The page contains markup that is not valid when attached to master page

Hi,
I have create an web application in VS 2005 and convert into VS2008. now i am facing a problem that a single page is not open in design mode which is inherit from master page.
and a message comes.
Error: The page contains markup that is not valid when attached to master page
please give me the suggestion that how can i open this page in design mode.
Thanks
Gaurav Anand

Neither worked for me.  Here is my code.
<
asp:Content ID="Content1" ContentPlaceHolderID="fkhead" Runat="Server">
<script runat="server">
Public Sub Page_Load(ByVal sender As Object, ByVal e As System.EventArgs) Handles Me.Load
If Not Page.IsPostBack Then
Dim a As String = "This is other data"
pqriminadpaylbl.Text = a
pqrimincustlbl.Text = a
pqriminadpaylbl.Text = a
pqriminpcdevlbl.Text = a
pqriminpctoollbl.Text = a
pqriminsaleslbl.Text = a
pqriminspadeslbl.Text = a
pqriminspamatlbl.Text = a
pqrimintdamortlbl.Text = a
pqrimintdcclbl.Text = a
pqrimintddtlbl.Text = a
pqrimintdfclbl.Text = a
pqrimintucdeslbl.Text = a
pqrimintucdollarlbl.Text = a
pqrimintucmatlbl.Text = a
pqriminvolaslbl1.Text = a
pqriminvolaslbl2.Text = a
pqriminvolasyear1lbl1.Text = a
pqriminvolasyear1lbl2.Text = a
pqriminvolasyear1lbl3.Text = a
pqriminvolasyear1lbl4.Text = a
pqriminvolasyear1lbl5.Text = a
pqrimindislbl.Visible =
False
pqriminprevbtn.Visible =
False
pqriminnextbtn.Visible =
False
End If
End Sub
</script>
<style type="text/css">
.trest
.newStyle1
text-align: right;
.table
width: 100%;
.newStyle2
font-size: 20pt;
font-weight: bold;
text-decoration: underline;
text-align: center;
.tdparts2
font-size: 16pt;
font-weight: bold;
.tb25
width: 25%;
font-size: 9pt;
.tb20
width: 20%;
font-size: 9pt;
.tb40
width: 40%;
font-size: 9pt;
.tb30
width: 30%;
font-size: 9pt;
</style>
</
asp:Content>
It works fin, but the designer keeps craping out.  This was not happening until recently.  Not sure what is up with it.

Similar Messages

  • "The new table link contain TargetFieldNames that are not valid?

    I am designing a report based on a sql stored procedure with 3 parameters required.  I have a parameter that I would like to make dynamic based on an "Item" table for multiple selections.
    I keep getting this error when I run the report
    Prompting failed with the following error message: 'List of VAlues failure: fail to get values. (Cause of error: the new table link contains TargetFieldNames that are not valid.  Error source: prompt.dll
    Error code: 0x8004380d
    Can someone point me to an example or tell me if this even possible to do?
    Edited by: SHARON SCHMIDT on Feb 17, 2009 3:16 PM

    Hi Sharon,
    Searching for the error message got many KBase but I hope referring to the following would help you:
    1211133 - Using parameters to select one, some or all values in a record selection formula
    1220118 - Error: "List of Values failure"prompt.dll Error code: 0x8004380D"
    Regards,
    Sheeba

  • [Forum FAQ] Troubleshooting error "The specified SQL server instance is not valid" when installing SCOM reporting service

