The missing link between DB and RSS

Hi there, I have been making Database driven websites for a
while with simple Access databases. Now with DW CS3 i-m entering
the world of ajax and Spry and I am noticing that it all works with
XML files that contain the information to be displayed on the site
and I-m having a hard time or just don-t get how to get my DB
information dynamicaly generate the XML file neccessary to display
a SPRY table with content from the database.
I remember Interakt having a RSS creator that would
automaticaly generate the necesary XML file from a query so it
could be then used for anything else. But it is not supported any
more with CS3
What I-m trying to say is. How for example any Blog site has
an RSS buton that when clicked opens an XML file with the feed
without having the owner manually have to generate such xml file. I
have lots of info on databases that would love to show with those
wonderfull SPRY lists and detail Divs but just can-t find out how
to get the content from the DB in to my XML file.
I feel stupid asking this after working so long with DB and
ASP, but we can not all know everithing.
Happy coding and thanks for your time.

Generating XML from database records isn't that much
different tham
generating HTML.
I would suggest to read these docs:
http://labs.adobe.com/technologies/spry/articles/xml_primer/xml_primer.html
http://labs.adobe.com/technologies/spry/samples/utils/query2xml.html
Massimo Foti, web-programmer for hire
Tools for ColdFusion and Dreamweaver developers:
http://www.massimocorner.com

Similar Messages

Missing link between Itunes and Music Loaded from CDs

Somehow itunes no longer recognizes the link between itunes and music loaded from my Cds (error message in itunes indicates original file could not be found). I can establish this link manually one by one and the songs play but how can I establish this link other than manually one by one in itunes ?

    Hi again!
     I saved the last message by accident which caused the reply to be sent off and so I had not finished what I wanted to write. Aploogies.
     I didn't find the new iMac hybrid SSD/Disk system easy to understand when it arrived over a year ago. I eventually decided that the 256 SSD section would be best suited to having the Operatin System for greater speed and I must have decided to put the music files on the 1TB internal hard drive along with photos and raw video clips. I can't honestly remember. There was a lot to take in. I wasn't even aware until this failure that iTunes had a default location.
     In addition to having the iTunes folder on the internal 1TB hard drive, I used Time Machine to store the entire computer contents on a 1TB Western Digital external hard drive. I had done my last Time Machine back-up on the 13 February and so I was hoping that by opening one or two songs on the back-up, they might reactivate the 'old' interface with the original playlists on it. That didn't happen but I then realised, while I was still in the Tme Machine back-ups on the WD external hard drive, that in the iTunes Media folder contained within the iTunes folder on the default Users/Username/Music location there was only an Add automatically to iTunes folder which was empty. While still still looking through the Time Machine back-upsI saw that the music instead was stored on the 1TB of internal hard drive as outlined on the first post:
     'The music files are located in folders (name of artists), within a folder (iTunes Music), within a folder (iTunes), within a folder (Music), within a folder (username) on the 1TB of internal disk drive.'
   The iTunes.itl file was last modified on Monday at 21:52. Created on 17th February, 2012. Size 386KB
     Regards,
     DG.

The missing ring between Designer and JDeveloper.

I'm a user of both Designer and JDeveloper and I found a difficulty in making both updated at once.
I would like to have something wich can help to map Designer table definitions to ADF entities but I still don't see anything usefull.
I hoped the integration between Desigern and JDev could help me, but it's based upon Modules and not upot tables and then is useless.
I looked for Jheadstart but it seems to have similar problems.
Is there any plan to fill the gap ?
Is there any viable soluntion already done ?
Tks
Tullio

Repost

Link between iTunes and Library lost. Hard drive failure

Hi!
   I need help with the following problem. (i7 27" iMac/256GB SSD + 1TB of internal disk hard drive. (SATA/7200rpm/3.5"))
          The 1TB internal hard drive on my iMac failed the S.M.A.R.T. Utilities test so Apple called in the computer and I had to have the hard drive replaced. The technicians reloaded the system from a 1TB external Western Digital hard drive; I had backed up the everything on it using Time Machine.
          Unfortunately, the iTunes application cannot now locate my iTunes library. I create a lot of slideshows on Aperture and use music from iTunes on the audio tracks. The titles on the audio tracks are now inaudible and are preceded by a yellow triangle with an exclamation mark inside. Can anyone help me on how I should re-establish the original link between iTunes and its library. The music files are located in folders (name of artists), within a folder (iTunes Music), within a folder (iTunes), within a folder (Music), within a folder (declangreaney) on the 1TB of internal disk drive.
          In trying to solve the problem, I went through the folders and double clicked on one song. This opened iTunes so I highlighted and dragged all the other 'artist-named' folders on the iTunes interface and in doing so, I succeeded in accessing all the files. This is not wholly satisfactory, however, as I do not have my own playlists and more seriously, there is still no link between the Aperture audio tracks.
Sincerely,
     DG.

