The Java startup framework must be updated - SAP JVM 4

Dear All,
While execution of switch from JDK to SAP JVM 4.1 on java instance we get the message "The Java startup framework must be updated in order to use SAP JVM 4"
Please help or guide for further steps
Regards,
Ajay

Hi Ajay,
Hope you are doing good.
If the issue persists, kindly update the kernel to the latest level as this will update the native libraries which the JVM needs. This is the next step in these kind of cases.
The below links will help you if there are any queries with the
kernel update procedure.
If you wish to do a Manual Kernel Upgrade:
<http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/70d8838d-cb8f-2c10-7ab8-d1504670fbb8>
Kernel upgrade using JSPM:
<http://www.sdn.sap.com/irj/scn/weblogs?blog=/pub/wlg/11219>
and
SAP Note No. 19466: Downloading SAP kernel patches
Thank you and have a nice day :).
Kind Regards,
Hemanth
SAP AGS

Similar Messages

SAPinst error:- The java class is not found: com.sap.engine.offline.Offlin

Hi,
I am in the midst of Installing SOLMAN on RHEL5-ORACLE
Have installed IBM JDK version 1.4.2_10
During the CREATE SECURE STORE PHASE I am getting the following error:
sapinst_dev log file O/P
WARNING[E] 2008-06-09 18:04:43.225
 CJSlibModule::writeError_impl()
CJS-30050 Cannot create the secure store. SOLUTION: See output of log file SecureStoreCreate.log:
The java class is not found: com.sap.engine.offline.OfflineToolStart.
TRACE 2008-06-09 18:04:43.225 [iaxxejsbas.hpp:483]
 EJS_Base::dispatchFunctionCall()
JS Callback has thrown unknown exception. Rethrowing.
TRACE 2008-06-09 18:04:43.243 [syuxctask.cpp:1382]
 CSyTaskImpl::start(bool)
A child process has been started. Pid = 2529
TRACE 2008-06-09 18:04:43.281 [syuxctask.cpp:1382]
 CSyTaskImpl::start(bool)
A child process has been started. Pid = 2530
ERROR 2008-06-09 18:04:43.310 [sixxcstepexecute.cpp:951]
FCO-00011 The step createSecureStore with step key |NW_Onehost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|2|0|NW_CreateDBandLoad|ind|ind|ind|ind|10|0|NW_SecureStore|ind|ind|ind|ind|8|0|createSecureStore was executed with status ERROR .
TRACE 2008-06-09 18:04:43.317 [iaxxgenimp.cpp:752]
 CGuiEngineImp::showMessageBox
<html> <head> </head> <body> An error occurred while processing service SAP Solution Manager 4.0 Support Release 4 > SAP Systems > Oracle > Central System > Central System. You may now <ul> <li> choose Retry to repeat the current step. </li> <li> choose View Log to get more information about the error. </li> <li> stop the task and continue with it later. </li> </ul> Log files are written to /tmp/sapinst_instdir/SOLMAN/SYSTEM/ORA/CENTRAL/AS. </body></html>
TRACE 2008-06-09 18:04:43.317 [iaxxgenimp.cpp:1255]
 CGuiEngineImp::acceptAnswerForBlockingRequest
Waiting for an answer from GUI
SAPINST.LOG file O/P
WARNING 2008-06-09 18:04:43.224
Execution of the command "/opt/IBMJava2-amd64-142/bin/java -classpath /tmp/sapinst_instdir/SOLMAN/SYSTEM/ORA/CENTRAL/AS/install/sharedlib/launcher.jar -Xmx256m com.sap.engine.offline.OfflineToolStart com.sap.security.core.server.secstorefs.SecStoreFS /tmp/sapinst_instdir/SOLMAN/SYSTEM/ORA/CENTRAL/AS/install/lib:/tmp/sapinst_instdir/SOLMAN/SYSTEM/ORA/CENTRAL/AS/install/sharedlib/exception.jar:/tmp/sapinst_instdir/SOLMAN/SYSTEM/ORA/CENTRAL/AS/install/sharedlib/logging.jar:/tmp/sapinst_instdir/SOLMAN/SYSTEM/ORA/CENTRAL/AS/install/sharedlib/tc_sec_secstorefs.jar create -s SMD -f /sapmnt/SMD/global/security/data/SecStore.properties -k /sapmnt/SMD/global/security/data/SecStore.key -enc -p XXXXXX" finished with return code 1. Output:
The java class is not found: com.sap.engine.offline.OfflineToolStart
WARNING[E] 2008-06-09 18:04:43.225
CJS-30050 Cannot create the secure store. SOLUTION: See output of log file SecureStoreCreate.log:
The java class is not found: com.sap.engine.offline.OfflineToolStart.
ERROR 2008-06-09 18:04:43.310
FCO-00011 The step createSecureStore with step key |NW_Onehost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|2|0|NW_CreateDBandLoad|ind|ind|ind|ind|10|0|NW_SecureStore|ind|ind|ind|ind|8|0|createSecureStore was executed with status ERROR .
SecurStoreCreate log O/P
The java class is not found: com.sap.engine.offline.OfflineToolStart
Pls suggest how to resolve this issue
Pls help to resolve this issue
Rgds,
Abhijeet