    Symptom
    If you have failed to install SCOM reporting service, you may encounter below error when you reinstall it:
    “The specified SQL server instance is not valid”.
    (Figure 1)
    Figure 1.
    Reason
    This issue may be caused by multiple reasons, for example the reasons in Figure 1.
    However, you may find that SSRS and Report Server website are configured correctly and no SSL or proxy Server is used. In these scenario, you can open the log file under path
    to find the root reason:
    C:\Program Files\Microsoft SQL Server\MSRS11.MSSQLSERVER\Reporting Services\LogFiles
    Later, you will find the error as below:
    ERROR: Throwing Microsoft.ReportingServices.Library.ReportServerDisabledException: , Microsoft.ReportingServices.Library.ReportServerDisabledException:
    The report server cannot decrypt the symmetric key that is used to access sensitive or encrypted data in a report server database. You must either restore a backup key or delete all encrypted content. ---> System.Runtime.InteropServices.COMException
    (0x80090016): Keyset does not exist (Exception from HRESULT: 0x80090016)
    at System.Runtime.InteropServices.Marshal.ThrowExceptionForHRInternal(Int32 errorCode, IntPtr errorInfo)
    at RSManagedCrypto.RSCrypto.ReencryptSymmetricKey(Byte[] symKeyBlob, Byte[] pPublicKeyBlob)
    at Microsoft.ReportingServices.Library.ConnectionManager.<GetEncryptionKey>b__2()
    --- End of inner exception stack trace ---;
    Solution
    According to the error message, you can delete encrypted content by following the steps below:
    Open SQL Reporting Services Configuration Manager.
    Select “Encryption Keys”.
    Click “Delete” to delete all encrypted content. (Figure 2)
    Figure 2.
    After that, we can install SCOM reporting service again, after successfully install reporting service, we should see the SCOM operation console as below:
    Figure 3.
    In addition, you may also encounter other errors when installing SCOM reporting service, and the troubleshooting steps may be different. However, we can also check SQL reporting
    service logs to find the root reason.
    Here are some articles that would be helpful for SCOM reporting service installation and troubleshooting:
    How to Install the Operations Manager Reporting Server
    http://technet.microsoft.com/en-us/library/hh298611.aspx
    Unable to install SCOM 2012 Reporting Services
    http://blogs.technet.com/b/mdegre/archive/2013/05/27/unable-to-install-scom-2012-reporting-services.aspx
    Please click to vote if the post helps you. This can be beneficial to other community members reading the thread.

    Hello,
    I'm afraid you must use a dedicated instance of SQL Server for each site(SCOM/SCCM). Some similar issues were disscussed on this forum:
    SCCM and SCOM - SQL Server 
    http://social.technet.microsoft.com/Forums/en-US/configmanagergeneral/thread/bfa14da9-4692-4c64-a107-e085c967d259
    SCOM, SCCM, SQL on same server?
    http://social.technet.microsoft.com/Forums/en-US/configmgrsetup/thread/b5373aa7-5233-4b1f-9b39-b86e481e04d5
    Thanks,
    Yog Li
    TechNet Community Support

  • Get-ChildItem with -LiteralPath is throwing "The specified wildcard character pattern is not valid" when filenames contain brackets

    I'm trying to get a list of folders in a hierarchy that don't contain any mp3 files. (The goal here is to eventually clean up all the "empty" folders that only have album art, thumbs.db, desktop.ini, etc. files left). So I wrote a quick PowerShell
    command to try to do this. But it doesn't seem to be working.
    I already checked out this thread <Get-ChildItem
    SomeFile[].txt occurs error because of the [brackets]: "specified wildcard pattern not valid"> and I think I'm using LiteralPath correctly. Any other hints for troubleshooting this problem? Here's the command I'm using.
    Get-ChildItem -Recurse -Directory | ?{
    @( @(Get-ChildItem -LiteralPath $_.FullName -Recurse) | ?{
    $_.Extension -eq ".mp3"}).Count -eq 0 }
    This is on the latest version of PowerShell found in Windows Technical Preview.

    Fair enough, but it still doesn't answer the original question- why isn't this working with -LiteralPath when the path contains brackets? 
    Get-ChildItem -Recurse -Directory | ?{
    @( @(Get-ChildItem -LiteralPath $_.FullName -Recurse) | ?{
    $_.Extension -eq ".mp3"}).Count -eq 0 }
    Thanks,
    Ben

  • Why does my printed page contain text that is no in the original

    The word document or  Power  Point may containe "the cow jumped over the moon" but the printed page will contain "the )""jumEp over the moon"
    I downloaded the  most recent  driver but the problem persist....is it a software issue or a printer issue?
    John 
    [Personal Information Removed]

