"The new table link contain TargetFieldNames that are not valid?

I am designing a report based on a sql stored procedure with 3 parameters required. I have a parameter that I would like to make dynamic based on an "Item" table for multiple selections.
I keep getting this error when I run the report
Prompting failed with the following error message: 'List of VAlues failure: fail to get values. (Cause of error: the new table link contains TargetFieldNames that are not valid. Error source: prompt.dll
Error code: 0x8004380d
Can someone point me to an example or tell me if this even possible to do?
Edited by: SHARON SCHMIDT on Feb 17, 2009 3:16 PM

Hi Sharon,
Searching for the error message got many KBase but I hope referring to the following would help you:
1211133 - Using parameters to select one, some or all values in a record selection formula
1220118 - Error: "List of Values failure"prompt.dll Error code: 0x8004380D"
Regards,
Sheeba

Similar Messages

What is font book used for? I read the description but still unsure. Does it contain fonts that are not already on the computer

What can I use font book for? I read the description but still don't get it. Does it contain fonts that are not already installed on my new Mac? Thanks.

Disabling (turning off) a font will make it unavailable for use in any font menu. You can alwasy enable the font(s) again - they're not gone permanantly. DON'T disable System fonts, though -> that's just asking for trouble.
Here's -> https://www.youtube.com/watch?v=JdR6-4lnF5A - a good video tutorial about using Font Book.
Clinton

HT204406 One of my playlists is "ineligible" because it supposedly contains items that are not songs. I unchecked the boxes for those songs, and it's STILL unavailable. Is there a fix for this?

One of my playlists is marked "ineligible" because it supposedly contains items that are not music. I went through the playlist and unchecked anything of the sort, and it still says it's ineligible. Is there another way to fix this?

I have tried all those things I even updated the software to the new iOS system and it still did fix my problem.
What happened is that my garage band looks like it will open then it shuts down.
I have lot of important things on my garage band and I'm afraid that if I uninstall it deleting it then reinstalling it all my work on it will be gone and I can't have that happen.
Everyday I am hoping that when i go to open the app that is will work but it doesn't it gets ready to turn on then it shuts off , the app doesn't even open all the way and turns off.
I really hope I don't have to erase it.
It'll say it's ,lading my songs then it shuts down .
If I waited for the App Store to come up with an update for garage band should I wait till then to update my app so it doesn't get damaged . I don't want to erase it and all my data get erased . I figured if I wait for an update then my garage band will reset itself but won't delete my data. I'm not sure if that will help. Is there anything you or anyone else might know that can help me with this matter ?
Thank you
Simachyahi

The page contains markup that is not valid when attached to master page

Hi,
I have create an web application in VS 2005 and convert into VS2008. now i am facing a problem that a single page is not open in design mode which is inherit from master page.
and a message comes.
Error: The page contains markup that is not valid when attached to master page
please give me the suggestion that how can i open this page in design mode.
Thanks
Gaurav Anand

Neither worked for me. Here is my code.
<
asp:Content ID="Content1" ContentPlaceHolderID="fkhead" Runat="Server">
<script runat="server">
Public Sub Page_Load(ByVal sender As Object, ByVal e As System.EventArgs) Handles Me.Load
If Not Page.IsPostBack Then
Dim a As String = "This is other data"
pqriminadpaylbl.Text = a
pqrimincustlbl.Text = a
pqriminadpaylbl.Text = a
pqriminpcdevlbl.Text = a
pqriminpctoollbl.Text = a
pqriminsaleslbl.Text = a
pqriminspadeslbl.Text = a
pqriminspamatlbl.Text = a
pqrimintdamortlbl.Text = a
pqrimintdcclbl.Text = a
pqrimintddtlbl.Text = a
pqrimintdfclbl.Text = a
pqrimintucdeslbl.Text = a
pqrimintucdollarlbl.Text = a
pqrimintucmatlbl.Text = a
pqriminvolaslbl1.Text = a
pqriminvolaslbl2.Text = a
pqriminvolasyear1lbl1.Text = a
pqriminvolasyear1lbl2.Text = a
pqriminvolasyear1lbl3.Text = a
pqriminvolasyear1lbl4.Text = a
pqriminvolasyear1lbl5.Text = a
pqrimindislbl.Visible =
False
pqriminprevbtn.Visible =
False
pqriminnextbtn.Visible =
False
End If
End Sub
</script>
<style type="text/css">
.trest
.newStyle1
text-align: right;
.table
width: 100%;
.newStyle2
font-size: 20pt;
font-weight: bold;
text-decoration: underline;
text-align: center;
.tdparts2
font-size: 16pt;
font-weight: bold;
.tb25
width: 25%;
font-size: 9pt;
.tb20
width: 20%;
font-size: 9pt;
.tb40
width: 40%;
font-size: 9pt;
.tb30
width: 30%;
font-size: 9pt;
</style>
</
asp:Content>
It works fin, but the designer keeps craping out. This was not happening until recently. Not sure what is up with it.