Hi All,
I Found the Solution.
The SAPinst tool was somehow not able to extracte the
J2EEINSTALL.SAR files from the JAVA Components DVD.
So I manually extracted the the file in the temporary install folder which the SAPinst creates in the /tmp filesystem (on LINUX by deafult) during the installation process.
The following command is used (I used this on Red Hat LINUX 5.2) to extract the J2EEINSTALL.SAR file:-
/sapmnt/SMD/exe/SAPCAR
-xvf /dump/SR4_Java_Components/D51033521/DATA_UNITS/JAVA_J2EE_OSINDEP_J2EE_INST/J2EEINSTALL.SAR
/sapmnt/SMD/exe/SAPCAR -->source directory of the file SAPCAR which is used to extarct CAR / SAR files on UNIX
/dump/SR4_Java_Components/D51033521/DATA_UNITS/JAVA_J2EE_OSINDEP_J2EE_INST/J2EEINSTALL.SAR--> destination dir. where the SAPinst tool will read and execute the file.
Rgds,
Abhijeet K

The java class is not found: com.sap.inst.migmon.exp. "During export "

Hello all,
I am trying to run export of PI system (ABAP+JAVA) uisng inst master NWSR3
I am hit with an issue before the export_ABAP starts . the following are the error lines
java version "1.4.2"
Java(TM) 2 Runtime Environment, Standard Edition (build 2.3)
IBM J9 VM (build 2.3, J2RE 1.4.2 IBM J9 2.3 AIX ppc64-64 j9ap64142-20070708 (JIT enabled)
J9VM - 20070530_12820_BHdSMr
JIT - 20070529_1824_r8
GC - 20070328_AA)
The java class is not found: com.sap.inst.migmon.exp.ExportMonitor
Please share if there are any possible solutions to overcome this error & make export run smoother
thanks & regards,
rahul

Hello,
Please check the JVM-settings as per note
1024539 (including the environment-variables and APARS).
For some reason the 'migmon.jar' - file can no longer
be found in your installation directory
It might be sufficient to copy the archive 'MIGMON.SAR' from your
master-cd (subdirectory IM_AIX_PPC64/COMMON/INSTALL) to your
installation directory and extract the archive there by 'SAPCAR -xvf
If the problem persists
apply the latest patch as per note
784118 System Copy Java Tools
regards,
John Feely

Is the Java Media Framework still supported by Sun or not ??