    Hi , Welcome to the HP Forums! I see that your printed page contains text that is not in the original. I am happy to help!  For further assistance, I will need some more information:  The Product/Model Number of your printer. (ie: HP Photosmart 7520, etc.) Follow instructions in this link. Finding Your HP Product Model Number.If you are using a Windows or Mac Operating System, and the version number. To find the exact version, visit this link. Whatsmyos.If the printer is connected, Wireless, Ethernet, or USB.If the printer is able to make copies.If the power cable is plugged into a surge protector, or directly to the wall outlet. Issues when Connected to an Uninterruptible Power Supply/Power Strip/Surge Protector. This applies to Inkjet printers as well.The name of the printer you are printing from.  In the meantime, if you are using Windows, please try our HP Print and Scan Doctor, and let me know what happens!  Please see this post, Want Good Answers? Ask Good Questions, by , so you can get the most out of these forums.   Hope to hear from you soon!  “Please click the Thumbs up icon below to thank me for responding.”

  • DPM 2012 R2 install fail - Reporting services "definition contains XML that is not well-formed or the XML is not valid"

    Hi Everyone,
    I've been battling with this for a while and I'm getting nowhere. I'm attempting to install DPM 2012R2 onto a fresh VM with a local SQL installation. The setup is as follows:
    Server OS: 2008R2 SP1
    SQL: 2008 R2 standard with SP3(tried SP2 before this)
    Collation: SQL_Latin1_General_CP1_CI_AS
    Reporting services installed: Yes(ticked do not configure during the installation)
    Enabled reporting servics on port 80 with the default URL
    DPM Installation does not throw any errors during the preinstall stage(The server passes all the checks)
    Basically, when Installing. I get this error(extract):
     at Microsoft.Internal.EnterpriseStorage.Dls.UI.Library.Reporting.Reporter.DeployFileInServer(Boolean recreate, ReportDBInfo rptInfo)
       at Microsoft.Internal.EnterpriseStorage.Dls.UI.Library.Reporting.Reporter.DeployReports(String sourceFolderPath, Boolean recreate, Boolean calledFromSetup)
       at Microsoft.Internal.EnterpriseStorage.Dls.UI.Library.Reporting.Reporter.InstallReports(Boolean calledFromSetup, String sourceFolderPath, String sqlServerName, String sqlInstanceName, String dbConnectionString)
       --- End of inner exception stack trace ---
       at System.RuntimeMethodHandle.InvokeMethod(Object target, Object[] arguments, Signature sig, Boolean constructor)
       at System.Reflection.RuntimeMethodInfo.UnsafeInvokeInternal(Object obj, Object[] parameters, Object[] arguments)
       at System.Reflection.RuntimeMethodInfo.Invoke(Object obj, BindingFlags invokeAttr, Binder binder, Object[] parameters, CultureInfo culture)
       at System.RuntimeType.InvokeMember(String name, BindingFlags bindingFlags, Binder binder, Object target, Object[] providedArgs, ParameterModifier[] modifiers, CultureInfo culture, String[] namedParams)
       at Microsoft.Internal.EnterpriseStorage.Dls.Setup.Wizard.ReportingConfiguration.DeployReports(Boolean isRemoteReporting, String sqlMachineName, String sqlInstanceName, String rsMachineName, String rsInstanceName, String installerPath)
    [10/12/2014 2:35:25 p.m.] * Exception :  => Report configuration failed.Verify that SQL Server Reporting Services is installed properly and that it is running.Microsoft.Internal.EnterpriseStorage.Dls.Setup.Exceptions.BackEndErrorException: exception
    ---> Microsoft.Internal.EnterpriseStorage.Dls.Setup.Exceptions.ReportDeploymentException: exception ---> System.Reflection.TargetInvocationException: Exception has been thrown by the target of an invocation. ---> Microsoft.Internal.EnterpriseStorage.Dls.UI.Library.Reporting.ReportingException:
    exception ---> System.Web.Services.Protocols.SoapException: System.Web.Services.Protocols.SoapException: The report definition is not valid or supported by this version of Reporting Services. This could be the result of publishing a report definition of
    a later version of Reporting Services, or that the report definition contains XML that is not well-formed or the XML is not valid based on the Report Definition schema. Details: Root element is missing.
