The good The Bad and the....
Many people have many different issues with the phone. Some hate it, some love it and some just trash talk the phone cause either their jealous cause they can't get one for other reasons. But in all seriousness I'm no Apple fan-boy though my brother is and I have always been a fan of windows(only OS that plays games). But since I got my iPhone I think to my self how could I live without it. Since I got my phone I started working out and on the phone I can write down what all I did to improve. Also I can listen to Modest Mouse while running 3 miles in 90 degree weather. Plus if I get call from one of my friend I won't miss it cause I was running. Yes, there are some problems with the phone like: I wish I could use custom ring-tones and volume is a little low(which is why I'm bought the Apple Bluetooth headset). All my friends said I was crazy for buying the iPhone for $600. They were like who spends $600 on a phone. The I told them I'm not, I'm getting a iPod(needed a new one , also a camera, and also I will be able to get email and time any place, also be able to browse the Internet anywhere.
Yeah, does design the coolest devices out there.
Hopefully some issues will be addressed, unlocked or added with future software updates.
Glad you like that phone. So do i. It's like my "mini" laptop that fits in my pocket
Similar Messages
-
Is this good or bad in terms of battery life?
So I have a question, my usage is 1 hour, 11 minutes; standby is 13 hours, 29 minutes. This is since the last full charge on my iphone4s and now the battery is at 68%. Is this good or bad, and the thing is when I used certain apps like words with friends even for 2-3mins I actually noticed the battery life going down 2%, and I know that because I have the option for showing the battery percentage switched to on. It's frustating that I'm doing the simplest task like going through settings and the battery is draining so quickly. Does anyone have and suggestions about increasing the battery life?
The short battery life is an issue of iOS5 that should be fixed with the next updates. ( also hope that Apple would fix it fast)
-
Sony M4 Aqua Review- The Good , The Bad and The Faulty
The small capacity "cheap" android phones are best avoided, tbh. The flagship phones, even 3 year old ones, are much better buys that an up to date small capacity phone.
I assume you have tried the app called "apps2sd" to see if any others can be moved away from the internal storage?I bought the M4 as a replacement for my iphone 4. Although I like Apple products I looked at the new iphones and they didnt seem that different than my old phone other than speed and screen size and I felt like trying some thing new.My wife swapped her iPhone for a Z3 Compact and it seemed good. Nice screen, good camera, very customisable and waterproof. All for less than an Apple, so I thought I'd give it a go.So, The Good - Good screen size and feel to the phone. Easy set up and transfer of data using xperia exchange via my macbook. Even managed to sync Macbook calendars with phone via great Sunrise App from Playstore.The Bad, although the phone only has 8Gb of internal memory I though this with a microSD card 16 Gb would be enough as my iPhone only had 8Gb in total. I dont store a great deal of music and photos on the phone as I download regularly. I was wrong though as the Lollipop Android operating system used aapprox half the 8Gb and the onboard Sony software approx 2Gb I was left with between 1.5 and 2Gb for apps as some wont download to SD cards. So I wasn't able to use all the apps I had on the iPhone. Now, The Faulty - only hours after setting up the phone and all the apps I could, an app update notification came through. The only problem? There wasn't sufficient memory space to update. So I removed all the apps I had added and updated the mandatory apps - a ball ache but it worked, I then had to reload the apps, along with the Sony apps, which had now taken up more memory and left only 1-1.5 gb for apps. The SD card cover keeps popping open when in your pocket. The phone started to say there was no SIM card and no sevice.Three weeks into ownership and the phone has frozen while on charge, won't reboot and has had to go back to the factory for repair with consequent loss of data. Under 28 days and O2 insist on repair not replacement - poor service.Conclusion - Nice looking phone, Nice features, but the memory is insufficient for the operating system and software they have included on the phone. The compact Z3 would be better if you can live with a smaller screen. Will I stick with Sony for 2 Years like i did Apple?- the jury is out.
-
I got my battery replace today and must know is the battery health good or bad!
I got my battery replace today and must know is the battery health good or bad!
Here are the datails direct from the ibackupbot Programm
Battery
CycleCount: 231
DesignCapacity: 1420
FullChargeCapacity: 1258
Status: Success
BatteryCurrentCapacity: 78
BatteryIsCharging: false
ExternalChargeCapable: false
ExternalConnected: false
FullyCharged: false
GasGaugeCapability: true
My Phone info
iPhone 5 64GB
iOS 7.1.2
Please I really have to know it!
Thanks in advance!sorry but I get my battery replaced by another local Service store called "http://handy-doktor.info"!
So accourding your answer is my battery not a new one, right??
Thanks in advance! -
What can Apple do if my Iphone 5s has dust in its camera? The camera is very bad and can't take any good pictures. Can Apple do anything or give me a replacement phone if I go to the Store?
You can make a Genius Bar appointment to have the device looked at. If the device is still under warranty and they identify a problem, then Apple makes the final decision as to a replacement. If the device is out of warranty and they identify a problem, you would be offered the opportunity to purchase an out of warranty replacement at a discounted price.
-
How to find a badi and how to find the method/methods for a transaction?
Hi all,
i need to give a text either while creating customer (vd01) or changing customer(vd02)...thsi is via extras->texts.....then I have to double clik the text and go to change editor...and then i have to clik on insert line and then choose text element radiobutton on screen and then give it a name and then save it..this should be done for all customers....my problem is i am unable to find a badi and the appropriate method for thsi..i have placed break point in method read_add_on_data in the badi customer_add_data....i tested both by transactions va01 and va02 but of no use..also there are so many methods..can u tell me how do i find the appropriate method of the appropriate badi.....Hi,
For XD01/XD02/XD03 The following BADI's are useful
business Add-In CUSTOMER_ADD_DATA and business Add-In CUSTOMER_ADD_DATA_CS .
*<b>Reward points</b>
Regards -
My hard drive went bad and I lost a lot of purchased items from the iTunes store. I want to re-download them but can not. They still show up on my purchased items. How do I solve this?
Update to iTunes 10.3.1
After you have finished, you can re download your iTunes purchases without having to re purchase.
iTunes 10.3.1
" Download Previous Purchases. Download your past music purchases again at no additional cost. Your purchases are available in the iTunes Store on your Mac or in the iTunes app on your iPhone, iPad, or iPod touch. Previous purchases may be unavailable if they are no longer on the iTunes Store."
"Available on iTunes in the U.S. and Canada only. Title availability is subject to change."
