The following actions failed or were not attempted: Configuring network...
The following actions failed or were not attempted:
Configuring network
Starting push notification server.
================================
Hello All,
I'm trying to do a fresh install of Mac OS X 10.6 Server on my Mac Mini Server and at the end of the setup process I keep getting the above error.
I connect the Mac Mini Server to my home network using its build in wireless connection and when it asks me for my Primary DNS and Computer name I enter:
Primary DNS: macminiserver.private
Computer Name: Mac Mini Server
I have managed to get it complete the install once without error but I can't seem to be able to replicate the successes and it is driving me nuts Would appreciate any help and/or advice I can get.
Thanks
Mac OS X Server expects functional DNS. If you don't have that (and on a NAT'd LAN, you don't have it until you set it up), you'll want to let Mac OS X Server set up its own "runt" DNS server. Once that's set-up and your installation is complete, you can rip it out and replace it with your own full DNS server configuration. And as is the usual course of further confusion here, no, you can't refer to your ISP DNS here, as that's not going to get a translation for NAT'd boxes on your LAN.
Primary DNS: macminiserver.private
That's likely asking for a DNS server on your LAN. Press return and see if you can skip that prompt, and see if Mac OS X Server will then (as usual) set up the "runt" DNS server for you for this case.
Computer Name: Mac Mini Server
I'd suggest "McNair" or "Foo" or something that'll be less typing than MacMiniServer.example.com, and I'd suggest getting yourself a real and registered domain name. While you can camp out in another domain or can create your own bogus domain name, migrating domains is a hassle and if/when you want to use some of your DNS publicly, you'll need a real and registered domain.
Similar Messages
-
The following mapped Topic IDs were not used in any topic:
Hi, I just start my Help File - RH8. One topic only. If it's writing in english "NewTopic1" compiling OK. If it's writing in Portuguese "NovoTópico1", when compile get this Note.
"The following mapped Topic IDs were not used in any topic:"
Nothing at the "Remoe Unused MAP IDs..." can you help? Thanks.Hi,
What happens if you use a find and replace to replace all characters with umlauts in the topics before importing them? (Backup your files first though)
Greet,
Willam -
it conn
"cannot be read" usually means that the destination directory (as shown in the Import dialog box, in the Destination Panel) has either
been accidentally changed, so change it back to whatever it used to be; or
does not have WRITE permission, so change your permissions on that directory -
Good morning, I have the following problem. I can not start Adobe Muse on my computer because I get a box Assertion Failed in file "... \ src \ ape \ DOMFontProvider.cpp" at line 482: numFontadded = = 1
Doregisterfont fail to add font. Check museapp \ hello \ resources for missing filesAre you still facing the same issue ? if yes then please post the screenshot of exact error and few details such as if you are getting this error while opening a specific file or on double click on Muse itself ?
Thanks,
Sanjit -
When attempting to install OS X Mountain Lion I get the following error message "We could not complete your purchase. OS X Mountain Lion is not compatible with this computer." Any idea what the issue might be?
Mama --
Which Mac??????
iMac, MacBook Pro, Mini,, what?
Go up to the Apple icon on the upper left hand corner of your screen (menu bar).
Click that, and then "More Info". and then "More Info" again.
What does it say? Here's what mine says: -
Hello,
When I connect my iPhone 4S to my MacBook Pro (through the USB port), the synchronization process by iTunes failed with the following message "My iPhone could not be synchronized, because the synchronization process has not started".
What does that mean?
Thanks in advance for fixing my problem.I think I remember hearing that if you quit iTunes with your device still connected, then open iTunes up again, it should work.
EDIT: Here, this might help: http://support.apple.com/kb/ts1567 -
onjour
j ai des probleme au demarage d iphoto le dialogue s affiche et me demande le texte suivant ?
138 photos n’ayant pas été importées ont été trouvées dans la bibliothèque iPhoto.
Souhaitez-vous les importer ? oui ou non avez vous deja rencontrer ce proble si oui pouvez vous m aider
Merci
Hello
J have problem in the demarage d iphoto the dialogue displays and asks me for the following text?
138 photos not having been imported were found in the iPhoto library(bookcase).
Would you care for import them? Yes or no you already have meet this prowheat if yes can you m help
Thank youOpen your iPhoto Library package with the Finder as shown in this screenshot
and look in the folder named Auto Import. Move any files in that folder to a folder on the Desktop and close the package. Do not make any other changes. Launch iPhoto (the message should be gone) and drag the folder on the Dersktop into the open iPhoto window to import them.
OT -
SharePoint 2013 - PowerPivot - The following connections failed to refresh.
Thanks for taking a look. I have tried countless blogs and other forum posts and can't seem to resolve this.
I am working on SP2013 with SQL Server 2012 in a single farm environment. My domain is on another VM.