       at Microsoft.ReportingServices.WebServer.ReportingService2005Impl.CreateReport(String Report, String Parent, Boolean Overwrite, Byte[] Definition, Property[] Properties, Warning[]& Warnings)
       at Microsoft.ReportingServices.WebServer.ReportingService2005.CreateReport(String Report, String Parent, Boolean Overwrite, Byte[] Definition, Property[] Properties, Warning[]& Warnings)
       at System.Web.Services.Protocols.SoapHttpClientProtocol.ReadResponse(SoapClientMessage message, WebResponse response, Stream responseStream, Boolean asyncCall)
       at System.Web.Services.Protocols.SoapHttpClientProtocol.Invoke(String methodName, Object[] parameters)
       at Microsoft.Internal.EnterpriseStorage.Dls.UI.Reporting.ReportingService2005.CreateReport(String Report, String Parent, Boolean Overwrite, Byte[] Definition, Property[] Properties)
       at Microsoft.Internal.EnterpriseStorage.Dls.UI.Library.Reporting.Reporter.CreateReport(String pathOfReport, ReportDBInfo rptInfo)
       --- End of inner exception stack trace ---
       at Microsoft.Internal.EnterpriseStorage.Dls.UI.Library.Reporting.Reporter.CreateReport(String pathOfReport, ReportDBInfo rptInfo)
       at Microsoft.Internal.EnterpriseStorage.Dls.UI.Library.Reporting.Reporter.DeployFileInServer(Boolean recreate, ReportDBInfo rptInfo)
       at Microsoft.Internal.EnterpriseStorage.Dls.UI.Library.Reporting.Reporter.DeployReports(String sourceFolderPath, Boolean recreate, Boolean calledFromSetup)
       at Microsoft.Internal.EnterpriseStorage.Dls.UI.Library.Reporting.Reporter.InstallReports(Boolean calledFromSetup, String sourceFolderPath, String sqlServerName, String sqlInstanceName, String dbConnectionString)
       --- End of inner exception stack trace ---
       at System.RuntimeMethodHandle.InvokeMethod(Object target, Object[] arguments, Signature sig, Boolean constructor)
       at System.Reflection.RuntimeMethodInfo.UnsafeInvokeInternal(Object obj, Object[] parameters, Object[] arguments)
       at System.Reflection.RuntimeMethodInfo.Invoke(Object obj, BindingFlags invokeAttr, Binder binder, Object[] parameters, CultureInfo culture)
       at System.RuntimeType.InvokeMember(String name, BindingFlags bindingFlags, Binder binder, Object target, Object[] providedArgs, ParameterModifier[] modifiers, CultureInfo culture, String[] namedParams)
       at Microsoft.Internal.EnterpriseStorage.Dls.Setup.Wizard.ReportingConfiguration.DeployReports(Boolean isRemoteReporting, String sqlMachineName, String sqlInstanceName, String rsMachineName, String rsInstanceName, String installerPath)
       --- End of inner exception stack trace ---
       at Microsoft.Internal.EnterpriseStorage.Dls.Setup.Wizard.ReportingConfiguration.DeployReports(Boolean isRemoteReporting, String sqlMachineName, String sqlInstanceName, String rsMachineName, String rsInstanceName, String installerPath)
       at Microsoft.Internal.EnterpriseStorage.Dls.Setup.Wizard.BackEnd.DeployReports(String reportserverConfigFilePath, Boolean isOemSetup, String sqlMachineName, String sqlInstanceName, Boolean isRemoteReporting, String reportingServerMachineName, String
    reportingInstanceName)
       --- End of inner exception stack trace ---
       at Microsoft.Internal.EnterpriseStorage.Dls.Setup.Wizard.BackEnd.DeployReports(String reportserverConfigFilePath, Boolean isOemSetup, String sqlMachineName, String sqlInstanceName, Boolean isRemoteReporting, String reportingServerMachineName, String
    reportingInstanceName)
       at Microsoft.Internal.EnterpriseStorage.Dls.Setup.Wizard.DpmInstaller.DeployReports(Boolean isRemoteReporting, Boolean isUpgrade)
       at Microsoft.Internal.EnterpriseStorage.Dls.Setup.Wizard.ProgressPage.InstallerThreadEntry()
    *** Mojito error was: ReportDeploymentFailed; 0; None
    [10/12/2014 2:35:25 p.m.] *** Error : Report configuration failed.
    Verify that SQL Server Reporting Services is installed properly and that it is running.
    ID: 812
    [10/12/2014 2:35:25 p.m.] Information : Data Protection Manager installation has failed. All the items that were copied during the installation process have been removed.
    For details, click the Error tab.
    Any ideas?
    I've managed to get it to this stage. Originally I didn't have encryption keys or a listening port(which I fixed).