From here. http://www.apple.com/itunes/ -
I updated my iphone and when it came time for activation it won't work and keeps telling me to try again. At the top it says "No Service" and I have my SIM card in and a good WiFi connection and have connected it through iTunes but it says I have no SIM card and need to disconnect and insert my SIM. I don't understand why this keeps happening and it's been going on for a wile now. I have tried over and over again to get this iPhone to work but nothig is happening. I've even gone on the website for support (apple.com/support) but cannot find anything that will help me with this situation. Can someone please help me find a solution to this problem? I have been without a phone and do not have money to buy another one and it is crucial for me to get it fixed. Thanks.
wesb
What computer operating system is involved in the Premiere Elements 11 and 13 issues? Same computer or different ones? Are you installing from purchased download installation files or from purchased installation disc? Does Premiere Elements 11 work completely on this computer whereas 13 will not?
Let us go through the typical drill so as to take nothing for granted.
1. Does the problem exist with or without the antivirus and firewall(s) disabled? Are you working with an individual home computer or in a
school or company network?
2. Are you running the program as Administrator and is there any "domain" account involved?
3. Is your video card/graphics card up to date according to the web site of the manufacturer of the card?
4. Do you have the latest version of QuickTime installed on the computer with Premiere Elements?
Let us start by ruling in or out any of the above, and then we can decide what next.
Any questions or need clarification, please do not hesitate to ask.
Thank you.
ATR -
I have an imac and a macbook pro. my creative suite 5.5 design premium is on them both. I'm about to take them in to the apple store because they are running bad and have them completely restored to factory settings. when I get them back will i be able to re-install my adobe creative suite to both of my computers using my same product code from when i first bought it?
Yes. Just make sure to deactivate the license on both systems using Apple menu --> Deactivate while one of the suite programs is running.
Mylenium -
Values in "vendor batch" in the Goods-in-order and Goods-in-plan lists are
Vendor batch No. : Transaction ZJPMPU322
(Background)
There are "vendor batch" and "batch" fields in Goods-in-order and Goods-in-plan lists (transaction ZJPMPU322). Values for these fields are retrieved from inbound delivery document (transaction VL33N). After core 7.0 upgrade, "vendor batch" is not copied from "batch" in inbound delivery document any more so that nothing appears in the vendor batch field in the lists.
(Change request)
Values in "vendor batch" in the Goods-in-order and Goods-in-plan lists are retrieved from "batch" in inbound delivery document ONLY IF "vendor batch" is blank in the inbound delivery document.
(Current design)
Batch is retrieved from LIPS-CHARG
Vendor batch is retrieved from LIPS-LICHN
(If there is no record in LIPS, blank will be printed out for both fields)
(After change)
Batch is retrieved from LIPS-CHARG
Vendor batch is retrieved from LIPS-LICHN only if LIPS-LICHN is not blank.
If LIPS-LICHN is blank, vendor batch is retrieved from LIPS-CHARG.
(If there is no record in LIPS, blank will be printed out for both fields. If both LIPS-CHARG and LIPS-LICHN are blank, blank will be printed out for both fields),
Following is the program:
REPORT zjpmrpu322 MESSAGE-ID zjpm001
NO STANDARD PAGE HEADING
LINE-COUNT 50
LINE-SIZE 255.
*& Development ID: PU_DD_322_LJP *
*& Report : ZJPMRPU322 *
*& The Purpose of this program is to print the Goods-in-order list *
*& and the Goods in plan list for raw materials, materials purchase *
*& etc at the Sasayama plant, Japan. *
*& Change Log: *
*& Init Who Date Text *
*& PV P V R S Varma 07-May-2003 Initial Version *
*& DU D.Usui 2004/02/26 CR No. 1432 *
*& DU D.Usui 2004/03/08 CR No. 1447 *
*& DU D.Usui 2004/05/06 CR No. 1591 *
Constants
CONSTANTS:
c_werks LIKE ekpo-werks VALUE 'JP01', "Plant code - Sasayama plant
c_id LIKE thead-tdid VALUE 'F02', "Text ID for Info record
c_object LIKE thead-tdobject VALUE 'EKPO',"Object of text for info rec
*c_zzjp_r1 LIKE marc-zzjp_re1 VALUE 'GMP', "Goods in plan- Domestic
*c_zzjp_r2 LIKE marc-zzjp_re1 VALUE 'GMPI', "Import sales order document
c_plus TYPE c VALUE '', "Holding '' sign
c_spras LIKE makt-spras VALUE 'J', "Language key Japan
*c_device(7) type c value 'PRINTER', "Device type
c_form(16) TYPE c VALUE 'ZJPMPU305', "Form name
c_ele_gmp(4) TYPE c VALUE 'GMP', "GMP Text element
c_ele_gmpi(4) TYPE c VALUE 'GMPI', "GMPI Text element
add begin CR1432
c_ele_bgmp(4) TYPE c VALUE 'BGMP', "BGMP
c_ele_bgmpi(5) TYPE c VALUE 'BGMPI', "BGMPI
add end CR1432
c_function(3) TYPE c VALUE 'SET', "Function
c_type(4) TYPE c VALUE 'BODY', "Window area in main window
c_win_head(7) TYPE c VALUE 'HEADING', "Heading window
c_win_shead(7) TYPE c VALUE 'SUBHEAD', "sub heading window
c_win_fot1(7) TYPE c VALUE 'FOOTER1', "Footer 1 window
c_win_main(4) TYPE c VALUE 'MAIN', "Main window
c_comd(8) TYPE c VALUE 'NEW-PAGE', "New-page command
c_zar TYPE ekko-bsart VALUE 'ZAR',
c_x TYPE c VALUE 'X', "Indicator for print options
c_f TYPE c VALUE 'F', "Indicator for Purchase Order
add begin CR1591
Deletion indicator in purchasing document
c_loekz(1) TYPE c VALUE 'L',
For ranges tables
c_sign_i(1) TYPE c VALUE 'I', "Sign(include)
c_op_eq(2) TYPE c VALUE 'EQ', "Option(=)
Confirmation category
c_ebtyp_ab(2) TYPE c VALUE 'AB', "Order acknowledgment
add end CR1591
c_la(2) TYPE c VALUE 'LA'. "Indicator for Inbound deliver
Database Tables
Vaiables / Internal tables *
Internal table to store PO information
Not used after CR1591
DATA: BEGIN OF t_purc OCCURS 0,
ebeln LIKE eket-ebeln, "Purchasing Document Number
ebelp LIKE eket-ebelp, "Item Number of Purchasing Document
eindt LIKE eket-eindt, "Item delivery date
menge LIKE eket-menge, "Scheduled quantity
charg LIKE eket-charg, "Batch number
matnr LIKE ekpo-matnr, "Material code
werks LIKE ekpo-werks, "Plant
meins LIKE ekpo-meins, "Unit of measure
lifnr LIKE ekko-lifnr, "Vendor number
END OF t_purc.