The new firefox 33.1 and 34 are not compatible with my school Blackboard account

I have used Firefox since it was first introduced. I prefer it to MS Explorer. However the new Firefox, 33.1 and 34 are not compatible with my school Blackboard account, so I had to delete Firefox and use Explorer. I would prefer to use Firefox. Is an earlier version (Prior to 33.1) still available?

It's been a few years since we have had many questions about Blackboard compatibility with Firefox, but overall the problems in that past had to do with either Blackboard not updating in a timely manner ''[which I don't think is the case any longer]'' OR the school wasn't running the latest version of Blackboard software ''[which considering the current state of many government budgets, may be the case now.]''.
''It appears that - http://www.blackboard.com/ - is a new or greatly modified website, as the bookmarks I have saved for reference pages on their website come as 404, so I can't find the information I have used in the past.''
My advice is to install Firefox Portable ESR to your hard drive for use at that Blackboard website and continue to use Firefox 34 for other purposes. The "portable" version will instal and use a Profile that is totally separate from your regular Firefox installation - so you can have two separate Firefox versions installed without any problems.
http://portableapps.com/apps/internet/firefox-portable-esr
'''ESR''' stands for Extended Support Release.

HT1351 We had 2 computers: his itunes library on one, and mine on the other. We got rid of both of those and got a new computer. I put music on the new computer. My ipod songs are not on itunes. Will I erase them if I sync? How do I add new music?

We had 2 computers: his itunes library on one, and mine on the other. We got rid of both of those and got a new computer. I put new music on the new computer. My ipod songs are not on itunes on the new computer. Will I erase them if I sync? How do I add new music?

See this older post from another forum member Zevoneer covering the different methods and software available to assist you with the task of copying content from your iPod back to your PC and into iTunes.
https://discussions.apple.com/thread/2452022?start=0&tstart=0
B-rock

Uploading problem - links / files uploading that are not in indd file

One article in a folio is giving us problems that none of the other articles are. It's taking ages to upload, and appears to be uploading links that are NOT in the indd file.
The INDD file contains nothing fancy, several MSOs, and one object using image sequence. ANy ideas why it could be uploading files not used in the indd file?

You’re not the first to get tripped up by it.
Bob

This column cannot enforce unique values because this list or document library may contain items that are not viewable by all users.

The above error occurs when I place unique constraint on a column in a custom list. This error only occurs because the custom list has been configured to only allow creaters to view and edit their own list items.
I just can't see why that should prevent SP from placing a unique value constraint though.
One easy workaround would be to place the unique constraint on the SQL Server table that represents this list. However, in a hosted environment, it is not always possible to gain access to the backend server. What is more, I am uncomfortable with this
approach as it may break other parts of SP 2010.
Is there any other approach?

Hi,
If SharePoint were to enforce uniqueness on a column in a list where users are only allowed to see and edit list items that have created, then you could have a scenario where -
a. user1 tries to add a new item to the list which violates the uniqueness constraint
b. SharePoint reports an error
c. user1 gets to know that there is another item containing the same value in this list
d. this violates the security settings that you configured (each user should be allowed to only see the items that they have created). Now if you change the permissions settings to allow users to SEE all items, but only
edit items that they have created, this error disappears (obviously).
Now getting to the workaround you mentioned (creating a unique constraint on the SQL Server table). This is not going to be possible for numerous reasons -
a. Modifying (or for that matter, even performing SELECT operations on) the SQL Server tables is an unsupported operation and it will definetely break other things in SharePoint, not
to mention that you will lose all support options from Microsoft. However if you don't care about this, then it will still not be technically possible because...
1. SharePoint does not create a new SQL Server table for every list/library.
2. If you did get around to enforcing a unique constraint in the one single table that SharePoint uses for all lists, then you will be enforcing this constraint on each and every list in all the sites and in all the site
collections that are assigned to that content database.
Please "Mark as Answer" if a post has answered your question or "Vote as Helpful" if it was helpful in some way. Here's
why