    Can you try following steps:
    If there are SSL certificates on your computer, by default SQL 2008
    installation configures HTTPS for reporting websites. When DPM tries to
    deploy reports on these websites it may fail if the reporting websites
    are not accessible (might be due to invalid/expired certificates). To
    workaround this, provided you do not require HTTPS for reporting websites do
    the following:
    1. Edit C:\Program Files\Microsoft DPM\SQL\MSRS10.MSDPMV3BETA1EVAL\Reporting
    Services\ReportServer\rsreportserver.config
    2. Set the SecureConnectionLevel to 0 if the current value is 2 (A value to
    2 means secure connection is required)
    3. Connect to SQL reporting service configuration manager and connect to the
    instance MSDPMV3BETA1EVAL
    4. Click on Web Service URL, click advanced and remove SSL identities
    5. Repeat the above for Report Manager URL
    6. Make sure report manager URL and web service URL are accessible with out
    any errors.
    6. Restart report server
    If that doesn't solve the problem, please try following steps:
    1. Open Start-> All programs->SQL server 2008->Configuration Tools->Report
    Server Configuration Manager
    2. Connect to the instance which the DPM is using to install.
    3. Browse Report Manager URL and web service url
    4. If report manager URL or web service url throws any error say 500 or 404
    fix the error. (Try also replacing machine name with localhost in url)
    5. Otherwise delete DPMReports folder (if present) using below instructions
    6. Restart reporting services
    7. Try DPM setup again.
    Deleting DPM reports:
    1. Open report manager URL in IE
    2. Click show details on right hand side
    3. Put a tick against DPMReports folder
    4. Click Delete button.
    Regards, Trinadh [MSFT] This posting is provided AS IS with no warranties, and confers no rights. If you found the reply helpful, please MARK IT AS ANSWER. Looking for source of information for DPM? http://blogs.technet.com/b/dpm/ http://technet.microsoft.com/en-in/library/hh758173.aspx

  • I created a Pages document inserting 2 columns using 1) Inspector 2) Layout 3) columns.  How do I decrease the height of the column.  Have tried to use cursor and drag down the top border, but that does not reset the top border.

    I created a Pages document inserting 2 columns using 1) Inspector 2) Layout 3) columns.  How do I decrease the height of the column.  Have tried to use the cursor and drag down the top border, but that does not reset/decrease the top border.

    Set your columns back to one for the moment. In layout mode, insert a Text box. Place it in the upper left corner of your document, and drag down and right to the size of the container for your two columns. Click inside the Text Box, and now bump up your columns to 2. Your two columns are now contained in this resizable Text Box.

  • I need to install iWork 09 so I can open the many pages document files that will NOT open under the new pages 5. Mavericks will not accept an install from my iWork's 09 CD. How do I get around this?

    I need to install iWork 09 so I can open the many pages document files that will NOT open under the new pages 5. Mavericks will not accept an install from my iWork's 09 CD. How do I get around this?

    Hi, I'm helping StringSinger2 with this problem.
    The previously installed version is Pages 3.0.3 (the same as from iWork 08). This version (Pages 3.0.3/iWork 08) is incompatible with Pages 5.
    That is why it would be helpful to install iWork 09, which is the version between the two. It will open the older 08 files, and its saved files are readable by the new Pages5.
    SO...
    When I try to install iWorks 09 from my retail DVD the error message is "the installer is damaged". (I know the dvd is good, I installed iWorks09 to my laptop today.) Is the "installer" part of the system files? And - If that is damaged is there a patch for that?
    Many Thanks!