Internal table to store material description.
DATA: BEGIN OF t_makt OCCURS 0,
matnr LIKE makt-matnr, "Material code
maktx LIKE makt-maktx, "Material description
END OF t_makt.
Internal table for storage of final EKET data
DATA: BEGIN OF t_eket OCCURS 0,
ebeln LIKE eket-ebeln, "Purchasing Document Number
ebelp LIKE eket-ebelp, "Item Number of Purchasing Document
ebelp_ex(6) TYPE n, "Extended ebelp with length 6
eindt LIKE eket-eindt, "Item delivery date
menge LIKE eket-menge, "Scheduled quantity
dabmg LIKE ekes-dabmg, " Delivered Quantity
charg LIKE eket-charg, "Batch number
matnr LIKE ekpo-matnr, "Material code
werks LIKE ekpo-werks, "Plant
maktx LIKE makt-maktx, "Material Description-- jp check
etens LIKE ekes-etens, "Sequence Number
meins LIKE ekpo-meins, "Unit of measure
lifnr LIKE ekko-lifnr, "Vendor number
vbeln LIKE ekes-vbeln,
vbelp LIKE ekes-vbelp,
vpnam(40) TYPE c, "Vendor product name
END OF t_eket.
Internal table for extraction of data from EKES
Not used after CR1591
DATA: BEGIN OF t_ekes OCCURS 0,
ebeln LIKE ekes-ebeln, "Purchasing Document Number
ebelp LIKE ekes-ebelp, "Item Number of Purchasing Document
etens LIKE ekes-etens, "Sequence No
eindt LIKE ekes-eindt, "Item delivery date
menge LIKE ekes-menge, "Scheduled Quantity
dabmg LIKE ekes-dabmg, " delivered quantity
vbeln LIKE ekes-vbeln,
vbelp LIKE ekes-vbelp,
mark TYPE c,
END OF t_ekes.
Internal table for extraction of data from EKES
Not used after CR1591
DATA: BEGIN OF t_ekes_temp OCCURS 0,
ebeln LIKE ekes-ebeln, "Purchasing Document Number
ebelp LIKE ekes-ebelp, "Item Number of Purchasing Document
etens LIKE ekes-etens, "Sequence No
eindt LIKE ekes-eindt, "Item delivery date
menge LIKE ekes-menge, "Scheduled Quantity
END OF t_ekes_temp.
Internal table for storing data from MLGN table.
DATA: BEGIN OF t_mlgn OCCURS 0,
matnr LIKE mlgn-matnr, "material code
lhmg1 LIKE mlgn-lhmg1, "Standard pallet size
lhme1 LIKE mlgn-lhme1, "Unit of measure
lety1 LIKE mlgn-lety1, "tower
ltkze LIKE mlgn-ltkze, "Storage location
END OF t_mlgn.
Internal table for storing data from MARM table.
DATA: BEGIN OF t_marm OCCURS 0,
matnr LIKE marm-matnr, "material code
umrez LIKE marc-zzjp_cas_size, "Std package unit
meins LIKE ekpo-meins, "alternate unit
END OF t_marm.
Internal table for storing data from MARC table.
DATA: BEGIN OF t_marc OCCURS 0,
matnr LIKE marc-matnr, "Material code
zzjp_nyu_sop LIKE marc-zzjp_nyu_sop, "Product Std number
zzjp_dos_frm LIKE marc-zzjp_dos_frm, "Dosage form
zzjp_aprn LIKE marc-zzjp_aprn, "Apperance
zzjp_re1 LIKE marc-zzjp_re1, "Heading
END OF t_marc.
Internal table for storing data from lfa1 table.
DATA: BEGIN OF t_lfa1 OCCURS 0,
lifnr LIKE lfa1-lifnr, "Vendor code
name1 LIKE lfa1-name1, "Vendor name
END OF t_lfa1.
Internal table for Storing data from LIPS table.
DATA: BEGIN OF t_lips OCCURS 0,
vbeln LIKE lips-vbeln, "Delivery document no
posnr LIKE lips-posnr, "Item number for Delivery document
charg LIKE lips-charg, "Batch number
lichn LIKE lips-lichn, "Vendor Batch number
END OF t_lips.
Internal table for storing the final display data.
DATA: BEGIN OF t_display OCCURS 0,
g_checkbox type c, "check box for selection of records
ebeln LIKE ekes-ebeln, "Purchasing Document Number
ebelp LIKE ekes-ebelp, "Item Number of Purchasing Document
etens LIKE ekes-etens, "Sequence No
eindt LIKE eket-eindt, "Item delivery date
menge LIKE eket-menge, "Scheduled Quantity
vpnam(40) TYPE c, "Vendor product name
lifnr LIKE ekko-lifnr, "Vendor code
name1 LIKE lfa1-name1, "Vendor name
meins LIKE ekpo-meins, "Unit of measure
matnr LIKE ekpo-matnr, "Material Number
maktx LIKE makt-maktx, "Material Description-- jp check
charg LIKE lips-charg, "Batch number
lichn LIKE lips-lichn, "Vendor Batch number
lhmg1 LIKE mlgn-lhmg1, "standard pallet size
lhme1 LIKE mlgn-lhme1, "Unit of standard pallet
lety1 LIKE mlgn-lety1, "tower
ltkze LIKE mlgn-ltkze, "Storage location
umrez LIKE marc-zzjp_cas_size, "Std package unit
meinh LIKE ekpo-meins, "alternate unit
zzjp_nyu_sop LIKE marc-zzjp_nyu_sop, "Product Std number
zzjp_dos_frm LIKE marc-zzjp_dos_frm, "Dosage form
zzjp_aprn LIKE marc-zzjp_aprn, "Apperance
zzjp_re1 LIKE marc-zzjp_re1, "Heading
std_pac_no(13) TYPE n, "Std receipt package no
tot_std_pt(13) TYPE n, "Total no of std pallets
add begin CR1447
Add new field 'Goods-in-order','Item' for goods in plan list
vbeln like ekes-vbeln, "Goods-in-order
vbelp like ekes-vbelp, "Item
add end CR1447
END OF t_display.