Method needed to identify Contacts that are not valid from the Comp Screen

Problem
My Company has 65k contacts in the system, we do not delete contacts that are no longer at company, as when we buy data our data in some cases will be more up to date that the third party data available on the market. This then means when a user looks at a company record and the related contacts, he has to hover the cusor over each of the contacts to check if they are valid or not.
Goal
When a user looks at the contacts linked to the company the following fields will be presnt:
Contact Valid
Contact Leave Date.
This will then mean the user will be able to see without looking which contacts are valid and which are not.
Problems
I have tried to create a contact page layout with the fields needed however the only fields avaiable are as follows:
Company ID
Company Name
Company Status
Contact ID
Contact Name
Contact Roles
Location
Primary
Can anybody help?

Thanks for the reply.
However I think I didn't make myself clear in my post in terms of the problem. The problem I have is that when a user looks at a company (account) record the user see the following information in relation to which of the available contacts to select "Primary,Last & First name,Job Title, Contact Role, Work Phone and Email". However none of these fields show if the contact is valid or if they have a leave date.
Both Contact Valid and Contact Leave date have been set up in the system within the contact record. I want to change the layout and have spent hours in the following screens and functions.
Page layout Management
Company/Contact Related Information layout
Related Information Setup
Company/Contact page layout
The problem is the screens/functions where I think I could add the two above mentioned fields end up with me turning the fileds into required or read only fields, and the section where I want to drag in the fields to display has the two fields missing.

ICal publishing link includes events that are not on calendar

I have an event that is showing up in the publish link of iCal, even though it is not on the calendar itself. I have search my computer inside and out and cannot find where it is coming from. I need to get this deleted off asap! Can anyone help?? Thanks!

Tried these...still didn't work.
I believe it was put in through entourage before we began using iCal in 2006. I had set it up on my iBook. We transferred everything to my new Macbook Pro in 2007. This is the only entry that I have had a problem with. It has been showing up ever since then and we haven't had any luck getting rid of it.
We only used the entourage a short time before changing to the iCal. Short of setting up a new calendar and then going one by one and changing the events to the new calendar I don't know what else to do. This is for a church calendar that we have linked to our website, so it will take a little while to get everything done. If that doesn't work, I will just give up!
I will wait to hear back from you to see if there is any other option. I REALLY appreciate your time and effort in my problem! THANKS A BUNCH!!!!

Is there any way to accept the apple terms and conditions using the website or any other ways that are not flawed to being unusable?

I have tried using the set in system of trying to update an app and being prompted to agree, but every single time Apple's gay system keeps telling me that my session has timed out and I should try again. I have tried multiple times to have it sent by email, but every one of those show up as "there was an error and email failed. Please try again.". I signed in on the website and was prompted to agree to the terms and I did, but Apple still will not let me dowload/update apps. Is there any way to get to a part of a website that lets you agree to the terms? If not, is there any fool-proof way that I can do it or a solution to the session timing out issue?

Try resetting your device.
If that fails, Reboot, Reset, Restore.

Selecting pictures that are not in albums

How do I select the pictures that are in my library, however are part of any album in the same library?

Hi, Jacek. You can create a smart album with the criteria to contain pictures that are not in any album ("album" "is not" "any"). This smart album will update to remove pictures - that you place in other albums - from itself.
Hint: In preferences, turn "Show Item Counts" on and see the numbers for yourself to double-check the results of your actions.

Assistance with Error - virtualmachinemanager.psd1 module cannot be imported, one or more members are not valid.