  • I updated my iPad 2 OS to iOS 6.0..after that I am unable to download or update anything from the App Store. The MSG I get is "id not valid for US store. Go to Indian store for purchase"..never faced this problem earlier before the update to OS 6..help!!

    I updated my iPad 2 OS to iOS 6.0..after that I am unable to download or update anything from the App Store. The MSG I get is "id not valid for US store. Go to Indian store for purchase"..never faced this problem earlier before the update to OS 6..help!!

    Apple's response to my email:
    "I understand that you can't update your apps using your iPad.
    Apple is currently working toward a resolution for the issue you have reported. You will receive an email after the matter has been investigated and further information is available.
    Thank you for your patience. Apple wants your iTunes experience to be as enjoyable as possible. Have a great day!"

  • What is font book used for? I read the description but still unsure. Does it contain fonts that are not already on the computer

    What can I use font book for? I read the description but still don't get it. Does it contain fonts that are not already installed on my new Mac? Thanks.

    Disabling (turning off) a font will make it unavailable for use in any font menu. You can alwasy enable the font(s) again - they're not gone permanantly. DON'T disable System fonts, though -> that's just asking for trouble.
    Here's -> https://www.youtube.com/watch?v=JdR6-4lnF5A - a good video tutorial about using Font Book.
    Clinton

  • Destroying connection that is not valid, due to the following exception [com.microsoft.sqlserver.jdbc.SQLServerException: Connection reset]