Internal table for storing the final display data -Goods in order list
DATA: BEGIN OF t_display1 OCCURS 0,
ebeln LIKE ekes-ebeln, "Purchasing Document Number
ebelp LIKE ekes-ebelp, "Item Number of Purchasing Document
etens LIKE ekes-etens, "Sequence No
eindt LIKE eket-eindt, "Item delivery date
menge LIKE eket-menge, "Scheduled Quantity
vpnam(40) TYPE c, "Vendor product name
lifnr LIKE ekko-lifnr, "Vendor code
name1 LIKE lfa1-name1, "Vendor name
meins LIKE ekpo-meins, "Unit of measure
matnr LIKE ekpo-matnr, "Material Number
maktx LIKE makt-maktx, "Material Description-- jp check
charg LIKE lips-charg, "Batch number
lichn LIKE lips-lichn, "Vendor Batch number
lhmg1 LIKE mlgn-lhmg1, "standard pallet size
lhme1 LIKE mlgn-lhme1, "Unit of standard pallet
lety1 LIKE mlgn-lety1, "tower
ltkze LIKE mlgn-ltkze, "Storage location
umrez LIKE marc-zzjp_cas_size, "Std package unit
meinh LIKE ekpo-meins, "alternate unit
zzjp_nyu_sop LIKE marc-zzjp_nyu_sop, "Product Std number
zzjp_dos_frm LIKE marc-zzjp_dos_frm, "Dosage form
zzjp_aprn LIKE marc-zzjp_aprn, "Apperance
zzjp_re1 LIKE marc-zzjp_re1, "Heading
std_pac_no(13) TYPE n, "Std receipt package no
tot_std_pt(13) TYPE n, "Total no of std pallets
END OF t_display1.
Internal table for storing the final display data - Goods in plan list
DATA: BEGIN OF t_display2 OCCURS 0,
ebeln LIKE ekes-ebeln, "Purchasing Document Number
ebelp LIKE ekes-ebelp, "Item Number of Purchasing Document
etens LIKE ekes-etens, "Sequence No
eindt LIKE eket-eindt, "Item delivery date
menge LIKE eket-menge, "Scheduled Quantity
name1 LIKE lfa1-name1, "Vendor name
meins LIKE ekpo-meins, "Unit of measure
matnr LIKE ekpo-matnr, "Material Number
maktx LIKE makt-maktx, "Material Description-- jp check
charg LIKE lips-charg, "Batch number
lichn LIKE lips-lichn, "Vendor Batch number
lhmg1 LIKE mlgn-lhmg1, "standard pallet size
lety1 LIKE mlgn-lety1, "tower
ltkze LIKE mlgn-ltkze, "Storage location
tot_std_pt(13) TYPE n, "Total no of std pallets
add begin CR1447
Add new field 'Goods-in-order','Item' for goods in plan list
vbeln like ekes-vbeln, "Goods-in-order
vbelp like ekes-vbelp, "Item
add end CR1447
END OF t_display2.
add begin CR1591
RANGES: r_matnr FOR mara-matnr, "for p_matnr
r_ebeln FOR ekpo-ebeln. "for p_ebeln
add end CR1591
DATA: line TYPE i. " line number
DATA: g_checkbox TYPE c. "check box for selection of records
DATA: g_tab LIKE sy-index. "variable to hold index
DATA g_tabix LIKE sy-tabix. "holder for table index
Printing Options.
DATA: lw_pr_options LIKE itcpo.
*lw_pr_options-tddest = 'SA03'. " Print Device Name
lw_pr_options-tdpreview = 'X'. " Print Preview
lw_pr_options-tdnewid = 'X'. " New Request
lw_pr_options-tdlifetime = 2. " Retention in Spool
Selection Screen *
SELECTION-SCREEN BEGIN OF BLOCK blk1 WITH FRAME.
SELECT-OPTIONS:
s_date FOR sy-datum DEFAULT sy-datum. " Search period.
PARAMETERS:
p_matnr LIKE mara-matnr, " Material code
p_ebeln LIKE ekpo-ebeln. " Purchase Document No
SELECTION-SCREEN END OF BLOCK blk1.
Selection Screen Checks *
AT SELECTION-SCREEN.
IF ( s_date-low IS INITIAL ) AND
( p_matnr IS INITIAL ) AND
( p_ebeln IS INITIAL ).
MESSAGE e000 WITH 'Entry Must in atleast one of the Fields'(t00).
ENDIF.
IF ( NOT p_matnr IS INITIAL ) AND
( s_date IS INITIAL ) AND
( p_ebeln IS INITIAL ).
MESSAGE e000 WITH 'Date should also be Entered'(t01).
ENDIF.
del begin CR1591
This check is not found in original FS
IF ( NOT p_matnr IS INITIAL ) AND
( s_date IS INITIAL ) AND
( NOT p_ebeln IS INITIAL ).
MESSAGE e000 WITH 'Date should also be Entered'(t01).
ENDIF.
del end CR1591
Validations for Data selection *
del begin CR1591
Waste check
IF ( NOT s_date IS INITIAL ) AND
( p_matnr IS INITIAL ) AND
( p_ebeln IS INITIAL ).
PERFORM f_check_date_in_eket.
ENDIF.
IF ( NOT s_date IS INITIAL ) AND
( NOT p_matnr IS INITIAL ) AND
( p_ebeln IS INITIAL ).
PERFORM f_check_matnr_in_plant.
PERFORM f_check_matnr_in_ekpo.
PERFORM f_check_date_in_eket.
PERFORM f_check_matnr_in_plant.
PERFORM f_check_matnr_in_ekpo.
ENDIF.
IF ( NOT s_date IS INITIAL ) AND
( NOT p_matnr IS INITIAL ) AND
( NOT p_ebeln IS INITIAL ).
PERFORM f_check_matnr_in_plant.
PERFORM f_check_matnr_in_ekpo.
PERFORM f_check_date_in_eket.
PERFORM f_check_ebeln_in_ekpo.
PERFORM f_check_werks_in_ekpo.
ENDIF.
IF ( NOT p_ebeln IS INITIAL ) AND
( NOT s_date IS INITIAL ) AND
( p_matnr IS INITIAL ).
PERFORM f_check_date_in_eket.