Hello my name is Michael.
I have questions about the JFM, are there any person who can response it, please post it.
I don't know if the technology is up to date if there is no release or bug fix since 2003.
Please tell me something about the plan from Sun about the Java Media Framework.
Is there any substitute java framework to work with ??
Thank you for your benefit !!
Michael

Doug,
Your iPod should work with no issues on 10.4.11 and iTunes 8+.
When the iPod "locks up" do you hear any clicking noises? Your symptoms sound like the hard drive is having hardware issues.
Here's a trick I used to use to fix the older iPods. It involves opening up the iPod, so if you don't feel comfortable, you might want to go to someone who does.
Take a blade from a box cutter and gently move it along where the plastic meets the metal on the iPod. Use the blade to pry open the iPod from the metal case for the back.
Once you get the iPod out, look towards the bottom of the iPod, and you should see the hard drive with a wide cable attached to it. Take that cable out of the hard drive (gently). Find a Bic pen cap (or something similar) and push it in between the two rows of pins on the cable. Try to make sure the pins are spread apart evenly and all pointing directly out. Once you get that in place, firmly push the cable back into the hard drive and gently put the iPod back together.
You may then want to restore just to be safe, and try loading your music again. I've used this trick on many old iPods to bring another couple of years of life into them. (sometimes this cable comes loose, causing the issues you're describing)
Justin

Replace the JCE Unlimited Strength Jurisdiction Policy files - SAP JVM 5

Hi Experts,
I had a NetWeaver 7.1 system with SAP JVM 5. I tried to run a cryptography software on the system, but the current JCE Unlimited Strength Jurisdiction Policy files of the JVM limited encryption algorithms and key lengths.
I downloaded the jce_policy-1_5_0.zip file from the Sun website, unzipped it, replaced the old policy files (sapjvm_5/jre/lib/security/local_policy.jar and sapjvm_5/jre/lib/security/US_export_policy.jar) with the new ones, then restarted the server. But, after the server was restarted, the new policy files were deleted and the old ones were restored.
Could you tell me what should I do to apply the new policy files?
Thanks in advance.
Victor

Issue Resolved..with help of OSS note :739043
EP 6.0 SP15.... I had same issue for Portal prodution:
I had copied new files (local_policy.jar and US_export_policy.jar) in directory /opt/java1.4/jre/lib/security
Jun 16 2003 local_policy.jar
-rw-rr   1 root       sys           4355 Jun 16 2003 US_export_policy.jar
-rw-rr   1 root       sys           2910 Aug 2 2007 local_policy.1.jar
-rw-rr   1 root       sys           2429 Aug 2 2007 US_export_policy.1.jar
-rrr--   1 bin        bin           2910 Dec 12 10:14 local_policy.2.jar
-rrr--   1 bin        bin           2429 Dec 12 10:14 US_export_policy.2.jar
-rrr--   1 bin        bin           2223 Dec 12 10:25 java.policy
-rrr--   1 bin        bin           6871 Dec 12 10:25 java.security
-rrr--   1 bin        bin          41278 Dec 12 10:25 cacerts
Thanks,
Hari

Unable to access /irj and /nwa on the java netweaver 7.01 after update.

Unable to access the http://localhost:50100/irj and http://localhost:50100/nwa only http://localhost:50100 is working.
System info is also working.
Tried to check for different threads but none of them suggest any solution.
Error while accessing irj portal through http://<HOST Name- FULL FQDN>:<PORT>/irj:
 Portal runtime error.
An exception occurred while processing your request. Send the exception ID to your portal administrator.
Exception ID: 07:49_14/06/11_0003_15728450
Refer to the log file for details about this exception.
Error while accessing nwa portal through http://<HOST Name- FULL FQDN>:<PORT>/nwa:
500 Internal Server Error
SAP J2EE Engine/7.01
Application error occurred during request processing.
Details: java.lang.NoSuchMethodError: com.sap.security.core.util.imp.LogonUtils.getOriginalURLFromCookie(Ljavax/servlet/http/HttpServletRequest;)Ljava/lang/String;
Exception id: [000C2983A61700730000003B00001E940004A5AC7B50D8FB]
The sapjeecore is at the sp9
have already applied EHP1 netweaver stack
thanks
Harshit

Hi Harshit,
You mention "Unable to access the http://localhost:50100/irj and http://localhost:50100/nwa only http://localhost:50100 is working."
But did you tried http://<HOST Name- FULL FQDN>:50100 ?
Check whether this is working alright if not then it is related to either firewall or some network config issue (e.g. DNS or IP resolution issue).
Regards,
Pinkle