I am using interactive refresh. (Click Data > Refresh All Connections) from the PP Workbook in SharePoint.
The connection is embedded.
I am getting the error "We were unable to refresh one or more data connections in this workbook. The following connections failed to refresh: (Name of my connection). The connection is using windows authentication
What I have tried:
I have checked ULS Logs, nothing showing up unfortunately.
I checked local system messages on server, nothing there.
I changed both the PowerPivot and Excel Services application pools to run under Domain\Administrator
I changed both the PowerPivot and Excel Services unattended accounts to run under Domain\Administrator
Ran IISReset command from windows powershell.
Restarted SSAS Services
Verified the Server was registered in Excel Services (Data Model Settings)
Verified that data refresh was enabled on the PowerPivot workbook at the site collection level.
In central administration I set the business hours to 6am - 8am for data refresh so this would not be an issue.
I verified that the Secure Store Service is started in central administration
I have also ran SQL Server Profiler and all I see is this error, i'm not even sure it's related. Searching the error hasn't helped:
"The commit or rollback request cannot be completed because there is no active transaction in this session."
I verified that Claims to Windows Token Service is running in central administration.
I've tried editing the workbook connection to use specified accounts as well. When I do that I get the following error:
An error occurred while accessing application id SP2013\Administrator from the Secure Store Service. The following connections failed to refresh: (My connection name).
Any help or direction would be much appreciated. Thanks.did you try below technet guide?
Unable to refresh data for a data connection in the workbook. Try again or contact your system administrator. The following connections failed to refresh: PowerPivot Data
also check this guy:
http://voices.yahoo.com/powerpivot-error-unable-refresh-data-data-11642048.html?cat=15
Are you using the office web apps?
https://blogs.technet.com/b/excel_services__powerpivot_for_sharepoint_support_blog/archive/2013/01/31/powerpivot-for-sharepoint-browser-refresh-fails-data-refresh-not-supported-in-office-web-apps.aspx
Please remember to mark your question as answered &Vote helpful,if this solves/helps your problem. ****************************************************************************************** Thanks -WS MCITP(SharePoint 2010, 2013) Blog: http://wscheema.com/blog -
I am using Adobe Acrobat 9 Standard version in Windows 8.1 and when I try to create a .pdf file, I receive the following error message "Acrobat could not open "file name.log" because it is either not a supported file type or because the file has been damaged. To create a PDF document, go to the source application then print the document to .pdf" I am going to the source application and printing the document to .pdf yet it's saving the file as a .log file. After reinstalling the software, I initially didn't encounter this problem but on my second and third attempts to convert files to .pdf format, this error message reappeared. How do I resolve this problem?
I have a similar problem which i did not have before...and it exists only in some powerpoint files which i want to print as a pdf file...and i get the same message as above.
the log says the bellow details...what's the problem and how can i resolve it? thanks.
%%[ ProductName: Distiller ]%%
%%[Page: 1]%%
%%[Page: 2]%%
Cambria not found, using Courier.
%%[ Error: invalidfont; OffendingCommand: show ]%%
Stack:
%%[ Flushing: rest of job (to end-of-file) will be ignored ]%% -
since installing the latest update, Firefox first operated with some errors but now will not load at all; it gives me the following error --
XML Parsing Error: not well formed
locations chrome://browser/content/browser.xml
Line Number 1191, column 20:
utton id="back-forward-dropmarker" type="menu" chromedir="&locale.dir;"-------------------
please note that the words "utton ID" are exactly as the error message gives it; and at the end of the message there are exactly 19 hyphens.
I don't know why this faulty code is referencing things to do with "chrome"... the Chrome browser is not installed on this PC or anywhere on our network.
Also, this is not the first problem I had after clicking Firefox's prompt for the latest update. Before Firefox retreated into this error message, it was loading but running with some faults...
1. the bookmark symbol was not appearing on the right hand side of the URL line, so I had always to click on "bookmark this page", after which the bookmark symbol did appear; however I don't know if the bookmarking function worked properly.
2. the back and forward buttons were not highlighted, as if I had not come from a previous page; so once I clicked on a link to a new page I could not go back to where I came from because Fiefox thought I hadn't come from anywhere.
3. there may have been other errors, but I did not find them.
How do I reinstate my Firefox program to work properly please? do I have to download the latest version and reinstal? if so, do I have to remove the old version first? or is there a fix?
Even to write this message I have been forced to use (yuk -- I don't like to say this!!!) Internet Explorer. So please -- I need help urgently.