PERFORM f_check_ebeln_in_ekpo.
PERFORM f_check_werks_in_ekpo.
ENDIF.
IF ( NOT p_ebeln IS INITIAL ) AND
( s_date IS INITIAL ) AND
( p_matnr IS INITIAL ).
PERFORM f_check_ebeln_in_ekpo.
PERFORM f_check_werks_in_ekpo.
ENDIF.
del end CR1591
Data selection from Tables *
START-OF-SELECTION.
SET PF-STATUS 'SELECT'.
add begin CR1591
Set ranges tables
PERFORM set_ranges.
add end CR1591
mod begin CR1591
**Selection of PO data from EKET into internal table t_purc.
PERFORM f_select_eket.
**Selection of corresponding PO data for EKET from EKES into t_ekes.
PERFORM f_select_ekes.
**Selection of material desc from MAKT table into T_makt.
PERFORM f_select_makt.
**Copy the contents of t_purc and t_makt into t_eket table.
PERFORM f_move_eket.
**Replace the corresponding entries of t_eket with t_ekes.
PERFORM f_update_eket.
Selection of PO data from EKET into internal table T_EKET.
PERFORM f_select_eket2.
Selection of corresponding PO data from EKES appending to T_EKET.
PERFORM f_select_ekes2.
Selection of material desc from MAKT table into T_MAKT.
PERFORM f_select_makt2.
mod end CR1591
*Selection of vendor product name.
PERFORM f_select_vpnam.
del begin CR1591
No need
**copy t_eket-ebelp into temporary variable.
PERFORM f_copy_ebelp.
del end CR1591
*selection of data from MLGN table into t_mlgn internal table
PERFORM f_select_mlgn.
*selection of data from marm table into t_marm internal table
PERFORM f_select_marm.
*selection of data from marc table into t_marc internal table
PERFORM f_select_marc.
*selection of data from lfa1 table into t_lfa1 internal table
PERFORM f_select_lfa1.
*Selection of data from LIPS table into t_lips internal table
PERFORM f_select_lips.
del begin CR1591
Don't display list screen when no data exists
*END-OF-SELECTION.
del end CR1591
*lines = sy-linno - 1.
*Collection of data into the final display internal table t_Display
PERFORM f_collect_final.
*Display the contents of t_display as a simple List
PERFORM f_list_display.
AT USER-COMMAND.
PERFORM f_select_layout.
INCLUDE zjpmipu315.
INCLUDE zjpmipu316.
*& Form f_check_MATNR_in_plant
This Routine is to check if the the selected material code is
available in the plant 'JP01'.
FORM f_check_matnr_in_plant.
DATA: l_matnr LIKE mara-matnr.
SELECT matnr UP TO 1 ROWS FROM marc
INTO l_matnr
WHERE
matnr = p_matnr AND
werks = c_werks.
ENDSELECT.
IF l_matnr IS INITIAL.
MESSAGE e000 WITH
'The material is not available in '(t02) c_werks 'plant'(t20).
ENDIF.
ENDFORM. " f_check_MATNR_in_plant
*& Form f_check_EBELN_in_EKPO
This Routine is to check if the Purchase order number selected
is existing or not and if it exists, check if it is related to
the plant 'JP01'.
FORM f_check_ebeln_in_ekpo.
DATA: l_ebeln LIKE ekpo-ebeln.
SELECT ebeln UP TO 1 ROWS FROM ekpo
INTO l_ebeln
WHERE
ebeln = p_ebeln AND
werks = c_werks.
ENDSELECT.
IF l_ebeln IS INITIAL.
MESSAGE e000 WITH
'PO not available or not related to '(t03) c_werks 'plant'(t21).
ENDIF.
ENDFORM. " f_check_EBELN_in_EKPO
*& Form f_check_matnr_in_ekko
This routine is to check if any PO exist for the selected
Material code.
FORM f_check_matnr_in_ekpo.
DATA: l_matnr LIKE ekpo-matnr.
SELECT matnr UP TO 1 ROWS FROM ekpo
INTO l_matnr
WHERE
matnr = p_matnr.
ENDSELECT.
IF l_matnr IS INITIAL.
MESSAGE e000 WITH
'PO does not exist for the material no'(t04) p_matnr.
ENDIF.
ENDFORM. " f_check_matnr_in_ekpo
*& Form f_check_date_in_eket
This routine is to check if any purchase order exists
with the selected
FORM f_check_date_in_eket.
DATA: l_eindt LIKE eket-eindt.
SELECT eindt UP TO 1 ROWS FROM eket
INTO l_eindt
WHERE
eindt IN s_date.
ENDSELECT.
IF l_eindt IS INITIAL.
MESSAGE e000 WITH
'No PO exist with the selected delivery date '(t05).
ENDIF.
ENDFORM. " f_check_date_in_eket
*& Form f_check_werks_in_ekpo
This Routine is to check if the selected purchase order
is associated with the plant JP01
FORM f_check_werks_in_ekpo.
DATA: l_ebeln LIKE ekpo-ebeln.
SELECT ebeln UP TO 1 ROWS FROM ekpo
INTO l_ebeln
WHERE
werks = c_werks.
ENDSELECT.
IF l_ebeln IS INITIAL.
MESSAGE e000 WITH
'The selected P0 is not relevant to '(t06) c_werks 'plant'(t22).
ENDIF.
ENDFORM. " f_check_werks_in_ekpo
*& Form f_select_eket
Routine to collect data from EKET, EKPO, MAKT, EKKO tables
using inner join and store the data into internal table
t_PURC. The data selection is based on the selection screen's
input.
FORM f_select_eket.
IF ( NOT s_date-low IS INITIAL ) AND
( p_matnr IS INITIAL ) AND
( p_ebeln IS INITIAL ).
SELECT
eket~ebeln
eket~ebelp
eket~eindt
eket~menge
eket~charg
ekpo~matnr
ekpo~werks
ekpo~meins
ekko~lifnr
INTO TABLE t_purc
FROM
( ( eket INNER JOIN ekko ON
eketebeln = ekkoebeln ) INNER JOIN ekpo ON
eketebelp = ekpoebelp AND
ekpoebeln = ekkoebeln )
WHERE
eket~eindt IN s_date AND
ekpo~werks = c_werks AND
ekpo~elikz NE c_x AND
ekko~bstyp EQ c_f AND
ekko~bsart NE c_zar.
