The new Nano does not hold it's place in a song.
New software came out today but this problem has not been fixed. This is what happens if I stop the Nano in mid-song (or movement) and wait perhaps more than half an hour to resume. I press play and see where I was in the song that was playing. The song and timer bar are where they were.
But as the music actually starts there is a skip to the next track! What is more, if you try to go back to the previous track, it will skip over it and go back two. If you move forward, it will skip ahead two. It seems impossible to find your way back to where you stopped. No iPod I had before this displayed this problem. I don't think my 80G Video iPod has this issue.
This problem combined with the main Music listing of the iPod in iTunes not holding your user choices make the current experience a little less than it was.
But there is gapless playback. That does count for a lot. Sigh.
OK. Since no one replied I restored my Nano 2. It still does this. Can anyone say theirs doesn't? Stop the music halfway or anyplace inside a track. Let the iPod rest for a few hours. Hit Play again. You see the song you were on and the place where you were. It is in Pause mode. Hit Play again to continue the song. At this point mine skips to the beginning of the next track. If I left click the wheel, it skips over the previous to the one before that.
This does not happen with my 80G Video iPod. It holds it's place and the music continues.
This is an 8G black Nano.
Similar Messages
-
MY new Ipod Nano does not hold a charge. I use it mostly as a watch, perhaps look at it 5 or 6 times in 8 hours, and leave it in sleep mode the rest of the time. I drains to the red line in less than 2 days. My husband's nano will last a week this way. I thought it drained because of looking at photos, so I quit looking at them and it made no difference. Am I doing something incorrectly to cause this short battery life?
You are still under warranty if your iPod is "new." Take full advantage of it by either calling iPod tech support, Apple Care if you have it or take it in to an Apple store or an AASP. Whichever is more convenient for you.
-
My Ipod nana automatically reduces the volume and does not hold my attempts to increase the sound. Help.
There is a Volume Limit setting on the iPod. From the main screen
Settings -> Playback -> Volume Limit
You can check that setting to see if it set too low. -
I have an Ipod touch and recently added new music to my Itunes library. When I sync with the library, the new music does not show up on my ipod. The sync process seems to be working and there is still plenty of space on the Ipod for new music so I'm not sure what the problem is!
What happens when you try to sync?
Was the iPod previous synced to another iTunes library/computer?
Have you successfully synced from this iTunes library/computer before?
Do the songs play in iTunes?
Do you have the right boxes checked to sync?
iTunes: Syncing media content to iOS devices and iPod
Do you have any Restrictions (Settings>General>Restrictions) set that would prevent syncing those songs? -
In the old pages you could simply copy the thumbnail and past a certain page into a different document.
The new pages does not allow you to do this.That and 95 other things it does not let you do.
Pages '09 should still be in your Applications/iWork folder, use that instead.
Peter -
TS1538 My the new ipad does not appear in itunes, Pls help
My ipad does not appear in Itunes to restore or back up data. Thestatus of my device are:
- updated the latest Itunes version 10.6 .
- tried to restart Apple Mobile Device in Window but it still doesn't work.
- Could not restore in DFU becasue the window doesn't recognize ipad. It appeared cable & itunes disk images but it itunes does not recognize.
- When i pluged the ipad in my laptop, window could not reconize ipad neither.
Please help to solve it!Let me summary what i have done in the last few days to try to fix the issue taht the new ipad does not appear on itunes 10.6 so that you guys can have an overview to help me :
- removed previous itunes together with Apple Mobile Device and Bonjours
- Reinstall latest version Itunes
- restart computer (for sure the problem not from laptop becasue my other new ipad and iphone4 stil work well with itunes)
- tried using recovery mode when the iPad is connected with computer and iTunes open; Keep the Powerbutton and the Homebutton pressed at the same time until see the Apple logo on iPad screen.Then wait for about 10 minutes (i repeat this step many times). Ipad is turned on but still not connect to itunes or no notice board appeared on itunes to start restore
- I changed the usb cable/port...nothing change
status of device is:
- battery is fully charged
- My laptop (window 7)
- All what i can get is the ipad is charged when i plug in laptop.
- no apple device is recognized on "my computer" window
- no images tab is pop up as usual to copy photo
Apple experts ...help me...pls... -
please i want to remove the old version of itune, the new version does not delete it for some reason , what i should do?
