THe picture gallery functions are primative at the best Notes on the Picture gallery

I played with it this week-end for a while (Olivia did not come to visit so resorted to something to keep me busy).
1) To create a new gallery I had to go the the albumn selection screen (don't click into a albumn!) and add a picture. During that seq you get an option to crate a new gallery. Once created you can move images into the albumn.
A) I would like the ability to add a new gallery without having to add an image to get it going. I suspect the hang-up is the interface wants an image so let it give us the option to choose which image is used.
B) Moving existing images is a pain if you have a lot already. I had to start at the first page and go through each page then move each one at a time then start over for the next image to move. I would like the ability to select multiples and move them to a albumn.
C) Some of the images show the thread where they were originally posted while others do not. Why? Bug?
D) I did not see how to create sub-albumns. Is it pssible? I'd like to sort my image into albumns and sub-albumns.
That is all I have to reoprt.
Ben
Ben Rayner
I am currently active on.. MainStream Preppers
Rayner's Ridge is under construction

I was showcasing the "original thread" feature to my buddy and the images of the model blast furnace lacked the links.
Ben
Ben Rayner
I am currently active on.. MainStream Preppers
Rayner's Ridge is under construction

Similar Messages

Custom Search Help for Functional Area of Cost Centre(KS01/KS02)

Hi,
I need to implement a custom search help and custom enhancement for the field Functional Area in Basic Data tab of Cost Centre Create/Change(KS01/KS02) transactions. Details of the requirement are as below:
1. There will be a custom relation for the Cost Centre category and Functional Area which was maintained thru a SAP standard table TKA05 and a custom table.
2.When the relation to Cost Centre category and Functional Area is a one to one it exist in the TKA05 and if its one to many it will be maintained in the custom table.
3. The requirement is when the Cost Center to Functional area is maintained in table TKA05(One to One) in this case the corresponding Functional Area needs to be populated automatically after entering the cost centre and pressing a enter key by user.
4.When the Cost Centre Category and Functional area does not exist in table TKA05 and existing in custom table(One to Many) in this case the F4 should be enabled for user selection with the list of Functional area values corresponding to the cost centre category entered that are maintained in the custom table.
As per the functionality provided by SAP the input help(F4) of the field Functional area in Cost Center does not have any relation with Cost Centre Category. The existing F4 is from the Value Table(TFKB) attached to the domain of FKBER.
Please provide your valuable inputs to implement the above requirement. Your input will be rewareded.
Thanks in advance,
Regards,
Prasad.

kalyani,
i can see your requirement in below way..
as it just reads: you need to assign the standard cost center help to a z cost center field in component /SAPSRM/WDC_UI_DO_ACC.. which actually is fetched though the component /SAPSRM/WDC_UI_BACKEND_SH
so, if you see the component controller of SAPSRM/WDC_UI_DO_ACC you will see the component
USAGE_SH_F4 /SAPSRM/WDC_UI_BACKEND_SH
USAGE_SH_F4 /SAPSRM/WDC_UI_BACKEND_SH INTERFACECONTROLLER
so you can replicate the same functionality for your z field.
but can you clarify one thing.. why are you going for this z field in place of standard field ?

Error in ME51N - Account object functional area differs from asset master

We are in the middle of going thru an upgrade -
Funds & Functional Area were display fields in the old system but it was recetly changed to required fields in the Asset Master Record (AS01). Now when I try to create a Purchase Requisition for procuring the asset, I get this error - We are in the middle of going thru an upgrade -
Funds & Functional Area were display fields in the old system but it was recetly changed to required fields in the Asset Master Record (AS01). Now when I try to create a Purchase Requisition for procuring the asset, I get this error - Account object functional area differs from that in asset master record. Any suggestions?. Any suggestions?

The functional area what is comming is not the same in Asset accounting as you get from ME51N.
What functional area you get from ME51N and what is the asset.
Is the functinal area in the cost center not the same as you filled in the asset?

Functional Area populating in MIRO during simulation

Hello,
We are in ECC6.0 EHP4, we have a need to Populate "*Functional area*" into table BSEG, for which we have maintained this in PO, and through PO this comes on to MIRO screen, but when I do simulation, The simulation screen does not show "functional area" which in turn does not populate in BSEG, how can we have this value for the field "Functional area" be populated into BSEG, if I have to use an user exit, I need one that is a part if 'MIRO" and updates the BSEG table

Hi Satya,
functional area basically define in FI module as Financial Accounting Global Settings/Financial Accounting Definition/Financial Accounting Global Settings (New)
which is just Typical functional areas are Sales, Production, Marketing, Administration and Research & Development.
so its segregating business by it department as we created via below path:
Financial Accounting Global Settings (New)->Ledgers->Fields->Standard Fields->Functional Area for Cost of Sales Accounting->Define Functional Area
Regards,
Sanjeev

Where does this functional area come from?