Thanks,
NOELSome how I solved my problem by opening a user account and downloading Firefox 4.0 beta and installing it, I did try it, worked fine, so I did close the user account and did go back to my own account(switched user), the main page that I had problem with Firefox which would not open, I dabble click on Firefox it start working again!! I hope that solves your problem too.
firefox will not open, it gives me this cod and would not turn off, Error on switching in renew: NS_ERROR_UNEXPECTED, Component returned failure code: 0x8000ffff (NS_ERROR_UNEXPECTED) [nsIPrefBranch.getCharPref] id: none -
Got error - Some of the videos in you library were not copied to the ipod becasue they cannot be played on this ipod. The videos were purchased from Itunes, so not sure how to fix this?
Hi JEG9,
If you are having issues transfering videos to your iPod Touch, you may find the following article helpful:
iTunes: May be unable to transfer videos to iPhone, iPad, or iPod
http://support.apple.com/kb/TS1497
Regards,
- Brenden -
Photos have been found in the iPhoto Library folder that were not imported
Whenever I start iPhoto, I get an error that says:
5 Photos have been found in the iPhoto Library folder that were not imported. Would you like to import them now?
http://www.fredmccann.com/error.png
If I say no, the dialog goes away but you get it the next time you start iphoto. If I say yes, then iphoto tries to import something (I don't know what) and hangs. I've let it run for two hours and nothing ever gets imported. What's worse is that every time I try to let it import, it increments the number of pictures it thinks is missing. The first time it said 3 photos. I let it attempt an import and it froze. The next start it claimed there were 4. It's up to 5 now and I've figured out that letting it try to import whatever it thinks is missing is a bad idea.
Has anyone seen this problem before? Any suggestions?
iBook G4 Mac OS X (10.4.8)booleanman:
Welcome to the Apple Discussions. This Apple KB document may have the solution to your problem: Unimported photos found in Library when iPhoto is launched.
Do you Twango?
TIP: For insurance against the iPhoto database corruption that many users have experienced I recommend making a backup copy of the Library6.iPhoto database file and keep it current. If problems crop up where iPhoto suddenly can't see any photos or thinks there are no photos in the library, replacing the working Library6.iPhoto file with the backup will often get the library back. By keeping it current I mean backup after each import and/or any serious editing or work on books, slideshows, calendars, cards, etc. That insures that if a problem pops up and you do need to replace the database file, you'll retain all those efforts. It doesn't take long to make the backup and it's good insurance. -
The following query failed: GetUserProfileByName - with the wrong username
I have 2 users (out of 800), who run into this issue on occasion. Their username is 'fccs\user1' in the profile db, and in every UserInfo table in the system. But when they try to go to certain sites or open an infopath form, this error gets thrown:
The following query failed: GetUserProfileByName (User: FCCS\[email protected], Form Name: Template, IP: , Connection Target: , Request: http://fccsteams/sites/DataManagement/Tasks/Lists/Tasks/Folders1.aspx?RootFolder=/sites/DataManagement/Tasks/Lists/Tasks/2013/11&, Form ID: urn:schemas-microsoft-com:office:infopath:list:-AutoGen-2013-08-05T23:14:53:458Z Type: DataAdapterException, Exception Message: The remote server returned an error: (500) Internal Server Error. Operation Failure ---> Access Denied: To create a user profile, you must be an administrator, or create your own profile and have personal features rights. UnauthorizedAccessAccess Denied: To create a user profile, you must be an administrator, or create your own profile and have personal features rights. The remote server returned an error: (500) Internal Server Error.)
Notice how the username is now the entire email address and not just the username. I have no idea why it thinks that that is their username. Any ideas?Hi,
According to your post, my understanding is that you got query failed error.
Melick had written a blog said that the form access the user profile web service (Userprofileservice.asmx) using UDC
file.
You can check whether the UDC connection was still pointing to root site.
You can change this file to match with the sub site collection. Otherwise there may be a cross domain access issue.
There are similar threads for your reference.
http://social.msdn.microsoft.com/Forums/sharepoint/en-US/9c2f7f4c-0fa9-43bd-94b1-1d7075e35841/5566-error-with-getuserprofilebyname-and-infopah-browser-forms-using-claims-based-authentication
http://social.msdn.microsoft.com/Forums/en-US/49753330-40c0-4327-9a9b-2c3304a74e67/sharepoint-infopath-and-populating-forms-with-ad-data?forum=sharepointcustomizationlegacy
Thanks & Regards,
Jason
Jason Guo
TechNet Community Support -
WDS PXE Problems on 1 model of PC only - The following Client failed TFTP Download - Error Code 1460
Hey all,
I am experiencing a problem with my WDS PXE Environment, with 1 specific model of PC's only. This is a Dell XPS machine with an Intel e1000 nic in it.
The problem is that when you PXE Boot, it starts off fine, and I reach a menu that has all of my boot images listed, but as soon as you pick one it hangs on a black screen.