See https://support.mozilla.org/en-US/kb/firefox-no-longer-works-mac-os-10-4-or-powerpc
Since you have a Intel Mac, if you can upgrade to OSX 10.5.x then you may be able to use more current releases.
jscher2000, You should link to http://www.mozilla.org/en-US/firefox/all-older.html for 3.6.28 since the ftp is not mirrored. -
I install an old version of itune since the new version does not sync with my iPhone but the old version I installed did not play rather it says that it can't read a file 'itune library .itl' written by Newer version of itune how do I installed this old version to work
You need to restore the pre-upgrade backup of the library file in the manner shown in Empty/corrupt library after upgrade/crash.
tt2 -
I have a new mac, i want to transfer my photoshop elements, but the new mac does not have a drive?
Transferring does not work, you need to install using installation files. Downloadable versions can be found at the following linked pages...
PSE 10, 11, 12,13 - http://helpx.adobe.com/photoshop-elements/kb/photoshop-elements-10-11-downloads.html
PSE 7, 8, 9 - http://helpx.adobe.com/photoshop-elements/kb/photoshop-elements-7-8-9-downloads.html -
I have lost the remote that was paired. I bought another remote, but the procedure to pair the new one does not work. I suspect the the AT will work with only one remote at-a-time and i have to unpair the first before pairing the second. If this is true, how do I unpair? If not, what can I do?
I was premature in posting the question. I found the answer in andother posting, and it was successful.
Thanks, and sorry for the false alarm. -
I have upgraded Safari in my Mac, but the new Safari does not work with my system. So I find myself without any working browser. How can I solve this problem and/or install my previous Safari version?
Reinstall Safari 5.1.10 for OS X 10.6.8: http://support.apple.com/kb/dl1569. Might do the trick.
But, frankly, I don't think that simply reinstalling the old Safari will work because of all the peripheral, under the hood changes that happen when you upgrade from one version of Safari to another. Reinstalling 5.1.10 may be insufficient to turn back the clock. (This is the moment where a Time Machine or another form of full backup would save your bacon.)
While you're getting a copy of Safari 5.1.10, get a copy of Firefox (https://www.mozilla.org/en-US/firefox/desktop/), too, so that you have an alternate browser to use as you're sorting matters. -
Sometimes when I open a link in a new tab, the new tab does not load the link.
Sometimes when I open a link in a new tab, the new tab does not load the link. This seems to be random.
Win 7 64
FF 4.0.1This issue can be caused by an extension that isn't working properly.
Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
* Don't make any changes on the Safe mode start window.
* https://support.mozilla.com/kb/Safe+Mode
* https://support.mozilla.com/kb/Troubleshooting+extensions+and+themes -
It worked fine before i updated the most recent update, My old computer readds the new one but the new one does not read the old one now.
Is the iTunes library actually shared on the old computer?
I have never had a need for forcing iTunes to look for shared libraries, it simply detects them. -
If i open a new window instead of a new tab, in the new window does not appear the menu tab
i want to open new windows instead of tabs and in the new window should appear the menu tab and scrolling up and down, but now with the new version the menu tab does not appear and i cannot scroll up and down.
Do you mean opening a window via the File menu (File > New Window) or do you always want to open links that you click on web pages in a new window?
See also:
*http://kb.mozillazine.org/Prevent_websites_from_disabling_new_window_features
You can open the <b>about:config</b> page via the location/address bar.
You can accept the warning and click "I'll be careful" to continue.
*http://kb.mozillazine.org/about:config -
i changed my apple id on my computer on my i phone my new id does not come up and i cannot log into i tuenes
You can't without deleting those applications and downloading them from the new ID, which may require repurchasing paid applications.
(85560)
Maybe you are looking for
-
Illustator Image placed in InDesign CS5 moving position when Exporting to PDF
I have a Illustrator image placed on a master page and when I go to export to a PDF the image moves to the left about 2 inches. The same image on another master page outputs correctly. I copied and pasted it from the page that is working correctly t
-
Hi i have created a RFC and thru that i am submitting a report and calling that RFC in my EP. i make use of the FM "WWW_HTML_TO_LISTOBJECT" so that data mirror image of my report is also displayed in my portal. But the problem is i can't control it,
-
Premiere Pro CC keeps crashing in the middle of work, how do I prevent this?
Whenever I am in middle of editing, my premeire pro always crashes. I have installed the latest updates. Even when I open premeire pro and leave it without using it, after a few minutes it crashes. I checked my event viewer and this is what it showed
-
Hi all, when i am trying to upload the excel template by using the function module " KCD_EXCEL_OLE_TO_INT_CONVERT" to an internal table some field values are missing. i am using the function module " KCD_EXCEL_OLE_TO_INT_CONVERT" and i am uploading
-
Help: Unable to execute a procedure
Hello Folks, Am having a procedure and am trying to execute the procedure in the querytool of sql server. Somehow its returning back with an error. I have no clue where am going wrong. Please advice if anyone has any idea.Thanks execute process_040_s