Hello,
We use Orchestrator, System Center 2012 version 7.1.3022.0. I have an orchestrator script that reads through a txt file to find unresponsive virtual machines (Windows 2000 VM's cannot have the SCOM agent installed on them) so we can restart any
machines that are not responding.
The step to Get Computer/IP Status runs successfully in that it reports which VM's are running and which are not running. The next step then is to run a Powershell script that restart the VM's that are down. Here is my Powershell Script:
$ErrorActionPreference = "Stop"
try
Import-Module 'C:\Program Files\Microsoft System Center 2012\Virtual Machine Manager\bin\psmodules\virtualmachinemanager'
Get-VMMServer -ComputerName mlivsmsscvmm
# get vm object
$vm = get-SCVirtualMachine | where { $_.ComputerName -eq "\`d.T.~Ed/{A255D4D8-BD4D-4FF4-9A51-B1ABA82720B9}.Computer-name\`d.T.~Ed/" }
# save data to publish for future activities
$OrigVMMStatus = $vm.StatusString;
$AlertAdded = "\`d.T.~Ed/{A4B4EC8A-E4F8-40AB-9897-6906EAE139AE}.TimeAdded\`d.T.~Ed/";
$VMName = $vm.Name;
# we are at this point because the VM is not responding.
# Start VM - if VM status is "Running" then Stop the VM first
if($vm.StatusString -eq "Running")
{ Stop-SCVirtualMachine -vm $vm -force };
Start-Sleep -s 20;
if($vm.StatusString -eq "Stopped")
{ Start-SCVirtualMachine -vm $vm
$VMrestart = "Yes"
catch
Throw $_.Exception
Upon running the Powershell script I receive the following error in Orchestrator Log histry:
The 'C:\Program Files\Microsoft System Center 2012\Virtual Machine Manager\bin\psmodules\virtualmachinemanager\virtualmachinemanager.psd1' module cannot be
imported because its manifest contains one or more members that are not valid.
This script used to run without errors and nothing has been upgraded in our environment with regards to Orchestrator, VMM, SCOM. How would I find the 'one or more members' that is causing my issue?
Thank you.

Hi,
the thing is that PowerhShell in the "Run .Net Activity" is version 2.0 (http://www.sc-orchestrator.eu/index.php/scoblog/102-running-powershell-30-with-the-run-net-script-activity)
So, try your script embedded in PowerShell {}
Regards,
Stefan
www.sc-orchestrator.eu ,
Blog sc-orchestrator.eu

I just bot a new ipodnano and synched my playlists from my itunes library. However, I am unable to disconnect as it says the the ipodnano contains files that are in use by "another application". What is it talking about and how do I disconnect?

How do I disconnect./eject my new ipodnano after I had synched my playlists (from itunes library on my computer).
Itunes message - CANNOT BE EJECTED BECAUSE IT CONTAINS FILES THAT ARE IN USE BY ANOTHER APPLICATION:.
This is after my synch was succesfull and it says I can disconnect now - but it won't let me.
Keith

For the immediately problem, you can shut down the computer and disconnect the iPod.
There may be a process (program) running on your computer in the background that continuously monitors mounted volumes for things like maintenance, data corruption, and malware. The iPod's storage is a mounted volume. If you know of any such program, such as an "anti-virus" utility, and it has settings that allow you to exclude certain volumes, you can set it to ignore the iPod "disk" when connected.
Also, if you are using automatic syncing (not the manual method) to load the iPod, and you have Enable disk use turned ON, turn it OFF. With Enable disk use turned OFF, iTunes only mounts the iPods disk when syncing, then immediately unmounts the disk. Thus, other processes you have running on your PC (not iTunes) will have less of a chance to make the disk "in use" and cause this problem. You won't even have to eject the iPod before disconnecting.

"one or more of the items in your selection contains Aperture albums that are not supported in iphoto".

I have some folders in iPhoto called 'Recovered Folder'. When I try to delete them I get this message: "one or more of the items in your selection contains Aperture albums that are not supported in iphoto".
I don't use Aperture (did install it to try it out), and have deleted Aperture App from my Mac.
How can I get rid of these fodlers?

i finally figured this out:
fyi, iphoto and aperture can now share (i.e., access) the same library. apple details it here:
http://support.apple.com/kb/HT5260?viewlocale=en_US&locale=en_US
i use both iphoto and aperture, and i suspect something went amiss, at some point, while aperture was accessing my iphoto library.
this is how i fixed the problem:
i launched aperture, then (per the instructions linked above) switched to (i.e., accessed) my iphoto library. i was then able to delete the "recovered folder" and the album it contained. i then quit aperture and relaunched iphoto.
NOTE: at that time, although i expected the "recovered folder" to be gone, it was still present. but this time, i was able to delete the folder from within iphoto without the "contains aperture items" error message.
(Sparky030405, i realize you've since deleted aperture. while i can't say my method is the *only* way to solve this problem, it's the way i was able to solve it. so, you might consider reinstalling aperture in order to delete the folder, then uninstalling aperture, once again.)

"The new table link contain TargetFieldNames that are not valid?

Similar Messages

Maybe you are looking for