Codecs for the Java Media Framework now available

Hi,
Firstly, apologies for the "ad"...
The "jffmpeg" project at sourceforge (of which I am a developer) is now producing a codec pack for JMF. This consists of a selection of pure Java codecs, and a JNI wrapper onto the native FFMPEG codecs.
See http://jffmpeg.sourceforge.net/ for details.
Please let me know if you find this useful.
JonathanH

Thanks a lot for your answer...!!!!
I am not really a pro in codecs, and I think that it's the main problem. :p
I want to find a solution (I have to ! ), but it's very difficult for me..
For the mpeg2 Transport stream format : you've totally right !
In the mpeg2 TS format, the main difference with standard mpeg2 is that there is a structure "packet by packet", with a given packet length (188 bytes)... Each packet has an header which gives some information as you've said : transport error bit, synchronisation bit, etc... (and to be true, I have some difficulties understand really what each packet contains... I've understood the IPB principle, but this format is not very clear for me...)
How can I explain my program ? heu...
after extracting datas (I work in real time), at time t, I have in a byte array many 188 bytes blocks
(I store them in a big byte array in a Buffer)... What have I to do with it ? Now, my program reads each 188 bytes and when the time represented is > 100ms, I run the processor on it, and so the decoding process...
Is my error here ? how have I to do ? is it really a problem of size ?
I have transformed my program this morning so as to have datas incoming from a file (and not my peripherical) : so, now, in theory, I can read datas which are not mpeg2 ts. But I haven't made test yet...
But, I suppose that I am going to have the same problems that I have already faced :
if I try to take a large chunk of data, jmf generates an error (I supposed that it's because the videoformat definition doesn't correspond with what jmf is waiting for !):
# An unexpected error has been detected by HotSpot Virtual Machine:
# EXCEPTION_ACCESS_VIOLATION (0xc0000005) at pc=0x0c307669, pid=2992, tid=2604
# Java VM: Java HotSpot(TM) Client VM (1.5.0_01-b08 mixed mode)
# Problematic frame:
# C [jmmpegv.dll+0x7669]
# An error report file with more information is saved as hs_err_pid2992.log
# If you would like to submit a bug report, please visit:
# http://java.sun.com/webapps/bugreport/crash.jsp
the famous error that we often see on this forum....!
And, if I take a little chunk, I have a ffmpeg error (I have understood now why... thanks to you)!
And so, in decoder output, null length datas... logical !
Maybe, I have an error in my program, but I really don't know where...
I have an other problem... I would like to know if it is normal :
I can't register (via jmregister) the NativeDecoder (but I can register NativeEncoder !)...
It's quite strange... I've tried on 2 differents computers, and I have the same error "can't add item"..
Why ? (windows xp - jmf 2.1.1e) jmf error or jffmpeg error or my error ?
I have posted here because I have no guarantee that the problem comes from jffmpeg... I am a jmf newbie...
The exception access violation error is quite surprising...
I know that the format I use is not standart, but ... !!
But, I am going to work again this afternoon, and then, I will post to jffmpeg development !
If my problem can be solved, or if I can prevent other people to have the same problem, I will do !
And if I found the solution to all my problems, I will post it ! :)
EB

How to determine 640/J2EE Startup Framework Binary Patch Level?

Hi All,
We are running BI ABAP with Java Add-in on WAS 640/SUSE/Oracle.
In the ABAP world, there are many options for determining the current kernel patch level. Disp+work -v, SYSTEM->STATUS, etc..
How do I determine the patch level of the J2EE startup framework (ie: jlaunch, jcontrol, etc..)? If I run these commands with '-version', I get a patch level of 0. From System Information, the Cluster Kernel Version is 6.40 PatchLevel 105424.313.
What I am trying to determine is if I have the binaries that map to the latest applied SP (18). Do I need to download J2EERTOS18.SAR and apply the bits or has that already been done? Or is the current patch level for the bits fro the J2EERTOS14.SAR file? Etc...
Any tips/suggestions?
Thanks much,
Greg