From the event viewer on the server I can see the following entry:
The Following Client failed TFTP Download:
IP: 10.130.148.211
Filename: \Boot\Boot.SDI
ErrorCode: 1460
I've done some google searching and found some topics that could be related, but none of the fixes mentioned helped me. This is the one I tried:
http://social.technet.microsoft.com/Forums/en-US/winserversetup/thread/a1246f62-6a8a-482b-9323-7e02dfeab196/#52aaf6fb-9494-4327-bbc3-8afe3e78905c
The problem I had was that the link they gave to the Hotfix, doesnt actually have anyway to download the hotfix!!
http://support.microsoft.com/kb/975710
Although
I am not convinced that packet size is the problem here, more likely some network or disk controller driver issues??
No
idea at all where to go from here. It is only this one model of PC that fails, and all others work fine. If someone can point me in the right direction it would be very greatly appreciated.
I
would be happy to provide you with any additional details you may require.
Thanks,
-BenYou need to contact CSS to get this fix.
Hotfix Information
A supported hotfix is now available from Microsoft. However, it is intended to correct only the problem that is described in this article. Apply it only to systems that are experiencing this specific problem. This hotfix may receive additional testing. Therefore,
if you are not severely affected by this problem, we recommend that you wait for the next Windows Server 2008 service pack that contains this hotfix.
To resolve this problem immediately, contact Microsoft Customer Support Services to obtain the hotfix. For a complete list of Microsoft Customer Support Services telephone numbers
and information about support costs, visit the following Microsoft Web site:
http://support.microsoft.com/contactus/?ws=support (http://support.microsoft.com/contactus/?ws=support)
John | Program Manager | System Center Configuration Manager -
When its over 100% do the following actions
Hello,
We have a following script.
Purpose of this script is to received email notifications when FS /opt is over 90%.
PCT_USED=$(df -k /opt | tail -1 | awk '{print $4}' | sed 's/%//')
echo "Info:PCT_USED:[$PCT_USED]"
MY_THRESHOLD=90
if [ $PCT_USED -gt $MY_THRESHOLD ]; then
mail -s "/opt is Over 90% in TestNode 1" [email protected] < /home/oracle/FSwatch.log
mail -s "New Changes to the FS in Test Node 1" [email protected] < /home/oracle/NewFile.log
mail -s "Here are the Large files over 100MB from Test Node1" [email protected]
< /home/oracle/LargeFile.log
echo "Info:Sending Mail"
else
echo "Info: Usage [$PCT_USED] not greater than [$MY_THRESHOLD]"
fi
We get values from the cron job as below:
30 6,14,22 * * * ( date ; df -h / /opt /tmp /dev /bkup /var /usr /opt/oracle/clearcase_release /var/vobstore /wcmsrch) >> /home/Oracle/FSwatch.log 2>&1
45 6,14,22 * * * ( date ; find /opt -mtime -1 -ls ) >> /home/Oracle/NewFile.log 2>&1
50 6,14,22 * * * ( date ; find /opt -size +100000k ) >> /home/Oracle/LargeFile.log 2>&1
00 7,15,23 * * * /home/Oracle/callover90
Now I would like to add logic when its over 100% do the following actions.
1) send message to the users to contact system administrator
2) remove /opt/oracle/headdump/javacore (remove all javacore files)
How to add this logic?
DI have added following logic in our existing program to find FS size, new files, size over certain numbers:
mail -s "Action1:Please remove javacore files" [email protected]< /home/oracle/action1
mail -s "Action 2:Please contact System Administrator" [email protected]< /home/oracle/action2
# more action1
Please remove javacore files from /opt/oracle/AppServer/profiles/AppSrv01
#Here is the command to remove all javacore files from the System, cd to above p
ath and run the command as
# rm javacore*
#more action2
Please contact System Administrator for further assistance
Do u have any better thought?
D
Maybe you are looking for
-
For the past two weeks I have had issues staying connected to xbox live gameplay. I never get kicked off live just out of the game. I will be playing a game and midway through I will get disconnected. Here is my set up. Wired Connection (purchase
-
How to support mutil-language in abap web dynpro
HIi, guys , Can you kindly tell me how to translate a button's text or group's name into multi-language in abap web dynpro ? thanks . Jialiang.Qiu
-
RRestoring from iCloud backup to iPhone 6 from 4 and when I check cloud storage settings it shows iPhone 4 with all the data and none for new iphone 6 should I delete the iPhone 4 backup
-
Strange effects using distortion controls (within motion tab)
I have been trying to put a vanishing point perspective on a clip by pulling two corners of the clip to the centre of the screen. It looks great in the canvas as I make the adjustments but when I try to render or export the clip the result is not uni
-
HI, I often take screenshots from my screen. I do this by hitting the 'PrtScrn' button on my keyboard. Then I go to PHotoshop, make a new image and paste, but it doesn't paste the recently copied screen that is in the clipboard...?! Does anyone have