    Hi again!
     I saved the last message by accident which caused the reply to be sent off and so I had not finished what I wanted to write. Aploogies.
     I didn't find the new iMac hybrid SSD/Disk system easy to understand when it arrived over a year ago. I eventually decided that the 256 SSD section would be best suited to having the Operatin System for greater speed and I must have decided to put the music files on the 1TB internal hard drive along with photos and raw video clips. I can't honestly remember. There was a lot to take in. I wasn't even aware until this failure that iTunes had a default location.
     In addition to having the iTunes folder on the internal 1TB hard drive, I used Time Machine to store the entire computer contents on a 1TB Western Digital external hard drive. I had done my last Time Machine back-up on the 13 February and so I was hoping that by opening one or two songs on the back-up, they might reactivate the 'old' interface with the original playlists on it. That didn't happen but I then realised, while I was still in the Tme Machine back-ups on the WD external hard drive, that in the iTunes Media folder contained within the iTunes folder on the default Users/Username/Music location there was only an Add automatically to iTunes folder which was empty. While still still looking through the Time Machine back-upsI saw that the music instead was stored on the 1TB of internal hard drive as outlined on the first post:
     'The music files are located in folders (name of artists), within a folder (iTunes Music), within a folder (iTunes), within a folder (Music), within a folder (username) on the 1TB of internal disk drive.'
   The iTunes.itl file was last modified on Monday at 21:52. Created on 17th February, 2012. Size 386KB
     Regards,
     DG.

Table Link between Equipment and Sub-equipment

Hi all
My requirement is this
I have one mobile set with a serial number. for that mobile set i have one battery with a serial number, now i want to link both the serial numbers, one as main and another as sub item
I tried by maintaining the battery serial number as sub-equipment in the main mobile set equipment number master,
Let me know the table link between equipment and sub-equipment
I want a report based on the input mobile set equipment number what are all the sub-equipment associated with the main equipment
Also suggest is there any other approach,
Regards
Amuthan M

Hi
EQUZ is the table,if u give the sub equipment in equipment field and execute.you can find the main equipment in superior equipment field

Table link between IBASE and its associated products

Hi,
If we go to the transaction IB53 and enter an IBase number, all the products asssociated with the IBase will be listed out.
Similarly, if we have the IBASE number how can we track the associated products via tables.(i.e) the table link between IBIBIBASE and COMM_PRODUCTProduct_id
Thanks in advance.
-Aaru

In two steps..
1. Convert Product GUID using FM 'GUID_CONVERT'
CALL FUNCTION 'GUID_CONVERT'
    EXPORTING
      iv_guid_x16 = product_guid
    IMPORTING
      ev_guid_c22 = sysuuid-c22.
2. Get the IBASE from view v_ibinr where objnr = sysuuid-c22

How to break the link between photoshop and lightroom when saving a photo?

I've had an ongoing issue with saving copies of photos I import from LR to PS and back into LR. Any multiple copies I make get erased when they move back to LR. My solution has been to save a copy in an extra folder apart from Lightroom and import them in later. It's rough, but it works. But now I have a new demon.
I tweaked a photo in LR, made a copy to keep it safe, then sent the copy over to PH where I did some magic. I Saved As in that special other folder, closed the tab, got the usual box asking if I wanted to save the changes (of course I did), I went back to LR to see both the original and copy changed over to the PS version. I went back to PS, opened the .psd, unclicked the mask, clicked the checkbox, when back to LR and both the original and copy in LR had the mask removed.
I'm missing something here.
There m u s t be a way to break the link between PS and LR so that when I save a copy of a photo I made in LR the original and copy remain two separate photos. Does anyone know how?
Thanks,

I think I am a little confused. What you are describing seems more like a Project Server "Profile" issue, than a SharePoint to MS Project Sync.
If my guess is correct, then you just need to set the default profile to be something other than your computer.
If I am wrong, a screenshot of the error would be really helpful.
Cheers,
Prasanna Adavi, Project MVP
Blog:
Podcast:
Twitter:
LinkedIn:

What is the link between PO and Requisition in database side

hello friends,
please can any one tell me that what is the link between PO and Requisition in database side. means after creating the requisition we will go for create the PO based on that requisition.
want to know that what is the link between both in database side.
Thanks in advance
krish.

Hi,
The link is at distribution level, between:
PO_DISTRIBUTIONS_ALL.REQ_DISTRIBUTION_ID
and
PO_REQ_DISTRIBUTIONS_ALL.DISTRIBUTION_ID
Hope it helps.

Link between knvp and the data belonging to a pernr

Hello
In table knvp there are link between customer and partners. These partners can be companies but also persons.
Thje personnujmber is filled in case.of a person.
Does anyone knows the links or the tables belonging to that pernr ( like the adddres, email etc.).
i do not want the functions.
thanx in advance

Hi,
Master data of personnel number are stored under infotype tables (table PAxxxx).
e.g. the address is stored in infotype 0006 (PA0006), while email is usually stored in infotype 0105 (PA0105)...
The key fields of those infotypes tables are mainly the personnel number, along with the validity dates and a subtype field if needed (e.g. the standard subtype for email in PA0105 is '0010')...
fyi, You can display/maintain all PA infotypes through transaction PA20/30...
Kr,
Manu.