ELSEIF ( NOT s_date-low IS INITIAL ) AND
( NOT p_matnr IS INITIAL ) AND
( p_ebeln IS INITIAL ).
SELECT
eket~ebeln
eket~ebelp
eket~eindt
eket~menge
eket~charg
ekpo~matnr
ekpo~werks
ekpo~meins
ekko~lifnr
INTO TABLE t_purc
FROM
( ( eket INNER JOIN ekko ON
eketebeln = ekkoebeln ) INNER JOIN ekpo ON
eketebelp = ekpoebelp AND
ekpoebeln = ekkoebeln )
WHERE
eket~eindt IN s_date AND
ekpo~matnr = p_matnr AND
ekpo~werks = c_werks AND
ekpo~elikz NE c_x AND
ekko~bstyp EQ c_f AND
ekko~bsart NE c_zar.
ELSEIF ( NOT s_date-low IS INITIAL ) AND
( NOT p_matnr IS INITIAL ) AND
( NOT p_ebeln IS INITIAL ).
SELECT
eket~ebeln
eket~ebelp
eket~eindt
eket~menge
eket~charg
ekpo~matnr
ekpo~werks
ekpo~meins
ekko~lifnr
INTO TABLE t_purc
FROM
( ( eket INNER JOIN ekko ON
eketebeln = ekkoebeln ) INNER JOIN ekpo ON
eketebelp = ekpoebelp AND
ekpoebeln = ekkoebeln )
WHERE
eket~eindt IN s_date AND
ekpo~matnr = p_matnr AND
ekpo~ebeln = p_ebeln AND
ekpo~werks = c_werks AND
ekpo~elikz NE c_x AND
ekko~bstyp EQ c_f AND
ekko~bsart NE c_zar.
ELSEIF ( s_date-low IS INITIAL ) AND
( p_matnr IS INITIAL ) AND
( NOT p_ebeln IS INITIAL ).
SELECT
eket~ebeln
eket~ebelp
eket~eindt
eket~menge
eket~charg
ekpo~matnr
ekpo~werks
ekpo~meins
ekko~lifnr
INTO TABLE t_purc
FROM
( ( eket INNER JOIN ekko ON
eketebeln = ekkoebeln ) INNER JOIN ekpo ON
eketebelp = ekpoebelp AND
ekpoebeln = ekkoebeln )
WHERE
ekpo~ebeln = p_ebeln AND
ekpo~werks = c_werks AND
ekpo~elikz NE c_x AND
ekko~bstyp EQ c_f AND
ekko~bsart NE c_zar.
ELSEIF ( NOT s_date-low IS INITIAL ) AND
( p_matnr IS INITIAL ) AND
( NOT p_ebeln IS INITIAL ).
SELECT
eket~ebeln
eket~ebelp
eket~eindt
eket~menge
eket~charg
ekpo~matnr
ekpo~werks
ekpo~meins
ekko~lifnr
INTO TABLE t_purc
FROM
( ( eket INNER JOIN ekko ON
eketebeln = ekkoebeln ) INNER JOIN ekpo ON
eketebelp = ekpoebelp AND
ekpoebeln = ekkoebeln )
WHERE
eket~eindt IN s_date AND
ekpo~ebeln = p_ebeln AND
ekpo~werks = c_werks AND
ekpo~elikz NE c_x AND
ekko~bstyp EQ c_f AND
ekko~bsart NE c_zar.
ENDIF.
IF sy-subrc <> 0.
MESSAGE s000 WITH 'Data not found'(t07).
LEAVE LIST-PROCESSING.
ELSE.
SORT t_purc.
ENDIF.
ENDFORM. " f_select_eket
*& Form f_select_makt
Routine to select the material description for all the
materials present in T_purc table
FORM f_select_makt.
DATA: l_t_makt(4) TYPE c VALUE 'MAKT'.
SELECT
matnr
maktx
FROM
makt
INTO TABLE t_makt
FOR ALL ENTRIES IN t_purc
WHERE
matnr = t_purc-matnr AND
spras = c_spras.
IF sy-subrc <> 0.
MESSAGE s000 WITH
'Relevant data not found in'(t09) l_t_makt 'table'(t23).
ELSE.
SORT t_makt.
ENDIF.
ENDFORM. " f_select_makt
*& Form f_move_eket
Routine to join data in T_PURC and T_MAKT tables into
internal table T_MAKT.
FORM f_move_eket.
LOOP AT t_purc.
t_eket-ebeln = t_purc-ebeln.
t_eket-ebelp = t_purc-ebelp.
t_eket-eindt = t_purc-eindt.
t_eket-menge = t_purc-menge.
t_eket-charg = t_purc-charg.
t_eket-matnr = t_purc-matnr.
t_eket-werks = t_purc-werks.
t_eket-meins = t_purc-meins.
t_eket-lifnr = t_purc-lifnr.
READ TABLE t_makt WITH KEY matnr = t_purc-matnr
BINARY SEARCH.
IF sy-subrc = 0.
t_eket-maktx = t_makt-maktx.
ENDIF.
APPEND t_eket.
CLEAR t_eket.
ENDLOOP.
ENDFORM. " f_move_eket
*& Form f_select_ekes
Routine to select EKES data for all corresponding entries
of T_EKET.
FORM f_select_ekes.
DATA: l_tabix TYPE i.
IF NOT s_date IS INITIAL.
SELECT
ebeln
ebelp
etens
eindt
menge
INTO TABLE t_ekes
FROM
ekes
WHERE
eindt IN s_date.
ELSE.
DESCRIBE TABLE t_purc LINES l_tabix.
IF l_tabix GT 0.
SELECT
ebeln
ebelp
etens
eindt
menge
dabmg
vbeln
vbelp
FROM
ekes
INTO TABLE t_ekes
FOR ALL ENTRIES IN t_eket
FOR ALL ENTRIES IN t_purc
WHERE
ebeln = t_purc-ebeln AND
ebelp = t_purc-ebelp AND
eindt IN s_date.
AND ebeln eq p_ebeln.
and matnr in p_matnr.
ENDIF.
CLEAR l_tabix.
IF NOT s_date IS INITIAL AND NOT p_ebeln IS INITIAL.
SELECT
ekes~ebeln
ekes~ebelp
ekes~etens
ekes~eindt
ekes~menge
ekes~dabmg
APPENDING TABLE t_ekes
FROM ekes
WHERE
eindt IN s_date AND
ebeln EQ p_ebeln AND
ebtyp EQ c_la.
