The language in my iPhoto program changed and I can't change it back to English

My IPhoto program change language from English to French and I don't know how. I went into my setting and deleted all languages except English and it does not help. Any suggestions on how to get it back to English? I can't read French.

Open the Finder's View menu, choose Sort By, and specify None.
(125861)

Similar Messages

The screen on my phone keeps magnifying and I can't get it back to normal?

The screen on my phone keeps magnifying and I can't get it back to normal. I have tried turning to power down, but it won't let me. I have turned it off and on and that doesn't work. Help!

Turn zoom off: Double tap with THREE fingers, then go into Settings>General>Accessibility and turn zoom off for good.

My iPad was changed to Suomi language and I can't set it back to English the settings are not the same so that does not help

iPad changed to Suomi language can't set it back to English. The settings are not the same as the advice given by support???

Just follow this:
http://support.apple.com/kb/ht2371

By mistake I have lost My "Firefox" that was in the English language & instead I have one in a foreign language. How do I change it back yo English?

I have an apple computer.A week or so ago a window appeared that ask if I wanted an upgrade on Mozilla Firefox & if so click on "Install" which I did. Somehow by mistake this changed my Firefox program from the English language to a foreign language.( I think it might be "Turkish" but not sure.) How do I change it back to English?

Firefox 4 versions and later do not run on a PowerPC Mac.<br />
Firefox 4 and later require at least OS X 10.5 and an Intel Mac.
* http://www.mozilla.com/firefox/9.0/system-requirements/
For an unofficial Firefox 9 compatible version (TenFourFox) that runs on PowerPC Macs with OS X 10.4.11 or OS X 10.5.8 you can look at:
* http://www.floodgap.com/software/tenfourfox/
* http://www.macupdate.com/app/mac/37761/tenfourfox
* http://code.google.com/p/tenfourfox/wiki/PluginsNoLongerSupported
Firefox 3.6.x (Mac OS X 10.4 and later) can be found here:
* http://www.mozilla.com/en-US/firefox/all-older.html

Somehow i have changed the language readout on my IPod to Japanese-how do i get it back to English?

somehow I have changed the readout language on my IPod to Japanese-how do I change it back to English?

Click here and follow the instructions.
(64102)

Last night all the spreadsheets disappeared from "Numbers" and likewise all the documents from "Pages." What happened and how can I get them back?

All my spreadsheets and documents disappeared from my iPad. Where did they go and how can I get them back?.

I have the same problem for spreadsheets (via Numbers app). My spreadsheets were present and working as of last week. And these past few days all of them just disappeared!
Any help or thoughts would be very much appreciated. Thank you.
I'm on an iPad Air.

HT1222 i live in Thailand and suddenly while updating my itunes, everything is in Thai language. How do i change this back to English?

I live in Thailand and for some reason, when my mac updated the software for my itunes, it changed everything from English into Thai. How can i change the language back to English?

scroll down to the very bottom of itunes and change the country?

I accidently changed my language and I can't get it back to English!

Please help!

''david.abel wrote:''
On the Firefox home page, the Arabic language has suddenly started to appear
Is the language for the menus and other user interface elements still English? If so,
# Click the ≡ Menu Button and choose Preferences.
# Click the Content icon.
# Below Languages, click the Choose button.
# Make sure a specific variant of English like ''en-us'' is at the top, followed by ''en''. Remove any unwanted languages as well.
[[Settings for fonts, languages, pop-ups, images and JavaScript|Settings for fonts, languages and pop-ups]]
''david.abel wrote:''
Also, my browser history has started to take up part of the screen.
I don't know what you mean by that. Please attach a screenshot.
* [[How do I create a screenshot of my problem?]]

My Firefox has suddenly changed to Arabic and I can't get it back to English

On the Firefox home page, the Arabic language has suddenly started to appear, and the cursor moves from right to left. Also, my browser history has started to take up part of the screen. I can't get rid of thrse annoying features.

''david.abel wrote:''
On the Firefox home page, the Arabic language has suddenly started to appear
Is the language for the menus and other user interface elements still English? If so,
# Click the ≡ Menu Button and choose Preferences.
# Click the Content icon.
# Below Languages, click the Choose button.
# Make sure a specific variant of English like ''en-us'' is at the top, followed by ''en''. Remove any unwanted languages as well.
[[Settings for fonts, languages, pop-ups, images and JavaScript|Settings for fonts, languages and pop-ups]]
''david.abel wrote:''
Also, my browser history has started to take up part of the screen.
I don't know what you mean by that. Please attach a screenshot.
* [[How do I create a screenshot of my problem?]]

Firefox treated the google logo as a pop-up, and I can't get it back.