    Hi everyone, 
    I'm facing the following problem in a Server runing Linux with JBoss AS 4.2.2, JRE 1.6, and MSSQL Server 2005 with JDBC 2.0 (sqljdbc4.jar).
    The thing is: on friday morning I started up the server and everything worked fine ... next, from Friday at 6pm to Saturday at 8am nobody has used the system. 
    Then on Saturday at 8:05 got the following warning lines every time I tried to do something in my application. While it seems that everything works, after a few days the system starts to decrease their performance and malfunction, so I want to know why it
    might happen these warnings.
    I have tried to find a solution to this problem in several places but I'm not succeeding. That's why I'm writing my problem here... 
    Hope somebody can help me!
    Thanks in advance and best regards!
    Cristian.
    This is the "error" log.
    2011-06-11 08:05:29,680 WARN [org.jboss.resource.adapter.jdbc.local.LocalManagedConnectionFactory] Destroying connection that is not valid, due to the following exception: ConnectionID:2941
    com.microsoft.sqlserver.jdbc.SQLServerException: Connection reset
    at com.microsoft.sqlserver.jdbc.SQLServerConnection.terminate(SQLServerConnection.java:1352)
    at com.microsoft.sqlserver.jdbc.SQLServerConnection.terminate(SQLServerConnection.java:1339)
    at com.microsoft.sqlserver.jdbc.TDSChannel.read(IOBuffer.java:1654)
    at com.microsoft.sqlserver.jdbc.TDSReader.readPacket(IOBuffer.java:3694)
    at com.microsoft.sqlserver.jdbc.TDSCommand.startResponse(IOBuffer.java:5022)
    at com.microsoft.sqlserver.jdbc.SQLServerStatement.doExecuteStatement(SQLServerStatement.java:773)
    at com.microsoft.sqlserver.jdbc.SQLServerStatement$StmtExecCmd.doExecute(SQLServerStatement.java:676)
    at com.microsoft.sqlserver.jdbc.TDSCommand.execute(IOBuffer.java:4575)
    at com.microsoft.sqlserver.jdbc.SQLServerConnection.executeCommand(SQLServerConnection.java:1400)
    at com.microsoft.sqlserver.jdbc.SQLServerStatement.executeCommand(SQLServerStatement.java:179)
    at com.microsoft.sqlserver.jdbc.SQLServerStatement.executeStatement(SQLServerStatement.java:154)
    at com.microsoft.sqlserver.jdbc.SQLServerStatement.execute(SQLServerStatement.java:649)
    at org.jboss.resource.adapter.jdbc.CheckValidConnectionSQL.isValidConnection(CheckValidConnectionSQL.java:58)
    at org.jboss.resource.adapter.jdbc.BaseWrapperManagedConnectionFactory.isValidConnection(BaseWrapperManagedConnectionFactory.java:435)
    at org.jboss.resource.adapter.jdbc.BaseWrapperManagedConnection.checkValid(BaseWrapperManagedConnection.java:231)
    at org.jboss.resource.adapter.jdbc.local.LocalManagedConnectionFactory.matchManagedConnections(LocalManagedConnectionFactory.java:200)
    at org.jboss.resource.connectionmanager.InternalManagedConnectionPool.getConnection(InternalManagedConnectionPool.java:211)
    at org.jboss.resource.connectionmanager.JBossManagedConnectionPool$BasePool.getConnection(JBossManagedConnectionPool.java:538)
    at org.jboss.resource.connectionmanager.BaseConnectionManager2.getManagedConnection(BaseConnectionManager2.java:341)
    at org.jboss.resource.connectionmanager.TxConnectionManager.getManagedConnection(TxConnectionManager.java:315)
    at org.jboss.resource.connectionmanager.BaseConnectionManager2.allocateConnection(BaseConnectionManager2.java:396)
    at org.jboss.resource.connectionmanager.BaseConnectionManager2$ConnectionManagerProxy.allocateConnection(BaseConnectionManager2.java:842)
    at org.jboss.resource.adapter.jdbc.WrapperDataSource.getConnection(WrapperDataSource.java:88)
    at org.hibernate.connection.DatasourceConnectionProvider.getConnection(DatasourceConnectionProvider.java:69)
    at org.hibernate.jdbc.ConnectionManager.openConnection(ConnectionManager.java:423)
    at org.hibernate.jdbc.ConnectionManager.getConnection(ConnectionManager.java:144)
    at org.hibernate.jdbc.AbstractBatcher.prepareQueryStatement(AbstractBatcher.java:139)
    at org.hibernate.loader.Loader.prepareQueryStatement(Loader.java:1547)
    at org.hibernate.loader.Loader.doQuery(Loader.java:673)
    at org.hibernate.loader.Loader.doQueryAndInitializeNonLazyCollections(Loader.java:236)
    at org.hibernate.loader.Loader.doList(Loader.java:2220)
    And this is my mssql-ds.xml
    <local-tx-datasource>
    <jndi-name>jdbc/bpmsdb</jndi-name>
    <connection-url>jdbc:sqlserver://ipaddress:1433;DatabaseName=BPMS</connection-url>
    <driver-class>com.microsoft.sqlserver.jdbc.SQLServerDriver</driver-class>
    <user-name>user</user-name>
    <password>pwd</password>
    <min-pool-size>5</min-pool-size>
    <max-pool-size>50</max-pool-size>
    <exception-sorter-class-name>
    org.jboss.resource.adapter.jdbc.vendor.MySQLExceptionSorter
    </exception-sorter-class-name>
    <metadata>
    <type-mapping>MS SQLSERVER2000</type-mapping>
    </metadata>
    <new-connection-sql>select 1</new-connection-sql>
    <check-valid-connection-sql>select 1</check-valid-connection-sql>
    <idle-timeout-minutes>5</idle-timeout-minutes>
    </local-tx-datasource>

    I´m facing similar problem with Linux and SQL Server 2008 R2. I made the downgrade of JDK 1.6 from 27 to 26 (some people reporting errors when upgraded to jdk1.6_29 and rolling back is ok) but for me the error persists. At this moment we are testing with
    sqljdbc4.jar version 4.0 (released in 3/6/2012). The curious I have two equals Linux boxes and only one have presented connection reset errors.
    Thanks in advance.
    Carlos

  • The Value expression used in textrun 'Textbox.Paragraphs[0].TextRuns[0]' returned a data type that is not valid.