Hi
You can check the patch number like this;
D:\usr\sap\FT0\SYS\exe\uc\NTI386>jlaunch -version
Failed to reserve 1610612736 (0x60000000) bytes before loading DLLs (error 8).
jlaunch information
kernel release 700
kernel make variant 700_REL
compiled on NT 5.0 2195 Service Pack 4 x86 MS VC++ 13.10
compilation mode UNICODE
compile time Jan 23 2008 20:42:28
update level 0
patch number 128 <<< Here is the patch number>>
source id 0.144
While regarding which file(s) to apply, please notice that the files you are not talking like
J2EERTOS16_1, is part of the J2EE support package stack, which can be applied with JSPM.
Regarding the kernel, you can alway refer to note 19466, and downlaod the lastest kernel from:
http://service.sap.com/swdc
 Support Packages and Patches ->
 Entry by Application Group "
 SAP NetWeaver and complementary products"
 SAP NETWEAVER" SAP NETWEAVER 7.0"
 Entry by Component"
 Application Server Java
 ===> SAP KERNEL 7.00 64-BIT UNICODE
Regards,
Thunder

Error running startup framework

Hi,
We are running EP 6 Sp2 p4 hf 8 on hp-ux 11.11 operating system, and
We installed startup framework according to document "Installing and
Configuring the 6.40 Startup Framework to Use with SAP J2EE Engine 6.20
(Last update: 23.09.2004)", we installed patch PHCO_30544 for the os.
We used the latest version of SCSCLIENTEP.SAR.
The problem is that for a heap size more than 1G the startup framework
doesn't work.
The following error is in the file ../os_libs/work/dev_server:
[Thr 4] *** ERROR => JHVM_LoadJavaVM: Cannot create Java VM (rc=-1)
[jhvmxx_mt.c 480]
[Thr 4] *** ERROR => Cannot load Java VM (client) (rc=-1)
[jlnchxxi_mt. 590]
[Thr 4] SigISetIgnoreAction : SIG_IGN for signal 18
[Thr 4] JLaunchCloseProgram: good bye (exitcode=-1)
Best regards,
Bogdan

I doubt it is the heap size itself. Have you checked all your java startup params (flags). Having an improper flag, such as -XXNewSize=192 (missing a ":" between XX and NewSize) will give you such an error.

Error when building the Java pricing userexit manual code

I went throught the manual for the pricing userexit manual... it tells you to ignore the errors when you do an ant build but I want to remove all the errors since they dont let the rest the code compile.... where are the jars for these errors:
[javadoc] C:\DEV\PRC_UE_CUSTOMER\lib_src\src\com\sap\spc\document\DocumentConstants.java:16: package com.sap.vmc.logging does not exist
 [javadoc] import com.sap.vmc.logging.Category;
 [javadoc] ^
 [javadoc] C:\DEV\PRC_UE_CUSTOMER\lib_src\src\com\sap\spc\document\DocumentConstants.java:26: cannot resolve symbol
 [javadoc] symbol : class Category
 [javadoc] location: class com.sap.spc.document.DocumentConstants
 [javadoc] public static final Category CATEGORY = Category.getCategory(Category.APPLICATIONS, "/AP/SPC/Document");
 [javadoc] ^

See the [SAP note 809820 - Userexit concept for pricing|https://service.sap.com/sap/support/notes/809820]
Use ZIP file the attached to the above note - PRC_UE_CUSTOMER_V105.zip
ZIP file contains an Eclipse .project file that has the required build path. If you read the documents carefully, it does refer this project file.
<?xml version="1.0" encoding="UTF-8"?>
<classpath>
 <classpathentry kind="src" path="src"/>
 <classpathentry sourcepath="lib_src/src" kind="lib" path="lib_api"/>
 <classpathentry kind="lib" path="lib_vmc_api/base_services_stripped_api.jar"/>
 <classpathentry kind="output" path="bin"/>
</classpath>
Again read the documents thoroughly. They are neither fictions nor non-fictions, but technical documents written with care. So, we must also read them with care. If we don't follow them, then it is time to engage someone who does. )
BTW, coming back to the Java basics - One must have a class and source files to debug. You won't get a class file unless it is compiled. The Java file won't compile correctly if it has syntax / reference errors. Unfortunately or fortunately, all these apply to the IPC java userexit development as well.
Easwar Ram