Hi,
We have an SCM system which created purchase requestitions in the ERP system. The purchase requisitions then are assigned to a cost center with functional area COS. The GL account has no functional area assigned. Substitution is not in place. Still there is the functional area OPX in the purchase requisition, subsequently PO and in the accounting document of the GR. How come? I can see the purchase req. was created by a RFC user ( I can't find any IDoc in the system).
Is the functional area provided by the SAP SCM system and not derived in the usual way (which would be COS then).
Thanks
Exberliner

Hi,
Pls. check the GL account is Cost element or not. If yes, then Functional area may be derived from its master data or Cost Center assigned to it.
Click on Cost Element tab in FS03 of that Gl account and Company code.
Cheers,

To include a new link in the function area?

Hi all,
I need to include a new link in the function area of the masthead. Could any of you please explain me how to do this?
Also after clicking on this new link on the fucntion area of the masthead, the iview needs to be displayed in the innerpage or the content area of the portal...
thank you
regards
Luke

Hi Luke
Hi
You can modify the par file <b>com.sap.portal.navigation.masthead</b> to achieve this.
Copy the
com.sap.portal.navigation.masthead.par.bak file from
<local_drive>usrsap<instance>JC00j2eecluster server0appssap.comirjservlet_jspirj
ootWEB-INF deploymentpcd to a temporary folder.
Rename the par file to some other namespace and import the new par file into your NWDS.
you have 3 main files in the masthead namely HeaderiView.jsp, LogInRedirect.jsp, LogOffConfirmMsg.jsp.
change the corresponding jsp file to make the changes as per your requirements.Upload and deploy the par file to the Enterprise Portal.
Also go through these links.
Customizing masthead in theme editor
Removing Masthead Function Area
Adding a background picture to masthead
hope this helps.
Regards
Yoga

Functional Area field not getting populated in the AUFK table

Hi Friends,
The table AUFK is the table for Internal Order master data.
The issue which we are facing is:
In a particular Order type, the field 'Functional Area' is suppressed in the field status group for the order master data.
But the cost centers which are maintained in the order master has the functional area field populated with value.
In the table AUFK, the functional area field is populated for some internal orders and not populated for others. In all cases it should pick the functional area from the cost center which is maintained in the internal order.
Please guide us about what can be the possible reason(s) for populating the field in some cases while not populating in other cases.
Thanks a lot in advance for your help.
Regards,
Shilpi

Hi,
maintain the functional area in order master data to ensure 100% functional area is available in AUFK.
I can't tell you the reason why its sometimes appearing and sometimes not bur FUNC_AREA is not picked from responsible/requesting cost center (from master data).
If in customizing of internal order order types a "model-order" is assigned with maintained functional area, this func_area is taken if you create a new order for this ordertype.
Best regards, Christian

I recently upgraded to iOS 8. Looks like the pics I had in my messages are no longer appearing as pictures, rather they are appearing as JPEG files (not broken jpegs). I need to get these pics. Can't figure out how to do it. I'm on an iPhone 5C.

I recently upgraded to iOS 8. Looks like the pics I had in my messages are no longer appearing as pictures, rather they are appearing as JPEG files (not broken jpegs). I need to get these pics. Can't figure out how to do it. I'm on an iPhone 5C.
I've tried resetting my phone, looking for the pics in the new 'deleted' folder. I tried forwarding the jpegs to sees if they'll appear in a new message (but turnout the phone won't let me forward these pics). Apple is trying to say it's the 30 day reason, but I know that is not the problem. ALl of my pics older than 30 days were viewable. It is the upgrade that screwed this up. Help! Important pics!

Try this to learn about using keys:
http://www.apple.com/support/macbasics/
You can also use your PC mouse.
As for iPhoto, it sounds like you were trying to move files around in the library. That is a bib no-no in Aperture or iPhoto.

Functional area(FKBER( field in the selection screen))

Hi,
I have a requirement to add functional area field in the selection screen for a report painter report. This report using library 1VK and table 'CCSS'. I added functional area field in the general data selection . After the execution of report with functional area field filled with value. report not giving any output. do i need to maintain any setting to achieve?
Regards,
Palani

Hi,
How you have filled the values?
It is 16 CHAR long.