How to customize the link between archivelink and Alfresco

hi,
We are using Alfresco as content manager and we want to scan the invoices according to the "Late Storage with Bar Codes in FI" scenario [http://help.sap.com/saphelp_470/helpdata/en/46/c4317ffc4b11d195650000e82deb58/frameset.htm].
Each scanned invoice will be stored in Alfresco as a pdf file and we want to be able to display it from the sap 'display FI document' transaction (thru 'environment' menu / Additional assignments/object links).
my question is how to make the bridge between sap archivelink and Alfresco for this display ?
how to customize link between archivelink and Alfresco ? Is it possible with customizing only or is it necessary to buy third party software ?
we are working in 4.7.

Hi,
Apparently you need an interface between SAP and Alfresco that implements SAP archivelink.
Once that is in place you can configure a repository in OAC0.
At the link below you find a link to a PDF
http://forums.alfresco.com/en/viewtopic.php?f=14&t=13502
Our company had an own content repository software. It used KGS SAPALINK to make the connection with SAP.
Furthermore CTAC seems to have done development to connect SAP and Alfresco.
Currently we are looking for a new repository system as well. A couple of weeks ago management decided that within some departments Alfresco will be the standard DMS. It would be great if we could use it as content server as well.
Kind Regards
Edmond

Deactivate the link between qualification and appraisal

Hi expert,
i have a question for the qualification(infotype 0024) and appraisal (infotype 0025) in PA here.
After I maintained qualification for infotype 0024, i found that, when i go into appraisal(0025), the screen automaticlly switched to qualification(0024).
As i known, i have already done the configurations for the appraisal, but all the appraisal criterira didn't show in info type 0025.
Anyone knows how to deactivate the link between qualification and appraisal?
please advice.
Thanks,
Liang

Hi Liang,
Goto SM31 -> T77S0.
PLOGI APPRA - make it 0.
PLOGI QUALI - make it space or 0 A032 Q.
Try it.
Regards,
Dilek

[SOLVED] What's the link between AUR and ABS?

Hi!
I'm still a bit new to Arch and recently I added google-talkplugin using AUR (https://aur.archlinux.org/packages/google-talkplugin/).
But apparently there is a link between AUR and ABS that I don't get already...
Most of all, will google-talkplugin be updated automatically when I do a "pacman -Syu" or I'll have to check for new version frequently and recompile everything each time?
I think maybe ABS is the solution to this problem...?
Thanks!
Last edited by Creak (2013-10-27 12:56:00)

Creak wrote:About the AUR helpers, there is quite a long list of search/build helpers.. Is there better ones? I've just seen yaourt in a screenshot once...
This is highly subjective and depends on what you need and what your current experience level is. You will often see yaourt discouraged for new users - it just automates too much, so when something goes wrong, users who haven't used less-hand-holding tools have no idea how to proceed. I use cower, which has a simple command to check which AUR packages you have installed are outdated - but then it is up to you do update them yourself. I'd suggest something like the latter approach.

Establish the link between equipment and its standby equipmnent

Dear experts
How to establish the link between equipment and its standby equipmnent in SAP?
For example, I have one pump in a plant and also i have a standby pump installed next to it...now i would like to establish a relation between these two inorder to track them.
I tried linking them as subequipments, but logically that is not sub equipment.
what is the best way to do it?
Regards

Praveen,
Equipment & Standby equipments are installed on same Function location.
There are below workarounds for solutions.
1. Use Position Number
2. Use A,B,C indicator with Running & Standby status
2. Use link if it is applicable.
3. Use classification system & provide characteristic as Running / Standby
Further u can assign the System condom which is equivalent to equipment running or stop condition during transactional data creation like order..
If it is running it indicates it is working.
If it is in stop condition then at that time it is in standby mode.
Thanks,
Ramesh

Is there any link between oe_order_headers_all and hz_cust_accounts tables. I need to find the cust_account_id for some order_number. Please help me with this

Is there any link between oe_order_headers_all and hz_cust_accounts tables. I need to find the cust_account_id for some order_number. Please help me with this

you can link
OOH.invoice_to_org_id=CUST.cust_account_id   -- invoice customer
OOH.sold_to_org_id=CUST.cust_account_id   -- sold to customer
OOH.ship_to_org_id=CUST.cust_account_id   -- ship to customer

Link between reports and universes

Hi,
How to have automatically the link between Universes and Reports in a repository ?
Which universes are used and by which reports ?
I know where to get the information manually on the report but I don't how to get it automatically.
Is it possible to make a request on meta model ? Is there a tool provided ?

Jerome,
You have to install Auditing (unless it was installed with the initial install, which it looks like for you it wasn't).
Locate the PDF "BusinessObjects Enterprise(tm) XI Release 2 Auditor's Guide" (xir2_bip_auditor_en.pdf).
You will find, among other things, that you will have to locate your software and go through another installing situation, but this time choosing to only add the missing piece (Auditor) -- best to read through the PDF first to get a handle on everthing you need to set up. Also know that DeskI activity is not captured, just WebI (Infoview, modify report, etc).
Thanks,
John

The missing link between DB and RSS

Similar Messages

Maybe you are looking for