Java Media Framework fails on Windows 7

I wrote a Java program to manage and play my MP3 files. This program works fine on Windows XT and Windows Vista but does not work on the new laptop I just purchased with Windows 7. The Java Media Framework cannot play my MP3 files running on Windows 7. Does anyone know of a fix? I saw some very old forum posts where the poster asked if anyone knew how to obtain the source code for the Java Media Framework. If I could get my hands on the source, I would debug the problem and provide the fix to the Java community. So does anyone know of a fix to Windows 7 problems or know how to get the Java Media Framework source code????

I believe you are right. I didn't know how much native support the JMF code requires but that must be the problem because it doesn't work on Windows 7. I think I would get some other error if the native libraries needed by JMF were not available on Windows 7. Appears that the native code is invoked but fails for some reason resulting in the JMF ControllerEventError that I get when attempting to play my MP3 files. I always had an error on a very few MP3 files that I have downloaded using LimeWire but the songs were playable by Windows Media. So whatever native support JMF uses, it is not the same as Windows Media or JMF is just not using the native MP3 support correctly. I guess I will just have to keep my Music Library on one of my older computers and not use my Java program on Windows 7 to play my MP3 files. Do you have any idea if the programmers who wrote the JMF code are still maintaining it? Perhaps they would be interested in fixing the Windows 7 problem in a new release??

Plugin check reports outdated Java on Mac, but Apple update says it is up to date

This is on a Mac
I used the "Plugin check" to make sure all the plug-ins were up to date.
It said the Java plugin needs to be updated. That takes me to the Java page, which says that Apple supplies its own version of Java and to use Apple Update. Apple update says the system is up to date.
The plugin checker should report an error only if the version of Java can be updated. It cannot be on a mac.

That's a known bug:
[https://bugzilla.mozilla.org/show_bug.cgi?id=573848
Bug 573848 - Java Embedding Plugin reported as out of date, when up to date]
The Java Embedding Plugin is bundled with current Mac distributions of Mozilla browsers, including Firefox. The latest version of the JEP should be 0.9.7.3 - see
http://javaplugin.sourceforge.net/ for more information.
Apple provides the Java software needed for running Java applets via Apple's Software Update feature. The current Java version offered by Apple for OS X 10.6 is [http://support.apple.com/kb/DL972 Java 1.6.0_20]. You can test your Java version at these sites:
*http://browserspy.dk/java.php
*http://javatester.org/version.html
Ref:
* [[Using the Java Plugin with Firefox]]
* [http://kb.mozillazine.org/Java]

Java Media Framework silent install

Hi,
When I install JMF on HP laptop, in JM studio File->Capture i donot get "use video device" portion so i am not able to capture video with the help of WebCam :( on other hand if i install JMF on Dell laptop, JM studio->File->Capture is disabled may i know what can be possible reason of this?
Please guide me help.

983818 wrote:
I need to install the Java Media Framework to over 1000 windows computers. How to do this. MSI package does not exist. Oracle does not change this installer since 1998. Oracle spit of the fact that someone is forced to use this software. I hate proprietary software.You should take the hint: it is abandoned, don't use it.

Silent installation Java Media Framework

Anyone knows the parameters to install the Java media framework 2.1.1 in silent mode?
Thanks

Abra-Cadabrah!
There is no such option. Though you might deploy JMF using JWS, for a less painful experience for your users.

ISO7816 for the Java Card Development Kit

I'm having problems compiling the sample applets for the Java Card Development Kit (2.1.2). I keep getting the error that anything related to ISO7816 is not recognized. Is there something else I need to have in order to run this?

You must have not Downloaded the Java Card API211 &Must not Have Given the class path.
Neelesh

The Java startup framework must be updated - SAP JVM 4

Similar Messages

Maybe you are looking for