the world can you give us ERROR codes without the explanation of what
to do or how to fix it. You need to add each error code number in your "search" then explain what it is and how to fix it. I am not a tech. I am a lawyer. I have googled the entire string of error code and nothing is clear.
So, for the last several years, I get these error codes. Also, there is another error code that won't go away--it is the password error code that asks if I want to store the password. Yes, so I say YES. but it pops back. I am sick of this. This is the reason
I hate Microsoft and I love google. #1 they respond to error, #2 them try to fix them you do not. I paid the full price to buy the OUtlook 2010, almost $500 just to get outlook, and all I got was error codes. I could not even open it because all I would get
was that error codes and NO ONE knew how to fix them. WHAT IS YOUR PROBLEM that you cannot fix the stupid error codes that you imbed? PLEASE HELPHi,
I understand how frustrated you are when facing such an issue, maybe I can provide some suggestions on the problem.
Based on the description, you should be using an IMAP account setup in Outlook. As for the error message, usually it's caused by a corrupted message on the Server. I suggest you logon the Webmail site, check if sending/receiving emails works well.
If you find any unusual emails that cannot be read or sent, try deleting them to try again.
I also suggest you create a new profile to setup the IMAP account:
http://support.microsoft.com/kb/829918/en-us
Contact your Email Service Provider to get the correct and latest account settings, since you have been using Outlook for years, some settings may have been changed while you haven't been informed.
For the steps to setup an account in Outlook 2010, please refer to:
http://office.microsoft.com/en-001/outlook-help/add-or-remove-an-email-account-HA010354414.aspx
I hope this helps.
Regards,
Melon Chen
TechNet Community Support -
I get the following message - "Time Machine could not complete the backup." "Unable to complete backup. An error occurred while creating the backup folder.""
This MAC is partioned with Windows 7 with only 50 gig devoted to Windows so my son can play Flight Simulator X on the machine.
I have a WD Passport External Hard Drive for the Back Up
I have spoken with WD Tech Support and they have been fantastic but I still keep getting this message. Any thought?
MaxxReboot the TC.. it sometimes gets lost on the network.. are you still actually using 10.6.8 as the problem is more prevalent on Lion and ML it seems is no better.
You might find reset of the TC is needed. change the names to short, no spaces pure alphanumeric.
Reset the TM to the new name.. use the A4 in Pondini's great KB.
http://pondini.org/TM/Troubleshooting.html -
Got error - Some of the videos in you library were not copied to the ipod becasue they cannot be played on this ipod. The videos were purchased from Itunes, so not sure how to fix this?
Hi JEG9,
If you are having issues transfering videos to your iPod Touch, you may find the following article helpful:
iTunes: May be unable to transfer videos to iPhone, iPad, or iPod
http://support.apple.com/kb/TS1497
Regards,
- Brenden -
When trying to connect to the itunes store on my MacBook Pro, I get the following error message: "iTunes could not connect to the iTunes Store. An unknown error occurred (-54) Make sure your network connection is active and try again."
I've had the same problem for a month and yet I still cant get iTunes to work, I've heard different solutions but none have worked for me
This may or may not work for you but its worth a try even though it didnt seem to work for me, Good Luck!
Control Panel
Internet Options
Connections Tab
Click LAN Settings
Uncheck "Use A Proxy Server" -
I have created a farm solution and then i deploy it to SharePoint server, the code looks as follow, and i use it to update a page info values (as the current page values represents old info):-
[ToolboxItemAttribute(false)]
public partial class VisualWebPart1 : WebPart
// Uncomment the following SecurityPermission attribute only when doing Performance Profiling using
// the Instrumentation method, and then remove the SecurityPermission attribute when the code is ready
// for production. Because the SecurityPermission attribute bypasses the security check for callers of
// your constructor, it's not recommended for production purposes.
// [System.Security.Permissions.SecurityPermission(System.Security.Permissions.SecurityAction.Assert, UnmanagedCode = true)]
public VisualWebPart1()
protected override void OnInit(EventArgs e)
base.OnInit(e);
InitializeControl();
using (SPSite site = new SPSite(SPContext.Current.Site.Url))
using (SPWeb web = site.OpenWeb())
SPList list = web.Lists["Pages"];
web.AllowUnsafeUpdates = true;
foreach (SPListItem items in list.Items)
items["Author"] = "SharePoint";
items["Created"] = "01/08/2014 01:44 PM";
items.Update();
list.Update();
web.AllowUnsafeUpdates = false;
protected void Page_Load(object sender, EventArgs e)
but when i try adding this web part to a page i got the following error:-
Invalid data has been used to update the list item.The field you are trying to update may be read only
so can anyone advice?i only changed lines bitween
web.AllowUnsafeUpdates = true;
and
web.AllowUnsafeUpdates = false;
and other parts of code remains without change
so it will updates all pages in current web
yaşamak bir eylemdir
Maybe you are looking for
-
Urgent Help Needed for WVC210 camera setup :)
Please help! I am trying to set up a Cisco WVC210 surveilance camera at one of the stores owned by the company I work for. Its a small business and I am the closest they have to an I.T person !! I have plenty of experience with software but not muc
-
Several LR3 issues - Crashes, memory dumps, and other oddities
I recently built a new PC dedicated to my photo work. i7 2600k, 16gb DDR 3 ripjaws, 128GB crucial m4 SSD, (2) x 1TB 7200 HDDs (mirrored), Sapphire Radeon HD 5570. The first month or so of use LR worked great. However, recently I have been getting sev
-
Can I download my acrobat X standard onto my new Netbook?
I bought ACROBAT X and downloded it onto my desktop. How can I download it to my new netbook?
-
How can I pick what is selected in a report and form appication
I have the need to pick what is selected , say the primary key from what is selected in the first form. Thanks, Doug
-
I have Elements 10, Can I process Raw photos in it?