Functional area(FKBER field in the selection screen of the report painter))

Hi,
I have a requirement to add functional area field in the selection screen for a report painter report. This report using library 1VK and table 'CCSS'. I added functional area field in the general data selection . After the execution of report with functional area field filled with value. report not giving any output. do i need to maintain any setting to achieve?
Regards,
Palani

1. Call GR22 and click "Characteristics".
2. Check FKBER and assign a position number to it.
3. Save and close the library.
4. Call your report in GRR2 and you should now see FKBER as an available characteristic.
5. Use it in the General Data Selection or as a Lead Column, as per requirement.
Or,
1. Call GR21 and create a custom library. Provide a name and description and also provide a library you can copy from (scan for the best-fit library).
2. Now follow the steps 2 through 5 above to achieve your result.
Hope this helps.
Cheers.

My apple Tv will not airplay, this is the 3rd one i have exchanged and my devices airplay just fine elsewhere, could there be a problem with the wifi even though all of the other functions are working fine?

My apple Tv will not airplay, this is the 3rd one i have exchanged and my devices airplay just fine elsewhere, could there be a problem with the wifi even though all of the other functions are working fine?

Hello there, AntRambo.
The following Knowledge Base articles may provides some steps to go over for troubleshooting your issue:
iOS and OS X: Recommended settings for Wi-Fi routers and access points
http://support.apple.com/kb/HT4199
And also the following:
iOS: Troubleshooting AirPlay and AirPlay Mirroring
http://support.apple.com/kb/TS4215
Particularly but not exclusively of note:
If the AirPlay icon doesn't appear
Ensure that you have followed the steps in using AirPlay and AirPlay Mirroring.
If you are still unable to see the AirPlay icon , try one of the following steps:
If trying to AirPlay, or AirPlay mirror, to your Apple TV, ensure that AirPlay is enabled on your Apple TV as well. You can enable or disable AirPlay on Apple TV in the AirPlay menu: Settings > AirPlay.
Check Internet or network connectivity on all affected devices. Some content requires an Internet connection to authorize content playback. AirPlay capabilities may be limited if your network is not connected to the Internet.
If attempting to use AirPlay from a third-party app or a website from your Safari app on your iOS device, confirm that the app or website is AirPlay compatible (refer to the developers of the app or website for additional information).
Thanks for reaching out to Apple Support Communities.
Cheers,
Pedro

Update the functional area (AUFK-FUNC_AREA) directly in the table AUFK

Hello,
The OSS note 150959 gives a report, which directly updates the table field AUFK-PRCTR (profit center). Have you ever tried the same thing with the Functional Area (I am afraid to cause database incoherencies, if I do this) ?
We have to do this both for production and maintenance orders.
Thank's a lot for your answer.
Best regards,
Holger

Hello Rajesha,
We have to make a mass update of all production and maintenance orders in our system.
So we have to write a program, which is doing this.
In order to avoid the direct update of the table AUFK, we will write a batch input.
Best regards,
Holger

FS10N ADD Functional area in the parameter screen

hi,
we need to add functional area to the parameter screen of FS10N.
today in the parameter screen of FS10N appears the next fields: gl account, company code, fiscal year, business area
please advice
thanks,
meir

HI,
which SAP release? FS10N does not support the functional area selection on the selection screen. ECC 60 (new T-Code FAGLB03 ) does in SAP standard. Guess its time to upgrade
BR Christian

Relation between business process and functional area during the role search

Hi Experts,
We have 2 functional areas in which we have different business process involved.
During the Access request, if the user selects one functional area then business process related to that functional area should come.
Is there any functionality in GRC, where the mapping between functional are and business process to be done?
Thanks,
Sriram

Hi Sri,
there is relationship between 'Business process' and 'Sub-business' process as in configuration parameter you can setup that once business process is selected only relevant sub-process will be selected.
There is no such a relation between functional area and business process.
Filip

Field functional area does not appear as an entry field into the document..

Hi,
We are using the functional area field in our system. In order to access this field, we proceeded
to customize the system as follows:
- We already activate Cost of Sales Accounting for our Company Code.
- The field functional area was set optional through transaction OB41, for the posting keys required.
- The field functional area was set optional using transaction OB14, for the field status group assigned to the GL accounts.
However, we cannot enter the area functional when we are posting documents related to customers and vendors.
Although the field functional area was set optional, it does not appear as an entry field into the document screen for the
different transactions: fb70, fb60, f-02,fb01. It is only happening when we areentering the document position for the vendor/customer.
Regards,
Efrain

Hi,
In FB70 or FB60 change the layout ........ select the line item layout configuration, you get a separate Table Settings screen pop up where in you need to select "Administrator" button the system displays another pop up window where in you can check whether the Functional Area field is checked as invisible if so remove the check mark and active the settings.
Kind Regards

THe picture gallery functions are primative at the best Notes on the Picture gallery

Similar Messages

Maybe you are looking for