ELSEIF NOT s_date IS INITIAL AND p_ebeln IS INITIAL.
SELECT
ekes~ebeln
ekes~ebelp
ekes~etens
ekes~eindt
ekes~menge
ekes~dabmg
APPENDING TABLE t_ekes
FROM ekes
WHERE
eindt IN s_date AND
ebeln EQ p_ebeln AND
ebtyp EQ c_la.
ELSEIF s_date IS INITIAL AND NOT p_ebeln IS INITIAL.
SELECT
ekes~ebeln
ekes~ebelp
ekes~etens
ekes~eindt
ekes~menge
ekes~dabmg
APPENDING TABLE t_ekes
FROM ekes
WHERE
eindt IN s_date AND
ebeln EQ p_ebeln AND
ebtyp EQ c_la.
ENDIF.
IF sy-subrc = 0.
SORT t_ekes.
ENDIF.
IF NOT t_ekes[] IS INITIAL.
t_ekes_temp[] = t_ekes[].
SORT t_ekes_temp BY ebeln ebelp.
DELETE ADJACENT DUPLICATES FROM t_ekes_temp COMPARING ebeln ebelp.
LOOP AT t_ekes_temp.
READ TABLE t_purc WITH KEY ebeln = t_ekes_temp-ebeln
ebelp = t_ekes_temp-ebelp.
IF sy-subrc NE 0.
CLEAR t_purc.
SELECT SINGLE
eket~ebeln
eket~ebelp
eket~eindt
eket~menge
eket~charg
ekpo~matnr
ekpo~werks
ekpo~meins
ekko~lifnr
INTO CORRESPONDING FIELDS OF t_purc
FROM
( ( eket INNER JOIN ekko ON
eketebeln = ekkoebeln ) INNER JOIN ekpo ON
eketebelp = ekpoebelp AND
ekpoebeln = ekkoebeln )
WHERE
eket~ebeln = t_ekes_temp-ebeln
AND eket~ebelp = t_ekes_temp-ebelp
AND ekpo~elikz NE c_x
AND ekko~bstyp EQ c_f
AND ekko~bsart NE c_zar.
IF sy-subrc EQ 0.
APPEND t_purc.
CLEAR t_purc.
ENDIF.
ENDIF.
ENDLOOP.
ENDIF.
REFRESH: t_ekes_temp, t_ekes.
CLEAR: t_ekes_temp, t_ekes.
Once the header is filled up get the details from EKES
SELECT ebeln ebelp etens eindt menge dabmg vbeln vbelp
INTO TABLE t_ekes
FROM ekes
FOR ALL ENTRIES IN t_purc
WHERE ebeln EQ t_purc-ebeln.
Mark the entries as 'X' which falls in the date range
LOOP AT t_ekes.
IF t_ekes-eindt IN s_date.
t_ekes-mark = 'X'.
MODIFY t_ekes INDEX sy-tabix TRANSPORTING mark.
ENDIF.
ENDLOOP.
SORT t_ekes BY ebeln ebelp ASCENDING mark DESCENDING.
Delete the entries from eket if no entries in EKES falls in the period
LOOP AT t_purc.
l_tabix = sy-tabix.
READ TABLE t_ekes WITH KEY ebeln = t_purc-ebeln
ebelp = t_purc-ebelp.
IF sy-subrc EQ 0.
IF t_ekes-mark NE 'X'.
DELETE t_purc INDEX l_tabix.
ENDIF.
ENDIF.
ENDLOOP.
delete the entries from EKES which do not fall in the specified period
DELETE t_ekes WHERE mark NE 'X'.
ENDFORM. " f_select_ekes
*& Form f_update_eket
Routine to substitute relevant t_eket entries with that of
t_ekes entries.It does not modify the remaining entries for
for which the corresponding values in t_ekes doesnot exist.
FORM f_update_eket.
DATA: BEGIN OF lt_temp_eket OCCURS 0,
ebeln LIKE eket-ebeln, "Purchasing Document Number
ebelp LIKE eket-ebelp, "Item Number of Purchasing Document
eindt LIKE eket-eindt, "Item delivery date
menge LIKE eket-menge, "Scheduled quantity
dabmg LIKE ekes-dabmg, " Delivered quantity
matnr LIKE ekpo-matnr, "Material code
maktx LIKE makt-maktx, "Material Description-- jp check
etens LIKE ekes-etens, "Sequence Number
meins LIKE ekpo-meins, "Unit of measure
lifnr LIKE ekko-lifnr, "Vendor number
charg LIKE eket-charg, " Batch number Added by PD 08/08/03
vbeln LIKE ekes-vbeln,
vbelp LIKE ekes-vbelp,
END OF lt_temp_eket,
l_menge LIKE ekes-menge.
LOOP AT t_eket.
LOOP AT t_ekes WHERE ebeln = t_eket-ebeln
AND ebelp = t_eket-ebelp.
Added by PD 08/08/03
MOVE t_eket-charg TO lt_temp_eket-charg.
addition ends
MOVE t_eket-ebeln TO lt_temp_eket-ebeln.
MOVE t_eket-ebelp TO lt_temp_eket-ebelp.
MOVE t_eket-meins TO lt_temp_eket-meins.
CLEAR l_menge.
l_menge = t_ekes-menge - t_ekes-dabmg.
IF l_menge LE 0.
CONTINUE.
ELSE.
MOVE l_menge TO lt_temp_eket-menge.
ENDIF.
MOVE t_ekes-eindt TO lt_temp_eket-eindt.
MOVE t_ekes-etens TO lt_temp_eket-etens.
MOVE t_eket-lifnr TO lt_temp_eket-lifnr.
MOVE t_eket-maktx TO lt_temp_eket-maktx.
MOVE t_eket-matnr TO lt_temp_eket-matnr.
MOVE t_ekes-vbeln TO lt_temp_eket-vbeln.
MOVE t_ekes-vbelp TO lt_temp_eket-vbelp.
APPEND lt_temp_eket.
CLEAR lt_temp_eket.
CLEAR t_ekes.
ENDLOOP.
IF sy-subrc NE 0.
Added by PD 08/08/03
MOVE t_eket-charg TO lt_temp_eket-charg.
addition ends
MOVE t_eket-ebelnDear
Problem No 1 : we are working in a process industries with three plants each of them have three order type. we have define MRP group in "OPPR" then assign each MRP group to Orde types in "OPPE". Now the problem is whn i convert plan order in process order for any material systme automaticaly pick the order type PIi01.