I right-clicked on the google logo yesterday intending to look up some more logos images, and a mozilla message popped up at the top saying something like "firefox has blocked all images from this site as a pop-up. do you want to reverse this?"
Since I'd not asked for this I didn't ask for it to be reversed, but now when I go to google I don't get the google logo, and I can't find any way to reverse what happened. I have gone to the content panel in options and listed google.com as a site I'll accept pop-ups from, and it didn't make a difference.
I want to see the google logo image when I go to google.

Sounds that you blocked images from the Google<i></i>.com domain.
See:
* http://kb.mozillazine.org/Images_or_animations_do_not_load
* You can see the permissions for the domain in the current tab in Tools > Page Info > Permissions
* You can see all exceptions in Tools > Options > Content: Load Images > Exceptions
* You can check the Tools > Page Info > Media tab for blocked images (scroll through all the images)

Why does the "more info" of "Get info" get erased after the first time I look at it, and how can I get it back?

When I download a graphic, photo, or PDF, I can get information about it, including size and the web address of the download, using Get info. But in Mountain Lion, after I look at a file once, this information disappears. This wasn't true of Snow Leopard, though I can't remember whether it was true of Lion. In any case, it seems like a bug. Is there a way to recover this information?

Only when i go to a different browser (like IE) after i clear it , then all that shows up is the pages i visited in IE , that is what bugs me , why is IE browsing history sowing up in Firefox ??
Basically , i can clear the history in Firefox , and then for a example , go to Craigslist , using IE7 (launching it from a complete different Icon , in other words at that time i never open Firefox) , then after closing out , or even leaving open as it does not seem to matter , i go into Firefox , and hit History , and there is every place i visited in IE7 , on my History in Firefox

Problems realted to changing the language for non-Unicode programs from one into anther.

Hi,
Hi everyone!
Product Name: HP Pavilion dv6-6093ex
Product Number : LM610EA#A2N.
My Windows 7(464Bit) Ultimate, and its base language, and display language is English.
The Languages(English, French and Arabic) built-in (came re-downloaded and re-installed by the person who made the Windows disc installation). Thus, while installing Windows 7, those three lanauge listed for me to choose one of them to be the base language
and display language, I have chosen 'English'. In the End of installation, there are three pre-packaged languages(English and French and Arabic) can be used as a display language.
I would like anyone kindly to confirm for me why I have been facing these problems when changing language for non-Unicode programs from English into Arabic.
First: After I have installed the AMD High-Definition Graphics Driver (sp55092) 8.882.2.3000 on my laptop. The contents of the of Intel Graphics and Media Control Panel are partially shown in Arabic while language for non-Unicode programs
is Arabic, however, they are completely shown in English while language for non-Unicode programs is English.
A: I found that contents of the of Intel Graphics and Media Control Panel are partially shown in Arabic (second screen shot below, however,
when click on any options, for example 'Graphics properties' shown in Arabic in, the second window is shown in English) while language for non-Unicode programs is
Arabic, and it doesn't matter what format or location is.
B- when I changed language for non-Unicode programs into
English.
I found that contents of the Intel Graphics and Media Control Panel are completely shown in English .
Second:
A- Only All Arabic contents will be displayed encryptely while language for non-Unicode programs is English
B- All the Arabic contents are displayed properly while language for non-Unicode programs is Arabic.
Third: an error extracting drivers and software downloaded from official HP website while language for non-Unicode programs is English.
A- I noticed an error extracting all kinds of comprised files(drivers and software) downloaded from HP website while language for non-Unicode programs is English and whatever location and format are:
B- However while language for non-Unicode programs is Arabic, there is no error extracting files.
In conclusion, Is it normal
for all of you the contents of the of Intel Graphics and Media Control Panel are partially shown in your native while language used
for non-Unicode programs is your native lanague, however, they are completely shown in English while language for non-Unicode programs is English?. IF so I would be saying that if I have wanted the contents of documents written in my language
Arabic to be shown properly, then then I
must let the language for non-Unicode programs be Arabic.
Is this happens with you as well?
Also, if I need extracting all kinds of comprised files(drivers and software) downloaded from HP website, then language for non-Unicode programs
must be in my Arabic lanague English and whatever location and format are.
Is this happened with you as well?
I would highly appreciate any clarification from you.
A man should convert his anger and sadness into strength to continue living in this life.