    Hi all,
    While viewing report in SSRS 2008 i am getting an error like this
    Warning 1 [rsInvalidExpressionDataType] The Value expression used in textrun ‘Textbox21.Paragraphs[0].TextRuns[0]’ returned a data type that is not valid. 
     sotred procedure
    ALTER
     Procedure [dbo].[spGetSupervisor]
    @START_DATE
    datetime, 
    @END_DATE
    datetime, 
    @CenterID
    varchar(4000), 
    @TITLE
    varchar(100)
    =
    NULL
    as
    Select
     Distinct L1_ID SupID,
    L1_Name SupName
    from
    REF_DB.info v
    inner
    join dbo.fn_MVParam(@CenterID
    +
    P
    v
    .CenterID
    = p.Column1 
    where
    v.startdate
    <= @END_DATE
    and v.enddate
    >= @START_DATE
    and
     (v.title
    IN
    (@TITLE)
    or @title
    is
    order
     by Name
    Here is the expression in Report textbox
    =Parameters!CenterID.Label
    Please
    help me
    Thanks
    in advance
    Jyo
    null)
    ON

    Hi Jyo1105,
    Thanks for your question. Based on my research and experiences, the issue may be caused by you set the @CenterID
    is a multiple values parameter.
    If in this condition, you couldn’t use the expression of
    Parameters!CenterID.Value directly, you
    should use a join() function on the parameter to merge the whole values, or add a sequence number behind the expression to use a specific value, just like this:
    =join(Parameters! CenterID.Value) or
    =Parameters! CenterID.Value(0)
    If your issue still exsits, please feel free to let me know.
    Thanks,
    Sharp Wang
    Best Regards. Sharp Wang

  • HT204406 One of my playlists is "ineligible" because it supposedly contains items that are not songs.  I unchecked the boxes for those songs, and it's STILL unavailable.  Is there a fix for this?

    One of my playlists is marked "ineligible" because it supposedly contains items that are not music.  I went through the playlist and unchecked anything of the sort, and it still says it's ineligible.  Is there another way to fix this?

    I have tried all those things I even updated the software to the new iOS system and it still did fix my problem.
    What happened is that my garage band looks like it will open then it shuts down.
    I have lot of important things on my garage band and I'm afraid that if I uninstall it deleting it then reinstalling it all my work on it will be gone and I can't have that happen.
    Everyday I am hoping that when i go to open the app that is will work but it doesn't it gets ready to turn on then it shuts off , the app doesn't even open all the way and turns off.
    I really hope I don't have to erase it.
    It'll say it's ,lading my songs then it shuts down .
    If I waited for the App Store to come up with an update for garage band should I wait till then to update my app so it doesn't get damaged . I don't want to erase it and all my data get erased . I figured if I wait for an update then my garage band will reset itself but won't delete my data. I'm not sure if that will help. Is there anything you or anyone else might know that can help me with this matter ?
    Thank you
    Simachyahi

  • I am trying to log into the itunes store for the first time and it asks me to review my account so I do but every time I get to the bit where you fill in your bank details and address it tells me my payment method was declined and that its not valid?

    I am trying to log into the itunes store for the first time and it asks me to review my account so I do but every time I get to the bit where you fill in your bank details and address it tells me my payment method was declined and that its not valid?

    Same here and this is driving me crazy. I can buy, but can't upgrade. Grrr.

  • Error (2901) The operation did not complete successfully because of a parameter or call sequence that is not valid. (The parameter is incorrect (0x80070057))

    We are trying to convert a physical windows 2003 R2 32 bit server to a VM using VMM 2008 R2 with all updates installed. Each time when we scan the system on VMM, it gets this message: Error (2901) The operation did not complete successfully because of
    a parameter or call sequence that is not valid. (The parameter is incorrect (0x80070057)). If I use disk2vhd.exe to convert only C drive, I get parameter is incorrect. Any ideas?
    Bob Lin, MCSE & CNE Networking, Internet, Routing, VPN Networking, Internet, Routing, VPN Troubleshooting on http://www.ChicagoTech.net How to Install and Configure Windows, VMware, Virtualization and Cisco on http://www.HowToNetworking.com

    Hi Sir,
    >> If I use disk2vhd.exe to convert only C drive, I get parameter is incorrect. Any ideas?
    >> gets this message: Error (2901) The operation did not complete successfully because of a parameter or call sequence that is not valid. (The parameter is incorrect (0x80070057)
    Please refer to following article regarding this error :
    http://blogs.technet.com/b/hugofe/archive/2010/07/09/abe.aspx
    Best Regards,
    Elton Ji
    Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected] .

Maybe you are looking for