Answer :
1.Please check the OPPR -Plant and MRP group -Select Order Type Button -Check what Order Type you have assinged here ( PI01( May be the default Process Order Type )
2.If you are maintaing MRP group ( 0001 or 0002) , did you asisng the same in MRP1 view ?? because
3.Did you maintain the similar Order type in OPKP -Define Production Scheduling Profile ? -This has highest priority .
4.Did you maintain correct order type in OPJH-Maintain Order Type ??
Refer the expert comments on the same issue : Strategy group to define production order type
Problem No 2: 2nd Problem is system system is not creating plan order for prrevios dates. say i enter PIR for month of november from first november to 30th november and run MRP on 29th the sytem create plan order on 30th of november with exception message 30.
Answer : You can plan the order in back dated , if you maitain Satrt date in the Past optiuon in OPU3/OPU5-Define Scheduling parameters .Goto OPU3 -Select the Order Type -Double click -Maintain 90-60 days in the Start Date in the past in Scheduling Control and Details scheduling tab .
Hope it helps
regards
JH -
My macbook pro hard drive went bad and i bought a new one and installed it. Now i have the old corrupted hard drive in my hand and i am looking to recover my files from it, any suggestions please? too bad i never backed them up.
After you have installed the OSX on the new HDD in your MBP, install the old HDD in an enclosure and connect it to your MBP via USB. Then try to drag and drop your data to the new HDD.
If this proves unsuccessful, you may look for data recovery software on the Internet. There will be free trails to see if it will work or not. If the trial suggests that it will work, then you will have to purchase the software.
The last resort is a professional data recovery service that will offer NO guarantees and charge a lot of money.
As you now can appreciate, backups eliminate such predicaments.
Ciao. -
I have an iMac model 4,1 running OSX 10.6.8. The CD/DVD drive went bad and I have replaced it. However I can not get disks to eject. I have asked about this before and tried all all the suggestions I have received but I can not eject.
Yesterday I opened up the iMac and reinstalled the drive to make sure that it was not an alignment problem. I still can not eject. When I try to eject the drive makes noises like it is ejecting but the disk does not come out.
How do I solve this problem?Hi again Hal
Link to your other thread > The slot loading CD/DVD drive in my...: Apple Support Communities
You have also tried resetting the PRAM as I suggestion in your other thread...?
See resetting the PRAM > About NVRAM and PRAM
1. Shut down the computer.
2. Locate the following keys on the keyboard: Command, Option, P, and R. You will need to hold these keys down simultaneously in step 4.
3. Turn on the computer.
4. Press and hold the Command-Option-P-R keys. You must press this key combination before the gray screen appears.
5. Hold the keys down until the computer restarts and you hear the startup sound for the second time.
6. Release the keys. -
Good afternoon ladies and gentlemen!
My question concerns the impossibility to open RAW-files directly from the program Adobe Bridge. At the moment when you open a RAW-file from Adobe Bridge by double-clicking, RAW-file is opened only in Photoshop. In the settings Adobe Bridge - in "open RAW-files by double-clicking in Adobe Camera Raw» box is checked. When you try any changes in the settings Adobe Bridge system displays a message:
Bridge's parent application is not active. Bridge requires that a qualifying product has been launched at least once to enable this feature.
The entire line of Adobe products on my computer updated to the latest updates. Previously, a family of products Adobe Photoshop on your computer is not set. Computer - PC, Windows 7 Enterprises.<moved from Adobe Creative Cloud to Bridge General Discussion>
-
I have a 32gb iphone 5 the wifi signal is bad and the time doesnt work can someone help i did everything thats in my hands and its still not working
Do you experience the same issue on other WiFi networks?
Do any other iOS devices experience the same issue on your network?
Make sure you follow all steps provided in the article below:
iOS: Troubleshooting Wi-Fi networks and connections -
When I download Microsoft word documents (if have word 2007), I have somehow changed the settings and it downloads them in wordpad, and the format is very bad and I can't read a lot of the document. How do I change the default setting back to using Microsoft Word 2007 to open these documents?
== This happened ==
Every time Firefox opened
== about a few weeks ago - I had tried to open some docuuments saved on a mac, my PC (which runs Windows 7), used word pad to open these, and this seems to have changed the default settings somehow.See this:
[http://support.mozilla.com/en-US/kb/Managing+file+types] -
Why is the support so bad and expensive?
Putting in my serial number of a product that is now useless tells me I'm not covered by the support so I have to pay £25 to have someone call me.
When I put in all my details so I can phone Apple myself I then get given a premium rate number to phone and when I get through I start getting asked the same questiuons I answered online ( to get my case number ) so the call is going to end up costing more than it should. The case number is supposed to make the call quicker.
Why is help so expensive here?
Why can't I just email support?John Galt, the poster already did that as he said in this discussion. He said:
I'm sure with the millions of dollars Apple make every day they can pay staff for support. Instead of that they create a forum where people can do their work for them for free.
I've posted details about my problem herehttps://discussions.apple.com/message/25581520#25581520
John Galt wrote:
Post details of your own problem by starting your own Discussion, not by replying to someone else's. That is the best way to exploit the free resources of this free website.
Otherwise, your only question "why is the support so bad and expensive" stands. It has been answered in this Discussion, which will effectively close it for those willing to help.
Maybe you are looking for
-
How many times can I use Acrobat Pro on my three compters -- the desk top, lap top, the net book. Do I have to make multiple purchases?
-
Open link from portal favorites
Hi all, When we add some KM Navigation iView to portal favorites and try to open it from portal favorites link it opened with wrong layoutset (not the same layoutset that declarated in original iView). How can we change it? Thanks, Ola
-
Make offline clips problem with xsan
Hi, I have a problem with Final cut pro and Xsan. Mac Pro with Leopard Final cut pro 6 Xsan 2 We have 7 Mac pro and Xsan 2. When we make offline the clips in final cut pro and select delete from disk, sometimes the QT files are deleted from Xsan volu
-
The IPAD (IOS 8.02) Internet connection problems
I've updated the IOS 8.02 on my IPAD but I have problems to connect to the internet via Wi Fi. When will it definitely solve? It is not enough to apologize, they have to fix it now and be more professional.
-
ok i cant figure out how to sync only certain tv shows from the itunes onto the ipad it seems to either be syncing all or none. i want to sync only checked tv shows how do i set this to happen please help