Hi,
I am confused about your issue.
when you changed language for non-Unicode programs into English, it show English.
while language for non-Unicode programs is Arabic, it show Arabic, If it's none-Unicode.
This is correct. Why you think it's an issue?
About your second scenario description, I was not clear what you said. Could you give us a explanation?
Note: System display language is not the un-Unicode program language.
You can just choose one language to display the system at same time.
This article might be helpful to you:
Install or change a display language
http://windows.microsoft.com/en-in/windows7/install-or-change-a-display-language
Change the system locale
http://windows.microsoft.com/en-in/windows/change-system-locale#1TC=windows-7
Karen Hu
TechNet Community Support

Problems realted to changing the language for non-Unicode programs

Hi everyone!
Product Name: HP Pavilion dv6-6093ex
Product Number : LM610EA#A2N.
My Windows 7(464Bit) Ultimate, and its base language, and display language is English.
The Languages(English, French and Arabic) built-in (came re-downloaded and re-installed by the person who made the Windows disc installation). Thus, while installing Windows 7, those three lanauge listed for me to choose one of them to be the base language and display language, I have chosen 'English'. In the End of installation, there are three pre-packaged languages(English and French and Arabic) can be used as a display language.
I would like anyone kindly to confirm for me why I have been facing these problems when changing language for non-Unicode programs from English into Arabic.
First: After I have installed the AMD High-Definition Graphics Driver (sp55092) 8.882.2.3000 on my laptop. The contents of the of Intel Graphics and Media Control Panel are partially shown in Arabic while language for non-Unicode programs is Arabic, however, they are completely shown in English while language for non-Unicode programs is English.
A: I found that contents of the of Intel Graphics and Media Control Panel are partially shown in Arabic (second screen shot below, however, when click on any options, for example 'Graphics properties' shown in Arabic in, the second window is shown in English) while language for non-Unicode programs is Arabic, and it doesn't matter what format or location is.
B- when I changed language for non-Unicode programs into English.
I found that contents of the Intel Graphics and Media Control Panel are completely shown in English .
Second:
A- Only All Arabic contents will be displayed encryptely while language for non-Unicode programs is English
B- All the Arabic contents are displayed properly while language for non-Unicode programs is Arabic.
Third: an error extracting drivers and software downloaded from official HP website while language for non-Unicode programs is English.
A- I noticed an error extracting all kinds of comprised files(drivers and software) downloaded from HP website while language for non-Unicode programs is English and whatever location and format are:
B- However while language for non-Unicode programs is Arabic, there is no error extracting files.
In conclusion, Is it normal for all of you the contents of the of Intel Graphics and Media Control Panel are partially shown in your native while langauge used for non-Unicode programs is your native lanague, however, they are completely shown in English while language for non-Unicode programs is English?. IF so I would be saying that if I have wanted the contents of documents written in my language Arabic to be shown properly, then then I must let the language for non-Unicode programs be Arabic. Is this happens with you as well?
Also, if I need extracting all kinds of comprised files(drivers and software) downloaded from HP website, then language for non-Unicode programs must be in my Arabic lanague English and whatever location and format are. Is this happened with you as well?
I would highly appreciate any clarification from you.
This question was solved.
View Solution.

Hi cooperator,
I saw your post regarding the language questions and I will be happy to help. What are you are experiencing with the languages is normal. The base operating system is in English and while you can change the display language the core kernal of the operating system would be in English.
The reason that the Intel Graphic and Media Control Panel is in English and the rest in Arabic is because the driver would have been designed in English and is hard coded as into the driver but the display language is set to Arabic. So when the language is set to English everything will be in English.
The reason you having issues extracting drivers when you English set at the language is because the HP website will determine where in the world you and when you download the driver it will be the appropriate language for the country you are from. So when it extracts it will look for the proper extraction path using Arabic but everything is English. It work no problem when you are on Arabic because the driver can read the path properly.
Thank you,
Please click “Accept as Solution ” if you feel my post solved your issue.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Thank you,
BHK6
I work on behalf of HP

My friend changed the language on my phone I then changed it back to english, and for some apps I download it is in a different language, i have tried restoring my phone and it is still doing this, know how to help?

My friend changed the language on my phone I then changed it back to english, and for some apps I download it is in a different language, i have tried restoring my phone and it is still doing this, know how to help? It only seems to happen for some apps and I have spent a long time trying to fix it.

Oops...my phone is running 6.0.1

I just created a new iPhoto library with holding the option key down and then opening iPhoto with version 7.1.5. I changed the name of the first library to iPhoto library 1 and now I all my photos are gone. My operating system is Mavericks.

I just created a new iPhoto library with holding the option key down and then opening iPhoto with version 7.1.5. I changed the name of the first library to iPhoto library 1 and now I all my photos are gone. My operating system is Mavericks.

launch iPhoto wile holding down the option key and select the original library - when you create a new library of course it is empty
And you seriously need to backup your iPhoto library and purchase and install iPhoto '11 version 9.5.x from the App store and download and run the iPhoto library upgraded \then run the new iPhoto - 7.1.5 is not fully compatible with Mavericks
LN
PS you also need to update your profile - it states that you have OS X 10.6.8

The language in my iPhoto program changed and I can't change it back to English

Similar Messages

Maybe you are looking for